ACC-SYSTEM
218 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.1 | NodeaccSystem | |||
| 1.3.6.1.4.1.5.1.1.1.1 | NodeaccSysInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.1 | ScalaraccUnitName | read-write | mandatory | A printable ASCII string up to 32 octets long that is used to refer to a physical unit. This name is used in the prompt displayed at the maintenance terminal. |
| 1.3.6.1.4.1.5.1.1.1.1.2 | ScalaraccRomId | read-only | mandatory | A printable ASCII string that contains information about the hardware and the firmware (NOT the software). |
| 1.3.6.1.4.1.5.1.1.1.1.3 | ScalaraccSwVersion | read-only | mandatory | A printable ASCII string representing the software version number of the running code. |
| 1.3.6.1.4.1.5.1.1.1.1.4 | ScalaraccReset | read-write | mandatory | A Set command on this object will cause an immediate reset of the unit. |
| 1.3.6.1.4.1.5.1.1.1.1.5 | TableaccMemStatTable | not-accessible | mandatory | Information about data buffer pools. Instance is pool number. 1 - 7 is D RAM 8 is M RAM 9 - is C RAM 10 - is H RAM |
| 1.3.6.1.4.1.5.1.1.1.1.5.1 | RowaccMemStatEntry | not-accessible | mandatory | A single entry in the Memory stats table |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.1 | ColumnaccMemBlkEntSize | read-only | mandatory | Size (bytes) of these buffers |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.2 | ColumnaccMemBlkEntTotal | read-only | mandatory | Total number of these buffers in pool, whether or not they are in use |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.3 | ColumnaccMemBlkEntMax | read-only | mandatory | High water mark of usage of buffers |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.4 | ColumnaccMemBlkEntInUse | read-only | mandatory | Number of buffers currently in use. |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.5 | ColumnaccMemBlkEntFails | read-only | mandatory | Number of times requests were made for a buffer of this size that failed because none were avaliable. |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.6 | ColumnaccMemBlkEntType | read-only | mandatory | Numeric classification of the buffer. |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.7 | ColumnaccMemBlkEntAllocs | read-only | mandatory | Number of times a request was made for a buffer of this size. |
| 1.3.6.1.4.1.5.1.1.1.1.5.1.8 | ColumnaccMemBlkEntInitial | read-only | mandatory | Number of buffers of this size allocated at initialization. |
| 1.3.6.1.4.1.5.1.1.1.1.6 | NodeaccNvm | |||
| 1.3.6.1.4.1.5.1.1.1.1.6.1 | ScalaraccNvmTotalBlks | read-only | mandatory | Total number of NVM blocks. |
| 1.3.6.1.4.1.5.1.1.1.1.6.2 | ScalaraccNvmBlkSize | read-only | mandatory | NVM block size in bytes. |
| 1.3.6.1.4.1.5.1.1.1.1.6.3 | ScalaraccNvmDirSize | read-only | mandatory | The NVM directory size. |
| 1.3.6.1.4.1.5.1.1.1.1.6.4 | ScalaraccNvmFreeBlks | read-only | mandatory | The number of free NVM blocks. |
| 1.3.6.1.4.1.5.1.1.1.1.6.5 | ScalaraccNvmFileNumber | read-only | mandatory | The NVM file number. |
| 1.3.6.1.4.1.5.1.1.1.1.6.6 | ScalaraccNvmFileName | read-only | mandatory | The NVM file name. |
| 1.3.6.1.4.1.5.1.1.1.1.6.7 | ScalaraccNvmFileSize | read-only | mandatory | The NVM file size in bytes. |
| 1.3.6.1.4.1.5.1.1.1.1.7 | NodeaccSysConfigInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.7.1 | ScalaraccConfiguration | read-write | mandatory | Set the action to perform on the active configuration. A set to load or default will immediately reset the unit. On the restart the new configuration (either a… |
| 1.3.6.1.4.1.5.1.1.1.1.7.2 | ScalaraccConfigurationStatus | read-only | mandatory | The current state of the active configuration. The value changed indicates that the active configuration has changed since the last time it was saved to NVM. |
| 1.3.6.1.4.1.5.1.1.1.1.8 | ScalaraccScriptHalt | read-write | mandatory | A Set command on this object will cause an immediate halt to any existing configuration script execution. |
| 1.3.6.1.4.1.5.1.1.1.1.9 | NodeaccScriptCont | |||
| 1.3.6.1.4.1.5.1.1.1.1.9.1 | ScalaraccScriptContServer | read-write | mandatory | The IP address of the server holding the configuration script to be downloaded and executed following the next reset. |
| 1.3.6.1.4.1.5.1.1.1.1.9.2 | ScalaraccScriptContFile | read-write | mandatory | The filename (with complete pathname) of the configuration script to be downloaded and executed following the next reset. |
| 1.3.6.1.4.1.5.1.1.1.1.10 | ScalaraccSysUpgradeCmd | read-only | mandatory | On platforms that execute the application from Flash and that support the optional Flash SIMM memory for TFTP upgrades, it indicates the upgrade command (SL or… |
| 1.3.6.1.4.1.5.1.1.1.1.11 | ScalaraccSysHWType | read-only | mandatory | The hardware platform product name |
| 1.3.6.1.4.1.5.1.1.1.1.12 | ScalaraccSysProcType | read-only | mandatory | Type of processor on this platform |
| 1.3.6.1.4.1.5.1.1.1.1.13 | ScalaraccSysLocalRam | read-only | mandatory | The amount of local RAM installed in the system in kilobytes |
| 1.3.6.1.4.1.5.1.1.1.1.14 | ScalaraccSysGlobalRam | read-only | mandatory | The amount of global RAM installed in the system in kilobytes |
| 1.3.6.1.4.1.5.1.1.1.1.15 | ScalaraccSysPowerSupply | read-only | mandatory | Type of processor on this platform |
| 1.3.6.1.4.1.5.1.1.1.1.16 | TableaccMemPoolTable | not-accessible | mandatory | A table of memory pools supported by this unit. Each pool describes a physical memory resource. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1 | RowaccMemPoolEntry | not-accessible | mandatory | An entry of information about a memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.1 | ColumnaccMemPoolName | read-only | mandatory | A printable ASCII string describing this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.2 | ColumnaccMemPoolMaximum | read-only | mandatory | The maximum amount of memory in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.3 | ColumnaccMemPoolBytes | read-only | mandatory | The amount of memory currently available in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.4 | ColumnaccMemPoolFrags | read-only | mandatory | The number of times this memory pool has been fragmented. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.5 | ColumnaccMemPoolAlign | read-only | mandatory | The alignment this memory pool maintains. For example, a 4 in this field means memory from this pool is aligned on 32-bit boundaries. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.6 | ColumnaccMemPoolAllocs | read-only | mandatory | The number of allocation requests addressed to this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.16.1.7 | ColumnaccMemPoolFails | read-only | mandatory | The number of times an allocation request addressed to this memory could not be satisfied. |
| 1.3.6.1.4.1.5.1.1.1.1.17 | ScalaraccMemAddDblk | read-only | mandatory | Number of D blocks added. |
| 1.3.6.1.4.1.5.1.1.1.1.18 | TableaccSlvConfTable | not-accessible | mandatory | Table of slave CPU configuration parameters. |
| 1.3.6.1.4.1.5.1.1.1.1.18.1 | RowaccSlvConfEntry | not-accessible | mandatory | A single entry in the slave CPU configuration Table |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.1 | ColumnaccSlvConfCPUIndex | read-only | mandatory | Slave CPU Index |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.2 | ColumnaccSlvConfCPUID | read-only | mandatory | Slave CPU ID |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.3 | ColumnaccSlvConfSysDesc | read-only | mandatory | Slave CPU System Description |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.4 | ColumnaccSlvConfSWVers | read-only | mandatory | Slave CPU Software Version |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.5 | ColumnaccSlvConfProcType | read-only | mandatory | Slave CPU Processor Type |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.6 | ColumnaccSlvConfLocalRam | read-only | mandatory | Slave CPU Local RAM Size (kb) |
| 1.3.6.1.4.1.5.1.1.1.1.18.1.7 | ColumnaccSlvConfGlobalRam | read-only | mandatory | Slave CPU Global RAM Size (kb) |
| 1.3.6.1.4.1.5.1.1.1.1.19 | TableaccSlvMemBlkTable | not-accessible | mandatory | Table of entries in the slave CPU configuration Table. |
| 1.3.6.1.4.1.5.1.1.1.1.19.1 | RowaccSlvMemBlkEntry | not-accessible | mandatory | A single entry in the slave CPU configuration Table |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.3 | ColumnaccSlvMemCPUID | read-only | mandatory | Slave CPU ID |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.4 | ColumnaccSlvMemBlkEntSize | read-only | mandatory | Size (bytes) of these buffers |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.5 | ColumnaccSlvMemBlkEntTotal | read-only | mandatory | Total number of these buffers in pool, whether or not they are in use |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.6 | ColumnaccSlvMemBlkEntMax | read-only | mandatory | High water mark of usage of buffers |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.7 | ColumnaccSlvMemBlkEntInUse | read-only | mandatory | Number of buffers currently in use. |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.8 | ColumnaccSlvMemBlkEntFails | read-only | mandatory | Number of times requests were made for a buffer of this size that failed because none were avaliable. |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.9 | ColumnaccSlvMemBlkEntType | read-only | mandatory | Numeric classification of the buffer. |
| 1.3.6.1.4.1.5.1.1.1.1.19.1.10 | ColumnaccSlvMemBlkEntAllocs | read-only | mandatory | Number of times a request was made for a buffer of this size. |
| 1.3.6.1.4.1.5.1.1.1.1.20 | NodeaccSlvMemPool | |||
| 1.3.6.1.4.1.5.1.1.1.1.20.1 | TableaccSlvMemPoolTable | not-accessible | mandatory | A table of memory pools supported by this unit. Each pool describes a physical memory resource. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1 | RowaccSlvMemPoolEntry | not-accessible | mandatory | An entry of information about a memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.1 | ColumnaccSlvMemPoolCPUID | read-only | mandatory | Slave CPU ID |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.2 | ColumnaccSlvMemPoolName | read-only | mandatory | A printable ASCII string describing this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.3 | ColumnaccSlvMemPoolMaximum | read-only | mandatory | The maximum amount of memory in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.4 | ColumnaccSlvMemPoolBytes | read-only | mandatory | The amount of memory currently available in this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.5 | ColumnaccSlvMemPoolFrags | read-only | mandatory | The number of times this memory pool has been fragmented. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.6 | ColumnaccSlvMemPoolAlign | read-only | mandatory | The alignment this memory pool maintains. For example, a 4 in this field means memory from this pool is aligned on 32-bit boundaries. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.7 | ColumnaccSlvMemPoolAllocs | read-only | mandatory | The number of allocation requests addressed to this memory pool. |
| 1.3.6.1.4.1.5.1.1.1.1.20.1.1.8 | ColumnaccSlvMemPoolFails | read-only | mandatory | The number of times an allocation request addressed to this memory could not be satisfied. |
| 1.3.6.1.4.1.5.1.1.1.1.21 | TableaccSlvSysTable | not-accessible | mandatory | Information about slave CPU system stats. |
| 1.3.6.1.4.1.5.1.1.1.1.21.1 | RowaccSlvSysEntry | not-accessible | mandatory | A single entry in the slave CPU system stats table |
| 1.3.6.1.4.1.5.1.1.1.1.21.1.1 | ColumnaccSlvSysUpTime | read-only | mandatory | Slave system uptime |
| 1.3.6.1.4.1.5.1.1.1.1.21.1.2 | ColumnaccSlvSysCpuAvgShort | read-only | mandatory | Slave system current CPU usage. |
| 1.3.6.1.4.1.5.1.1.1.1.21.1.3 | ColumnaccSlvSysCpuAvgLong | read-only | mandatory | Slave system average CPU usage. |
| 1.3.6.1.4.1.5.1.1.1.1.22 | NodeaccMem | |||
| 1.3.6.1.4.1.5.1.1.1.1.22.1 | TableaccMemDblkIncTable | not-accessible | mandatory | Table of Memory Dblock Increments |
| 1.3.6.1.4.1.5.1.1.1.1.22.1.1 | RowaccMemDblkIncEntry | not-accessible | mandatory | A single entry of the Memory Dblock Increment Table |
| 1.3.6.1.4.1.5.1.1.1.1.22.1.1.1 | ColumnaccMemDblkIndex | read-only | mandatory | The index of this entry in the Memory Dblock Increment Table |
| 1.3.6.1.4.1.5.1.1.1.1.22.1.1.2 | ColumnaccMemDblkSize | read-only | mandatory | The Size of the Dblock for this entry in the Mem Dblock Inc Table |
| 1.3.6.1.4.1.5.1.1.1.1.22.1.1.3 | ColumnaccMemDblkIncrement | read-write | mandatory | The User specified Increment of this entry Memory Dblock Increment Table |
| 1.3.6.1.4.1.5.1.1.1.1.22.2 | NodeaccOpt | |||
| 1.3.6.1.4.1.5.1.1.1.1.22.2.1 | ScalaraccMemEMEStatus | read-write | mandatory | The Global Memory Optimizer (EME) Status |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.2 | ScalaraccMemEMEMaxReclMem | read-only | mandatory | The Maximum Memory in bytes available for Reclaimation by the Memory Optimizer (EME) |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.3 | ScalaraccMemEMECurReclMem | read-only | mandatory | The Memory in bytes Reclaimed by the Memory Optimizer (EME) |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4 | TableaccMemOptTable | not-accessible | mandatory | Table of Memory Optimizer |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1 | RowaccMemOptEntry | not-accessible | mandatory | A single entry of the Memory Optimizer Table |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.1 | ColumnaccMemOptimiserFeature | read-only | mandatory | The Reclaimable Feature in the Memory Optimizer Table for this entry |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.2 | ColumnaccMemOptimiserMemory | read-only | mandatory | The amount of memory (in bytes) associated with the reclaimable feature under consideration |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.3 | ColumnaccMemOptimiserPref | read-write | mandatory | The User's preference for this Feature |
| 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.4 | ColumnaccMemOptimiserStatus | read-only | mandatory | The Current Status for this Feature |
| 1.3.6.1.4.1.5.1.1.1.1.23 | NodeaccMacro | |||
| 1.3.6.1.4.1.5.1.1.1.1.23.1 | ScalaraccMacroExecute | read-write | mandatory | Macro Name to Execute |
| 1.3.6.1.4.1.5.1.1.1.1.24 | ScalaraccSwRegistrationKey | read-write | mandatory | Software Registration key to upgrade software levels. |
| 1.3.6.1.4.1.5.1.1.1.1.25 | NodeaccMACAddr | |||
| 1.3.6.1.4.1.5.1.1.1.1.25.1 | ScalaraccSysMACAddrUser | read-write | mandatory | MAC address to be used to override rom MAC address. A value of 0 means use the value stored in rom. Any other value, overrides the ROM MAC address. |
| 1.3.6.1.4.1.5.1.1.1.1.26 | NodeaccSysMessage | |||
| 1.3.6.1.4.1.5.1.1.1.1.26.1 | NodeaccSysMsgInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.26.1.1 | ScalaraccSysMsgLevel | read-write | mandatory | The severity level of system message allowed to be generated |
| 1.3.6.1.4.1.5.1.1.1.1.26.1.2 | ScalaraccWinDefLenNetman | read-write | mandatory | The session window default length NETMAN |
| 1.3.6.1.4.1.5.1.1.1.1.26.1.3 | ScalaraccWinDefLenPublic | read-write | mandatory | The session window default length PUBLIC |
| 1.3.6.1.4.1.5.1.1.1.1.26.1.4 | ScalaraccWinDefWidNetman | read-write | mandatory | The session window default width NETMAN |
| 1.3.6.1.4.1.5.1.1.1.1.26.1.5 | ScalaraccWinDefWidPublic | read-write | mandatory | The session window default width PUBLIC |
| 1.3.6.1.4.1.5.1.1.1.1.26.2 | NodeaccUserInfo | |||
| 1.3.6.1.4.1.5.1.1.1.1.26.2.1 | ScalaraccUserTrapMsgEntry | read-write | mandatory | A message to be sent through an SNMP trap. |
| 1.3.6.1.4.1.5.1.1.1.1.30 | NodeaccVirtualPort | |||
| 1.3.6.1.4.1.5.1.1.1.1.30.1 | NodeaccVirtualPortGeneral | |||
| 1.3.6.1.4.1.5.1.1.1.1.30.1.1 | ScalaraccVirtualPortCount | read-write | mandatory | Number of Virtual ports available on the platform |
| 1.3.6.1.4.1.5.1.1.1.1.30.1.2 | ScalaraccVirtualPortXotCount | read-write | mandatory | Number of XOT Virtual ports available on the platform |
| 1.3.6.1.4.1.5.1.1.1.1.32 | NodeaccSystemGracefulShutdown | |||
| 1.3.6.1.4.1.5.1.1.1.1.32.1 | ScalaraccSystemGracefulShutdownState | read-write | mandatory | System Graceful Shutdown state |
| 1.3.6.1.4.1.5.1.1.1.1.32.2 | ScalaraccSystemGracefulShutdownTO | read-write | mandatory | System graceful shutdown timeout. When Timeout is exceeded, the system will reset automatically |
| 1.3.6.1.4.1.5.1.1.1.1.33 | NodeaccSystemAuthGeneral | |||
| 1.3.6.1.4.1.5.1.1.1.1.33.1 | ScalaraccSystemAuthMode | read-write | mandatory | System authentication mode |
| 1.3.6.1.4.1.5.1.1.1.1.33.2 | ScalaraccSystemAuthAccessPart | read-write | mandatory | Access Partn for RADIUS servers |
| 1.3.6.1.4.1.5.1.1.1.1.34 | NodeaccSystemAccess | |||
| 1.3.6.1.4.1.5.1.1.1.1.34.1 | ScalaraccPscopeEnable | read-write | mandatory | Permits or denies use of built-in packet monitoring functionality (PSCOPE) |
| 1.3.6.1.4.1.5.1.1.1.1.34.2 | ScalaraccDBscopeCntl | read-write | mandatory | Controls use of built-in debugger functionality (DBSCOPE). Currently non-zero permits full functionality. |
| 1.3.6.1.4.1.5.1.1.1.2 | NodeaccSessionCtrl | |||
| 1.3.6.1.4.1.5.1.1.1.2.1 | ScalaraccLogin | read-write | mandatory | A read attempt of this object is interpreted as a request for login to the unit. The instance is an ASCII string with the following (case sensitive) format: Co… |
| 1.3.6.1.4.1.5.1.1.1.2.2 | ScalaraccLogout | read-only | mandatory | A read attempt of this object is interpreted as a request for logout to the unit. The instance is an ASCII string with the following format: CommunityString:Pa… |
| 1.3.6.1.4.1.5.1.1.1.2.3 | ScalaraccLoginTimeout | read-write | mandatory | Session inactivity timer. Zero disables timer (no timeout) Default value is zero Range is 0-86400 seconds |
| 1.3.6.1.4.1.5.1.1.1.3 | TableaccTrapTable | not-accessible | mandatory | A table of systems to which Trap Messages generated by this unit shall be sent. To delete an entry, a SetRequest-PDU for the specific instance of accTrapAddr w… |
| 1.3.6.1.4.1.5.1.1.1.3.1 | RowaccTrapEntry | not-accessible | mandatory | A Trap Table entry |
| 1.3.6.1.4.1.5.1.1.1.3.1.1 | ColumnaccTrapAddr | read-write | mandatory | An IP address to which SNMP traps generated by the unit are sent. |
| 1.3.6.1.4.1.5.1.1.1.3.1.2 | ColumnaccTrapSeverity | read-write | mandatory | severity level of the traps to be sent ACC products generate enterprise specific traps for which different severity levels from 1 through 7 are assigned. Level… |
| 1.3.6.1.4.1.5.1.1.1.4 | NodeaccClock | |||
| 1.3.6.1.4.1.5.1.1.1.4.1 | ScalaraccDate | read-write | deprecated | The octet string of six bytes representing the date and time has the following format: YYMMDDHHMMSS where the valid range of values for each of the bytes is as… |
| 1.3.6.1.4.1.5.1.1.1.4.2 | ScalaraccUToffset | read-write | mandatory | 3-byte date string, HH MM SS |
| 1.3.6.1.4.1.5.1.1.1.4.3 | ScalaraccSysBootTime | read-only | deprecated | 3-byte date string, HH MM SS |
| 1.3.6.1.4.1.5.1.1.1.4.4 | ScalaraccSysCpuAvgShort | read-only | mandatory | percentage CPU used over the last minute |
| 1.3.6.1.4.1.5.1.1.1.4.5 | ScalaraccSysCpuAvgLong | read-only | mandatory | percentage CPU used over the last 5 minutes |
| 1.3.6.1.4.1.5.1.1.1.4.6 | ScalaraccSysDataSwitchStatus | read-only | mandatory | The status of the hardware switch, to determine whether Data calls could be initiated/accepted over the ISDN line. ONLY voice calls will be accepted or initiat… |
| 1.3.6.1.4.1.5.1.1.1.4.8 | ScalaraccSysLastConfig | read-write | mandatory | System Last Configuration Time |
| 1.3.6.1.4.1.5.1.1.1.4.10 | ScalaraccDateY2K | read-write | mandatory | The seven byte long octet string indicates system date and time. The octet string represents year 2000 compliant date and time, and is laid out in the followin… |
| 1.3.6.1.4.1.5.1.1.1.4.11 | ScalaraccSysBootTimeY2K | read-only | mandatory | The seven bytes long octet string indicates system boot time. The octet string represents year 2000 compliant date and time, and is laid out in the following s… |
| 1.3.6.1.4.1.5.1.1.1.4.12 | ScalaraccDay | read-write | mandatory | Day of the week (enumnerated MON-SUN [0-6]) |
| 1.3.6.1.4.1.5.1.1.1.6 | TableaccAccessTable | not-accessible | mandatory | A table of users authorized to log in to this unit. To delete an entry, a SetRequest-PDU for the specific instance of accAccessAddr with a NULL value encoding … |
| 1.3.6.1.4.1.5.1.1.1.6.1 | RowaccAccessEntry | not-accessible | mandatory | An entry of information about an authorized user. |
| 1.3.6.1.4.1.5.1.1.1.6.1.1 | ColumnaccAccessCmty | read-write | mandatory | Access community |
| 1.3.6.1.4.1.5.1.1.1.6.1.2 | ColumnaccAccessAddr | read-write | mandatory | IP address from which a login request is honored. |
| 1.3.6.1.4.1.5.1.1.1.6.1.3 | ColumnaccAccessNetMask | read-write | mandatory | Subnet mask used to validate login requests. |
| 1.3.6.1.4.1.5.1.1.1.6.1.4 | ColumnaccAccessUdpPort | read-write | mandatory | UDP port number of the SNMP application. |
| 1.3.6.1.4.1.5.1.1.1.7 | ScalaraccReload | read-write | mandatory | Time until system reload shall occur. Upon expiry of the timer, the system will load and execute a new image of the application code. The load file will come f… |
| 1.3.6.1.4.1.5.1.1.1.8 | NodeaccIfNames | |||
| 1.3.6.1.4.1.5.1.1.1.8.1 | ScalaraccIfNumNames | read-only | mandatory | Number of interfaces (physical and logical). There are this many entries in the Name table. |
| 1.3.6.1.4.1.5.1.1.1.8.2 | TableaccIfNameTable | not-accessible | mandatory | A table of of mnemonic 'names' for physical and logical interfaces |
| 1.3.6.1.4.1.5.1.1.1.8.2.1 | RowaccIfNameEntry | not-accessible | mandatory | An entry in the Interface Name table |
| 1.3.6.1.4.1.5.1.1.1.8.2.1.1 | ColumnaccIfNameIndex | read-only | mandatory | Interface number |
| 1.3.6.1.4.1.5.1.1.1.8.2.1.2 | ColumnaccIfName | read-write | mandatory | Mnemonic name for this interface |
| 1.3.6.1.4.1.5.1.1.1.8.2.1.3 | ColumnaccIfNameDefault | read-only | mandatory | Default Mnemonic name for this interface. The interface may always be referred to by this name. |
| 1.3.6.1.4.1.5.1.1.1.9 | TableaccIfGroupTable | not-accessible | mandatory | A table of interface group descriptors supported by this unit. Interface groups may be populated by physical or logical interfaces, or combinations of the two. |
| 1.3.6.1.4.1.5.1.1.1.9.1 | RowaccIfGroupEntry | not-accessible | mandatory | An entry of information about an interface group. |
| 1.3.6.1.4.1.5.1.1.1.9.1.1 | ColumnaccIFGroupIndex | read-only | mandatory | Index for the accIfGroupTable. |
| 1.3.6.1.4.1.5.1.1.1.9.1.2 | ColumnaccIFGroupName | read-only | mandatory | If accIFGroupIndexBase and accIFGroupIndexMax are equal then this object provides the full name of the port, else this object has the prefix of the port name. … |
| 1.3.6.1.4.1.5.1.1.1.9.1.3 | ColumnaccIFGroupType | read-only | mandatory | Type of port group |
| 1.3.6.1.4.1.5.1.1.1.9.1.4 | ColumnaccIFGroupIndexBase | read-only | mandatory | Lowest IFIndex in this IFGroup |
| 1.3.6.1.4.1.5.1.1.1.9.1.5 | ColumnaccIFGroupIndexMax | read-only | mandatory | The number of interfaces supported in this IFGroup |
| 1.3.6.1.4.1.5.1.1.1.9.1.6 | ColumnaccIFGroupNameDefault | read-only | mandatory | If accIFGroupIndexBase and accIFGroupIndexMax are equal then this object provides the full name of the port, else this object has the prefix of the port name. … |
| 1.3.6.1.4.1.5.1.1.1.10 | NodeaccTrapLog | |||
| 1.3.6.1.4.1.5.1.1.1.10.1 | ScalaraccTrapLogLevel | read-write | mandatory | The base severity level at which traps are recorded in the log. Traps with values greater than this level will not be recorded in the log. |
| 1.3.6.1.4.1.5.1.1.1.10.2 | ScalaraccTrapLogSaveAction | read-write | mandatory | Setting the value to save-now writes the current trap log to permanent storage. |
| 1.3.6.1.4.1.5.1.1.1.10.3 | ScalaraccTrapLogBufSize | read-write | mandatory | The trap log buffer size in kilobytes. |
| 1.3.6.1.4.1.5.1.1.1.10.4 | TableaccTrapLogTable | not-accessible | mandatory | The trap logging table. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1 | RowaccTrapLogEntry | not-accessible | mandatory | A single trap log entry. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.1 | ColumnaccTrapLogTblTime | read-only | mandatory | SysUpTime when trap occurred. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.2 | ColumnaccTrapLogTblType | read-only | mandatory | SysUpTime when trap occurred. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.3 | ColumnaccTrapLogTblLevel | read-only | mandatory | The severity level associated with this trap. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.4 | ColumnaccTrapLogTblData | read-only | mandatory | The text message of the trap. |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.6 | ColumnaccTrapLogSeqNum | read-only | mandatory | The Global Sequence Number for all Traps generated in the System |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.7 | ColumnaccTrapLogSeverityType | read-only | mandatory | Severity type of the Trap generated |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.8 | ColumnaccTrapLogEnterpriseOID | read-only | mandatory | Enterprise OID for the sent trap |
| 1.3.6.1.4.1.5.1.1.1.10.4.1.9 | ColumnaccSpecificTrapNum | read-only | mandatory | Specific Trap number |
| 1.3.6.1.4.1.5.1.1.1.10.5 | TableaccTrapLogSumTable | not-accessible | mandatory | The trap logging table. |
| 1.3.6.1.4.1.5.1.1.1.10.5.1 | RowaccTrapLogSumEntry | not-accessible | mandatory | A single trap log entry. |
| 1.3.6.1.4.1.5.1.1.1.10.5.1.1 | ColumnaccTrapLogSumTime | read-only | mandatory | SysUpTime when trap occurred. |
| 1.3.6.1.4.1.5.1.1.1.10.5.1.2 | ColumnaccTrapLogSumType | read-only | mandatory | The type of trap associated with this entry. |
| 1.3.6.1.4.1.5.1.1.1.10.5.1.3 | ColumnaccTrapLogSumData | read-only | mandatory | The text message of the trap. |
| 1.3.6.1.4.1.5.1.1.1.13 | TableaccSeepTable | not-accessible | mandatory | The SEEP information table. |
| 1.3.6.1.4.1.5.1.1.1.13.1 | RowaccSeepEntry | not-accessible | mandatory | A single SEEP information table entry. |
| 1.3.6.1.4.1.5.1.1.1.13.1.1 | ColumnaccSeepEntrySlot | read-only | mandatory | The slot from which the SEEP information is taken. |
| 1.3.6.1.4.1.5.1.1.1.13.1.2 | ColumnaccSeepEntryType | read-only | mandatory | The type of SEEP. |
| 1.3.6.1.4.1.5.1.1.1.13.1.3 | ColumnaccSeepEntrySerial | read-only | mandatory | The serial number of the SEEP. |
| 1.3.6.1.4.1.5.1.1.1.13.1.4 | ColumnaccSeepEntryAssembly | read-only | mandatory | The assembly description of the SEEP. |
| 1.3.6.1.4.1.5.1.1.1.13.1.5 | ColumnaccSeepEntryRev | read-only | mandatory | The revision number of the SEEP. |
| 1.3.6.1.4.1.5.1.1.1.13.1.6 | ColumnaccSeepEntryDate | read-only | mandatory | The date contained in the SEEP. |
| 1.3.6.1.4.1.5.1.1.1.14 | NodeaccStandbyInfo | |||
| 1.3.6.1.4.1.5.1.1.1.14.1 | ScalaraccStandbySysDescr | read-only | mandatory | System description for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.2 | ScalaraccStandbySoftwareVersion | read-only | mandatory | Software version of redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.3 | ScalaraccStandbySysProcType | read-only | mandatory | System description for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.4 | ScalaraccStandbySysLocalRam | read-only | mandatory | Local RAM size for redundant processor in kilobytes. |
| 1.3.6.1.4.1.5.1.1.1.14.5 | ScalaraccStandbySysGlobalRam | read-only | mandatory | Global RAM size for redundant processor in kilobytes. |
| 1.3.6.1.4.1.5.1.1.1.14.6 | ScalaraccStandbyFsVolStatus | read-only | mandatory | Flash volume status for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.7 | ScalaraccStandbyFsCfgStatus | read-only | mandatory | Configuration status for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.8 | ScalaraccStandbyFsLoadFtkFile | read-only | mandatory | Current flash toolkit file redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.9 | ScalaraccStandbyFsLoadAplFile | read-only | mandatory | Current application file for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.10 | ScalaraccStandbyFsLoadDiaFile | read-only | mandatory | Current application file for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.14.11 | ScalaraccStandbySysHwVers | read-only | mandatory | Hardware versions for redundant processor. |
| 1.3.6.1.4.1.5.1.1.1.15 | TableaccSyslogTable | not-accessible | mandatory | A table of systems to which Syslog Messages generated by this unit shall be sent. To delete an entry, a SetRequest-PDU for the specific instance of accSyslogAd… |
| 1.3.6.1.4.1.5.1.1.1.15.1 | RowaccSyslogEntry | not-accessible | mandatory | A Syslog Table entry |
| 1.3.6.1.4.1.5.1.1.1.15.1.1 | ColumnaccSyslogAddr | read-write | mandatory | An IP address to which syslog messages generated by the unit are sent. |
| 1.3.6.1.4.1.5.1.1.1.15.1.2 | ColumnaccSyslogSeverity | read-write | mandatory | severity level of the messages to be sent. |
| 1.3.6.1.4.1.5.1.1.1.15.1.3 | ColumnaccSyslogFacility | read-write | mandatory | Facility identifier to use in syslog messages |
| 1.3.6.1.4.1.5.1.1.1.16 | NodeaccIcpTraps | |||
| 1.3.6.1.4.1.5.1.1.1.16.1 | NodeaccIcpInfoTrap | Indicates that status data ring full while writing data passed in status calls into structure used for passing status data. SEVERITY-DEFAULT: Minor EVENTTYPE-D… | ||
| 1.3.6.1.4.1.5.1.1.1.16.1 | ScalaraccIcpTrapMsg | read-only | mandatory | ICP Trap Message |
| 1.3.6.1.4.1.5.1.1.1.18 | ScalaraccTrapSequencingStatus | read-write | mandatory | Indicates trap sequencing feature is On or Off. When set to On, a accTrapLogSeqNum varbind will be appended to every trap issued by the system, and will always… |
| 1.3.6.1.4.1.5.1.1.1.26 | TableaccSystemServiceTable | not-accessible | mandatory | A table of changeable TCP/UDP services. |
| 1.3.6.1.4.1.5.1.1.1.26.1 | RowaccSystemServiceEntry | not-accessible | mandatory | An entry of information about System Service. |
| 1.3.6.1.4.1.5.1.1.1.26.1.1 | ColumnaccSystemService | read-write | mandatory | This object is used to identify the TCP/UDP service whose port number is being changed. |
| 1.3.6.1.4.1.5.1.1.1.26.1.2 | ColumnaccSystemPort | read-write | mandatory | This object is used to set the TCP/UDP service port associated with various system services. |