ACMIB
3521 objects
Lucent Access Concentrator, Release 6.2
Imported Objects
| RFC1213-MIB | ifIndex mib-2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751 | Nodelucent | |||
| 1.3.6.1.4.1.1751.2 | Nodemibs | |||
| 1.3.6.1.4.1.1751.2.18 | IdentityacMIB | Lucent Access Concentrator, Release 6.2 | ||
| 1.3.6.1.4.1.1751.2.18.1 | NodesysConfig | |||
| 1.3.6.1.4.1.1751.2.18.1.1 | ScalarsiteName | read-write | current | site name - ascii |
| 1.3.6.1.4.1.1751.2.18.1.2 | ScalarsiteID | read-write | current | site id - numerical |
| 1.3.6.1.4.1.1751.2.18.1.3 | ScalarsiteEtherIpAddr | read-write | current | ip address for ethernet access to the site (switch) |
| 1.3.6.1.4.1.1751.2.18.1.4 | ScalarsiteEtherIpMask | read-write | current | ip mask for ethernet access to the site (switch) |
| 1.3.6.1.4.1.1751.2.18.1.5 | ScalarsiteGatewayAddr | read-write | current | ip address for gateway access to the site (switch) |
| 1.3.6.1.4.1.1751.2.18.1.6 | ScalarsiteAtmAddrPrefix1 | read-write | current | This is one of the two atm address prefix of this switch. |
| 1.3.6.1.4.1.1751.2.18.1.7 | ScalarsiteAtmAddrUser1 | read-write | current | This is one of the two atm address user part of this switch. |
| 1.3.6.1.4.1.1751.2.18.1.8 | ScalarsiteRemoteMgrAddr1 | read-write | current | remote manager IP Address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.9 | ScalarsiteRemoteMgrAddr2 | read-write | current | remote manager IP Address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.10 | ScalarsiteRemoteMgrAddr3 | read-write | current | remote manager IP Address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.11 | ScalarsiteRemoteMgrAddr4 | read-write | current | remote manager IP Address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.12 | ScalarsiteRemoteMgrAddr5 | read-write | current | remote manager IP Address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.13 | ScalarsiteMasterNodeAtmAddr1 | read-write | current | Master node atm address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.14 | ScalarsiteMasterNodeAtmAddr2 | read-write | current | Master node atm address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.15 | ScalarsiteEnhanceFeatures | read-only | current | enhancement features capability - number consists of a sum to represent the following: 1: securedAtm 2: isdn 4: frameRelay |
| 1.3.6.1.4.1.1751.2.18.1.16 | ScalarsiteTrapDialOutFeature | read-write | current | Enables the dialing out to a remote terminal or beeper for trap notification. |
| 1.3.6.1.4.1.1751.2.18.1.17 | ScalarsiteTrapDialOutPhoneNum | read-write | current | Phone number of the terminal to dial when trap notifications are phoned out |
| 1.3.6.1.4.1.1751.2.18.1.18 | ScalarsiteTrapDialOutBeeperData | read-write | current | Data (phone digits) to send to beeper if the dialBeeper option is selected. |
| 1.3.6.1.4.1.1751.2.18.1.19 | ScalarsiteDateAndTime | read-write | current | Current date and time: 11 octets octet# contents range 1-2 year 0..65536 3 month 1..12 4 day 1..31 5 hour 0..23 6 minutes 0..59 7 seconds 0..60(60=leap second)… |
| 1.3.6.1.4.1.1751.2.18.1.20 | ScalarsiteSoftwareVersion | read-only | current | Constant value representing the version number of the current software. |
| 1.3.6.1.4.1.1751.2.18.1.21 | ScalarcsTcpServerIpAddress | read-write | current | The IP address of CS |
| 1.3.6.1.4.1.1751.2.18.1.22 | ScalarcsTcpServerPortNumber | read-write | current | The Port Number used for communication with CS. NOTE: Port # 5000 and 6000 have been reservered for AC products. DO NOT USED THEM !!! |
| 1.3.6.1.4.1.1751.2.18.1.23 | ScalarkeepAliveTimer | read-write | current | keep alive timer can be set inbetween 0 and 999999999 |
| 1.3.6.1.4.1.1751.2.18.1.24 | ScalarinactiveTimer | read-write | current | inactive timer can be set inbetween 0 and 999999999 |
| 1.3.6.1.4.1.1751.2.18.1.25 | ScalarsiteMasterNodeAddrType1 | read-write | current | Type of address specified for master node atm address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.26 | ScalarsiteMasterNodeAddrType2 | read-write | current | Type of address specified for master node atm address, where TRAP will be sent to. |
| 1.3.6.1.4.1.1751.2.18.1.27 | ScalarinBandPrimaryIpAddress | read-write | current | IP address of the switch when the switch is accessed over the primary in-band connection. |
| 1.3.6.1.4.1.1751.2.18.1.28 | ScalarinBandPrimaryIpMask | read-write | current | IP address subnet mask of the primary in-band management IP address. |
| 1.3.6.1.4.1.1751.2.18.1.29 | ScalarinBandBackupIpAddress | read-only | current | IP address of the switch when the switch is accessed over the secondary in-band connection. |
| 1.3.6.1.4.1.1751.2.18.1.30 | ScalarinBandBackupIpMask | read-only | current | IP address subnet mask of the secondary in-band management IP address. |
| 1.3.6.1.4.1.1751.2.18.1.31 | ScalarinBandSvcConnectionsAllowed | read-write | current | Flag indicating whether in-band management should be supported over SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.32 | ScalaratmArpServer | read-write | current | This flag indicates if this switch is an ATM ARP server. |
| 1.3.6.1.4.1.1751.2.18.1.33 | ScalaratmArpServerRemoteConnectionType | read-write | current | When this switch is not the ATM ARP server, indicates whether the connection to the ATM ARP server uses SVCs or PVCs. |
| 1.3.6.1.4.1.1751.2.18.1.34 | ScalaratmArpServerRemoteAtmAddress | read-write | current | The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.35 | ScalaratmArpServerRemoteAddrType | read-write | current | The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.36 | ScalaratmArpServerRemoteIpAddress | read-write | current | The IP address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs. |
| 1.3.6.1.4.1.1751.2.18.1.37 | ScalaratmArpServerRemoteIpMask | read-write | current | The IP address subnet mask of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs. |
| 1.3.6.1.4.1.1751.2.18.1.38 | ScalaratmArpServerEncapsulation | read-only | current | The type of encapsulation used for IP packets over ATM in in-band management. |
| 1.3.6.1.4.1.1751.2.18.1.41 | ScalarsiteFallbackSoftwareVersion | read-only | current | Constant value representing the version number of the software to fallback to. |
| 1.3.6.1.4.1.1751.2.18.1.42 | ScalarsiteUpgradeSoftwareVersion | read-only | current | Constant value representing the version number of the software to upgrade to. |
| 1.3.6.1.4.1.1751.2.18.1.43 | ScalarsiteSwitchIpAddr | read-write | current | IP Address for communication with the switch, regardless of which cpu is primary. |
| 1.3.6.1.4.1.1751.2.18.1.44 | ScalarmuxTcpType | read-write | current | The type of mux TCP. |
| 1.3.6.1.4.1.1751.2.18.1.45 | ScalarloopbackLocationID | read-write | current | ID of the ATM Node where the loopback is to occur. |
| 1.3.6.1.4.1.1751.2.18.1.46 | ScalaroamDebouncingPeriod | read-write | current | Debouncing period in milli seconds for clearing AIS/RDI state. |
| 1.3.6.1.4.1.1751.2.18.1.47 | ScalarsvcPointToPointCalls | read-write | current | The total number of SVC point-to-point calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.48 | ScalarsvcPointToMultiPointCalls | read-write | current | The total number of SVC point-to-multipoint calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.49 | ScalarsvcPointToMultiPointParties | read-write | current | The total number of parties on SVC point-to-multipoint calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.50 | ScalarspvcCePointToPointCalls | read-write | current | The total number of circuit emulation SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.51 | ScalarspvcTePointToPointCalls | read-write | current | The total number of terminal emulation SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.52 | ScalarspvcAtmPointToPointCalls | read-write | current | The total number of ATM SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.53 | ScalarcgApiCirEmCirEmPvcCalls | read-write | current | The total number of circuit emulation to circuit emulation calls for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.54 | ScalarcgApiCirEmAtmPvcCalls | read-write | current | The total number of circuit emulation to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.55 | ScalarcgApiAtmAtmPvcCalls | read-write | current | The total number of ATM to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.56 | ScalarcgApiPointToPointSvcCalls | read-write | current | The total number of point-to-point SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.57 | ScalarcgApiPointToMultiPointSvcCalls | read-write | current | The total number of point-to-multipoint SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.58 | ScalarcgApiPointToMultiPointParties | read-write | current | The total number of parties for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.59 | ScalarcallContrlResAllocApply | read-write | current | 0 - not apply, 1 - apply the call control resouce allocation modification |
| 1.3.6.1.4.1.1751.2.18.1.60 | ScalarcallContrlResAllocUsage | read-only | current | The percentage of memory usage for call control resource. |
| 1.3.6.1.4.1.1751.2.18.1.61 | ScalarsiteFirmwarePatchNumber | read-only | current | Constant value representing the patch number of the patch release. |
| 1.3.6.1.4.1.1751.2.18.1.62 | ScalarspvcActRestartAll | read-write | current | Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections |
| 1.3.6.1.4.1.1751.2.18.1.63 | ScalarcgSvcCutThroughOption | read-write | current | Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough (2) - CG sends explcit PATH_… |
| 1.3.6.1.4.1.1751.2.18.1.64 | ScalarsgApiCirEmEndPoints | read-write | current | The total number of circuit emulation endpoints for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.65 | ScalarsgApiAtmSvcEndPoints | read-write | current | The total number of ATM SVC endpoints for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.66 | ScalarsiteRemoteMgrSrcAddr1 | read-write | current | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.67 | ScalarsiteRemoteMgrSrcAddr2 | read-write | current | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.68 | ScalarsiteRemoteMgrSrcAddr3 | read-write | current | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.69 | ScalarsiteRemoteMgrSrcAddr4 | read-write | current | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.70 | ScalarsiteRemoteMgrSrcAddr5 | read-write | current | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.71 | ScalarspvcFrPointToPointCalls | read-write | current | The total number of FR SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.72 | ScalarinBandAppAtmAddress | read-write | current | The ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.73 | ScalarinBandAppAtmAddrType | read-write | current | The format of the ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.74 | ScalaratmArpServer2RemoteAtmAddress | read-write | current | The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.75 | ScalaratmArpServer2RemoteAddrType | read-write | current | The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.76 | ScalartasmMaxAnnceDiskSpace | read-write | current | Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk. |
| 1.3.6.1.4.1.1751.2.18.1.77 | ScalartasmMaxAnnce | read-write | current | Specifies the maximum number of tones and announcements that can be played simultaneously. This will depend on the number of control blocks allocated for colle… |
| 1.3.6.1.4.1.1751.2.18.1.78 | ScalartasmMaxStdTones | read-write | current | Specifies the maximum number of tones that can be played simutaneously. This field has been obsoleted for optimisation of resources. |
| 1.3.6.1.4.1.1751.2.18.1.79 | ScalartasmMemoryAction | read-write | current | Specifies the action to be performed on the memory in the TASM card used for storing announcements. |
| 1.3.6.1.4.1.1751.2.18.1.80 | TabletasAnnceTable | not-accessible | current | Table of announcements for the Tone Announcement server . |
| 1.3.6.1.4.1.1751.2.18.1.80.1 | RowtasAnnceEntry | not-accessible | current | Row definition for Tone Announcement server table announcement entries. |
| 1.3.6.1.4.1.1751.2.18.1.80.1.1 | ColumntasAnnceId | not-accessible | current | Announcement ID. |
| 1.3.6.1.4.1.1751.2.18.1.80.1.2 | ColumntasAnnceType | read-only | current | The type of this announcement: voice indicates it is a pure voice announcement file. toneVoice indicates it is a file with tones at the beginning followed by v… |
| 1.3.6.1.4.1.1751.2.18.1.80.1.3 | ColumntasAnnceCmprsType | read-only | current | The type of compression used for storing this announcement: compress8k indicates 8k compression algorithm should be used. compress16k indicates 16k compression… |
| 1.3.6.1.4.1.1751.2.18.1.80.1.4 | ColumntasAnnceValid | read-only | current | Indicates the condition of this announcement, whether it is good, it is stored using an older compression algorithm, or it is corrupted. |
| 1.3.6.1.4.1.1751.2.18.1.80.1.5 | ColumntasAnnceDescription | read-only | current | Description for this announcement. |
| 1.3.6.1.4.1.1751.2.18.1.81 | TabletasToneConfigTable | not-accessible | current | Table of standard physical tone attributes |
| 1.3.6.1.4.1.1751.2.18.1.81.1 | RowtasToneConfigEntry | not-accessible | current | Row definition for TASM announcement entries. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.1 | ColumntasToneId | not-accessible | current | Tone ID. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.2 | ColumntasToneType | read-write | current | The type of this standard tone. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.3 | ColumntasToneFirstFreq | read-write | current | The first frequency value for this tone. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.4 | ColumntasToneSecondFreq | read-write | current | The second frequency value for this tone. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.5 | ColumntasToneThirdFreq | read-write | current | The third frequency value for this tone. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.6 | ColumntasToneOnTime | read-write | current | The on time in the tone duty cycle. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.7 | ColumntasToneOffTime | read-write | current | The off time in the tone duty cycle. |
| 1.3.6.1.4.1.1751.2.18.1.81.1.8 | ColumntasToneLevel | read-write | current | The level of this tone in dBm. |
| 1.3.6.1.4.1.1751.2.18.1.82 | ScalaratmArpServerAtmAddr | read-write | current | The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server . |
| 1.3.6.1.4.1.1751.2.18.1.83 | ScalaratmArpServerAddrType | read-write | current | The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server. |
| 1.3.6.1.4.1.1751.2.18.1.84 | ScalarspvcPointToMultiPointCalls | read-write | current | The total number of SPVC point-to-multipoint calls |
| 1.3.6.1.4.1.1751.2.18.1.85 | ScalarspvcPointToMultiPointParties | read-write | current | The total number of parties on SPVC point-to-multipoint calls. |
| 1.3.6.1.4.1.1751.2.18.1.86 | ScalarconsoleIPAddr1 | read-write | current | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.87 | ScalarconsoleIPAddr2 | read-write | current | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.88 | ScalarconsoleIPAddr3 | read-write | current | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.89 | ScalarconsolePort1 | read-write | current | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.90 | ScalarconsolePort2 | read-write | current | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.91 | ScalarconsolePort3 | read-write | current | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.92 | TablefeatureTable | not-accessible | current | Table of features to be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.92.1 | RowfeatureEntry | not-accessible | current | Row definition for feature table |
| 1.3.6.1.4.1.1751.2.18.1.92.1.1 | ColumnfeatureId | not-accessible | current | feature ID. |
| 1.3.6.1.4.1.1751.2.18.1.92.1.2 | ColumnfeatureStaticMem | read-only | current | Minimum memory required to run this feature |
| 1.3.6.1.4.1.1751.2.18.1.92.1.3 | ColumnfeatureDesiredStatus | read-write | current | To enable / disable this feature |
| 1.3.6.1.4.1.1751.2.18.1.92.1.4 | ColumnfeatureCurrentStatus | read-only | current | This feature is enabled / disabled |
| 1.3.6.1.4.1.1751.2.18.1.93 | ScalarmediaGatewayControlType | read-write | current | Choose to use H.248 protocol or sapphire protocol |
| 1.3.6.1.4.1.1751.2.18.1.94 | TabledspResourceTable | not-accessible | current | Table of DSP resource usage for the whole system. |
| 1.3.6.1.4.1.1751.2.18.1.94.1 | RowdspResourceEntry | not-accessible | current | Row definition for DSP resource usage table entries. |
| 1.3.6.1.4.1.1751.2.18.1.94.1.1 | ColumndspResourceId | not-accessible | current | DSP resource type enumerations. The algoSets describe the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. Aal mode… |
| 1.3.6.1.4.1.1751.2.18.1.94.1.2 | ColumndspResourceAvail | read-only | current | The available DSP resource counts how many connections can be made using this available DSP resource type in the system. |
| 1.3.6.1.4.1.1751.2.18.1.94.1.3 | ColumndspResourceUsed | read-only | current | The used DSP resource counts how many connections are already made using this available DSP resource type in the system. |
| 1.3.6.1.4.1.1751.2.18.1.94.1.4 | ColumndspResourceUsedFailed | read-only | current | The used but failed DSP resource counts how many connections are already made using currently failed DSP resource type in the system. |
| 1.3.6.1.4.1.1751.2.18.1.94.1.5 | ColumndspResourceAvailFailed | read-only | current | The available but failed DSP resource counts how many connections can be made if using currently failed DSP resource type in the system. |
| 1.3.6.1.4.1.1751.2.18.1.95 | ScalartasmMaxDigitControlBlocks | read-write | current | Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing t… |
| 1.3.6.1.4.1.1751.2.18.1.96 | ScalartasmMaxTestControlBlocks | read-write | current | Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing ton… |
| 1.3.6.1.4.1.1751.2.18.1.97 | ScalartasmMaxMemResvd | read-only | current | Specifies the maximum amount of memory in megabytes reserved for TASM. |
| 1.3.6.1.4.1.1751.2.18.1.98 | ScalartasmControlBlockResAllocUsage | read-only | current | The percentage of memory usage for tones, announcements, digit collection and line tests control blocks. |
| 1.3.6.1.4.1.1751.2.18.1.99 | ScalartasmAnnceCacheMemResAllocUsage | read-only | current | The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be updated to reflect the cache mem… |
| 1.3.6.1.4.1.1751.2.18.1.100 | ScalarsiteAlternateGatewayAddr | read-write | current | Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabled on InBand PVCs |
| 1.3.6.1.4.1.1751.2.18.1.101 | NodeipThrottlingConfig | |||
| 1.3.6.1.4.1.1751.2.18.1.101.1 | ScalaripThrottlingFeatureStatus | read-write | current | CPU card IP throttling feature: off/on |
| 1.3.6.1.4.1.1751.2.18.1.101.2 | ScalaripThrottlingAllowedInFrameRate | read-write | current | CPU card IP throttling: allowed input frames per second |
| 1.3.6.1.4.1.1751.2.18.1.101.3 | ScalaripThrottlingLeakyBucketSize | read-write | current | CPU card IP throttling: the size of leaky bucket |
| 1.3.6.1.4.1.1751.2.18.1.101.4 | ScalaripThrottlingStatsOdometerTimer | read-only | current | CPU card IP throttling: Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.1.101.5 | ScalaripThrottlingStatsOdometerReset | read-write | current | CPU card IP throttling: Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.1.101.6 | ScalaripThrottlingInPackets | read-only | current | CPU card IP throttling: the total number of input packets from both Ethernet port and In-band-mgmt of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.7 | ScalaripThrottlingInPacketsPassedEi | read-only | current | CPU card IP throttling: the number of input packets passed through the Ethernet port of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.8 | ScalaripThrottlingInPacketsDroppedEi | read-only | current | CPU card IP throttling: the number of input packets dropped from the Ethernet port of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.9 | ScalaripThrottlingInPacketsPassedIBM | read-only | current | CPU card IP throttling: the number of input packets passed from the In-Band-Management of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.10 | ScalaripThrottlingInPacketsDroppedIBM | read-only | current | CPU card IP throttling: the number of input packets dropped from the In-Band-Management of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.102 | ScalarcsSapphireInterfaceAddress | read-write | current | The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server and PSAX running as client. |
| 1.3.6.1.4.1.1751.2.18.1.103 | TabletrapActivationTable | not-accessible | current | Table of traps be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.103.1 | RowtrapActivationEntry | not-accessible | current | Row definition for trapActivation table |
| 1.3.6.1.4.1.1751.2.18.1.103.1.1 | ColumntrapGroupId | not-accessible | current | trap group ID. |
| 1.3.6.1.4.1.1751.2.18.1.103.1.2 | ColumntrapIndex | not-accessible | current | trap index in each group. |
| 1.3.6.1.4.1.1751.2.18.1.103.1.3 | ColumntrapActivationStatus | read-write | current | activated: trap message activated. deactivated: trap message deactivated. permanently-activated: trap message can not be deactivated. |
| 1.3.6.1.4.1.1751.2.18.1.103.1.4 | ColumntrapNames | read-only | current | Name of the trap |
| 1.3.6.1.4.1.1751.2.18.1.103.1.5 | ColumnresetAction | read-write | current | set-all-active: set all trap active one group. set-all-deactive: set all trap deactive in a group. |
| 1.3.6.1.4.1.1751.2.18.1.104 | ScalarspvcGlobalPriorityScheme | read-write | current | Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.105 | ScalarspvcPriorityScheme | read-write | current | Flag indicating whether priority scheme should be supported in SPVCs. |
| 1.3.6.1.4.1.1751.2.18.1.106 | ScalarspvcTrunkingPriorityScheme | read-write | current | Flag indicating whether priority scheme should be supported in SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.107 | ScalaratmTrunkVccs | read-write | current | The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs). |
| 1.3.6.1.4.1.1751.2.18.1.108 | ScalaratmTrunkNarrowBandCalls | read-write | current | The total number of ATM Trunking Narrow Band Calls supported |
| 1.3.6.1.4.1.1751.2.18.1.109 | NodedspResourceFeatureConfig | |||
| 1.3.6.1.4.1.1751.2.18.1.109.1 | ScalardspReroutingFeature | read-write | current | Dsp2 Rerouting Feature.This is used to enable or disable rerouting of connections when a dsp chip or card fails. |
| 1.3.6.1.4.1.1751.2.18.2 | NodeequipConfig | |||
| 1.3.6.1.4.1.1751.2.18.2.1 | TablecardTable | not-accessible | current | Table of card configuration data |
| 1.3.6.1.4.1.1751.2.18.2.1.1 | RowcardEntry | not-accessible | current | Row definition for ac120 card |
| 1.3.6.1.4.1.1751.2.18.2.1.1.1 | ColumncardSlot | not-accessible | current | Physical slot location. Valid range is a number between 1 and 24. |
| 1.3.6.1.4.1.1751.2.18.2.1.1.2 | ColumncardType | read-only | current | Type of card in a physical slot. A specific type of card is associated with each number. none(1) no board present taxi(2) Taxi oC-3c(3) OC3 dS3-ATM(4) DS3 ATM … |
| 1.3.6.1.4.1.1751.2.18.2.1.1.3 | ColumncardProtectionStatus | read-only | current | Current protection status of the card: none if the card is un-protected; protected if it is under the protection of another card; wrongType if the card types o… |
| 1.3.6.1.4.1.1751.2.18.2.1.1.4 | ColumncardOperStatus | read-only | current | Current operational status of the card. For I/O card, it is primary if configured, it is unknown if unconfigured, or removed. For CPU, it is primary if the CPU… |
| 1.3.6.1.4.1.1751.2.18.2.1.1.5 | ColumncardAdminStatus | read-write | current | administrative status |
| 1.3.6.1.4.1.1751.2.18.2.1.1.6 | ColumncardAlarmStatus | read-only | current | last alarm occurred |
| 1.3.6.1.4.1.1751.2.18.2.1.1.7 | ColumncardCleiCode | read-only | current | CLEI code |
| 1.3.6.1.4.1.1751.2.18.2.1.1.8 | ColumncardRevision | read-only | current | Card Revision number |
| 1.3.6.1.4.1.1751.2.18.2.1.1.9 | ColumncardSerialNumber | read-only | current | Serial Number |
| 1.3.6.1.4.1.1751.2.18.2.1.1.10 | ColumncardOperatingMode | read-write | current | Mode of operation for a card. This is applicable to those card types which can be configured in a dual mode. e.g. unstDS3E3-3P can be operational as either a 3… |
| 1.3.6.1.4.1.1751.2.18.2.1.1.11 | ColumnprotectionConfigMode | read-write | current | Protection Configuration Mode of a Card unprotected: Card is not in protection or protected state protection: Card is in protection state working: Card is in p… |
| 1.3.6.1.4.1.1751.2.18.2.1.1.12 | ColumnprotectionStatus | read-only | current | Protection Status of a card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carry… |
| 1.3.6.1.4.1.1751.2.18.2.1.1.13 | ColumnprotectionSlot | read-only | current | If Protection Config Mode is Working then this field gives the protection slot. |
| 1.3.6.1.4.1.1751.2.18.2.2 | TabletaxiPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.2.1 | RowtaxiPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.2.1.1 | ColumntaxiPortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.2.1.2 | ColumntaxiPortType | read-write | current | taxi type |
| 1.3.6.1.4.1.1751.2.18.2.2.1.3 | ColumntaxiLineStatus | read-only | current | taxi line status: 1: NoAlarm 2: Loss of Signal |
| 1.3.6.1.4.1.1751.2.18.2.2.1.4 | ColumntaxiOutputTransferRate | read-write | current | User selectable parameter which allows the outgoing rate of the port to be reduced to 50% taxi, halfRate, only on AQueMan. |
| 1.3.6.1.4.1.1751.2.18.2.3 | Tableds3PortConfigTable | not-accessible | current | Table of ds3 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.3.1 | Rowds3PortConfigEntry | not-accessible | current | Row definition for ds3 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.3.1.1 | Columnds3PortId | not-accessible | current | slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.3.1.2 | Columnds3LineType | read-write | current | This variable indicates the variety of DS3 C-bit implementing this interface. The type of interface affects the interpretation of the usage and error statistic… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.3 | Columnds3LineCoding | read-only | current | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS refers to t… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.4 | Columnds3LoopbackConfig | read-write | current | This variable represents the loopback configuration of the DS3 interface. See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.3.1.5 | Columnds3TransmitClockSource | read-write | current | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local cloc… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.6 | Columnds3LineStatus | read-only | current | ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remot… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.7 | Columnds3LineBuildOut | read-write | current | ds3 line build out |
| 1.3.6.1.4.1.1751.2.18.2.3.1.8 | Columnds3LineScramble | read-write | current | ds3 line scramble |
| 1.3.6.1.4.1.1751.2.18.2.3.1.9 | Columnds3CellMapping | read-write | current | ds3 cell mapping method |
| 1.3.6.1.4.1.1751.2.18.2.3.1.10 | Columnds3SendCode | read-write | current | This variable indicates what type of code is being sent across the ds3 interface by the device. The values mean: 'noCode' - sending looped or normal data 'line… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.11 | Columnds3OutputTxRate | read-write | current | The ability to adjust the bandwidth of DS3 in tx direction. The adjustable DS3 bandwidth will support 1% increments. |
| 1.3.6.1.4.1.1751.2.18.2.4 | TablemsPortConfigTable | not-accessible | current | Table of multi-serial card's port attributes |
| 1.3.6.1.4.1.1751.2.18.2.4.1 | RowmsPortConfigEntry | not-accessible | current | Row definition for multi-serial port attributes |
| 1.3.6.1.4.1.1751.2.18.2.4.1.1 | ColumnmsPortId | not-accessible | current | slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.4.1.2 | ColumnmsLineCoding | read-only | current | Line Coding. |
| 1.3.6.1.4.1.1751.2.18.2.4.1.3 | ColumnmsBaudRate | read-write | current | baud rate is determined by multiplying this number by the msBaudRateMultiplier |
| 1.3.6.1.4.1.1751.2.18.2.4.1.4 | ColumnmsProtocol | read-write | current | protocol type for serial port |
| 1.3.6.1.4.1.1751.2.18.2.4.1.5 | ColumnmsEquipmentType | read-write | current | Equipment type |
| 1.3.6.1.4.1.1751.2.18.2.4.1.6 | ColumnmsRs232XmitMode | read-write | current | transmit mode for rs232 DTE/DCE serial port |
| 1.3.6.1.4.1.1751.2.18.2.4.1.7 | ColumnmsRs232Parity | read-write | current | parity for rs232 DTE/DCE serial port |
| 1.3.6.1.4.1.1751.2.18.2.4.1.8 | ColumnmsRs232DataBits | read-write | current | data bits for rs232 DTE/DCE serial port |
| 1.3.6.1.4.1.1751.2.18.2.4.1.9 | ColumnmsRs232StopBits | read-write | current | stop bits for rs232 DTE/DCE serial port |
| 1.3.6.1.4.1.1751.2.18.2.4.1.10 | ColumnmsTxDataClkSrcForDte | read-write | current | Transmit data clock source for DTE, externalTx in is not valid for rs232. This field is ignored if the local side is DCE. |
| 1.3.6.1.4.1.1751.2.18.2.4.1.11 | ColumnmsTxDataClkSrcForDce | read-write | current | Transmit data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if … |
| 1.3.6.1.4.1.1751.2.18.2.4.1.12 | ColumnmsRxDataClkSrcForDce | read-write | current | Receive data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if t… |
| 1.3.6.1.4.1.1751.2.18.2.4.1.13 | ColumnmsRxClkPolarity | read-write | current | Whether or not to reverse the receive clock |
| 1.3.6.1.4.1.1751.2.18.2.4.1.14 | ColumnmsTxClkPolarity | read-write | current | Whether or not to reverse the transmit clock |
| 1.3.6.1.4.1.1751.2.18.2.4.1.15 | ColumnmsKgResync | read-write | current | Turn KG resync on/off |
| 1.3.6.1.4.1.1751.2.18.2.4.1.16 | ColumnmsHandshake | read-write | current | Multiserial Module handshake: observed : used with AAL1 to monitor RTS/CTS exchange. |
| 1.3.6.1.4.1.1751.2.18.2.4.1.17 | ColumnmsSpeedAdaption | read-write | current | The state of allowing speed adaption |
| 1.3.6.1.4.1.1751.2.18.2.4.1.18 | ColumnmsBitStuffing | read-write | current | When msBitStuffing is enabled, CAC throughput is (1 + 1/7) user throughtput. Otherwise the CAC throughput is the same as the user throughput. msBitStuffing can… |
| 1.3.6.1.4.1.1751.2.18.2.4.1.19 | ColumnmsLineStatus | read-only | current | line status on the port: The msLineStatus is a bit map representation. It can represent multiple failures (alarms) if supported by the card. NoAlarm should be … |
| 1.3.6.1.4.1.1751.2.18.2.4.1.20 | ColumnmsRxDataPolarity | read-write | current | Whether or not to reverse the receive data |
| 1.3.6.1.4.1.1751.2.18.2.4.1.21 | ColumnmsTxDataPolarity | read-write | current | Whether or not to reverse the transmit data |
| 1.3.6.1.4.1.1751.2.18.2.4.1.22 | ColumnmsLoopbackConfig | read-write | current | This variable represents the loopback configuration of the Serial port. |
| 1.3.6.1.4.1.1751.2.18.2.4.1.23 | ColumnmsLOSDetection | read-write | current | State of detection of LOS by IO card. LOS detection is always enabled when msBitStuffing is enabled. When the interface is not circuit emulation, the IO card d… |
| 1.3.6.1.4.1.1751.2.18.2.5 | Tableds1PortConfigTable | not-accessible | current | Table of ds1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.5.1 | Rowds1PortConfigEntry | not-accessible | current | Row definition for ds1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.5.1.1 | Columnds1PortId | not-accessible | current | interface index - slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.5.1.2 | Columnds1Channelization | read-write | current | ds1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.5.1.3 | Columnds1LineType | read-write | current | ds1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.5.1.4 | Columnds1LineCoding | read-write | current | ds1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.5.1.5 | Columnds1LoopbackConfig | read-write | current | This variable represents the loopback configuration of the ds1 interface |
| 1.3.6.1.4.1.1751.2.18.2.5.1.6 | Columnds1TransmitClockSource | read-write | current | ds1 timing source |
| 1.3.6.1.4.1.1751.2.18.2.5.1.7 | Columnds1LineBuildOut | read-write | current | ds1 line build out |
| 1.3.6.1.4.1.1751.2.18.2.5.1.8 | Columnds1LineStatus | read-only | current | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1Line… |
| 1.3.6.1.4.1.1751.2.18.2.5.1.10 | Columnds1EnhanceFeatureSet1 | read-write | current | To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under this scheme. |
| 1.3.6.1.4.1.1751.2.18.2.5.1.11 | Columnds1DataTransferType | read-write | current | DS1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer… |
| 1.3.6.1.4.1.1751.2.18.2.5.1.12 | Columnds1OamInterworkingType | read-write | current | Specifies whether the interworking is done by trunk conditioning or unframed1s |
| 1.3.6.1.4.1.1751.2.18.2.5.1.14 | Columnds1ConnGatewayFeature | read-write | current | To enable/disable connection gateway (Sapphire) API. |
| 1.3.6.1.4.1.1751.2.18.2.5.1.15 | Columnds1InLineCode | read-write | current | To select and support the inlinecode option in either ANSI or DS1_ANI (ANI: Access Network Interface) |
| 1.3.6.1.4.1.1751.2.18.2.6 | Tableoc3PortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.6.1 | Rowoc3PortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.6.1.1 | Columnoc3PortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.6.1.2 | Columnoc3LoopbackConfig | read-write | current | This variable represents the loopback configuration of the OC3 interface See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.6.1.3 | Columnoc3TransmitClockSource | read-write | current | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local cloc… |
| 1.3.6.1.4.1.1751.2.18.2.6.1.4 | Columnoc3LineStatus | read-only | current | oc3 line status - 1: oc3NoAlarm: No alarm present 2: oc3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: oc3XmitRAIAlarm: Transmitting Yellow/Remote … |
| 1.3.6.1.4.1.1751.2.18.2.6.1.5 | Columnoc3OutputTransferRate | read-write | current | User selectable parameter which allows the outgoing rate of the port to be reduced to 50% oc3, halfRate, only on AQueMan. |
| 1.3.6.1.4.1.1751.2.18.2.6.1.6 | Columnoc3APSConfiguration | read-write | current | Indicates whether APS is configured for this port . |
| 1.3.6.1.4.1.1751.2.18.2.7 | TabletwoWireSourcePortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.7.1 | RowtwoWireSourcePortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.7.1.1 | ColumntwoWireSourcePortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.7.1.2 | ColumntwoWireSourceLoopDetection | read-only | current | This field selects terminal equipment loop circuit detection mode. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.3 | ColumntwoWireSourceDialMode | read-only | current | This field configures twoWireSource card to support communication terminal equipment. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.4 | ColumntwoWireSourceLoopBackConfig | read-only | current | Configuration of 2W Source LoopBack. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.5 | ColumntwoWireSourceLineStatus | read-only | current | twoWireSource line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure |
| 1.3.6.1.4.1.1751.2.18.2.7.1.6 | ColumntwoWireSourceSignalingBits | read-only | current | This field selects the signaling bits as seen in DS1 signal, ab or abcd. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.7 | ColumntwoWireSourceRingCadence | read-only | current | This field selects ring On/Off pattern. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.8 | ColumntwoWireSourceSignalingState | read-only | current | This field reflects the current signaling state. |
| 1.3.6.1.4.1.1751.2.18.2.7.1.9 | ColumntwoWireSourceTestMode | read-write | current | This field selects line test mode. For normal operation, this field should be OFF. |
| 1.3.6.1.4.1.1751.2.18.2.8 | TablehighSpeedPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.8.1 | RowhighSpeedPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.8.1.1 | ColumnhighSpeedPortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.8.1.2 | ColumnhighSpeedPortInputRate | read-write | current | Port input rate |
| 1.3.6.1.4.1.1751.2.18.2.8.1.3 | ColumnhighSpeedPortOutputRate | read-write | current | Port output rate |
| 1.3.6.1.4.1.1751.2.18.2.9 | TabledspPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.9.1 | RowdspPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.9.1.1 | ColumndspPortId | read-only | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.10 | TabletwoWireSinkPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.10.1 | RowtwoWireSinkPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.10.1.1 | ColumntwoWireSinkPortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.10.1.2 | ColumntwoWireSinkLoopDetection | read-only | current | Types of loop detection. |
| 1.3.6.1.4.1.1751.2.18.2.10.1.3 | ColumntwoWireSinkDialMode | read-only | current | This field selects subscribed dial mode. |
| 1.3.6.1.4.1.1751.2.18.2.10.1.4 | ColumntwoWireSinkLineStatus | read-only | current | twoWireSink line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure |
| 1.3.6.1.4.1.1751.2.18.2.10.1.5 | ColumntwoWireSinkSignalingBits | read-only | current | This field selects the signaling bits as seen in DS1 signal, ab or abcd. |
| 1.3.6.1.4.1.1751.2.18.2.10.1.6 | ColumntwoWireSinkSignalingState | read-only | current | This field reflects the current signaling state. |
| 1.3.6.1.4.1.1751.2.18.2.10.1.7 | ColumntwoWireSinkTestMode | read-write | current | This field selects line test mode. For normal operation, this field should be OFF. |
| 1.3.6.1.4.1.1751.2.18.2.11 | Tablee3PortConfigTable | not-accessible | current | Table of e3 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.11.1 | Rowe3PortConfigEntry | not-accessible | current | Row definition for e3 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.11.1.1 | Columne3PortId | not-accessible | current | slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.11.1.2 | Columne3LineType | read-write | current | This variable indicates the basic frame structure supported in this E3 port. The rate of E3 is 34.368 Mbps. TITLE: SPECIFICATION: G.832 ITU-T G.832 1993. G.751… |
| 1.3.6.1.4.1.1751.2.18.2.11.1.3 | Columne3LineCoding | read-only | current | The line code supported for the E3 port. The High Density Bipolar of order 3 (hdb3) as specified in section 8.1 of ITU-T G.703. |
| 1.3.6.1.4.1.1751.2.18.2.11.1.4 | Columne3LoopbackConfig | read-write | current | This variable represents the loopback configuration of the E3 interface. See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.11.1.5 | Columne3TransmitClockSource | read-write | current | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local cloc… |
| 1.3.6.1.4.1.1751.2.18.2.11.1.6 | Columne3LineStatus | read-only | current | e3 line status: 1: e3NoAlarm: No alarm present 2: e3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: e3XmitRAIAlarm: Transmitting Yellow/Remote Alarm… |
| 1.3.6.1.4.1.1751.2.18.2.11.1.7 | Columne3LineBuildOut | read-only | current | e3 line build out |
| 1.3.6.1.4.1.1751.2.18.2.11.1.8 | Columne3LineScramble | read-write | current | e3 line scramble |
| 1.3.6.1.4.1.1751.2.18.2.11.1.9 | Columne3CellMapping | read-write | current | e3 cell mapping method |
| 1.3.6.1.4.1.1751.2.18.2.12 | Tablee1PortConfigTable | not-accessible | current | Table of e1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.12.1 | Rowe1PortConfigEntry | not-accessible | current | Row definition for e1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.12.1.1 | Columne1PortId | not-accessible | current | interface index - slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.12.1.2 | Columne1Channelization | read-write | current | e1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.12.1.3 | Columne1LineType | read-only | current | E1 interface type. The rate of E1 is 2.048 Mbps |
| 1.3.6.1.4.1.1751.2.18.2.12.1.4 | Columne1LineCoding | read-only | current | e1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.12.1.5 | Columne1LoopbackConfig | read-write | current | This variable represents the loopback configuration of the e1 interface See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.12.1.6 | Columne1TransmitClockSource | read-write | current | e1 timing source |
| 1.3.6.1.4.1.1751.2.18.2.12.1.7 | Columne1LineNationalBits | read-write | current | e1 line country specific code |
| 1.3.6.1.4.1.1751.2.18.2.12.1.8 | Columne1LineStatus | read-only | current | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineSt… |
| 1.3.6.1.4.1.1751.2.18.2.12.1.10 | Columne1TS16 | read-write | current | Time slot 16 is configurable for channel associated signaling (CAS) or data. cas: 'ABCD' signaling will be extracted in time slot 16 if channel is configured f… |
| 1.3.6.1.4.1.1751.2.18.2.12.1.11 | Columne1DataTransferType | read-write | current | E1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer,… |
| 1.3.6.1.4.1.1751.2.18.2.12.1.12 | Columne1CRC4 | read-write | current | Enable or disable transmission of CRC4 bits on bit 1 of each frame. |
| 1.3.6.1.4.1.1751.2.18.2.12.1.13 | Columne1OamInterworkingType | read-write | current | Specifies whether the interworking is done by trunk conditioning or unframed1s |
| 1.3.6.1.4.1.1751.2.18.2.12.1.14 | Columne1EnhanceFeatureSet1 | read-write | current | To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under the scheme. |
| 1.3.6.1.4.1.1751.2.18.2.12.1.15 | Columne1ConnGatewayFeature | read-write | current | To enable/disable connection gateway (Sapphire) API. |
| 1.3.6.1.4.1.1751.2.18.2.13 | TableethernetPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.13.1 | RowethernetPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.13.1.1 | ColumnethernetPortId | not-accessible | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.13.1.2 | ColumnethernetLinkType | read-write | current | The type of port can either be set to 10baseT or 100baseT for the first port on the ethernet card. The other ports can only be set to 10baseT. The Auto mode wi… |
| 1.3.6.1.4.1.1751.2.18.2.13.1.3 | ColumnethernetPhysicalAddr | read-write | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1751.2.18.2.13.1.4 | ColumnethernetLineStatus | read-only | current | ethernet line status: 1: Down 2: 10baseT-FullDuplex 4: 10baseT-HalfDuplex 8: 100baseT-FullDuplex 16: 100baseT-HalfDuplex |
| 1.3.6.1.4.1.1751.2.18.2.13.1.5 | ColumnethernetDuplexMode | read-write | current | Set the port to either be in full or half duplex. You can also set the port to auto detect the mode it is connected to. |
| 1.3.6.1.4.1.1751.2.18.2.14 | Tabledsp2PortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.14.1 | Rowdsp2PortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.14.1.1 | Columndsp2PortId | read-only | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.15 | TableimaPortConfigTable | not-accessible | current | Table used for the IMA virtual port on cards that have physical interfaces configured as atmIma. Corresponds to port 7 on DS1 and E1. |
| 1.3.6.1.4.1.1751.2.18.2.15.1 | RowimaPortConfigEntry | not-accessible | current | Row definition for ima specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.15.1.1 | ColumnimaPortId | read-only | current | interface index - slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.16 | Nodeoc3APS | |||
| 1.3.6.1.4.1.1751.2.18.2.16.1 | Tableoc3APSPairConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1 | Rowoc3APSPairConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.1 | Columnoc3APSPairId | not-accessible | current | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.2 | Columnoc3APSPairMode | read-write | current | Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote a… |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.3 | Columnoc3APSPairOption | read-only | current | Nonrevertive - After a switch to Prot port, even if the working comes up there is no switch to the working port back. Revertive - traffic is switched back to w… |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.4 | Columnoc3APSPairWorkingSFBERThreshold | read-write | current | Bits error Rate threshold to declare signal failure |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.5 | Columnoc3APSPairWorkingSDBERThreshold | read-write | current | Bits error Rate threshold to declare signal degrade |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.6 | Columnoc3APSPairProtectionSFBERThreshold | read-write | current | Bits error Rate threshold to declare signal failure |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.7 | Columnoc3APSPairProtectionSDBERThreshold | read-write | current | Bits error Rate threshold to declare signal degrade |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.8 | Columnoc3APSPairWTRPeriod | read-write | current | Duration for Wait To Restore Period between 5 to 12 minutes. Ref: BellCore GR-253-Core, Issue 3, page 200, R5-56. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.9 | Columnoc3APSWorkingSlot | read-only | current | Working slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.10 | Columnoc3APSProtectionSlot | read-only | current | Protection slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.11 | Columnoc3APSActiveSlot | read-only | current | Active slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.12 | Columnoc3APSPairStatus | read-only | current | noFailure : The protection line is not in use. modeMismatch : one end is configured unidirectional and the other is bidirectional (both the ends should be conf… |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.13 | Columnoc3APSPairUserCommand | read-write | current | APS Pair User Command |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.14 | Columnoc3APSPairCurrentState | read-only | current | Current State of the APS state machine |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.15 | Columnoc3APSPairWorkingLineSignalStatus | read-only | current | Signal Status of the working port (LOS / LOF / LCD / AIS etc.) |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.16 | Columnoc3APSPairProtectionLineSignalStatus | read-only | current | Signal Status of the protection port (LOS / LOF / LCD / AIS etc.) |
| 1.3.6.1.4.1.1751.2.18.2.17 | Tablests1PortConfigTable | not-accessible | current | Table of sts-1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.17.1 | Rowsts1PortConfigEntry | not-accessible | current | Row definition for sts-1 specific port attributes |
| 1.3.6.1.4.1.1751.2.18.2.17.1.1 | Columnsts1PortId | not-accessible | current | slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.17.1.2 | Columnsts1LineCoding | read-only | current | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. B3ZS refers to the … |
| 1.3.6.1.4.1.1751.2.18.2.17.1.3 | Columnsts1LoopbackConfig | read-write | current | This variable represents the loopback configuration of the sts-1 interface. See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.17.1.4 | Columnsts1TransmitClockSource | read-write | current | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local cloc… |
| 1.3.6.1.4.1.1751.2.18.2.17.1.5 | Columnsts1LineBuildOut | read-write | current | sts-1 line build out |
| 1.3.6.1.4.1.1751.2.18.2.17.1.6 | Columnsts1LineStatus | read-only | current | sts-1 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Rem… |
| 1.3.6.1.4.1.1751.2.18.2.17.1.7 | Columnsts1StsPointers | read-write | current | status of the sts-1 sts pointers |
| 1.3.6.1.4.1.1751.2.18.2.17.1.8 | Columnsts1VtPointers | read-write | current | status of the sts-1 vt pointers |
| 1.3.6.1.4.1.1751.2.18.2.18 | TabletasmPortConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.2.18.1 | RowtasmPortConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.2.18.1.1 | ColumntasmPortId | read-only | current | interface index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.19 | TableprotectionGroupConfigTable | not-accessible | current | This table gives the list of Slot Protection Groups in the System. Slot protection group in one in which there are n cards being protected by 1 standby card. |
| 1.3.6.1.4.1.1751.2.18.2.19.1 | RowprotectionGroupConfigEntry | not-accessible | current | Row Definition for the Protection Group Tables |
| 1.3.6.1.4.1.1751.2.18.2.19.1.1 | ColumnprotectionSlotId | not-accessible | current | Protection Group Index. Index is the slot id of the Slot Configured as Protection. |
| 1.3.6.1.4.1.1751.2.18.2.19.1.2 | ColumnworkingSlotBitmap | read-write | current | Working Slot Bitmap which the protection slot will monitor |
| 1.3.6.1.4.1.1751.2.18.2.19.1.3 | ColumnprotectionCommand | read-write | current | List of commands which can be executed on a protection Group. Clear : This command is used to clear any previous commands which may have been and get back to n… |
| 1.3.6.1.4.1.1751.2.18.2.19.1.4 | ColumnprotectionCommandSlotId | read-write | current | This is the working Slot to which command has to be applied |
| 1.3.6.1.4.1.1751.2.18.2.19.1.5 | ColumnprotectionGroupStatus | read-only | current | Protection Status of a Protection Card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if … |
| 1.3.6.1.4.1.1751.2.18.2.19.1.6 | ColumnworkingSlotId | read-only | current | If protection group status is active, this field will give the slot which is being working. In case it is in standby mode this field will show 0 |
| 1.3.6.1.4.1.1751.2.18.2.19.1.7 | ColumnworkingFailedBitmap | read-only | current | Gives Bitmap of the Failed Working Slots. Subset of the Working Slot Bitmap. |
| 1.3.6.1.4.1.1751.2.18.2.19.1.8 | ColumnprotectionActiveCounter | read-only | current | Give the Number of Times a Protection has gone to active. |
| 1.3.6.1.4.1.1751.2.18.2.19.1.9 | ColumnprotectionOOSCounter | read-only | current | Give the Number of Times a Protection Card has failed. |
| 1.3.6.1.4.1.1751.2.18.3 | NodechannelConfig | |||
| 1.3.6.1.4.1.1751.2.18.3.1 | TabletaxiChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.1.1 | RowtaxiChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.1.1.1 | ColumntaxiChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.1.1.2 | ColumntaxiChannelIfType | read-write | current | UNI or NNI type |
| 1.3.6.1.4.1.1751.2.18.3.1.1.3 | ColumntaxiChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.2 | Tableds3ChannelConfigTable | not-accessible | current | Table of common physical channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.2.1 | Rowds3ChannelConfigEntry | not-accessible | current | Row definition for common physical channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.2.1.1 | Columnds3ChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.2.1.2 | Columnds3ChannelIfType | read-write | current | UNI or NNI type, |
| 1.3.6.1.4.1.1751.2.18.3.2.1.3 | Columnds3ChannelSecuFeature | read-write | current | Interface type configured on DS3 channel |
| 1.3.6.1.4.1.1751.2.18.3.3 | Tableds1ChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.3.1 | Rowds1ChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.3.1.1 | Columnds1ChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.3.1.2 | Columnds1ChannelIfType | read-write | current | UNI or NNI type for ATM ,Frame Relay, or ISDN service interface type for channel |
| 1.3.6.1.4.1.1751.2.18.3.3.1.3 | Columnds1ChannelDs0Map | read-write | current | bit map of DS0 in channel |
| 1.3.6.1.4.1.1751.2.18.3.3.1.4 | Columnds1ChannelCellMapping | read-write | current | cell delineation mode for ATM cell bearing services |
| 1.3.6.1.4.1.1751.2.18.3.3.1.5 | Columnds1ChannelInputCodingRule | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.3.1.6 | Columnds1ChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.3.1.7 | Columnds1ChannelSignaling | read-write | current | refers to robbed-bit signaling in circuitEmulation interfaces. |
| 1.3.6.1.4.1.1751.2.18.3.3.1.8 | Columnds1ChannelCellScramble | read-write | current | refers to enabling/disabling cell scrambling on ATM interface. |
| 1.3.6.1.4.1.1751.2.18.3.4 | TablemsChannelConfigTable | not-accessible | current | Channel configuration table for multi-serial ports. |
| 1.3.6.1.4.1.1751.2.18.3.4.1 | RowmsChannelConfigEntry | not-accessible | current | Row definition for multi-serial channel config. |
| 1.3.6.1.4.1.1751.2.18.3.4.1.1 | ColumnmsChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.4.1.2 | ColumnmsChannelIfType | read-write | current | interface type for multi-serial port |
| 1.3.6.1.4.1.1751.2.18.3.4.1.3 | ColumnmsChannelCellBearingMode | read-write | current | The cell delineation mode is either LANET or CCITT based |
| 1.3.6.1.4.1.1751.2.18.3.4.1.4 | ColumnmsChannelCellBearingAddrMode | read-write | current | standard - ATM Forum UNI 3.0/3.1 noiseTolerant - A proprietary noise tolerant address mapping scheme |
| 1.3.6.1.4.1.1751.2.18.3.4.1.5 | ColumnmsChannelCellBearingPayloadFec | read-only | current | payload error correction scheme |
| 1.3.6.1.4.1.1751.2.18.3.4.1.6 | ColumnmsChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.5 | Tableoc3ChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.5.1 | Rowoc3ChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.5.1.1 | Columnoc3ChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.5.1.2 | Columnoc3ChannelIfType | read-write | current | UNI or NNI type |
| 1.3.6.1.4.1.1751.2.18.3.5.1.3 | Columnoc3ChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.6 | TabletwoWireSourceChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.6.1 | RowtwoWireSourceChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.6.1.1 | ColumntwoWireSourceChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.6.1.2 | ColumntwoWireSourceChannelIfType | read-write | current | Interface types of 2W station(source) channel. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.3 | ColumntwoWireSourceChannelConnectionType | read-write | current | This field selects ATM virtual circuit connection type, PVC or SVC. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.4 | ColumntwoWireSourceChannelCompandingLaw | read-only | current | This field selects channel encoding/decoding quantization interval, muLaw or aLaw. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.5 | ColumntwoWireSourceChannelSecuFeature | read-only | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.6.1.6 | ColumntwoWireSourceChannelVoiceCompression | read-only | current | voice compression scheme |
| 1.3.6.1.4.1.1751.2.18.3.6.1.7 | ColumntwoWireSourceChannelEchoCancellation | read-only | current | This field disables/enables twoWireSource card echo cancellation function. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.8 | ColumntwoWireSourceChannelSilenceSupression | read-only | current | This field disables/enables twoWireSource card silence suppression. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.9 | ColumntwoWireSourceChannelEncapsulationAal | read-only | current | This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. |
| 1.3.6.1.4.1.1751.2.18.3.6.1.10 | ColumntwoWireSourceChannelSubscriberService | read-write | current | This field selects subscribed channel service types. plar - Private Line Automatic Ring fxs - Foreign Exchange Subscriber End s-signaling - A proprietary speci… |
| 1.3.6.1.4.1.1751.2.18.3.7 | TablehighSpeedChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.7.1 | RowhighSpeedChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.7.1.1 | ColumnhighSpeedChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.7.1.2 | ColumnhighSpeedChannelIfType | read-write | current | UNI or NNI type |
| 1.3.6.1.4.1.1751.2.18.3.8 | TabledspChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.8.1 | RowdspChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.8.1.1 | ColumndspChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.8.1.2 | ColumndspChannelIfType | read-write | current | Channel Interface Type |
| 1.3.6.1.4.1.1751.2.18.3.8.1.3 | ColumndspChannelInputCodingRule | read-only | current | Input Coding Rule |
| 1.3.6.1.4.1.1751.2.18.3.8.1.4 | ColumndspChannelVoiceCompression | read-write | current | voice compression scheme |
| 1.3.6.1.4.1.1751.2.18.3.8.1.5 | ColumndspChannelEchoCancellation | read-only | current | voice compression scheme |
| 1.3.6.1.4.1.1751.2.18.3.8.1.6 | ColumndspChannelSilenceSupression | read-only | current | voice compression scheme |
| 1.3.6.1.4.1.1751.2.18.3.9 | TabletwoWireSinkChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.9.1 | RowtwoWireSinkChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.9.1.1 | ColumntwoWireSinkChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.9.1.2 | ColumntwoWireSinkChannelIfType | read-write | current | Interface types. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.3 | ColumntwoWireSinkChannelConnectionType | read-only | current | This field selects ATM virtual circuit connection type, PVC or SVC. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.4 | ColumntwoWireSinkChannelCompandingLaw | read-only | current | This field selects channel encoding/decoding quantization interval, muLaw or aLaw. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.5 | ColumntwoWireSinkChannelVoiceCompression | read-only | current | voice compression scheme |
| 1.3.6.1.4.1.1751.2.18.3.9.1.6 | ColumntwoWireSinkChannelEchoCancellation | read-only | current | This field disables/enables twoWireSink card echo cancellation function. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.7 | ColumntwoWireSinkChannelSilenceSupression | read-only | current | This field disables/enables twoWireSink card silence suppression. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.8 | ColumntwoWireSinkChannelEncapsulationAal | read-only | current | This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. |
| 1.3.6.1.4.1.1751.2.18.3.9.1.9 | ColumntwoWireSinkChannelSubscriberService | read-only | current | The only available service type for twoWireSink card is Foreign Exchange Office End (fxo). |
| 1.3.6.1.4.1.1751.2.18.3.10 | Tablee3ChannelConfigTable | not-accessible | current | Table of common physical channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.10.1 | Rowe3ChannelConfigEntry | not-accessible | current | Row definition for common physical channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.10.1.1 | Columne3ChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.10.1.2 | Columne3ChannelIfType | read-write | current | Interface type configured on E3 channel |
| 1.3.6.1.4.1.1751.2.18.3.10.1.3 | Columne3ChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.11 | Tablee1ChannelConfigTable | not-accessible | current | Table of common physical Port attributes |
| 1.3.6.1.4.1.1751.2.18.3.11.1 | Rowe1ChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.11.1.1 | Columne1ChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.11.1.2 | Columne1ChannelIfType | read-write | current | UNI or NNI type for ATM ,Frame Relay, or ISDN serviceinterface type for channel |
| 1.3.6.1.4.1.1751.2.18.3.11.1.3 | Columne1ChannelDs0Map | read-write | current | bit map of DS0 in channel |
| 1.3.6.1.4.1.1751.2.18.3.11.1.4 | Columne1ChannelCellMapping | read-write | current | cell delineation mode for ATM cell bearing services |
| 1.3.6.1.4.1.1751.2.18.3.11.1.5 | Columne1ChannelInputCodingRule | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.11.1.6 | Columne1ChannelSecuFeature | read-write | current | enhancement feature |
| 1.3.6.1.4.1.1751.2.18.3.11.1.7 | Columne1ChannelSignaling | read-write | current | Refers to robbed-bit singaling in circuitEmulation interface. |
| 1.3.6.1.4.1.1751.2.18.3.12 | TableethernetChannelConfigTable | not-accessible | current | Table used for enthernet channel configuration. |
| 1.3.6.1.4.1.1751.2.18.3.12.1 | RowethernetChannelConfigEntry | not-accessible | current | Row definition for enthernet channel attributes. |
| 1.3.6.1.4.1.1751.2.18.3.12.1.1 | ColumnethernetChannelId | not-accessible | current | Interface index |
| 1.3.6.1.4.1.1751.2.18.3.12.1.2 | ColumnethernetChannelIfType | read-write | current | Types of ethernet interface. There are two types of bridging interface(channel):bridge and routing. |
| 1.3.6.1.4.1.1751.2.18.3.13 | Nodedsp2Channel | |||
| 1.3.6.1.4.1.1751.2.18.3.13.1 | Tabledsp2ChannelConfigTable | not-accessible | current | Table of Channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.13.1.1 | Rowdsp2ChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.13.1.1.1 | Columndsp2ChannelId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.13.1.1.2 | Columndsp2ChannelIfType | read-write | current | Channel Interface Type |
| 1.3.6.1.4.1.1751.2.18.3.13.1.1.3 | Columndsp2ChannelAlarmType | read-only | current | This field is a read only failure which gives the status of a dsp.When the status is dspFailure the Operational Status at the interface level will go OOS |
| 1.3.6.1.4.1.1751.2.18.3.13.1.1.4 | Columndsp2ChannelModeConfig | read-write | current | This field is used to configure the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. The complete list of enumerati… |
| 1.3.6.1.4.1.1751.2.18.3.13.2 | Tabledsp2AlgorithmTable | not-accessible | current | Table of dsp2 algorithms assigned to interface. |
| 1.3.6.1.4.1.1751.2.18.3.13.2.1 | Rowdsp2AlgorithmEntry | not-accessible | current | Row definition for dsp2 algorithms assigned to interfaces. |
| 1.3.6.1.4.1.1751.2.18.3.13.2.1.1 | Columndsp2AlgorithmId | not-accessible | current | interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.13.2.1.2 | Columndsp2AlgorithmType | read-only | current | DSP Algorithm type. |
| 1.3.6.1.4.1.1751.2.18.3.14 | TableimaGrpChannelConfigTable | not-accessible | current | Table used for the IMA virtual channel (group) configuration on cards that have physical interfaces configured as atmIma. Represents three channels that can be… |
| 1.3.6.1.4.1.1751.2.18.3.14.1 | RowimaGrpChannelConfigEntry | not-accessible | current | Row definition for common physical port attributes |
| 1.3.6.1.4.1.1751.2.18.3.14.1.1 | ColumnimaGrpChannelId | not-accessible | current | interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.3.14.1.2 | ColumnimaGrpChannelIfType | read-write | current | interface type |
| 1.3.6.1.4.1.1751.2.18.3.14.1.3 | ColumnimaGrpChannelPortMap | read-write | current | A bitmap that identifies the physical IMA interfaces in this group. The least significant bit represents port 1. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.4 | ColumnimaGrpChannelNeState | read-only | current | The current operational state of the near-end IMA Group State Machine. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.5 | ColumnimaGrpChannelFeState | read-only | current | The current operational state of the far-end IMA Group State Machine. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.6 | ColumnimaGrpChannelFailureStatus | read-only | current | The current failure status of the IMA group (the reason why the GTSM is in the down state). noFailure(1) no failure startUpNe(2) near-end is in the state of st… |
| 1.3.6.1.4.1.1751.2.18.3.14.1.7 | ColumnimaGrpChannelSymmetry | read-only | current | Symmetry of the IMA group. Symmetric configuration: all ports of IMA group are configured as full-duplex. With symmetric configuration, operation is symmetric … |
| 1.3.6.1.4.1.1751.2.18.3.14.1.8 | ColumnimaGrpChannelMinNumTxLinks | read-write | current | Minimum number of transmit links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.9 | ColumnimaGrpChannelMinNumRxLinks | read-write | current | Minimum number of receive links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.10 | ColumnimaGrpChannelNeTxClkMode | read-write | current | Transmit clocking mode used by the near-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). … |
| 1.3.6.1.4.1.1751.2.18.3.14.1.11 | ColumnimaGrpChannelFeTxClkMode | read-only | current | Transmit clocking mode used by the far-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). T… |
| 1.3.6.1.4.1.1751.2.18.3.14.1.12 | ColumnimaGrpChannelTxImaId | read-write | current | The IMA ID currently in use by the near-end IMA function. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.13 | ColumnimaGrpChannelRxImaId | read-only | current | The IMA ID currently in use by the far-end IMA function. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.14 | ColumnimaGrpChannelTxFrameLength | read-write | current | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.15 | ColumnimaGrpChannelRxFrameLength | read-only | current | Value of IMA frame length as received from remote IMA function. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.16 | ColumnimaGrpChannelDiffLinkDelayMax | read-write | current | The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.17 | ColumnimaGrpChannelLeastDelayLink | read-only | current | The Interface Index of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has b… |
| 1.3.6.1.4.1.1751.2.18.3.14.1.18 | ColumnimaGrpChannelDiffDelayMaxObs | read-only | current | The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive li… |
| 1.3.6.1.4.1.1751.2.18.3.14.1.19 | ColumnimaGrpChannelAlphaValue | read-write | current | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.20 | ColumnimaGrpChannelBetaValue | read-write | current | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.21 | ColumnimaGrpChannelGammaValue | read-write | current | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC … |
| 1.3.6.1.4.1.1751.2.18.3.14.1.22 | ColumnimaGrpChannelStatsNeNumFailures | read-only | current | The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.23 | ColumnimaGrpChannelStatsFeNumFailures | read-only | current | The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.24 | ColumnimaGrpChannelStatsNumTxActLnks | read-only | current | The number of links which are configured to transmit and are currently Active in this IMA group. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.25 | ColumnimaGrpChannelStatsNumRxActLnks | read-only | current | The number of links which are configured to receive and are currently Active in this IMA group. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.26 | ColumnimaGrpChannelStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.3.14.1.27 | ColumnimaGrpChannelCompatMode | read-write | current | This is used to indicate interoperability mode to the I/O card in terms of reporting the link status at the correct location in the IMA Control Protocol (ICP) … |
| 1.3.6.1.4.1.1751.2.18.3.15 | TabletasmChannelConfigTable | not-accessible | current | Table of common physical Channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.15.1 | RowtasmChannelConfigEntry | not-accessible | current | Row definition for common physical channel attributes |
| 1.3.6.1.4.1.1751.2.18.3.15.1.1 | ColumntasmChannelId | not-accessible | current | Interface index - SSPPCC |
| 1.3.6.1.4.1.1751.2.18.3.15.1.2 | ColumntasmChannelIfType | read-write | current | Channel Interface Type |
| 1.3.6.1.4.1.1751.2.18.3.15.1.3 | ColumntasmChannelAlarmType | read-only | current | This field is a read only failure which gives the status of a DSP in the TASM card.When the status is tasmFailure the Operational Status at the interface level… |
| 1.3.6.1.4.1.1751.2.18.3.15.1.4 | ColumntasmChannelModeConfig | read-write | current | This field is used to configure the mdoe in which a TASM DSP will be used asd a resource. The modes are explained as follows: casMode: DSP resource is used for… |
| 1.3.6.1.4.1.1751.2.18.5 | NodeintfConfig | |||
| 1.3.6.1.4.1.1751.2.18.5.1 | TableatmUniConfigTable | not-accessible | current | Table of atm user to network interface (UNI) |
| 1.3.6.1.4.1.1751.2.18.5.1.1 | RowatmUniConfigEntry | not-accessible | current | Row definition of atm UNI |
| 1.3.6.1.4.1.1751.2.18.5.1.1.1 | ColumnatmUniIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.1.1.2 | ColumnatmUniAddrType | read-write | current | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.1.1.3 | ColumnatmUniSvcMinVpi | read-write | current | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.4 | ColumnatmUniSvcMaxVpi | read-write | current | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.5 | ColumnatmUniSvcMinVci | read-write | current | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.6 | ColumnatmUniSvcMaxVci | read-write | current | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.7 | ColumnatmUniAdminStatus | read-write | current | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.8 | ColumnatmUniOperStatus | read-only | current | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.1.1.9 | ColumnatmUniNwPrefix1 | read-write | current | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.1.1.10 | ColumnatmUniOverSubscription | read-write | current | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.1.1.11 | ColumnatmUniT303 | read-write | current | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.12 | ColumnatmUniT308 | read-write | current | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.13 | ColumnatmUniT309 | read-write | current | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.14 | ColumnatmUniT310 | read-write | current | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.15 | ColumnatmUniT313 | read-write | current | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.16 | ColumnatmUniT316 | read-write | current | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.17 | ColumnatmUniT317 | read-write | current | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.18 | ColumnatmUniT322 | read-write | current | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.19 | ColumnatmUniT398 | read-write | current | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.20 | ColumnatmUniT399 | read-write | current | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.21 | ColumnatmUniMyNeighborIpAddress | read-write | current | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.22 | ColumnatmUniMyNeighborIfName | read-write | current | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is mana… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.23 | ColumnatmUniVpiSig | read-write | current | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.24 | ColumnatmUniVciSig | read-write | current | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.25 | ColumnatmUniVpiIlmi | read-write | current | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.26 | ColumnatmUniVciIlmi | read-write | current | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.27 | ColumnatmUniAtmSignalingStatus | read-write | current | Indicates if atm signaling is enabled or disabled for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.29 | ColumnatmUniMyIfName | read-write | current | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identic… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.30 | ColumnatmUniIlmiProtocolStatus | read-write | current | The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.31 | ColumnatmUniIlmiOperStatus | read-only | current | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.32 | ColumnatmUniIlmiConfigProc | read-write | current | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.33 | ColumnatmUniIlmiConnectProc | read-write | current | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.34 | ColumnatmUniIlmiAttachPtProc | read-write | current | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.35 | ColumnatmUniIlmiSecureLinkProc | read-write | current | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.36 | ColumnatmUniIlmiAddrRegProc | read-write | current | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.37 | ColumnatmUniIlmiTimerS | read-write | current | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.38 | ColumnatmUniIlmiTimerT | read-write | current | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.39 | ColumnatmUniIlmiRetryK | read-write | current | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.40 | ColumnatmUniIntfType | read-write | current | atm interface type |
| 1.3.6.1.4.1.1751.2.18.5.1.1.41 | ColumnatmUniUserAddress | read-write | current | ATM User Address |
| 1.3.6.1.4.1.1751.2.18.5.1.1.42 | ColumnatmUniViSuppFlag | read-write | current | virtual interface supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.43 | ColumnatmUniUPCSupp | read-write | current | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.44 | ColumnatmUniUbrLoadBalSupp | read-write | current | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.45 | ColumnatmUniAvailBwIgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for |
| 1.3.6.1.4.1.1751.2.18.5.1.1.46 | ColumnatmUniAvailBwEgr | read-only | current | The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for |
| 1.3.6.1.4.1.1751.2.18.5.1.1.47 | ColumnatmUniVUNISuppFlag | read-write | current | virtual UNI interface supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.48 | ColumnatmUniUserAddrOrgScope | read-write | current | ATM User Address Organizational scope |
| 1.3.6.1.4.1.1751.2.18.5.1.1.49 | ColumnatmUniSscopRxWndSz | read-write | current | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.1.1.50 | ColumnatmUniConnTrafficShapingFlag | read-write | current | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shapi… |
| 1.3.6.1.4.1.1751.2.18.5.2 | TableatmIispConfigTable | not-accessible | current | Table of atm iisp interface |
| 1.3.6.1.4.1.1751.2.18.5.2.1 | RowatmIispConfigEntry | not-accessible | current | Row definition of atm iisp interface |
| 1.3.6.1.4.1.1751.2.18.5.2.1.1 | ColumnatmIispIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.2.1.2 | ColumnatmIispSvcMinVpi | read-write | current | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.3 | ColumnatmIispSvcMaxVpi | read-write | current | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.4 | ColumnatmIispSvcMinVci | read-write | current | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.5 | ColumnatmIispSvcMaxVci | read-write | current | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.6 | ColumnatmIispAdminStatus | read-write | current | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.7 | ColumnatmIispOperStatus | read-only | current | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.2.1.8 | ColumnatmIispOverSubscription | read-write | current | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.2.1.9 | ColumnatmIispT303 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.10 | ColumnatmIispT308 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.11 | ColumnatmIispT309 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.12 | ColumnatmIispT310 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.13 | ColumnatmIispT316 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.14 | ColumnatmIispT317 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.15 | ColumnatmIispT322 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.16 | ColumnatmIispT398 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.17 | ColumnatmIispT399 | read-write | current | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.18 | ColumnatmIispAtmSignalingStatus | read-write | current | Indicates if atm signaling is enabled or disabled for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.19 | ColumnatmIispAvailBwIgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.20 | ColumnatmIispAvailBwEgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.21 | ColumnatmIispUPCSupp | read-write | current | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.2.1.22 | ColumnatmIispUbrLoadBalSupp | read-write | current | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.2.1.23 | ColumnatmIispSscopRxWndSz | read-write | current | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.2.1.24 | ColumnatmIispConnTrafficShapingFlag | read-write | current | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shapi… |
| 1.3.6.1.4.1.1751.2.18.5.3 | TableatmCirEmConfigTable | not-accessible | current | Table for ATM Circuit Emulation Interface |
| 1.3.6.1.4.1.1751.2.18.5.3.1 | RowatmCirEmConfigEntry | not-accessible | current | Row definition for ATM Circuit Emulation interface |
| 1.3.6.1.4.1.1751.2.18.5.3.1.1 | ColumnatmCirEmIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.3.1.2 | ColumnatmCirEmAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.3.1.3 | ColumnatmCirEmOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.3.1.4 | ColumnatmCirEmCASIdleAbcdPattern | read-write | current | abcd bit pattern for cirEm AIS |
| 1.3.6.1.4.1.1751.2.18.5.3.1.5 | ColumnatmCirEmCASBusyAbcdPattern | read-write | current | abcd bit pattern for cirEm RDI |
| 1.3.6.1.4.1.1751.2.18.5.3.1.6 | ColumnatmCirEmAlarmDataPattern | read-write | current | data pattern for cirEm AIS |
| 1.3.6.1.4.1.1751.2.18.5.3.1.7 | ColumnatmCirEmTCPattern | read-write | current | Should abcd bits be toggled after 2.5 Secs. |
| 1.3.6.1.4.1.1751.2.18.5.3.1.8 | ColumnatmCirEmDownStInterworking | read-write | current | This field will be used to select the type of interworking to be done in the down stream direction. |
| 1.3.6.1.4.1.1751.2.18.5.4 | TableatmTermEmConfigTable | not-accessible | current | Table for ATM Terminal Emulation Interface |
| 1.3.6.1.4.1.1751.2.18.5.4.1 | RowatmTermEmConfigEntry | not-accessible | current | Row definition for ATM Terminal Emulation interface |
| 1.3.6.1.4.1.1751.2.18.5.4.1.1 | ColumnatmTermEmIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.4.1.2 | ColumnatmTermEmRxTimeOut | read-write | current | receive timeout value in tenths of seconds. |
| 1.3.6.1.4.1.1751.2.18.5.4.1.3 | ColumnatmTermEmAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.4.1.4 | ColumnatmTermEmOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.5 | TablehdlcConfigTable | not-accessible | current | Table for an HDLC Pass Through Interface |
| 1.3.6.1.4.1.1751.2.18.5.5.1 | RowhdlcConfigEntry | not-accessible | current | Row definition for an HDLC Pass Through interface |
| 1.3.6.1.4.1.1751.2.18.5.5.1.1 | ColumnhdlcIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.5.1.2 | ColumnhdlcAdminStatus | read-write | current | The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure t… |
| 1.3.6.1.4.1.1751.2.18.5.5.1.3 | ColumnhdlcOperStatus | read-only | current | The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.5.1.4 | ColumnhdlcThroughPut | read-write | current | The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb |
| 1.3.6.1.4.1.1751.2.18.5.5.1.5 | ColumnhdlcDataInversion | read-write | current | Flag indicating whether data inversion is performed by the IO card for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.6 | TablefrUniConfigTable | not-accessible | current | Table for Frame Realy UNI Interface |
| 1.3.6.1.4.1.1751.2.18.5.6.1 | RowfrUniConfigEntry | not-accessible | current | Row definition for Frame Relay interface |
| 1.3.6.1.4.1.1751.2.18.5.6.1.1 | ColumnfrUniIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.6.1.2 | ColumnfrUniAddrDlciLen | read-only | current | Length of Data Link connection identify of frame relay UNI address |
| 1.3.6.1.4.1.1751.2.18.5.6.1.3 | ColumnfrUniDlcmiState | read-write | current | The state of Data Link Connection Management Indentify of frame relay UNI. |
| 1.3.6.1.4.1.1751.2.18.5.6.1.4 | ColumnfrUniAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.6.1.5 | ColumnfrUniOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.6.1.6 | ColumnfrUniOverSubscription | read-write | current | Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet,… |
| 1.3.6.1.4.1.1751.2.18.5.6.1.7 | ColumnfrUniLmiProtocol | read-write | current | Lmi protocol to run |
| 1.3.6.1.4.1.1751.2.18.5.6.1.8 | ColumnfrUniInterworkingType | read-write | current | frf5 - fr/atm network interworking frf8 - fr/atm service interworking |
| 1.3.6.1.4.1.1751.2.18.5.6.1.9 | ColumnfrUniN391 | read-write | current | full status polling counter. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.10 | ColumnfrUniN392 | read-write | current | error threshold. DTE:Mandatory, DCE:Mandatory |
| 1.3.6.1.4.1.1751.2.18.5.6.1.11 | ColumnfrUniN393 | read-write | current | Monitored event count. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.12 | ColumnfrUniT391 | read-write | current | Link integrity verification timer. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.13 | ColumnfrUniT392 | read-write | current | Polling verification timer. DTE:N/A, DCE:Mandatory |
| 1.3.6.1.4.1.1751.2.18.5.6.1.14 | ColumnfrUniAsyncLmi | read-write | current | Async PVC status messages |
| 1.3.6.1.4.1.1751.2.18.5.6.1.15 | ColumnfrLmiOperStatus | read-only | current | The operational status of the lmi protocol: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.6.1.16 | ColumnfrUniNT3 | read-write | current | Message frequency timer relevant for ATT LMI only. |
| 1.3.6.1.4.1.1751.2.18.5.6.1.17 | ColumnfrUniThroughPut | read-write | current | The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb |
| 1.3.6.1.4.1.1751.2.18.5.7 | TabledspConfigTable | not-accessible | current | Table for Dsp Interface |
| 1.3.6.1.4.1.1751.2.18.5.7.1 | RowdspConfigEntry | not-accessible | current | Row definition for Dsp interface |
| 1.3.6.1.4.1.1751.2.18.5.7.1.1 | ColumndspIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.7.1.2 | ColumndspAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.7.1.3 | ColumndspOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.8 | TablebridgeConfigTable | not-accessible | current | Table which hold Config Entries for all bridges. |
| 1.3.6.1.4.1.1751.2.18.5.8.1 | RowbridgeConfigEntry | not-accessible | current | Row definition for bridge entries |
| 1.3.6.1.4.1.1751.2.18.5.8.1.1 | ColumnbridgeIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.8.1.2 | ColumnbridgeAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.8.1.3 | ColumnbridgeOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.8.1.4 | ColumnbridgeNumber | read-write | current | The number of bridges |
| 1.3.6.1.4.1.1751.2.18.5.8.1.5 | ColumnbridgePortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.1751.2.18.5.8.1.6 | ColumnbridgePathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802-1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.1751.2.18.5.8.1.7 | ColumnbridgeConnectionType | read-write | current | Connection types |
| 1.3.6.1.4.1.1751.2.18.5.9 | TablebridgeDomainTable | not-accessible | current | A table which holds the bridgeDomainEntry data |
| 1.3.6.1.4.1.1751.2.18.5.9.1 | RowbridgeDomainEntry | not-accessible | current | A table entry for a Bridge Domain on an ethernet card |
| 1.3.6.1.4.1.1751.2.18.5.9.1.1 | ColumnbridgeDomainNumber | not-accessible | current | The bridge number of the bridge which this interface is a part of. If the interface is currently not associated with any bridge this will be set to none. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.2 | ColumnbridgeDomainAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service |
| 1.3.6.1.4.1.1751.2.18.5.9.1.3 | ColumnbridgeDomainOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.9.1.4 | ColumnbridgeDomainPriority | read-write | current | The value of the writeable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.5 | ColumnbridgeDomainTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detedted by the bridge entity. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.6 | ColumnbridgeDomainDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.7 | ColumnbridgeDomainRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.8 | ColumnbridgeDomainRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.9 | ColumnbridgeDomainMaxMessageAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.1751.2.18.5.9.1.10 | ColumnbridgeDomainHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.1751.2.18.5.9.1.11 | ColumnbridgeDomainHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.12 | ColumnbridgeDomainForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its state. The value determines how long the port stays in each … |
| 1.3.6.1.4.1.1751.2.18.5.9.1.13 | ColumnbridgeDomainMaxBridgeAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.1751.2.18.5.9.1.14 | ColumnbridgeDomainBridgeHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.15 | ColumnbridgeDomainBridgeForwardDelay | read-write | current | The value that all bridges user for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is r… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.16 | ColumnbridgeDomainAgingTime | read-write | current | The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.17 | ColumnbridgeDomainSpanningTree | read-write | current | Allows the bridge to be configured to run without the spanning tree algorithm. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.18 | ColumnbridgeDomainTopologyChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.1751.2.18.5.9.1.19 | ColumnbridgeDomainLearnedEntryDiscards | read-only | current | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.4.1.1751.2.18.5.9.1.20 | ColumnbridgeDomainTimer | read-only | current | Number of seconds elapsed since the last reset of bridge group statistics |
| 1.3.6.1.4.1.1751.2.18.5.9.1.21 | ColumnbridgeDomainDefaultGateway | read-write | current | The default gateway for this bridge domain. This is now an obsolete entry |
| 1.3.6.1.4.1.1751.2.18.5.9.1.22 | ColumnbridgeDomainPortStatusBitmap | read-only | current | A bit map describing which ports in a bridge group are up or down |
| 1.3.6.1.4.1.1751.2.18.5.10 | TablerouterConfigTable | not-accessible | current | Table which hold Config Entries for all routers (VPNs) |
| 1.3.6.1.4.1.1751.2.18.5.10.1 | RowrouterConfigEntry | not-accessible | current | config data for a router (VPN) |
| 1.3.6.1.4.1.1751.2.18.5.10.1.1 | ColumnrouterIfIndex | not-accessible | current | A scalar number which identifies an IP interface within a given router (VPN) |
| 1.3.6.1.4.1.1751.2.18.5.10.1.2 | ColumnrouterAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.10.1.3 | ColumnrouterOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.10.1.4 | ColumnrouterIpAddress | read-write | current | router ATM IP Address. |
| 1.3.6.1.4.1.1751.2.18.5.10.1.5 | ColumnrouterIpNetworkMask | read-write | current | An IP network mask for an IP interface within a given router (VPN) |
| 1.3.6.1.4.1.1751.2.18.5.10.1.6 | ColumnrouterNumber | read-write | current | A scalar number which identifies a given router (VPN) |
| 1.3.6.1.4.1.1751.2.18.5.10.1.7 | ColumnrouterEthernetIpAddress | read-write | current | router Ethernet IP Address. |
| 1.3.6.1.4.1.1751.2.18.5.11 | NodeisdnConfig | |||
| 1.3.6.1.4.1.1751.2.18.5.11.1 | TableisdnIntfConfigTable | not-accessible | current | Table of ISDN interface configuration attriburtes |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1 | RowisdnIntfConfigEntry | not-accessible | current | Row definition for ISDN interface configuration table |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1.1 | ColumnisdnIntfId | not-accessible | current | Interface ID (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1.2 | ColumnisdnIntfDChanId | read-write | current | D-Channel Number - if the Dchannel no. is 0 no LAPD will run on this PRI-ISDN interface |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1.3 | ColumnisdnIntfAdminStatus | read-write | current | ISDN interface admin status |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1.4 | ColumnisdnIntfOperStatus | read-write | current | ISDN interface operational status |
| 1.3.6.1.4.1.1751.2.18.5.11.1.1.5 | ColumnisdnIntfSwitchType | read-write | current | ISDN interface Switch Type |
| 1.3.6.1.4.1.1751.2.18.5.11.2 | TableisdnL2ConfigTable | not-accessible | current | Table of Layer 2 (LAPD) attributes |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1 | RowisdnL2ConfigEntry | not-accessible | current | Row definition for ISDN LAPD parameters |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.1 | ColumnisdnL2IntfId | not-accessible | current | Interface index (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.2 | ColumnisdnT200 | read-write | current | value of L2 T200 timer in 1/10 seconds |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.3 | ColumnisdnT203 | read-write | current | value of L2 T203 timer in seconds |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.4 | ColumnisdnN200 | read-write | current | Maximum number of retransmissions before the LAPD Link is declared as down |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.5 | ColumnisdnN201 | read-write | current | Maximum number of octets in an information field - Maximum value of this parameter will be 300 bytes. |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.6 | ColumnisdnK | read-write | current | Maximum number of outstanding I frames - L2 - window size. |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.7 | ColumnisdnL2OperStatus | read-only | current | ISDN Layer 2 operational status - not-initiated means that first SETUP message has not been transmitted and L2 estalishment procedure has not been initiated yet |
| 1.3.6.1.4.1.1751.2.18.5.11.2.1.8 | ColumnisdnL2CurrentState | read-only | current | ISDN Layer 2 protocol's current state |
| 1.3.6.1.4.1.1751.2.18.5.11.3 | TableisdnBChanConfigTable | not-accessible | current | Table of ISDN B Channel configuration attriburtes |
| 1.3.6.1.4.1.1751.2.18.5.11.3.1 | RowisdnBChanConfigEntry | not-accessible | current | Row definition for ISDN B Channel configuration table |
| 1.3.6.1.4.1.1751.2.18.5.11.3.1.1 | ColumnisdnBChanId | not-accessible | current | B Chan ID (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.5.11.3.1.2 | ColumnisdnBChanAdminStatus | read-write | current | ISDN B Chan admin status |
| 1.3.6.1.4.1.1751.2.18.5.11.3.1.3 | ColumnisdnBChanOperStatus | read-write | current | ISDN B Chan operational status |
| 1.3.6.1.4.1.1751.2.18.5.12 | TableatmDbCirEmConfigTable | not-accessible | current | Table for ATM DBCES Interface |
| 1.3.6.1.4.1.1751.2.18.5.12.1 | RowatmDbCirEmConfigEntry | not-accessible | current | Row definition for ATM Dynamic Bandwidth Circuit Emulation interface. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.1 | ColumnatmDbCirEmIfIndex | not-accessible | current | Interface index (slot/port/channel) SSPPCCC. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.2 | ColumnatmDbCirEmAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.3 | ColumnatmDbCirEmOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.12.1.7 | ColumnatmDbCirEmIdlePattern | read-write | current | Idle pattern for idle data. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.8 | ColumnatmDbCirEmServiceType | read-write | current | Service type to be used. Affects the ABCD Signaling. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.9 | ColumnatmDbCirEmDbcesType | read-write | current | The type of dbces used. yurie: Yurie proprietary specific. |
| 1.3.6.1.4.1.1751.2.18.5.12.1.10 | ColumnatmDbCirEmIntegrationTime | read-write | current | This specifies the time to wait after receiving idle pattern to change state. The unit is in seconds. |
| 1.3.6.1.4.1.1751.2.18.5.13 | TablelmiDlciConfigTable | not-accessible | current | Table for Lmi DLCI Interface. |
| 1.3.6.1.4.1.1751.2.18.5.13.1 | RowlmiDlciConfigEntry | not-accessible | current | Row definition for Lmi DLCI Interface. |
| 1.3.6.1.4.1.1751.2.18.5.13.1.1 | ColumnlmiDlciIfIndex | not-accessible | current | Interface index (slot/port/channel) SSPPCCC. |
| 1.3.6.1.4.1.1751.2.18.5.13.1.2 | ColumnlmiDlci | not-accessible | current | dlci. |
| 1.3.6.1.4.1.1751.2.18.5.13.1.3 | ColumnlmiDlciOperStatus | read-only | current | The operational status of the lmi protocol: 'outOfService' protocol is out of service 'inService' protocol is in service |
| 1.3.6.1.4.1.1751.2.18.5.13.1.4 | ColumnlmiDlciStatusTime | read-only | current | Time since last status transition occurred. |
| 1.3.6.1.4.1.1751.2.18.5.14 | Tabledsp2ConfigTable | not-accessible | current | Table for Dsp2 Interface |
| 1.3.6.1.4.1.1751.2.18.5.14.1 | Rowdsp2ConfigEntry | not-accessible | current | Row definition for Dsp2 interface |
| 1.3.6.1.4.1.1751.2.18.5.14.1.1 | Columndsp2IfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.14.1.2 | Columndsp2AdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.14.1.3 | Columndsp2OperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.14.1.4 | Columndsp2LoadCount | read-only | current | Gives the number of calls going through that dsp. This will be of use in case of deletion of dsp interface. When no calls are going through the dsp this value … |
| 1.3.6.1.4.1.1751.2.18.5.14.1.5 | Columndsp2AalMode | read-write | current | aal2-non-multiplexed : Does not support multiplexing of multiple channels with one trunk aal2-standard: Support Standard Aal2 Multiplexing aal1:Support Aal1 mo… |
| 1.3.6.1.4.1.1751.2.18.5.15 | TableatmImaConfigTable | not-accessible | current | Inverse Multiplexing interface table. |
| 1.3.6.1.4.1.1751.2.18.5.15.1 | RowatmImaConfigEntry | not-accessible | current | Row definition for Inverse Multiplexing attributes |
| 1.3.6.1.4.1.1751.2.18.5.15.1.1 | ColumnatmImaIntfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.15.1.2 | ColumnatmImaNeTxState | read-only | current | |
| 1.3.6.1.4.1.1751.2.18.5.15.1.3 | ColumnatmImaNeRxState | read-only | current | |
| 1.3.6.1.4.1.1751.2.18.5.15.1.4 | ColumnatmImaFeTxState | read-only | current | |
| 1.3.6.1.4.1.1751.2.18.5.15.1.5 | ColumnatmImaFeRxState | read-only | current | |
| 1.3.6.1.4.1.1751.2.18.5.15.1.6 | ColumnatmImaNeRxDefect | read-only | current | The near-end receive defect. noDefect linkFailure lifDefect (Loss of IMA Frame) lodsDefect (Link Out of Delay Synchronization) |
| 1.3.6.1.4.1.1751.2.18.5.15.1.7 | ColumnatmImaFeRxDefect | read-only | current | The far-end receive defect. noDefect linkFailure lifDefect (Loss of IMA Frame) lodsDefect (Link Out of Delay Synchronization) |
| 1.3.6.1.4.1.1751.2.18.5.15.1.8 | ColumnatmImaAdminStatus | read-write | current | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. |
| 1.3.6.1.4.1.1751.2.18.5.15.1.9 | ColumnatmImaOperStatus | read-only | current | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.16 | TableatmPnniConfigTable | not-accessible | current | Table of atm PNNI Configuration |
| 1.3.6.1.4.1.1751.2.18.5.16.1 | RowatmPnniConfigEntry | not-accessible | current | Row definition of PNNI Configuration |
| 1.3.6.1.4.1.1751.2.18.5.16.1.1 | ColumnatmPnniIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.16.1.2 | ColumnatmPnniSvcMinVpi | read-write | current | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.3 | ColumnatmPnniSvcMaxVpi | read-write | current | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.4 | ColumnatmPnniSvcMinVci | read-write | current | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.5 | ColumnatmPnniSvcMaxVci | read-write | current | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.6 | ColumnatmPnniAdminStatus | read-write | current | The administrative action: 'outOfService' means take the PNNI out of service 'inService' means take the PNNI in service 'delete' remove/deconfigure the PNNI. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.7 | ColumnatmPnniOperStatus | read-only | current | The operational status of the PNNI: 'outOfService' means the PNNI is out of service 'inService' means the PNNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.16.1.8 | ColumnatmPnniT303 | read-write | current | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.9 | ColumnatmPnniT308 | read-write | current | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.10 | ColumnatmPnniT309 | read-write | current | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.11 | ColumnatmPnniT310 | read-write | current | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.12 | ColumnatmPnniT313 | read-write | current | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.13 | ColumnatmPnniT316 | read-write | current | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.14 | ColumnatmPnniT317 | read-write | current | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.15 | ColumnatmPnniT322 | read-write | current | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.16 | ColumnatmPnniT397 | read-write | current | Timer T397 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.17 | ColumnatmPnniT398 | read-write | current | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.18 | ColumnatmPnniT399 | read-write | current | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.19 | ColumnatmPnniCbrServCatSupp | read-write | current | If CBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.20 | ColumnatmPnniCbrGcacClpEqualZero | read-write | current | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.21 | ColumnatmPnniCbrMaxCellRate | read-write | current | CBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.22 | ColumnatmPnniCbrAvailCellRate | read-write | current | CBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.23 | ColumnatmPnniCbrCellXerDelay | read-write | current | CBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.24 | ColumnatmPnniCbrCellLossRatioZero | read-write | current | CBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.25 | ColumnatmPnniCbrCellLossRatioZeroPlusOne | read-write | current | CBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.26 | ColumnatmPnniCbrCellDelayVar | read-write | current | CBR category Cell Delay Variation |
| 1.3.6.1.4.1.1751.2.18.5.16.1.27 | ColumnatmPnniRtVbrServCatSupp | read-write | current | If RT VBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.28 | ColumnatmPnniRtVbrGcacClpEqualZero | read-write | current | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.29 | ColumnatmPnniRtVbrMaxCellRate | read-write | current | RT VBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.30 | ColumnatmPnniRtVbrAvailCellRate | read-write | current | RT VBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.31 | ColumnatmPnniRtVbrCellXerDelay | read-write | current | RT VBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.32 | ColumnatmPnniRtVbrCellLossRatioZero | read-write | current | RT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.33 | ColumnatmPnniRtVbrCellLossRatioZeroPlusOne | read-write | current | RT VBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.34 | ColumnatmPnniRtVbrCellDelayVar | read-write | current | RT VBR category Cell Delay Variation |
| 1.3.6.1.4.1.1751.2.18.5.16.1.35 | ColumnatmPnniRtVbrGcacPresent | read-write | current | If RT VBR category GCAC Parameters present |
| 1.3.6.1.4.1.1751.2.18.5.16.1.36 | ColumnatmPnniRtVbrCellRateMargin | read-write | current | RT VBR category Cell Rate Margin |
| 1.3.6.1.4.1.1751.2.18.5.16.1.37 | ColumnatmPnniRtVbrVarianceFactor | read-write | current | RT VBR category Variance Factor |
| 1.3.6.1.4.1.1751.2.18.5.16.1.38 | ColumnatmPnniNrtVbrServCatSupp | read-write | current | If NRT VBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.39 | ColumnatmPnniNrtVbrGcacClpEqualZero | read-write | current | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.40 | ColumnatmPnniNrtVbrMaxCellRate | read-write | current | NRT VBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.41 | ColumnatmPnniNrtVbrAvailCellRate | read-write | current | NRT VBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.42 | ColumnatmPnniNrtVbrCellXerDelay | read-write | current | NRT VBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.43 | ColumnatmPnniNrtVbrCellLossRatioZero | read-write | current | NRT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.44 | ColumnatmPnniNrtVbrCellLossRatioZeroPlusOne | read-write | current | NRT VBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.45 | ColumnatmPnniNrtVbrGcacPresent | read-write | current | If NRT VBR category GCAC Parameters present |
| 1.3.6.1.4.1.1751.2.18.5.16.1.46 | ColumnatmPnniNrtVbrCellRateMargin | read-write | current | NRT VBR category Cell Rate Margin |
| 1.3.6.1.4.1.1751.2.18.5.16.1.47 | ColumnatmPnniNrtVbrVarianceFactor | read-write | current | NRT VBR category Variance Factor |
| 1.3.6.1.4.1.1751.2.18.5.16.1.48 | ColumnatmPnniAbrServCatSupp | read-write | current | If ABR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.49 | ColumnatmPnniAbrMaxCellRate | read-write | current | ABR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.50 | ColumnatmPnniAbrAvailCellRate | read-write | current | ABR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.51 | ColumnatmPnniUbrServCatSupp | read-write | current | UBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.52 | ColumnatmPnniUbrMaxCellRate | read-write | current | NRT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.53 | ColumnatmPnniOverSubscription | read-write | current | Over subscription factor for PNNI Intf. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.54 | ColumnatmPnniSgnlEnabled | read-write | current | Indicates if atm signaling is enabled or disabled for this PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.55 | ColumnatmPnniVpiSig | read-write | current | VPI value for the signalling channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.56 | ColumnatmPnniVciSig | read-write | current | VCI value for the signalling channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.57 | ColumnatmPnniAvailBwIgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.58 | ColumnatmPnniAvailBwEgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.59 | ColumnatmPnniUPCSupp | read-write | current | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.16.1.60 | ColumnatmPnniUbrLoadBalSupp | read-write | current | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.16.1.61 | ColumnatmPnniSscopRxWndSz | read-write | current | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.16.1.62 | ColumnatmPnniRemoteSvcMinVpi | read-only | current | The lower bound of the actual VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.63 | ColumnatmPnniRemoteSvcMaxVpi | read-only | current | The Upper bound of the actual VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.64 | ColumnatmPnniRemoteSvcMinVci | read-only | current | The lower bound of the actual VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.65 | ColumnatmPnniRemoteSvcMaxVci | read-only | current | The Upper bound of the actual VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.66 | ColumnatmPnniVpiIlmi | read-write | current | VPI value for the ilmi channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.67 | ColumnatmPnniVciIlmi | read-write | current | VCI value for the ilmi channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.68 | ColumnatmPnniIlmiProtocolStatus | read-write | current | The administrative status: 'enabled' - ILMI protocol enabled on PNNI 'disabled' - ILMI protocol disabled on PNNI . |
| 1.3.6.1.4.1.1751.2.18.5.16.1.69 | ColumnatmPnniIlmiOperStatus | read-only | current | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.70 | ColumnatmPnniIlmiConfigProc | read-write | current | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.71 | ColumnatmPnniIlmiConnectProc | read-write | current | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.72 | ColumnatmPnniIlmiAttachPtProc | read-write | current | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.73 | ColumnatmPnniIlmiSecureLinkProc | read-write | current | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.74 | ColumnatmPnniIlmiAddrRegProc | read-write | current | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.75 | ColumnatmPnniIlmiTimerS | read-write | current | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.76 | ColumnatmPnniIlmiTimerT | read-write | current | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.77 | ColumnatmPnniIlmiRetryK | read-write | current | Retry K - number of timeouts of before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.78 | ColumnatmPnniConnTrafficShapingFlag | read-write | current | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shapi… |
| 1.3.6.1.4.1.1751.2.18.5.17 | TableatmVnnConfigTable | not-accessible | current | Table of atm user to network interface (UNI) |
| 1.3.6.1.4.1.1751.2.18.5.17.1 | RowatmVnnConfigEntry | not-accessible | current | Row definition of atm UNI |
| 1.3.6.1.4.1.1751.2.18.5.17.1.1 | ColumnatmVnnIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.17.1.2 | ColumnatmVnnAddrType | read-write | current | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.17.1.3 | ColumnatmVnnSvcMinVpi | read-write | current | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.4 | ColumnatmVnnSvcMaxVpi | read-write | current | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.5 | ColumnatmVnnSvcMinVci | read-write | current | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.6 | ColumnatmVnnSvcMaxVci | read-write | current | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.7 | ColumnatmVnnAdminStatus | read-write | current | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.8 | ColumnatmVnnOperStatus | read-only | current | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.17.1.9 | ColumnatmVnnOverSubscription | read-write | current | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.17.1.10 | ColumnatmVnnNwPrefix1 | read-only | current | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.17.1.11 | ColumnatmVnnT303 | read-write | current | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.12 | ColumnatmVnnT308 | read-write | current | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.13 | ColumnatmVnnT309 | read-write | current | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.14 | ColumnatmVnnT310 | read-write | current | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.15 | ColumnatmVnnT313 | read-write | current | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.16 | ColumnatmVnnT316 | read-write | current | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.17 | ColumnatmVnnT317 | read-write | current | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.18 | ColumnatmVnnT322 | read-write | current | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.19 | ColumnatmVnnT398 | read-write | current | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.20 | ColumnatmVnnT399 | read-write | current | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.21 | ColumnatmVnnMyNeighborIpAddress | read-write | current | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams… |
| 1.3.6.1.4.1.1751.2.18.5.17.1.22 | ColumnatmVnnMyNeighborIfName | read-write | current | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is mana… |
| 1.3.6.1.4.1.1751.2.18.5.17.1.23 | ColumnatmVnnVpiSig | read-write | current | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.24 | ColumnatmVnnVciSig | read-write | current | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.25 | ColumnatmVnnVpiIlmi | read-write | current | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.26 | ColumnatmVnnVciIlmi | read-write | current | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.27 | ColumnatmVnnAtmSignalingStatus | read-only | current | Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces |
| 1.3.6.1.4.1.1751.2.18.5.17.1.28 | ColumnatmVnnMyIfName | read-write | current | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identic… |
| 1.3.6.1.4.1.1751.2.18.5.17.1.29 | ColumnatmVnnIlmiProtocolStatus | read-only | current | The administrative status: 'enabled' - ILMI protocol enabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.30 | ColumnatmVnnIlmiOperStatus | read-only | current | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.31 | ColumnatmVnnIlmiConfigProc | read-only | current | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.32 | ColumnatmVnnIlmiConnectProc | read-only | current | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.33 | ColumnatmVnnIlmiAttachPtProc | read-only | current | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.34 | ColumnatmVnnIlmiSecureLinkProc | read-only | current | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.35 | ColumnatmVnnIlmiAddrRegProc | read-only | current | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.36 | ColumnatmVnnIlmiTimerS | read-write | current | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.37 | ColumnatmVnnIlmiTimerT | read-write | current | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.38 | ColumnatmVnnIlmiRetryK | read-write | current | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.39 | ColumnatmVnnAvailBwIgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.40 | ColumnatmVnnAvailBwEgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.41 | ColumnatmVnnUPCSupp | read-write | current | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.17.1.42 | ColumnatmVnnUbrLoadBalSupp | read-write | current | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.17.1.43 | ColumnatmVnnSscopRxWndSz | read-write | current | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.18 | TablevirtualIntfConfigTable | not-accessible | current | Table of Virtual Interfaces Configurations |
| 1.3.6.1.4.1.1751.2.18.5.18.1 | RowvirtualIntfConfigEntry | not-accessible | current | Index is the Interface and the Virutal Interface |
| 1.3.6.1.4.1.1751.2.18.5.18.1.1 | ColumnvirtualIntfConfigIf | not-accessible | current | Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.5.18.1.2 | ColumnvirtualIntfConfigVi | not-accessible | current | VI value. Def Val is 1 because 0 cannot be configured |
| 1.3.6.1.4.1.1751.2.18.5.18.1.3 | ColumnvirtualIntfConfigCellRate | read-write | current | Bandwidth assigned for the VI. The unit is cells per sec. Total Bandwidth of all VI's cannot exceed bandwidth of the main interface. CAC will be supported per … |
| 1.3.6.1.4.1.1751.2.18.5.18.1.4 | ColumnvirtualIntfConfigOverSubs | read-write | current | Over Subscription rate for VI |
| 1.3.6.1.4.1.1751.2.18.5.18.1.5 | ColumnvirtualIntfConfigRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.5.18.1.6 | ColumnvirtualIntfConfigUPCSupp | read-write | current | virtual interface upc supp off/on If this is changed then all the connections on this interface will be replayed. |
| 1.3.6.1.4.1.1751.2.18.5.18.1.7 | ColumnvirtualIntfAvailBwEgr | read-only | current | Avail Bw for that VI in cells per sec in the Egress Direction or the direction away from back plane. |
| 1.3.6.1.4.1.1751.2.18.5.19 | TablevirtualUNIConfigTable | not-accessible | current | Table of Virtual UNI Interfaces Configurations |
| 1.3.6.1.4.1.1751.2.18.5.19.1 | RowvirtualUNIConfigEntry | not-accessible | current | Index is the Interface and the Virutal UNI Interface |
| 1.3.6.1.4.1.1751.2.18.5.19.1.1 | ColumnvirtualUNIIfIndex | not-accessible | current | This is the first index to the Virtual UNI Interface table. Interface index will be of the form SSPPCCC, where SS is the card slot, PP is the port number, and … |
| 1.3.6.1.4.1.1751.2.18.5.19.1.2 | ColumnvirtualUNIVUNIId | not-accessible | current | Virtual UNI number, second index to access the virtual UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.3 | ColumnvirtualUNIVISupport | read-write | current | Virtual Interface (Traffic Shaping) is enabled or disabled on this VUNI. A Virtual Interface should already be configured befaore the traffic shaping can be en… |
| 1.3.6.1.4.1.1751.2.18.5.19.1.4 | ColumnvirtualUNIMinVpi | read-write | current | Lower value of the VPI range for this VUNI |
| 1.3.6.1.4.1.1751.2.18.5.19.1.5 | ColumnvirtualUNIMaxVpi | read-write | current | Upper value of the VPI range for this VUNI |
| 1.3.6.1.4.1.1751.2.18.5.19.1.6 | ColumnvirtualUNIConfigRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.5.19.1.7 | ColumnvirtualUNIAddrType | read-write | current | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.19.1.8 | ColumnvirtualUNISvcMinVpi | read-write | current | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.9 | ColumnvirtualUNISvcMaxVpi | read-write | current | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.10 | ColumnvirtualUNISvcMinVci | read-write | current | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.11 | ColumnvirtualUNISvcMaxVci | read-write | current | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.12 | ColumnvirtualUNIAdminStatus | read-write | current | The administrative action: 'outOfService' means take the VUNI out of service 'inService' means take the VUNI in service |
| 1.3.6.1.4.1.1751.2.18.5.19.1.13 | ColumnvirtualUNIOperStatus | read-only | current | The operational status of the VUNI: 'outOfService' means the VUNI is out of service 'inService' means the VUNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.19.1.14 | ColumnvirtualUNINwPrefix1 | read-write | current | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.19.1.15 | ColumnvirtualUNIT303 | read-write | current | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.16 | ColumnvirtualUNIT308 | read-write | current | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.17 | ColumnvirtualUNIT309 | read-write | current | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.18 | ColumnvirtualUNIT310 | read-write | current | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.19 | ColumnvirtualUNIT313 | read-write | current | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.20 | ColumnvirtualUNIT316 | read-write | current | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.21 | ColumnvirtualUNIT317 | read-write | current | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.22 | ColumnvirtualUNIT322 | read-write | current | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.23 | ColumnvirtualUNIT398 | read-write | current | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.24 | ColumnvirtualUNIT399 | read-write | current | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.19.1.25 | ColumnvirtualUNIMyNeighborIpAddress | read-write | current | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams… |
| 1.3.6.1.4.1.1751.2.18.5.19.1.27 | ColumnvirtualUNIMyNeighborIfName | read-write | current | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is mana… |
| 1.3.6.1.4.1.1751.2.18.5.19.1.28 | ColumnvirtualUNIVpiSig | read-write | current | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.29 | ColumnvirtualUNIVciSig | read-write | current | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.30 | ColumnvirtualUNISignalingAdminStatus | read-write | current | Indicates if atm signaling is enabled or disabled for this VUNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.31 | ColumnvirtualUNISignalingOperStatus | read-only | current | The protocol operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.19.1.32 | ColumnvirtualUNIVpiIlmi | read-write | current | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.33 | ColumnvirtualUNIVciIlmi | read-write | current | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.34 | ColumnvirtualUNIMyIfName | read-write | current | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identic… |
| 1.3.6.1.4.1.1751.2.18.5.19.1.35 | ColumnvirtualUNIIlmiProtocolStatus | read-write | current | The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.36 | ColumnvirtualUNIIlmiOperStatus | read-only | current | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.37 | ColumnvirtualUNIIlmiConfigProc | read-write | current | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.38 | ColumnvirtualUNIIlmiConnectProc | read-write | current | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.39 | ColumnvirtualUNIIlmiAttachPtProc | read-write | current | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.40 | ColumnvirtualUNIIlmiSecureLinkProc | read-write | current | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.41 | ColumnvirtualUNIIlmiAddrRegProc | read-write | current | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.42 | ColumnvirtualUNIIlmiTimerS | read-write | current | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.43 | ColumnvirtualUNIIlmiTimerT | read-write | current | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.44 | ColumnvirtualUNIIlmiRetryK | read-write | current | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.19.1.45 | ColumnvirtualUNIIntfType | read-write | current | atm interface type |
| 1.3.6.1.4.1.1751.2.18.5.19.1.46 | ColumnvirtualUNIUserAddress | read-write | current | ATM User Address |
| 1.3.6.1.4.1.1751.2.18.5.19.1.47 | ColumnvirtualUNIUserAddrOrgScope | read-write | current | ATM User Address Organizational scope |
| 1.3.6.1.4.1.1751.2.18.5.19.1.48 | ColumnvirtualUNISscopRxWndSz | read-write | current | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.20 | NodecasConfig | |||
| 1.3.6.1.4.1.1751.2.18.5.20.1 | TablecasConfigTable | not-accessible | current | Table for CAS trunk/line configuration. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1 | RowcasConfigEntry | not-accessible | current | Row definition for CAS trunk/line configuration. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.1 | ColumncasIfIndex | not-accessible | current | The channel ID (slot/port/channel) in SSPPCCC format associated with the CAS trunk/line. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.2 | ColumncasAdminStatus | read-write | current | The administrative action: outOfService-take the CAS trunk/line out of service, inService-take the CAS trunk/line in service, delete-remove/deconfigure the CAS… |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.3 | ColumncasOperStatus | read-only | current | The operational status of the CAS trunk/line: outOfService-the CAS trunk/line is out of service, inService-the CAS trunk/line is in service. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.4 | ColumncasProtocolType | read-write | current | The type of CAS protocol to be used. The protocol must match the one used on the other end of the trunk/line. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.5 | ColumncasDirection | read-write | current | The direction of traffic flow on this CAS trunk/line. |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.6 | ColumncasAddressingType | read-write | current | The addressing type used for the CAS trunk/line. dtmf r1-mf r2-mf Type of 're-mf' is valid only when casProtocolType is 'wink start', while 'r2-mf' is valid on… |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.7 | ColumncasBitPatternType | read-only | current | The type of bit pattern used for supervisory signaling. The value is AB when SF framing is used, ABCD when ESF framing is used for DS1. In case of E1, the valu… |
| 1.3.6.1.4.1.1751.2.18.5.20.1.1.8 | ColumncasGroupId | read-write | current | The identifier to associate a group of CAS trunks/lines which have same reachability. When SG is disabled, it must be specified with a non-zero value. When SG … |
| 1.3.6.1.4.1.1751.2.18.5.21 | TabletoneAnnceConfigTable | not-accessible | current | Table for the Tone Announcement Interface |
| 1.3.6.1.4.1.1751.2.18.5.21.1 | RowtoneAnnceConfigEntry | not-accessible | current | Row definition for Tone Announcement interface |
| 1.3.6.1.4.1.1751.2.18.5.21.1.1 | ColumntoneAnnceIfIndex | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.21.1.2 | ColumntoneAnnceAdminStatus | read-write | current | The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure t… |
| 1.3.6.1.4.1.1751.2.18.5.21.1.3 | ColumntoneAnnceOperStatus | read-only | current | The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.22 | Nodegr303IntfConfig | |||
| 1.3.6.1.4.1.1751.2.18.5.22.1 | Tablegr303IntfConfigTable | not-accessible | current | Table of GR303 interface configuration attributes |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1 | Rowgr303IntfConfigEntry | not-accessible | current | Row definition for GR303 interface configuration table |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1.1 | Columngr303IntfId | not-accessible | current | Interface ID (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1.2 | Columngr303TMCChannelId | read-write | current | TMC-Channel Number. If TMC Channel is set to 0 there will be no TMC channel on the corresponding DS1. Generally the TMC channel should be specified on the one … |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1.3 | Columngr303EOCChannelId | read-write | current | EOC-Channel Number. If EOC Channel is set to 0 there will be no EOC channel on the corresponding DS1. Generally the TMC channel should be specified on the one … |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1.4 | Columngr303IntfAdminStatus | read-write | current | GR303 interface admin status |
| 1.3.6.1.4.1.1751.2.18.5.22.1.1.5 | Columngr303IntfOperStatus | read-write | current | GR303 interface operational status |
| 1.3.6.1.4.1.1751.2.18.5.22.2 | Tablegr303Ds0ChanConfigTable | not-accessible | current | Table of GR303 DS0 Channel configuration attriburtes |
| 1.3.6.1.4.1.1751.2.18.5.22.2.1 | Rowgr303Ds0ChanConfigEntry | not-accessible | current | Row definition for GR303 DS0 Channel configuration table |
| 1.3.6.1.4.1.1751.2.18.5.22.2.1.1 | Columngr303Ds0ChanId | not-accessible | current | GR303 DS0 Chan ID (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.5.22.2.1.2 | Columngr303Ds0ChanAdminStatus | read-write | current | GR303 Ds0 Chan admin status |
| 1.3.6.1.4.1.1751.2.18.5.22.2.1.3 | Columngr303Ds0ChanOperStatus | read-write | current | GR303 Ds0 Chan operational status |
| 1.3.6.1.4.1.1751.2.18.6 | NodeconnectionConfig | |||
| 1.3.6.1.4.1.1751.2.18.6.1 | TableatmPvcVccTable | not-accessible | current | Table of PVC atm virtual channel connections |
| 1.3.6.1.4.1.1751.2.18.6.1.1 | RowatmPvcVccEntry | not-accessible | current | Row definition of atm PVC VCC connections |
| 1.3.6.1.4.1.1751.2.18.6.1.1.1 | ColumnatmPvcVccIfA | not-accessible | current | Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.2 | ColumnatmPvcVccVpiA | not-accessible | current | VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.3 | ColumnatmPvcVccVciA | not-accessible | current | VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.4 | ColumnatmPvcVccIfB | not-accessible | current | Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.5 | ColumnatmPvcVccVpiB | not-accessible | current | VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.6 | ColumnatmPvcVccVciB | not-accessible | current | VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.7 | ColumnatmPvcVccServiceTypeA2B | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.1.1.8 | ColumnatmPvcVccSarTypeA2B | read-write | current | SAR type used in atm adaption |
| 1.3.6.1.4.1.1751.2.18.6.1.1.10 | ColumnatmPvcVccPeakCellRateA2B | read-write | current | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.1.1.11 | ColumnatmPvcVccSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.1.1.12 | ColumnatmPvcVccMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.1.1.13 | ColumnatmPvcVccServiceTypeB2A | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.1.1.14 | ColumnatmPvcVccSarTypeB2A | read-write | current | sar type used in atm adaption |
| 1.3.6.1.4.1.1751.2.18.6.1.1.16 | ColumnatmPvcVccPeakCellRateB2A | read-write | current | peak rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.17 | ColumnatmPvcVccSusCellRateB2A | read-write | current | sustained rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.18 | ColumnatmPvcVccMaxBurstSizeB2A | read-write | current | maximum burst size - side B, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.20 | ColumnatmPvcVccType | read-write | current | type of connection |
| 1.3.6.1.4.1.1751.2.18.6.1.1.21 | ColumnatmPvcVccFlow | read-write | current | type of flow |
| 1.3.6.1.4.1.1751.2.18.6.1.1.22 | ColumnatmPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.1.1.23 | ColumnatmPvcVccFrwdErrCorrectionA2B | read-write | current | Forward error correction scheme |
| 1.3.6.1.4.1.1751.2.18.6.1.1.24 | ColumnatmPvcVccFrwdErrCorrectionB2A | read-write | current | Forward error correction scheme |
| 1.3.6.1.4.1.1751.2.18.6.1.1.25 | ColumnatmPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.26 | ColumnatmPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.27 | ColumnatmPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.28 | ColumnatmPvcVccViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.1.1.29 | ColumnatmPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.1.1.30 | ColumnatmPvcVccCnfrmTypeA2B | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.31 | ColumnatmPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.32 | ColumnatmPvcVccVUNIA | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.1.1.33 | ColumnatmPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.1.1.34 | ColumnatmPvcVccOamStatusB | read-write | current | Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are… |
| 1.3.6.1.4.1.1751.2.18.6.1.1.35 | ColumnatmPvcVccOAMConnEndPtStatusA | read-only | current | Connection endpoint side A status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.36 | ColumnatmPvcVccOAMConnEndPtStatusB | read-only | current | Connection endpoint side B status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.37 | ColumnatmPvcVccOAMConnSegEndPtStatusA | read-only | current | Segment endpoint side A status. Valid only at segment endpoints. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.38 | ColumnatmPvcVccOAMConnSegEndPtStatusB | read-only | current | Segment endpoint side B status. Valid only at segment endpoints. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.39 | ColumnatmPvcVccMfsA2B | read-write | current | Maximum Frame Size for GFR traffic for A2B dir |
| 1.3.6.1.4.1.1751.2.18.6.1.1.40 | ColumnatmPvcVccMfsB2A | read-write | current | Maximum Frame Size for GFR traffic for B2A dir |
| 1.3.6.1.4.1.1751.2.18.6.1.1.41 | ColumnatmPvcVccConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.1.1.42 | ColumnatmPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.1.1.43 | ColumnatmPvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.1.1.44 | ColumnatmPvcVccTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.2 | TableatmPvcVpcTable | not-accessible | current | Table of PVC atm virtual path connections |
| 1.3.6.1.4.1.1751.2.18.6.2.1 | RowatmPvcVpcEntry | not-accessible | current | Row definition of atm connections |
| 1.3.6.1.4.1.1751.2.18.6.2.1.1 | ColumnatmPvcVpcIfA | not-accessible | current | Interface index for side A of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.2 | ColumnatmPvcVpcVpiA | not-accessible | current | VPI value for side A of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.3 | ColumnatmPvcVpcIfB | not-accessible | current | Interface index for side B of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.4 | ColumnatmPvcVpcVpiB | not-accessible | current | VPI value for side B of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.5 | ColumnatmPvcVpcServiceTypeA2B | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.6 | ColumnatmPvcVpcSarTypeA2B | read-write | current | SAR Type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.8 | ColumnatmPvcVpcPeakCellRateA2B | read-write | current | peak rate - side A, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.9 | ColumnatmPvcVpcSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.10 | ColumnatmPvcVpcMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.11 | ColumnatmPvcVpcServiceTypeB2A | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.12 | ColumnatmPvcVpcSarTypeB2A | read-write | current | SAR Type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.14 | ColumnatmPvcVpcPeakCellRateB2A | read-write | current | peak rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.15 | ColumnatmPvcVpcSusCellRateB2A | read-write | current | sustained rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.16 | ColumnatmPvcVpcMaxBurstSizeB2A | read-write | current | maximum burst size - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.17 | ColumnatmPvcVpcType | read-write | current | security feature type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.18 | ColumnatmPvcVpcFlow | read-write | current | flow type |
| 1.3.6.1.4.1.1751.2.18.6.2.1.19 | ColumnatmPvcVpcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.2.1.20 | ColumnatmPvcVpcConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.21 | ColumnatmPvcVpcOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.22 | ColumnatmPvcVpcDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.23 | ColumnatmPvcVpcViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.2.1.24 | ColumnatmPvcVpcViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.2.1.25 | ColumnatmPvcVpcCnfrmTypeA2B | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.26 | ColumnatmPvcVpcCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.27 | ColumnatmPvcVpcVUNIA | read-write | current | VUNI Id to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.2.1.28 | ColumnatmPvcVpcVUNIB | read-write | current | VUNI Id to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.2.1.29 | ColumnatmPvcVpcOamStatusB | read-write | current | Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are… |
| 1.3.6.1.4.1.1751.2.18.6.2.1.30 | ColumnatmPvcVpcOAMConnEndPtStatusA | read-only | current | Connection endpoint side A status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.31 | ColumnatmPvcVpcOAMConnEndPtStatusB | read-only | current | Connection endpoint side B status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.32 | ColumnatmPvcVpcOAMConnSegEndPtStatusA | read-only | current | Segment endpoint side A status. Valid only at segment/connection endpoints. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.33 | ColumnatmPvcVpcOAMConnSegEndPtStatusB | read-only | current | Segment endpoint side B status. Valid only at segment/connection endpoints. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.34 | ColumnatmPvcVpcConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.2.1.35 | ColumnatmPvcVpcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.2.1.36 | ColumnatmPvcVpcTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.2.1.37 | ColumnatmPvcVpcTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.3 | TableatmSvcVccTable | not-accessible | current | Table of atm connections |
| 1.3.6.1.4.1.1751.2.18.6.3.1 | RowatmSvcVccEntry | not-accessible | current | Row definition of atm connections |
| 1.3.6.1.4.1.1751.2.18.6.3.1.1 | ColumnatmSvcVccIfA | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.6.3.1.2 | ColumnatmSvcVccVpiA | not-accessible | current | atm path identifier - side A |
| 1.3.6.1.4.1.1751.2.18.6.3.1.3 | ColumnatmSvcVccVciA | not-accessible | current | atm channel identifier - side A |
| 1.3.6.1.4.1.1751.2.18.6.3.1.4 | ColumnatmSvcVccIfB | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.6.3.1.5 | ColumnatmSvcVccVpiB | not-accessible | current | atm path identifier - side B |
| 1.3.6.1.4.1.1751.2.18.6.3.1.6 | ColumnatmSvcVccVciB | not-accessible | current | atm channel identifier - side B |
| 1.3.6.1.4.1.1751.2.18.6.3.1.7 | ColumnatmSvcVccServiceTypeA2B | read-only | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.3.1.8 | ColumnatmSvcVccSarTypeA2B | read-only | current | sar type - A to B direction |
| 1.3.6.1.4.1.1751.2.18.6.3.1.10 | ColumnatmSvcVccPeakCellRateA2B | read-only | current | peak rate - side A |
| 1.3.6.1.4.1.1751.2.18.6.3.1.11 | ColumnatmSvcVccSusCellRateA2B | read-only | current | sustained rate - side A |
| 1.3.6.1.4.1.1751.2.18.6.3.1.12 | ColumnatmSvcVccMaxBurstSizeA2B | read-only | current | maximum burst size - side A |
| 1.3.6.1.4.1.1751.2.18.6.3.1.13 | ColumnatmSvcVccServiceTypeB2A | read-only | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.3.1.14 | ColumnatmSvcVccSarTypeB2A | read-only | current | sar type - B to A direction |
| 1.3.6.1.4.1.1751.2.18.6.3.1.16 | ColumnatmSvcVccPeakCellRateB2A | read-only | current | peak rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.3.1.17 | ColumnatmSvcVccSusCellRateB2A | read-only | current | sustained rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.3.1.18 | ColumnatmSvcVccMaxBurstSizeB2A | read-only | current | maximum burst size - side B |
| 1.3.6.1.4.1.1751.2.18.6.3.1.19 | ColumnatmSvcVccFlow | read-only | current | flow type |
| 1.3.6.1.4.1.1751.2.18.6.3.1.20 | ColumnatmSvcVccType | read-only | current | type of connection |
| 1.3.6.1.4.1.1751.2.18.6.3.1.21 | ColumnatmSvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.3.1.22 | ColumnatmSvcVccViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.3.1.23 | ColumnatmSvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.3.1.24 | ColumnatmSvcVccCnfrmTypeA2B | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.3.1.25 | ColumnatmSvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.3.1.26 | ColumnatmSvcVccVUNIA | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.3.1.27 | ColumnatmSvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.3.1.28 | ColumnatmSvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.3.1.29 | ColumnatmSvcVccTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.4 | TableipAtmAppPvcVccTable | not-accessible | current | Table about in-band management atm connection entries. |
| 1.3.6.1.4.1.1751.2.18.6.4.1 | RowipAtmAppPvcVccEntry | not-accessible | current | Row definition of in-band management atm connection attribution. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.1 | ColumnipAtmAppPvcVccDestAddrA | not-accessible | current | Destination IP address of an in-band management- atm connection. Value is and IP address. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.2 | ColumnipAtmAppPvcVccSubnetMaskA | not-accessible | current | The subnet mask of the destination IP address. Value is an IP address. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.3 | ColumnipAtmAppPvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of an in-band management-atm connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS i… |
| 1.3.6.1.4.1.1751.2.18.6.4.1.4 | ColumnipAtmAppPvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.5 | ColumnipAtmAppPvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.6 | ColumnipAtmAppPvcVccServiceTypeA2B | read-write | current | Service type from side A to B |
| 1.3.6.1.4.1.1751.2.18.6.4.1.7 | ColumnipAtmAppPvcVccServiceTypeB2A | read-write | current | Service type from side B to A |
| 1.3.6.1.4.1.1751.2.18.6.4.1.8 | ColumnipAtmAppPvcVccPeakCellRateB2A | read-write | current | peak rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.4.1.9 | ColumnipAtmAppPvcVccSusCellRateB2A | read-write | current | sustained rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.4.1.10 | ColumnipAtmAppPvcVccMaxBurstSizeB2A | read-write | current | maximum burst size - side B |
| 1.3.6.1.4.1.1751.2.18.6.4.1.11 | ColumnipAtmAppPvcVccType | read-only | current | Indicated in-band management atm connection type. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.12 | ColumnipAtmAppPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.4.1.13 | ColumnipAtmAppPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.4.1.14 | ColumnipAtmAppPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.15 | ColumnipAtmAppPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.4.1.16 | ColumnipAtmAppPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.4.1.17 | ColumnipAtmAppPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.4.1.18 | ColumnipAtmAppPvcVccMfsB2A | read-write | current | Maximum Frame Size for GFR traffic |
| 1.3.6.1.4.1.1751.2.18.6.4.1.19 | ColumnipAtmAppPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.4.1.20 | ColumnipAtmAppPvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.4.1.21 | ColumnipAtmAppPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond t… |
| 1.3.6.1.4.1.1751.2.18.6.5 | TableipAtmAppSvcVccTable | not-accessible | current | Table of SVC VCC connection entries |
| 1.3.6.1.4.1.1751.2.18.6.5.1 | RowipAtmAppSvcVccEntry | not-accessible | current | Row definition of SVC VCC connection attribution. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.1 | ColumnipAtmAppSvcVccDestAddrA | not-accessible | current | Destination IP address,value is IP address. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.2 | ColumnipAtmAppSvcVccSubnetMaskA | not-accessible | current | The subnet mask of the destination IP address. Value is an IP address. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.3 | ColumnipAtmAppSvcVccIfB | not-accessible | current | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.6.5.1.4 | ColumnipAtmAppSvcVccVpiB | not-accessible | current | atm path identifier - side B |
| 1.3.6.1.4.1.1751.2.18.6.5.1.5 | ColumnipAtmAppSvcVccVciB | not-accessible | current | atm channel identifier - side B |
| 1.3.6.1.4.1.1751.2.18.6.5.1.6 | ColumnipAtmAppSvcVccServiceTypeA2B | read-only | current | Service type from side A to B. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.7 | ColumnipAtmAppSvcVccServiceTypeB2A | read-only | current | Service type from side B to A. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.8 | ColumnipAtmAppSvcVccPeakCellRateB2A | read-only | current | peak rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.5.1.9 | ColumnipAtmAppSvcVccSusCellRateB2A | read-only | current | sustained rate - side B |
| 1.3.6.1.4.1.1751.2.18.6.5.1.10 | ColumnipAtmAppSvcVccMaxBurstSizeB2A | read-only | current | maximum burst size - side B |
| 1.3.6.1.4.1.1751.2.18.6.5.1.11 | ColumnipAtmAppSvcVccType | read-only | current | Type of using SVC VCC connection. |
| 1.3.6.1.4.1.1751.2.18.6.5.1.12 | ColumnipAtmAppSvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.5.1.13 | ColumnipAtmAppSvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.5.1.14 | ColumnipAtmAppSvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.5.1.15 | ColumnipAtmAppSvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.5.1.16 | ColumnipAtmAppSvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.6 | TablecirEmAtmPvcVccTable | not-accessible | current | Table of Circuit Emulation to ATM VCCs |
| 1.3.6.1.4.1.1751.2.18.6.6.1 | RowcirEmAtmPvcVccEntry | not-accessible | current | Row definition of circuit emulation to atm connections. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.1 | ColumncirEmAtmPvcVccIfA | not-accessible | current | Interface index for side A, the circuit emulation side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form,… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.2 | ColumncirEmAtmPvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.3 | ColumncirEmAtmPvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.4 | ColumncirEmAtmPvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.5 | ColumncirEmAtmPvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.6.1.6 | ColumncirEmAtmPvcVccVoiceCompressionA2B | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.6.1.7 | ColumncirEmAtmPvcVccSilenceDetectionA2B | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.6.1.8 | ColumncirEmAtmPvcVccEchoCancellationA2B | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.6.1.9 | ColumncirEmAtmPvcVccFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.6.1.10 | ColumncirEmAtmPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.6.1.11 | ColumncirEmAtmPvcVccCngToneDetectionA2B | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is … |
| 1.3.6.1.4.1.1751.2.18.6.6.1.12 | ColumncirEmAtmPvcVccCodingTranslationA2B | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.13 | ColumncirEmAtmPvcVccVoiceCompressionB2A | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.6.1.14 | ColumncirEmAtmPvcVccSilenceDetectionB2A | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.6.1.15 | ColumncirEmAtmPvcVccEchoCancellationB2A | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.6.1.16 | ColumncirEmAtmPvcVccCngToneDetectionB2A | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is … |
| 1.3.6.1.4.1.1751.2.18.6.6.1.17 | ColumncirEmAtmPvcVccCodingTranslationB2A | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.18 | ColumncirEmAtmPvcVccSarTypeB | read-write | current | This field will only be used when selecting voice compression, in other cases it will be set to aal1. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.19 | ColumncirEmAtmPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.20 | ColumncirEmAtmPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.21 | ColumncirEmAtmPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.22 | ColumncirEmAtmPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.6.1.23 | ColumncirEmAtmPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.24 | ColumncirEmAtmPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.6.1.25 | ColumncirEmAtmPvcVccAal2Cid | read-write | current | Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aa… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.26 | ColumncirEmAtmPvcVccOAMConnEndPtStatus | read-only | current | Connection endpoint status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.27 | ColumncirEmAtmPvcVccOAMConnSegEndPtStatus | read-only | current | Segment endpoint status. Valid only at segment/connection endpoints. |
| 1.3.6.1.4.1.1751.2.18.6.6.1.28 | ColumncirEmAtmPvcVccConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.6.1.29 | ColumncirEmAtmPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.6.1.30 | ColumncirEmAtmPvcVccDigitCollectTypeA2B | read-write | current | |
| 1.3.6.1.4.1.1751.2.18.6.6.1.31 | ColumncirEmAtmPvcVccDigitCollectTypeB2A | read-write | current | |
| 1.3.6.1.4.1.1751.2.18.6.6.1.32 | ColumncirEmAtmPvcVccEncodingStdA2B | read-write | current | These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.33 | ColumncirEmAtmPvcVccEncodingStdB2A | read-write | current | These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.34 | ColumncirEmAtmPvcVccEncodingProfileIdA2B | read-write | current | These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These… |
| 1.3.6.1.4.1.1751.2.18.6.6.1.35 | ColumncirEmAtmPvcVccEncodingProfileIdB2A | read-write | current | These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These… |
| 1.3.6.1.4.1.1751.2.18.6.7 | TablefrAtmPvcVccTable | not-accessible | current | Table of frame relay to ATM IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.7.1 | RowfrAtmPvcVccEntry | not-accessible | current | Row definition of frame relay to ATM IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.7.1.1 | ColumnfrAtmPvcVccIfA | not-accessible | current | Interface index for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wh… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.2 | ColumnfrAtmPvcVccDlciA | not-accessible | current | DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 1023. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.3 | ColumnfrAtmPvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS i… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.4 | ColumnfrAtmPvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.5 | ColumnfrAtmPvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.6 | ColumnfrAtmPvcVccMaxFrameSizeIn | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.7.1.7 | ColumnfrAtmPvcVccBcIn | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.8 | ColumnfrAtmPvcVccBeIn | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.7.1.9 | ColumnfrAtmPvcVccCirIn | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into t… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.10 | ColumnfrAtmPvcVccMaxFrameSizeOut | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this PVC in the egress direction (out of the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.7.1.11 | ColumnfrAtmPvcVccBcOut | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.7.1.12 | ColumnfrAtmPvcVccBeOut | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI) |
| 1.3.6.1.4.1.1751.2.18.6.7.1.13 | ColumnfrAtmPvcVccCirOut | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the egress direction (into th… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.14 | ColumnfrAtmPvcVccServiceType | read-write | current | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.15 | ColumnfrAtmPvcVccFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.7.1.16 | ColumnfrAtmPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.7.1.17 | ColumnfrAtmPvcVccTimeLenIn | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.18 | ColumnfrAtmPvcVccInterWorkingFuncIn | read-write | current | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.19 | ColumnfrAtmPvcVccTimeLenOut | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.20 | ColumnfrAtmPvcVccInterWorkingFuncOut | read-write | current | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.21 | ColumnfrAtmPvcVccPeakCellRateA2B | read-only | current | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.22 | ColumnfrAtmPvcVccSusCellRateA2B | read-only | current | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.23 | ColumnfrAtmPvcVccMaxBurstSizeA2B | read-only | current | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.24 | ColumnfrAtmPvcVccPeakCellRateB2A | read-only | current | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.25 | ColumnfrAtmPvcVccSusCellRateB2A | read-only | current | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.26 | ColumnfrAtmPvcVccMaxBurstSizeB2A | read-only | current | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.27 | ColumnfrAtmPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.28 | ColumnfrAtmPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.29 | ColumnfrAtmPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.30 | ColumnfrAtmPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.7.1.31 | ColumnfrAtmPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.32 | ColumnfrAtmPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.7.1.33 | ColumnfrAtmPvcVccOAMConnEndPtStatus | read-only | current | Connection endpoint status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.34 | ColumnfrAtmPvcVccOAMSegEndPtStatus | read-only | current | Segment endpoint status. Valid only at segment/connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.35 | ColumnfrAtmPvcVccMfsB2A | read-write | current | Maximum Frame Size for GFR traffic |
| 1.3.6.1.4.1.1751.2.18.6.7.1.36 | ColumnfrAtmPvcVccConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.7.1.37 | ColumnfrAtmPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.7.1.38 | ColumnfrAtmPvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.8 | TablefrFrPvcTable | not-accessible | current | Table of frame relay to frame relay connections |
| 1.3.6.1.4.1.1751.2.18.6.8.1 | RowfrFrPvcEntry | not-accessible | current | Row definition of frame relay to frame relay PVC connections |
| 1.3.6.1.4.1.1751.2.18.6.8.1.1 | ColumnfrFrPvcIfA | not-accessible | current | Interface index for side A of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card … |
| 1.3.6.1.4.1.1751.2.18.6.8.1.2 | ColumnfrFrPvcDlciA | not-accessible | current | DLCI value for side A of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.3 | ColumnfrFrPvcIfB | not-accessible | current | Interface index for side B of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card … |
| 1.3.6.1.4.1.1751.2.18.6.8.1.4 | ColumnfrFrPvcDlciB | not-accessible | current | DLCI value for side B of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.5 | ColumnfrFrPvcMaxFrameSizeA2B | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this PVC in the A to B direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.6 | ColumnfrFrPvcBcA2B | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the A to B direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.7 | ColumnfrFrPvcBeA2B | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the A to B direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.8 | ColumnfrFrPvcCirA2B | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the A to B direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.9 | ColumnfrFrPvcMaxFrameSizeB2A | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this PVC in the B to A direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.10 | ColumnfrFrPvcBcB2A | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the B to A direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.11 | ColumnfrFrPvcBeB2A | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the B to A direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.12 | ColumnfrFrPvcCirB2A | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the B to A direction. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.13 | ColumnfrFrPvcServiceType | read-write | current | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.14 | ColumnfrFrPvcFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.8.1.15 | ColumnfrFrPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.8.1.16 | ColumnfrFrPvcTimeLenA2B | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.17 | ColumnfrFrPvcInterWorkingFuncA2B | read-write | current | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.18 | ColumnfrFrPvcTimeLenB2A | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.19 | ColumnfrFrPvcInterWorkingFuncB2A | read-write | current | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.20 | ColumnfrFrPvcPeakCellRateA2B | read-only | current | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.21 | ColumnfrFrPvcSusCellRateA2B | read-only | current | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.22 | ColumnfrFrPvcMaxBurstSizeA2B | read-only | current | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.23 | ColumnfrFrPvcPeakCellRateB2A | read-only | current | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.24 | ColumnfrFrPvcSusCellRateB2A | read-only | current | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.25 | ColumnfrFrPvcMaxBurstSizeB2A | read-only | current | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.8.1.26 | ColumnfrFrPvcConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.8.1.27 | ColumnfrFrPvcConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.8.1.28 | ColumnfrFrPvcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.9 | TablevbrAtmPvcVccTable | not-accessible | current | Table of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.9.1 | RowvbrAtmPvcVccEntry | not-accessible | current | Row definition of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.9.1.1 | ColumnvbrAtmPvcVccIfA | not-accessible | current | Interface index for side A, the variable bit rate side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form,… |
| 1.3.6.1.4.1.1751.2.18.6.9.1.2 | ColumnvbrAtmPvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.9.1.3 | ColumnvbrAtmPvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.4 | ColumnvbrAtmPvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.5 | ColumnvbrAtmPvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.9.1.6 | ColumnvbrAtmPvcVccPeakCellRateA2B | read-write | current | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.9.1.7 | ColumnvbrAtmPvcVccSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.9.1.8 | ColumnvbrAtmPvcVccMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.9.1.9 | ColumnvbrAtmPvcVccPeakCellRateB2A | read-write | current | peak rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.10 | ColumnvbrAtmPvcVccSusCellRateB2A | read-write | current | sustained rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.11 | ColumnvbrAtmPvcVccMaxBurstSizeB2A | read-write | current | maximum burst size - side B, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.12 | ColumnvbrAtmPvcVccFlow | read-write | current | Flow type |
| 1.3.6.1.4.1.1751.2.18.6.9.1.13 | ColumnvbrAtmPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.9.1.14 | ColumnvbrAtmPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.9.1.15 | ColumnvbrAtmPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.16 | ColumnvbrAtmPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will… |
| 1.3.6.1.4.1.1751.2.18.6.9.1.17 | ColumnvbrAtmPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.9.1.18 | ColumnvbrAtmPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.9.1.19 | ColumnvbrAtmPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.9.1.20 | ColumnvbrAtmPvcVccOAMConnEndPtStatus | read-only | current | Connection endpoint status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.21 | ColumnvbrAtmPvcVccOAMSegEndPtStatus | read-only | current | Segment endpoint status. Valid only at segment/connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.22 | ColumnvbrAtmPvcVccMfsB2A | read-write | current | Maximum Frame Size for GFR traffic |
| 1.3.6.1.4.1.1751.2.18.6.9.1.23 | ColumnvbrAtmPvcVccConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.9.1.24 | ColumnvbrAtmPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.9.1.25 | ColumnvbrAtmPvcVccSarTypeB | read-write | current | This field will be used to connect hdlc to atm directly when sar type is none or aal5 or go through dsp2 first when sar type is aal2Std. |
| 1.3.6.1.4.1.1751.2.18.6.9.1.26 | ColumnvbrAtmPvcVccAal2Cid | read-write | current | Aal2 Cid Used to pack hdlc chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard … |
| 1.3.6.1.4.1.1751.2.18.6.9.1.27 | ColumnvbrAtmPvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.10 | TablecirEmCirEmPvcTable | not-accessible | current | Table of Circuit Emulation to Circuit Emulation |
| 1.3.6.1.4.1.1751.2.18.6.10.1 | RowcirEmCirEmPvcEntry | not-accessible | current | Row definition of circuit emulation to circuit emulation connections. |
| 1.3.6.1.4.1.1751.2.18.6.10.1.1 | ColumncirEmCirEmPvcIfA | not-accessible | current | Interface index for side A of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS … |
| 1.3.6.1.4.1.1751.2.18.6.10.1.2 | ColumncirEmCirEmPvcIfB | not-accessible | current | Interface index for side B of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS … |
| 1.3.6.1.4.1.1751.2.18.6.10.1.5 | ColumncirEmCirEmPvcEchoCancellationA2B | read-write | current | Echo cancellation off/on |
| 1.3.6.1.4.1.1751.2.18.6.10.1.6 | ColumncirEmCirEmPvcFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.10.1.7 | ColumncirEmCirEmPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.10.1.8 | ColumncirEmCirEmPvcCodingTranslationA2B | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.10.1.9 | ColumncirEmCirEmPvcEchoCancellationB2A | read-write | current | Echo cancellation off/on |
| 1.3.6.1.4.1.1751.2.18.6.10.1.10 | ColumncirEmCirEmPvcCodingTranslationB2A | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.10.1.11 | ColumncirEmCirEmPvcConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.10.1.12 | ColumncirEmCirEmPvcInterworking | read-write | current | CE - CE interworking enable/disabled |
| 1.3.6.1.4.1.1751.2.18.6.10.1.13 | ColumncirEmCirEmPvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.10.1.14 | ColumncirEmCirEmPvcConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.10.1.15 | ColumncirEmCirEmPvcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.11 | TablevbrVbrPvcTable | not-accessible | current | Table of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.11.1 | RowvbrVbrPvcEntry | not-accessible | current | Row definition of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.11.1.1 | ColumnvbrVbrPvcIfA | not-accessible | current | Interface index for side A of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS … |
| 1.3.6.1.4.1.1751.2.18.6.11.1.2 | ColumnvbrVbrPvcIfB | not-accessible | current | Interface index for side B of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS … |
| 1.3.6.1.4.1.1751.2.18.6.11.1.3 | ColumnvbrVbrPvcPeakCellRateA2B | read-write | current | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.11.1.4 | ColumnvbrVbrPvcSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.11.1.5 | ColumnvbrVbrPvcMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.11.1.6 | ColumnvbrVbrPvcPeakCellRateB2A | read-write | current | peak rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.11.1.7 | ColumnvbrVbrPvcSusCellRateB2A | read-write | current | sustained rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.11.1.8 | ColumnvbrVbrPvcMaxBurstSizeB2A | read-write | current | maximum burst size - side B, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.11.1.9 | ColumnvbrVbrPvcFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.11.1.10 | ColumnvbrVbrPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.11.1.11 | ColumnvbrVbrPvcConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.11.1.12 | ColumnvbrVbrPvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.11.1.13 | ColumnvbrVbrPvcConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.11.1.14 | ColumnvbrVbrPvcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.12 | TablebridgeBridgePvcTable | not-accessible | current | A table of bridge-bridge PVC connection |
| 1.3.6.1.4.1.1751.2.18.6.12.1 | RowbridgeBridgePvcEntry | not-accessible | current | Row definitions of bridge-bridge PVC connection attributes |
| 1.3.6.1.4.1.1751.2.18.6.12.1.1 | ColumnbridgeBridgePvcIfA | not-accessible | current | Interface index for side A of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP i… |
| 1.3.6.1.4.1.1751.2.18.6.12.1.2 | ColumnbridgeBridgePvcIfB | not-accessible | current | Interface index for side B of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP i… |
| 1.3.6.1.4.1.1751.2.18.6.12.1.3 | ColumnbridgeBridgePvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.12.1.4 | ColumnbridgeBridgePvcConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.12.1.5 | ColumnbridgeBridgePvcConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.12.1.6 | ColumnbridgeBridgePvcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.13 | TablebridgeAtmPvcVccTable | not-accessible | current | Table of bridge Atm PVC VCC connection entries |
| 1.3.6.1.4.1.1751.2.18.6.13.1 | RowbridgeAtmPvcVccEntry | not-accessible | current | Row definition of bridge atm PVC VCC connection attribution. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.1 | ColumnbridgeAtmPvcVccIfA | not-accessible | current | Interface index for side A, the bridge side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is … |
| 1.3.6.1.4.1.1751.2.18.6.13.1.2 | ColumnbridgeAtmPvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the… |
| 1.3.6.1.4.1.1751.2.18.6.13.1.3 | ColumnbridgeAtmPvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.4 | ColumnbridgeAtmPvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.5 | ColumnbridgeAtmPvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.13.1.6 | ColumnbridgeAtmPvcVccPeakCellRateB2A | read-write | current | peak rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.7 | ColumnbridgeAtmPvcVccSusCellRateB2A | read-write | current | sustained rate - side B, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.8 | ColumnbridgeAtmPvcVccMaxBurstSizeB2A | read-write | current | maximum burst size - side B, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.9 | ColumnbridgeAtmPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.13.1.10 | ColumnbridgeAtmPvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.13.1.11 | ColumnbridgeAtmPvcVccDualHomed | read-only | current | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.13.1.12 | ColumnbridgeAtmPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.13.1.14 | ColumnbridgeAtmPvcVccCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.13.1.15 | ColumnbridgeAtmPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.13.1.16 | ColumnbridgeAtmPvcVccMfsB2A | read-write | current | Maximum Frame Size for GFR traffic |
| 1.3.6.1.4.1.1751.2.18.6.13.1.17 | ColumnbridgeAtmPvcVccConnFailureCauseA | read-only | current | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.13.1.18 | ColumnbridgeAtmPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.13.1.19 | ColumnbridgeAtmPvcVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore End-Seg… |
| 1.3.6.1.4.1.1751.2.18.6.13.1.20 | ColumnbridgeAtmPvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.14 | TablecirEmAtmBkPvcVccTable | not-accessible | current | This table is used to manage CES DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.14.1 | RowcirEmAtmBkPvcVccEntry | not-accessible | current | An entry in the CES DHPVC table. There is one entry in the table corresponding to each active row in the cirEmAtmPvcVccTable for which the cirEmAtmPvcVccDualHo… |
| 1.3.6.1.4.1.1751.2.18.6.14.1.1 | ColumncirEmAtmBkPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPP… |
| 1.3.6.1.4.1.1751.2.18.6.14.1.2 | ColumncirEmAtmBkPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.14.1.3 | ColumncirEmAtmBkPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.14.1.4 | ColumncirEmAtmBkPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.14.1.5 | ColumncirEmAtmBkPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.14.1.6 | ColumncirEmAtmBkPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.14.1.7 | ColumncirEmAtmBkPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.14.1.8 | ColumncirEmAtmBkPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.14.1.9 | ColumncirEmAtmBkPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.15 | TablevbrAtmBkPvcVccTable | not-accessible | current | This table is used to manage terminal emulation DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.15.1 | RowvbrAtmBkPvcVccEntry | not-accessible | current | An entry in the terminal emulation DHPVC table. There is one entry in the table corresponding to each active row in the vbrAtmPvcVccTable for which the vbrAtmP… |
| 1.3.6.1.4.1.1751.2.18.6.15.1.1 | ColumnvbrAtmBkPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSP… |
| 1.3.6.1.4.1.1751.2.18.6.15.1.2 | ColumnvbrAtmBkPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.15.1.3 | ColumnvbrAtmBkPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.15.1.4 | ColumnvbrAtmBkPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.15.1.5 | ColumnvbrAtmBkPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.15.1.6 | ColumnvbrAtmBkPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.15.1.7 | ColumnvbrAtmBkPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.15.1.8 | ColumnvbrAtmBkPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.15.1.9 | ColumnvbrAtmBkPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.16 | TableatmSpvcVccAddrTable | not-accessible | current | Table of SPVC ATM network interface addresses. |
| 1.3.6.1.4.1.1751.2.18.6.16.1 | RowatmSpvcVccAddrEntry | not-accessible | current | Row definition of ATM SPVC address table. |
| 1.3.6.1.4.1.1751.2.18.6.16.1.1 | ColumnatmSpvcVccIfA | not-accessible | current | Interface index for side A of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is th… |
| 1.3.6.1.4.1.1751.2.18.6.16.1.2 | ColumnatmSpvcVccAtmPortAddr | read-write | current | Local ATM port NSAP address. |
| 1.3.6.1.4.1.1751.2.18.6.16.1.3 | ColumnatmSpvcVccAddrRowStatus | read-write | current | This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established. |
| 1.3.6.1.4.1.1751.2.18.6.17 | TableatmSpvcVccTable | not-accessible | current | Table of SPVC ATM virtual channel connections. |
| 1.3.6.1.4.1.1751.2.18.6.17.1 | RowatmSpvcVccEntry | not-accessible | current | Row definition of ATM SPVC VCC connections. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.1 | ColumnatmSpvcVccVpiA | not-accessible | current | VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.2 | ColumnatmSpvcVccVciA | not-accessible | current | VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.3 | ColumnatmSpvcVccIfB | read-only | current | Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is th… |
| 1.3.6.1.4.1.1751.2.18.6.17.1.4 | ColumnatmSpvcVccVpiB | read-only | current | VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.5 | ColumnatmSpvcVccVciB | read-only | current | VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.6 | ColumnatmSpvcVccServiceTypeA2B | read-write | current | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.7 | ColumnatmSpvcVccSarTypeA2B | read-write | current | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.8 | ColumnatmSpvcVccPeakCellRateA2B | read-write | current | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.9 | ColumnatmSpvcVccSusCellRateA2B | read-write | current | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.10 | ColumnatmSpvcVccMaxBurstSizeA2B | read-write | current | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.11 | ColumnatmSpvcVccFrwdErrCorrectionA2B | read-write | current | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.12 | ColumnatmSpvcVccServiceTypeB2A | read-write | current | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.13 | ColumnatmSpvcVccSarTypeB2A | read-write | current | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.14 | ColumnatmSpvcVccPeakCellRateB2A | read-write | current | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.15 | ColumnatmSpvcVccSusCellRateB2A | read-write | current | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.16 | ColumnatmSpvcVccMaxBurstSizeB2A | read-write | current | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.17 | ColumnatmSpvcVccFrwdErrCorrectionB2A | read-write | current | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.18 | ColumnatmSpvcVccFlow | read-write | current | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.19 | ColumnatmSpvcVccType | read-write | current | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.20 | ColumnatmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.21 | ColumnatmSpvcVccLeafReference | read-only | current | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should… |
| 1.3.6.1.4.1.1751.2.18.6.17.1.22 | ColumnatmSpvcVccOperStatus | read-only | current | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts a… |
| 1.3.6.1.4.1.1751.2.18.6.17.1.23 | ColumnatmSpvcVccRowStatus | read-write | current | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' a… |
| 1.3.6.1.4.1.1751.2.18.6.17.1.24 | ColumnatmSpvcVccViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.17.1.25 | ColumnatmSpvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.17.1.26 | ColumnatmSpvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.17.1.27 | ColumnatmSpvcVccTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.18 | TableatmSpvcVccActiveSvcTable | not-accessible | current | The table used to manage active SVCs established across ATM networks between ATM entities. |
| 1.3.6.1.4.1.1751.2.18.6.18.1 | RowatmSpvcVccActiveSvcEntry | not-accessible | current | An entry in the ATM active SVC table. There is one entry in the table corresponding to each active row in the atm SPVC VCC Table for which the atmSpvcVccConnTy… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.1 | ColumnatmSpvcVccRemoteAtmPortAddr | read-write | current | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.2 | ColumnatmSpvcVccRemoteSelectType | read-write | current | Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.3 | ColumnatmSpvcVccRemoteVpi | read-write | current | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmSpvcVccRemoteSelectType is configured … |
| 1.3.6.1.4.1.1751.2.18.6.18.1.4 | ColumnatmSpvcVccRemoteVci | read-write | current | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmSpvcVccRemoteSelectType is configured… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.5 | ColumnatmSpvcVccRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retry will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.6 | ColumnatmSpvcVccRetryLimit | read-write | current | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.7 | ColumnatmSpvcVccRestart | read-write | current | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.8 | ColumnatmSpvcVccRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.9 | ColumnatmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.10 | ColumnatmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.19 | TablecirEmAtmSpvcVccTable | not-accessible | current | Table of Circuit Emulation to ATM Soft PVCs. |
| 1.3.6.1.4.1.1751.2.18.6.19.1 | RowcirEmAtmSpvcVccEntry | not-accessible | current | Row definition of circuit emulation to ATM SPVC connections. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.1 | ColumncirEmAtmSpvcVccIfA | not-accessible | current | Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form… |
| 1.3.6.1.4.1.1751.2.18.6.19.1.2 | ColumncirEmAtmSpvcVccIfB | read-only | current | Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.6.19.1.3 | ColumncirEmAtmSpvcVccVpiB | read-only | current | VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.4 | ColumncirEmAtmSpvcVccVciB | read-only | current | VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.5 | ColumncirEmAtmSpvcVccVoiceCompressionA2B | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.19.1.6 | ColumncirEmAtmSpvcVccSilenceDetectionA2B | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.19.1.7 | ColumncirEmAtmSpvcVccEchoCancellationA2B | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.19.1.8 | ColumncirEmAtmSpvcVccCngToneDetectionA2B | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM |
| 1.3.6.1.4.1.1751.2.18.6.19.1.9 | ColumncirEmAtmSpvcVccCodingTranslationA2B | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.10 | ColumncirEmAtmSpvcVccVoiceCompressionB2A | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.19.1.11 | ColumncirEmAtmSpvcVccSilenceDetectionB2A | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.19.1.12 | ColumncirEmAtmSpvcVccEchoCancellationB2A | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.19.1.13 | ColumncirEmAtmSpvcVccCngToneDetectionB2A | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM |
| 1.3.6.1.4.1.1751.2.18.6.19.1.14 | ColumncirEmAtmSpvcVccCodingTranslationB2A | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.15 | ColumncirEmAtmSpvcVccFlow | read-write | current | Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. |
| 1.3.6.1.4.1.1751.2.18.6.19.1.16 | ColumncirEmAtmSpvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.19.1.17 | ColumncirEmAtmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.19.1.18 | ColumncirEmAtmSpvcVccCePortAddr | read-write | current | local CES port nsap address |
| 1.3.6.1.4.1.1751.2.18.6.19.1.19 | ColumncirEmAtmSpvcVccOperStatus | read-only | current | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is cu… |
| 1.3.6.1.4.1.1751.2.18.6.19.1.20 | ColumncirEmAtmSpvcVccRowStatus | read-write | current | Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' … |
| 1.3.6.1.4.1.1751.2.18.6.19.1.21 | ColumncirEmAtmSpvcVccViB | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.20 | TablecirEmAtmSpvcVccActiveSvcTable | not-accessible | current | The table used to manage active SVCs established across ATM networks between CES entities. |
| 1.3.6.1.4.1.1751.2.18.6.20.1 | RowcirEmAtmSpvcVccActiveSvcEntry | not-accessible | current | An entry in the CES active SVC table. There is one entry in the table corresponding to each active row in the cirEmAtmSpvcVccRowStatus for which the cirEmAtmSp… |
| 1.3.6.1.4.1.1751.2.18.6.20.1.1 | ColumncirEmAtmSpvcVccRemoteCePortAddr | read-write | current | The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. |
| 1.3.6.1.4.1.1751.2.18.6.20.1.2 | ColumncirEmAtmSpvcVccRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.20.1.3 | ColumncirEmAtmSpvcVccRetryLimit | read-write | current | A maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.20.1.4 | ColumncirEmAtmSpvcVccRestart | read-write | current | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.20.1.5 | ColumncirEmAtmSpvcVccRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.20.1.6 | ColumncirEmAtmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.20.1.7 | ColumncirEmAtmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.21 | TablevbrAtmSpvcVccTable | not-accessible | current | Table of SPVC atm virtual channel connections |
| 1.3.6.1.4.1.1751.2.18.6.21.1 | RowvbrAtmSpvcVccEntry | not-accessible | current | Row definition of atm SPVC VCC connections |
| 1.3.6.1.4.1.1751.2.18.6.21.1.1 | ColumnvbrAtmSpvcVccIfA | not-accessible | current | Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form… |
| 1.3.6.1.4.1.1751.2.18.6.21.1.2 | ColumnvbrAtmSpvcVccIfB | read-only | current | Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.6.21.1.3 | ColumnvbrAtmSpvcVccVpiB | read-only | current | VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.21.1.4 | ColumnvbrAtmSpvcVccVciB | read-only | current | VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.21.1.5 | ColumnvbrAtmSpvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.21.1.6 | ColumnvbrAtmSpvcVccPeakCellRateA2B | read-write | current | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.21.1.7 | ColumnvbrAtmSpvcVccSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.21.1.8 | ColumnvbrAtmSpvcVccMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.21.1.9 | ColumnvbrAtmSpvcVccPeakCellRateB2A | read-write | current | peak rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.21.1.10 | ColumnvbrAtmSpvcVccSusCellRateB2A | read-write | current | sustained rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.21.1.11 | ColumnvbrAtmSpvcVccMaxBurstSizeB2A | read-write | current | maximum burst size - side B, ATM trunk, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.21.1.12 | ColumnvbrAtmSpvcVccFlow | read-write | current | type of flow |
| 1.3.6.1.4.1.1751.2.18.6.21.1.13 | ColumnvbrAtmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.21.1.14 | ColumnvbrAtmSpvcVccVbrPortAddr | read-write | current | local Vbr port nsap address |
| 1.3.6.1.4.1.1751.2.18.6.21.1.15 | ColumnvbrAtmSpvcVccOperStatus | read-only | current | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is cu… |
| 1.3.6.1.4.1.1751.2.18.6.21.1.16 | ColumnvbrAtmSpvcVccRowStatus | read-write | current | Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' … |
| 1.3.6.1.4.1.1751.2.18.6.21.1.17 | ColumnvbrAtmSpvcVccViB | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.21.1.18 | ColumnvbrAtmSpvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.22 | TablevbrAtmSpvcVccActiveSvcTable | not-accessible | current | The table used to manage active SVCs established across ATM networks between ATM entities. |
| 1.3.6.1.4.1.1751.2.18.6.22.1 | RowvbrAtmSpvcVccActiveSvcEntry | not-accessible | current | An entry in the Terminal Emulation ATM active SVC table. There is one entry in the table corresponding to each active row in the vbrAtmSpvcVccTable for which t… |
| 1.3.6.1.4.1.1751.2.18.6.22.1.1 | ColumnvbrAtmSpvcVccRemoteVbrPortAddr | read-write | current | remote VBR port nsap address implemening IWF, not meaningful if passive type of connection |
| 1.3.6.1.4.1.1751.2.18.6.22.1.2 | ColumnvbrAtmSpvcVccRetryInterval | read-write | current | the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.22.1.3 | ColumnvbrAtmSpvcVccRetryLimit | read-write | current | a maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.22.1.4 | ColumnvbrAtmSpvcVccRestart | read-write | current | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.22.1.5 | ColumnvbrAtmSpvcVccRetryFailure | read-only | current | indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.22.1.6 | ColumnvbrAtmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.22.1.7 | ColumnvbrAtmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.23 | TableatmSpvcVccRlsTable | not-accessible | current | This table is an extension of atmSpvcVccTable and is used to release a ATM-ATM SPVC connection without deleting the configured data. |
| 1.3.6.1.4.1.1751.2.18.6.23.1 | RowatmSpvcVccRlsEntry | not-accessible | current | Row definition of CES SPVC release table. This entry is created whenever an entry is created in atmSpvcVccTable. |
| 1.3.6.1.4.1.1751.2.18.6.23.1.1 | ColumnatmSpvcVccRelease | read-write | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.24 | TablecirEmAtmSpvcVccRlsTable | not-accessible | current | This table is an extension of cirEmAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data. |
| 1.3.6.1.4.1.1751.2.18.6.24.1 | RowcirEmAtmSpvcVccRlsEntry | not-accessible | current | Row definition of CES SPVC release table. This entry is created whenever an entry is created in cirEmAtmSpvcVccTable. |
| 1.3.6.1.4.1.1751.2.18.6.24.1.1 | ColumncirEmAtmSpvcVccRelease | read-write | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.25 | TablevbrAtmSpvcVccRlsTable | not-accessible | current | This table is an extension of vbrAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data. |
| 1.3.6.1.4.1.1751.2.18.6.25.1 | RowvbrAtmSpvcVccRlsEntry | not-accessible | current | Row definition of TE SPVC release table. This entry is created whenever an entry is created in vbrAtmSpvcVccTable. |
| 1.3.6.1.4.1.1751.2.18.6.25.1.1 | ColumnvbrAtmSpvcVccRelease | read-write | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.26 | TablefrAtmBkPvcVccTable | not-accessible | current | This table is used to manage frame relay DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.26.1 | RowfrAtmBkPvcVccEntry | not-accessible | current | An entry in the frame relay DHPVC table. There is one entry in the table corresponding to each active row in the frAtmPvcVccTable for which the frAtmPvcVccDual… |
| 1.3.6.1.4.1.1751.2.18.6.26.1.1 | ColumnfrAtmBkPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, w… |
| 1.3.6.1.4.1.1751.2.18.6.26.1.2 | ColumnfrAtmBkPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.26.1.3 | ColumnfrAtmBkPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.26.1.4 | ColumnfrAtmBkPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.26.1.5 | ColumnfrAtmBkPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.26.1.6 | ColumnfrAtmBkPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.26.1.7 | ColumnfrAtmBkPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.26.1.8 | ColumnfrAtmBkPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.26.1.9 | ColumnfrAtmBkPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.27 | TableatmBkPvcVccTable | not-accessible | current | This table is used to manage ATM to ATM DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.27.1 | RowatmBkPvcVccEntry | not-accessible | current | An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVccTable for which the atmPvcVccDualHomed… |
| 1.3.6.1.4.1.1751.2.18.6.27.1.1 | ColumnatmBkPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where … |
| 1.3.6.1.4.1.1751.2.18.6.27.1.2 | ColumnatmBkPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.27.1.3 | ColumnatmBkPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.27.1.4 | ColumnatmBkPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.27.1.5 | ColumnatmBkPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.27.1.6 | ColumnatmBkPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.27.1.7 | ColumnatmBkPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.27.1.8 | ColumnatmBkPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.27.1.9 | ColumnatmBkPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.28 | TableatmBkPvcVpcTable | not-accessible | current | This table is used to manage ATM to ATM DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.28.1 | RowatmBkPvcVpcEntry | not-accessible | current | An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVpcTable for which the atmPvcVpcDualHomed… |
| 1.3.6.1.4.1.1751.2.18.6.28.1.1 | ColumnatmBkPvcVpcIfB | read-write | current | Interface index for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the … |
| 1.3.6.1.4.1.1751.2.18.6.28.1.2 | ColumnatmBkPvcVpcVpiB | read-write | current | VPI value for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.28.1.3 | ColumnatmBkPvcVpcActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.28.1.4 | ColumnatmBkPvcVpcAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.28.1.5 | ColumnatmBkPvcVpcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.28.1.6 | ColumnatmBkPvcVpcViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.28.1.7 | ColumnatmBkPvcVpcVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.28.1.8 | ColumnatmBkPvcVpcConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.29 | TablebridgeAtmBkPvcVccTable | not-accessible | current | This table is used to manage bridge to atm DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.29.1 | RowbridgeAtmBkPvcVccEntry | not-accessible | current | An entry in the bridge to atm DHPVC table. There is one entry in the table corresponding to each active row in the bridgeAtmPvcVccTable for which the bridgeAtm… |
| 1.3.6.1.4.1.1751.2.18.6.29.1.1 | ColumnbridgeAtmBkPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where … |
| 1.3.6.1.4.1.1751.2.18.6.29.1.2 | ColumnbridgeAtmBkPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.29.1.3 | ColumnbridgeAtmBkPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.29.1.4 | ColumnbridgeAtmBkPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.29.1.5 | ColumnbridgeAtmBkPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.29.1.6 | ColumnbridgeAtmBkPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.29.1.7 | ColumnbridgeAtmBkPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.29.1.8 | ColumnbridgeAtmBkPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.29.1.9 | ColumnbridgeAtmBkPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.30 | TableipAtmBkAppPvcVccTable | not-accessible | current | This table is used to manage in-band management to atm DHPVC backup pvc. |
| 1.3.6.1.4.1.1751.2.18.6.30.1 | RowipAtmBkAppPvcVccEntry | not-accessible | current | An entry in the in-band management to atm DHPVC table. There is one entry in the table corresponding to each active row in the ipAtmAppPvcVccTable for which th… |
| 1.3.6.1.4.1.1751.2.18.6.30.1.1 | ColumnipAtmBkAppPvcVccIfB | read-write | current | Interface index for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSP… |
| 1.3.6.1.4.1.1751.2.18.6.30.1.2 | ColumnipAtmBkAppPvcVccVpiB | read-write | current | VPI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.30.1.3 | ColumnipAtmBkAppPvcVccVciB | read-write | current | VCI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.30.1.4 | ColumnipAtmBkAppPvcVccActivePvc | read-only | current | Current active PVC. |
| 1.3.6.1.4.1.1751.2.18.6.30.1.5 | ColumnipAtmBkAppPvcVccAutoSwitch | read-write | current | Auto switch back to primary link when primary link is recovered. |
| 1.3.6.1.4.1.1751.2.18.6.30.1.6 | ColumnipAtmBkAppPvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.30.1.7 | ColumnipAtmBkAppPvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.30.1.8 | ColumnipAtmBkAppPvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.30.1.9 | ColumnipAtmBkAppPvcVccConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.31 | TablespvcAddrTable | not-accessible | current | Table of SPVC network interface addresses. |
| 1.3.6.1.4.1.1751.2.18.6.31.1 | RowspvcAddrEntry | not-accessible | current | Row definition of SPVC address table. |
| 1.3.6.1.4.1.1751.2.18.6.31.1.1 | ColumnspvcAddrIfA | not-accessible | current | Interface index for side A of an SPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port n… |
| 1.3.6.1.4.1.1751.2.18.6.31.1.2 | ColumnspvcAddrLocalPortAddr | read-write | current | Local port NSAP address. |
| 1.3.6.1.4.1.1751.2.18.6.31.1.3 | ColumnspvcAddrRowStatus | read-write | current | This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established. |
| 1.3.6.1.4.1.1751.2.18.6.32 | TablefrAtmSpvcVccTable | not-accessible | current | Table of frame relay to ATM IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.32.1 | RowfrAtmSpvcVccEntry | not-accessible | current | Row definition of frame relay to ATM IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.32.1.1 | ColumnfrAtmSpvcVccDlciA | not-accessible | current | DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 1023. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.2 | ColumnfrAtmSpvcVccIfB | read-only | current | Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS … |
| 1.3.6.1.4.1.1751.2.18.6.32.1.3 | ColumnfrAtmSpvcVccVpiB | read-only | current | VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.4 | ColumnfrAtmSpvcVccVciB | read-only | current | VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.5 | ColumnfrAtmSpvcVccMaxFrameSizeIn | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.32.1.6 | ColumnfrAtmSpvcVccBcIn | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UN… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.7 | ColumnfrAtmSpvcVccBeIn | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.32.1.8 | ColumnfrAtmSpvcVccCirIn | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the ingress direction (into … |
| 1.3.6.1.4.1.1751.2.18.6.32.1.9 | ColumnfrAtmSpvcVccMaxFrameSizeOut | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction (out of the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.6.32.1.10 | ColumnfrAtmSpvcVccBcOut | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.11 | ColumnfrAtmSpvcVccBeOut | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.12 | ColumnfrAtmSpvcVccCirOut | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the egress direction (into t… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.13 | ColumnfrAtmSpvcVccServiceType | read-write | current | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.14 | ColumnfrAtmSpvcVccFlow | read-write | current | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.32.1.15 | ColumnfrAtmSpvcVccTimeLenIn | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.16 | ColumnfrAtmSpvcVccTimeLenOut | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.17 | ColumnfrAtmSpvcVccPeakCellRateA2B | read-only | current | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.18 | ColumnfrAtmSpvcVccSusCellRateA2B | read-only | current | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.19 | ColumnfrAtmSpvcVccMaxBurstSizeA2B | read-only | current | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.20 | ColumnfrAtmSpvcVccPeakCellRateB2A | read-only | current | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.21 | ColumnfrAtmSpvcVccSusCellRateB2A | read-only | current | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.22 | ColumnfrAtmSpvcVccMaxBurstSizeB2A | read-only | current | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.23 | ColumnfrAtmSpvcVccInterWorkingFunc | read-write | current | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.24 | ColumnfrAtmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.32.1.25 | ColumnfrAtmSpvcVccOperStatus | read-only | current | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is cu… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.26 | ColumnfrAtmSpvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.32.1.27 | ColumnfrAtmSpvcVccRemoteFrPortAddr | read-write | current | The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.28 | ColumnfrAtmSpvcVccRemoteSelectType | read-write | current | Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the DLCI/VPI/VCI value… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.29 | ColumnfrAtmSpvcVccRemoteDlci | read-write | current | DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configur… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.30 | ColumnfrAtmSpvcVccRemoteVpi | read-write | current | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configure… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.31 | ColumnfrAtmSpvcVccRemoteVci | read-write | current | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpvcVccRemoteSelectType is configur… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.32 | ColumnfrAtmSpvcVccRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.33 | ColumnfrAtmSpvcVccRetryLimit | read-write | current | A maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.34 | ColumnfrAtmSpvcVccRestart | read-write | current | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.32.1.35 | ColumnfrAtmSpvcVccRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.36 | ColumnfrAtmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.37 | ColumnfrAtmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.38 | ColumnfrAtmSpvcVccRelease | read-write | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.39 | ColumnfrAtmSpvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.40 | ColumnfrAtmSpvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.41 | ColumnfrAtmSpvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.42 | ColumnfrAtmSpvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.43 | ColumnfrAtmSpvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.44 | ColumnfrAtmSpvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.45 | ColumnfrAtmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.46 | ColumnfrAtmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.47 | ColumnfrAtmSpvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.32.1.48 | ColumnfrAtmSpvcVccStatsFramesDroppedA | read-only | current | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.49 | ColumnfrAtmSpvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.50 | ColumnfrAtmSpvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.51 | ColumnfrAtmSpvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.52 | ColumnfrAtmSpvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.53 | ColumnfrAtmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.54 | ColumnfrAtmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.55 | ColumnfrAtmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.56 | ColumnfrAtmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.57 | ColumnfrAtmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.58 | ColumnfrAtmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.59 | ColumnfrAtmSpvcVccStatsAal5ErrFramesA | read-only | current | Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.60 | ColumnfrAtmSpvcVccStatsFramesTaggedA | read-only | current | Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.61 | ColumnfrAtmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.62 | ColumnfrAtmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.63 | ColumnfrAtmSpvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.32.1.64 | ColumnfrAtmSpvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.65 | ColumnfrAtmSpvcVccPriority | read-write | current | Priority of SPVC - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.6.33 | TableatmAtmSpvcVccTable | not-accessible | current | Table of SPVC ATM virtual channel connections. |
| 1.3.6.1.4.1.1751.2.18.6.33.1 | RowatmAtmSpvcVccEntry | not-accessible | current | Row definition of ATM SPVC VCC connections. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.1 | ColumnatmAtmSpvcVccVpiA | not-accessible | current | VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.2 | ColumnatmAtmSpvcVccVciA | not-accessible | current | VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.3 | ColumnatmAtmSpvcVccRemoteAtmPortAddr | not-accessible | current | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.4 | ColumnatmAtmSpvcVccIfB | read-only | current | Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is th… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.5 | ColumnatmAtmSpvcVccVpiB | read-only | current | VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.6 | ColumnatmAtmSpvcVccVciB | read-only | current | VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.7 | ColumnatmAtmSpvcVccServiceTypeA2B | read-write | current | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.8 | ColumnatmAtmSpvcVccSarTypeA2B | read-write | current | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.9 | ColumnatmAtmSpvcVccPeakCellRateA2B | read-write | current | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.10 | ColumnatmAtmSpvcVccSusCellRateA2B | read-write | current | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.11 | ColumnatmAtmSpvcVccMaxBurstSizeA2B | read-write | current | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.12 | ColumnatmAtmSpvcVccFrwdErrCorrectionA2B | read-write | current | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.13 | ColumnatmAtmSpvcVccServiceTypeB2A | read-write | current | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.14 | ColumnatmAtmSpvcVccSarTypeB2A | read-write | current | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.15 | ColumnatmAtmSpvcVccPeakCellRateB2A | read-write | current | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.16 | ColumnatmAtmSpvcVccSusCellRateB2A | read-write | current | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.17 | ColumnatmAtmSpvcVccMaxBurstSizeB2A | read-write | current | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.18 | ColumnatmAtmSpvcVccFrwdErrCorrectionB2A | read-write | current | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.19 | ColumnatmAtmSpvcVccFlow | read-write | current | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.20 | ColumnatmAtmSpvcVccType | read-write | current | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.21 | ColumnatmAtmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.22 | ColumnatmAtmSpvcVccLeafReference | read-only | current | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.23 | ColumnatmAtmSpvcVccOperStatus | read-only | current | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts a… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.24 | ColumnatmAtmSpvcVccRowStatus | read-write | current | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' a… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.25 | ColumnatmAtmSpvcVccRemoteSelectType | read-write | current | Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.26 | ColumnatmAtmSpvcVccRemoteVpi | read-write | current | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVccRemoteSelectType is configur… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.27 | ColumnatmAtmSpvcVccRemoteVci | read-write | current | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSpvcVccRemoteSelectType is configu… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.28 | ColumnatmAtmSpvcVccRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.29 | ColumnatmAtmSpvcVccRetryLimit | read-write | current | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.30 | ColumnatmAtmSpvcVccRestart | read-write | current | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.31 | ColumnatmAtmSpvcVccRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.32 | ColumnatmAtmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.33 | ColumnatmAtmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.34 | ColumnatmAtmSpvcVccRelease | read-only | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.35 | ColumnatmAtmSpvcVccStatsInCellCountHiA | read-only | current | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.36 | ColumnatmAtmSpvcVccStatsInCellCountLoA | read-only | current | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.37 | ColumnatmAtmSpvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.38 | ColumnatmAtmSpvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.39 | ColumnatmAtmSpvcVccStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.40 | ColumnatmAtmSpvcVccStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.41 | ColumnatmAtmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.42 | ColumnatmAtmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.43 | ColumnatmAtmSpvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.33.1.44 | ColumnatmAtmSpvcVccStatsFrwdErrCrrctnRateA2B | read-only | current | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.45 | ColumnatmAtmSpvcVccStatsFrwdErrCrrctnRateB2A | read-only | current | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.46 | ColumnatmAtmSpvcVccStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.47 | ColumnatmAtmSpvcVccStatsInOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.48 | ColumnatmAtmSpvcVccStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.49 | ColumnatmAtmSpvcVccStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.50 | ColumnatmAtmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.51 | ColumnatmAtmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.52 | ColumnatmAtmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.53 | ColumnatmAtmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.54 | ColumnatmAtmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.55 | ColumnatmAtmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.56 | ColumnatmAtmSpvcVccViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.57 | ColumnatmAtmSpvcVccViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.58 | ColumnatmAtmSpvcVccStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.59 | ColumnatmAtmSpvcVccStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.60 | ColumnatmAtmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.61 | ColumnatmAtmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.62 | ColumnatmAtmSpvcVccVUNIA | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.63 | ColumnatmAtmSpvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.64 | ColumnatmAtmSpvcVccTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.65 | ColumnatmAtmSpvcVccTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.66 | ColumnatmAtmSpvcVccPriority | read-write | current | Priority of SPVC - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.6.34 | TablecirAtmSpvcVccTable | not-accessible | current | Table of Circuit Emulation to ATM Soft PVCs. |
| 1.3.6.1.4.1.1751.2.18.6.34.1 | RowcirAtmSpvcVccEntry | not-accessible | current | Row definition of circuit emulation to ATM SPVC connections. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.1 | ColumncirAtmSpvcVccRemoteCePortAddr | not-accessible | current | The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.2 | ColumncirAtmSpvcVccIfB | read-only | current | Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.6.34.1.3 | ColumncirAtmSpvcVccVpiB | read-only | current | VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.4 | ColumncirAtmSpvcVccVciB | read-only | current | VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.5 | ColumncirAtmSpvcVccVoiceCompressionA2B | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.34.1.6 | ColumncirAtmSpvcVccSilenceDetectionA2B | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.34.1.7 | ColumncirAtmSpvcVccEchoCancellationA2B | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.34.1.8 | ColumncirAtmSpvcVccCngToneDetectionA2B | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM |
| 1.3.6.1.4.1.1751.2.18.6.34.1.9 | ColumncirAtmSpvcVccCodingTranslationA2B | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.10 | ColumncirAtmSpvcVccVoiceCompressionB2A | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.34.1.11 | ColumncirAtmSpvcVccSilenceDetectionB2A | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.34.1.12 | ColumncirAtmSpvcVccEchoCancellationB2A | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.34.1.13 | ColumncirAtmSpvcVccCngToneDetectionB2A | read-write | current | Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM |
| 1.3.6.1.4.1.1751.2.18.6.34.1.14 | ColumncirAtmSpvcVccCodingTranslationB2A | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.15 | ColumncirAtmSpvcVccFlow | read-write | current | Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.16 | ColumncirAtmSpvcVccServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.34.1.17 | ColumncirAtmSpvcVccConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.34.1.18 | ColumncirAtmSpvcVccOperStatus | read-only | current | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is cu… |
| 1.3.6.1.4.1.1751.2.18.6.34.1.19 | ColumncirAtmSpvcVccRowStatus | read-write | current | Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' … |
| 1.3.6.1.4.1.1751.2.18.6.34.1.20 | ColumncirAtmSpvcVccViB | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.34.1.21 | ColumncirAtmSpvcVccRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.22 | ColumncirAtmSpvcVccRetryLimit | read-write | current | A maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.23 | ColumncirAtmSpvcVccRestart | read-write | current | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.34.1.24 | ColumncirAtmSpvcVccRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.25 | ColumncirAtmSpvcVccReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.26 | ColumncirAtmSpvcVccReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.27 | ColumncirAtmSpvcVccRelease | read-only | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.28 | ColumncirAtmSpvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion ) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.29 | ColumncirAtmSpvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A - ( Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.30 | ColumncirAtmSpvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A - ( High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.31 | ColumncirAtmSpvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.32 | ColumncirAtmSpvcVccStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.33 | ColumncirAtmSpvcVccStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.34 | ColumncirAtmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.35 | ColumncirAtmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.36 | ColumncirAtmSpvcVccStatsTimer | read-only | current | Number of seconds since stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.34.1.37 | ColumncirAtmSpvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.38 | ColumncirAtmSpvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.39 | ColumncirAtmSpvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.40 | ColumncirAtmSpvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.41 | ColumncirAtmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.42 | ColumncirAtmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.43 | ColumncirAtmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.44 | ColumncirAtmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.34.1.45 | ColumncirAtmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.46 | ColumncirAtmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.47 | ColumncirAtmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.34.1.48 | ColumncirAtmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.34.1.49 | ColumncirAtmSpvcVccVUNIB | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.34.1.50 | ColumncirAtmSpvcVccSarTypeB | read-write | current | This field will only be used when selecting voice compression, in other cases it will be set to aal1. |
| 1.3.6.1.4.1.1751.2.18.6.34.1.51 | ColumncirAtmSpvcVccPriority | read-write | current | Priority of SPVC - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.6.35 | TablevbrAtmSpvcTable | not-accessible | current | Table of SPVC atm virtual channel connections |
| 1.3.6.1.4.1.1751.2.18.6.35.1 | RowvbrAtmSpvcEntry | not-accessible | current | Row definition of atm SPVC VCC connections |
| 1.3.6.1.4.1.1751.2.18.6.35.1.1 | ColumnvbrAtmSpvcRemoteVbrPortAddr | not-accessible | current | remote VBR port nsap address implemening IWF, not meaningful if passive type of connection |
| 1.3.6.1.4.1.1751.2.18.6.35.1.2 | ColumnvbrAtmSpvcIfB | read-only | current | Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.3 | ColumnvbrAtmSpvcVpiB | read-only | current | VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.4 | ColumnvbrAtmSpvcVciB | read-only | current | VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.5 | ColumnvbrAtmSpvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.1751.2.18.6.35.1.6 | ColumnvbrAtmSpvcPeakCellRateA2B | read-write | current | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.35.1.7 | ColumnvbrAtmSpvcSusCellRateA2B | read-write | current | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.35.1.8 | ColumnvbrAtmSpvcMaxBurstSizeA2B | read-write | current | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.35.1.9 | ColumnvbrAtmSpvcPeakCellRateB2A | read-write | current | peak rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.10 | ColumnvbrAtmSpvcSusCellRateB2A | read-write | current | sustained rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.11 | ColumnvbrAtmSpvcMaxBurstSizeB2A | read-write | current | maximum burst size - side B, ATM trunk, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.12 | ColumnvbrAtmSpvcFlow | read-write | current | type of flow |
| 1.3.6.1.4.1.1751.2.18.6.35.1.13 | ColumnvbrAtmSpvcConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.35.1.14 | ColumnvbrAtmSpvcOperStatus | read-only | current | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is cu… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.15 | ColumnvbrAtmSpvcRowStatus | read-write | current | Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' … |
| 1.3.6.1.4.1.1751.2.18.6.35.1.16 | ColumnvbrAtmSpvcViB | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.35.1.17 | ColumnvbrAtmSpvcRetryInterval | read-write | current | the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.18 | ColumnvbrAtmSpvcRetryLimit | read-write | current | a maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.19 | ColumnvbrAtmSpvcRestart | read-write | current | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.35.1.20 | ColumnvbrAtmSpvcRetryFailure | read-only | current | indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.21 | ColumnvbrAtmSpvcReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.35.1.22 | ColumnvbrAtmSpvcReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.35.1.23 | ColumnvbrAtmSpvcRelease | read-only | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.24 | ColumnvbrAtmSpvcStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.25 | ColumnvbrAtmSpvcStatsCellsEncodedLoA | read-only | current | ells encoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.26 | ColumnvbrAtmSpvcStatsCellsDecodedHiA | read-only | current | Cells decoded on side A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.27 | ColumnvbrAtmSpvcStatsCellsDecodedLoA | read-only | current | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.28 | ColumnvbrAtmSpvcStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.29 | ColumnvbrAtmSpvcStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.30 | ColumnvbrAtmSpvcStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.31 | ColumnvbrAtmSpvcStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.32 | ColumnvbrAtmSpvcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.35.1.33 | ColumnvbrAtmSpvcStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.34 | ColumnvbrAtmSpvcStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.35 | ColumnvbrAtmSpvcStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.36 | ColumnvbrAtmSpvcStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.37 | ColumnvbrAtmSpvcStatsInOdometerCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.38 | ColumnvbrAtmSpvcStatsInOdometerCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.39 | ColumnvbrAtmSpvcStatsOutOdometerCellCountHiB | read-only | current | Valid Cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.40 | ColumnvbrAtmSpvcStatsOutOdometerCellCountLoB | read-only | current | Valid Cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.41 | ColumnvbrAtmSpvcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.42 | ColumnvbrAtmSpvcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.43 | ColumnvbrAtmSpvcStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.35.1.44 | ColumnvbrAtmSpvcStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.35.1.45 | ColumnvbrAtmSpvcVUNIB | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.35.1.46 | ColumnvbrAtmSpvcTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.47 | ColumnvbrAtmSpvcPriority | read-write | current | Priority of SPVC - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.6.36 | Tableaal2TrunkConfigTable | not-accessible | current | Table of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.36.1 | Rowaal2TrunkConfigEntry | not-accessible | current | Row definition of terminal emulation to ATM network IWF connections |
| 1.3.6.1.4.1.1751.2.18.6.36.1.1 | Columnaal2TrunkConfigIf | not-accessible | current | Interface Id of the Atm Side of the Aal2 Trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.2 | Columnaal2TrunkConfigVpi | not-accessible | current | VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.3 | Columnaal2TrunkConfigVci | not-accessible | current | VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.4 | Columnaal2TrunkConfigServiceType | read-write | current | Service/Queue types supported for Aal2 Trunk connections.When using Vbr/Ubr type service type oversubscription will have to be taken into account for which nat… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.5 | Columnaal2TrunkConfigPeakCellRateIgr | read-write | current | peak cell rate - atm side inp, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.36.1.6 | Columnaal2TrunkConfigSusCellRateIgr | read-write | current | sustained rate - atm side inp, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.36.1.7 | Columnaal2TrunkConfigMaxBurstSizeIgr | read-write | current | maximum burst size - atm side inp, in cells |
| 1.3.6.1.4.1.1751.2.18.6.36.1.8 | Columnaal2TrunkConfigPeakCellRateEgr | read-write | current | peak rate - atm side output, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.9 | Columnaal2TrunkConfigSusCellRateEgr | read-write | current | sustained rate - atm side output,in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.10 | Columnaal2TrunkConfigMaxBurstSizeEgr | read-write | current | maximum burst size - atm side output, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.11 | Columnaal2TrunkConfigFlow | read-write | current | Flow type |
| 1.3.6.1.4.1.1751.2.18.6.36.1.12 | Columnaal2TrunkConfigRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.36.1.13 | Columnaal2TrunkConfigConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.14 | Columnaal2TrunkConfigViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.15 | Columnaal2TrunkConfigCnfrmTypeB2A | read-write | current | The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the confor… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.16 | Columnaal2TrunkConfigVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.17 | Columnaal2TrunkAvailBwIgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.18 | Columnaal2TrunkAvailBwEgr | read-only | current | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.19 | Columnaal2TrunkGR303 | read-write | current | This flag is used to check if a GR303 Feature is enabled for the trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.20 | Columnaal2TrunkConfigOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it wi… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.21 | Columnaal2TrunkConnFailureCauseB | read-only | current | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.36.1.22 | Columnaal2TrunkCuTimer | read-write | current | CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of th… |
| 1.3.6.1.4.1.1751.2.18.6.37 | Tablegr303Aal2PvcVccTable | not-accessible | current | Table of Gr303 to AAL2 Cid monitor VCCs |
| 1.3.6.1.4.1.1751.2.18.6.37.1 | Rowgr303Aal2PvcVccEntry | not-accessible | current | Row definition of circuit emulation to atm connections. |
| 1.3.6.1.4.1.1751.2.18.6.37.1.1 | Columngr303Aal2PvcVccGr303IgId | not-accessible | current | GR303 interface group id on the GR303 side of the connection |
| 1.3.6.1.4.1.1751.2.18.6.37.1.2 | Columngr303Aal2PvcVccGr303CallRef | not-accessible | current | The call reference value to be used in the signaling packets on the GR303 interface for the connection on the AAL2CID corresponding to this connection |
| 1.3.6.1.4.1.1751.2.18.6.37.1.3 | Columngr303Aal2PvcVccIfB | not-accessible | current | Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.37.1.4 | Columngr303Aal2PvcVccVpiB | not-accessible | current | VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.37.1.5 | Columngr303Aal2PvcVccVciB | not-accessible | current | VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.37.1.6 | Columngr303Aal2PvcVccAal2Cid | not-accessible | current | Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aa… |
| 1.3.6.1.4.1.1751.2.18.6.37.1.7 | Columngr303Aal2PvcVccRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.6.37.1.8 | Columngr303Aal2PvcVccVoiceEncodingProfile | read-write | current | Profile for use by voice/voiceband data. Profile-3 and Profile-7 are ITU-T predefined profiles which specify the voice compression and silence removal algorith… |
| 1.3.6.1.4.1.1751.2.18.6.37.1.9 | Columngr303Aal2PvcVccVoiceCompression | read-write | current | Voice Compression Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.37.1.10 | Columngr303Aal2PvcVccSilenceDetection | read-write | current | silence detection off/on |
| 1.3.6.1.4.1.1751.2.18.6.37.1.11 | Columngr303Aal2PvcVccEchoCancellation | read-write | current | Echo Cancellation Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.37.1.12 | Columngr303Aal2PvcVccCngToneDetection | read-write | current | Calling Tone Detection Algorithm |
| 1.3.6.1.4.1.1751.2.18.6.37.1.13 | Columngr303Aal2PvcVccCodingTranslation | read-write | current | Coding rule translation type. |
| 1.3.6.1.4.1.1751.2.18.6.37.1.14 | Columngr303Aal2PvcVccConnectionStatus | read-only | current | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of t… |
| 1.3.6.1.4.1.1751.2.18.6.37.1.15 | Columngr303Aal2PvcVccAltLineType | read-write | current | Analog Line Termination Line Type on the subscriber side. The ABCD bit codes for diffterent signal types depend on the analog line type. The analog type can be… |
| 1.3.6.1.4.1.1751.2.18.6.38 | TableatmAtmSpvcVpcTable | not-accessible | current | Table of SPVC ATM virtual path connections. |
| 1.3.6.1.4.1.1751.2.18.6.38.1 | RowatmAtmSpvcVpcEntry | not-accessible | current | Row definition of ATM SPVC VPC connections. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.1 | ColumnatmAtmSpvcVpcVpiA | not-accessible | current | VPI value for side A of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.2 | ColumnatmAtmSpvcVpcRemoteAtmPortAddr | not-accessible | current | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.3 | ColumnatmAtmSpvcVpcIfB | read-only | current | Interface index for side B of an ATM SPVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is th… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.4 | ColumnatmAtmSpvcVpcVpiB | read-only | current | VPI value for side B of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.5 | ColumnatmAtmSpvcVpcServiceTypeA2B | read-write | current | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.6 | ColumnatmAtmSpvcVpcSarTypeA2B | read-write | current | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.7 | ColumnatmAtmSpvcVpcPeakCellRateA2B | read-write | current | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.8 | ColumnatmAtmSpvcVpcSusCellRateA2B | read-write | current | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.9 | ColumnatmAtmSpvcVpcMaxBurstSizeA2B | read-write | current | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.10 | ColumnatmAtmSpvcVpcFrwdErrCorrectionA2B | read-write | current | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.11 | ColumnatmAtmSpvcVpcServiceTypeB2A | read-write | current | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.12 | ColumnatmAtmSpvcVpcSarTypeB2A | read-write | current | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.13 | ColumnatmAtmSpvcVpcPeakCellRateB2A | read-write | current | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.14 | ColumnatmAtmSpvcVpcSusCellRateB2A | read-write | current | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.15 | ColumnatmAtmSpvcVpcMaxBurstSizeB2A | read-write | current | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.16 | ColumnatmAtmSpvcVpcFrwdErrCorrectionB2A | read-write | current | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.17 | ColumnatmAtmSpvcVpcFlow | read-write | current | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.18 | ColumnatmAtmSpvcVpcType | read-write | current | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.19 | ColumnatmAtmSpvcVpcConnType | read-write | current | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.20 | ColumnatmAtmSpvcVpcLeafReference | read-only | current | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.21 | ColumnatmAtmSpvcVpcOperStatus | read-only | current | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts a… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.22 | ColumnatmAtmSpvcVpcRowStatus | read-write | current | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' a… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.23 | ColumnatmAtmSpvcVpcRemoteSelectType | read-write | current | Indicates whether the remote VPI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI values. In such a case,… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.24 | ColumnatmAtmSpvcVpcRemoteVpi | read-write | current | VPI value to be used at the destination of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVpcRemoteSelectType is configur… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.25 | ColumnatmAtmSpvcVpcRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.26 | ColumnatmAtmSpvcVpcRetryLimit | read-write | current | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.27 | ColumnatmAtmSpvcVpcRestart | read-write | current | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.28 | ColumnatmAtmSpvcVpcRetryFailure | read-only | current | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.29 | ColumnatmAtmSpvcVpcReleaseCause | read-only | current | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.30 | ColumnatmAtmSpvcVpcReleaseDiag | read-only | current | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.31 | ColumnatmAtmSpvcVpcRelease | read-only | current | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.32 | ColumnatmAtmSpvcVpcStatsInCellCountHiA | read-only | current | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.33 | ColumnatmAtmSpvcVpcStatsInCellCountLoA | read-only | current | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.34 | ColumnatmAtmSpvcVpcStatsOutCellCountHiA | read-only | current | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.35 | ColumnatmAtmSpvcVpcStatsOutCellCountLoA | read-only | current | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.36 | ColumnatmAtmSpvcVpcStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.37 | ColumnatmAtmSpvcVpcStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.38 | ColumnatmAtmSpvcVpcStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.39 | ColumnatmAtmSpvcVpcStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.40 | ColumnatmAtmSpvcVpcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.38.1.41 | ColumnatmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B | read-only | current | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.42 | ColumnatmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A | read-only | current | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.43 | ColumnatmAtmSpvcVpcStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.44 | ColumnatmAtmSpvcVpcStatsInOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.45 | ColumnatmAtmSpvcVpcStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.46 | ColumnatmAtmSpvcVpcStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.47 | ColumnatmAtmSpvcVpcStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.48 | ColumnatmAtmSpvcVpcStatsInOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.49 | ColumnatmAtmSpvcVpcStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.50 | ColumnatmAtmSpvcVpcStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.51 | ColumnatmAtmSpvcVpcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.52 | ColumnatmAtmSpvcVpcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.53 | ColumnatmAtmSpvcVpcViA | read-write | current | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.54 | ColumnatmAtmSpvcVpcViB | read-write | current | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.55 | ColumnatmAtmSpvcVpcStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.38.1.56 | ColumnatmAtmSpvcVpcStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.38.1.57 | ColumnatmAtmSpvcVpcStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.38.1.58 | ColumnatmAtmSpvcVpcStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.38.1.59 | ColumnatmAtmSpvcVpcVUNIA | read-write | current | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.60 | ColumnatmAtmSpvcVpcVUNIB | read-write | current | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.61 | ColumnatmAtmSpvcVpcTrafficShapingA2B | read-write | current | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.62 | ColumnatmAtmSpvcVpcTrafficShapingB2A | read-write | current | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.63 | ColumnatmAtmSpvcVpcPriority | read-write | current | Priority of SPVC - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.6.39 | TableintfAtmPvcConnDisplayTable | not-accessible | current | List of Pvc Connections on an Interface. |
| 1.3.6.1.4.1.1751.2.18.6.39.1 | RowintfAtmPvcConnDisplayEntry | not-accessible | current | Gives list of pvc going towards the backplane on a particluar interface |
| 1.3.6.1.4.1.1751.2.18.6.39.1.1 | ColumnintfAtmPvcConnDisplaySlot | not-accessible | current | Slot of the particular interface |
| 1.3.6.1.4.1.1751.2.18.6.39.1.2 | ColumnintfAtmPvcConnDisplayPort | not-accessible | current | Port of the particular interface |
| 1.3.6.1.4.1.1751.2.18.6.39.1.3 | ColumnintfAtmPvcConnDisplayChannel | not-accessible | current | Channel of the particular interface |
| 1.3.6.1.4.1.1751.2.18.6.39.1.4 | ColumnintfAtmPvcConnDisplayVpi | not-accessible | current | VPI value for connection on Intf Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.39.1.5 | ColumnintfAtmPvcConnDisplayVci | not-accessible | current | VCI value for connection on Intf Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.39.1.6 | ColumnintfAtmPvcConnDisplayFlowType | read-only | current | Flow type:Indicates Flow Towards the Back Plane cnctnValid: Traffic flow towards BP is enabled. cnctnNull: Traffic flow towards BP is disabled. cnctnPtmpValid:… |
| 1.3.6.1.4.1.1751.2.18.7 | NodeuserServiceConfig | |||
| 1.3.6.1.4.1.1751.2.18.8 | NodesysTraps | |||
| 1.3.6.1.4.1.1751.2.18.8.1 | NodesystemEvents | |||
| 1.3.6.1.4.1.1751.2.18.8.1.1 | NotificationsystemColdStartNotify | current | Info : System has successfully completed initialization from a complete power down stage and is ready for operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.2 | NotificationsystemWarmStartNotify | current | Info : System has successfully completed initialization from a user or other system level interrupt or restart and is ready for operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.3 | NotificationecdBootFailureNotify | current | Critical : System failed in the Boot (startup) procedures. Please call Support immediately to resolve the problem. | |
| 1.3.6.1.4.1.1751.2.18.8.1.4 | NotificationreferenceClockFailNotify | current | Critical : The reference clock used for the operation of the bus-based backplane has failed. Please call Support immediately to resolve the problem. | |
| 1.3.6.1.4.1.1751.2.18.8.1.5 | NotificationreferenceClockClearedNotify | current | Info : The error in the backplane reference clock has been corrected. | |
| 1.3.6.1.4.1.1751.2.18.8.1.6 | NotificationcompositeClockFailNotify | current | Critical : The composite clock has failed. Please call Support immediately to resolve the problem. | |
| 1.3.6.1.4.1.1751.2.18.8.1.7 | NotificationcompositeClockClearedNotify | current | Info : The error in the composite clock has been corrected. | |
| 1.3.6.1.4.1.1751.2.18.8.1.8 | NotificationstratumModeChangeNotify | current | Info : The current operational status of the Stratum card has changed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.9 | NotificationpowerSupplyStatusNotify | current | Minor : Indicates the status of the power supply. | |
| 1.3.6.1.4.1.1751.2.18.8.1.10 | NotificationsoftwareDownloadStatusNotify | current | Info : Indicates the completion status of the ftp download of a software upgrade. | |
| 1.3.6.1.4.1.1751.2.18.8.1.11 | NotificationmuxReadyConfirmReceivedNotify | current | Info : Indicates that the MUX (AC 120) has received a MUX_READY_CONF message in response to the MUX_READY_IND message when the AC 120 is configured as the TCP … | |
| 1.3.6.1.4.1.1751.2.18.8.1.12 | NotificationmuxReadyConfirmNotReceivedNotify | current | Major : If AC 120 is configured as TCP client, this trap is sent if the MUX_READY_CONF message is not received after sending the MUX_READY_IND message three ti… | |
| 1.3.6.1.4.1.1751.2.18.8.1.13 | NotificationoneWayMessageWhileInTwoWayStateNotify | current | Major : This trap indicates that a one way message is received from the Signalling Gateway (SG) when the AC 120 is in the two way state of the keep-alive proto… | |
| 1.3.6.1.4.1.1751.2.18.8.1.14 | NotificationinactivityTimerExpiredNotify | current | Major : Sent by the AC 120 when the inactivity timer of the keep-alive protocoal expires, i.e. when the AC 120 does not see a message from the Signalling Gatew… | |
| 1.3.6.1.4.1.1751.2.18.8.1.15 | NotificationkeepAliveTimerExpiredInLlDownStateNotify | current | Major : Sent by the AC 120 when the keep-alive timer expires in the LLDOWN state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive mes… | |
| 1.3.6.1.4.1.1751.2.18.8.1.16 | NotificationkeepAliveTimerExpiredInOneWayStateNotify | current | Major : Sent by the AC 120 when the keep-alive timer expires in the ONE-WAY state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive me… | |
| 1.3.6.1.4.1.1751.2.18.8.1.17 | NotificationcompleteClockFailedNotify | current | Critical : The stratum cards have either been removed or have failed leading to no clock being provided. | |
| 1.3.6.1.4.1.1751.2.18.8.1.18 | NotificationcompleteClockRecoveredNotify | current | Info : A stratum card is now available to provide a clock source. | |
| 1.3.6.1.4.1.1751.2.18.8.1.19 | NotificationbackplaneCircuitryFailedNotify | current | Critical : There is no activity on the cell bus. Please call Support immediately to resolve the problem. | |
| 1.3.6.1.4.1.1751.2.18.8.1.20 | NotificationbackplaneCircuitryRecoveredNotify | current | Info : The cpu card is able to detect activity on the cell bus. | |
| 1.3.6.1.4.1.1751.2.18.8.1.21 | NotificationremoteRebootNotify | current | Info : Indicates the result of the requested reboot action. | |
| 1.3.6.1.4.1.1751.2.18.8.1.22 | NotificationsaveConfigurationNotify | current | Info : Indicates the result of the requested save configuration. | |
| 1.3.6.1.4.1.1751.2.18.8.1.23 | NotificationversionConfigurationNotify | current | Info : Indicates the completion status of the upgrade or downgrade. | |
| 1.3.6.1.4.1.1751.2.18.8.1.24 | NotificationfileTransferStatusNotify | current | Info : Indicates the percent complete of the current upgrade, downgrade, or ftp download in progress. | |
| 1.3.6.1.4.1.1751.2.18.8.1.25 | NotificationipOrMaskInvalidNotify | current | Response : The indicated ip address is invalid. | |
| 1.3.6.1.4.1.1751.2.18.8.1.26 | NotificationalarmCardInputChangeNotify | current | Info : Indicates that the deviceId with alarmCardReasonCode has changed its status. | |
| 1.3.6.1.4.1.1751.2.18.8.1.27 | NotificationremoveConfigFilesNotify | current | Info : Indicates the status of the removal of the configuration files. | |
| 1.3.6.1.4.1.1751.2.18.8.1.28 | NotificationalarmCardOutputChangeNotify | current | Info : Indicates that the deviceId with alarmCardReasonCode has changed its status. | |
| 1.3.6.1.4.1.1751.2.18.8.1.29 | NotificationalarmCardAcoChangeNotify | current | Info : Indicates the action taken by the indicated type of the audible alarm. | |
| 1.3.6.1.4.1.1751.2.18.8.1.30 | NotificationsnmpCommunityStringsChangedToPublicNotify | current | Critical : An error has been detected in the agt.pty file and the community strings have been changed to be public. | |
| 1.3.6.1.4.1.1751.2.18.8.1.31 | NotificationpnniNodeCfgNotify | current | Info : Indicates that a PNNI Node has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.1.32 | NotificationpnniNodeCfgFailNotify | current | Info : Indicates that a PNNI Node Creation has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.33 | NotificationpnniNodeModFailNotify | current | Info : Indicates that a PNNI Node Modification has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.34 | NotificationpnniNodeDelFailNotify | current | Info : Indicates that a PNNI Node Deletion has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.35 | NotificationpnniNodeOOSFailNotify | current | Info : Indicates that the action of taking a PNNI Node Out of Service has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.36 | NotificationpnniNodeISFailNotify | current | Info : Indicates that the action of bringing a PNNI Node into service has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.37 | NotificationpnniRtAddrCfgNotify | current | Info : Indicates that a new PNNI Route Address has been Created. | |
| 1.3.6.1.4.1.1751.2.18.8.1.38 | NotificationpnniRtAddrCfgFailNotify | current | Info : Indicates that a PNNI Route Address Configuration has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.39 | NotificationpnniRtAddrModFailNotify | current | Info : Indicates that a PNNI Route Address Modification has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.40 | NotificationpnniRtAddrDelFailNotify | current | Info : Indicates that a PNNI Route Address Deletion has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.1.41 | NotificationpnniRtAddrAddByIlmiNotify | current | Info : Indicates that an end system Address has been dynamically added to PNNI by ILMI. | |
| 1.3.6.1.4.1.1751.2.18.8.1.42 | NotificationpnniRtAddrDelByIlmiNotify | current | Info : Indicates that an end system Address has been dynamically deleted from PNNI by ILMI. | |
| 1.3.6.1.4.1.1751.2.18.8.1.43 | NotificationcallContrlResAllocFailNotify | current | Info: Indicates that the configuration of call control resource allocation fails. | |
| 1.3.6.1.4.1.1751.2.18.8.1.44 | NotificationdifferentSystemSoftwareNotify | current | Critical: Indicates that the primary and backup cpu's are running different versions of software. This could cause system problems since the database files wil… | |
| 1.3.6.1.4.1.1751.2.18.8.1.45 | NotificationinputPortClockFailNotify | current | Critical : The input port clock has failed. Please call Support immediately to resolve the problem. | |
| 1.3.6.1.4.1.1751.2.18.8.1.46 | NotificationinputPortClockClearedNotify | current | Info : The error in the input port clock has been corrected. | |
| 1.3.6.1.4.1.1751.2.18.8.1.47 | NotificationoldStratumCardNotify | current | Critical : This trap indicates that the primary stratum card does not support this mode of operation being applied in the stratum configuration. Card must be u… | |
| 1.3.6.1.4.1.1751.2.18.8.1.48 | NotificationstratumCardMismatchNotify | current | Critical : Indicates that the secondary stratum card does not support this mode of operation being applied to the primary stratum. Card must be upgraded. | |
| 1.3.6.1.4.1.1751.2.18.8.1.49 | NotificationtasCmprsAnnceNotify | current | Info : Indicates the result of the requested compress announcement operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.50 | NotificationtasTstLineNotify | current | Info : Indicates the result of the requested line test initiation operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.51 | NotificationtasMemNotify | current | Info : Indicates the result of the requested TASM memory initiation operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.52 | NotificationambientTemperatureChangeNotify | current | Info : Indicates the ambient temperature has changed by 5 degrees centigrade since the last trap message. | |
| 1.3.6.1.4.1.1751.2.18.8.1.53 | NotificationsystemInsuffMemNotify | current | Info : no enough memory for one or more features to be turned on. | |
| 1.3.6.1.4.1.1751.2.18.8.1.54 | NotificationtoneAnnceFtpStatusNotify | current | Info : Indicates the completion status of the ftp download of a tone annoucement file. | |
| 1.3.6.1.4.1.1751.2.18.8.1.55 | NotificationtasmControlBlockResAllocFailNotify | current | Info: Indicates that the configuration of tasm control block resource allocation fails. Data send with the trap: tasmControlBlockAllocFailReasonCode Possible v… | |
| 1.3.6.1.4.1.1751.2.18.8.1.56 | NotificationtasmCacheMemAllocFailNotify | current | Info: Indicates that the configuration of tasm memory cache for announcement caching allocation fails. Data send with the trap:tasmCacheMemAllocFailReasonCode … | |
| 1.3.6.1.4.1.1751.2.18.8.1.57 | NotificationremoteDbOperationStatusNotify | current | Info : Indicates the completion status of remote database operation. | |
| 1.3.6.1.4.1.1751.2.18.8.1.58 | NotificationsapphireInterfaceAddressAssignFailNotify | current | Info: Indicates that the assignment of the Sapphire interface address on which TCP connect requests are sent to SoftSwitch when PSAX is configured as Client ha… | |
| 1.3.6.1.4.1.1751.2.18.8.1.59 | NotificationswitchAlarmStatusChangeNotify | current | Critical : Trap to notify a change in the status of the alarm on the switch. | |
| 1.3.6.1.4.1.1751.2.18.8.1.60 | NotificationchassisOverTempAlarmNotify | current | Critical : Trap sent when the temperature of the chassis goes above or below a preset temperature threshold. | |
| 1.3.6.1.4.1.1751.2.18.8.2 | NodemoduleEvents | |||
| 1.3.6.1.4.1.1751.2.18.8.2.1 | NotificationcardInsertionNotify | current | Info : The indicated slot has had a card inserted into it. | |
| 1.3.6.1.4.1.1751.2.18.8.2.2 | NotificationcardRemovedOrFailedNotify | current | Major : The indicated slot has changed state. | |
| 1.3.6.1.4.1.1751.2.18.8.2.3 | NotificationlineStatusChangedNotify | current | Major : The indicated port has had a change in the line status. | |
| 1.3.6.1.4.1.1751.2.18.8.2.4 | NotificationfirmwareDownloadSucceededNotify | current | Info : The indicated slot has successfully completed a firmware download. | |
| 1.3.6.1.4.1.1751.2.18.8.2.5 | NotificationfirmwareDownloadFailedNotify | current | Minor : The indicated slot had the indicated failure during a firmware download. | |
| 1.3.6.1.4.1.1751.2.18.8.2.6 | NotificationmoduleRebootNotify | current | Major : This trap indicates that a cardType in cardSlot becomes busy and the CPU reboots it. This is different from when an I/O card is actually removed. | |
| 1.3.6.1.4.1.1751.2.18.8.2.7 | Notificationoc3APSStateChangeNotify | current | Notification of a change in the APS state machine. | |
| 1.3.6.1.4.1.1751.2.18.8.2.8 | Notificationoc3APSSwitchoverNotify | current | Notification of a switchover in an APS pair. | |
| 1.3.6.1.4.1.1751.2.18.8.2.9 | NotificationportModifyFailNotify | current | Info : Notification that an attempt to modify an port parameters has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.2.10 | NotificationstratumActivitySwitchOverNotify | current | Info : The secondary stratum card has become the primary primary card. | |
| 1.3.6.1.4.1.1751.2.18.8.2.11 | NotificationimaGroupStatusChangeNotify | current | The indicated SSPPCCC has a change in the states of the IMA Group Channel | |
| 1.3.6.1.4.1.1751.2.18.8.3 | NodeinterfaceEvents | |||
| 1.3.6.1.4.1.1751.2.18.8.3.1 | NotificationinterfaceCreatedNotify | current | Info : Notification that an interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.3.2 | NotificationinterfaceDeletedNotify | current | Info : Notification that an interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.3.3 | NotificationinterfaceModifiedNotify | current | Info : Notification that an interface has been modified. | |
| 1.3.6.1.4.1.1751.2.18.8.3.4 | NotificationinterfaceModifyFailNotify | current | Info : Notification that an attempt to modify an interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.3.5 | NotificationinterfaceOutOfServiceNotify | current | Major : Notification that an interface is now out of service. | |
| 1.3.6.1.4.1.1751.2.18.8.3.6 | NotificationinterfaceInServiceNotify | current | Info : Notification that an interface is now in service. | |
| 1.3.6.1.4.1.1751.2.18.8.3.7 | NotificationbridgeDomainFullNotify | current | Info : The 15 ports available for the bridge domain are being used, leaving no space for an additional port. | |
| 1.3.6.1.4.1.1751.2.18.8.3.8 | NotificationbridgeDomainExceededForSlotNotify | current | Info : The bridge domain number has been exceeded for the slot. | |
| 1.3.6.1.4.1.1751.2.18.8.3.9 | NotificationbridgeDomainNumberInUseNotify | current | Info : Notification that a bridge domain number is currently in use. | |
| 1.3.6.1.4.1.1751.2.18.8.3.10 | NotificationbridgeDomainInServiceNotify | current | Info : Notification that a bridge domain is now in service. | |
| 1.3.6.1.4.1.1751.2.18.8.3.11 | NotificationbridgeDomainNumberInvalidNotify | current | Info : Indicates that this interface contains an invalid bridge domain number. In order to create a domain, associate a port with a domain, or bring an interfa… | |
| 1.3.6.1.4.1.1751.2.18.8.3.12 | NotificationsignalingModifyFailNotify | current | Info : This trap indicates that signaling has already been configured for this port and to change, you must bring all interfaces out of service specified in in… | |
| 1.3.6.1.4.1.1751.2.18.8.3.13 | NotificationlmiIntfStatusNotify | current | Info : This trap indicates the status of an interface from the LMI perspective. | |
| 1.3.6.1.4.1.1751.2.18.8.3.14 | NotificationisdnLapdDownNotify | current | Info : This trap indicates that LAPD on the ISDN interface has gone down. | |
| 1.3.6.1.4.1.1751.2.18.8.3.15 | NotificationisdnLapdUpNotify | current | Info : This trap indicates that LAPD is functional on the specified ISDN interface. | |
| 1.3.6.1.4.1.1751.2.18.8.3.16 | NotificationbridgeDomainTimingRelationshipNotify | current | Info : Trap sent when one of the following relationships is violated: (1) 2 * (BridgeForwardDelay - 1.0 sec) >= BridgeMaxAge (2) BridgeMaxAge >= 2 * (BridgeHel… | |
| 1.3.6.1.4.1.1751.2.18.8.3.17 | Notificationts16UsageModifyFailNotify | current | Info : Indicates that either TS16 has been in use for data while trying to change e1 TS16 from CCS to CAS, or signaling is on for at least one of the channels … | |
| 1.3.6.1.4.1.1751.2.18.8.3.18 | NotificationceServiceTypeModifyFailNotify | current | Info : Indicates that configuring unstructured CE failed. Possible reasons are: (1) the port has been channelized; (2) the port has CAS turned on. | |
| 1.3.6.1.4.1.1751.2.18.8.3.19 | NotificationchannelizationModifyFailNotify | current | Info : Indicates that channelizing/unchannelizing failed. Possible reasons are: (1) the port has been configured for unstructured CE; (2) the port has CAS turn… | |
| 1.3.6.1.4.1.1751.2.18.8.3.20 | NotificationcirEmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as CES SPVC endpoint. Return value - interfaceIndex | |
| 1.3.6.1.4.1.1751.2.18.8.3.21 | NotificationcirEmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identif… | |
| 1.3.6.1.4.1.1751.2.18.8.3.22 | NotificationcirEmSpvcDeletedNotify | current | Info : Notification that CE SPVC configuration has been deleted. Return value - interfaceIndex | |
| 1.3.6.1.4.1.1751.2.18.8.3.23 | NotificationcirEmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.24 | NotificationcirEmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.25 | NotificationvbrSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return value - interfaceIndex | |
| 1.3.6.1.4.1.1751.2.18.8.3.26 | NotificationvbrSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identif… | |
| 1.3.6.1.4.1.1751.2.18.8.3.27 | NotificationvbrSpvcDeletedNotify | current | Info : Notification that TE SPVC configuration has been deleted. Return value - interfaceIndex | |
| 1.3.6.1.4.1.1751.2.18.8.3.28 | NotificationvbrSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.29 | NotificationvbrSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.30 | NotificationatmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return value - interfaceIndex - A-side vpi/vci value | |
| 1.3.6.1.4.1.1751.2.18.8.3.31 | NotificationatmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return value - interfaceIndex - A-side vpi/vci value - spvcConfig… | |
| 1.3.6.1.4.1.1751.2.18.8.3.32 | NotificationatmSpvcDeletedNotify | current | Info : Notification that ATM SPVC configuration has been deleted. Return value - interfaceIndex - A-side vpi/vci value | |
| 1.3.6.1.4.1.1751.2.18.8.3.33 | NotificationatmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.34 | NotificationatmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.35 | NotificationcRC4ModifyFailNotify | current | Info: Notification that modification of the CRC4 field of an E1 port failed. | |
| 1.3.6.1.4.1.1751.2.18.8.3.36 | NotificationimaGrpChannelFailNotify | current | Info : The imaGrpChannelFailNotify trap indicates a failure in the IMA group. The imaGrpChannelStatus field indicates the reason for the failure. | |
| 1.3.6.1.4.1.1751.2.18.8.3.37 | NotificationatmImaIntfFailNotify | current | Info : The atmImaIntfFailNotify trap indicates a failure in the physical IMA interface. The atmImaIntfStatus field indicates the reason for the failure. | |
| 1.3.6.1.4.1.1751.2.18.8.3.38 | NotificationimaGrpChannelClearedNotify | current | Info : The imaGrpChannelClearedNotify trap indicates a failure has been cleared in an IMA group. The imaGrpChannelStatus field indicates the failure that has b… | |
| 1.3.6.1.4.1.1751.2.18.8.3.39 | NotificationatmImaIntfClearedNotify | current | Info : The atmImaIntfClearedNotify trap indicates a failure has been cleared in an IMA interface. The atmImaIntfStatus field indicates the failure that has bee… | |
| 1.3.6.1.4.1.1751.2.18.8.3.40 | NotificationpnniProtLnkUpAndAdv | current | Info : Indicates that the Protocol Status of the PNNI Link is Up and Advertising. | |
| 1.3.6.1.4.1.1751.2.18.8.3.41 | NotificationpnniProtLinkUpAndNotAdv | current | Info : Indicates that the Protocol Status of the PNNI Link is Up but not Advertising. | |
| 1.3.6.1.4.1.1751.2.18.8.3.42 | NotificationpnniProtLnkStatDown | current | Info : Indicates that the Protocol Status of the PNNI Link is Down. | |
| 1.3.6.1.4.1.1751.2.18.8.3.43 | NotificationpnniIntfCfgFailNotify | current | Info : Indicates that a PNNI Interface has failed to be Created. | |
| 1.3.6.1.4.1.1751.2.18.8.3.44 | NotificationviprPingTrap | current | Info : The Vipr Task is notifying Network Management of the disposition of a previous Ping Request. | |
| 1.3.6.1.4.1.1751.2.18.8.3.45 | NotificationviprArpTrap | current | Info : The Vipr Task is notifying Network Management of the disposition of a previous Arp Table Request. | |
| 1.3.6.1.4.1.1751.2.18.8.3.46 | NotificationviprRoutingTrap | current | Info : The Vipr Task is notifying Network Management of the disposition of a previous Routing Table Request. | |
| 1.3.6.1.4.1.1751.2.18.8.3.47 | NotificationviprVpnTrap | current | Info : Indicates success/fail of VPN level operations. | |
| 1.3.6.1.4.1.1751.2.18.8.3.48 | NotificationviprIpIntfTrap | current | Info : Indicates success/fail of IP Network Interface level operations. | |
| 1.3.6.1.4.1.1751.2.18.8.3.49 | NotificationviprSubChanTrap | current | Info : Indicates success/fail of Sub Channel level operations. | |
| 1.3.6.1.4.1.1751.2.18.8.3.50 | NotificationviprRtSrvTrap | current | Info : Indicates success/fail of Vipr (Route Server) operations. | |
| 1.3.6.1.4.1.1751.2.18.8.3.51 | NotificationatmSvcIntfLayer2Up | current | Info : Indicates that an ATM Svc Interface Assured Data Link is Up. | |
| 1.3.6.1.4.1.1751.2.18.8.3.52 | NotificationatmSvcIntfLayer2Down | current | Info : Indicates that an ATM Svc Interface Assured Data Link is Down. | |
| 1.3.6.1.4.1.1751.2.18.8.3.53 | NotificationapsConfigurationModifyFailNotify | current | Info: Notification that an attempt to modify an APS configuration has failed | |
| 1.3.6.1.4.1.1751.2.18.8.3.54 | NotificationviprStatRtTrap | current | Info : Indicates success/fail of Static Route operations. | |
| 1.3.6.1.4.1.1751.2.18.8.3.55 | NotificationinterfaceCreateFailNotify | current | Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details. | |
| 1.3.6.1.4.1.1751.2.18.8.3.56 | NotificationvirtualIntfCreatedNotify | current | Response to creation of VI | |
| 1.3.6.1.4.1.1751.2.18.8.3.57 | NotificationvirtualIntfModifiedNotify | current | Response to modification of VI | |
| 1.3.6.1.4.1.1751.2.18.8.3.58 | NotificationvirtualIntfDeleteNotify | current | Response to deletion of VI | |
| 1.3.6.1.4.1.1751.2.18.8.3.59 | NotificationvirtualIntfModifyFailNotify | current | Response to Modify Fail of VI, Overload pvcFailureReasonCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.60 | NotificationfrAtmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as FR SPVC endpoint. Return values - interfaceIndex - dlci value | |
| 1.3.6.1.4.1.1751.2.18.8.3.61 | NotificationfrAtmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as FR SPVC endpoint has failed. Return values - interfaceIndex - dlci value - spvcConfigFailureCod… | |
| 1.3.6.1.4.1.1751.2.18.8.3.62 | NotificationfrAtmSpvcDeletedNotify | current | Info : Notification that FR SPVC configuration has been deleted. Return values - interfaceIndex - dlci value | |
| 1.3.6.1.4.1.1751.2.18.8.3.63 | NotificationfrAtmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. Return values - interfaceIndex - dlci value | |
| 1.3.6.1.4.1.1751.2.18.8.3.64 | NotificationfrAtmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a FR SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.65 | NotificationatmAtmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.66 | NotificationatmAtmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi/vci values - remote N… | |
| 1.3.6.1.4.1.1751.2.18.8.3.67 | NotificationatmAtmSpvcDeletedNotify | current | Info : Notification that ATM SPVC configuration has been deleted. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.68 | NotificationatmAtmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.69 | NotificationatmAtmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.70 | NotificationcirAtmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as CE SPVC endpoint. Return values - interfaceIndex - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.71 | NotificationcirAtmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigF… | |
| 1.3.6.1.4.1.1751.2.18.8.3.72 | NotificationcirAtmSpvcDeletedNotify | current | Info : Notification that CE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.73 | NotificationcirAtmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.74 | NotificationcirAtmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.75 | NotificationvbrAtmSpvcConfiguredNotify | current | Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return values - interfaceIndex - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.76 | NotificationvbrAtmSpvcConfigFailNotify | current | Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigF… | |
| 1.3.6.1.4.1.1751.2.18.8.3.77 | NotificationvbrAtmSpvcDeletedNotify | current | Info : Notification that TE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address | |
| 1.3.6.1.4.1.1751.2.18.8.3.78 | NotificationvbrAtmSpvcModifiedNotify | current | Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.79 | NotificationvbrAtmSpvcModifyFailNotify | current | Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.80 | NotificationvirtualUNIIntfCreatedNotify | current | Response to creation of Virtual UNI | |
| 1.3.6.1.4.1.1751.2.18.8.3.81 | NotificationvirtualUNIIntfCreateFailNotify | current | Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details. | |
| 1.3.6.1.4.1.1751.2.18.8.3.82 | NotificationvirtualUNIIntfModifiedNotify | current | Notification of a failure to modify a Virtual UNI interface. | |
| 1.3.6.1.4.1.1751.2.18.8.3.83 | NotificationvirtualUNIIntfDeleteNotify | current | Response to deletion of Virtual UNI | |
| 1.3.6.1.4.1.1751.2.18.8.3.84 | NotificationvirtualUNIIntfModifyFailNotify | current | Response to Modify Fail of Virtual UNI, Overload interfaceFailureReasonCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.85 | NotificationvirtualUNIIntfOutOfServiceNotify | current | Notification of virtualUNI Out Of Service | |
| 1.3.6.1.4.1.1751.2.18.8.3.86 | NotificationvirtualUNIIntfInServiceNotify | current | Notification of virtualUNI in Service | |
| 1.3.6.1.4.1.1751.2.18.8.3.87 | Notificationgr303IgCreatedNotify | current | Response to creation of GR303IG | |
| 1.3.6.1.4.1.1751.2.18.8.3.88 | Notificationgr303IgCreateFailNotify | current | Info : Notification that an attempt to create a gr303 interface group has failed. interfaceFailureReasonCode gives details. | |
| 1.3.6.1.4.1.1751.2.18.8.3.89 | Notificationgr303IgModifiedNotify | current | Response to modification of GR303IG | |
| 1.3.6.1.4.1.1751.2.18.8.3.90 | Notificationgr303IgDeleteNotify | current | Response to deletion of GR303IG | |
| 1.3.6.1.4.1.1751.2.18.8.3.91 | Notificationgr303IgModifyFailNotify | current | Response to Modify Fail of GR303IG, Overload interfaceFailureReasonCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.92 | Notificationgr303IgOutOfServiceNotify | current | Notification of GR303IG Out Of Service | |
| 1.3.6.1.4.1.1751.2.18.8.3.93 | Notificationgr303IgInServiceNotify | current | Notification of GR303IG in Service | |
| 1.3.6.1.4.1.1751.2.18.8.3.94 | Notificationgr303IgIntfAddedNotify | current | Response to addition of DS1 interface into GR303IG | |
| 1.3.6.1.4.1.1751.2.18.8.3.95 | Notificationgr303IgIntfAddFailNotify | current | Info : Notification that an attempt to add an interface has failed. interfaceFailureReasonCode gives details. | |
| 1.3.6.1.4.1.1751.2.18.8.3.96 | Notificationgr303IgIntfDeleteNotify | current | Response to deletion of DS1 interface from GR303IG | |
| 1.3.6.1.4.1.1751.2.18.8.3.97 | Notificationgr303TMCChanDownNotify | current | Info : This trap indicates that TMC (LAPD) on the GR303 interface has gone down. | |
| 1.3.6.1.4.1.1751.2.18.8.3.98 | Notificationgr303EOCChanDownNotify | current | Info : This trap indicates that EOC (LAPD) on the GR303 interface has gone down. | |
| 1.3.6.1.4.1.1751.2.18.8.3.99 | Notificationgr303TMCChanUpNotify | current | Info : This trap indicates that TMC(LAPD) is functional on the specified GR303 interface. | |
| 1.3.6.1.4.1.1751.2.18.8.3.100 | Notificationgr303EOCChanUpNotify | current | Info : This trap indicates that EOC(LAPD) is functional on the specified GR303 interface. | |
| 1.3.6.1.4.1.1751.2.18.8.3.101 | Notificationgr303PPSStateChangeNotify | current | This indicates a change in the states of primary and secondary TMC/EOC (lapd) | |
| 1.3.6.1.4.1.1751.2.18.8.3.102 | Notificationgr303PPSSwitchoverNotify | current | This notification is the result of PPS switching command which will indicate the reason code, initiator and states | |
| 1.3.6.1.4.1.1751.2.18.8.3.103 | Notificationgr303PPSCommandFailNotify | current | This is the notification of failure of PPS switching command | |
| 1.3.6.1.4.1.1751.2.18.8.3.104 | NotificationinterfaceBandwidthChangeNotify | current | Info : Notification that a interface has undergone reduction in bandwidth. Critical depending on Failure Reason Code. | |
| 1.3.6.1.4.1.1751.2.18.8.3.105 | NotificationatmAtmSpvpConfiguredNotify | current | Info : Notification that an ATM SPVP has been configured at the ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi value - remote NSAP Address | |
| 1.3.6.1.4.1.1751.2.18.8.3.106 | NotificationatmAtmSpvpConfigFailNotify | current | Info : Notification that an attempt to configure an ATM SPVP at the ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi value - remote NS… | |
| 1.3.6.1.4.1.1751.2.18.8.3.107 | NotificationatmAtmSpvpDeletedNotify | current | Info : Notification that an ATM SPVP configuration has been deleted. Return values - interfaceIndex - A-side vpi value - remote NSAP Address | |
| 1.3.6.1.4.1.1751.2.18.8.3.108 | NotificationatmAtmSpvpModifiedNotify | current | Info : Notification that an ATM SPVP configuration has been modified - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.109 | NotificationatmAtmSpvpModifyFailNotify | current | Info : Notification that an attempt to modify a ATM SPVP configuration has failed - this trap has been obsoleted 07/01/2001. | |
| 1.3.6.1.4.1.1751.2.18.8.3.110 | NotificationatmTrunkingLocalIWFConfiguredNotify | current | Info: Local IWF Configured return value: atmTrunkingIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.111 | NotificationatmTrunkingLocalIWFConfigFailNotify | current | Info: Local IWF Configured return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.112 | NotificationatmTrunkingLocalIWFModifiedNotify | current | Info: configuration of Local IWF modified return value: atmTrunkingIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.113 | NotificationatmTrunkingLocalIWFModifyFailNotify | current | Info: Modification of Local IWF has failed return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.114 | NotificationatmTrunkingLocalIWFDeletedNotify | current | Info: configuration of Local IWF deleted return value: atmTrunkingIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.115 | NotificationatmTrunkingLocalIWFDeleteFailNotify | current | Info: configuration of Local IWF can not be deleted return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.116 | NotificationatmTrunkingRemoteIWFConfiguredNotify | current | Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.117 | NotificationatmTrunkingRemoteIWFConfigFailNotify | current | Info : Notification that an ATM TRUNKING Remote IWF configuration has failed with return value : - atmTrunkingRmtIWFIdentifier - atmTrunkingConfigFailureCode | |
| 1.3.6.1.4.1.1751.2.18.8.3.118 | NotificationatmTrunkingRemoteIWFDeletedNotify | current | Info : Notification that an ATM TRUNKING Remote IWF has been deleted with return values - atmTrunkingRmtIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.119 | NotificationatmTrunkingRemoteIWFModifiedNotify | current | Info : Notification that an ATM TRUNKING Remote IWF has been modified with return values - atmTrunkingRmtIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.120 | NotificationatmTrunkingRemoteIWFModifyFailNotify | current | Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.121 | NotificationatmTrunkingSigVccConfiguredNotify | current | Info : Notification that an ATM TRUNKING Signalling VCC has been configured between Local IWF and with return values - atmTrunkingSigVccRmtIWFIdentifier - atmT… | |
| 1.3.6.1.4.1.1751.2.18.8.3.122 | NotificationatmTrunkingSigVccConfigFailNotify | current | Info : Notification that an ATM TRUNKING Signalling VCC configuration has failed with return value: - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIden… | |
| 1.3.6.1.4.1.1751.2.18.8.3.123 | NotificationatmTrunkingSigVccDeletedNotify | current | Info : Notification that an ATM TRUNKING Signalling VCC has been deleted with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.3.124 | NotificationatmTrunkingBrVccConfiguredNotify | current | Info : Notification that an ATM TRUNKING Bearer VCC has been configured between Local IWF and with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunki… | |
| 1.3.6.1.4.1.1751.2.18.8.3.125 | NotificationatmTrunkingBrVccConfigFailNotify | current | Info : Notification that an ATM TRUNKING Bearer VCC configuration has failed with return value: - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier… | |
| 1.3.6.1.4.1.1751.2.18.8.3.126 | NotificationatmTrunkingBrVccDeletedNotify | current | Info : Notification that an ATM TRUNKING Bearer VCC has been deleted with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.4 | NodeconnectionEvents | |||
| 1.3.6.1.4.1.1751.2.18.8.4.1 | NotificationatmPvcVccReqFailNotify | current | Response : The PVC VCC connection request between two atm interfaces failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.2 | NotificationatmPvcVpcReqFailNotify | current | Response : The PVC VPC connection request between two atm interfaces failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.3 | NotificationipAtmAppPvcVccReqFailNotify | current | Response : The PVC VCC connection request between in-band management and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.4 | NotificationcirEmAtmPvcVccReqFailNotify | current | Response : The PVC VCC connection request between a circuit emulation interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.5 | NotificationvbrAtmPvcVccReqFailNotify | current | Response : The PVC VCC connection request between a variable-bit rate interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.6 | NotificationfrAtmPvcVccReqFailNotify | current | Response : The PVC VCC connection request between a frame-relay interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.7 | NotificationfrFrPvcReqFailNotify | current | Response : The PVC connection request between two frame-relay interfaces has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.8 | NotificationcirEmCirEmPvcReqFailNotify | current | Response : The PVC connection request between two circuit emulation interfaces has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.9 | NotificationvbrVbrPvcReqFailNotify | current | Response : The PVC connection request between two variable-bit rate interfaces has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.10 | NotificationatmPvcVccSetupNotify | current | Response : The PVC VCC connection between two atm interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.11 | NotificationatmPvcVpcSetupNotify | current | Response : The PVC VPC connection between two atm interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.12 | NotificationipAtmAppPvcVccSetupNotify | current | Response : The PVC VCC connection between in-band management and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.13 | NotificationcirEmAtmPvcVccSetupNotify | current | Response : The PVC VCC connection between a circuit emulation interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.14 | NotificationvbrAtmPvcVccSetupNotify | current | Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.15 | NotificationfrAtmPvcVccSetupNotify | current | Response : The PVC VCC connection between a frame-relay interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.16 | NotificationfrFrPvcSetupNotify | current | Response : The PVC connection between two frame-relay interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.17 | NotificationcirEmCirEmPvcSetupNotify | current | Response : The PVC connection between two circuit-emulation interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.18 | NotificationvbrVbrPvcSetupNotify | current | Response : The PVC connection between two variable-bit rate interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.19 | NotificationatmPvcVccTearDownNotify | current | Response : The PVC VCC connection between two atm interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.20 | NotificationatmPvcVpcTearDownNotify | current | Response : The PVC VPC connection between two atm interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.21 | NotificationipAtmAppPvcVccTearDownNotify | current | Response : The PVC VCC connection between in-band management and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.22 | NotificationcirEmAtmPvcVccTearDownNotify | current | Response : The PVC VCC connection between a circuit-emulation interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.23 | NotificationvbrAtmPvcVccTearDownNotify | current | Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.24 | NotificationfrAtmPvcVccTearDownNotify | current | Response : The PVC VCC connection between a frame-relay interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.25 | NotificationfrFrPvcTearDownNotify | current | Response : The PVC connection between two frame-relay interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.26 | NotificationcirEmCirEmPvcTearDownNotify | current | Response : The PVC connection between two circuit-emulation interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.27 | NotificationvbrVbrPvcTearDownNotify | current | Response : The PVC connection between two variable-bit rate interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.28 | NotificationbridgeBridgePvcReqFailNotify | current | Response : The PVC connection request between two bridge interfaces has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.29 | NotificationbridgeBridgePvcSetupNotify | current | Response : The PVC connection between two bridge interfaces has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.30 | NotificationbridgeBridgePvcTearDownNotify | current | Response : The PVC connection between two bridge interfaces has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.31 | NotificationbridgeAtmPvcVccReqFailNotify | current | Response : The PVC VCC connection request between a bridge interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.32 | NotificationbridgeAtmPvcVccSetupNotify | current | Response : The PVC VCC connection between a bridge interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.33 | NotificationbridgeAtmPvcVccTearDownNotify | current | Response : The PVC VCC connection between a bridge interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.34 | NotificationcellTestReqFailNotify | current | Response : The PVC connection request has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.35 | NotificationlmiDlciStatusNotify | current | Response : Indicates the end-to-end status of the PVC of which this DLCI is a segment of. | |
| 1.3.6.1.4.1.1751.2.18.8.4.36 | NotificationcirEmAtmBkPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between a circuit emulation interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.37 | NotificationcirEmAtmBkPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between a circuit emulation interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.38 | NotificationcirEmAtmBkPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between a circuit-emulation interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.39 | NotificationvbrAtmBkPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between a variable-bit rate interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.40 | NotificationvbrAtmBkPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.41 | NotificationvbrAtmBkPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.42 | NotificationatmBkPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between an atm interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.43 | NotificationatmBkPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.44 | NotificationatmBkPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.45 | NotificationfrAtmBkPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between a frame relay interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.46 | NotificationfrAtmBkPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.47 | NotificationfrAtmBkPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.48 | NotificationatmBkPvcVpcReqFailNotify | current | Response : The DHPVC VPC backup connection request between an atm interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.49 | NotificationatmBkPvcVpcSetupNotify | current | Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.50 | NotificationatmBkPvcVpcTearDownNotify | current | Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.51 | NotificationbridgeAtmBkPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between a bridge interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.52 | NotificationbridgeAtmBkPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.53 | NotificationbridgeAtmBkPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.54 | NotificationipAtmBkAppPvcVccReqFailNotify | current | Response : The DHPVC VCC backup connection request between an in-band management interface and an atm interface has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.55 | NotificationipAtmBkAppPvcVccSetupNotify | current | Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been created. | |
| 1.3.6.1.4.1.1751.2.18.8.4.56 | NotificationipAtmBkAppPvcVccTearDownNotify | current | Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.57 | NotificationcirEmAtmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceI… | |
| 1.3.6.1.4.1.1751.2.18.8.4.58 | NotificationvbrAtmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceI… | |
| 1.3.6.1.4.1.1751.2.18.8.4.59 | NotificationatmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci B… | |
| 1.3.6.1.4.1.1751.2.18.8.4.60 | NotificationcirEmAtmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-sid… | |
| 1.3.6.1.4.1.1751.2.18.8.4.61 | NotificationvbrAtmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-sid… | |
| 1.3.6.1.4.1.1751.2.18.8.4.62 | NotificationatmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci B-side inte… | |
| 1.3.6.1.4.1.1751.2.18.8.4.63 | NotificationoamTestReqFailNotify | current | Response : OAM loopback test request has failed. | |
| 1.3.6.1.4.1.1751.2.18.8.4.64 | NotificationoamActDeactResultNotify | current | Response : the final status of oam Activation-Deactivation request. | |
| 1.3.6.1.4.1.1751.2.18.8.4.65 | NotificationfrAtmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between FR and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side dlci B-sid… | |
| 1.3.6.1.4.1.1751.2.18.8.4.66 | NotificationfrAtmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between FR and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side dlci B-side interfac… | |
| 1.3.6.1.4.1.1751.2.18.8.4.67 | NotificationatmAtmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci R… | |
| 1.3.6.1.4.1.1751.2.18.8.4.68 | NotificationatmAtmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP… | |
| 1.3.6.1.4.1.1751.2.18.8.4.69 | NotificationcirAtmSpvcVccSetUpNotify | current | Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP addre… | |
| 1.3.6.1.4.1.1751.2.18.8.4.70 | NotificationcirAtmSpvcVccTearDownNotify | current | Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side … | |
| 1.3.6.1.4.1.1751.2.18.8.4.71 | NotificationvbrAtmSpvcSetUpNotify | current | Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP addre… | |
| 1.3.6.1.4.1.1751.2.18.8.4.72 | NotificationvbrAtmSpvcTearDownNotify | current | Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side … | |
| 1.3.6.1.4.1.1751.2.18.8.4.73 | Notificationaal2TrunkConfigSetupNotify | current | Response : The PVC VCC connection for aal2 trunk | |
| 1.3.6.1.4.1.1751.2.18.8.4.74 | Notificationaal2TrunkConfigTearDownNotify | current | Response : The PVC VCC AAL2 Trunk has been deleted | |
| 1.3.6.1.4.1.1751.2.18.8.4.75 | Notificationaal2TrunkConfigReqFailNotify | current | Response : The PVC VCC aal2 trunk could not be setup | |
| 1.3.6.1.4.1.1751.2.18.8.4.76 | Notificationgr303Aal2PvcConfigReqFailNotify | current | Response : The GR303 PVC VCC on aal2 trunk could not be setup | |
| 1.3.6.1.4.1.1751.2.18.8.4.77 | Notificationgr303Aal2PvcSetUpNotify | current | Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been made successfully. | |
| 1.3.6.1.4.1.1751.2.18.8.4.78 | Notificationgr303Aal2PvcTearDownNotify | current | Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been deleted | |
| 1.3.6.1.4.1.1751.2.18.8.4.79 | NotificationdhpvcChangeNotify | current | This will indicate the changes in a dual home pvc. This will have 2 indications. One is when there is a switchover which indicate the last state and the new on… | |
| 1.3.6.1.4.1.1751.2.18.8.4.80 | NotificationatmAtmSpvcVpcSetUpNotify | current | Response : Notification that a SPVP connection between ATM and ATM endpoints has been made successfully. | |
| 1.3.6.1.4.1.1751.2.18.8.4.81 | NotificationatmAtmSpvcVpcTearDownNotify | current | Response : Notification that a SPVP connection between ATM and ATM endpoints has been deleted. | |
| 1.3.6.1.4.1.1751.2.18.8.4.82 | NotificationiptResultNotify | current | Response : the final status of interface protection request. | |
| 1.3.6.1.4.1.1751.2.18.8.4.83 | NotificationpgtResultNotify | current | Response : the final status of interface protection group request. | |
| 1.3.6.1.4.1.1751.2.18.8.4.84 | NotificationatmTrunkingSigVccSetUpNotify | current | Response : Notification that a ATM Trunking Signalling VCC has been setup successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIden… | |
| 1.3.6.1.4.1.1751.2.18.8.4.85 | NotificationatmTrunkingSigVccTearDownNotify | current | Response : Notification that a ATM Trunking Signalling VCC has been torn down successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVcc… | |
| 1.3.6.1.4.1.1751.2.18.8.4.86 | NotificationatmTrunkingBrVccSetUpNotify | current | Response : Notification that a ATM Trunking Bearer VCC has been setup successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier | |
| 1.3.6.1.4.1.1751.2.18.8.4.87 | NotificationatmTrunkingBrVccTearDownNotify | current | Response : Notification that a ATM Trunking Bearer VCC has been torn down successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdenti… | |
| 1.3.6.1.4.1.1751.2.18.9 | NodesysStatistics | |||
| 1.3.6.1.4.1.1751.2.18.10 | NodeequipStatistics | |||
| 1.3.6.1.4.1.1751.2.18.10.1 | Tableds3PortStatsTable | not-accessible | current | Table of statisics for a DS3 port |
| 1.3.6.1.4.1.1751.2.18.10.1.1 | Rowds3PortStatsEntry | not-accessible | current | Row definition for the DS3 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.1.1.1 | Columnds3PortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.1.1.2 | Columnds3PortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.1.1.3 | Columnds3PortStatsCurrentSEFSs | read-only | current | severely errored framing seconds |
| 1.3.6.1.4.1.1751.2.18.10.1.1.4 | Columnds3PortStatsCurrentLCVs | read-only | current | Line coding violations encountered |
| 1.3.6.1.4.1.1751.2.18.10.1.1.5 | Columnds3PortStatsCurrentLESs | read-only | current | Line errored seconds |
| 1.3.6.1.4.1.1751.2.18.10.2 | Tableds1PortStatsTable | not-accessible | current | Table of statisics for a DS1 port |
| 1.3.6.1.4.1.1751.2.18.10.2.1 | Rowds1PortStatsEntry | not-accessible | current | Row definition for the DS1 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.2.1.1 | Columnds1PortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.2.1.2 | Columnds1PortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.2.1.3 | Columnds1PortStatsCurrentESs | read-only | current | The number of Errored Seconds, encountered by a DS1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.2.1.4 | Columnds1PortStatsCurrentSESs | read-only | current | The number of Severely Errored Seconds encoun- tered by a DS1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.2.1.5 | Columnds1PortStatsCurrentLCVs | read-only | current | The number of Line Code Violations (LCVs) en- countered by a DS1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.3 | Tableoc3PortStatsTable | not-accessible | current | Table of statisics for a OC3 port |
| 1.3.6.1.4.1.1751.2.18.10.3.1 | Rowoc3PortStatsEntry | not-accessible | current | Row definition for the OC3 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.3.1.1 | Columnoc3PortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.3.1.2 | Columnoc3PortStatsSectionBip8Errs | read-only | current | section sublayer BIP8 errors. |
| 1.3.6.1.4.1.1751.2.18.10.3.1.3 | Columnoc3PortStatsLineBip8Errs | read-only | current | line sublayer BIP8 errors. |
| 1.3.6.1.4.1.1751.2.18.10.3.1.4 | Columnoc3PortStatsPathBip8Errs | read-only | current | path sublayer BIP8 errors. |
| 1.3.6.1.4.1.1751.2.18.10.3.1.5 | Columnoc3PortStatsLineFebeCount | read-only | current | line sublayer FEBE count. |
| 1.3.6.1.4.1.1751.2.18.10.3.1.6 | Columnoc3PortStatsPathFebeCount | read-only | current | path sublayer FEBE count. |
| 1.3.6.1.4.1.1751.2.18.10.3.1.7 | Columnoc3PortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.4 | TablemsPortStatsTable | not-accessible | current | Table of statisics for a MS port |
| 1.3.6.1.4.1.1751.2.18.10.4.1 | RowmsPortStatsEntry | not-accessible | current | Row definition for the MS port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.4.1.1 | ColumnmsPortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.4.1.4 | ColumnmsPortStatsFrameErrors | read-only | current | P-bit severely errored seconds |
| 1.3.6.1.4.1.1751.2.18.10.4.1.5 | ColumnmsPortStatsOutOfFrameSeconds | read-only | current | severely errored framing seconds |
| 1.3.6.1.4.1.1751.2.18.10.4.1.6 | ColumnmsPortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.5 | Tablee3PortStatsTable | not-accessible | current | Table of statisics for a E3 port |
| 1.3.6.1.4.1.1751.2.18.10.5.1 | Rowe3PortStatsEntry | not-accessible | current | Row definition for the E3 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.5.1.1 | Columne3PortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.5.1.2 | Columne3PortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.5.1.3 | Columne3PortStatsCurrentSEFSs | read-only | current | severely errored framing seconds |
| 1.3.6.1.4.1.1751.2.18.10.5.1.4 | Columne3PortStatsCurrentLCVs | read-only | current | Line coding violations encountered |
| 1.3.6.1.4.1.1751.2.18.10.5.1.5 | Columne3PortStatsCurrentLESs | read-only | current | Line errored seconds |
| 1.3.6.1.4.1.1751.2.18.10.6 | Tablee1PortStatsTable | not-accessible | current | Table of statisics for a E1 port |
| 1.3.6.1.4.1.1751.2.18.10.6.1 | Rowe1PortStatsEntry | not-accessible | current | Row definition for the E1 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.6.1.1 | Columne1PortStatsId | not-accessible | current | Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.6.1.2 | Columne1PortStatsTimer | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.1751.2.18.10.6.1.3 | Columne1PortStatsCurrentESs | read-only | current | The number of Errored Seconds, encountered by a E1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.6.1.4 | Columne1PortStatsCurrentSESs | read-only | current | The number of Severely Errored Seconds encoun- tered by a E1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.6.1.5 | Columne1PortStatsCurrentLCVs | read-only | current | The number of Line Code Violations (LCVs) en- countered by a E1 interface. |
| 1.3.6.1.4.1.1751.2.18.10.7 | TableethernetPortStatsTable | not-accessible | current | Statisics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.1751.2.18.10.7.1 | RowethernetPortStatsEntry | not-accessible | current | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.1751.2.18.10.7.1.1 | ColumnethernetPortStatsId | not-accessible | current | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.2 | ColumnethernetPortStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.10.7.1.3 | ColumnethernetPortStatsAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.4 | ColumnethernetPortStatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.5 | ColumnethernetPortStatsSingleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.6 | ColumnethernetPortStatsMultipleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.7 | ColumnethernetPortStatsSQETestErrors | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.4.1.1751.2.18.10.7.1.8 | ColumnethernetPortStatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particluar interface is delayed because the medium is busy. the count represented by an instanc… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.9 | ColumnethernetPortStatsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.1751.2.18.10.7.1.10 | ColumnethernetPortStatsExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.1751.2.18.10.7.1.11 | ColumnethernetPortStatsInternalMacTransmitErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.12 | ColumnethernetPortStatsCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.13 | ColumnethernetPortStatsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.1751.2.18.10.7.1.14 | ColumnethernetPortStatsInternalMacReceiveErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.1751.2.18.10.8 | Tableoc3APSPairStatsTable | not-accessible | current | Table of statisics for a OC3 port |
| 1.3.6.1.4.1.1751.2.18.10.8.1 | Rowoc3APSPairStatsEntry | not-accessible | current | Row definition for the OC3 port statistics table |
| 1.3.6.1.4.1.1751.2.18.10.8.1.1 | Columnoc3APSPairStatsId | not-accessible | current | Working Port ID - Slot/Port (SSPP) |
| 1.3.6.1.4.1.1751.2.18.10.8.1.2 | Columnoc3APSPairWorkingSFDuration | read-only | current | Duration in seconds for which the Work port has been in Signal Failure state |
| 1.3.6.1.4.1.1751.2.18.10.8.1.3 | Columnoc3APSPairWorkingSDDuration | read-only | current | Duration in seconds for which the Work port has been in Signal Degradation state |
| 1.3.6.1.4.1.1751.2.18.10.8.1.4 | Columnoc3APSPairProtectionSFDuration | read-only | current | Duration in seconds for which the Prot port has been in Signal Failure state |
| 1.3.6.1.4.1.1751.2.18.10.8.1.5 | Columnoc3APSPairProtectionSDDuration | read-only | current | Duration in seconds for which the Prot port has been in Signal Degradation state |
| 1.3.6.1.4.1.1751.2.18.10.8.1.6 | Columnoc3APSPairTransmitK1K2Bytes | read-only | current | The k1 / k2 bytes being transmitted by the prot port to the remote port. |
| 1.3.6.1.4.1.1751.2.18.10.8.1.7 | Columnoc3APSPairReceiveK1K2Bytes | read-only | current | k1 / k2 bytes from the received SONET header on the protection port. k1 / k2 are used for the APS communication protocol. |
| 1.3.6.1.4.1.1751.2.18.10.8.1.8 | Columnoc3APSPairSwitchOverCount | read-only | current | Number of times the APS pair has switched over since last configuration. |
| 1.3.6.1.4.1.1751.2.18.10.9 | TableviprVpnStatsTable | not-accessible | current | Statistics collected per vpn based |
| 1.3.6.1.4.1.1751.2.18.10.9.1 | RowviprVpnStatsEntry | not-accessible | current | Statistics collected per vpn based |
| 1.3.6.1.4.1.1751.2.18.10.9.1.1 | ColumnviprVpnStatsTimer | read-only | current | A timeout value in which the RS Module must reply to statistics requests. |
| 1.3.6.1.4.1.1751.2.18.10.9.1.2 | ColumnviprVpnStatsIcmpOutEchoRPs | read-only | current | Echo Reply |
| 1.3.6.1.4.1.1751.2.18.10.9.1.3 | ColumnviprVpnStatsIcmpOutDestURs | read-only | current | Destination unreachable |
| 1.3.6.1.4.1.1751.2.18.10.9.1.4 | ColumnviprVpnStatsIcmpOutSrcQ | read-only | current | Source Quenches |
| 1.3.6.1.4.1.1751.2.18.10.9.1.5 | ColumnviprVpnStatsIcmpOutRedirects | read-only | current | Redirect message type |
| 1.3.6.1.4.1.1751.2.18.10.9.1.6 | ColumnviprVpnStatsIcmpOutEchoRQs | read-only | current | Echo Requests |
| 1.3.6.1.4.1.1751.2.18.10.9.1.7 | ColumnviprVpnStatsIcmpOutTimeXs | read-only | current | Time exceeded |
| 1.3.6.1.4.1.1751.2.18.10.9.1.8 | ColumnviprVpnStatsIcmpOutParamps | read-only | current | Parameter problem |
| 1.3.6.1.4.1.1751.2.18.10.9.1.9 | ColumnviprVpnStatsIcmpOutTimeRQs | read-only | current | Timestamp requests |
| 1.3.6.1.4.1.1751.2.18.10.9.1.10 | ColumnviprVpnStatsIcmpOutTimeRPs | read-only | current | Timestamp replies |
| 1.3.6.1.4.1.1751.2.18.10.9.1.11 | ColumnviprVpnStatsIcmpOutInfoRQs | read-only | current | Information Request |
| 1.3.6.1.4.1.1751.2.18.10.9.1.12 | ColumnviprVpnStatsIcmpOutInfoRPs | read-only | current | Echo Reply |
| 1.3.6.1.4.1.1751.2.18.10.9.1.13 | ColumnviprVpnStatsIcmpOutMaskRQs | read-only | current | Mask Request |
| 1.3.6.1.4.1.1751.2.18.10.9.1.14 | ColumnviprVpnStatsIcmpOutMaskRPs | read-only | current | Mask Reply |
| 1.3.6.1.4.1.1751.2.18.10.9.1.15 | ColumnviprVpnStatsIcmpOutErrors | read-only | current | unrecognized ICMP type |
| 1.3.6.1.4.1.1751.2.18.10.9.1.16 | ColumnviprVpnStatsIcmpInErrors | read-only | current | error in received icmp message |
| 1.3.6.1.4.1.1751.2.18.10.9.1.17 | ColumnviprVpnStatsIcmpInEchoRQs | read-only | current | received echo request |
| 1.3.6.1.4.1.1751.2.18.10.9.1.18 | ColumnviprVpnStatsIcmpInAddrMasks | read-only | current | received mask request |
| 1.3.6.1.4.1.1751.2.18.10.9.1.19 | ColumnviprVpnStatsIcmpInAddrMaskReps | read-only | current | received mask reply |
| 1.3.6.1.4.1.1751.2.18.10.9.1.20 | ColumnviprVpnStatsIcmpInEchoReps | read-only | current | received echo replies |
| 1.3.6.1.4.1.1751.2.18.10.9.1.21 | ColumnviprVpnStatsIcmpInDestUnreachs | read-only | current | received destination unreacheable message |
| 1.3.6.1.4.1.1751.2.18.10.9.1.22 | ColumnviprVpnStatsIcmpInSrcQuenchs | read-only | current | received source quench |
| 1.3.6.1.4.1.1751.2.18.10.9.1.23 | ColumnviprVpnStatsIcmpInTimeExcds | read-only | current | received time exceeded message |
| 1.3.6.1.4.1.1751.2.18.10.9.1.24 | ColumnviprVpnStatsIcmpInParamProbs | read-only | current | received parameter problem message |
| 1.3.6.1.4.1.1751.2.18.10.9.1.25 | ColumnviprVpnStatsIcmpInTimeStamps | read-only | current | received time stamp request |
| 1.3.6.1.4.1.1751.2.18.10.9.1.26 | ColumnviprVpnStatsIcmpInTimeStampsReps | read-only | current | received time stamp replies |
| 1.3.6.1.4.1.1751.2.18.11 | NodeintfStatistics | |||
| 1.3.6.1.4.1.1751.2.18.11.1 | TableatmIfStatsTable | not-accessible | current | Table of statistics for an atmUni interface |
| 1.3.6.1.4.1.1751.2.18.11.1.1 | RowatmIfStatsEntry | not-accessible | current | Row definition for the atmUni statistics table |
| 1.3.6.1.4.1.1751.2.18.11.1.1.1 | ColumnatmIfStatsId | not-accessible | current | Interface index (SSPPCCC) to the atmUni statistics table |
| 1.3.6.1.4.1.1751.2.18.11.1.1.2 | ColumnatmIfStatsValidCellsInHi | read-only | current | Number of valid cells received on the channel - High Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.3 | ColumnatmIfStatsValidCellsInLo | read-only | current | Number of valid cells received on the channel - low Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.4 | ColumnatmIfStatsErroredCellsIn | read-only | current | Number of errored cells received on the channel |
| 1.3.6.1.4.1.1751.2.18.11.1.1.5 | ColumnatmIfStatsMismatchedCellsIn | read-only | current | Number of Vpi/Vci translation errors on input cells. |
| 1.3.6.1.4.1.1751.2.18.11.1.1.6 | ColumnatmIfStatsNullCellsOutHi | read-only | current | Number of null cells sent out on the channel - High Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.7 | ColumnatmIfStatsNullCellsOutLo | read-only | current | Number of null cells sent out on the channel - Low Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.8 | ColumnatmIfStatsValidCellsOutHi | read-only | current | Number of valid cells sent out on the channel - High Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.9 | ColumnatmIfStatsValidCellsOutLo | read-only | current | Number of valid cells sent out on the channel - Low Word |
| 1.3.6.1.4.1.1751.2.18.11.1.1.10 | ColumnatmIfStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.2 | TablefrUniStatsTable | not-accessible | current | Table of statistics for a Frame Relay UNI Interface |
| 1.3.6.1.4.1.1751.2.18.11.2.1 | RowfrUniStatsEntry | not-accessible | current | Row definition for the Frame Realy UNI statistics table |
| 1.3.6.1.4.1.1751.2.18.11.2.1.1 | ColumnfrUniStatsId | not-accessible | current | Interface index (SSPPCCC) to the frame relay UNI statistics table |
| 1.3.6.1.4.1.1751.2.18.11.2.1.9 | ColumnfrUniStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.2.1.10 | ColumnfrUniStatsCellsMismatched | read-only | current | number of cells not matched to provisioned DLCIs. |
| 1.3.6.1.4.1.1751.2.18.11.2.1.11 | ColumnfrUniStatsErroredFrames | read-only | current | number of errored frames. |
| 1.3.6.1.4.1.1751.2.18.11.2.1.12 | ColumnfrUniStatsCellsEncodedHi | read-only | current | number of cells encoded - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.13 | ColumnfrUniStatsCellsEncodedLo | read-only | current | number of cells encoded - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.14 | ColumnfrUniStatsFramesEncodedHi | read-only | current | number of frames encoded - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.15 | ColumnfrUniStatsFramesEncodedLo | read-only | current | number of frames encoded - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.16 | ColumnfrUniStatsCellsDecodedHi | read-only | current | number of cells decoded - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.17 | ColumnfrUniStatsCellsDecodedLo | read-only | current | number of cells decoded - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.18 | ColumnfrUniStatsFramesDecodedHi | read-only | current | number of frames decoded - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.19 | ColumnfrUniStatsFramesDecodedLo | read-only | current | number of frames decoded - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.11.2.1.20 | ColumnfrUniStatsAAL5Errors | read-only | current | number of aal5 PDUs with invalid byte count or CRC-32. |
| 1.3.6.1.4.1.1751.2.18.11.3 | TablecirEmIfStatsTable | not-accessible | current | Table of statistics for an cirEm interface |
| 1.3.6.1.4.1.1751.2.18.11.3.1 | RowcirEmIfStatsEntry | not-accessible | current | Row definition for the cirEm statistics table |
| 1.3.6.1.4.1.1751.2.18.11.3.1.1 | ColumncirEmIfStatsId | not-accessible | current | Interface index (SSPPCCC) to the cirEm statistics table |
| 1.3.6.1.4.1.1751.2.18.11.3.1.2 | ColumncirEmIfStatsCellsEncodedHi | read-only | current | Incoming cells from the outside media to the i/o port |
| 1.3.6.1.4.1.1751.2.18.11.3.1.3 | ColumncirEmIfStatsCellsEncodedLo | read-only | current | Incoming cells from the outside media to the i/o port |
| 1.3.6.1.4.1.1751.2.18.11.3.1.4 | ColumncirEmIfStatsCellsDecodedHi | read-only | current | Outgoing cells from the i/o port to the outside media |
| 1.3.6.1.4.1.1751.2.18.11.3.1.5 | ColumncirEmIfStatsCellsDecodedLo | read-only | current | Outgoing cells from the i/o port to the outside media |
| 1.3.6.1.4.1.1751.2.18.11.3.1.6 | ColumncirEmIfStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.4 | TablevbrIfStatsTable | not-accessible | current | Table of statistics for an vbr interface |
| 1.3.6.1.4.1.1751.2.18.11.4.1 | RowvbrIfStatsEntry | not-accessible | current | Row definition for the vbr statistics table |
| 1.3.6.1.4.1.1751.2.18.11.4.1.1 | ColumnvbrIfStatsId | not-accessible | current | Interface index (SSPPCCC) to the vbr statistics table |
| 1.3.6.1.4.1.1751.2.18.11.4.1.2 | ColumnvbrIfStatsCellsEncodedHi | read-only | current | Incoming cells from the outside media to the i/o port |
| 1.3.6.1.4.1.1751.2.18.11.4.1.3 | ColumnvbrIfStatsCellsEncodedLo | read-only | current | Incoming cells from the outside media to the i/o port |
| 1.3.6.1.4.1.1751.2.18.11.4.1.4 | ColumnvbrIfStatsCellsDecodedHi | read-only | current | Outgoing cells from the i/o port to the outside media |
| 1.3.6.1.4.1.1751.2.18.11.4.1.5 | ColumnvbrIfStatsCellsDecodedLo | read-only | current | Outgoing cells from the i/o port to the outside media |
| 1.3.6.1.4.1.1751.2.18.11.4.1.6 | ColumnvbrIfStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.5 | TablefrLmiStatsTable | not-accessible | current | Table of statistics for a Frame Relay LMI Interface |
| 1.3.6.1.4.1.1751.2.18.11.5.1 | RowfrLmiStatsEntry | not-accessible | current | Row definition for the Frame Realy LMI statistics table |
| 1.3.6.1.4.1.1751.2.18.11.5.1.1 | ColumnfrLmiStatsId | not-accessible | current | Interface index (SSPPCCC) to the frame relay LMI statistics table |
| 1.3.6.1.4.1.1751.2.18.11.5.1.2 | ColumnfrLmiStatsEnqRx | read-only | current | number of STATUS ENQ messages received |
| 1.3.6.1.4.1.1751.2.18.11.5.1.3 | ColumnfrLmiStatsEnqTx | read-only | current | number of STATUS ENQ messages transmitted |
| 1.3.6.1.4.1.1751.2.18.11.5.1.4 | ColumnfrLmiStatsStatusRx | read-only | current | number of STATUS messages received |
| 1.3.6.1.4.1.1751.2.18.11.5.1.5 | ColumnfrLmiStatsStatusTx | read-only | current | number of STATUS messages transmitted |
| 1.3.6.1.4.1.1751.2.18.11.5.1.6 | ColumnfrLmiStatsAsyncRx | read-only | current | number of ASYNC STATUS messages received |
| 1.3.6.1.4.1.1751.2.18.11.5.1.7 | ColumnfrLmiStatsAsyncTx | read-only | current | number of ASYNC STATUS messages transmitted |
| 1.3.6.1.4.1.1751.2.18.11.5.1.8 | ColumnfrLmiStatsPktDisc | read-only | current | The number of lmi messages discarded due to invalid length, receive sequence numbers, or other error. |
| 1.3.6.1.4.1.1751.2.18.11.5.1.9 | ColumnfrLmiStatsT391Exp | read-only | current | Link integrity verification polling timer expiry |
| 1.3.6.1.4.1.1751.2.18.11.5.1.10 | ColumnfrLmiStatsT392Exp | read-only | current | Polling verification timer expiry |
| 1.3.6.1.4.1.1751.2.18.11.5.1.11 | ColumnfrLmiStatsLinkReset | read-only | current | Number of times interface operational status was in service after system startup. |
| 1.3.6.1.4.1.1751.2.18.11.5.1.12 | ColumnfrLmiStatsTimer | read-only | current | Time since last reset for statistics - in seconds |
| 1.3.6.1.4.1.1751.2.18.11.6 | TablebridgeStatsTable | not-accessible | current | Table of statistics for a bridge interface. |
| 1.3.6.1.4.1.1751.2.18.11.6.1 | RowbridgeStatsEntry | not-accessible | current | Row definition for the bridge interface statistics table |
| 1.3.6.1.4.1.1751.2.18.11.6.1.1 | ColumnbridgeStatsId | not-accessible | current | Interface index (SSPPCCC) to the bridge |
| 1.3.6.1.4.1.1751.2.18.11.6.1.2 | ColumnbridgeStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.6.1.8 | ColumnbridgeStatsBasePortDelayExceededDiscardsHi | read-only | current | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. … |
| 1.3.6.1.4.1.1751.2.18.11.6.1.9 | ColumnbridgeStatsBasePortDelayExceededDiscardsLo | read-only | current | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. … |
| 1.3.6.1.4.1.1751.2.18.11.6.1.10 | ColumnbridgeStatsBasePortMtuExceededDiscardsHi | read-only | current | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. High-order 32 bits. |
| 1.3.6.1.4.1.1751.2.18.11.6.1.11 | ColumnbridgeStatsBasePortMtuExceededDiscardsLo | read-only | current | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. Low-order 32 bits. |
| 1.3.6.1.4.1.1751.2.18.11.6.1.12 | ColumnbridgeStatsTpPortInFramesHi | read-only | current | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.1751.2.18.11.6.1.13 | ColumnbridgeStatsTpPortInFramesLo | read-only | current | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.1751.2.18.11.6.1.14 | ColumnbridgeStatsTpPortOutFramesHi | read-only | current | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.1751.2.18.11.6.1.15 | ColumnbridgeStatsTpPortOutFramesLo | read-only | current | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.1751.2.18.11.6.1.16 | ColumnbridgeStatsTpPortInDiscardsHi | read-only | current | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. High-order 32 bits. |
| 1.3.6.1.4.1.1751.2.18.11.6.1.17 | ColumnbridgeStatsTpPortInDiscardsLo | read-only | current | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. Low-order 32 bits. |
| 1.3.6.1.4.1.1751.2.18.11.7 | TabledbCirEmIfStatsTable | not-accessible | current | Table of statistics for a dbCirEm interface. |
| 1.3.6.1.4.1.1751.2.18.11.7.1 | RowdbCirEmIfStatsEntry | not-accessible | current | Row definition for the dbCirEm statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.1 | ColumndbCirEmIfStatsId | not-accessible | current | Interface index (SSPPCCC) to the dbCirEm statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.2 | ColumndbCirEmIfStatsCellsEncodedHi | read-only | current | Incoming cells from the outside media to the i/o port. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.3 | ColumndbCirEmIfStatsCellsEncodedLo | read-only | current | Incoming cells from the outside media to the i/o port. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.4 | ColumndbCirEmIfStatsCellsDecodedHi | read-only | current | Outgoing cells from the i/o port to the outside media. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.5 | ColumndbCirEmIfStatsCellsDecodedLo | read-only | current | Outgoing cells from the i/o port to the outside media. |
| 1.3.6.1.4.1.1751.2.18.11.7.1.6 | ColumndbCirEmIfStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.8 | TableatmImaStatsTable | not-accessible | current | Table of statistics for an atmIma interface. |
| 1.3.6.1.4.1.1751.2.18.11.8.1 | RowatmImaStatsEntry | not-accessible | current | Row definition for the atmIma statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.1 | ColumnatmImaStatsId | not-accessible | current | Interface index (SSPPCCC) to the atmIma statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.2 | ColumnatmImaStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.3 | ColumnatmImaStatsImaViolations | read-only | current | ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.4 | ColumnatmImaStatsOifAnomalies | read-only | current | The number of OIF anomalies during non-SES-IMA condition at the near-end. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.5 | ColumnatmImaStatsNeTxNumFailures | read-only | current | The number of times a near-end transmit failure alarm condition has been entered on this link. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.6 | ColumnatmImaStatsNeRxNumFailures | read-only | current | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA). |
| 1.3.6.1.4.1.1751.2.18.11.8.1.7 | ColumnatmImaStatsFeTxNumFailures | read-only | current | The number of times a far-end transmit failure alarm condition has been entered on this link. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.8 | ColumnatmImaStatsFeRxNumFailures | read-only | current | The number of times a far-end receive failure alarm condition has been entered on this link (i.e. LIF, LODS, Mis-Connected, RDI-IMA). |
| 1.3.6.1.4.1.1751.2.18.11.8.1.9 | ColumnatmImaStatsTxStuffs | read-only | current | Counts of stuff events inserted in the transmit direction. |
| 1.3.6.1.4.1.1751.2.18.11.8.1.10 | ColumnatmImaStatsRxStuffs | read-only | current | Counts of stuff events detected in the receive direction. |
| 1.3.6.1.4.1.1751.2.18.11.9 | TableilmiStatsTable | not-accessible | current | Table of statistics for an ILMI enabled interface. |
| 1.3.6.1.4.1.1751.2.18.11.9.1 | RowilmiStatsEntry | not-accessible | current | Row definition for the ILMI statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.1 | ColumnilmiStatsId | not-accessible | current | Interface index (SSPPCCC) for the ILMI interface. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.2 | ColumnilmiStatsTimer | read-only | current | Time, in seconds, since last statistics reset. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.3 | ColumnilmiStatsLinkResets | read-only | current | Times connectivity has toggled between down and up. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.4 | ColumnilmiStatsAttachPtChanged | read-only | current | Times Attachment Point change was detected. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.5 | ColumnilmiStatsAttachPtVerified | read-only | current | Times Attachment Point was verified successfully. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.6 | ColumnilmiStatsSecureLnkProcInit | read-only | current | Times Secure Link Procedure was initiated. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.7 | ColumnilmiStatsColdStartRx | read-only | current | Times Cold Start trap was received. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.8 | ColumnilmiStatsColdStartTx | read-only | current | Times Cold Start trap was transmitted. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.9 | ColumnilmiStatsPduRx | read-only | current | ilmi pdu received |
| 1.3.6.1.4.1.1751.2.18.11.9.1.10 | ColumnilmiStatsPduTx | read-only | current | ilmi pdu transmitted |
| 1.3.6.1.4.1.1751.2.18.11.9.1.11 | ColumnilmiStatsReqTimeouts | read-only | current | Times getRequest of any type timed out. |
| 1.3.6.1.4.1.1751.2.18.11.9.1.12 | ColumnilmiStatsPacketDisc | read-only | current | Times a received packet was discarded. |
| 1.3.6.1.4.1.1751.2.18.11.10 | TableviprStatsTable | not-accessible | current | The table which holds viprStatsEntry data. |
| 1.3.6.1.4.1.1751.2.18.11.10.1 | RowviprStatsEntry | not-accessible | current | A table entry for VPN related statistics information. |
| 1.3.6.1.4.1.1751.2.18.11.10.1.1 | ColumnviprStatsReset | read-write | current | A SNMP set action to reset VPN related statistics info. |
| 1.3.6.1.4.1.1751.2.18.11.10.1.2 | ColumnviprStatsPacketsRxHi | read-only | current | Good packets received from the backplane |
| 1.3.6.1.4.1.1751.2.18.11.10.1.3 | ColumnviprStatsPacketsRxLo | read-only | current | Good packets received from the backplane |
| 1.3.6.1.4.1.1751.2.18.11.10.1.4 | ColumnviprStatsPacketsTxHi | read-only | current | packets transmitted to the backplane |
| 1.3.6.1.4.1.1751.2.18.11.10.1.5 | ColumnviprStatsPacketsTxLo | read-only | current | packets transmitted to the backplane |
| 1.3.6.1.4.1.1751.2.18.11.10.1.6 | ColumnviprStatsMismatchCrcHi | read-only | current | packets received has been dropped due to a mismached CRC |
| 1.3.6.1.4.1.1751.2.18.11.10.1.7 | ColumnviprStatsMismatchCrcLo | read-only | current | packets received has been dropped due to a mismached CRC |
| 1.3.6.1.4.1.1751.2.18.11.10.1.8 | ColumnviprStatsInsufficientPcktsHi | read-only | current | packet received length is greater than the number of cells received |
| 1.3.6.1.4.1.1751.2.18.11.10.1.9 | ColumnviprStatsInsufficientPcktsLo | read-only | current | packet received length is greater than the number of cells received |
| 1.3.6.1.4.1.1751.2.18.11.10.1.10 | ColumnviprStatsExceedAal5CellsHi | read-only | current | number of cells received is greater than the actual length of the aal5 |
| 1.3.6.1.4.1.1751.2.18.11.10.1.11 | ColumnviprStatsExceedAal5CellsLo | read-only | current | number of cells received is greater than the actual length of the aal5 |
| 1.3.6.1.4.1.1751.2.18.11.10.1.12 | ColumnviprStatsPrototypeErrorsHi | read-only | current | unrecognized encapsulation type |
| 1.3.6.1.4.1.1751.2.18.11.10.1.13 | ColumnviprStatsPrototypeErrorsLo | read-only | current | unrecognized encapsulation type |
| 1.3.6.1.4.1.1751.2.18.11.10.1.14 | ColumnviprStatsArpProtoRxHi | read-only | current | ARP received |
| 1.3.6.1.4.1.1751.2.18.11.10.1.15 | ColumnviprStatsArpProtoRxLo | read-only | current | ARP received |
| 1.3.6.1.4.1.1751.2.18.11.10.1.16 | ColumnviprStatsIPInHdrErrorsHi | read-only | current | IP packeted received has a bad header |
| 1.3.6.1.4.1.1751.2.18.11.10.1.17 | ColumnviprStatsIPInHdrErrorsLo | read-only | current | IP packeted received has a bad header |
| 1.3.6.1.4.1.1751.2.18.11.10.1.18 | ColumnviprStatsIPInAddrErrorsHi | read-only | current | IP packeted received has a bad IP Address |
| 1.3.6.1.4.1.1751.2.18.11.10.1.19 | ColumnviprStatsIPInAddrErrorsLo | read-only | current | IP packeted received has a bad IP Address |
| 1.3.6.1.4.1.1751.2.18.11.11 | TablevirtualIntfStatsTable | not-accessible | current | Table of Virtual Interfaces Configurations |
| 1.3.6.1.4.1.1751.2.18.11.11.1 | RowvirtualIntfStatsEntry | not-accessible | current | Index is the Interface and the Virutal Interface |
| 1.3.6.1.4.1.1751.2.18.11.11.1.1 | ColumnvirtualIntfStatsIf | not-accessible | current | Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.11.11.1.2 | ColumnvirtualIntfStatsVi | not-accessible | current | VI value. Def Val is 1 because 0 cannot be configured |
| 1.3.6.1.4.1.1751.2.18.11.11.1.3 | ColumnvirtualIntfStatsEgrCellCount | read-only | current | Egress Cell Count on VI |
| 1.3.6.1.4.1.1751.2.18.11.11.1.4 | ColumnvirtualIntfStatsTimer | read-only | current | Time, in seconds, since last reset. |
| 1.3.6.1.4.1.1751.2.18.11.11.1.5 | ColumnvirtualIntfStatsReset | read-write | current | stats reset field. |
| 1.3.6.1.4.1.1751.2.18.11.12 | TablevuniIlmiStatsTable | not-accessible | current | Table of statistics for an ILMI enabled interface. |
| 1.3.6.1.4.1.1751.2.18.11.12.1 | RowvuniIlmiStatsEntry | not-accessible | current | Row definition for the ILMI statistics table. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.1 | ColumnvuniIlmiStatsId | not-accessible | current | Interface index (SSPPCCC) for the ILMI interface. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.2 | ColumnvuniIlmiVUNIId | not-accessible | current | Virtual UNI number, second index to access the ILMI on virtual UNI interface. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.3 | ColumnvuniIlmiStatsTimer | read-only | current | Time, in seconds, since last statistics reset. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.4 | ColumnvuniIlmiStatsLinkResets | read-only | current | Times connectivity has toggled between down and up. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.5 | ColumnvuniIlmiStatsAttachPtChanged | read-only | current | Times Attachment Point change was detected. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.6 | ColumnvuniIlmiStatsAttachPtVerified | read-only | current | Times Attachment Point was verified successfully. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.7 | ColumnvuniIlmiStatsSecureLnkProcInit | read-only | current | Times Secure Link Procedure was initiated. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.8 | ColumnvuniIlmiStatsColdStartRx | read-only | current | Times Cold Start trap was received. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.9 | ColumnvuniIlmiStatsColdStartTx | read-only | current | Times Cold Start trap was transmitted. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.10 | ColumnvuniIlmiStatsPduRx | read-only | current | vuniIlmi pdu received |
| 1.3.6.1.4.1.1751.2.18.11.12.1.11 | ColumnvuniIlmiStatsPduTx | read-only | current | vuniIlmi pdu transmitted |
| 1.3.6.1.4.1.1751.2.18.11.12.1.12 | ColumnvuniIlmiStatsReqTimeouts | read-only | current | Times getRequest of any type timed out. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.13 | ColumnvuniIlmiStatsPacketDisc | read-only | current | Times a received packet was discarded. |
| 1.3.6.1.4.1.1751.2.18.11.12.1.14 | ColumnvuniResetIlmiStatistics | read-write | current | Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) and vuni Id |
| 1.3.6.1.4.1.1751.2.18.12 | NodeconnectionStatistics | |||
| 1.3.6.1.4.1.1751.2.18.12.1 | TableatmPvcVccStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.1.1 | RowatmPvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.1.1.1 | ColumnatmPvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.1.1.2 | ColumnatmPvcVccStatsVpiA | not-accessible | current | VPI on side A |
| 1.3.6.1.4.1.1751.2.18.12.1.1.3 | ColumnatmPvcVccStatsVciA | not-accessible | current | VCI on side A |
| 1.3.6.1.4.1.1751.2.18.12.1.1.4 | ColumnatmPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.1.1.5 | ColumnatmPvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.1.1.6 | ColumnatmPvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.1.1.7 | ColumnatmPvcVccStatsInCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.8 | ColumnatmPvcVccStatsInCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.9 | ColumnatmPvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.10 | ColumnatmPvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.11 | ColumnatmPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.12 | ColumnatmPvcVccStatsInCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.13 | ColumnatmPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.14 | ColumnatmPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.15 | ColumnatmPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.1.1.16 | ColumnatmPvcVccStatsFrwdErrCrrctnRateA2B | read-only | current | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.12.1.1.17 | ColumnatmPvcVccStatsFrwdErrCrrctnRateB2A | read-only | current | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.12.1.1.18 | ColumnatmPvcVccStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.19 | ColumnatmPvcVccStatsInOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.20 | ColumnatmPvcVccStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.21 | ColumnatmPvcVccStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.22 | ColumnatmPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.23 | ColumnatmPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.24 | ColumnatmPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.25 | ColumnatmPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.1.1.26 | ColumnatmPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.27 | ColumnatmPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.28 | ColumnatmPvcVccStatsOamAisTxA | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.29 | ColumnatmPvcVccStatsOamAisRxA | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.30 | ColumnatmPvcVccStatsOamRdiTxA | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.31 | ColumnatmPvcVccStatsOamRdiRxA | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.32 | ColumnatmPvcVccStatsOamAisTxB | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.33 | ColumnatmPvcVccStatsOamAisRxB | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.34 | ColumnatmPvcVccStatsOamRdiTxB | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.35 | ColumnatmPvcVccStatsOamRdiRxB | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.1.1.36 | ColumnatmPvcVccStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.1.1.37 | ColumnatmPvcVccStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.1.1.38 | ColumnatmPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.1.1.39 | ColumnatmPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.2 | TableatmPvcVpcStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.2.1 | RowatmPvcVpcStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.2.1.1 | ColumnatmPvcVpcStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.2.1.2 | ColumnatmPvcVpcStatsVpiA | not-accessible | current | VPI on side A |
| 1.3.6.1.4.1.1751.2.18.12.2.1.3 | ColumnatmPvcVpcStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.2.1.4 | ColumnatmPvcVpcStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.2.1.5 | ColumnatmPvcVpcStatsInCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.6 | ColumnatmPvcVpcStatsInCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.7 | ColumnatmPvcVpcStatsOutCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.8 | ColumnatmPvcVpcStatsOutCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.9 | ColumnatmPvcVpcStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.10 | ColumnatmPvcVpcStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.11 | ColumnatmPvcVpcStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.12 | ColumnatmPvcVpcStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.13 | ColumnatmPvcVpcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.2.1.14 | ColumnatmPvcVpcStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.15 | ColumnatmPvcVpcStatsInOdometerCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.16 | ColumnatmPvcVpcStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.17 | ColumnatmPvcVpcStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.18 | ColumnatmPvcVpcStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.19 | ColumnatmPvcVpcStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.20 | ColumnatmPvcVpcStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.21 | ColumnatmPvcVpcStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.2.1.22 | ColumnatmPvcVpcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.23 | ColumnatmPvcVpcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.24 | ColumnatmPvcVpcStatsOamAisTxA | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.25 | ColumnatmPvcVpcStatsOamAisRxA | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.26 | ColumnatmPvcVpcStatsOamRdiTxA | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.27 | ColumnatmPvcVpcStatsOamRdiRxA | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.28 | ColumnatmPvcVpcStatsOamAisTxB | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.29 | ColumnatmPvcVpcStatsOamAisRxB | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.30 | ColumnatmPvcVpcStatsOamRdiTxB | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.31 | ColumnatmPvcVpcStatsOamRdiRxB | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.2.1.32 | ColumnatmPvcVpcStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.2.1.33 | ColumnatmPvcVpcStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.2.1.34 | ColumnatmPvcVpcStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.2.1.35 | ColumnatmPvcVpcStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.3 | TableatmSvcVccStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.3.1 | RowatmSvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.3.1.1 | ColumnatmSvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.2 | ColumnatmSvcVccStatsVpiA | not-accessible | current | VPI on side A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.3 | ColumnatmSvcVccStatsVciA | not-accessible | current | VCI on side A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.4 | ColumnatmSvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.5 | ColumnatmSvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.3.1.6 | ColumnatmSvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.3.1.7 | ColumnatmSvcVccStatsInCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.8 | ColumnatmSvcVccStatsInCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.9 | ColumnatmSvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.10 | ColumnatmSvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.11 | ColumnatmSvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.12 | ColumnatmSvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.13 | ColumnatmSvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.14 | ColumnatmSvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.15 | ColumnatmSvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.3.1.16 | ColumnatmSvcVccStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.17 | ColumnatmSvcVccStatsInOdometerCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.18 | ColumnatmSvcVccStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.19 | ColumnatmSvcVccStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.20 | ColumnatmSvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.21 | ColumnatmSvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.22 | ColumnatmSvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.23 | ColumnatmSvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.3.1.24 | ColumnatmSvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.3.1.25 | ColumnatmSvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.3.1.26 | ColumnatmSvcVccStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.27 | ColumnatmSvcVccStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.3.1.28 | ColumnatmSvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.3.1.29 | ColumnatmSvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.4 | TableipAtmAppPvcVccStatsTable | not-accessible | current | Table of Statistics entries |
| 1.3.6.1.4.1.1751.2.18.12.4.1 | RowipAtmAppPvcVccStatsEntry | not-accessible | current | Row definition for statistics attribution. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.1 | ColumnipAtmAppPvcVccStatsDestAddrA | not-accessible | current | Statistics destination IP address |
| 1.3.6.1.4.1.1751.2.18.12.4.1.2 | ColumnipAtmAppPvcVccStatsSubnetMaskA | not-accessible | current | The subnet mask of the destination IP address. Value is an IP address. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.3 | ColumnipAtmAppPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.4.1.4 | ColumnipAtmAppPvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.4.1.5 | ColumnipAtmAppPvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.4.1.6 | ColumnipAtmAppPvcVccStatsInCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.7 | ColumnipAtmAppPvcVccStatsInCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.8 | ColumnipAtmAppPvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.9 | ColumnipAtmAppPvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.10 | ColumnipAtmAppPvcVccStatsFramesInB | read-only | current | number of frames received on side B. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.11 | ColumnipAtmAppPvcVccStatsFramesOutB | read-only | current | number of frames sent from side B. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.12 | ColumnipAtmAppPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.13 | ColumnipAtmAppPvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.14 | ColumnipAtmAppPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.15 | ColumnipAtmAppPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.16 | ColumnipAtmAppPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.4.1.17 | ColumnipAtmAppPvcVccStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.18 | ColumnipAtmAppPvcVccStatsInOdometerCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.19 | ColumnipAtmAppPvcVccStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.20 | ColumnipAtmAppPvcVccStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.21 | ColumnipAtmAppPvcVccStatsOdometerFramesInB | read-only | current | Valid frames received at side B. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.22 | ColumnipAtmAppPvcVccStatsOdometerFramesOutB | read-only | current | Valid frames transmitted from side B. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.23 | ColumnipAtmAppPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.24 | ColumnipAtmAppPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.25 | ColumnipAtmAppPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.26 | ColumnipAtmAppPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.4.1.27 | ColumnipAtmAppPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.28 | ColumnipAtmAppPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.4.1.29 | ColumnipAtmAppPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.4.1.30 | ColumnipAtmAppPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.5 | TableipAtmAppSvcVccStatsTable | not-accessible | current | Table of statistics entries |
| 1.3.6.1.4.1.1751.2.18.12.5.1 | RowipAtmAppSvcVccStatsEntry | not-accessible | current | Row definition of statistics attributes. |
| 1.3.6.1.4.1.1751.2.18.12.5.1.1 | ColumnipAtmAppSvcVccStatsDestAddrA | not-accessible | current | Statistics destination IP address |
| 1.3.6.1.4.1.1751.2.18.12.5.1.2 | ColumnipAtmAppSvcVccStatsSubnetMaskA | not-accessible | current | The subnet mask of the destination IP address. Value is an IP address. |
| 1.3.6.1.4.1.1751.2.18.12.5.1.3 | ColumnipAtmAppSvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.5.1.4 | ColumnipAtmAppSvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.5.1.5 | ColumnipAtmAppSvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.5.1.6 | ColumnipAtmAppSvcVccStatsInCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.7 | ColumnipAtmAppSvcVccStatsInCellCountLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.8 | ColumnipAtmAppSvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.9 | ColumnipAtmAppSvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.10 | ColumnipAtmAppSvcVccStatsFramesInB | read-only | current | Frames received at side B. |
| 1.3.6.1.4.1.1751.2.18.12.5.1.11 | ColumnipAtmAppSvcVccStatsFramesOutB | read-only | current | Frames transmitted from side B. |
| 1.3.6.1.4.1.1751.2.18.12.5.1.12 | ColumnipAtmAppSvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.13 | ColumnipAtmAppSvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.14 | ColumnipAtmAppSvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.15 | ColumnipAtmAppSvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.5.1.16 | ColumnipAtmAppSvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.5.1.17 | ColumnipAtmAppSvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.5.1.18 | ColumnipAtmAppSvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.6 | TablecirEmAtmPvcVccStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.6.1 | RowcirEmAtmPvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.6.1.1 | ColumncirEmAtmPvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.6.1.2 | ColumncirEmAtmPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.6.1.3 | ColumncirEmAtmPvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.6.1.4 | ColumncirEmAtmPvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.6.1.5 | ColumncirEmAtmPvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.6 | ColumncirEmAtmPvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.7 | ColumncirEmAtmPvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.8 | ColumncirEmAtmPvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.9 | ColumncirEmAtmPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.10 | ColumncirEmAtmPvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.11 | ColumncirEmAtmPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.12 | ColumncirEmAtmPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.13 | ColumncirEmAtmPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.6.1.14 | ColumncirEmAtmPvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.15 | ColumncirEmAtmPvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.16 | ColumncirEmAtmPvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.17 | ColumncirEmAtmPvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.18 | ColumncirEmAtmPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.19 | ColumncirEmAtmPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.20 | ColumncirEmAtmPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.21 | ColumncirEmAtmPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.6.1.22 | ColumncirEmAtmPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.23 | ColumncirEmAtmPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.24 | ColumncirEmAtmPvcVccStatsOamAisTx | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.25 | ColumncirEmAtmPvcVccStatsOamAisRx | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.26 | ColumncirEmAtmPvcVccStatsOamRdiTx | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.27 | ColumncirEmAtmPvcVccStatsOamRdiRx | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.6.1.28 | ColumncirEmAtmPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.6.1.29 | ColumncirEmAtmPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.7 | TablefrAtmPvcVccStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.7.1 | RowfrAtmPvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.7.1.1 | ColumnfrAtmPvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.7.1.2 | ColumnfrAtmPvcVccStatsDlciA | not-accessible | current | dlci - side A |
| 1.3.6.1.4.1.1751.2.18.12.7.1.3 | ColumnfrAtmPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.7.1.4 | ColumnfrAtmPvcVccStatsVpiB | not-accessible | current | VPI on side B |
| 1.3.6.1.4.1.1751.2.18.12.7.1.5 | ColumnfrAtmPvcVccStatsVciB | not-accessible | current | VCI on side B |
| 1.3.6.1.4.1.1751.2.18.12.7.1.6 | ColumnfrAtmPvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.7 | ColumnfrAtmPvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.8 | ColumnfrAtmPvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.9 | ColumnfrAtmPvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.10 | ColumnfrAtmPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.11 | ColumnfrAtmPvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.12 | ColumnfrAtmPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.13 | ColumnfrAtmPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.14 | ColumnfrAtmPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.7.1.15 | ColumnfrAtmPvcVccStatsFramesDroppedA | read-only | current | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.16 | ColumnfrAtmPvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.17 | ColumnfrAtmPvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.18 | ColumnfrAtmPvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.19 | ColumnfrAtmPvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.20 | ColumnfrAtmPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.21 | ColumnfrAtmPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.22 | ColumnfrAtmPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.23 | ColumnfrAtmPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.7.1.24 | ColumnfrAtmPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.25 | ColumnfrAtmPvcVccStatsOdometerFramesDroppedA | read-only | current | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.26 | ColumnfrAtmPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.27 | ColumnfrAtmPvcVccStatsOamAisTx | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.28 | ColumnfrAtmPvcVccStatsOamAisRx | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.29 | ColumnfrAtmPvcVccStatsOamRdiTx | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.30 | ColumnfrAtmPvcVccStatsOamRdiRx | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.7.1.31 | ColumnfrAtmPvcVccStatsAal5ErrFramesA | read-only | current | Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.7.1.32 | ColumnfrAtmPvcVccStatsFramesTaggedA | read-only | current | Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.7.1.33 | ColumnfrAtmPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.7.1.34 | ColumnfrAtmPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.8 | TablefrFrPvcStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.8.1 | RowfrFrPvcStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.8.1.1 | ColumnfrFrPvcStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.8.1.2 | ColumnfrFrPvcStatsDlciA | not-accessible | current | dlci - side A |
| 1.3.6.1.4.1.1751.2.18.12.8.1.3 | ColumnfrFrPvcStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.8.1.4 | ColumnfrFrPvcStatsDlciB | not-accessible | current | dlci - side B |
| 1.3.6.1.4.1.1751.2.18.12.8.1.5 | ColumnfrFrPvcStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.6 | ColumnfrFrPvcStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.7 | ColumnfrFrPvcStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.8 | ColumnfrFrPvcStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.9 | ColumnfrFrPvcStatsCellsEncodedHiB | read-only | current | Cells encoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.10 | ColumnfrFrPvcStatsCellsEncodedLoB | read-only | current | Cells encoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.11 | ColumnfrFrPvcStatsCellsDecodedHiB | read-only | current | Cells decoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.12 | ColumnfrFrPvcStatsCellsDecodedLoB | read-only | current | Cells decoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.13 | ColumnfrFrPvcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.8.1.14 | ColumnfrFrPvcStatsFramesDroppedA | read-only | current | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.15 | ColumnfrFrPvcStatsFramesDroppedB | read-only | current | Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.16 | ColumnfrFrPvcStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.17 | ColumnfrFrPvcStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.18 | ColumnfrFrPvcStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.19 | ColumnfrFrPvcStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.20 | ColumnfrFrPvcStatsOdometerCellsEncodedHiB | read-only | current | Cells encoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.21 | ColumnfrFrPvcStatsOdometerCellsEncodedLoB | read-only | current | Cells encoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.22 | ColumnfrFrPvcStatsOdometerCellsDecodedHiB | read-only | current | Cells decoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.23 | ColumnfrFrPvcStatsOdometerCellsDecodedLoB | read-only | current | Cells decoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.8.1.24 | ColumnfrFrPvcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.25 | ColumnfrFrPvcStatsOdometerFramesDroppedA | read-only | current | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.26 | ColumnfrFrPvcStatsOdometerFramesDroppedB | read-only | current | Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.27 | ColumnfrFrPvcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.8.1.28 | ColumnfrFrPvcStatsAal5ErrFramesA | read-only | current | Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.8.1.29 | ColumnfrFrPvcStatsAal5ErrFramesB | read-only | current | Number of Aal5 Errored Frames, which are not dropped due to UPC in B2A dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.8.1.30 | ColumnfrFrPvcStatsFramesTaggedA | read-only | current | Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.8.1.31 | ColumnfrFrPvcStatsFramesTaggedB | read-only | current | Number of Frames tagged due to UPC in B2A dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.12.9 | TablevbrAtmPvcVccStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.9.1 | RowvbrAtmPvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.9.1.1 | ColumnvbrAtmPvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.9.1.2 | ColumnvbrAtmPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.9.1.3 | ColumnvbrAtmPvcVccStatsVpiB | not-accessible | current | vpi - side B |
| 1.3.6.1.4.1.1751.2.18.12.9.1.4 | ColumnvbrAtmPvcVccStatsVciB | not-accessible | current | vci - side B |
| 1.3.6.1.4.1.1751.2.18.12.9.1.5 | ColumnvbrAtmPvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.6 | ColumnvbrAtmPvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.7 | ColumnvbrAtmPvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.8 | ColumnvbrAtmPvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.10 | ColumnvbrAtmPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.11 | ColumnvbrAtmPvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.12 | ColumnvbrAtmPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.13 | ColumnvbrAtmPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.14 | ColumnvbrAtmPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.9.1.15 | ColumnvbrAtmPvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.16 | ColumnvbrAtmPvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.17 | ColumnvbrAtmPvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.18 | ColumnvbrAtmPvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.19 | ColumnvbrAtmPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.20 | ColumnvbrAtmPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.21 | ColumnvbrAtmPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.22 | ColumnvbrAtmPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.9.1.23 | ColumnvbrAtmPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.24 | ColumnvbrAtmPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.25 | ColumnvbrAtmPvcVccStatsOamAisTx | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.26 | ColumnvbrAtmPvcVccStatsOamAisRx | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.27 | ColumnvbrAtmPvcVccStatsOamRdiTx | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.28 | ColumnvbrAtmPvcVccStatsOamRdiRx | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.9.1.29 | ColumnvbrAtmPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.9.1.30 | ColumnvbrAtmPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.10 | TablecirEmCirEmPvcStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.10.1 | RowcirEmCirEmPvcStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.10.1.1 | ColumncirEmCirEmPvcStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.10.1.2 | ColumncirEmCirEmPvcStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.10.1.3 | ColumncirEmCirEmPvcStatsCellsEncodedHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.4 | ColumncirEmCirEmPvcStatsCellsEncodedLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.5 | ColumncirEmCirEmPvcStatsCellsDecodedHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.6 | ColumncirEmCirEmPvcStatsCellsDecodedLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.7 | ColumncirEmCirEmPvcStatsCellsEncodedHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.8 | ColumncirEmCirEmPvcStatsCellsEncodedLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.9 | ColumncirEmCirEmPvcStatsCellsDecodedHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.10 | ColumncirEmCirEmPvcStatsCellsDecodedLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.11 | ColumncirEmCirEmPvcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.10.1.12 | ColumncirEmCirEmPvcStatsOdometerCellsEncodedHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.13 | ColumncirEmCirEmPvcStatsOdometerCellsEncodedLoA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.14 | ColumncirEmCirEmPvcStatsOdometerCellsDecodedHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.15 | ColumncirEmCirEmPvcStatsOdometerCellsDecodedLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.16 | ColumncirEmCirEmPvcStatsOdometerCellsEncodedHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.17 | ColumncirEmCirEmPvcStatsOdometerCellsEncodedLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.18 | ColumncirEmCirEmPvcStatsOdometerCellsDecodedHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.19 | ColumncirEmCirEmPvcStatsOdometerCellsDecodedLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.10.1.20 | ColumncirEmCirEmPvcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.10.1.21 | ColumncirEmCirEmPvcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.11 | TablevbrVbrPvcStatsTable | not-accessible | current | Table of statistics for a channel connection |
| 1.3.6.1.4.1.1751.2.18.12.11.1 | RowvbrVbrPvcStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.11.1.1 | ColumnvbrVbrPvcStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.11.1.2 | ColumnvbrVbrPvcStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.11.1.4 | ColumnvbrVbrPvcStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.5 | ColumnvbrVbrPvcStatsCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.6 | ColumnvbrVbrPvcStatsCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.7 | ColumnvbrVbrPvcStatsCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.9 | ColumnvbrVbrPvcStatsCellsEncodedHiB | read-only | current | Cells encoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.10 | ColumnvbrVbrPvcStatsCellsEncodedLoB | read-only | current | Cells encoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.11 | ColumnvbrVbrPvcStatsCellsDecodedHiB | read-only | current | Cells decoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.12 | ColumnvbrVbrPvcStatsCellsDecodedLoB | read-only | current | Cells decoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.13 | ColumnvbrVbrPvcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.11.1.14 | ColumnvbrVbrPvcStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.15 | ColumnvbrVbrPvcStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.16 | ColumnvbrVbrPvcStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.17 | ColumnvbrVbrPvcStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.18 | ColumnvbrVbrPvcStatsOdometerCellsEncodedHiB | read-only | current | Cells encoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.19 | ColumnvbrVbrPvcStatsOdometerCellsEncodedLoB | read-only | current | Cells encoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.20 | ColumnvbrVbrPvcStatsOdometerCellsDecodedHiB | read-only | current | Cells decoded on side B- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.21 | ColumnvbrVbrPvcStatsOdometerCellsDecodedLoB | read-only | current | Cells decoded on side B- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.11.1.22 | ColumnvbrVbrPvcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.11.1.23 | ColumnvbrVbrPvcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.12 | TablebridgeBridgePvcStatsTable | not-accessible | current | Table of bridge-bridge PVC connection statistics |
| 1.3.6.1.4.1.1751.2.18.12.12.1 | RowbridgeBridgePvcStatsEntry | not-accessible | current | Row definition of statistics attributes |
| 1.3.6.1.4.1.1751.2.18.12.12.1.1 | ColumnbridgeBridgePvcStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.12.1.2 | ColumnbridgeBridgePvcStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.12.1.3 | ColumnbridgeBridgePvcStatsCellsEncodedHiA | read-only | current | Cells encoded on side A - (High order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.4 | ColumnbridgeBridgePvcStatsCellsEncodedLoA | read-only | current | Cells encoded on side A - ( Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.5 | ColumnbridgeBridgePvcStatsCellsDecodedHiA | read-only | current | Cells decoded on side A - ( High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.6 | ColumnbridgeBridgePvcStatsCellsDecodedLoA | read-only | current | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.7 | ColumnbridgeBridgePvcStatsCellsEncodedHiB | read-only | current | Cells encoded on side B - (High order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.8 | ColumnbridgeBridgePvcStatsCellsEncodedLoB | read-only | current | Cells encoded on side B - (Low order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.9 | ColumnbridgeBridgePvcStatsCellsDecodedHiB | read-only | current | Cells decoded on side B - (High order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.10 | ColumnbridgeBridgePvcStatsCellsDecodedLoB | read-only | current | Cells decoded on side B -(Low order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.11 | ColumnbridgeBridgePvcStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.12.1.12 | ColumnbridgeBridgePvcStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.13 | ColumnbridgeBridgePvcStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.14 | ColumnbridgeBridgePvcStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.15 | ColumnbridgeBridgePvcStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.16 | ColumnbridgeBridgePvcStatsOdometerCellsEncodedHiB | read-only | current | Cells encoded on side B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.17 | ColumnbridgeBridgePvcStatsOdometerCellsEncodedLoB | read-only | current | Cells encoded on side B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.18 | ColumnbridgeBridgePvcStatsOdometerCellsDecodedHiB | read-only | current | Cells decoded on side B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.19 | ColumnbridgeBridgePvcStatsOdometerCellsDecodedLoB | read-only | current | Cells decoded on side B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.12.1.20 | ColumnbridgeBridgePvcStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.12.1.21 | ColumnbridgeBridgePvcStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.13 | TablebridgeAtmPvcVccStatsTable | not-accessible | current | Table of statisics |
| 1.3.6.1.4.1.1751.2.18.12.13.1 | RowbridgeAtmPvcVccStatsEntry | not-accessible | current | Row definition for the connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.13.1.1 | ColumnbridgeAtmPvcVccStatsIfA | not-accessible | current | Interface index (SSPPCCC) on side A |
| 1.3.6.1.4.1.1751.2.18.12.13.1.2 | ColumnbridgeAtmPvcVccStatsIfB | not-accessible | current | Interface index (SSPPCCC) on side B |
| 1.3.6.1.4.1.1751.2.18.12.13.1.3 | ColumnbridgeAtmPvcVccStatsVpiB | not-accessible | current | vpi - side B |
| 1.3.6.1.4.1.1751.2.18.12.13.1.4 | ColumnbridgeAtmPvcVccStatsVciB | not-accessible | current | vci - side B |
| 1.3.6.1.4.1.1751.2.18.12.13.1.5 | ColumnbridgeAtmPvcVccStatsCellsEncodedHiA | read-only | current | number of cells encoded on side A - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.12.13.1.6 | ColumnbridgeAtmPvcVccStatsCellsEncodedLoA | read-only | current | number of cells encoded on side A - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.12.13.1.7 | ColumnbridgeAtmPvcVccStatsCellsDecodedHiA | read-only | current | number of cells decoded on side A - (High order portion). |
| 1.3.6.1.4.1.1751.2.18.12.13.1.8 | ColumnbridgeAtmPvcVccStatsCellsDecodedLoA | read-only | current | number of cells decoded on side A - (Low order portion). |
| 1.3.6.1.4.1.1751.2.18.12.13.1.9 | ColumnbridgeAtmPvcVccStatsInCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.10 | ColumnbridgeAtmPvcVccStatsInCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.11 | ColumnbridgeAtmPvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.12 | ColumnbridgeAtmPvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.13 | ColumnbridgeAtmPvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.13.1.14 | ColumnbridgeAtmPvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.15 | ColumnbridgeAtmPvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.16 | ColumnbridgeAtmPvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.17 | ColumnbridgeAtmPvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.18 | ColumnbridgeAtmPvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.19 | ColumnbridgeAtmPvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.20 | ColumnbridgeAtmPvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.21 | ColumnbridgeAtmPvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.13.1.22 | ColumnbridgeAtmPvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.23 | ColumnbridgeAtmPvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.24 | ColumnbridgeAtmPvcVccStatsOamAisTx | read-only | current | Number of AIS cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.25 | ColumnbridgeAtmPvcVccStatsOamAisRx | read-only | current | Number of AIS cells received. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.26 | ColumnbridgeAtmPvcVccStatsOamRdiTx | read-only | current | Number of RDI cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.27 | ColumnbridgeAtmPvcVccStatsOamRdiRx | read-only | current | Number of RDI cells received. |
| 1.3.6.1.4.1.1751.2.18.12.13.1.28 | ColumnbridgeAtmPvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.13.1.29 | ColumnbridgeAtmPvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.14 | TablecirEmAtmSpvcVccStatsTable | not-accessible | current | Table of statistics for a CES SPVC channel connection |
| 1.3.6.1.4.1.1751.2.18.12.14.1 | RowcirEmAtmSpvcVccStatsEntry | not-accessible | current | Row definition for the CES SPVC connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.14.1.1 | ColumncirEmAtmSpvcVccStatsIfA | not-accessible | current | Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form… |
| 1.3.6.1.4.1.1751.2.18.12.14.1.2 | ColumncirEmAtmSpvcVccStatsIfB | not-accessible | current | Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.12.14.1.3 | ColumncirEmAtmSpvcVccStatsVpiB | not-accessible | current | VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.12.14.1.4 | ColumncirEmAtmSpvcVccStatsVciB | not-accessible | current | VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.12.14.1.5 | ColumncirEmAtmSpvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A - (High order portion ) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.6 | ColumncirEmAtmSpvcVccStatsCellsEncodedLoA | read-only | current | Cells encoded on side A - ( Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.7 | ColumncirEmAtmSpvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A - ( High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.8 | ColumncirEmAtmSpvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.9 | ColumncirEmAtmSpvcVccStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.10 | ColumncirEmAtmSpvcVccStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.11 | ColumncirEmAtmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.12 | ColumncirEmAtmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.13 | ColumncirEmAtmSpvcVccStatsTimer | read-only | current | Number of seconds since stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.14.1.14 | ColumncirEmAtmSpvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.15 | ColumncirEmAtmSpvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.16 | ColumncirEmAtmSpvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.17 | ColumncirEmAtmSpvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.18 | ColumncirEmAtmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.19 | ColumncirEmAtmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.20 | ColumncirEmAtmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.21 | ColumncirEmAtmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.14.1.22 | ColumncirEmAtmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.14.1.23 | ColumncirEmAtmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.14.1.24 | ColumncirEmAtmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.14.1.25 | ColumncirEmAtmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.15 | TablevbrAtmSpvcVccStatsTable | not-accessible | current | Table of statistics for a TE SPVC channel connection. |
| 1.3.6.1.4.1.1751.2.18.12.15.1 | RowvbrAtmSpvcVccStatsEntry | not-accessible | current | Row definition for the TE SPVC connection statistics table. |
| 1.3.6.1.4.1.1751.2.18.12.15.1.1 | ColumnvbrAtmSpvcVccStatsIfA | not-accessible | current | Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form… |
| 1.3.6.1.4.1.1751.2.18.12.15.1.2 | ColumnvbrAtmSpvcVccStatsIfB | not-accessible | current | Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, whe… |
| 1.3.6.1.4.1.1751.2.18.12.15.1.3 | ColumnvbrAtmSpvcVccStatsVpiB | not-accessible | current | VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.12.15.1.4 | ColumnvbrAtmSpvcVccStatsVciB | not-accessible | current | VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.12.15.1.5 | ColumnvbrAtmSpvcVccStatsCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.6 | ColumnvbrAtmSpvcVccStatsCellsEncodedLoA | read-only | current | ells encoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.7 | ColumnvbrAtmSpvcVccStatsCellsDecodedHiA | read-only | current | Cells decoded on side A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.8 | ColumnvbrAtmSpvcVccStatsCellsDecodedLoA | read-only | current | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.9 | ColumnvbrAtmSpvcVccStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.10 | ColumnvbrAtmSpvcVccStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.11 | ColumnvbrAtmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.12 | ColumnvbrAtmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.13 | ColumnvbrAtmSpvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.15.1.14 | ColumnvbrAtmSpvcVccStatsOdometerCellsEncodedHiA | read-only | current | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.15 | ColumnvbrAtmSpvcVccStatsOdometerCellsEncodedLoA | read-only | current | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.16 | ColumnvbrAtmSpvcVccStatsOdometerCellsDecodedHiA | read-only | current | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.17 | ColumnvbrAtmSpvcVccStatsOdometerCellsDecodedLoA | read-only | current | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.18 | ColumnvbrAtmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.19 | ColumnvbrAtmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.20 | ColumnvbrAtmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid Cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.21 | ColumnvbrAtmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid Cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.15.1.22 | ColumnvbrAtmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.15.1.23 | ColumnvbrAtmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.15.1.24 | ColumnvbrAtmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.15.1.25 | ColumnvbrAtmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.16 | TableatmSpvcVccStatsTable | not-accessible | current | Table of statistics for a ATM SPVC channel connection |
| 1.3.6.1.4.1.1751.2.18.12.16.1 | RowatmSpvcVccStatsEntry | not-accessible | current | Row definition for the ATM SPVC connection statistics table |
| 1.3.6.1.4.1.1751.2.18.12.16.1.1 | ColumnatmSpvcVccStatsIfA | not-accessible | current | Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.12.16.1.2 | ColumnatmSpvcVccStatsVpiA | not-accessible | current | VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.3 | ColumnatmSpvcVccStatsVciA | not-accessible | current | VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.4 | ColumnatmSpvcVccStatsIfB | not-accessible | current | Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP… |
| 1.3.6.1.4.1.1751.2.18.12.16.1.5 | ColumnatmSpvcVccStatsVpiB | not-accessible | current | VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.6 | ColumnatmSpvcVccStatsVciB | not-accessible | current | VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.7 | ColumnatmSpvcVccStatsInCellCountHiA | read-only | current | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.8 | ColumnatmSpvcVccStatsInCellCountLoA | read-only | current | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.9 | ColumnatmSpvcVccStatsOutCellCountHiA | read-only | current | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.10 | ColumnatmSpvcVccStatsOutCellCountLoA | read-only | current | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.11 | ColumnatmSpvcVccStatsInCellCountHiB | read-only | current | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.12 | ColumnatmSpvcVccStatsInCellCountLoB | read-only | current | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.13 | ColumnatmSpvcVccStatsOutCellCountHiB | read-only | current | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.14 | ColumnatmSpvcVccStatsOutCellCountLoB | read-only | current | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.15 | ColumnatmSpvcVccStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.16.1.16 | ColumnatmSpvcVccStatsFrwdErrCrrctnRateA2B | read-only | current | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.12.16.1.17 | ColumnatmSpvcVccStatsFrwdErrCrrctnRateB2A | read-only | current | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other case… |
| 1.3.6.1.4.1.1751.2.18.12.16.1.18 | ColumnatmSpvcVccStatsInOdometerCellCountHiA | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.19 | ColumnatmSpvcVccStatsInOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.20 | ColumnatmSpvcVccStatsOutOdometerCellCountHiA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.21 | ColumnatmSpvcVccStatsOutOdometerCellCountLoA | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.22 | ColumnatmSpvcVccStatsInOdometerCellCountHiB | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.23 | ColumnatmSpvcVccStatsInOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.24 | ColumnatmSpvcVccStatsOutOdometerCellCountHiB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.25 | ColumnatmSpvcVccStatsOutOdometerCellCountLoB | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.12.16.1.26 | ColumnatmSpvcVccStatsOdometerTimer | read-only | current | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.27 | ColumnatmSpvcVccStatsOdometerReset | read-write | current | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.12.16.1.28 | ColumnatmSpvcVccStatsCellsDroppedA | read-only | current | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.16.1.29 | ColumnatmSpvcVccStatsCellsTaggedA | read-only | current | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.12.16.1.30 | ColumnatmSpvcVccStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.16.1.31 | ColumnatmSpvcVccStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.17 | TableviprSubChnlStatsTable | not-accessible | current | The table which holds viprSubChnlStatsEntry data. |
| 1.3.6.1.4.1.1751.2.18.12.17.1 | RowviprSubChnlStatsEntry | not-accessible | current | A table entry that contains IP interface sub channel statistics. |
| 1.3.6.1.4.1.1751.2.18.12.17.1.1 | ColumnviprSubChnlStatsInCellCountHiA | read-only | current | cells received on rt interface from another conn |
| 1.3.6.1.4.1.1751.2.18.12.17.1.2 | ColumnviprSubChnlStatsInCellCountLoA | read-only | current | cells received on rt interface from another conn |
| 1.3.6.1.4.1.1751.2.18.12.17.1.3 | ColumnviprSubChnlStatsOutCellCountHiA | read-only | current | cells sent out of a rt interface to another dest |
| 1.3.6.1.4.1.1751.2.18.12.17.1.4 | ColumnviprSubChnlStatsOutCellCountLoA | read-only | current | cells sent out of a rt interface to another dest |
| 1.3.6.1.4.1.1751.2.18.12.17.1.5 | ColumnviprSubChnlStatsInCellCountHiB | read-only | current | cells received on atm/fr/bridge physical interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.6 | ColumnviprSubChnlStatsInCellCountLoB | read-only | current | cells received on atm/fr/bridge physical interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.7 | ColumnviprSubChnlStatsOutCellCountHiB | read-only | current | cell transmitted out of a physical atm/fr/bridge interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.8 | ColumnviprSubChnlStatsOutCellCountLoB | read-only | current | cell transmitted out of a physical atm/fr/bridge interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.9 | ColumnviprSubChnlStatsTimer | read-only | current | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.17.1.10 | ColumnviprSubChnlStatsInOdometerCellCountHiA | read-only | current | odometer cells received on rt interface from another conn |
| 1.3.6.1.4.1.1751.2.18.12.17.1.11 | ColumnviprSubChnlStatsInOdometerCellCountLoA | read-only | current | odometer cells received on rt interface from another conn |
| 1.3.6.1.4.1.1751.2.18.12.17.1.12 | ColumnviprSubChnlStatsOutOdometerCellCountHiA | read-only | current | odometer cells sent out of a rt interface to another dest |
| 1.3.6.1.4.1.1751.2.18.12.17.1.13 | ColumnviprSubChnlStatsOutOdometerCellCountLoA | read-only | current | odometer cells sent out of a rt interface to another dest |
| 1.3.6.1.4.1.1751.2.18.12.17.1.14 | ColumnviprSubChnlStatsInOdometerCellCountHiB | read-only | current | odometer cells received on atm/fr/bridge physical interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.15 | ColumnviprSubChnlStatsInOdometerCellCountLoB | read-only | current | odometer cells received on atm/fr/bridge physical interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.16 | ColumnviprSubChnlStatsOutOdometerCellCountHiB | read-only | current | odometer cells transmitted out of a physical atm/fr/bridge interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.17 | ColumnviprSubChnlStatsOutOdometerCellCountLoB | read-only | current | odometer cells transmitted out of a physical atm/fr/bridge interface |
| 1.3.6.1.4.1.1751.2.18.12.17.1.18 | ColumnviprSubChnlStatsOdometerTimer | read-only | current | Odometer Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.12.17.1.19 | ColumnviprSubChnlStatsOdometerReset | read-write | current | to reset the subchannel statistics |
| 1.3.6.1.4.1.1751.2.18.12.17.1.20 | ColumnviprSubChnlStatsCellsDroppedB | read-only | current | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.12.17.1.21 | ColumnviprSubChnlStatsCellsTaggedB | read-only | current | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.13 | NodeipAtmGroup | |||
| 1.3.6.1.4.1.1751.2.18.13.1 | ScalaripAtmArpSrvConnType | read-write | current | type of Arp Server connection |
| 1.3.6.1.4.1.1751.2.18.13.2 | ScalaripAtmIpAddr | read-write | current | Local IP Address |
| 1.3.6.1.4.1.1751.2.18.13.3 | ScalaripAtmIpMask | read-write | current | Local IP Mask |
| 1.3.6.1.4.1.1751.2.18.13.4 | TableatmArpTable | not-accessible | current | ARP Table |
| 1.3.6.1.4.1.1751.2.18.13.4.1 | RowatmArpEntry | not-accessible | current | ARP Table entry |
| 1.3.6.1.4.1.1751.2.18.13.4.1.1 | ColumnatmArpIpAddress | not-accessible | current | IP address of the IP host described in APR table entry. |
| 1.3.6.1.4.1.1751.2.18.13.4.1.2 | ColumnatmArpAtmAddress | read-write | current | ATM address of the IP host. |
| 1.3.6.1.4.1.1751.2.18.13.4.1.3 | ColumnatmArpAddrType | read-write | current | Type of ATM address value of atmArp address. |
| 1.3.6.1.4.1.1751.2.18.13.4.1.4 | ColumnatmArpEntryState | read-only | current | State of this entry. |
| 1.3.6.1.4.1.1751.2.18.13.4.1.5 | ColumnatmArpEntryRowStatus | read-write | current | RowStatus of this entry. |
| 1.3.6.1.4.1.1751.2.18.13.5 | TableappIpRouteTable | not-accessible | current | Application IP Routing table. |
| 1.3.6.1.4.1.1751.2.18.13.5.1 | RowappIpRouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.1751.2.18.13.5.1.1 | ColumnappIpRouteDest | not-accessible | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is not valid route. |
| 1.3.6.1.4.1.1751.2.18.13.5.1.2 | ColumnappIpRouteMask | not-accessible | current | Mask for Ip route, usefull only for SENS stack VxWorks |
| 1.3.6.1.4.1.1751.2.18.13.5.1.3 | ColumnappIpRouteMetric1 | not-accessible | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes appIpRouteProto value. I… |
| 1.3.6.1.4.1.1751.2.18.13.5.1.4 | ColumnappIpRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.1751.2.18.13.5.1.5 | ColumnappIpRouteState | read-only | current | Current state of route |
| 1.3.6.1.4.1.1751.2.18.14 | NodeiispRouting | |||
| 1.3.6.1.4.1.1751.2.18.14.1 | TableiispCbrRoutTable | not-accessible | current | IISP CBR Routing Table |
| 1.3.6.1.4.1.1751.2.18.14.1.1 | RowiispCbrRoutEntry | not-accessible | current | IISP CBR Table Entry |
| 1.3.6.1.4.1.1751.2.18.14.1.1.1 | ColumniispCbrRoutLength | not-accessible | current | length in bits |
| 1.3.6.1.4.1.1751.2.18.14.1.1.2 | ColumniispCbrRoutNsapAddr | not-accessible | current | nsap address |
| 1.3.6.1.4.1.1751.2.18.14.1.1.3 | ColumniispCbrRoutIfIndex | read-write | current | Interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.14.1.1.4 | ColumniispCbrRoutRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.14.2 | TableiispVbrRoutTable | not-accessible | current | IISP CBR Routing Table |
| 1.3.6.1.4.1.1751.2.18.14.2.1 | RowiispVbrRoutEntry | not-accessible | current | IISP CBR Table Entry |
| 1.3.6.1.4.1.1751.2.18.14.2.1.1 | ColumniispVbrRoutLength | not-accessible | current | length in bits |
| 1.3.6.1.4.1.1751.2.18.14.2.1.2 | ColumniispVbrRoutNsapAddr | not-accessible | current | nsap address |
| 1.3.6.1.4.1.1751.2.18.14.2.1.3 | ColumniispVbrRoutIfIndex | read-write | current | Interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.14.2.1.4 | ColumniispVbrRoutRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.14.3 | TableiispCbrRouteTable | not-accessible | current | IISP CBR Routing Table |
| 1.3.6.1.4.1.1751.2.18.14.3.1 | RowiispCbrRouteEntry | not-accessible | current | IISP CBR Route Entry |
| 1.3.6.1.4.1.1751.2.18.14.3.1.1 | ColumniispCbrRouteLength | not-accessible | current | length in bits |
| 1.3.6.1.4.1.1751.2.18.14.3.1.2 | ColumniispCbrRouteNsapAddr | not-accessible | current | nsap address |
| 1.3.6.1.4.1.1751.2.18.14.3.1.3 | ColumniispCbrRouteIfIndex | not-accessible | current | Interface index - SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.14.3.1.4 | ColumniispCbrRouteRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.14.3.1.5 | ColumniispCbrRouteIfVuniId | not-accessible | current | Virtual UNI interface VUNI Id |
| 1.3.6.1.4.1.1751.2.18.14.3.1.6 | ColumniispCbrRouteType | read-write | current | Type of Route, Categorisation of an Endpoint Route or an intermediate Route |
| 1.3.6.1.4.1.1751.2.18.14.3.1.7 | ColumniispCbrRouteDest | read-write | current | Type of Destination, Categorisation of an Endpoint destination or an intermediate destination |
| 1.3.6.1.4.1.1751.2.18.14.4 | TableiispVbrRouteTable | not-accessible | current | IISP CBR Routing Table |
| 1.3.6.1.4.1.1751.2.18.14.4.1 | RowiispVbrRouteEntry | not-accessible | current | IISP CBR Table Entry |
| 1.3.6.1.4.1.1751.2.18.14.4.1.1 | ColumniispVbrRouteLength | not-accessible | current | length in bits |
| 1.3.6.1.4.1.1751.2.18.14.4.1.2 | ColumniispVbrRouteNsapAddr | not-accessible | current | nsap address |
| 1.3.6.1.4.1.1751.2.18.14.4.1.3 | ColumniispVbrRouteIfIndex | not-accessible | current | In most cases, it is the I/O Interface index - SSPPCCC. However, in case of ATM Trunking's Narrowband routing and Broadband routing, this is either the CAS tru… |
| 1.3.6.1.4.1.1751.2.18.14.4.1.4 | ColumniispVbrRouteRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.14.4.1.5 | ColumniispVbrRouteIfVuniId | not-accessible | current | Virtual UNI interface VUNI Id |
| 1.3.6.1.4.1.1751.2.18.14.4.1.6 | ColumniispVbrRouteType | read-write | current | Type of Route, Categorisation of an Endpoint Route or an intermediate Route |
| 1.3.6.1.4.1.1751.2.18.14.4.1.7 | ColumniispVbrRouteDest | read-write | current | Type of Destination, Categorisation of an Endpoint destination or an intermediate destination |
| 1.3.6.1.4.1.1751.2.18.15 | NodereturnCode | |||
| 1.3.6.1.4.1.1751.2.18.15.1 | ScalarpvcFailureReasonCode | read-only | current | An identified reason why an ATM PVC connection request failed. aal2CuTimerOutOfRange(298): this error code is generated when the aal2CuTimer value is out of ra… |
| 1.3.6.1.4.1.1751.2.18.15.2 | ScalarinterfaceIndex | read-only | current | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port nu… |
| 1.3.6.1.4.1.1751.2.18.15.3 | ScalarinterfaceType | read-only | current | Interface type used for identification in traps. A specific interface is associated with each number. atmUni3-0(1) ATM User Network Interface version 3.0 atmUn… |
| 1.3.6.1.4.1.1751.2.18.15.4 | ScalarinterfaceFailureReasonCode | read-only | current | Identification of cause for failure in changing the status of an interface. interfaceInService(1) Most, if not all, modifications require that the interface be… |
| 1.3.6.1.4.1.1751.2.18.15.5 | ScalarpowerSupplyReasonCode | read-only | current | Identification for change in status of a power supply. overload(1) overload overloadCleared(2) overload cleared plus5vFailed(3) +5V power supply failed plus5vC… |
| 1.3.6.1.4.1.1751.2.18.15.6 | ScalarportId | read-only | current | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and PP is the port number. |
| 1.3.6.1.4.1.1751.2.18.15.7 | ScalarlineStatus | read-only | current | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | ScalarfirmwareDownloadReasonCode | read-only | current | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | ScalarremoteRebootReasonCode | read-only | current | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | ScalarsaveConfigurationReasonCode | read-only | current | The result of a save configuration request. equipment-OK(1) - Save of equipment configuration completed. equipment-Fail-VersionControlInProgress(2) - Save of e… |
| 1.3.6.1.4.1.1751.2.18.15.11 | ScalarversionConfigurationReasonCode | read-only | current | Indicated status and results of version changing. upgrade-Start(1) upgrade starts upgrade-Completed(2) upgrade completed upgrade-Fail(3) upgrade failed downgra… |
| 1.3.6.1.4.1.1751.2.18.15.12 | ScalarpercentComplete | read-only | current | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ScalaripTypeReasonCode | read-only | current | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | ScalartimingReasonCode | read-only | current | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | ScalaralarmCardReasonCode | read-only | current | Configuration status of the alarm inputs and outputs. cutoff - alarm turned off. There are two ways to turn off the audible alarm, locally via the pushbutton s… |
| 1.3.6.1.4.1.1751.2.18.15.16 | ScalarremoveConfigFiles | read-only | current | Used to indicate the status of a remove configuration files request. from-PrimaryCPU(1) configuration files are removed from primary CPU from-BackupCPU(2) conf… |
| 1.3.6.1.4.1.1751.2.18.15.17 | ScalarspvcConfigFailureCode | read-only | current | An identified reason for failure while configuring/modifying SPVC parameters. noSpvcConfigured(1) : There endpoint has not been configured as SPVC, so SPVC par… |
| 1.3.6.1.4.1.1751.2.18.15.18 | ScalarimaGrpChannelStatus | read-only | current | The return value for the imaGrpChannelFailNotify trap. startupFe(1) Far-end is in the state of start-up cfgAbort(2) this state is entered when the far-end trie… |
| 1.3.6.1.4.1.1751.2.18.15.19 | ScalaratmImaIntfStatus | read-only | current | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the same far-end as the other… |
| 1.3.6.1.4.1.1751.2.18.15.20 | ScalardeviceId | read-only | current | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | ScalaroamTestFailureReasonCode | read-only | current | An identified reason why an OAM Loopback Test request has failed. invalidSPCforOAM: There is no such slot/port/channel in this box. invalidIntfForOAM: There is… |
| 1.3.6.1.4.1.1751.2.18.15.22 | ScalarpnniCode | read-only | current | An identified reason for Miscellaneous Reasons in PNNI Configuration pnniInvEndSysPortId(1) : Invalid EndSystem PortId. pnniNodeAdmStatNotUp(2) : Admin Status … |
| 1.3.6.1.4.1.1751.2.18.15.23 | ScalarswtchNodeIndx | read-only | current | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | Scalaroc3APSPairPortIndex | not-accessible | current | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | Scalaroc3APSReasonCode | read-only | current | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line local - near-end remote - far-end working - working port protect - prote… |
| 1.3.6.1.4.1.1751.2.18.15.26 | Scalaroc3APSK1K2Rx | read-only | current | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | Scalaroc3APSK1K2Tx | read-only | current | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | Scalaroc3APSSelectorState | read-only | current | Working port: active/standby Protection port: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | Scalaroc3APSWorkingLineSignalStatus | read-only | current | Line Status of the working port sent in a trap enumeration explanations are the same as those of oc3APSProtectionLineSignalStatus |
| 1.3.6.1.4.1.1751.2.18.15.30 | Scalaroc3APSProtectionLineSignalStatus | read-only | current | Line Status of the protection port sent in a trap. noAlarm(1) no alarm signalDegradation(2) signal bit error rate is higher than the specified threshold signal… |
| 1.3.6.1.4.1.1751.2.18.15.31 | ScalararpStatus | read-only | current | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again aft… |
| 1.3.6.1.4.1.1751.2.18.15.32 | ScalarroutingStatus | read-only | current | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again… |
| 1.3.6.1.4.1.1751.2.18.15.33 | ScalarvpnTrapStatus | read-only | current | Return codes for route server VPN level operations. vpnAddOk(1) VPN Creation OK vpnInternalFailure(2) Memory Corruption Failure vpnTooMany(3) Exceeded Max # of… |
| 1.3.6.1.4.1.1751.2.18.15.34 | ScalaripIntfStatus | read-only | current | Return codes for route server IP interface operations. intOK(1) Interface OK. intIntFailure(2) Memory Corruption intTooMany(3) Exceeded Max # Of Interfaces int… |
| 1.3.6.1.4.1.1751.2.18.15.35 | ScalarsubChanStatus | read-only | current | Return codes for route server sub channel connections operations. scOK(1) SubChannel OK scIntFailure(2) Memory Corruption scTooMany(3) Too Many SubChannels scB… |
| 1.3.6.1.4.1.1751.2.18.15.36 | ScalarrouteSrvStatus | read-only | current | Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. rsCardOK(1) Route Server OK rsModInitFail(2) Ro… |
| 1.3.6.1.4.1.1751.2.18.15.37 | ScalarapsFailureReasonCode | read-only | current | Identification of cause for automatic protection switching failure. protectionCard-notPresent(1) protection card doesn't exist protectionCardType-notAPS(2) car… |
| 1.3.6.1.4.1.1751.2.18.15.38 | ScalarstatRtStatus | read-only | current | Return codes for route server static route condititions. statRtOk(1) Static Rt OK statRtIntFailure(2) Memory Corruption statRtMany(3) Too Many Static Routes st… |
| 1.3.6.1.4.1.1751.2.18.15.39 | ScalarportFailureReasonCode | read-only | current | Identification of cause for failure in changing the parameters of a port insufficientModuleBandwidth(1) insufficient module bandwidth localLoopNotAllowedWhenIn… |
| 1.3.6.1.4.1.1751.2.18.15.40 | ScalardlciNumber | read-only | current | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ScalaripAddrNumber | read-only | current | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | ScalarpingStatusReasonCode | read-only | current | The response value - Alive destination can be reached Not Alive destination can't be reached |
| 1.3.6.1.4.1.1751.2.18.15.43 | ScalarprimarySoftwareVersion | read-only | current | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | ScalarbackupSoftwareVersion | read-only | current | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | ScalaroamActDeactResultCode | read-only | current | Various result codes for the operator's command for OAM Activation-Deactivation. eteCCActSuccTowardsFarEnd: eteCCActSuccTowardsNearEnd: eteCCActSuccTowardsBoth… |
| 1.3.6.1.4.1.1751.2.18.15.46 | ScalartasCmprsAnnceReasonCode | read-only | current | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | ScalartasTstLineReasonCode | read-only | current | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | Scalargr303PPSReasonCode | read-only | current | These reason codes are the result of GR303 Path Protection Switching (PPS) command issued by user |
| 1.3.6.1.4.1.1751.2.18.15.49 | Scalargr303PPSSource | read-only | current | Indicates the initiator of the PPS switching |
| 1.3.6.1.4.1.1751.2.18.15.50 | ScalartasMemReasonCode | read-only | current | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | ScalartasTrapTstId | read-only | current | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | ScalartasTrapAnnceId | read-only | current | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | ScalaratmVpi | read-only | current | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | ScalaratmVci | read-only | current | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | ScalariptResultCode | read-only | current | Various result codes for the operator's command forsetting/deleting interface protection group. interfaceProtectioniptAlreadyExistInterface: Expect another int… |
| 1.3.6.1.4.1.1751.2.18.15.56 | ScalarpgtResultCode | read-only | current | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | ScalartasmControlBlockAllocFailReasonCode | read-only | current | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | ScalartasmCacheMemAllocFailReasonCode | read-only | current | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | ScalaratmTrunkingConfigFailureCode | read-only | current | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has already been configured, the… |
| 1.3.6.1.4.1.1751.2.18.15.60 | ScalarsapphireIntfAddressFailReasonCode | read-only | current | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Ill… |
| 1.3.6.1.4.1.1751.2.18.15.61 | ScalarchassisOverTempAlarmReasonCode | read-only | current | Indicator of presence of chassis over temperature alarm. |
| 1.3.6.1.4.1.1751.2.18.16 | NodesysControl | |||
| 1.3.6.1.4.1.1751.2.18.16.1 | ScalarsaveConfiguration | read-write | current | save configuration |
| 1.3.6.1.4.1.1751.2.18.16.2 | ScalarupgradeSoftware | read-write | current | software load management |
| 1.3.6.1.4.1.1751.2.18.16.3 | ScalarpurgePvcConnections | read-write | current | purge PVC connections on indicated interface |
| 1.3.6.1.4.1.1751.2.18.16.4 | ScalarpurgeRoutingTable | read-write | current | purge indicated routing table |
| 1.3.6.1.4.1.1751.2.18.16.5 | ScalarresetPortStatistics | read-write | current | Reset the statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.6 | ScalarresetInterfaceStatistics | read-write | current | Reset the interface counters for the given port Id (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.16.7 | ScalarresetAllStatistics | read-write | current | Reset all port and interface statistics counters, accpets any integer value |
| 1.3.6.1.4.1.1751.2.18.16.8 | ScalarupgradeIpAddress | read-write | current | IP Address for upgrade ftp server. |
| 1.3.6.1.4.1.1751.2.18.16.9 | ScalarupgradeAccountName | read-write | current | ftp account name for access to upgrade ftp server. |
| 1.3.6.1.4.1.1751.2.18.16.10 | ScalarupgradeAccountPassword | read-write | current | ftp account password for access to upgrade ftp server. |
| 1.3.6.1.4.1.1751.2.18.16.11 | ScalarupgradeCdromFile | read-write | current | cdrom file path on upgrade ftp server to upgrade image library. |
| 1.3.6.1.4.1.1751.2.18.16.12 | ScalarupgradeLicenseKey | read-write | current | software license key. |
| 1.3.6.1.4.1.1751.2.18.16.13 | ScalarupgradeSwCopyStatus | read-only | current | Current status of the ftp software upgrade download. Status of the software upgrade. noActivity is the initial start state from boot-up. working is set while f… |
| 1.3.6.1.4.1.1751.2.18.16.14 | ScalarupgradeSwErrorStatus | read-only | current | The result of the finish of the ftp software upgrade download. Set to a value 3-22 if upgradeSwCopyStatus is doneWithError. Set to none if upgradeSwCopyStatus … |
| 1.3.6.1.4.1.1751.2.18.16.15 | ScalarsystemSwCopy | read-write | current | start copy system files according to the profile. When upgradeSwCopyStatus is working, the start request will be ignored. Abort will have effect only when upgr… |
| 1.3.6.1.4.1.1751.2.18.16.16 | TablefwReleaseTable | not-accessible | current | Table of firmware inventory data |
| 1.3.6.1.4.1.1751.2.18.16.16.1 | RowfwReleaseEntry | not-accessible | current | Row definition for firmware inventory |
| 1.3.6.1.4.1.1751.2.18.16.16.1.1 | ColumnfwReleaseSlot | not-accessible | current | Physical slot location. Valid range is a number between 1 and 16. |
| 1.3.6.1.4.1.1751.2.18.16.16.1.2 | ColumnfwReleaseRunning | read-only | current | the firmware release currently running in a physical slot (e.g., 01.03.C01). |
| 1.3.6.1.4.1.1751.2.18.16.16.1.3 | ColumnfwReleaseEpromVersion | read-only | current | the version of the firmware located on the I/O card (e.g., 01.03.C01). |
| 1.3.6.1.4.1.1751.2.18.16.16.1.4 | ColumnfwReleaseCurrentVersion | read-only | current | the version of the firmware located in /scsi/current/io on the CPU disk drive (e.g., 01.03.C01). |
| 1.3.6.1.4.1.1751.2.18.16.16.1.5 | ColumnfwReleaseNextVersion | read-only | current | the version of the firmware located in /scsi/next/io on the CPU disk drive (e.g., 01.03.C01). |
| 1.3.6.1.4.1.1751.2.18.16.16.1.6 | ColumnfwReleaseUpdate | read-write | current | Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. |
| 1.3.6.1.4.1.1751.2.18.16.16.1.7 | ColumnfwReleaseUpgrade | read-write | current | Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. |
| 1.3.6.1.4.1.1751.2.18.16.17 | ScalarresetBridgeDomainStatistics | read-write | current | Resets bridge domain statistics. |
| 1.3.6.1.4.1.1751.2.18.16.18 | ScalarremoteRebootCommand | read-write | current | type of reboot. |
| 1.3.6.1.4.1.1751.2.18.16.19 | ScalarresetFrLmiStatistics | read-write | current | Reset the frame relay LMI statistics counters for the given port Id (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.16.20 | ScalarremoveConfigurationFiles | read-write | current | Removes the user configuration/connection files from the hard disk on the cpu. |
| 1.3.6.1.4.1.1751.2.18.16.21 | ScalarsystemFilesDirtyBitStatus | read-only | current | Bit mask for system files: 0: all are clean 1: console.def 2: ecd.def 4: ssid.def 8: cnctn.db 16: iisp.cbr 32: iisp.vbr 64: spvc.db 128: vipr.cfg 256: fwc.def … |
| 1.3.6.1.4.1.1751.2.18.16.22 | ScalarresetAtmIlmiStatistics | read-write | current | Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.16.23 | ScalarresetImaGrpChannelStatistics | read-write | current | Reset the IMA Group Statistics counters for the given port Id (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.16.24 | Scalaroc3APSResetStats | read-write | current | Reset the oc3aps Group Statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.25 | ScalarresetsonetSectionStatistics | read-write | current | Reset the sonetSectionCurrent Statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.26 | ScalarresetsonetLineStatistics | read-write | current | Reset the sonetLineCurrent Statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.27 | ScalarresetsonetVTPathStatistics | read-write | current | Reset the sonetVTPathCurrent Statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.28 | ScalarviprVpnReset | read-write | current | Reset the VPN statistics for VPN specified by (SSVV) |
| 1.3.6.1.4.1.1751.2.18.16.29 | ScalarsvcRetBackupStatus | read-only | current | Indicates backup status wrt SVC retention |
| 1.3.6.1.4.1.1751.2.18.16.30 | ScalarresetsonetPathStatistics | read-write | current | Reset the sonetPathCurrent Statistics counters for the given port Id (SSPP) |
| 1.3.6.1.4.1.1751.2.18.16.31 | ScalarambientTemperature | read-only | current | Ambient temperature in degree Celcius where the system is kept |
| 1.3.6.1.4.1.1751.2.18.16.32 | NoderemoteDbServerGroup | |||
| 1.3.6.1.4.1.1751.2.18.16.32.1 | ScalarremoteDbServerIpAddress | read-write | current | IP Address for remote database server. |
| 1.3.6.1.4.1.1751.2.18.16.32.2 | ScalarremoteDbServerLogin | read-write | current | ftp account name for remote database server. |
| 1.3.6.1.4.1.1751.2.18.16.32.3 | ScalarremoteDbServerPassword | read-write | current | ftp account password for remote database server. |
| 1.3.6.1.4.1.1751.2.18.16.32.4 | ScalarremoteDbServerDirectory | read-write | current | directory on remote database server where to save/restore database files from. |
| 1.3.6.1.4.1.1751.2.18.16.32.5 | ScalarremoteDbCommand | read-write | current | remote database operation. |
| 1.3.6.1.4.1.1751.2.18.16.32.6 | ScalarremoteDbOperationStatus | read-only | current | Current status of remote database command. |
| 1.3.6.1.4.1.1751.2.18.16.32.7 | ScalarremoteDbOperationErrorStatus | read-only | current | The result at the finish of remote database operation. |
| 1.3.6.1.4.1.1751.2.18.17 | NodestratumConfig | |||
| 1.3.6.1.4.1.1751.2.18.17.1 | ScalarstratumSyncSource | read-write | current | Clock source for the stratum card - lineTiming: must have slot and port specified in stratumPrimaryLineId. compositeClock: local clock must be available. |
| 1.3.6.1.4.1.1751.2.18.17.2 | ScalarstratumPrimaryLineId | read-write | current | Format SSPP (slot and port #'s) to be used when lineTiming is specified in stratumSyncSource. |
| 1.3.6.1.4.1.1751.2.18.17.3 | ScalarstratumSecondaryLineId | read-write | current | Format SSPP (slot and port #'s) to be used if the primary line has failed. Zeros imply that the stratum should switch to holdover mode instead. |
| 1.3.6.1.4.1.1751.2.18.17.4 | ScalarstratumLevel | read-write | current | Enable or disable the switching over to stratum 4 when stratum 3 is not possible. |
| 1.3.6.1.4.1.1751.2.18.17.5 | ScalarstratumLineCommand | read-write | current | Forces the stratum card to use one of the two specified lines as its clock source when the stratumSyncSource is lineTiming. |
| 1.3.6.1.4.1.1751.2.18.17.6 | ScalarstratumLineTimingStatus | read-only | current | Represents the source of the current clock. |
| 1.3.6.1.4.1.1751.2.18.17.7 | ScalarstratumMode | read-only | current | Current status of the primary stratum card. synchronized3(1) stratum is synchronized with accuracy 4.6 x 10e-6 synchronized4(2) stratum is synchronized with ac… |
| 1.3.6.1.4.1.1751.2.18.17.8 | ScalarstratumBackupMode | read-only | current | Current status of the backup stratum card. |
| 1.3.6.1.4.1.1751.2.18.17.9 | ScalarstratumRefFailAction | read-write | current | Defines whether the stratum should switch to freerun or holdover on reference clock failure. |
| 1.3.6.1.4.1.1751.2.18.17.10 | ScalarstratumPortStatus | read-only | current | Current status of the primary stratum card. portFOS indicates port frequency offset. |
| 1.3.6.1.4.1.1751.2.18.17.11 | ScalarstratumBkupPortStatus | read-only | current | Current status of the backup stratum card. portFOS indicates port frequency offset. |
| 1.3.6.1.4.1.1751.2.18.17.12 | ScalaractiveStratum | read-only | current | Current status of the backup stratum card. |
| 1.3.6.1.4.1.1751.2.18.18 | NodecellTest | |||
| 1.3.6.1.4.1.1751.2.18.18.1 | ScalarcellTestIfB | read-write | current | Interface index used for testing cell transfer. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port num… |
| 1.3.6.1.4.1.1751.2.18.18.2 | ScalarcellTestVpiB | read-write | current | VPI value for testing cell transfer to an I/O card. Valid range is a number between 0 and 4095. If the I/O card interface is not ATM, then this will always be … |
| 1.3.6.1.4.1.1751.2.18.18.3 | ScalarcellTestVcidB | read-write | current | Virtual Check Id for testing cell transfer to an I/O card. Valid range is a number between 0 and 65535. If the I/O card interface is frame relay, this field ac… |
| 1.3.6.1.4.1.1751.2.18.18.4 | ScalarcellTestServiceType | read-write | current | Service types for testing cell transfer |
| 1.3.6.1.4.1.1751.2.18.18.5 | ScalarcellTestConnType | read-write | current | Connection types for testing cell transfer |
| 1.3.6.1.4.1.1751.2.18.18.6 | ScalarcellTestProtocol | read-only | current | Protocol (interface type) on the I/O |
| 1.3.6.1.4.1.1751.2.18.18.7 | ScalarcellTestPayLoadTx | read-write | current | PayLoad to be transmitted on I/O interface |
| 1.3.6.1.4.1.1751.2.18.18.8 | ScalarcellTestPayLoadRx | read-only | current | Last PayLoad received on I/O interface |
| 1.3.6.1.4.1.1751.2.18.18.9 | ScalarcellTestAction | read-write | current | PayLoad received on I/O interface |
| 1.3.6.1.4.1.1751.2.18.18.10 | ScalarcellTestRxPduCount | read-only | current | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.18.11 | ScalarcellTestTxPduCount | read-only | current | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.18.12 | ScalarcellTestMismatchPduCount | read-only | current | Number of times Rx payload mismatched with Tx payload. |
| 1.3.6.1.4.1.1751.2.18.18.13 | ScalarcellTestStatus | read-only | current | Indicates whether a cellTest test is in progress or not. |
| 1.3.6.1.4.1.1751.2.18.18.14 | ScalarcellTestVUNIB | read-write | current | VUNI id for testing cell transfer to an I/O card. This field is valid only for ATM interface. |
| 1.3.6.1.4.1.1751.2.18.19 | NodesysInfo | |||
| 1.3.6.1.4.1.1751.2.18.19.1 | ScalarsysInfoTxOneCellTotal | read-only | current | Total amount of cells within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.2 | ScalarsysInfoTxOneCellUsed | read-only | current | Amount of cells currently being used within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.3 | ScalarsysInfoTxOneCellHigh | read-only | current | High-water mark of cells used within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.4 | ScalarsysInfoRxOneCellTotal | read-only | current | Total amount of cells within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.5 | ScalarsysInfoRxOneCellUsed | read-only | current | Amount of cells currently being used within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.6 | ScalarsysInfoRxOneCellHigh | read-only | current | High-water mark of cells used within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.7 | ScalarsysInfoRxMultiCellTotal | read-only | current | Total amount of multi-cells within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.8 | ScalarsysInfoRxMultiCellUsed | read-only | current | Amount of multi-cells currently being used within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.9 | ScalarsysInfoRxMultiCellHigh | read-only | current | High-water mark of multi-cells used within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.10 | ScalarsysInfoMsgPoolTotal | read-only | current | Total amount of messages within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.11 | ScalarsysInfoMsgPoolUsed | read-only | current | Amount of messages currently being used within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.12 | ScalarsysInfoMsgPoolHigh | read-only | current | High-water mark of messages used within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.13 | ScalarsysInfoDiscFreeKBytes | read-only | current | Amount of disc free space available in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.14 | ScalarsysInfoCpuUtilization1 | read-only | current | xx.yy% - cpuUtilization1 is the xx part of it. |
| 1.3.6.1.4.1.1751.2.18.19.15 | ScalarsysInfoCpuUtilization2 | read-only | current | xx.yy% - cpuUtilization2 is the yy part of it. |
| 1.3.6.1.4.1.1751.2.18.19.16 | ScalarsysInfoSysUptime | read-only | current | Amount of time cpu has been up in seconds. |
| 1.3.6.1.4.1.1751.2.18.19.17 | ScalarsysInfoBadCellRx | read-only | current | The number of bad cells (BIP16) received so far. |
| 1.3.6.1.4.1.1751.2.18.19.18 | ScalarsysInfoMisaligned | read-only | current | The number of misaligned cells received so far. |
| 1.3.6.1.4.1.1751.2.18.19.19 | ScalarsysInfoClockAErr | read-only | current | Value is 1, TRUE, if the clock on backplane A is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.20 | ScalarsysInfoClockBErr | read-only | current | Value is 1, TRUE, if the clock on backplane B is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.21 | ScalarsysInfoBIPAErr | read-only | current | Value is 1, TRUE, if the cell circuit on backplane A is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.22 | ScalarsysInfoBIPBErr | read-only | current | Value is 1, TRUE, if the cell circuit on backplane B is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.23 | ScalarsysInfoDiscTotalKBytes | read-only | current | Amount of disc space available in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.24 | ScalarsysInfoRAMFreeKBytes | read-only | current | Amount of RAM memory available for use in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.25 | ScalarsysInfoRAMTotalKBytes | read-only | current | Amount of RAM memory available on cpu card in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.26 | TablemsgPoolViewTable | not-accessible | current | Table of Msg Pools In the System, Used only for diagnostic purposes |
| 1.3.6.1.4.1.1751.2.18.19.26.1 | RowmsgPoolViewEntry | not-accessible | current | Row definition of Msg Pool Table |
| 1.3.6.1.4.1.1751.2.18.19.26.1.1 | ColumnmsgPoolViewIndex | not-accessible | current | It is the index of the MsgPool array for which the information is requested. Information about Msgs Which are not there in the free pool is returned.A msg is s… |
| 1.3.6.1.4.1.1751.2.18.19.26.1.2 | ColumnmsgPoolViewTskId | read-only | current | Task Id of the Sender of the Particular Msg, This will give the integer value, has to be converted to hex for comparison |
| 1.3.6.1.4.1.1751.2.18.19.26.1.3 | ColumnmsgPoolViewTskName | read-only | current | Task Name of the Sender of the Particular Msg |
| 1.3.6.1.4.1.1751.2.18.19.26.1.4 | ColumnmsgPoolViewMsgCmd | read-only | current | msgCmd being sent by the sending Task |
| 1.3.6.1.4.1.1751.2.18.19.27 | ScalarprimaryCpuHwType | read-only | current | Indicates the hardware version type of the primary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting … |
| 1.3.6.1.4.1.1751.2.18.19.28 | ScalarsecondaryCpuHwType | read-only | current | Indicates the hardware version type of the secondary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supportin… |
| 1.3.6.1.4.1.1751.2.18.19.29 | ScalarsysInfoDiskCheck | read-only | current | Indicates the checking status of the disk in CPU card. |
| 1.3.6.1.4.1.1751.2.18.19.30 | ScalarswitchAlarmStatus | read-only | current | Current status of the alarm on the switch. notAvailable - The alarm status could not be retreived. none - No alarm is present. minor, major, critical - An alar… |
| 1.3.6.1.4.1.1751.2.18.20 | NodeethernetConfig | |||
| 1.3.6.1.4.1.1751.2.18.20.1 | Tablearp1Table | not-accessible | current | Table of ARP cache data. |
| 1.3.6.1.4.1.1751.2.18.20.1.1 | Rowarp1Entry | not-accessible | current | Row definition for ARP cache. |
| 1.3.6.1.4.1.1751.2.18.20.1.1.1 | Columnarp1CardSlot | not-accessible | current | Slot ethernet card is in. |
| 1.3.6.1.4.1.1751.2.18.20.1.1.2 | Columnarp1BridgeGroupNum | not-accessible | current | Bridge Group the entry belongs to. |
| 1.3.6.1.4.1.1751.2.18.20.1.1.3 | Columnarp1IpAddress | not-accessible | current | Entry IP address. |
| 1.3.6.1.4.1.1751.2.18.20.1.1.4 | Columnarp1PhysicalAddr | read-only | current | Entry physical address. |
| 1.3.6.1.4.1.1751.2.18.20.1.1.5 | Columnarp1EntryAge | read-only | current | Age of cache entry. |
| 1.3.6.1.4.1.1751.2.18.20.2 | Tablearp2Table | not-accessible | current | Table of ARP cache data. |
| 1.3.6.1.4.1.1751.2.18.20.2.1 | Rowarp2Entry | not-accessible | current | Row definition for ARP cache. |
| 1.3.6.1.4.1.1751.2.18.20.2.1.1 | Columnarp2CardSlot | not-accessible | current | Slot ethernet card is in. |
| 1.3.6.1.4.1.1751.2.18.20.2.1.2 | Columnarp2BridgeGroupNum | not-accessible | current | Bridge Group the entry belongs to. |
| 1.3.6.1.4.1.1751.2.18.20.2.1.3 | Columnarp2PhysicalAddr | not-accessible | current | Entry physical address. |
| 1.3.6.1.4.1.1751.2.18.20.2.1.4 | Columnarp2IpAddress | read-only | current | Entry IP address. |
| 1.3.6.1.4.1.1751.2.18.20.2.1.5 | Columnarp2EntryAge | read-only | current | Age of cache entry. |
| 1.3.6.1.4.1.1751.2.18.20.3 | TablebridgeCacheTable | not-accessible | current | Table of bridge cache data. |
| 1.3.6.1.4.1.1751.2.18.20.3.1 | RowbridgeCacheEntry | not-accessible | current | Row definition for bridge cache. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.1 | ColumnbridgeCacheCardSlot | not-accessible | current | Slot ethernet card is in. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.2 | ColumnbridgeCacheBridgeGroupNum | not-accessible | current | Bridge Group the entry belongs to. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.3 | ColumnbridgeCachePhysicalAddr | not-accessible | current | Entry physical address. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.4 | ColumnbridgeCacheType | read-only | current | Type of Entry. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.5 | ColumnbridgeCacheSourcePort | read-only | current | Port entry was obtained from. |
| 1.3.6.1.4.1.1751.2.18.20.3.1.6 | ColumnbridgeCacheEntryAge | read-only | current | Age of cache entry. |
| 1.3.6.1.4.1.1751.2.18.21 | NodealarmConfig | |||
| 1.3.6.1.4.1.1751.2.18.21.1 | ScalaralarmStatusInputBitmap | read-only | current | Remote status from external device. bit = 0 closed, bit = 1 open, LSB 15 bits represent 15 external inputs. MSB bit 15 is always 0. |
| 1.3.6.1.4.1.1751.2.18.21.2 | ScalaralarmStatusOutputBitmap | read-write | current | Control output for alarm card. bit = 0 deactivated, bit = 1 activated, LSB 4 bits represent 4 external outputs. Bit 0 through bit 3 is output 1 through 4 Contr… |
| 1.3.6.1.4.1.1751.2.18.21.3 | ScalaralarmSeverityLevelBitmap | read-write | current | Alarm severity level. bit = 0 noAlarm, bit = 1 Alarm present, LSB 3 bits represent severity levels. bit 0 = Minor Alarm, bit 1 = Major Alarm, bit 2 = Critical … |
| 1.3.6.1.4.1.1751.2.18.21.4 | ScalaralarmAcoStatusBitmap | read-only | current | Audio alarm status. bit = 0 No alarm cutoff, bit = 1 Alarm cutoff, LSB 3 bits represent audio alarms. bit 0 = Local alarm cutoff, bit 1 = remote alarm cutoff, … |
| 1.3.6.1.4.1.1751.2.18.22 | NodesysTest | |||
| 1.3.6.1.4.1.1751.2.18.22.1 | NodeoamTest | |||
| 1.3.6.1.4.1.1751.2.18.22.1.1 | ScalaroamTestIfB | read-write | current | Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port nu… |
| 1.3.6.1.4.1.1751.2.18.22.1.2 | ScalaroamTestVpiB | read-write | current | VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.22.1.3 | ScalaroamTestVciB | read-write | current | VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.22.1.4 | ScalaroamTestStatus | read-only | current | Inidcates the current status of oam test. |
| 1.3.6.1.4.1.1751.2.18.22.1.5 | ScalaroamTestAction | read-write | current | Test action to be performed. |
| 1.3.6.1.4.1.1751.2.18.22.1.6 | ScalaroamTestTxCount | read-only | current | Valid cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.22.1.7 | ScalaroamTestRxCount | read-only | current | Valid cells received. |
| 1.3.6.1.4.1.1751.2.18.22.1.8 | ScalaroamTestMismatchCount | read-only | current | Number of times Rx correlation tag is mismatched with the Tx correlation tag. |
| 1.3.6.1.4.1.1751.2.18.22.1.9 | ScalaroamTestLocationID | read-write | current | Location ID of the ATM Node where the loopback is to occur. |
| 1.3.6.1.4.1.1751.2.18.22.1.10 | ScalaroamTestLoopbackType | read-write | current | OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, u… |
| 1.3.6.1.4.1.1751.2.18.22.2 | TableoamActDeactTable | not-accessible | current | Table of oam activate and deactivate functions |
| 1.3.6.1.4.1.1751.2.18.22.2.1 | RowoamActDeactEntry | not-accessible | current | Row definition of oam activate and deactivate |
| 1.3.6.1.4.1.1751.2.18.22.2.1.1 | ColumnoamActDeactIfB | not-accessible | current | Interface index for an OAM CC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, a… |
| 1.3.6.1.4.1.1751.2.18.22.2.1.2 | ColumnoamActDeactVpiB | not-accessible | current | VPI value for an oam CC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.3 | ColumnoamActDeactVciB | not-accessible | current | VCI value for oam CC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.4 | ColumnoamActDeactFuncType | read-write | current | OAM Function type represents the OAM flow for activation or deactivattion for this connection. the possible function types activated in one connection are : fp… |
| 1.3.6.1.4.1.1751.2.18.22.2.1.5 | ColumnoamActDeactDirFlow | read-write | current | The direction in which cells will be transmitted. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.6 | ColumnoamActDeactFlowType | read-write | current | Flow Type. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.7 | ColumnoamActDeactBlkSizeAB | read-write | current | Block Size A-B represents the size of the block of user cells taken into consideration for performance monitoring in A-B direction. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.8 | ColumnoamActDeactBlkSizeBA | read-write | current | Block Size A-B is the size of the block of user cells taken into consideration for performance monitoring in B-A direction. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.9 | ColumnoamActDeactStsSrcPointEteCC | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.10 | ColumnoamActDeactStsSnkPointEteCC | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.11 | ColumnoamActDeactRsltPrevReq | read-only | current | Cause of Failure shows the reasons of failure of the last activation request on this connection form the local user. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.12 | ColumnoamActDeactRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.22.2.1.13 | ColumnoamActDeactStsSrcPointEtePM | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.14 | ColumnoamActDeactStsSnkPointEtePM | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.15 | ColumnoamActDeactStsSrcPointEtePMBR | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.16 | ColumnoamActDeactStsSnkPointEtePMBR | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.17 | ColumnoamActDeactBRBlockError | read-only | current | Backware reporting Block error for PM connection. Valid range is a number between 0 and 32768. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.18 | ColumnoamActDeactBRLostInsertedCell | read-only | current | Backware reporting lost inserted cell for PM connection. Valid range is a number between 0 and 32768. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.19 | ColumnoamActDeactBRMisInsertedCell | read-only | current | Backware reporting misinserted cell for PM connection. Valid range is a number between 0 and 32768. |
| 1.3.6.1.4.1.1751.2.18.22.2.1.20 | ColumnoamActDeactStsSrcPointSegPM | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.21 | ColumnoamActDeactStsSnkPointSegPM | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.22 | ColumnoamActDeactStsSrcPointSegPMBR | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.23 | ColumnoamActDeactStsSnkPointSegPMBR | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.24 | ColumnoamActDeactStsSrcPointSegCC | read-only | current | Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point |
| 1.3.6.1.4.1.1751.2.18.22.2.1.25 | ColumnoamActDeactStsSnkPointSegCC | read-only | current | Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point |
| 1.3.6.1.4.1.1751.2.18.22.3 | TableoamLoopbackTable | not-accessible | current | Table of oam loopback functions |
| 1.3.6.1.4.1.1751.2.18.22.3.1 | RowoamLoopbackEntry | not-accessible | current | Row definition of oam loop back |
| 1.3.6.1.4.1.1751.2.18.22.3.1.1 | ColumnoamLpbkIfB | not-accessible | current | Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port nu… |
| 1.3.6.1.4.1.1751.2.18.22.3.1.2 | ColumnoamLpbkVpiB | not-accessible | current | VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.3 | ColumnoamLpbkVciB | not-accessible | current | VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.4 | ColumnoamLoopbackType | read-write | current | OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, u… |
| 1.3.6.1.4.1.1751.2.18.22.3.1.5 | ColumnoamLpbkLocationID | read-write | current | Location ID of the ATM Node where the loopback is to occur. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.6 | ColumnoamLpbkAction | read-write | current | Test action to be performed. endLoopbackContinuously is not used. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.7 | ColumnoamLpbkStatus | read-only | current | Inidcates the current status of oam test. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.8 | ColumnoamLpbkTxCount | read-only | current | Valid cells transmitted. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.9 | ColumnoamLpbkRxCount | read-only | current | Valid cells received. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.10 | ColumnoamLpbkMismatchCount | read-only | current | Number of times Rx correlation tag is mismatched with the Tx correlation tag. |
| 1.3.6.1.4.1.1751.2.18.22.3.1.11 | ColumnoamLpbkTimeout | read-only | current | number of time out |
| 1.3.6.1.4.1.1751.2.18.23 | NodefwDriverSup | |||
| 1.3.6.1.4.1.1751.2.18.23.1 | TablecardFwVerTable | not-accessible | current | Table of card firware version status |
| 1.3.6.1.4.1.1751.2.18.23.1.1 | RowcardFwVerEntry | not-accessible | current | Row definition for card firmware version status |
| 1.3.6.1.4.1.1751.2.18.23.1.1.1 | ColumncardFwVerSlot | not-accessible | current | card slot number |
| 1.3.6.1.4.1.1751.2.18.23.1.1.2 | ColumncardFwVerType | read-write | current | Card type |
| 1.3.6.1.4.1.1751.2.18.23.1.1.3 | ColumncardFwVerCurrent | read-only | current | Card firmware version currently loaded on firmware |
| 1.3.6.1.4.1.1751.2.18.23.1.1.4 | ColumncardFwVerCurrentIsDefault | read-only | current | curent driver is default |
| 1.3.6.1.4.1.1751.2.18.23.1.1.5 | ColumncardFwVerNext | read-write | current | Card firmware version that user wants to upgrade to. The values are limited those supported by the release. |
| 1.3.6.1.4.1.1751.2.18.23.1.1.6 | ColumncardFwVerNextIsDefault | read-write | current | next driver is default |
| 1.3.6.1.4.1.1751.2.18.23.1.1.7 | ColumncardFwDnldStatus | read-only | current | firmware download procedure status |
| 1.3.6.1.4.1.1751.2.18.23.1.1.8 | ColumncardFwRetries | read-only | current | Number of times firmware download procedure failed consequently. |
| 1.3.6.1.4.1.1751.2.18.23.2 | TablefwDriverTable | not-accessible | current | Table of available firmware drivers |
| 1.3.6.1.4.1.1751.2.18.23.2.1 | RowfwDriverEntry | not-accessible | current | Row definition for available firmware drivers |
| 1.3.6.1.4.1.1751.2.18.23.2.1.1 | ColumnfwSlotId | not-accessible | current | driver slot id |
| 1.3.6.1.4.1.1751.2.18.23.2.1.2 | ColumnfwDriverType | not-accessible | current | firmware driver type - definition consistent with cardType. |
| 1.3.6.1.4.1.1751.2.18.23.2.1.3 | ColumnfwIsDefault | not-accessible | current | firmware driver wether default or not |
| 1.3.6.1.4.1.1751.2.18.23.2.1.4 | ColumnfwDriverName | not-accessible | current | firmware driver file name |
| 1.3.6.1.4.1.1751.2.18.23.2.1.5 | ColumnfwDriverFrn | read-only | current | Firmware Release Number of firmware driver |
| 1.3.6.1.4.1.1751.2.18.23.2.1.6 | ColumnfwDriverSize | read-only | current | file size of firmware driver |
| 1.3.6.1.4.1.1751.2.18.23.2.1.7 | ColumnfwDriverChecksum | read-only | current | checksum of firmware driver file |
| 1.3.6.1.4.1.1751.2.18.24 | NodeviprConfig | |||
| 1.3.6.1.4.1.1751.2.18.24.1 | TableviprRouterConfigTable | not-accessible | current | Table of Vipr Router Instance Information |
| 1.3.6.1.4.1.1751.2.18.24.1.1 | RowviprRouterConfigEntry | not-accessible | current | definition for VIPR Route instance attributes |
| 1.3.6.1.4.1.1751.2.18.24.1.1.1 | ColumnviprSlot | not-accessible | current | The slot number of the Virtual Router card (SS) |
| 1.3.6.1.4.1.1751.2.18.24.1.1.2 | ColumnviprRouterId | not-accessible | current | A unique Id for the Router Instance in a router card |
| 1.3.6.1.4.1.1751.2.18.24.1.1.3 | ColumnviprRouterName | read-write | current | The ASCII name of the Router Instance |
| 1.3.6.1.4.1.1751.2.18.24.1.1.4 | ColumnviprRouterNoOfInterfaces | read-only | current | This variable describes the no of interfaces defined in the Router Instance |
| 1.3.6.1.4.1.1751.2.18.24.1.1.5 | ColumnviprRouterNoOfRoutes | read-only | current | This variable describes the no of static routes defined in the Router Instance |
| 1.3.6.1.4.1.1751.2.18.24.1.1.6 | ColumnviprRouterAdminStatus | read-write | current | This variable represents the various X.731 states the Router state machine can take Administartively |
| 1.3.6.1.4.1.1751.2.18.24.1.1.7 | ColumnviprRouterOperStatus | read-only | current | This variable represents the various X.731 states the Router state machine can take operationally |
| 1.3.6.1.4.1.1751.2.18.24.1.1.8 | ColumnviprRouterInitTmr | read-write | current | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.1.1.9 | ColumnviprRouterDisabWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. |
| 1.3.6.1.4.1.1751.2.18.24.1.1.10 | ColumnviprRouterShutDwnWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.1.1.11 | ColumnviprRouterDisableWarning | read-write | current | This variable when disabled will mask all the warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.1.1.12 | ColumnviprRouterDisableReason | read-only | current | This variable describes the reason why the Router in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.1.1.13 | ColumnviprRouterRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.24.2 | TableviprIntfConfigTable | not-accessible | current | Table of Vipr Interface Config Information |
| 1.3.6.1.4.1.1751.2.18.24.2.1 | RowviprIntfConfigEntry | not-accessible | current | definition for VIPR interface attributes |
| 1.3.6.1.4.1.1751.2.18.24.2.1.1 | ColumnviprIntfId | not-accessible | current | A unique Id for the Interface in a router instance |
| 1.3.6.1.4.1.1751.2.18.24.2.1.2 | ColumnviprIntfIPAddress | read-write | current | The IP address of the entrprise network to which the interface is attached to |
| 1.3.6.1.4.1.1751.2.18.24.2.1.3 | ColumnviprIntfIPNetMask | read-write | current | The IP Subnet Mask of the entrprise network to which the interface is attached to |
| 1.3.6.1.4.1.1751.2.18.24.2.1.4 | ColumnviprIntfAdminStatus | read-write | current | This variable represents the various X.731 states the Interfce statemachine can take Administratively |
| 1.3.6.1.4.1.1751.2.18.24.2.1.5 | ColumnviprIntfOperStatus | read-only | current | This variable represents the various X.731 states the Interfce statemachine can take operationally |
| 1.3.6.1.4.1.1751.2.18.24.2.1.6 | ColumnviprIntfInitTmr | read-write | current | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.7 | ColumnviprIntfDisabWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.8 | ColumnviprIntfShutDwnWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.9 | ColumnviprIntfDisableWarning | read-write | current | This variable when disabled will mask all the Disable warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.10 | ColumnviprIntfDisableReason | read-only | current | This variable describes the reason why the Interface in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.11 | ColumnviprIntfRipVersion | read-write | current | This specifies the version of RIP that interface supports. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.12 | ColumnviprIntfRipMode | read-write | current | This specifies the mode in which RIP protocol runs. |
| 1.3.6.1.4.1.1751.2.18.24.2.1.13 | ColumnviprIntfRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.24.2.1.14 | ColumnviprIntfRipLineType | read-write | current | This specifies the line type when the RIP version is 2. When the RIP version is 1, the RIP line type will be set to broadcast(1). |
| 1.3.6.1.4.1.1751.2.18.24.2.1.15 | ColumnviprIntfAuthPasswd | read-write | current | The authentication password for RIP version 2 |
| 1.3.6.1.4.1.1751.2.18.24.3 | TableviprSubChnlConfigTable | not-accessible | current | Table of Vipr Sub Channel Config Information |
| 1.3.6.1.4.1.1751.2.18.24.3.1 | RowviprSubChnlConfigEntry | not-accessible | current | definition for VIPR sub channel attributes |
| 1.3.6.1.4.1.1751.2.18.24.3.1.1 | ColumnviprSubChnlId | not-accessible | current | A unique Id for the sub channel in the interface |
| 1.3.6.1.4.1.1751.2.18.24.3.1.2 | ColumnviprSubChnlIntfIndex | read-write | current | The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the TosValue, TosMask pair |
| 1.3.6.1.4.1.1751.2.18.24.3.1.3 | ColumnviprSubChnlTrafficType | read-write | current | The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex |
| 1.3.6.1.4.1.1751.2.18.24.3.1.4 | ColumnviprSubChnlLlcEncapType | read-write | current | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.5 | ColumnviprSubChnlMacEncapType | read-write | current | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.6 | ColumnviprSubChnlTosFeature | read-only | current | Allow the user to set the TOS values or not |
| 1.3.6.1.4.1.1751.2.18.24.3.1.7 | ColumnviprSubChnlTosValue | read-only | current | The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in th… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.8 | ColumnviprSubChnlTosMask | read-only | current | The Type of Service mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.9 | ColumnviprSubChnlVpiDlci | read-write | current | The VPI/DLCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.10 | ColumnviprSubChnlVci | read-write | current | The VCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.11 | ColumnviprSubChnlSarType | read-only | current | The SAR Type supported for the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.12 | ColumnviprSubChnlServiceType | read-write | current | The Service types that are supported |
| 1.3.6.1.4.1.1751.2.18.24.3.1.13 | ColumnviprSubChnlFwdErrCorrection | read-write | current | The Forward error correction to be used |
| 1.3.6.1.4.1.1751.2.18.24.3.1.14 | ColumnviprSubChnlInterworkingType | read-write | current | The Encapsulation type used for Frame relay subchannels |
| 1.3.6.1.4.1.1751.2.18.24.3.1.15 | ColumnviprSubChnlFrameSize | read-write | current | The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.24.3.1.16 | ColumnviprSubChnlComBurstSize | read-write | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.17 | ColumnviprSubChnlExcessBurstSize | read-write | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). |
| 1.3.6.1.4.1.1751.2.18.24.3.1.18 | ColumnviprSubChnlCommitedInfoRate | read-write | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into t… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.19 | ColumnviprSubChnlTimeInterval | read-only | current | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.20 | ColumnviprSubChnlAtmPeakCellRate | read-write | current | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.21 | ColumnviprSubChnlAtmSustainedCellRate | read-write | current | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.22 | ColumnviprSubChnlAtmMaxBurstSize | read-write | current | Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.23 | ColumnviprSubChnlFrPeakCellRate | read-only | current | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.24 | ColumnviprSubChnlFrSustainedCellRate | read-only | current | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.25 | ColumnviprSubChnlFrMaxBurstSize | read-only | current | Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.26 | ColumnviprSubChnlFlowType | read-write | current | The type of flow |
| 1.3.6.1.4.1.1751.2.18.24.3.1.27 | ColumnviprSubChnlAdminStatus | read-write | current | This variable represents the various X.731 states the Sub Channel state machine can take Administartively |
| 1.3.6.1.4.1.1751.2.18.24.3.1.28 | ColumnviprSubChnlOperStatus | read-only | current | This variable represents the various X.731 states the Sub Channel state machine can take Operationally |
| 1.3.6.1.4.1.1751.2.18.24.3.1.29 | ColumnviprSubChnlInitTmr | read-write | current | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.30 | ColumnviprSubChnlDisabWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.31 | ColumnviprSubChnlShutDwnWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.32 | ColumnviprSubChnlDisableWarning | read-write | current | This variable when disabled will mask all the Disable warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.33 | ColumnviprSubChnlDisableReason | read-only | current | This variable describes the reason why the SubChnl in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.34 | ColumnviprSubChnlRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.24.3.1.35 | ColumnviprSubChnlImIpAddr | read-write | current | inband management IpAddr |
| 1.3.6.1.4.1.1751.2.18.24.3.1.36 | ColumnviprSubChnlImMask | read-write | current | inband management Mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.37 | ColumnviprSubChnlViB | read-write | current | The viB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.38 | ColumnviprSubChnlVUNIB | read-write | current | The VUNIB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.39 | ColumnviprSubChnlTrafficShaping | read-write | current | Traffic Shaping Support in the A2B direction for outgoing ATM connections. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.40 | ColumnviprSubChnlAtmOamStatus | read-write | current | Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond t… |
| 1.3.6.1.4.1.1751.2.18.24.4 | TableviprRouteConfigTable | not-accessible | current | Table of Vipr static route Config Information |
| 1.3.6.1.4.1.1751.2.18.24.4.1 | RowviprRouteConfigEntry | not-accessible | current | Definition for Vipr static route attributes |
| 1.3.6.1.4.1.1751.2.18.24.4.1.1 | ColumnviprRouteId | not-accessible | current | The unique Id to the routing table entry |
| 1.3.6.1.4.1.1751.2.18.24.4.1.2 | ColumnviprRouteIPAddress | read-write | current | The IP address of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.4.1.3 | ColumnviprRouteIPNetMask | read-write | current | The IP Subnet Mask for the route entry to identify whether the route entry is a host or network |
| 1.3.6.1.4.1.1751.2.18.24.4.1.4 | ColumnviprRouteDestAddress | read-write | current | The IP address of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.4.1.5 | ColumnviprRouteGatewayAddress | read-write | current | The IP address of the Gateway |
| 1.3.6.1.4.1.1751.2.18.24.4.1.6 | ColumnviprRouteServiceType | read-write | current | The Service types that are supported |
| 1.3.6.1.4.1.1751.2.18.24.4.1.7 | ColumnviprRouteMetric | read-write | current | A scalar value for user-supplied static route metric values. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.8 | ColumnviprRouteAdminStatus | read-write | current | This variable represents the various X.731 states the Route state machine can take Administratively |
| 1.3.6.1.4.1.1751.2.18.24.4.1.9 | ColumnviprRouteOperStatus | read-only | current | This variable represents the various X.731 states the Route state machine can take Operationally |
| 1.3.6.1.4.1.1751.2.18.24.4.1.10 | ColumnviprRouteInitTmr | read-write | current | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.11 | ColumnviprRouteDisabWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.12 | ColumnviprRouteShutDwnWarnTmr | read-write | current | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.13 | ColumnviprRouteDisableWarning | read-write | current | This variable when disabled will mask all the Disable warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.14 | ColumnviprRouteDisableReason | read-only | current | This variable describes the reason why the Route in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.4.1.15 | ColumnviprRouteRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.24.4.1.16 | ColumnviprRouteDestMask | read-write | current | The IP Mask of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.5 | TableviprRoutingConfigTable | not-accessible | current | Table of Vipr routes Config Information |
| 1.3.6.1.4.1.1751.2.18.24.5.1 | RowviprRoutingConfigEntry | not-accessible | current | Definition for Vipr route attributes |
| 1.3.6.1.4.1.1751.2.18.24.5.1.1 | ColumnviprRoutingCommand | not-accessible | current | The Routing table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort … |
| 1.3.6.1.4.1.1751.2.18.24.5.1.2 | ColumnviprRoutingIPAddress | read-only | current | The IP address of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.5.1.3 | ColumnviprRoutingIPNetMask | read-only | current | The IP Subnet Mask for the route entry to identify whether the route entry is a host or network |
| 1.3.6.1.4.1.1751.2.18.24.5.1.4 | ColumnviprRoutingDestAddress | read-only | current | The IP address of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.5.1.5 | ColumnviprRoutingGatewayAddress | read-only | current | The IP address of the Gateway |
| 1.3.6.1.4.1.1751.2.18.24.5.1.6 | ColumnviprRoutingServiceType | read-only | current | The Service types that are supported |
| 1.3.6.1.4.1.1751.2.18.24.5.1.7 | ColumnviprRoutingType | read-only | current | Route types supported by the RS Card. |
| 1.3.6.1.4.1.1751.2.18.24.5.1.8 | ColumnviprRoutingMetric | read-only | current | The Path cost |
| 1.3.6.1.4.1.1751.2.18.24.5.1.9 | ColumnviprRoutingDestMask | read-only | current | The IP address Mask of the host/network in the route entry |
| 1.3.6.1.4.1.1751.2.18.24.5.1.10 | ColumnviprRoutingAge | read-only | current | Age of the routing entry |
| 1.3.6.1.4.1.1751.2.18.24.5.1.11 | ColumnviprRoutingIndex | not-accessible | current | Index to the routing entry |
| 1.3.6.1.4.1.1751.2.18.24.6 | TableviprArpConfigTable | not-accessible | current | Table of Vipr Arp Table Information |
| 1.3.6.1.4.1.1751.2.18.24.6.1 | RowviprArpConfigEntry | not-accessible | current | Definition for Vipr Arp Table attributes |
| 1.3.6.1.4.1.1751.2.18.24.6.1.1 | ColumnviprArpCommand | not-accessible | current | The ARP table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to r… |
| 1.3.6.1.4.1.1751.2.18.24.6.1.2 | ColumnviprArpIPAddress | read-only | current | The IP address of the host/network |
| 1.3.6.1.4.1.1751.2.18.24.6.1.3 | ColumnviprArpHwAddress | read-only | current | The hardware address of the host/network |
| 1.3.6.1.4.1.1751.2.18.24.6.1.4 | ColumnviprArpEntryAge | read-only | current | Age of cache entry. |
| 1.3.6.1.4.1.1751.2.18.24.6.1.5 | ColumnviprArpInterfaceIPAddress | read-only | current | The Interface IP address through which it is learned |
| 1.3.6.1.4.1.1751.2.18.24.6.1.6 | ColumnviprArpInterfaceIPMask | read-only | current | The Interface IP address Mask |
| 1.3.6.1.4.1.1751.2.18.24.6.1.7 | ColumnviprArpInterfaceServiceType | read-only | current | The Service type of the interface through which the ARP table is learned |
| 1.3.6.1.4.1.1751.2.18.24.6.1.8 | ColumnviprArpIndex | not-accessible | current | The Index to the Arp table |
| 1.3.6.1.4.1.1751.2.18.24.7 | TableviprPingConfigTable | not-accessible | current | Table of Vipr Ping Table Information |
| 1.3.6.1.4.1.1751.2.18.24.7.1 | RowviprPingConfigEntry | not-accessible | current | Definition for Vipr Ping Table attributes |
| 1.3.6.1.4.1.1751.2.18.24.7.1.1 | ColumnipAddr | not-accessible | current | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.24.7.1.2 | ColumnpingStatus | read-only | current | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.24.8 | TableviprRipConfigTable | not-accessible | current | Table of Vipr Rip Update Interval for each card |
| 1.3.6.1.4.1.1751.2.18.24.8.1 | RowviprRipConfigEntry | not-accessible | current | Definition of Rip Update attributes |
| 1.3.6.1.4.1.1751.2.18.24.8.1.1 | ColumnviprRipUpdateInt | read-write | current | This variable represents the Rip Update Interval used by the RIP protocol to transmit packets. The unit is in seconds. The default is 30 seconds and user can c… |
| 1.3.6.1.4.1.1751.2.18.25 | NodetoneAnnceControl | |||
| 1.3.6.1.4.1.1751.2.18.25.31 | ScalartasCmprsAnnceId | read-write | current | Announcement ID for this announcement file to be compressed. |
| 1.3.6.1.4.1.1751.2.18.25.32 | ScalartasCmprsAnnceReplaceId | read-write | current | Announcement ID of the announcement file to be replaced from the announcement table by this file. |
| 1.3.6.1.4.1.1751.2.18.25.33 | ScalartasCmprsAnnceFilename | read-write | current | File name for this announcement which is to be compressed. |
| 1.3.6.1.4.1.1751.2.18.25.34 | ScalartasCmprsAnnceDescription | read-write | current | Description for this announcement which is to to be compressed. |
| 1.3.6.1.4.1.1751.2.18.25.35 | ScalartasCmprsAnnceCmprsType | read-write | current | The type of compression used for storing this announcement. |
| 1.3.6.1.4.1.1751.2.18.25.36 | ScalartasCmprsAnnceType | read-write | current | The type of this announcement. |
| 1.3.6.1.4.1.1751.2.18.25.37 | ScalartasCmprsAnnceIntfIndex | read-write | current | Interface index in SSPPCCC format of TASM card on which this announcement is to be compressed. |
| 1.3.6.1.4.1.1751.2.18.25.38 | ScalartasCmprsAction | read-write | current | Action to be performed on this announcement. |
| 1.3.6.1.4.1.1751.2.18.25.39 | ScalartasTstAnnceId | read-write | current | Announcement ID to be played for testing. |
| 1.3.6.1.4.1.1751.2.18.25.40 | ScalartasTstAnnceIntfIndex | read-write | current | Interface index in SSPPCCC format of CE card on which this announcement is to be played for testing. |
| 1.3.6.1.4.1.1751.2.18.25.41 | ScalartasTstAnnceLawType | read-write | current | The type of CE card towards which this announcement is to be played. A-Law is for E1 and U-Law is for DS1 |
| 1.3.6.1.4.1.1751.2.18.25.42 | ScalartasTstAnnceAction | read-write | current | Action to be performed on this announcement for testing. |
| 1.3.6.1.4.1.1751.2.18.25.43 | ScalartasTstLineId | read-write | current | Test ID to be started for line testing. |
| 1.3.6.1.4.1.1751.2.18.25.44 | ScalartasTstLineIntfIndex | read-write | current | Interface index in SSPPCCC format of CE card on which this test is to be initiated. |
| 1.3.6.1.4.1.1751.2.18.25.45 | ScalartasTstLineAction | read-write | current | Test action to be performed. |
| 1.3.6.1.4.1.1751.2.18.25.46 | ScalartasMemIntfIndex | read-write | current | Interface index in SSPPCCC format of TASM card on which the memory is to be initialised. |
| 1.3.6.1.4.1.1751.2.18.25.47 | ScalartasMemAction | read-write | current | Test action to be performed. |
| 1.3.6.1.4.1.1751.2.18.25.48 | ScalartoneAnnceIpAddress | read-write | current | IP Address for announcement ftp server. |
| 1.3.6.1.4.1.1751.2.18.25.49 | ScalartoneAnnceAccountName | read-write | current | ftp account name for access to announcement ftp server. |
| 1.3.6.1.4.1.1751.2.18.25.50 | ScalartoneAnnceAccountPassword | read-write | current | ftp account password for access to announcement ftp server. |
| 1.3.6.1.4.1.1751.2.18.25.51 | ScalartoneAnnceSourceFile | read-write | current | announcement file with complete path on the ftp server |
| 1.3.6.1.4.1.1751.2.18.25.52 | ScalartoneAnnceDestinationFile | read-write | current | The announcementSourceFile will be renamed with MS DOS file format and placed in the /scsi/announce directory on the disk. |
| 1.3.6.1.4.1.1751.2.18.25.53 | ScalartoneAnnceFtpStatus | read-only | current | Current status of the ftp announcement download. Status of the software announcement. noActivity is the initial start state from boot-up. working is set while … |
| 1.3.6.1.4.1.1751.2.18.25.54 | ScalartoneAnnceFtpErrorStatus | read-only | current | The result of the finish of the ftp software announcement download. Set to a value 3-21 if announcementSwCopyStatus is doneWithError. Set to none if announceme… |
| 1.3.6.1.4.1.1751.2.18.25.55 | ScalartoneAnnceFtpAction | read-write | current | start ftp announcement files. When announcementFtpCopyStatus is working, the start request will be ignored. Abort will have effect only when announcementFtpCop… |
| 1.3.6.1.4.1.1751.2.18.26 | Nodegr303Config | |||
| 1.3.6.1.4.1.1751.2.18.26.1 | Nodegr303IgConfig | |||
| 1.3.6.1.4.1.1751.2.18.26.1.1 | Tablegr303IgConfigTable | not-accessible | current | Table of GR303 group configuration |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1 | Rowgr303IgConfigEntry | not-accessible | current | Row definition for GR303 group configuration |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.1 | Columngr303IgId | not-accessible | current | This is used as an index into GR303IG table which recognizes GR303 Interface Group |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.2 | Columngr303IgRowStatus | read-write | current | GR303IG config entry row status |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.3 | Columngr303IgAdminStatus | read-write | current | Administrative status of the GR303IG |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.4 | Columngr303IgPrimaryTMCChanIntfId | read-write | current | Primary TMC channel Interface Id in SSPPCCC format |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.5 | Columngr303IgPrimaryEOCChanIntfId | read-write | current | Primary EOC channel Interface Id in SSPPCCC format |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.6 | Columngr303IgBackupTMCChanIntfId | read-write | current | Backup TMC channel Interface Id in SSPPCCC format |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.7 | Columngr303IgBackupEOCChanIntfId | read-write | current | Backup EOC channel Interface Id in SSPPCCC format |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.8 | Columngr303IgPrimaryTMCStatus | read-only | current | Primary TMC channel Status |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.9 | Columngr303IgPrimaryEOCStatus | read-only | current | Primary EOC channel Status |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.10 | Columngr303IgBackupTMCStatus | read-only | current | Backup TMC channel Status.Value null(5) Indicates that the Backup TMC has not been configured. |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.11 | Columngr303IgBackupEOCStatus | read-only | current | Backup EOC channel Status.Value null(5) Indicates that the Backup EOC has not been configured. |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.12 | Columngr303IgTMCProtSwitchProvState | read-write | current | Lock/Unlock the protection switch |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.13 | Columngr303IgEOCProtSwitchProvState | read-write | current | Lock/Unlock the protection switch |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.14 | Columngr303IgTMCProtSwitchCommand | read-write | current | User command to do path protection switch |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.15 | Columngr303IgEOCProtSwitchCommand | read-write | current | User command to do path protection switch |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.16 | Columngr303IgLocalDigitalSwitchType | read-write | current | LDS (IDT) type |
| 1.3.6.1.4.1.1751.2.18.26.1.1.1.17 | Columngr303IgLocalDigitalSwitchVersion | read-write | current | LDS (IDT)Version |
| 1.3.6.1.4.1.1751.2.18.26.1.2 | Tablegr303IgIntfConfigTable | not-accessible | current | Table of interface attributes in an GR303IG |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1 | Rowgr303IgIntfConfigEntry | not-accessible | current | Row definition for GR303 Access Arrangement Interface configuration |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1.1 | Columngr303IntfIgId | not-accessible | current | This is used as an index into GR303Ig table which recognizes GR303 Interface Group. This is used as a first index into this interface table. |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1.2 | Columngr303IgIntfId | not-accessible | current | This is used as an index into IG interface table which recognizes GR303 Ig interfaces. This is used as a second index into this table |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1.3 | Columngr303IgIntfPhysId | read-write | current | Interface's Physical ID (SSPPCCC) |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1.4 | Columngr303IgIntfNetId | read-only | current | gr303Ig Interface (DS1) Net Id assigned by the network |
| 1.3.6.1.4.1.1751.2.18.26.1.2.1.5 | Columngr303IgIntfRowStatus | read-write | current | GR303IG interface entry row status - row status can not be made active until all the values are set |
| 1.3.6.1.4.1.1751.2.18.26.1.4 | Tablegr303LapdConfigTable | not-accessible | current | Table of LAPD attributes in an GR303IG |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1 | Rowgr303LapdConfigEntry | not-accessible | current | Row definition for LAPD attributes in a GR303IG |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1.1 | Columngr303LapdIgId | not-accessible | current | GR303IG Number index which recognizes GR303 Interface group |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1.2 | Columngr303T200 | read-write | current | value of Lapd T200 timer in miliseconds in step size of 50 ms |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1.3 | Columngr303T203 | read-write | current | value of Lapd T203 timer in seconds |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1.4 | Columngr303N200 | read-write | current | Maximum number of retransmissions |
| 1.3.6.1.4.1.1751.2.18.26.1.4.1.5 | Columngr303K | read-write | current | Maximum number of outstanding I frames - Lapd - window size. |
| 1.3.6.1.4.1.1751.2.18.26.1.5 | Tablegr303TMCConfigTable | not-accessible | current | Table of Layer 3 attributes in an GR303IG |
| 1.3.6.1.4.1.1751.2.18.26.1.5.1 | Rowgr303TMCConfigEntry | not-accessible | current | Row definition for GR303 Access Arrangement Layer3 parameters configuration |
| 1.3.6.1.4.1.1751.2.18.26.1.5.1.1 | Columngr303TMCIgId | not-accessible | current | GR303IG Number index which recognizes GR303 Interface group |
| 1.3.6.1.4.1.1751.2.18.26.1.5.1.2 | Columngr303TMCT303 | read-write | current | value of TMC T303 timer in miliseconds with a step size of 500 ms |
| 1.3.6.1.4.1.1751.2.18.26.1.5.1.3 | Columngr303TMCT396 | read-write | current | value of TMC T396 timer in miliseconds with a step size of 1000 ms |
| 1.3.6.1.4.1.1751.2.18.27 | Nodegr303Stats | |||
| 1.3.6.1.4.1.1751.2.18.27.1 | Nodegr303IgStats | |||
| 1.3.6.1.4.1.1751.2.18.27.1.1 | Tablegr303IgStatsTable | not-accessible | current | Table of GR303 GR303IG based stats attributes |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1 | Rowgr303IgStatsEntry | not-accessible | current | Row definition for GR303 GR303IG based stats |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.1 | Columngr303IgStatsIgId | not-accessible | current | This is used as an index into GR303 Ig table which recognizes GR303 Interface Group Interface group |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.2 | Columngr303IgStatsCurrentInCalls | read-only | current | Total number of Currently established incoming calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.3 | Columngr303IgStatsCurrentOutCalls | read-only | current | Total number of Currently established outgoing calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.4 | Columngr303IgStatsOutCallSuccessful | read-only | current | Total number successful outgoing calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.5 | Columngr303IgStatsOutCallFailed | read-only | current | Total number of Failed outgoing calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.6 | Columngr303IgStatsInCallSuccessful | read-only | current | Total number successful incoming calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.7 | Columngr303IgStatsInCallFailed | read-only | current | Total number of Failed incoming calls |
| 1.3.6.1.4.1.1751.2.18.27.1.1.1.8 | Columngr303IgStatsReset | read-write | current | gr303Ig reset statistics button |
| 1.3.6.1.4.1.1751.2.18.28 | NodeatmTrunkingMIBObjects | |||
| 1.3.6.1.4.1.1751.2.18.28.1 | NodeatmTrunkingIWFBaseGroup | |||
| 1.3.6.1.4.1.1751.2.18.28.1.1 | ScalaratmTrunkingIWFIdentifier | read-write | current | IWF ID for the local endpoint |
| 1.3.6.1.4.1.1751.2.18.28.1.2 | ScalaratmTrunkingIWFLocalAddress | read-write | current | IWF ATM address for the local endpoint |
| 1.3.6.1.4.1.1751.2.18.28.1.3 | ScalaratmTrunkingIWFMaxRemoteIWF | read-write | current | Maximum remote IWF that can connect to this endpoint |
| 1.3.6.1.4.1.1751.2.18.28.1.4 | ScalaratmTrunkingIWFAdminStatus | read-write | current | Indicates whether the Local IWF is active or not |
| 1.3.6.1.4.1.1751.2.18.28.2 | TableatmTrunkingRemoteIWFTable | not-accessible | current | Remote IWF table |
| 1.3.6.1.4.1.1751.2.18.28.2.1 | RowatmTrunkingRemoteIWFEntry | not-accessible | current | Entry in atmTrunkingRemoteIWFTable |
| 1.3.6.1.4.1.1751.2.18.28.2.1.1 | ColumnatmTrunkingRemoteIWFIdentifier | not-accessible | current | IWF ID for the remote IWF |
| 1.3.6.1.4.1.1751.2.18.28.2.1.2 | ColumnatmTrunkingRemoteIWFAddress | read-create | current | IWF ATM address for the remote IWF |
| 1.3.6.1.4.1.1751.2.18.28.2.1.3 | ColumnatmTrunkingRemoteIWFTrnkMode | read-create | current | Maximum remote IWF that can connect to this endpoint |
| 1.3.6.1.4.1.1751.2.18.28.2.1.4 | ColumnatmTrunkingRemoteIWFAdminStatus | read-create | current | Indicates whether the Local IWF is active or not |
| 1.3.6.1.4.1.1751.2.18.28.2.1.5 | ColumnatmTrunkingRemoteIWFRowStatus | read-create | current | Maximum remote IWF that can connect to this endpoint |
| 1.3.6.1.4.1.1751.2.18.28.3 | TableatmTrunkingSigVccTable | not-accessible | current | Table of iwf signaling vcc configuration entities |
| 1.3.6.1.4.1.1751.2.18.28.3.1 | RowatmTrunkingSigVccEntry | not-accessible | current | Entry in atmTrunkingSigVccTable |
| 1.3.6.1.4.1.1751.2.18.28.3.1.1 | ColumnatmTrunkingSigVccRmtIWFIdentifier | not-accessible | current | IWF ID for the remote IWF |
| 1.3.6.1.4.1.1751.2.18.28.3.1.2 | ColumnatmTrunkingSigVccIdentifier | not-accessible | current | Vcc ID assigned by the owner of this signaling Vcc |
| 1.3.6.1.4.1.1751.2.18.28.3.1.3 | ColumnatmTrunkingSigVccOutgoingIfIndex | read-create | current | Intf index of the outgoing interface,readonly for SVC/SPVC |
| 1.3.6.1.4.1.1751.2.18.28.3.1.4 | ColumnatmTrunkingSigVccOutgoingVpi | read-create | current | VPI used at the outgoing interface, readonly for SVC/SPVC |
| 1.3.6.1.4.1.1751.2.18.28.3.1.5 | ColumnatmTrunkingSigVccOutgoingVci | read-create | current | VCI used at the outgoing interface, readonly for SVC/SPVC |
| 1.3.6.1.4.1.1751.2.18.28.3.1.6 | ColumnatmTrunkingSigVccOwner | read-create | current | Indicates who is the owner of the Sig VCC |
| 1.3.6.1.4.1.1751.2.18.28.3.1.7 | ColumnatmTrunkingSigVccInactiveTimer | read-create | current | Inactive time period on which to clear the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.8 | ColumnatmTrunkingSigVccType | read-create | current | Indicates if the SigVcc should be setup as PVC/SPVC/SVC |
| 1.3.6.1.4.1.1751.2.18.28.3.1.9 | ColumnatmTrunkingSigVccSignaling | read-create | current | Indicates the signalling protocol used between the IWFs |
| 1.3.6.1.4.1.1751.2.18.28.3.1.10 | ColumnatmTrunkingSigVccFwPcr01 | read-create | current | Forward PCR for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.11 | ColumnatmTrunkingSigVccBwPcr01 | read-create | current | Backward PCR for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.12 | ColumnatmTrunkingSigVccFwScr01 | read-create | current | Forward SCR for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.13 | ColumnatmTrunkingSigVccBwScr01 | read-create | current | Backward SCR for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.14 | ColumnatmTrunkingSigVccFwMbs01 | read-create | current | Forward MBS for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.15 | ColumnatmTrunkingSigVccBwMbs01 | read-create | current | Backward MBS for the call |
| 1.3.6.1.4.1.1751.2.18.28.3.1.16 | ColumnatmTrunkingSigVccMaxAal2Vcc | read-create | current | Maximum number of bearer VCCs controlled by this SigVcc |
| 1.3.6.1.4.1.1751.2.18.28.3.1.17 | ColumnatmTrunkingSigVccActiveAal2Vcc | read-only | current | Number of active bearer VCCs controlled by this SigVcc |
| 1.3.6.1.4.1.1751.2.18.28.3.1.18 | ColumnatmTrunkingSigVccOperStatus | read-only | current | Indicates whether the Local IWF is active or not |
| 1.3.6.1.4.1.1751.2.18.28.3.1.19 | ColumnatmTrunkingSigVccRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.1751.2.18.28.3.1.20 | ColumnatmTrunkingSigVccViB | read-create | current | VI to associate the Egress part of A2B connection |
| 1.3.6.1.4.1.1751.2.18.28.3.1.21 | ColumnatmTrunkingSigVccVUNIB | read-create | current | VUNI associated the Egress part of A2B connection |
| 1.3.6.1.4.1.1751.2.18.28.3.1.22 | ColumnatmTrunkingSigVccRetryTimer | read-create | current | the time(seconds) to wait before attempting to establish the ATM Trunking Signalling VCC SPVC after previous failed call attempt. 0 indicates retries will be a… |
| 1.3.6.1.4.1.1751.2.18.28.3.1.23 | ColumnatmTrunkingSigVccRetryLimit | read-create | current | ATM Trunking Signalling VCC SPVC Retry Limit. 0 indicates unlimited |
| 1.3.6.1.4.1.1751.2.18.28.3.1.24 | ColumnatmTrunkingSigVccRestart | read-write | current | The active ATM Trunking SPVC is released, if necessary, and a new setup procedure is begun if restart, otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.28.3.1.25 | ColumnatmTrunkingSigVccPriority | read-write | current | Priority of TrunkingSigVcc - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.28.3.1.26 | ColumnatmTrunkingSigVccRetryCounter | read-only | current | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SigVcc SPVC is restar… |
| 1.3.6.1.4.1.1751.2.18.28.4 | TableatmTrunkingBrVccConfigTable | not-accessible | current | Table of iwf aal2 bearer vcci configuration entities |
| 1.3.6.1.4.1.1751.2.18.28.4.1 | RowatmTrunkingBrVccConfigEntry | not-accessible | current | Row definition for iwf aal2 vcci configuration |
| 1.3.6.1.4.1.1751.2.18.28.4.1.1 | ColumnatmTrunkingBrVccRmtIWFId | not-accessible | current | IWF ID for the remote IWF |
| 1.3.6.1.4.1.1751.2.18.28.4.1.2 | ColumnatmTrunkingBrVccSigVccId | read-only | current | Signalling Vcc associated with this Br Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.3 | ColumnatmTrunkingBrVccId | not-accessible | current | Id of the AAL2 Bear Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.4 | ColumnatmTrunkingBrVccIf | read-create | current | Intf index of the outgoing interface, readonly for SVC/SPVC |
| 1.3.6.1.4.1.1751.2.18.28.4.1.5 | ColumnatmTrunkingBrVccVpi | read-create | current | VPI value of this VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.28.4.1.6 | ColumnatmTrunkingBrVccVci | read-create | current | VCI value of this VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.28.4.1.7 | ColumnatmTrunkingBrVccViB | read-create | current | VI to associate the Egress part of A2B connection |
| 1.3.6.1.4.1.1751.2.18.28.4.1.8 | ColumnatmTrunkingBrVccVUNIB | read-create | current | VUNI associated the Egress part of A2B connection |
| 1.3.6.1.4.1.1751.2.18.28.4.1.9 | ColumnatmTrunkingBrVccServiceType | read-create | current | service type |
| 1.3.6.1.4.1.1751.2.18.28.4.1.10 | ColumnatmTrunkingBrVccSarType | read-create | current | sar type |
| 1.3.6.1.4.1.1751.2.18.28.4.1.11 | ColumnatmTrunkingBrVccOwner | read-create | current | The owner of this Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.12 | ColumnatmTrunkingBrVccOperStatus | read-only | current | The Operational Status of this Bearer Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.13 | ColumnatmTrunkingBrVccFwAtmPcr01 | read-create | current | Forward pcr (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.14 | ColumnatmTrunkingBrVccBwAtmPcr01 | read-create | current | Backward pcr (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.15 | ColumnatmTrunkingBrVccFwAtmScr01 | read-create | current | Forward scr (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.16 | ColumnatmTrunkingBrVccBwAtmScr01 | read-create | current | Backward scr (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.17 | ColumnatmTrunkingBrVccFwAtmMbs01 | read-create | current | Forward Mbs (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.18 | ColumnatmTrunkingBrVccBwAtmMbs01 | read-create | current | Backward Mbs (0+1) |
| 1.3.6.1.4.1.1751.2.18.28.4.1.19 | ColumnatmTrunkingBrVccConnType | read-create | current | connection type |
| 1.3.6.1.4.1.1751.2.18.28.4.1.20 | ColumnatmTrunkingBrVccActiveChanCnt | read-only | current | Number of currently active channels in this Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.21 | ColumnatmTrunkingBrVccMaxAal2ChanId | read-create | current | Max Id of channels supported within this br vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.22 | ColumnatmTrunkingBrVccCircuitModeDataSupp | read-create | current | Circuit mode data |
| 1.3.6.1.4.1.1751.2.18.28.4.1.23 | ColumnatmTrunkingBrVccFrameModeSupp | read-create | current | Frame mode data |
| 1.3.6.1.4.1.1751.2.18.28.4.1.24 | ColumnatmTrunkingBrVccFaxModSupp | read-create | current | FAX Demodulation |
| 1.3.6.1.4.1.1751.2.18.28.4.1.25 | ColumnatmTrunkingBrVccCASPktXportSupp | read-create | current | Channel Associated Signaling |
| 1.3.6.1.4.1.1751.2.18.28.4.1.26 | ColumnatmTrunkingBrVccDTMFPktXportSupp | read-create | current | DTMF Dialed Digits |
| 1.3.6.1.4.1.1751.2.18.28.4.1.27 | ColumnatmTrunkingBrVccMFR1PktXportSupp | read-create | current | MF-R1 Dialed Digits |
| 1.3.6.1.4.1.1751.2.18.28.4.1.28 | ColumnatmTrunkingBrVccMFR2PktXportSupp | read-create | current | MF-R2 Dialed Digits |
| 1.3.6.1.4.1.1751.2.18.28.4.1.29 | ColumnatmTrunkingBrVccPCMEncoding | read-create | current | DTMF Dialed Digits |
| 1.3.6.1.4.1.1751.2.18.28.4.1.30 | ColumnatmTrunkingBrVccMaxFrameLength | read-create | current | Maximum length of frame mode data |
| 1.3.6.1.4.1.1751.2.18.28.4.1.31 | ColumnatmTrunkingBrVccIdleChannSuprSupp | read-create | current | Idle Channel Supression |
| 1.3.6.1.4.1.1751.2.18.28.4.1.32 | ColumnatmTrunkingBrVccSilenceDetSupp | read-create | current | Silence Detection |
| 1.3.6.1.4.1.1751.2.18.28.4.1.33 | ColumnatmTrunkingBrVccCompressionSpec | read-create | current | Compression Type |
| 1.3.6.1.4.1.1751.2.18.28.4.1.34 | ColumnatmTrunkingBrVccAudioProfileSource | read-create | current | Profile Source |
| 1.3.6.1.4.1.1751.2.18.28.4.1.35 | ColumnatmTrunkingBrVccAudioProfileId | read-create | current | Profile ID |
| 1.3.6.1.4.1.1751.2.18.28.4.1.36 | ColumnatmTrunkingBrVccAvailBw | read-only | current | Available Bandwidth left in this Vcc |
| 1.3.6.1.4.1.1751.2.18.28.4.1.37 | ColumnatmTrunkingBrVccRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.1751.2.18.28.4.1.38 | ColumnatmTrunkingBrVccGr303Supp | read-create | current | GR303 Support |
| 1.3.6.1.4.1.1751.2.18.28.4.1.39 | ColumnatmTrunkingBrVccOamStatus | read-write | current | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it wi… |
| 1.3.6.1.4.1.1751.2.18.28.4.1.40 | ColumnatmTrunkingBrVccInactiveTimer | read-create | current | The time(in seconds) to wait before releasing the ATM Trunking Bearer VCC SVC after all narrow band calls are dropped |
| 1.3.6.1.4.1.1751.2.18.28.4.1.41 | ColumnatmTrunkingBrVccRetryTimer | read-create | current | the time(seconds) to wait before attempting to establish the ATM Trunking Bearer VCC SPVC after previous failed call attempt. 0 indicates retries will be attem… |
| 1.3.6.1.4.1.1751.2.18.28.4.1.42 | ColumnatmTrunkingBrVccRetryLimit | read-create | current | ATM Trunking Bearer VCC SPVC Retry Limit. 0 indicates unlimited |
| 1.3.6.1.4.1.1751.2.18.28.4.1.43 | ColumnatmTrunkingBrVccRestart | read-write | current | The active ATM Trunking BrVcc SPVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.28.4.1.44 | ColumnatmTrunkingBrVccCuTimer | read-write | current | CuTimer represents combined use timer, is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the … |
| 1.3.6.1.4.1.1751.2.18.28.4.1.45 | ColumnatmTrunkingBrVccPriority | read-write | current | Priority of TrunkingBrVcc - priority-1 being highest priority . |
| 1.3.6.1.4.1.1751.2.18.28.4.1.46 | ColumnatmTrunkingBrVccRetryCounter | read-only | current | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the BrVcc SPVC is restart… |
| 1.3.6.1.4.1.1751.2.18.28.5 | TableatmTrunkingDataChannelConfigTable | not-accessible | current | Table of iwf aal2 data channel configuration entities |
| 1.3.6.1.4.1.1751.2.18.28.5.1 | RowatmTrunkingDataChannelConfigEntry | not-accessible | current | Row definition for iwf aal2 data channel configuration |
| 1.3.6.1.4.1.1751.2.18.28.5.1.1 | ColumnatmTrunkingDataChannelRmtIWFId | not-accessible | current | IWF ID for the remote IWF |
| 1.3.6.1.4.1.1751.2.18.28.5.1.2 | ColumnatmTrunkingDataChannelSigVccId | read-only | current | Vcc ID assigned by the owner of this signaling Vcc |
| 1.3.6.1.4.1.1751.2.18.28.5.1.3 | ColumnatmTrunkingDataChannelBrVccId | not-accessible | current | Id of the AAL2 Bear Vcc |
| 1.3.6.1.4.1.1751.2.18.28.5.1.4 | ColumnatmTrunkingDataChannelId | not-accessible | current | The AAL2 Channel Id of this channel |
| 1.3.6.1.4.1.1751.2.18.28.5.1.5 | ColumnatmTrunkingDataChanOperStatus | read-only | current | Operational Status of this channel |
| 1.3.6.1.4.1.1751.2.18.28.5.1.6 | ColumnatmTrunkingDataChanOwner | read-only | current | The owner of this channel |
| 1.3.6.1.4.1.1751.2.18.28.5.1.7 | ColumnatmTrunkingDataChanNBIntf | read-only | current | The index of narrowband interface this channel is mapped to |
| 1.3.6.1.4.1.1751.2.18.29 | NodeprotectionGroup | |||
| 1.3.6.1.4.1.1751.2.18.29.1 | TableprotectionGroupTable | not-accessible | current | Table of interface protection group attributes |
| 1.3.6.1.4.1.1751.2.18.29.1.1 | RowprotectionGroupEntry | not-accessible | current | Defines one interface protection group |
| 1.3.6.1.4.1.1751.2.18.29.1.1.1 | ColumnpgtGroupId | not-accessible | current | a user selected logical number representing a protection group uniquely within a PSAX |
| 1.3.6.1.4.1.1751.2.18.29.1.1.2 | ColumnpgtSwitchoverMethod | read-write | current | switchover method to switch traffic from failed primary interface to available standby interface. In auto method, PSAX automatically switches the traffic witho… |
| 1.3.6.1.4.1.1751.2.18.29.1.1.3 | ColumnpgtSwitchbackMethod | read-write | current | switchback method to switch traffic from a standby to its corresponding recovered primary interface. In auto method, PSAX automatically switches the traffic wi… |
| 1.3.6.1.4.1.1751.2.18.29.1.1.4 | ColumnpgtStandbySelection | read-write | current | |
| 1.3.6.1.4.1.1751.2.18.29.1.1.5 | ColumnpgtRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.29.2 | TableinterfaceProtectionTable | not-accessible | current | Table of interface protection attributes |
| 1.3.6.1.4.1.1751.2.18.29.2.1 | RowinterfaceProtectionEntry | not-accessible | current | Defines attributes for interface protection |
| 1.3.6.1.4.1.1751.2.18.29.2.1.1 | ColumniptGroupId | not-accessible | current | a user selected logical number representing a protection group uniquely within a PSAX. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.2 | ColumniptLogicalIntfId | not-accessible | current | Logical interface number assigned by user |
| 1.3.6.1.4.1.1751.2.18.29.2.1.3 | ColumniptPhysicalIntfId | read-write | current | physical interface in SSPPCCC format |
| 1.3.6.1.4.1.1751.2.18.29.2.1.4 | ColumniptIntfType | read-write | current | interface primary or secondary. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.5 | ColumniptOperState | read-only | current | indicates operational state of the interface. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.6 | ColumniptOperatingIntf | read-only | current | protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.7 | ColumniptProtCommand | read-write | current | protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.8 | ColumniptSelectedStandby | read-write | current | Standby interface logical number on which to switch traffic. Used only in case of manual switchover with explicit standby selection. |
| 1.3.6.1.4.1.1751.2.18.29.2.1.9 | ColumniptRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.1751.2.18.30 | Nodeh248Config | |||
| 1.3.6.1.4.1.1751.2.18.30.1 | Tableh248TermIdTable | not-accessible | current | Table of H.248 Terminations |
| 1.3.6.1.4.1.1751.2.18.30.1.1 | Rowh248TermIdEntry | not-accessible | current | Row definition for H.248 Termination ID table |
| 1.3.6.1.4.1.1751.2.18.30.1.1.1 | Columnh248TermSlotId | not-accessible | current | Slot # for termination |
| 1.3.6.1.4.1.1751.2.18.30.1.1.2 | Columnh248TermPhyPortId | not-accessible | current | Physical Port # for termination |
| 1.3.6.1.4.1.1751.2.18.30.1.1.3 | Columnh248TermLogPortId | not-accessible | current | Logical Port # for termination |
| 1.3.6.1.4.1.1751.2.18.30.1.1.4 | Columnh248TermChanId | not-accessible | current | Chan # for termination |
| 1.3.6.1.4.1.1751.2.18.30.1.1.5 | Columnh248TermVpi | not-accessible | current | VPI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VPI = h248TermVpi - 1, for h248TermVpi > 0. |
| 1.3.6.1.4.1.1751.2.18.30.1.1.6 | Columnh248TermVci | not-accessible | current | VCI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VCI = h248TermVci - 1, for h248TermVci > 0. |
| 1.3.6.1.4.1.1751.2.18.30.1.1.7 | Columnh248TermId | read-write | current | Termination ID is provisioned by user and used for identifying termination between MGC and MG |
| 1.3.6.1.4.1.1751.2.18.30.1.1.8 | Columnh248TermAal2Cid | read-write | current | AAL2 CID |
| 1.3.6.1.4.1.1751.2.18.30.1.1.9 | Columnh248TermActivation | read-write | current | Activation for termination ID |
| 1.3.6.1.4.1.1751.2.18.30.1.1.10 | Columnh248TermRowStatus | read-write | current | h248TermIdEntry row status |
| 1.3.6.1.4.1.1751.2.18.31 | Nodeh248SysControl | |||
| 1.3.6.1.4.1.1751.2.18.31.1 | Scalarh248MaxNumberOfContexts | read-write | current | The value of the property gives the maximum number of contexts that can exist at anytime. The NULL context is not included in this number. |
| 1.3.6.1.4.1.1751.2.18.31.2 | Scalarh248MaxTerminationsPerContext | read-write | current | The max number of terminations allowed in a context. |
| 1.3.6.1.4.1.1751.2.18.31.3 | Scalarh248NormalMGExecutionTime | read-write | current | Settable by the MGC to indicate the interval within which the MGC expects a response to any transaction from the MG (exclusive of the network delay). Value rep… |
| 1.3.6.1.4.1.1751.2.18.31.4 | Scalarh248NormalMGCExecutionTime | read-write | current | Settable by the MGC to indicate the interval within which the MG expects a response to any transaction from the MG (exclusive of the network delay). Value repr… |
| 1.3.6.1.4.1.1751.2.18.31.5 | Scalarh248MGProvisionalResponseTimerValue | read-write | current | Indicates the time within which the MGC should expect a Pending Response from the MG if a Transaction can not be completed. Initially set to h248NormalMGExecut… |
| 1.3.6.1.4.1.1751.2.18.31.6 | Scalarh248MGCProvisionalResponseTimerValue | read-write | current | Indicates the time within which the MG should expect a Pending Response from the MGC if a Transaction can not be completed. Initially set to h248NormalMGCExecu… |
| 1.3.6.1.4.1.1751.2.18.31.7 | Scalarh248MGCIpAddress1 | read-write | current | The IP address of the 1st MGC. |
| 1.3.6.1.4.1.1751.2.18.31.8 | Scalarh248MGCIpAddress2 | read-write | current | The IP address of the 2nd MGC. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmConnFailureCause | INTEGER { none(1), physical(2), oamAis(3), oamRdi(4) } | current | ATM connection failure cause |
| ConnFailureCause | INTEGER { none(1), physical(2) } | current | General connection failure cause |
| FrConnFailureCause | INTEGER { none(1), physical(2), lmi(3), dlci(4) } | current | Frame Relay connection failure cause |
| ImaGrpChannelEndState | INTEGER { notConfigured(1), startUp(2), startUpAck(3), cfgAbtUnsupportedM(4), cfgAbtIncSymmetry(5), cfgAbtOther(6), insufficientLinks(7), blocked(8), operational(9) } | current | The current operational state of the Near-end or far-end IM A Group State Machine. |
| IntfIndex | Integer32 | current | A INTEGER |