ADAPTECDURALINK-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.795 | Nodeadaptec | |||
| 1.3.6.1.4.1.795.3 | Nodeproducts | |||
| 1.3.6.1.4.1.795.3.1 | Nodenic | |||
| 1.3.6.1.4.1.795.3.1.2 | Nodenpg | |||
| 1.3.6.1.4.1.795.3.1.2.3 | Nodeduralink | |||
| 1.3.6.1.4.1.795.3.1.2.3.1 | NodeduralinkStatusTrap | The port status has changed. | ||
| 1.3.6.1.4.1.795.3.1.2.3.1 | Nodeinformation | |||
| 1.3.6.1.4.1.795.3.1.2.3.1.1 | ScalarnumInterfaces | read-only | mandatory | The number of Adaptec network interfaces present on this system. |
| 1.3.6.1.4.1.795.3.1.2.3.1.2 | ScalarnumPorts | read-only | mandatory | The number of Adaptec network ports present on this system. |
| 1.3.6.1.4.1.795.3.1.2.3.1.3 | ScalarnumCards | read-only | mandatory | The number of Adaptec network adapters present on this system. |
| 1.3.6.1.4.1.795.3.1.2.3.2 | TableinterfaceStatsTable | not-accessible | mandatory | The table listing Adaptec network interface statistics. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1 | RowinterfaceStatsEntry | not-accessible | mandatory | Each entry lists statistics for a single network interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.1 | ColumniInterfaceIndex | read-only | mandatory | A unique value assigned to each interface This is an increasing numeric value ranging between 1 and the value of NumInterfaces. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.2 | ColumniInterfaceName | read-only | mandatory | The descriptive name assigned to the interface at the time the interface was configured. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.3 | ColumniInterfacePorts | read-only | mandatory | The number of ports in the interface. An interface may consist of one or more ports. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.4 | ColumniPermNetAddress | read-only | mandatory | The permanent network address assigned to this interface. This is the node address stored permanently in the adapter. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.5 | ColumniCurrentNetAddress | read-only | mandatory | The network address currently assigned this interface. This address may be administered by software. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.6 | ColumniDataRate | read-only | mandatory | This is the rate at which data is transferred over this interface, measured in MPBS. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.7 | ColumniTotalPacketsTransmitted | read-only | mandatory | This is the total number of packets transmitted over this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.8 | ColumniTotalBytesTransmitted | read-only | mandatory | This is the total number of bytes transmitted over this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.9 | ColumniTotalPacketsReceived | read-only | mandatory | This is the total number of packets received over this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.10 | ColumniTotalBytesReceived | read-only | mandatory | This is the total number of bytes received over this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.11 | ColumniTotalTransmitErrors | read-only | mandatory | This is the total number of Transmit errors seen on this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.12 | ColumniTotalReceiveErrors | read-only | mandatory | This is the total number of Receive errors seen on this interface. |
| 1.3.6.1.4.1.795.3.1.2.3.2.1.13 | ColumniInterfaceType | read-only | mandatory | This is the interface type. standalone indicates a single port configuration. failover indicates a two port group supporting failover resiliency. loadBalanced … |
| 1.3.6.1.4.1.795.3.1.2.3.3 | TableportStatsTable | not-accessible | mandatory | The table listing Adaptec network port statistics. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1 | RowportStatsEntry | not-accessible | mandatory | Each entry lists statistics for a single network port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.1 | ColumnpInterfaceIndex | read-only | mandatory | A unique value assigned to each interface This is an increasing numeric value ranging between 1 and the value of NumInterfaces. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.2 | ColumnpPortIndex | read-only | mandatory | A unique value assigned to each port on a particular interface. This is an increasing numeric value ranging between 1 and the value of iInterfacePorts for the … |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.3 | ColumnpPortName | read-only | mandatory | The descriptive name assigned to the port. This may not be supported by all operating systems. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.4 | ColumnpCardNumber | read-only | mandatory | The value of cpCardIndex that corresponds to this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.5 | ColumnpCardPortNumber | read-only | mandatory | The value of cpPortIndex that corresponds to this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.6 | ColumnpPermNetAddress | read-only | mandatory | The permanent network address assigned to this port. This is the node address stored permanently in the adapter. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.7 | ColumnpCurrentNetAddress | read-only | mandatory | The network address currently assigned to this port. This address may be administered by software. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.8 | ColumnpDataRate | read-only | mandatory | This is the rate at which data is transferred over this port, measured in MPBS. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.9 | ColumnpTotalPacketsTransmitted | read-only | mandatory | This is the total number of packets transmitted over this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.10 | ColumnpTotalBytesTransmitted | read-only | mandatory | This is the total number of bytes transmitted over this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.11 | ColumnpTotalPacketsReceived | read-only | mandatory | This is the total number of packets received over this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.12 | ColumnpTotalBytesReceived | read-only | mandatory | This is the total number of bytes received over this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.13 | ColumnpTotalTransmitErrors | read-only | mandatory | This is the total number of transmit errors seen on this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.14 | ColumnpTotalReceiveErrors | read-only | mandatory | This is the total number of receive errors seen on this port. |
| 1.3.6.1.4.1.795.3.1.2.3.3.1.15 | ColumnpStatus | read-only | mandatory | The current status of the port. portActive indicates a functioning port. portDown indicates a port that is not functioning. portDisabled indicates a port that … |
| 1.3.6.1.4.1.795.3.1.2.3.4 | TablecardInformationTable | not-accessible | mandatory | A table listing Adaptec network card information. |
| 1.3.6.1.4.1.795.3.1.2.3.4.1 | RowcardInformationEntry | not-accessible | mandatory | Each entry lists information about a single network card. |
| 1.3.6.1.4.1.795.3.1.2.3.4.1.1 | ColumncCardIndex | read-only | mandatory | A unique value assigned to each network card. This is an increasing numeric value ranging between 1 and the value of NumCards. |
| 1.3.6.1.4.1.795.3.1.2.3.4.1.2 | ColumncCardDescription | read-only | mandatory | The descriptive name assigned to the network card. |
| 1.3.6.1.4.1.795.3.1.2.3.4.1.3 | ColumncPortsOnCard | read-only | mandatory | The number of ports on the network card. |
| 1.3.6.1.4.1.795.3.1.2.3.5 | TablecardPortInfoTable | not-accessible | mandatory | This table indicates the interface and port number associated with each port on all installed network cards. |
| 1.3.6.1.4.1.795.3.1.2.3.5.1 | RowcardPortInfoEntry | not-accessible | mandatory | Each entry lists information for a single port on a network card. |
| 1.3.6.1.4.1.795.3.1.2.3.5.1.1 | ColumncpCardIndex | read-only | mandatory | A unique value assigned to each network card. This is an increasing numeric value ranging between 1 and the value of NumCards. |
| 1.3.6.1.4.1.795.3.1.2.3.5.1.2 | ColumncpPortIndex | read-only | mandatory | A unique value assigned to each port on a particular network card. This is an increasing numeric value ranging between 1 and the value of cPortsOnCard for the … |
| 1.3.6.1.4.1.795.3.1.2.3.5.1.3 | ColumncpInterfaceNumber | read-only | mandatory | The value of pInterfaceIndex that corresponds to this port. If this port is not part of an interface it will be set to 0 |
| 1.3.6.1.4.1.795.3.1.2.3.5.1.4 | ColumncpPortNumber | read-only | mandatory | The value of pPortIndex that corresponds to this port. If this port is not part of an interface it will be set to 0 |
| 1.3.6.1.4.1.795.3.1.2.3.5.1.5 | ColumncpTableNumber1 | read-only | mandatory | The value of Lan Adapter component table rows that correspond to this port. This provides a mapping to entries in an SNMP implementation of the Desktop Managem… |