ADC-FLEXWAVE-URH-MIB
560 objects
This is the MIB for managing entities associated with FlexWave Prism & InterReach SPECTRUM products for SW Version 8.1
Imported Objects
| ADC-FWU-URH-TC-MIB MISSING | ALARMEnable ALARMManage ALARMType BANDType CATALOGType CONTACTType DELAYType DuplexerType ENETType GAINType LNAType MODEType MODULEType OPTICSType RauBandType UnitID2 UnitID3 UnitType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2014 | Nodeadc | |||
| 1.3.6.1.4.1.2014.15 | Nodeflexwave | |||
| 1.3.6.1.4.1.2014.15.2 | Nodeflexwaveurh | |||
| 1.3.6.1.4.1.2014.15.2.1 | IdentityflexwaveURHMibModule | This is the MIB for managing entities associated with FlexWave Prism & InterReach SPECTRUM products for SW Version 8.1 | ||
| 1.3.6.1.4.1.2014.15.2.1.1 | NodefwuHostUnitObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1 | NodefwuHstSystemLevelObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.1 | NodefwuHstSystemLevelInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1 | NodefwuHstGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.1 | ScalarfwuHstNumber | read-only | current | Host Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.2 | ScalarfwuHstName | read-write | current | User defined name of the host unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Ma… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.3 | ScalarfwuHstUnitReset | read-write | current | Use to reset the Host. Do this by changing from normal(0) to reset(1). After the operation has completed the state automatically changes to normal. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.4 | ScalarfwuHstBackPlaneRev | read-only | current | The back plane revision of the Host (It is the three pin version number of the chassis back plane). |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.5 | ScalarfwuHstAlarmStatusSummary | read-only | current | Summary of alarm status on the Host. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.6 | ScalarfwuHstTempMeas | read-only | current | Host system temperature value in Celsius. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.7 | ScalarfwuSystemAlarmStatusSummary | read-only | current | Summary of alarm status on the System. If there a unit in the system (Host and all remotes) with a fault condition, it will be reflected here. Severity is summ… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.9 | ScalarfwuHstSystemDateAndTime | read-write | current | Date and Time settings on the system. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.11 | ScalarfwuAlarmAck | read-write | current | Provision to acknowledgement one or all alarms in the system. Set 0 to acknowledge all alarms or the alarm code (numeric ID) of the alarm to be acknowledged. T… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.12 | ScalarfwuAlarmLevel | read-write | current | Alarm status summary of system. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.13 | ScalarfwuUserCommLinkTest | read-write | current | Provision to perform the system test manually. Set the value to 1 to initiate the test. Once started, the test cannot be cancelled. User has to wait for comple… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.14 | ScalarfwuUserLinkTestStatus | read-only | current | Provides the status of the System/Link test, once the test has started. Start the test using fwuUserCommLinkTest. Status is reported in the format X;Y where X … |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.15 | ScalarfwuUserCommLinkTestDartBandType | read-write | current | Bands on which the system test is to be run. Refer TC BANDType for list. 0 to select all provisioned bands for the test. If a non-zero value is provided here t… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.16 | ScalarfwuUserCommLinkTestDartId | read-write | current | Identify the DARTs on which the system test is to be run. It is the DART slot number on Host unit. Use 0 to select all provisioned DARTs for the test. Other va… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.17 | ScalarfwuClearSysConfig | read-write | current | To Clear System Configuration. Change the value from 0 to 1 to clear all the settings on the system. Also, known as Restore To Factory Defaults (RTFD). |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.19 | ScalarfwuLinkTestLastRuntime | read-only | current | Time indicating the most recent execution of System/Link Test. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.20 | ScalarfwuNTPServerIP | read-write | current | IP address of NTP Server. Use internet dot-decimal notation when providing the address. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.1.21 | ScalarfwuSyncNTPServer | read-write | current | Enable synchronization with NTP server. Change the value from 0 to 1 to enable synchronization with the NTP Server. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.2 | NodefwuHstExt | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.2.1 | ScalarfwuHstMajorContactAlarmOutput | read-only | current | Host Major contact output port state. Not present, OK and faulted are the supported states. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.2.2 | ScalarfwuHstMinorContactAlarmOutput | read-only | current | Host Minor contact output port state. Not present, OK and faulted are the supported states. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.2.3 | ScalarfwuRmtMajorContactAlarmOutput | read-only | current | Remote Major contact output port state. Not present, OK and faulted are the supported states. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.2.4 | ScalarfwuRmtMinorContactAlarmOutput | read-only | current | Remote Minor contact output port state. Not present, OK and faulted are the supported states. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3 | NodefwuSystemActiveAlarms | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1 | TablefwuSystemActiveAlarmTable | not-accessible | current | This table lists all the outstanding (active) alarms in the system. Alarms are removed from this table when the alarm condition is cleared (i.e. When CLEAR is … |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1 | RowfwuSystemActiveAlarmEntry | not-accessible | current | Entries for active alarms. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.1 | ColumnfwuSystemAlarmSequenceNumber | not-accessible | current | The number of the alarm table entry which is defined by this row. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.2 | ColumnfwuSystemAlarmTrapNodeAddress | read-only | current | System Node Address, where the alarm originated. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.3 | ColumnfwuSystemlabel | read-only | current | The name used to identify the system. Since the Host name is used to identify the system, the Host name is reflected here. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.4 | ColumnfwuSystemAlarmRmtName | read-only | current | Name of the unit from which the alarm originated. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.5 | ColumnfwuSystemAlarmRmtType | read-only | current | Type of the unit from which the alarm originated. fwuSystemAlarmRmtName is the user provided name of this unit. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.6 | ColumnfwuSystemAlarmModuleType | read-only | current | Type of the Module from which the alarm originated. e.g SeRF, DART, SFP. To be read with fwuSystemAlarmRmtType. Then, it identifies the module on that (fwuSyst… |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.7 | ColumnfwuSystemAlarmModuleNumber | read-only | current | Number of the module from which the alarm originated. To be used in conjuction with the object fwuSystemAlarmModuleType. So, if module type indicated DART and … |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.8 | ColumnfwuSystemAlarmModuleName | read-only | current | Name of the Module from which the alarm originated. The user provided name of the module identified by fwuSystemAlarmModuleNumber. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.9 | ColumnfwuSystemAlarmSeverity | read-only | current | Severity of the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.10 | ColumnfwuSystemAlarmRFBand | read-only | current | The RF band affected by this alarm condition. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.11 | ColumnfwuSystemAlarmTimeStamp | read-only | current | Time when the alarm is raised. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.12 | ColumnfwuSystemAlarmCode | read-only | current | A positive number which uniquely identifies an alarm. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.13 | ColumnfwuSystemAlarmHstNbr | read-only | current | Number identifying the host in the system. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.14 | ColumnfwuSystemAlarmAnalogAddress | read-only | current | Analog Portion of the node address. |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2 | NodefwuHstSystemLevelTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.2 | NotificationfwuHstModuleMissingFault | current | Missing Host pluggable module. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.3 | NotificationfwuHstOverTempFault | current | Host Temperature above operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.4 | NotificationfwuHstUnderTempFault | current | Host Temperature below operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.5 | NotificationfwuHstBTSUnderPowerFault | current | Band specific alarm FLM raised when unit connected to BTS. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.6 | NotificationfwuHstFLMDownconvertFailureFault | current | Forward Link Monitor (FLM) fault active. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.7 | NotificationfwuHstRLMUpconvertFailureFault | current | Band specific alarm RLM raised when unit connected to BTS. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.8 | NotificationfwuHstRLMUpConIndetFault | current | Unable to run RLM due to Host Reverse gain being set too low. | |
| 1.3.6.1.4.1.2014.15.2.1.1.1.2.9 | NotificationfwuHstIamAliveFault | current | The Host I am alive Trap | |
| 1.3.6.1.4.1.2014.15.2.1.1.2 | NodefwuHstSERFObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.2.1 | NodefwuHstSERFInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1 | NodefwuHstSERFGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.1 | ScalarfwuHstSERFLinuxKernelVer | read-only | current | Linux Kernel version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.2 | ScalarfwuHstSERFLinuxBootLoaderVer | read-only | current | Boot Loader1 version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.3 | ScalarfwuHstSERFCompactFlashSWVer | read-only | current | Compact Flash version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.4 | ScalarfwuHstSERFFPGAVer | read-only | current | FPGA version loaded on Host SeRF. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.5 | ScalarfwuHstSERFPPCSNMPAgentSWVer | read-only | current | SNMP agent version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.6 | ScalarfwuHstSERFPPCHWMonSWVer | read-only | current | Hardware Monitor process version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.7 | ScalarfwuHstSERFPPCAPPMonSWVer | read-only | current | Application Monitor process version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.8 | ScalarfwuHstSERFPPCMATEMonSWVer | read-only | current | Mate Monitor process version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.9 | ScalarfwuHstSERFPPCENETMonSWVer | read-only | current | Ethernet Monitor process version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.10 | ScalarfwuHstSERFPPCFPGAMonSWVer | read-only | current | FPGA Monitor process version on host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.11 | ScalarfwuHstSERFRIDateCode | read-only | current | Host SeRF Inventory - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.12 | ScalarfwuHstSERFRIHWVer | read-only | current | Host SeRF Inventory - Hardware version. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.13 | ScalarfwuHstSERFRISerialNumber | read-only | current | Host SeRF Inventory - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.14 | ScalarfwuHstSERFRIADCPartNumber | read-only | current | Host SeRF Inventory - TE PartNumber. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.15 | ScalarfwuHstSERFRIHWGen | read-only | current | Host SeRF Hardware Generation. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.16 | ScalarfwuHstSERFLinuxBootLoaderFirstVer | read-only | current | Boot Loader2 version of the host system. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.17 | ScalarfwuHstpThreadSWVer | read-only | current | The version number of pThread process. If blank then pThread does not run here. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.18 | ScalarfwuHstSubagentSWVer | read-only | current | The version number of the subagent. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.1.19 | ScalarfwuHstWebServerSWVer | read-only | current | The version number of web server. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2 | NodefwuHstSERFOptObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1 | TablefwuHstSERFOptTable | not-accessible | current | This table maintains Information of Host SERF Optical Objects. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1 | RowfwuHstSERFOptEntry | not-accessible | current | Each entry in this table refers to Host SERF Optical objects. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.1 | ColumnfwuHstSERFOptSFPNumber | read-only | current | SFP Number - Optical Port number. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.2 | ColumnfwuHstSERFOptSFPName | read-write | current | User defined name of each Host SFP. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Ma… |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.3 | ColumnfwuHstSERFOptSFPType | read-only | current | SFP Type - Optical Port Type. Identifies whether the SFP is short(1)/intermediate(2)/long(3) range. It may also be unidentified (-1). |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.4 | ColumnfwuHstSERFOptSFPTxColor | read-only | current | Wavelength of light used in the SFP (in nanometers). |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.5 | ColumnfwuHstSERFOptRevLaunchPowerMeas | read-only | current | Value of the optical power, in dBm received at the host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.6 | ColumnfwuHstSERFOptFwdLaunchPowerMeas | read-only | current | Value of the optical power, in dBm transmitted by the host. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.7 | ColumnfwuHstSERFOptMateName | read-only | current | Name of Host Mates. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.8 | ColumnfwuHstSERFIPEnable | read-only | current | Indicates whether IP is enabled(1) or not(2). |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.9 | ColumnfwuHstSERFOptMateId | read-only | current | Identifier of (companion) mate unit. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.10 | ColumnfwuHstSERFOptMateSfpId | read-only | current | SFP slot number used at remote end. |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2 | NodefwuHstSERFTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.2 | NotificationfwuHstSERFSynthAlarmFault | current | Host SeRF synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.3 | NotificationfwuHstSERFFault | current | Summary of SeRF Synthesizer Unlocked alarm and SeRF FPGA status. The system may not be communicating with the Ethernet Switch. This fault is also precipitated … | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.4 | NotificationfwuHstSERFRmtLostFault | current | Remote is not communicating with Host. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.5 | NotificationfwuHstSERFOptRxBERFault | current | High bit error rate (BER) detected by fiber optic receiver. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.6 | NotificationfwuHstSERFOptRxNoLightFault | current | No signal detected by optical receiver. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.7 | NotificationfwuHstSERFOptLaserFault | current | SFP optical transmitter failed. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.8 | NotificationfwuHstSERFOptOverDriveFault | current | SFP optical receive input power above specification. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.9 | NotificationfwuHstSERFOptUnderDriveFault | current | SFP optical receive input power below specification. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.10 | NotificationfwuHstSERFOptIpEnableFault | current | Host SFP IPEnable Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.11 | NotificationfwuMastClockPriorityLvlConflict | current | More than one Host has the same Master Clock Priority Level. All Hosts in conflict raise the alarm. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.12 | NotificationfwuHstI2CBus1Fault | current | Indicates an I2C communication problem. | |
| 1.3.6.1.4.1.2014.15.2.1.1.2.2.13 | NotificationfwuHstI2CBus2Fault | current | Indicates an I2C communication problem. | |
| 1.3.6.1.4.1.2014.15.2.1.1.3 | NodefwuHstSERFEthPortObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.3.1 | NodefwuHstSERFEthPortInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1 | TablefwuHstSERFEthPortTable | not-accessible | current | This table maintains information of Host Ethernet Ports. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1 | RowfwuHstSERFEthPortEntry | not-accessible | current | Each entry in this table refers to Host SERF Ethernet port objects. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.1 | ColumnfwuHstSERFEthPortNumber | read-only | current | A unique identifier for each Ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.2 | ColumnfwuHstSERFEthPortType | read-only | current | An identifier for the type of Ethernet port. The port types are network(1), craft(2) , management(3) , switch(4) , SFP(5). It may be unknown (-1). |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.3 | ColumnfwuHstSERFEthPortRxBytes | read-only | current | Count of the number of recieved bytes at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.4 | ColumnfwuHstSERFEthPortRxPkts | read-only | current | The number of packets recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.5 | ColumnfwuHstSERFEthPortRxFcsErrors | read-only | current | The number of FCS errors recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.6 | ColumnfwuHstSERFEthPortRxBroadcastPkts | read-only | current | The number of broadcast packets recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.7 | ColumnfwuHstSERFEthPortRxMulticastPkts | read-only | current | The number of multicast packets at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.8 | ColumnfwuHstSERFEthPortRxFragmtdFrames | read-only | current | The number of fragmented frames received at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.9 | ColumnfwuHstSERFEthPortRxJabbersFrames | read-only | current | The number of jabber frames received at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.10 | ColumnfwuHstSERFEthPortTxByteCounter | read-only | current | The number of bytes transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.11 | ColumnfwuHstSERFEthPortTxPkts | read-only | current | The number of packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.12 | ColumnfwuHstSERFEthPortTxBroadcastPkts | read-only | current | The number of broadcast packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.13 | ColumnfwuHstSERFEthPortTxMulticastPkts | read-only | current | The number of multicast packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.14 | ColumnfwuHstSERFEthPortSFPId | read-only | current | Identifies the SFP number to which this ethernet port connects. |
| 1.3.6.1.4.1.2014.15.2.1.1.3.2 | NodefwuHstSERFEthPortTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.4 | NodefwuHstSERFFPGAObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.4.1 | NodefwuHstSERFFPGAInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.4.1.1 | ScalarfwuHstSERFFPGAStatus | read-only | current | Provides the SERF Card FPGA status. The status may be PPC can communicate with the FPGA (0) or not (1). |
| 1.3.6.1.4.1.2014.15.2.1.1.4.2 | NodefwuHstSERFFPGATraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.5 | NodefwuHstMateMonObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.5.1 | NodefwuHstMateMonInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.5.1.1 | TablefwuHstMateMonTable | not-accessible | current | This table maintains Information of Host Mate Monitor. |
| 1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1 | RowfwuHstMateMonEntry | not-accessible | current | Each entry in this table refers to host Mate monitor objects. |
| 1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1.1 | ColumnfwuHMmonRmtID | read-only | current | ID of companion remote unit as Index of mate monitor table. |
| 1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1.2 | ColumnfwuHMmonRmtIPAddress | read-only | current | IP addresses of remote mate. This is a link-local address. |
| 1.3.6.1.4.1.2014.15.2.1.1.6 | NodefwuHstDARTObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.6.1 | NodefwuHstDARTInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1 | NodefwuHstDARTGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1 | TablefwuHstDARTGeneralTable | not-accessible | current | This table maintains Information of Host DART Card. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1 | RowfwuHstDARTGeneralEntry | not-accessible | current | Each entry in this table refers to host DART Card objects. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.1 | ColumnfwuHstDARTNumber | read-only | current | A unique identifier for each DART. As there are eight DART slots, the number may be any of 1 to 8. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.2 | ColumnfwuHstDARTName | read-create | current | A user defined name for each DART Card object of host. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name… |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.3 | ColumnfwuHstDARTBandType | read-only | current | Band type of host DART card. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.4 | ColumnfwuHstDARTPassBand | read-create | current | This is for configuration of Pass-band type for host DART card. Following input formats are supported for Classic and SuperDart passband configuration. 1. For … |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.5 | ColumnfwuHstDARTOperatingMode | read-create | current | Operating mode of the Host DART. The DART may be operating normally (1) or on standby (2). The mode may be undefined (-1). |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.6 | ColumnfwuHstDARTDiversityStatus | read-create | current | Diversity Status of host DART. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.7 | ColumnfwuHstDARTForwardGain | read-create | current | Primary Gain in the forward path of Host DART. The range is 0-31dB with increments in steps of 1dB. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.8 | ColumnfwuHstDARTReverseGain | read-create | current | Primary Gain in the reverse path of Host DART. The range is 0-31dB with increments in steps of 1dB. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.9 | ColumnfwuHstDARTFPGAStatus | read-only | current | Host DART FPGA Status. It indicates whether the SeRF FPGA can talk to DART FPGA(0) or not (1). |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.10 | ColumnfwuHstDARTFPGAProgramVer | read-only | current | FPGA Version on the Host DART card. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.11 | ColumnfwuHstDARTRIADCPartNumber | read-only | current | Host DART Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.12 | ColumnfwuHstDARTRISerialNumber | read-only | current | Host DART Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.13 | ColumnfwuHstDARTRIDateCode | read-only | current | Host DART Inventory Data - DateCode. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.14 | ColumnfwuHstDARTRIHWVer | read-only | current | Host DART Inventory Data - HW version. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.15 | ColumnfwuHstDARTRowStatus | read-create | current | The status of this conceptual row. It may be active or inactive. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.16 | ColumnfwuHstDARTPeakInputPwrLvl1 | read-only | current | Peak Input Power Level 1 to a Host DART. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17 | ColumnfwuHstDARTPeakInputPwrLvl2 | read-only | current | Peak Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.18 | ColumnfwuHstDARTPeakAvgInputPwrLvl1 | read-only | current | Peak Average Input Power Level1 to a Host DART. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.19 | ColumnfwuHstDARTPeakAvgInputPwrLvl2 | read-only | current | Peak Average Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.20 | ColumnfwuHstDARTMinAvgInputPwrLvl1 | read-only | current | Minimum Average Input Power Level 1 to a Host DART. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.21 | ColumnfwuHstDARTMinAvgInputPwrLvl2 | read-only | current | Minimum Average Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.22 | ColumnfwuHstDARTInputPowerMode | read-write | current | Host DART Input Power Level Mode. The supported modes are Snapshot(0) and Max Hold(1). When setting Max Hold, ensure that the status (fwuHstDARTDiversityStatus… |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.23 | ColumnfwuHstDARTPwrLevelMaxHoldReset | read-write | current | Provision to reset the Max Hold reading. Used when the input power mode is Max hold. Reset by changing from normal (0) to reset (1). Status will revert to norm… |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.24 | ColumnfwuHstDARTLastMaxHoldResetTime | read-only | current | Date and Time of the last Max Hold reset on the host DART. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.25 | ColumnfwuHstDARTInputSrc | read-write | current | To identify the input source; BTS(1) or BDA(2) and change it, if required. |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2 | NodefwuHstDARTTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.2 | NotificationfwuHstDARTDwnCon1SynLockFault | current | DART downconverter 1 synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.3 | NotificationfwuHstDARTDwnCon2SynLockFault | current | DART downconverter 2 synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.4 | NotificationfwuHstDARTUpConSynLockFault | current | DART upconverter synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.5 | NotificationfwuHstDARTOverDriveFault | current | DART forward RF input too high. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.6 | NotificationfwuHstDARTUnderDriveFault | current | DART forward RF input signal below the normal operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.7 | NotificationfwuHstDARTFault | current | Summary of DART Downconverter 1 Synthesizer Unlocked, Downconverter 2 Synthesizer Unlocked, Upconverter Synthesizer Unlocked, DC Supply Fault alarms, and DART … | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.8 | NotificationfwuHstDARTDCSupplyFault | current | DART card DC supply voltages outside specification. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.9 | NotificationfwuHstDARTHardwareMismatchFault | current | Host DART does not support the selected passband. Fault occurs when a Host DART is replaced with another DART of the incorrect type. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.10 | NotificationfwuHstDARTALCLimitingFault | current | Host DART forward path Automatic Level Control is active. | |
| 1.3.6.1.4.1.2014.15.2.1.1.6.2.11 | NotificationfwuHstDARTLinkingConflictFault | current | Host comes back up and finds that it cannot restore a link with a remote DART to which it was linked. | |
| 1.3.6.1.4.1.2014.15.2.1.1.7 | NodefwuHstSystemCardObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.1.7.1 | NodefwuHstSystemCardInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.1 | ScalarfwuHstSysCardRIADCPartNumber | read-only | current | Host Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.2 | ScalarfwuHstSysCardRISerialNumber | read-only | current | Host Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.3 | ScalarfwuHstSysCardRIDateCode | read-only | current | Host Inventory Data - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.4 | ScalarfwuHstSysCardRIHWVer | read-only | current | Host Inventory Data - Hardware version. |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.5 | ScalarfwuHstSysCard10MhzRefClock | read-write | current | System Card Reference clock. It may be set to internal (0) or external(1). |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.6 | ScalarfwuHstSysCardCPLevel | read-write | current | System Card Master Clock Priority Level prioritizes the system card clock using values 1 through 14 (Lower value is higher priority). This is primarily used in… |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.7 | ScalarfwuHstSysCardOutputRefClock | read-write | current | System Card Reference clock. System Board I supports only 10 MHz and System Board II supports both 10 MHz and 30 MHz Clock output. Default value is 1 for Host … |
| 1.3.6.1.4.1.2014.15.2.1.1.7.1.8 | ScalarfwuHstSysCardRIHWGen | read-only | current | Host System Card Hardware Generation. Presently, there are two generations; first Generation(0), second Generation(1) |
| 1.3.6.1.4.1.2014.15.2.1.1.7.2 | NodefwuHstSystemCardTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.1.7.2.2 | NotificationfwuHstSysCardFanFault | current | Fan not functioning. | |
| 1.3.6.1.4.1.2014.15.2.1.1.7.2.3 | NotificationfwuHstSysCardClockMismatchFault | current | System Card output clock not supported. | |
| 1.3.6.1.4.1.2014.15.2.1.2 | NodefwuRemoteUnitObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.1 | NodefwuRmtSystemLevelObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.1.1 | NodefwuRmtSystemLevelInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1 | NodefwuRmtGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1 | TablefwuRmtGeneralTable | not-accessible | current | This table maintains Information of remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1 | RowfwuRmtGeneralEntry | not-accessible | current | Each entry in this table refers to remote objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.1 | ColumnfwuRmtNumber | read-only | current | The Node address of connected remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.2 | ColumnfwuRmtCatalogState | read-only | current | Catalog state of remote. If fwuRmtCatalogState is commission(2), then start commissioning on remote, else if it in normal, do not commission the remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.3 | ColumnfwuRmtName | read-create | current | User defined name of the remote unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. … |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.4 | ColumnfwuRmtAlarmStatusSummary | read-only | current | Summary of alarm status of all connected remote units. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.5 | ColumnfwuRmtTempMeasurement | read-only | current | Temperature of each remote unit in Celsius. This value comes from the RSI. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.6 | ColumnfwuRmtGeneralTableRowStatus | read-create | current | The status of this conceptual row. It may be active or inactive. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.7 | ColumnfwuRmtType | read-only | current | The type of Remote. e.g. Prism, DRU, HEU, IRU. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.8 | ColumnfwuDruIfCombinerReboot | read-write | current | Reboot an IF-combiner and all the units connected to it. Only applicable to DRU-IFs Change Value from 0 to 1 to reboot. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.9 | ColumnfwuUsrCommLinkTestIFBr | read-write | current | Provision to perform system test on an IF branch. Change from inactive(0) to start(1) to initiate the test. For the duration of the test inprogress(2) is displ… |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.10 | ColumnfwuUsrCommLinkTestIFBrDType | read-write | current | Selected Bands i.e. RF DARTs on units when performing system test. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.11 | ColumnfwuUsrCommLinkTestDartId | read-write | current | To identify the DART . |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.12 | ColumnfwuDruBackPlaneRev | read-only | current | Provides the back plane revision of the DRU (Three pin version Number of the Chassis back plane) |
| 1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.13 | ColumnfwuPrismUnitReset | read-write | current | Provides a way to reset the Remote SERF card. SET this to reset(1) to trigger a remote unit reset. |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2 | NodefwuRmtSystemLevelTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.2 | NotificationfwuRmtAcPowerSupplyFault | current | Summary of AC Power Supply 1, AC Power Supply 2, AC Power Supply 3, and AC Power Supply 4 alarms. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.3 | NotificationfwuRmtMajorExtAlarmInputFault | current | The remote Major Ext Alarm Input Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.4 | NotificationfwuRmtMinorExtAlarmInputFault | current | The remote Minor Ext Alarm Input Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.5 | NotificationfwuRmtModuleMissingFault | current | A Remote (DRU/PRU/URU) pluggable module is missing (if DRU: DART or SFP. If PRU/URU: DART, SFP, LNA, LPA, or PD). | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.6 | NotificationfwuRmtOverTempFault | current | Remote Temperature above operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.7 | NotificationfwuRmtUnderTempFault | current | Temperature below operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.8 | NotificationfwuRmtOpenDoorFault | current | Door open on PRU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.9 | NotificationfwuRmtFanOverSpeedFault | current | Fans operating above expected RPM. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.10 | NotificationfwuRmtFanUnderSpeedFault | current | Fans operating below expected RPM. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.11 | NotificationfwuRmtDownLinkCalToneFailureFault | current | Forward calibration tone not at expected level. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.12 | NotificationfwuRmtUplinkFailureDetectLowFault | current | Reverse test tone not at expected level. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.13 | NotificationfwuRmtUpConvertFailureFault | current | Band specific alarm raised during Forward Link Monitoring on PRU/URU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.14 | NotificationfwuRmtUnderPowerFault | current | Band specific alarm raised during Forward Link Monitoring on PRU/URU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.15 | NotificationfwuRmtDownConvertFailureFault | current | Band specific alarm raised during Reverse Link Monitoring on PRU/URU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.16 | NotificationfwuRmtUpconIndetFault | current | Band specific alarm raised during Forward Link Monitoring on PRU/URU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.17 | NotificationfwuRmtFiberConnMismatchFault | current | Fiber optic cable connections between cascaded DRU/PRUs not following SFP connection rules. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.18 | NotificationfwuRmtExcessConnFault | current | Two or more DRU/PRU/URU connected to a single cascaded DRU/PRU/URU, or a ninth DRU/PRU/URU connected in cascade. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.19 | NotificationfwuRmtInvalidDevConnFault | current | PRU/URU connected to a DRU or vice versa. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.20 | NotificationfwuDruSysCardClockMismatchFault | current | System Card output clock not supported. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.21 | NotificationfwuDruNoCommsFault | current | DRU has lost communication with IFEU Or IFEU is disconnected from the DRU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.22 | NotificationfwuSWVersionMismatchFault | current | Software Version Mismatch Fault. SW Versions on the Host and Remote do not match. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.23 | NotificationfwuDruSysCardFanFault | current | Fan not functioning. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.24 | NotificationfwuDruOverTempFault | current | DRU Temperature above operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.1.2.25 | NotificationfwuDruUnderTempFault | current | DRU Temperature below operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2 | NodefwuRmtSERFObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.2.1 | NodefwuRmtSERFInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1 | NodefwuRmtSERFGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1 | TablefwuRmtSERFGeneralTable | not-accessible | current | This table maintains Information of remote SERF Card. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1 | RowfwuRmtSERFGeneralEntry | not-accessible | current | Each entry in this table refers to SERF Card objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.1 | ColumnfwuRmtSERFLinuxKernelVer | read-only | current | Linux Kernel version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.2 | ColumnfwuRmtSERFLinuxBootLoaderVer | read-only | current | Linux Boot loader version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.3 | ColumnfwuRmtSERFCompactFlashSWVer | read-only | current | Compact Flash version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.4 | ColumnfwuRmtSERFFPGAVer | read-only | current | Version of FPGA loaded on remote SeRF. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.5 | ColumnfwuRmtSERFPPCHWMonSWVer | read-only | current | Hardware monitor process version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.6 | ColumnfwuRmtSERFPPCAPPMonSWVer | read-only | current | Application monitor process version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.9 | ColumnfwuRmtSERFPPCMATEMonSWVer | read-only | current | Mate monitor process version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.10 | ColumnfwuRmtSERFPPCENETMonSWVer | read-only | current | ENET monitor process version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.11 | ColumnfwuRmtSERFPPCFPGAMonSWVer | read-only | current | FPGA monitor process version on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.12 | ColumnfwuRmtSERFRIDateCode | read-only | current | Remote SERF Inventory - Date Code of the Remote system. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.13 | ColumnfwuRmtSERFRIHWVer | read-only | current | Remote SERF Inventory - HardWare version of the remote system. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.14 | ColumnfwuRmtSERFRISerialNumber | read-only | current | Remote SERF Inventory - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.15 | ColumnfwuRmtSERFRIADCPartNumber | read-only | current | Remote SERF Inventory - TE PartNumber. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.16 | ColumnfwuRmtSERFRIHWGen | read-only | current | Remote SERF Hardware Generation. Presently, there are two generations first generation(0), second generation(1) |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.17 | ColumnfwuRmtpThreadSWVer | read-only | current | The version number of pThread Process. If blank then pThread is not running. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.18 | ColumnfwuRmtWebServerSWVer | read-only | current | The version number of Web Server on remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2 | NodefwuRmtSERFOptObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1 | TablefwuRmtSERFOptTable | not-accessible | current | This table maintains Information of remote units SFP objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1 | RowfwuRmtSERFOptEntry | not-accessible | current | Each entry in this table refers to remote units SFP objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.1 | ColumnfwuRmtSERFOptSFPNumber | read-only | current | A unique identifier of each SFP. The identifier is the SFP slot number. There are eight slots. Therefore, the valid values are 1 to 8. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.2 | ColumnfwuRmtSERFOptSFPName | read-write | current | User defined name of each Remote SFP. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. … |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.3 | ColumnfwuRmtSERFOptSFPType | read-only | current | SFP Type - Optical Port Type. Identifies whether the SFP is short(1)/intermediate(2)/long(3) range. It may also be unidentified (-1). |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.4 | ColumnfwuRmtSERFOptSFPColor | read-only | current | Wavelength of light used in the SFP (in nanometers). |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.5 | ColumnfwuRmtSERFOptRevLaunchPowerMeas | read-only | current | Value of the optical power, in dBm received at the remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.6 | ColumnfwuRmtSERFOptFwdLaunchPowerMeas | read-only | current | Value of the optical power, in dBm transmitted by the remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.7 | ColumnfwuRmtSERFOptMateName | read-only | current | Name of Remote mate. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.8 | ColumnfwuRmtSERFIPEnable | read-only | current | IP enable mode. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.9 | ColumnfwuRmtSERFOptMateId | read-only | current | Identifier of (companion) mate unit. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.10 | ColumnfwuRmtSERFOptMateSfpId | read-only | current | Identifier of SFP to which the mate connects. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.11 | ColumnfwuRmtSERFOptMateSfpDir | read-only | current | Indicates whether the fiber is incoming(from the direction of the host) (0) or outgoing (away from the unit)(1) on this SFP port. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.12 | ColumnfwuRmtSERFOptHostIP | read-only | current | IP addresses of Host. If 'NA', then it means that no host is connected. |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2 | NodefwuRmtSERFTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.2 | NotificationfwuRmtSERFHstLostFault | current | Host not communicating with DRU/PRU/URU. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.3 | NotificationfwuRmtSERFOptRxBERFault | current | High bit error rate (BER) detected by fiber optic receiver. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.4 | NotificationfwuRmtSERFOptRxNoLightFault | current | No signal detected by optical receiver. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.5 | NotificationfwuRmtSERFOptLaserFault | current | SFP optical transmitter failed. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.6 | NotificationfwuRmtSERFOptOverDriveFault | current | SFP optical receive input power above specification. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.7 | NotificationfwuRmtSERFOptUnderDriveFault | current | SFP optical receive input power below specification. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.8 | NotificationfwuRmtSERFSynthAlarmFault | current | SeRF synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.9 | NotificationfwuRmtSERFFault | current | Summary of SeRF Synthesizer Unlocked alarm and SeRF FPGA status. Possibly, the system may not be communicating with the Ethernet Switch. This is also precipita… | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.10 | NotificationfwuRmtI2CBus1Fault | current | Indicates an I2C communication problem. | |
| 1.3.6.1.4.1.2014.15.2.1.2.2.2.11 | NotificationfwuRmtI2CBus2Fault | current | Indicates an I2C communication problem. | |
| 1.3.6.1.4.1.2014.15.2.1.2.3 | NodefwuRmtSERFEthPortObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.3.1 | NodefwuRmtSERFEthPortInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1 | TablefwuRmtSERFEthPortTable | not-accessible | current | This table maintains information of Host Ethernet Ports. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1 | RowfwuRmtSERFEthPortEntry | not-accessible | current | Each entry in this table refers to Host SERF Ethernet port objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.1 | ColumnfwuRmtSERFEthPortNumber | read-only | current | A unique identifier for each Ethernet port. There are twelve ports. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.2 | ColumnfwuRmtSERFEthPortType | read-only | current | An identifier for the type of Ethernet port. The port types are network(1), craft(2) , management(3) , switch(4) , SFP(5). It may be unknown (-1). |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.3 | ColumnfwuRmtSERFEthPortRxBytes | read-only | current | The number of bytes recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.4 | ColumnfwuRmtSERFEthPortRxPkts | read-only | current | The number of packets recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.5 | ColumnfwuRmtSERFEthPortRxFcsErrors | read-only | current | The number of FCS errors recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.6 | ColumnfwuRmtSERFEthPortRxBroadcastPkts | read-only | current | The number of broadcast packets recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.7 | ColumnfwuRmtSERFEthPortRxMulticastPkts | read-only | current | The number of multicast packets recieved at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.8 | ColumnfwuRmtSERFEthPortRxFragmtdFrames | read-only | current | The number of fragmented frames received at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.9 | ColumnfwuRmtSERFEthPortRxJabbersFrames | read-only | current | The number of jabber frames received at this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.10 | ColumnfwuRmtSERFEthPortTxByteCounter | read-only | current | The number of bytes transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.11 | ColumnfwuRmtSERFEthPortTxPkts | read-only | current | The number of packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.12 | ColumnfwuRmtSERFEthPortTxBroadcastPkts | read-only | current | The number of broadcast packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.13 | ColumnfwuRmtSERFEthPortTxMulticastPkts | read-only | current | The number of multicast packets transmitted from this ethernet port. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.14 | ColumnfwuRmtSERFEthPortSFPId | read-only | current | Identifier of SFP to which this ethernet port connects to. |
| 1.3.6.1.4.1.2014.15.2.1.2.3.2 | NodefwuRmtSERFEthPortTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.4 | NodefwuRmtSERFFPGAObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.4.1 | NodefwuRmtSERFFPGAInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.4.1.1 | TablefwuRmtSERFFPGAInfoTable | not-accessible | current | This table maintains Information of remote SERF FPGA objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.4.1.1.1 | RowfwuRmtSERFFPGAInfoEntry | not-accessible | current | Each entry in this table refers to SERF FPGA information. |
| 1.3.6.1.4.1.2014.15.2.1.2.4.1.1.1.1 | ColumnfwuRmtSERFFPGAStatus | read-only | current | Remote SERF Card FPGA status. Either the ppc can talk to FPGA(0) or not(1) |
| 1.3.6.1.4.1.2014.15.2.1.2.4.2 | NodefwuRmtSERFFPGATraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.6 | NodefwuRmtDARTObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.6.1 | NodefwuRmtDARTInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1 | NodefwuRmtDARTGeneral | |||
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1 | TablefwuRmtDARTGeneralTable | not-accessible | current | This table maintains Information of Remote DART Card. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1 | RowfwuRmtDARTGeneralEntry | not-accessible | current | Each entry in this table refers to remote DART Card objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.1 | ColumnfwuRmtDARTNumber | read-only | current | A unique identifier for each DART Card Object of remote. Since there are eight DART slots the valid values are 1 to 8. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.2 | ColumnfwuRmtDARTName | read-create | current | A user defined name for each DART Card object of remote. All characters except angular brackets, single and double quotes are allowed. Minimum length of the na… |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.3 | ColumnfwuRmtDARTBandType | read-only | current | Band type of remote DART card. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.4 | ColumnfwuRmtDARTPassBand | read-create | current | This is for configuration of Pass-band type for Remote DART card. Following input formats are supported for Classic and SuperDart passband configuration. 1. Fo… |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.5 | ColumnfwuRmtDARTOperatingMode | read-create | current | Operating mode of remote DART card. The DART may be operating normally (1) or on standby (2). The mode may be undefined (-1). |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.6 | ColumnfwuRmtDARTDiversityStatus | read-create | current | Diversity Status of remote DART card. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.7 | ColumnfwuRmtDARTForwardGain | read-create | current | Primary Gain in forward path of remote DART card. The range is 0-31dB with increments in steps of 1dB. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.8 | ColumnfwuRmtDARTReverseGain | read-only | current | Primary Gain in reverse path of remote DART card. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.9 | ColumnfwuRmtDARTForwardDelay | read-create | current | Forward delay in micro seconds on the remote DART. If the delay setting is outside the valid range of delay values then ranging fault will be raised if the Rem… |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.10 | ColumnfwuRmtDARTReverseDelay | read-create | current | Reverse delay in micro seconds on the remote DART. If the delay setting is outside the valid range of delay values then ranging fault will be raised if the Rem… |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.11 | ColumnfwuRmtDARTTempMeas | read-only | current | Temperature of Remote DART in degree Celsius. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.12 | ColumnfwuRmtDARTFPGAStatus | read-only | current | Remote DART FPGA Status. It indicates if the SERF FPGA can talk(0) or not talk(1)to DART FPGA . |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.13 | ColumnfwuRmtDARTFPGAProgramVer | read-only | current | FPGA version on the remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.14 | ColumnfwuRmtDARTRIADCPartNumber | read-only | current | Remote DART Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.15 | ColumnfwuRmtDARTRISerialNumber | read-only | current | Remote DART Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.16 | ColumnfwuRmtDARTRIDateCode | read-only | current | Remote DART Inventory Data - DateCode. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.17 | ColumnfwuRmtDARTRIHWVer | read-only | current | Remote DART Inventory Data - HW version. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.18 | ColumnfwuRmtDARTGeneralTableRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.19 | ColumnfwuRmtDARTActualForwardDelay | read-only | current | This is the forward delay on Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.20 | ColumnfwuRmtDARTForwardLowerboundDelay | read-only | current | This is the lower bound of the Forward Delay values. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.21 | ColumnfwuRmtDARTForwardUpperboundDelay | read-only | current | This is the upper bound of the Forward Delay values. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.22 | ColumnfwuRmtDARTActualReverseDelay | read-only | current | This is the Reverse delay on Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.23 | ColumnfwuRmtDARTReverseLowerboundDelay | read-only | current | This is the lower bound of the Reverse delay values. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.24 | ColumnfwuRmtDARTReverseUpperboundDelay | read-only | current | This is the upper bound of the Reverse delay values. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.25 | ColumnfwuRmtDARTPeakInputPwrLvl1 | read-only | current | Peak Input Power Level 1 to a Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.26 | ColumnfwuRmtDARTPeakInputPwrLvl2 | read-only | current | Peak Input Power Level 2 to the Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.27 | ColumnfwuRmtDARTPeakAvgInputPwrLvl1 | read-only | current | Peak Average Input Power Level 1 to the Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.28 | ColumnfwuRmtDARTPeakAvgInputPwrLvl2 | read-only | current | Peak Average Input Power Level 2 to the Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.29 | ColumnfwuRmtDARTMinAvgInputPwrLvl1 | read-only | current | Minimum Average Input Power Level 1 to the Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.30 | ColumnfwuRmtDARTMinAvgInputPwrLvl2 | read-only | current | Minimum Average Input Power Level 2 to the Remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.31 | ColumnfwuRmtDARTInputPowerMode | read-write | current | Remote DART Input Power Level Mode. Two modes are supported Snapshot(0) and Max Hold(1). |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32 | ColumnfwuRmtDARTPwrLevelMaxHoldReset | read-write | current | Provision to reset the Max Hold reading. Used when the input power mode is Max hold. Reset by changing from normal (0) to reset (1). Status will revert to norm… |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.33 | ColumnfwuRmtDARTLastMaxHoldResetTime | read-only | current | Date and Time of the last maxHold reset on the remote DART. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.34 | ColumnfwuRmtDARTReverseGainMode | read-write | current | The gain modes on the Reverse Path. Two modes are supported, Normal(0) and High(1). It is applicable to all RF modules but not to IF DARTs. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.35 | ColumnfwuRmtDARTTxRIADCPartNumber | read-only | current | Remote Inventory Data - TE Part Number [Tx Board]. Field will have value only if Tx Board is present. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.36 | ColumnfwuRmtDARTTxRISerialNumber | read-only | current | Remote Inventory Data - Serial Number [Tx Board]. Field will have value only if Tx Board is present. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.37 | ColumnfwuRmtDARTTxRIDateCode | read-only | current | Remote Inventory Data - DateCode [Tx Board]. Field will have value only if Tx Board is present. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.38 | ColumnfwuRmtDARTTxRIHWVer | read-only | current | Remote Inventory Data - HW version [Tx Board]. Field will have value only if Tx Board is present. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.39 | ColumnfwuRmtDARTLinkedStatus | read-only | current | Indicates if the DART is linked (1) or not (0). |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.40 | ColumnfwuRmtDARTAvailable | read-only | current | Indicates if the DART is available for use (1) or not (0). |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41 | ColumnfwuRmtDARTUsedSFP | read-only | current | Indicates the SFP (number) used by a DART to link. There are eight possible SFP numbers. Therefore, the valid values are 1 to 8. |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2 | NodefwuRmtDARTTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.2 | NotificationfwuRmtDARTDwnCon1SynLockFault | current | Lock state of the first down converter synthesizer. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.3 | NotificationfwuRmtDARTDwnCon2SynLockFault | current | DART downconverter 2 synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.4 | NotificationfwuRmtDARTUpConSynLockFault | current | DART downconverter 2 synthesizer unlocked. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.5 | NotificationfwuRmtDARTDCSupplyFault | current | DART card DC supply voltages outside specification. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.6 | NotificationfwuRmtDARTFault | current | Summary of DART Downconverter 1 Synthesizer Unlocked, Downconverter 2 Synthesizer Unlocked, Upconverter Synthesizer Unlocked, DC Supply Fault alarms, and DART … | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.7 | NotificationfwuRmtDARTHardwareMismatchFault | current | Remote DART does not support the selected passband. Fault occurs when a Remote DART is replaced with another DART of the incorrect type. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.8 | NotificationfwuRmtRangingFault | current | DRU/PRU/URU delay settings outside the valid range. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.9 | NotificationfwuRmtDARTOverTempFault | current | Remote DART temperature above operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.10 | NotificationfwuRmtDARTLowTempFault | current | Remote DART temperature below operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.11 | NotificationfwuRmtDARTUplinkInactivityFault | current | No uplink activity is detected for one hour. | |
| 1.3.6.1.4.1.2014.15.2.1.2.6.2.12 | NotificationfwuRmtDARTCommsFault | current | The Remote DART communication path is missing or incorrect. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8 | NodefwuRmtLPAObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.8.1 | NodefwuRmtLPAInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1 | TablefwuRmtLPAInfoTable | not-accessible | current | This table maintains Information of remote LPA objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1 | RowfwuRmtLPAInfoEntry | not-accessible | current | Each entry in this table refers to LPA objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.1 | ColumnfwuRmtLPANumber | read-only | current | A unique identifier for an LPA. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.2 | ColumnfwuRmtLPAReset | read-write | current | Provision to reset the LPA. Change from normal(0) to reset(1) to perform a reset of the LPA. Resetting the LPA when it is offline will place in an operating st… |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.3 | ColumnfwuRmtLPAOpState | read-only | current | Identifies the LPA Operating mode. The modes are operating (0) and offline (1). The operating state is controlled by fwuRmtLPAControl. Also, see fwuRmtLPAReset. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.4 | ColumnfwuRmtLPAPartNum | read-only | current | Remote LPA Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.5 | ColumnfwuRmtLPASerialNum | read-only | current | Remote LPA Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.6 | ColumnfwuRmtLPAHWVer | read-only | current | Remote LPA Hardware version. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.7 | ColumnfwuRmtLPASWVer | read-only | current | Remote LPA Software version. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.8 | ColumnfwuRmtLPADescr | read-only | current | Remote LPA Description. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.9 | ColumnfwuRmtLPAControl | read-write | current | Provision to control the operating mode of remote LPA. When the control is set to normal (0), the operating mode is operating. When the control is set to offli… |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.10 | ColumnfwuRmtLPAMaxOpPwr | read-only | current | Maximum Output power for the LPA. This object is applicable for HDMs also. |
| 1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.11 | ColumnfwuRmtLPABandType | read-only | current | LPA hardware type. Valid LPA Types are cellularA(1), cellularB(2), smrLow(3), smrHigh(4), pcs(5), aws(6), smrLowWide(7), fullCellular(8), gsm1800(9), umts(10),… |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2 | NodefwuRmtLPATraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.2 | NotificationfwuRmtLPADisableFault | current | PRU/URU Linear Power Amplifier (LPA) disabled due to an internally detected problem. (VSWR, DC, Loop Fault, Low Power, or Temperature High alarm). | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.3 | NotificationfwuRmtLPAOverPowerFault | current | PRU/URU Linear Power Amplifier (LPA) output power level above operating limit. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.4 | NotificationfwuRmtLPAHighTempFault | current | LPA High Temperature Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.5 | NotificationfwuRmtLPAVswrFault | current | PRU/URU Linear Power Amplifier (LPA) VSWR fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.6 | NotificationfwuRmtLPADcFault | current | PRU/URU Linear Power Amplifier (LPA) DC fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.7 | NotificationfwuRmtLPALoopFault | current | PRU/URU Linear Power Amplifier (LPA) Loop fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.8 | NotificationfwuRmtLPALowPowerFault | current | Internal low power fault state of linear power amplifier (the gain of one or more internal amplifiers does not meet specification). | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.9 | NotificationfwuRmtLPADetectFault | current | Linear Power Amplifier (LPA) detection fault. LPA missing from remote. | |
| 1.3.6.1.4.1.2014.15.2.1.2.8.2.10 | NotificationfwuRmtPaOverCurrentFault | current | PA reported fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.9 | NodefwuRmtPwrDetectorBoardObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.9.1 | NodefwuRmtPwrDetectorBoardInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1 | TablefwuRmtPwrDetectorBoardInfoTable | not-accessible | current | This table maintains Information of remote power detector board objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1 | RowfwuRmtPwrDetectorBoardInfoEntry | not-accessible | current | Each entry in this table refers to power detector board objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.1 | ColumnfwuRmtPowerDetectorNumber | read-only | current | A unique identifier for each power detector. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.2 | ColumnfwuRmtSystemVswrMeas | read-only | current | VSWR (Voltage Standing Wave Ratio) measured in the system. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.3 | ColumnfwuRmtRFPowerOutputMeas | read-only | current | The value of Remote RF Power Output, in dBm. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.4 | ColumnfwuRmtPwrDetectorBoardRIADCPartNum | read-only | current | Power Detector Inventory - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.5 | ColumnfwuRmtPwrDetectorBoardRISerialNum | read-only | current | Power Detector Inventory - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.6 | ColumnfwuRmtPwrDetectorBoardRIDateCode | read-only | current | Power Detector Inventory - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.7 | ColumnfwuRmtPwrDetectorBoardRIHWVer | read-only | current | Power Detector Inventory - HW version. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.8 | ColumnfwuRmtPwrDetectorNoRfPowerThershold | read-write | current | Threshold value for RF No Power. The minimum threshold value is 0dBm and maximum threshold value is 100dBm. |
| 1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.9 | ColumnfwuRmtSystemVSWRThreshold | read-write | current | User set VSWR threshold value. User is to provide the VSWR value in the form x.y:1. If the value is provided as x:1 then it will be represented as x.0:1. The m… |
| 1.3.6.1.4.1.2014.15.2.1.2.9.2 | NodefwuRmtPwrDetectorBoardTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.9.2.2 | NotificationfwuRmtSystemVswrFault | current | PRU/URU VSWR measurement above specification. | |
| 1.3.6.1.4.1.2014.15.2.1.2.9.2.3 | NotificationfwuRmtRFPowerFault | current | PRU/URU RF Output Power below minimum threshold. | |
| 1.3.6.1.4.1.2014.15.2.1.2.10 | NodefwuRmtLNAObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.10.1 | NodefwuRmtLNAInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1 | TablefwuRmtLNAInfoTable | not-accessible | current | This table maintains Information of remote LNA objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1 | RowfwuRmtLNAInfoEntry | not-accessible | current | Each entry in this table refers to LNA information. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.1 | ColumnfwuRmtLNANumber | read-only | current | A unique identifier for LNA Objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.2 | ColumnfwuRmtLNAType | read-only | current | Remote LNA card type. Valid LNA types are Cellular A(1), Cellular B(2), SMR Low(3), SMR High(4), PCS(5), AWS(6), SMR Low Wide(7), Full Cellular(8), GSM1800(9),… |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.3 | ColumnfwuRmtLNARIADCPartNumber | read-only | current | LNA Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.4 | ColumnfwuRmtLNARISerialNumber | read-only | current | LNA Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.5 | ColumnfwuRmtLNARIDateCode | read-only | current | LNA Inventory Data - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.6 | ColumnfwuRmtLNARIHWVer | read-only | current | LNA Inventory Data - HW version. |
| 1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.7 | ColumnfwuRmtDuplexerType | read-only | current | Duplexer hardware type. Valid Duplexer Types are cellularA(1), cellularB(2), smrLow(3), smrHigh(4), pcs(5), aws(6), smrLowWide(7), fullCellular(8), gsm1800(9),… |
| 1.3.6.1.4.1.2014.15.2.1.2.10.2 | NodefwuRmtLNATraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.10.2.2 | NotificationfwuRmtLNAPowerFault | current | PRU/URU Low Noise Amplifier (LNA) Power fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.10.2.3 | NotificationfwuRmtDuplexerFreqMismatchFault | current | Configured frequency range not supported by Duplexer. | |
| 1.3.6.1.4.1.2014.15.2.1.2.11 | NodefwuRmtRDIObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.11.1 | NodefwuRmtRDIInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1 | TablefwuRmtRDIInfoTable | not-accessible | current | This table maintains Information of remote RDI objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1 | RowfwuRmtRDIInfoEntry | not-accessible | current | Each entry in this table refers to RDI information. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.1 | ColumnfwuRmtRDINumber | read-only | current | A unique identifier for each RDI. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.2 | ColumnfwuRmtRDIRIADCPartNumber | read-only | current | RDI Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.3 | ColumnfwuRmtRDIRISerialNumber | read-only | current | RDI Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.4 | ColumnfwuRmtRDIRIDateCode | read-only | current | RDI Inventory Data - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.5 | ColumnfwuRmtRDIRIHWVer | read-only | current | RDI Inventory Data - HW version. |
| 1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.6 | ColumnfwuRmtRDIRIHWType | read-only | current | Identifies if RDI(1) or ALPACA(2) board. It may be unknown(0). |
| 1.3.6.1.4.1.2014.15.2.1.2.11.2 | NodefwuRmtRDITraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.11.2.1 | NotificationfwuRmtACPowerSupplyMon1Fault | current | AC Power monitor 1 Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.11.2.2 | NotificationfwuRmtACPowerSupplyMon2Fault | current | AC Power monitor 2 Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.11.2.3 | NotificationfwuRmtACPowerSupplyMon3Fault | current | AC Power monitor 3 Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.2.12 | NodefwuRmtRSIObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.2.12.1 | NodefwuRmtRSIInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1 | TablefwuRmtRSIInfoTable | not-accessible | current | This table maintains Information of Remote RSI objects. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1 | RowfwuRmtRSIInfoEntry | not-accessible | current | Each entry in this table refers to RSI information. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.1 | ColumnfwuRmtRSIRIADCPartNumber | read-only | current | Remote Inventory Data - TE Part Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.2 | ColumnfwuRmtRSIRISerialNumber | read-only | current | Remote Inventory Data - Serial Number. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.3 | ColumnfwuRmtRSIRIDateCode | read-only | current | Remote Inventory Data - Date Code. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.4 | ColumnfwuRmtRSIRIHWVer | read-only | current | Remote Inventory Data - Hardware version. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.5 | ColumnfwuRmtCapacity | read-only | current | The number of RF modules that can be installed in the remote. |
| 1.3.6.1.4.1.2014.15.2.1.2.12.2 | NodefwuRmtRSITraps | |||
| 1.3.6.1.4.1.2014.15.2.1.2.12.2.1 | NotificationfwuRmtACPowerSupplyMon4Fault | current | AC Power monitor 4 Fault. | |
| 1.3.6.1.4.1.2014.15.2.1.3 | NodefwuGeneralObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.3.1 | NodefwuNotifObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.3.1.1 | ScalarfwuTrapSequenceNumber | accessible-for-notify | current | Count of the total number of traps (including this trap), raised by the agent. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.2 | ScalarfwuTrapTimeStamp | accessible-for-notify | current | The trap time stamp. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.3 | ScalarfwuNotificationStatus | accessible-for-notify | current | The severity of the fault. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.4 | ScalarfwuModuleType | accessible-for-notify | current | The module type reporting alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.5 | ScalarfwuModuleNumber | accessible-for-notify | current | The numerical Id of module, for the above module type, reporting the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.6 | ScalarfwuTrapCode | accessible-for-notify | current | The unique ID of the trap. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.7 | ScalarfwuTrapNodeAddress | accessible-for-notify | current | Unit from which the trap originated. |
| 1.3.6.1.4.1.2014.15.2.1.3.1.8 | ScalarfwuAlarmedModuleName | accessible-for-notify | current | Name of the hardware module where the trap originated. |
| 1.3.6.1.4.1.2014.15.2.1.3.2 | NodefwuDARTMappingObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.3.2.1 | NodefwuDARTMappingInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1 | TablefwuDARTMappingTable | not-accessible | current | This table maintains Information of DART Mapping Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1 | RowfwuDARTMappingEntry | not-accessible | current | Each entry in this table refers to DART Mapping Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.1 | ColumnfwuDARTMappingIndex | read-only | current | DART Mapping Table Index. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.2 | ColumnfwuUnitID | read-create | current | Identifier for the unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.3 | ColumnfwuUnitDARTID | read-create | current | Identifier of DART on the unit. Since there is a maximum of 8 DARTs, the valid values are one to eight. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.4 | ColumnfwuUnitSFPID | read-create | current | Identifier of unit SFP connected to the mate DART (outgoing; away from the Host). Since there is a maximum of 8 SFPs, the valid values are one to eight. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.5 | ColumnfwuUnitDartPassBand | read-only | current | Band-Passband information of the linked DART on the host side. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.6 | ColumnfwuMateID | read-create | current | Identifier of (companion) mate unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.7 | ColumnfwuMateDARTID | read-create | current | Identifies the (companion) DART on mate unit. Since there is a maximum of 8 DARTs, the valid values are one to eight. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.8 | ColumnfwuMateSFPID | read-create | current | Identifies the remote SFP connected to the unit DART(incoming from direction of the Host). |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.9 | ColumnfwuMateDartPassband | read-only | current | Band-Passband information of the linked DART on the Mate side. |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.10 | ColumnfwuSFPStartTimeSlot | read-create | current | Value of the first time slot used on the fiber carrying RF from unit DART to mate DART. Though this is a read-write object, the end user can only read the valu… |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.11 | ColumnfwuSFPEndTimeSlot | read-create | current | Value of the last time slot used on the fiber carrying RF from unit DART to mate DART. Though this is a read-write object, the end user can only read the value… |
| 1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.12 | ColumnfwuMappingStatus | read-create | current | The status of the conceptual row. The status may be active or inactive. |
| 1.3.6.1.4.1.2014.15.2.1.3.3 | NodefwuSystemAlarmManagement | |||
| 1.3.6.1.4.1.2014.15.2.1.3.3.1 | TablefwuSystemAlarmManagementTable | not-accessible | current | This table maintains alarm managing property and threshold information of all alarms. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.1.1 | RowfwuSystemAlarmManagementEntry | not-accessible | current | Each entry in this table refers to Alarm management table Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.1.1.1 | ColumnfwuSystemAlarmcode | read-only | current | The alarm code.It is used as Table Index. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.1.1.2 | ColumnfwuSystemAlarmManageable | read-only | current | Indicates if the alarm is manageble(0) or not (1). If manageable, use fwuSystemAlarmEnabled, see below, to enable or disable the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.1.1.3 | ColumnfwuSystemAlarmThreshold | read-only | current | Alarm Threshold value. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.1.1.4 | ColumnfwuSystemAlarmModType | read-only | current | Identifies the module type which raised the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2 | TablefwuSystemModuleAlarmEnableTable | not-accessible | current | This table will allow the user to enable or disable an alarm. Use the fwuSystemAlarmManagementTable to check if the alarm is manageable or not. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2.1 | RowfwuSystemModuleAlarmEnableEntry | not-accessible | current | Each entry in this table refers to Module alarm enable table Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2.1.1 | ColumnfwuSystemTrapNodeAddress | read-write | current | The unit which raised the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2.1.2 | ColumnfwuSystemAlarmModuleNo | read-write | current | The module which raised the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2.1.3 | ColumnfwuSystemModuleAlarmcode | read-write | current | The alarm code. |
| 1.3.6.1.4.1.2014.15.2.1.3.3.2.1.4 | ColumnfwuSystemAlarmEnabled | read-write | current | This is used to enable or disable the alarm. Alarms is enabled by default, except the Uplink inactivity fault. |
| 1.3.6.1.4.1.2014.15.2.1.3.4 | NodefwuGeoObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.3.4.2 | TablefwuGeoTable | not-accessible | current | This table maintains Information of Geo Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1 | RowfwuGeoEntry | not-accessible | current | Each entry in this table refers to Geo Objects. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1.1 | ColumnfwuGeoIndex | read-write | current | Geo objects Table Index. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1.2 | ColumnfwuGeoLatitude | read-write | current | Identifies the Latitude of remote unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1.3 | ColumnfwuGeoLongitude | read-write | current | Identifies the Longitude of remote unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1.4 | ColumnfwuGeoRmtName | read-only | current | The Remote name. |
| 1.3.6.1.4.1.2014.15.2.1.3.4.2.1.5 | ColumnfwuGeoStatus | read-only | current | Standard SNMP row status for this table. |
| 1.3.6.1.4.1.2014.15.2.1.3.5 | NodefwuSnmpSettings | |||
| 1.3.6.1.4.1.2014.15.2.1.3.5.1 | ScalarfwuV1TrapAgentAddrOverrideMode | read-write | current | Provision to overide the default (1) or use default (0) agent address in v1 trap PDU. Use fwuV1TrapAgentAddrOverrideIPAddr to set the overriding agent address. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.2 | ScalarfwuV1TrapAgentAddrOverrideIPAddr | read-write | current | The overriding agent IP address in v1 trap PDU. Use Internet standard dot-decimal notation. Enable its use by setting fwuV1TrapAgentAddrOverrideMode. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.3 | ScalarfwuSnmpTrapResendInterval | read-write | current | Time, in seconds, to resend unacknowledged traps. The trap will not be resent if this is set to zero(0). Acknowledgement is not needed if resend is not require… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.4 | ScalarfwuSnmpTrapResendMaximum | read-write | current | Maximum number of times traps will be resent before removal if not acknowledged. If set to zero, it will not be resent. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7 | TablefwuSnmpTrapMgrConfigTable | not-accessible | current | Table containing information about the trap destinations. For changes to take effect, a (Host) reboot is required. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1 | RowfwuSnmpTrapMgrConfigEntry | not-accessible | current | An entry in the fwuSnmpTrapMgrConfigTable. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.1 | ColumnfwuTrapMgrRowId | not-accessible | current | The unique index of this trap destination. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.2 | ColumnfwuTrapMgrIpAddress | read-create | current | Provision to set the IP address of the trap manager. Use Internet standard dot-decimal notation. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.3 | ColumnfwuTrapMgrListeningPort | read-create | current | Provision to set the port at which the trap manager is listening for the traps. The default port for SNMP traps is 162. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.4 | ColumnfwuTrapMgrCommunity | read-create | current | The community used by the agent to send traps or informs to this manager. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.5 | ColumnfwuTrapVersion | read-create | current | The SNMP version used for this trap destination. The available versions are v1(0), v2c(1), inform(2) with v2c being set as default. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.7.1.6 | ColumnfwuTrapMgrRowStatus | read-create | current | The status of this conceptual row. This is used to manage the creation and deletion of this trap destination table. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.8 | ScalarfwuEnableNotifHysteresis | read-write | current | Provision to enable(1) or disable(0) event hysteresis. If disabled notification is sent out on occurance of the event. If enabled set the hysteresis value usin… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.9 | ScalarfwuEventNotifHysteresis | read-write | current | Time period, in seconds, for which an event has to persist before a notification is sent. For this value to be useable, ensure that fwuEnableNotifHysteresis is… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.10 | ScalarfwuEnableNotifInterval | read-write | current | Provision to enable(1) or disable(0) a time lag before sending out an event notification. If disabled, notification is sent out on the occurance of the event. … |
| 1.3.6.1.4.1.2014.15.2.1.3.5.11 | ScalarfwuEventNotifInterval | read-write | current | Provision to set the time lag in seconds between the successive event notifications. For this value to be useable, ensure that fwuEnableNotifInterval is enable… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12 | TablefwuSchedulerTable | not-accessible | current | Table containing information about the trap destinations. For changes to take effect, a (Host) reboot is required. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1 | RowfwuSchedulerEntry | not-accessible | current | An entry in the fwuSchedulerTable. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.1 | ColumnfwuTaskId | not-accessible | current | The unique index of the Scheduler table. Range limited to machine integer size(32 bit) restriction. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.2 | ColumnfwuTaskType | read-create | current | The task to be scheduled. If System Test is the task being scheduled it requires some more arguments. Use fwuFunctionArgs to provide them. After specifying a t… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.3 | ColumnfwuScheduleStatus | read-create | current | Provision to enable(1) or disable(0) the scheduled task (defined by fwuTaskType). |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.4 | ColumnfwuTaskStartTime | read-create | current | The start time of the scheduled activity. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.5 | ColumnfwuOccurrences | read-create | current | Provision to set the number of times the task is to be executed. Set a value greater than 0 for a finite number of executions. To keep executing forever, set v… |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.6 | ColumnfwuRecurrence | read-create | current | Provision to set the periodicity of the scheduled task. Eg. S5 is 5 Sec, H6 is 6 Hours, M8 is 8 Min. Note: This is also used for the time interval for sending … |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.7 | ColumnfwuFunctionArgs | read-create | current | Colon separated string of arguments required for the given task type. Can be empty depending on the task type. |
| 1.3.6.1.4.1.2014.15.2.1.3.5.12.1.8 | ColumnfwuRowStatus | read-create | current | The status of the conceptual row. This is used to manage the creation and deletion of the rows in scheduler table. |
| 1.3.6.1.4.1.2014.15.2.1.3.6 | NodefwuContactAlarmObjects | |||
| 1.3.6.1.4.1.2014.15.2.1.3.6.1 | NodefwuContactAlarmInfo | |||
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1 | TablefwuSystemContactAlarmMgmtTable | not-accessible | current | Entities in this table are applicable to all Prism and URH remote units. For Host and DRU, entities are applicable only for 2nd generation system cards and onw… |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1 | RowfwuSystemContactAlarmMgmtEntry | not-accessible | current | An entry (conceptual row) in the fwuSnmpTrapMgrConfigTable. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.1 | ColumnfwuUnitIndex | read-only | current | The number of the connected unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.2 | ColumnfwuSYstemAlarmCode | read-only | current | A code that uniquely identifies an alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.3 | ColumnfwuContactAlarm | read-only | current | Hardware Assigned Name. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.4 | ColumnfwuContactAlarmMode | read-write | current | Provision to set the mode of the alarm as normally closed (1) or normally open (2). |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.5 | ColumnfwuContactAlarmName | read-write | current | User defined name of the host unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 0 character (It… |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.6 | ColumnfwuContactAlarmEnable | read-write | current | Provision to enable (1) or disable (0) the contact alarm. The alarm is enabled by default. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.7 | ColumnfwuContactAlarmSeverity | read-write | current | Severity of the alarm. |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2 | NodefwuContactAlarmTraps | |||
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.1 | NotificationfwuHstContactAlarmOutput1 | current | Host contact output port state. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.2 | NotificationfwuHstContactAlarmOutput2 | current | Host contact output port state. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.3 | NotificationfwuHstContactAlarmInput1 | current | Host contact input port state. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.4 | NotificationfwuHstContactAlarmInput2 | current | Host contact input port state. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.5 | NotificationfwuRmtContactAlarmInput1 | current | Remote contact input port state- Summary of all connected remotes. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.6 | NotificationfwuRmtContactAlarmInput2 | current | Remote contact input port state- Summary of all connected remotes. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.7 | NotificationfwuRmtContactAlarmOutput1 | current | Remote contact output port state- Summary of all connected remotes. | |
| 1.3.6.1.4.1.2014.15.2.1.3.6.2.8 | NotificationfwuRmtContactAlarmOutput2 | current | Remote contact output port state- Summary of all connected remotes. | |
| 1.3.6.1.4.1.2014.15.2.1.3.7 | NodefwuSystemStaticAlarms | |||
| 1.3.6.1.4.1.2014.15.2.1.3.7.1 | TablefwuSystemStaticAlarmsTable | not-accessible | current | This is a static alarm table containing the statistics of units in the system. The major and minor alarms will be grouped separately for each of the units. |
| 1.3.6.1.4.1.2014.15.2.1.3.7.1.1 | RowfwuSystemStaticAlarmsEntry | not-accessible | current | Entries for units which can be either alarmed or not alarmed or not-discovered. |
| 1.3.6.1.4.1.2014.15.2.1.3.7.1.1.1 | ColumnfwuSystemUnitID | read-only | current | The ID of the unit from which the alarms has been raised. |
| 1.3.6.1.4.1.2014.15.2.1.3.7.1.1.2 | ColumnfwuSystemUnitType | read-only | current | The type of the from which the alarm has been raised. |
| 1.3.6.1.4.1.2014.15.2.1.3.7.1.1.3 | ColumnfwuUnitMajorAlarms | read-only | current | The major alarm name of the unit. |
| 1.3.6.1.4.1.2014.15.2.1.3.7.1.1.4 | ColumnfwuUnitMinorAlarms | read-only | current | The minor alarm name of the unit. |
| 1.3.6.1.4.1.2014.15.2.1.4 | NodeflexwaveurhMIBConformance | |||
| 1.3.6.1.4.1.2014.15.2.1.4.1 | NodeflexwaveurhMIBCompliances | |||
| 1.3.6.1.4.1.2014.15.2.1.4.1.1 | ComplianceflexwaveurhBasicCompliance | current | The compliance statement for Flexwave entities which implement the ADC-FLEXWAVE-URH-MIB. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2 | NodeflexwaveurhMIBGroups | |||
| 1.3.6.1.4.1.2014.15.2.1.4.2.1 | GroupfwuSerfGroup | current | A collection of Host and Remote SERF objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.2 | GroupfwuOpticsGroup | current | A collection of Host and Remote Optical and Ethernet port objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.3 | GroupfwuDartGroup | current | A collection of Host and Remote DART objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.4 | GroupfwuLnaGroup | current | A collection of Host and Remote LNA objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.5 | GroupfwuLpaGroup | current | A collection of Host and Remote LPA objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.6 | GroupfwuDuplexerGroup | current | A collection of Host and Remote Duplexer objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.7 | GroupfwuAlarmConfigGroup | current | A collection of Host and Remote Alarm configuration objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.8 | GroupfwuNotificationGroup | current | A collection of Host and Remote Notification objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.9 | GroupfwuLinkingGroup | current | A collection of RF linking configuration objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.10 | GroupfwuMateInfoGroup | current | A collection of mate information objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.11 | GroupfwuSprintModeGroup | current | A collection of objects supported in Sprint mode Objects. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.12 | GroupfwuSNMPSettingGroup | current | A collection of objects supported in System Link test. | |
| 1.3.6.1.4.1.2014.15.2.1.4.2.13 | GroupfwuSystemStaticAlarmsGroup | current | A collection of objects supported in Static Alarms Table. |