ADSL-MIB
24 objects
The commWorks enterprise defined MIB objects for ADSL
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrDisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.26 | IdentityusrAdsl | The commWorks enterprise defined MIB objects for ADSL | ||
| 1.3.6.1.4.1.429.4.26.1 | ScalarusrAdslXmitPower | read-only | current | Transmit power of ADSL transceiver represented in dB. |
| 1.3.6.1.4.1.429.4.26.2 | ScalarusrAdslRmtReqDwnConstStatus | read-write | current | Value corresponds to the downstream constellation requested. |
| 1.3.6.1.4.1.429.4.26.3 | ScalarusrAdslActualDwnConstStatus | read-only | current | Value corresponds to the actual downstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.4 | ScalarusrAdslRmtReqUpConstStatus | read-only | current | Value corresponds to the upstream constellation requested. |
| 1.3.6.1.4.1.429.4.26.5 | ScalarusrAdslActualUpConstStatus | read-only | current | Value corresponds to the actual upstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.6 | ScalarusrAdslFwRel | read-only | current | Firmware release number of the GTI supplied transceiver software module. |
| 1.3.6.1.4.1.429.4.26.7 | ScalarusrAdslStartletVerson | read-only | current | Value is a number that corresponds to the version number of the STARLET VLSI in the transceiver. |
| 1.3.6.1.4.1.429.4.26.8 | ScalarusrAdslMeanSqError | read-only | current | Received signal to noise ratio. |
| 1.3.6.1.4.1.429.4.26.9 | ScalarusrAdslEqualization | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.10 | ScalarusrAdslReceiverGain | read-write | current | Total receiver gain measured in dB. |
| 1.3.6.1.4.1.429.4.26.11 | ScalarusrAdslBytesErrCorrected | read-only | current | Number of bytes corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.12 | ScalarusrAdslBytesNotErrCorrected | read-only | current | Number of bytes not corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.13 | ScalarusrAdslOverflowCounter | read-only | current | Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows |
| 1.3.6.1.4.1.429.4.26.14 | ScalarusrAdslOpState | read-only | current | Defines the high level operating state of the transceiver. Used by the customer to determine whether the transceiver is in idle mode, data mode, test mode, or … |
| 1.3.6.1.4.1.429.4.26.15 | ScalarusrAdslStartupProgress | read-only | current | Defines the current detailed startup state of the transceiver. The LSB determines the major mode corresponding to startup in var usrAdslOpState. |
| 1.3.6.1.4.1.429.4.26.16 | ScalarusrAdslLastFailedStatus | read-only | current | Defines the last detailed state reached in usrAdslStartupProgress before startup failed. |
| 1.3.6.1.4.1.429.4.26.17 | ScalarusrAdslActualBaudDataRateDwn | read-only | current | Actual downstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.18 | ScalarusrAdslActualBaudDataRateDwnMar | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.19 | ScalarusrAdslActualBaudDataRateUp | read-only | current | Actual upstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.20 | ScalarusrAdslActualBaudDataRateUpMarg | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.21 | ScalarusrAdslCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the D56k WAN Driver. The value can be set to either save or load by a management sta… |
| 1.3.6.1.4.1.429.4.26.22 | ScalarusrAdslCfgFileName | read-only | current | The name of a ConfigFile to read/write the D56k parameters. If the value of this object is an empty string, then the D56k Driver uses the default name `@file:/… |
| 1.3.6.1.4.1.429.4.26.23 | ScalarusrAdslResetStatus | read-write | current | The Reset Status of the ADSL Starlet chipset |