ADSLATUR-MIB
88 objects
Adsl Atur Private Mib.
Imported Objects
| ATM-MIB | atmVclVci atmVclVpi |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4900.1.2.2 | IdentityadslAtur | Adsl Atur Private Mib. | ||
| 1.3.6.1.4.1.4900.1.2.2.1 | NodeadslAturSysInfo | |||
| 1.3.6.1.4.1.4900.1.2.2.1.1 | ScalaradslAturSysInfoSystemTime | read-write | current | System time specified by Manager after the trap adslAturTrapColdStart has received. |
| 1.3.6.1.4.1.4900.1.2.2.1.2 | ScalaradslAturSysInfoMagicNumber | read-only | current | Magic Number. This magic number is generated based on the system configuration change, and it will change if system configuraiton is changed. It can be used to… |
| 1.3.6.1.4.1.4900.1.2.2.1.3 | ScalaradslAturSysInfoFirmwareVersion | read-only | current | Firmware Version. Trap adslAturTrapColdStart will report this information to Manager when RTU coldstarts. After that, Manager can get this information any time. |
| 1.3.6.1.4.1.4900.1.2.2.1.4 | ScalaradslAturSysInfoPID | read-only | current | Product ID. Trap adslAturTrapColdStart will report this information to Manager when RTU coldstarts. After that, Manager can get this information any time. |
| 1.3.6.1.4.1.4900.1.2.2.1.5 | ScalaradslAturSysInfoVID | read-only | current | Vendor ID. Trap adslAturTrapColdStart will report this information to Manager when RTU coldstarts. After that, Manager can get this information any time. |
| 1.3.6.1.4.1.4900.1.2.2.1.6 | ScalaradslAturSysInfoDataPumpVersion | read-only | current | DataPump version. It is the firmware version of the ADSL data pump module. If the firmware of the data pump module is not separated from the RTU's firmware, it… |
| 1.3.6.1.4.1.4900.1.2.2.2 | NodeadslAturConfig | |||
| 1.3.6.1.4.1.4900.1.2.2.2.1 | NodeadslAturConfigSystem | |||
| 1.3.6.1.4.1.4900.1.2.2.2.1.1 | ScalaradslAturConfigSystemReboot | read-write | current | RTU reboot. When Manager set this var to reboot(1), the RTU will reboot immediately. Other values except reboot(1) will be ignored. When RTU reboots, any modif… |
| 1.3.6.1.4.1.4900.1.2.2.2.1.2 | ScalaradslAturConfigSystemSave | read-write | current | Save configuration to RTU's non-volatile memory. When Manager set this var to save(1), the RTU will save current configuration to non-volatile memory such as f… |
| 1.3.6.1.4.1.4900.1.2.2.2.1.3 | ScalaradslAturConfigSystemReset | read-write | current | Reset to RTU's null configuration or default configuration. When Manager set this var to resetToNull(1), the RTU will be resetted to null configuration; When M… |
| 1.3.6.1.4.1.4900.1.2.2.2.1.4 | ScalaradslAturConfigSystemTrapEnable | read-write | current | Toggle RTU Trap Send status. The default value is enabled(2). When Manager set this var to disabled(1), the RTU will not send trap any more until Manager set i… |
| 1.3.6.1.4.1.4900.1.2.2.2.2 | NodeadslAturConfigAdslLine | |||
| 1.3.6.1.4.1.4900.1.2.2.2.2.1 | ScalaradslAturConfigAdslLineTrellis | read-write | current | Adsl trellis coding, disabled or enabled. See G.DMT for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.2.2 | ScalaradslAturConfigAdslLineHandshake | read-write | current | Adsl handshake protocol selection. See G.DMT for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.2.3 | ScalaradslAturConfigAdslLineBitSwapping | read-write | current | Bit swapping, disabled or enabled. See G.DMT for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.3 | TableadslAturPvcTable | not-accessible | current | The table includes the following extension items about Pvc configuration: 1. encapsulation (adslAturPvcEncapsulation) 2. bridge (adslAturPvcBridge) 3. IGMP (ad… |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1 | RowadslAturPvcEntry | not-accessible | current | An entry of adslAturPvcTable. See AdslAturPvcEntry's definition below for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.1 | ColumnadslAturPvcIndex | read-only | current | The index of Pvc Table. It equals to the PVC instance Id. For example, for a RTU with 8 PVC: PVC1 to PVC8, the index PVC5 should be 5. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.2 | ColumnadslAturPvcAdminStatus | read-create | current | This Pvc's admin status, enabled or disabled. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.3 | ColumnadslAturPvcIfIndex | read-only | current | This PVC interface's location in ifTable, will be found by walking the entries with PVC types in ifTable and a specific instance Id(adslAturPvcIndex). |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.4 | ColumnadslAturPvcEncapsulation | read-create | current | This Pvc's encapsulation. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.5 | ColumnadslAturPvcBridge | read-create | current | This Pvc's bridge mode, disabled or enabled. If a PVC is bridge enabled, packets from this PVC side are transparently bridged to the LAN side, and packets from… |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.6 | ColumnadslAturPvcIGMP | read-create | current | This Pvc's IGMP mode, disabled or enabled. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.7 | ColumnadslAturPvcDHCPClient | read-create | current | This Pvc's DHCP Client mode, disabled or enabled. if a PVC's DHCP client is enabled, A DHCP client will be started to get an IP configuration from DHCP servers. |
| 1.3.6.1.4.1.4900.1.2.2.2.3.1.8 | ColumnadslAturPvcRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.4900.1.2.2.2.4 | TableadslAturPPPTable | not-accessible | current | The table extends ppp configuration by including: 1. Service name (adslAturPPPoEServiceName) 2. Disconnect Timeout (adslAturPPPDisconnectTimeout) 3. MSS (adslA… |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1 | RowadslAturPPPEntry | not-accessible | current | An entry of adslAturPPPTable. See AdslAturPPPEntry's definition below for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.1 | ColumnadslAturPPPIndex | read-only | current | The index of PPP Table. It equals to the PPP instance Id. For example, for RTU with a maximum 16 PPP: PPP1 through PPP16, the index of PPP2 should be 2. |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.2 | ColumnadslAturPPPAdminStatus | read-create | current | This PPP entry's admin status, disabled or enabled. |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.3 | ColumnadslAturPPPIfIndex | read-only | current | This PPP entry's location in ifTable, will be found by walking the entries with PPP types in ifTable and a specific instance Id(adslAturPPPIndex). |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.4 | ColumnadslAturPPPPhysicalIfIndex | read-create | current | The location of this PPP entry's physical interface (e.g. the PVC interface)in ifTable. |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.5 | ColumnadslAturPPPoEServiceName | read-create | current | PPPOE Service Name of this PPP connection if the underlying interface is of PPPOE encapsulation. A NULL string can be used to specify ANY service name. |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.6 | ColumnadslAturPPPDisconnectTimeout | read-create | current | PPP Idle Disconnect Timeout. If a non-zero adslAturPPPDisconnectTimeout is specified, the PPP connection will be disconnected if there is no outbound traffic o… |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.7 | ColumnadslAturPPPMSS | read-create | current | PPP MSS(Maximum Segment Size). To ensure interoperability with other hosts on the Internet, The MSS of any TCP connection established on this PPP connection wi… |
| 1.3.6.1.4.1.4900.1.2.2.2.4.1.8 | ColumnadslAturPPPRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.4900.1.2.2.2.5 | TableadslAturIPTable | not-accessible | current | The table includes the following: 1. IP Address (adslAturIPAddress) 2. Subnet Mask (adslAturSubnetMask) 3. Gateway (adslAturGateway) See AdslAturIPEntry's defi… |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1 | RowadslAturIPEntry | not-accessible | current | An entry of adslAturIPTable. See AdslAturIPEntry's definition below for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.1 | ColumnadslAturIpIndex | read-only | current | The index of IP Table. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.2 | ColumnadslAturIpAdminStatus | read-create | current | This IP entry's admin status, disabled or enabled. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.3 | ColumnadslAturIpPhysicalIfIndex | read-only | current | The location of this IP entry's physical interface (either PVC or PPP)in ifTable. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.4 | ColumnadslAturIPAddress | read-create | current | This IP entry's IP address. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.5 | ColumnadslAturSubnetMask | read-create | current | This IP entry's Subnet Mask. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.6 | ColumnadslAturGateway | read-create | current | This IP entry's Gateway. |
| 1.3.6.1.4.1.4900.1.2.2.2.5.1.7 | ColumnadslAturIPRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.4900.1.2.2.2.6 | TableadslAturDHCPServerTable | not-accessible | current | The DHCP Server table. See AdslAturDHCPServerEntry's definition below for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1 | RowadslAturDHCPServerEntry | not-accessible | current | An entry of adslAturDHCPServerTable. See AdslAturDHCPServerEntry's definition below for detail. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.1 | ColumnadslAturDHCPServerIndex | read-only | current | The index of DHCP Server table. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.2 | ColumnadslAturDHCPServerAdminStatus | read-create | current | This DHCP Server entry's admin status, disabled or enabled. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.3 | ColumnadslAturDHCPServerLowerIfIndex | read-only | current | The IfIndex of the interface on top which the DHCP server operates. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.4 | ColumnadslAturDHCPServerIpIndex | read-only | current | the IpIndex of adslAturIPEntry, on top of which DHCP server operates. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.5 | ColumnadslAturDHCPServerAddressPoolSelection | read-create | current | How the address pool of the DHCP server is allocated. If systemAllocated is selected, DHCP server allocates IP address pool based on RTU LAN and WAN configurat… |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.6 | ColumnadslAturDHCPServerAddressPoolBeginIp | read-create | current | The begin IP address of DHCP IP Pool. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.7 | ColumnadslAturDHCPServerAddressPoolEndIp | read-create | current | The End IP address of DHCP IP Pool. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.8 | ColumnadslAturDHCPServerGatewaySelection | read-create | current | How the gateway IP address is determined. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.9 | ColumnadslAturDHCPServerGatewayIp | read-create | current | The user defined gateway IP address of DHCP IP Pool. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.10 | ColumnadslAturDHCPServerLeaseTime | read-create | current | The lease time in terms of seconds. |
| 1.3.6.1.4.1.4900.1.2.2.2.6.1.11 | ColumnadslAturDHCPServerRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.4900.1.2.2.2.7 | NodeadslAturNat | |||
| 1.3.6.1.4.1.4900.1.2.2.2.7.1 | ScalaradslAturNatAdminStatus | read-write | current | NAT Mode: disabled, NAT, NAPT, or dynamic NAPT. NAT mode provides Network Address Translation service. Static NAT sessions are required. NAPT mode provides Net… |
| 1.3.6.1.4.1.4900.1.2.2.3 | NodeadslAturSysLog | |||
| 1.3.6.1.4.1.4900.1.2.2.3.1 | ScalaradslAturSysLogBeginTime | read-write | current | The start point of SysLog specified by Manager. |
| 1.3.6.1.4.1.4900.1.2.2.3.2 | ScalaradslAturSysLogEndTime | read-write | current | The end point of SysLog specified by Manager. |
| 1.3.6.1.4.1.4900.1.2.2.3.3 | TableadslAturSysLogTable | not-accessible | current | SysLog table confined by adslAturSysLogBeginTime and adslAturSysLogEndTime. It is a subset of the actual SysLog table in RTU. |
| 1.3.6.1.4.1.4900.1.2.2.3.3.1 | RowadslAturSysLogEntry | not-accessible | current | An entry of adslAturSysLogTable. |
| 1.3.6.1.4.1.4900.1.2.2.3.3.1.1 | ColumnadslAturSysLogIndex | read-only | current | The index of adslAturSysLogEntry. |
| 1.3.6.1.4.1.4900.1.2.2.3.3.1.2 | ColumnadslAturSysLogContent | read-only | current | The content of adslAturSysLogEntry. |
| 1.3.6.1.4.1.4900.1.2.2.3.4 | ScalaradslAturSysLogTrigger | read-write | current | This is the trigger to start syslog fetch. When Manager set this var to start(1), the Manager will begin to fetch all the entries in adslAturSysLogTable. Other… |
| 1.3.6.1.4.1.4900.1.2.2.4 | NodeadslAturFirmwareUpgrade | |||
| 1.3.6.1.4.1.4900.1.2.2.4.1 | ScalaradslAturUpgradeIP | read-write | current | The IP Address where to upgrade. |
| 1.3.6.1.4.1.4900.1.2.2.4.3 | ScalaradslAturUpgradeUSER | read-write | current | The Username required when upgrade. |
| 1.3.6.1.4.1.4900.1.2.2.4.4 | ScalaradslAturUpgradePASSWD | read-write | current | The Password required when upgrade. |
| 1.3.6.1.4.1.4900.1.2.2.4.5 | ScalaradslAturUpgradePATH | read-write | current | The PATH(and FILENAME) of the file to be upgraded. |
| 1.3.6.1.4.1.4900.1.2.2.4.6 | ScalaradslAturUpgradeStatus | read-only | current | This is the state indication when upgrading firmware. After having finished saving firmware to non-volatile memory, RTU agent will send a trap (adslAturTrapUpg… |
| 1.3.6.1.4.1.4900.1.2.2.4.7 | ScalaradslAturFTPOperCode | read-write | current | The FTP operation code. When Manager set this var to firmwareUpgrade(1), the RTU will begin to upgrade firmware. Other values, say, throughputTest(2) and dataB… |
| 1.3.6.1.4.1.4900.1.2.2.5 | NodeadslAturDiagnose | |||
| 1.3.6.1.4.1.4900.1.2.2.5.1 | NodeadslAturDiagnosePing | |||
| 1.3.6.1.4.1.4900.1.2.2.5.1.1 | ScalaradslAturPingAddr | read-write | current | The aim address to be pinged. |
| 1.3.6.1.4.1.4900.1.2.2.5.1.2 | ScalaradslAturPingPkgSize | read-write | current | The size(bytes) of a packet to be pinged. |
| 1.3.6.1.4.1.4900.1.2.2.5.1.3 | ScalaradslAturPingCount | read-write | current | The count of packets to be pinged. |
| 1.3.6.1.4.1.4900.1.2.2.5.1.4 | ScalaradslAturPingResult | read-only | current | The result of ping. The format is following: Aim IP Address=xxx.xxx.xxx.xxx Sent=xx Received=xx Lost=xx Min=xxms Max=xxms Average=xxms |
| 1.3.6.1.4.1.4900.1.2.2.5.1.5 | ScalaradslAturPingStatus | read-only | current | The status of ping. NotStarted(1) means the ping is not started; Started(2) means the ping is in progress; Over(3) means the ping is over. |
| 1.3.6.1.4.1.4900.1.2.2.5.1.6 | ScalaradslAturPingTrigger | read-write | current | This is the trigger to start PING. When Manager set this var to start(1), the RTU will start to ping immediately. Other values except start(1) will be ignored. |
| 1.3.6.1.4.1.4900.1.2.2.6 | NodeadslAturTrap | |||
| 1.3.6.1.4.1.4900.1.2.2.6.0.1 | NotificationadslAturTrapColdStart | current | The TRAP is to report RTU coldstart to Manager. RTU agent will send this trap once every minute until Manager got it. Manager will specify RTU system time(adsl… | |
| 1.3.6.1.4.1.4900.1.2.2.6.0.2 | NotificationadslAturTrapUpgradeDone | current | The TRAP is to report RTU upgrade status to Manager. |