ADTRAN-ATLAS-V35NX-MIB
60 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664 | Nodeadtran | |||
| 1.3.6.1.4.1.664.2 | NodeadMgmt | |||
| 1.3.6.1.4.1.664.2.154 | NodeadATLASmg | |||
| 1.3.6.1.4.1.664.2.154.1 | NodeadGenATLASmg | |||
| 1.3.6.1.4.1.664.2.154.1.7 | NodeadATLASV35Nxmg | |||
| 1.3.6.1.4.1.664.2.154.1.7.1 | ScalaradATLASV35NxIfNumber | read-only | mandatory | The number of V.35 Nx ports (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.664.2.154.1.7.2 | TableadATLASV35NxIfTable | not-accessible | mandatory | The ATLAS V.35 Nx Interface Status Table. |
| 1.3.6.1.4.1.664.2.154.1.7.2.1 | RowadATLASV35NxIfEntry | not-accessible | mandatory | An entry in the ATLAS V.35 Nx Interface Status Table. |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.1 | ColumnadATLASV35NxIfIndex | read-only | mandatory | This variable indicates the interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the … |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.2 | ColumnadATLASV35NxIfSlotNum | read-only | mandatory | This variable indicates the slot number of a particular ATLAS module with a V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.3 | ColumnadATLASV35NxIfPortNum | read-only | mandatory | This variable indicates the port number of a particular V.35 Nx interface on an ATLAS module. |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.4 | ColumnadATLASV35NxIfAlarmStatus | read-only | mandatory | This bit-encoded variable indicates the current alarm status of a V.35 Nx interface. This variable is encoded as follows: CLOCK SLIP ALARM 0x01 PLL ALARM 0x02 … |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.5 | ColumnadATLASV35NxIfDTEStatus | read-only | mandatory | This bit-encoded variable indicates the current state of the DTE leads on a V.35 Nx interface. This variable is encoded as follows: RTS 0x001 CTS 0x002 DTR 0x0… |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.6 | ColumnadATLASV35NxIfDataRate | read-only | mandatory | This variable indicates the current data rate of a V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.2.1.7 | ColumnadATLASV35NxIfPLLFifoStatus | read-only | mandatory | This bit-encoded variable indicates the current PLL/FIFO status of a V.35 Nx interface. This variable is encoded as follows: LOCK 0x01 RXE 0x02 RXF 0x04 TXE 0x… |
| 1.3.6.1.4.1.664.2.154.1.7.3 | TableadATLASV35NxIfInbandStatTable | not-accessible | mandatory | The ATLAS V.35 Nx Interface Inband Statistics Table. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1 | RowadATLASV35NxIfInbandStatEntry | not-accessible | mandatory | An entry in the ATLAS V.35 Nx Interface Inband Statistics Table. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.1 | ColumnadATLASV35NxIfInbandStatIndex | read-only | mandatory | This variable indicates the Interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the … |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.2 | ColumnadATLASV35NxIfInbandStatRxFrames | read-only | mandatory | This variable indicates the number of frames recieved by a particular V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.3 | ColumnadATLASV35NxIfInbandStatTxFrames | read-only | mandatory | This variable indicates the number of frames transmitted by a particular V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.4 | ColumnadATLASV35NxIfInbandStatRxBytes | read-only | mandatory | This variable indicates the number of bytes recieved by a particular V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.5 | ColumnadATLASV35NxIfInbandStatTxBytes | read-only | mandatory | This variable indicates the number of bytes transmitted by a particular V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.3.1.6 | ColumnadATLASV35NxIfInbandStatReset | read-write | mandatory | This variable is used to reset the inband statistics. |
| 1.3.6.1.4.1.664.2.154.1.7.4 | TableadATLASV35NxTstTable | not-accessible | mandatory | The ATLAS V.35 Nx Interface Test Table. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1 | RowadATLASV35NxTstEntry | not-accessible | mandatory | An entry in the ATLAS V.35 Nx Interface Test Table. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.1 | ColumnadATLASV35NxTstIndex | read-only | mandatory | This variable indicates the interface number of a particular V.35 Nx port within the ATLAS product. This number will be the same as the ifIndex located in the … |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.2 | ColumnadATLASV35NxTstLoopbk | read-write | mandatory | This variable controls the activation and deactivation of loopbacks on a particular V.35 Nx interface. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.3 | ColumnadATLASV35NxTstLoopbkStatus | read-only | mandatory | This variable indicates a V.35 Nx interface�s current loopback status by displaying one of the following status messages: � No loopback active � Looping … |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.4 | ColumnadATLASV35NxTst511Pattern | read-write | mandatory | This variable controls the activation and deactivation of the 511 test pattern generator and detector. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.5 | ColumnadATLASV35NxTstPatternSync | read-only | mandatory | This variable displays the synchronization status of the 511 pattern test. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.6 | ColumnadATLASV35NxTstPatternSyncLost | read-only | mandatory | This variable displays whether or not the synchronization was ever lost during the 511 pattern test. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.7 | ColumnadATLASV35NxTstPatternESs | read-only | mandatory | This variable indicates the number of seconds (after pattern sync) of the 511 pettern test that have contained at least one error. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.8 | ColumnadATLASV35NxTstInjectErrs | read-write | mandatory | Inject a 511 pattern error into the data stream. |
| 1.3.6.1.4.1.664.2.154.1.7.4.1.9 | ColumnadATLASV35NxTstClearRslts | read-write | mandatory | Reset all test results. |
| 1.3.6.1.4.1.664.2.154.15400700 | NodeadATLASV35NxSlipAlarmActive | This trap indicates a SLIP alarm is active. | ||
| 1.3.6.1.4.1.664.2.154.15400701 | NodeadATLASV35NxSlipAlarmInActive | This trap indicates a SLIP alarm is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400702 | NodeadATLASV35NxPLLAlarmActive | This trap indicates a PLL alarm is active. | ||
| 1.3.6.1.4.1.664.2.154.15400703 | NodeadATLASV35NxPLLAlarmInActive | This trap indicates a PLL alarm is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400704 | NodeadATLASV35NxZeroAlarmActive | This trap indicates a Zero alarm is active. | ||
| 1.3.6.1.4.1.664.2.154.15400705 | NodeadATLASV35NxZeroAlarmInActive | This trap indicates a Zero alarm is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400706 | NodeadATLASV35NxExtClkAlarmActive | This trap indicates a no external clock alarm is active. | ||
| 1.3.6.1.4.1.664.2.154.15400707 | NodeadATLASV35NxExtClkAlarmInActive | This trap indicates a no external clock alarm is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400708 | NodeadATLASV35NxRTSActive | This trap indicates the RTS Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400709 | NodeadATLASV35NxRTSInActive | This trap indicates the RTS Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400710 | NodeadATLASV35NxCTSActive | This trap indicates the CTS Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400711 | NodeadATLASV35NxCTSInActive | This trap indicates the CTS Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400712 | NodeadATLASV35NxDTRActive | This trap indicates the DTR Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400713 | NodeadATLASV35NxDTRInActive | This trap indicates the DTR Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400714 | NodeadATLASV35NxDSRActive | This trap indicates the DSR Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400715 | NodeadATLASV35NxDSRInActive | This trap indicates the DSR Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400716 | NodeadATLASV35NxDCDActive | This trap indicates the DCD Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400717 | NodeadATLASV35NxDCDInActive | This trap indicates the DCD Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400718 | NodeadATLASV35NxRIActive | This trap indicates the RI Lead is active. | ||
| 1.3.6.1.4.1.664.2.154.15400719 | NodeadATLASV35NxRIInActive | This trap indicates the RI Lead is inactive. | ||
| 1.3.6.1.4.1.664.2.154.15400720 | NodeadATLASV35NxTDActive | This trap indicates the presence of transistions on the TD lead. | ||
| 1.3.6.1.4.1.664.2.154.15400721 | NodeadATLASV35NxTDInActive | This trap indicates the absence of transistions on the TD lead. | ||
| 1.3.6.1.4.1.664.2.154.15400722 | NodeadATLASV35NxRDActive | This trap indicates the presence of transistions on the RD Lead. | ||
| 1.3.6.1.4.1.664.2.154.15400723 | NodeadATLASV35NxRDInActive | This trap indicates the absence of transistions on the RD Lead. | ||
| 1.3.6.1.4.1.664.2.154.15400724 | NodeadATLASV35NxECActive | This trap indicates the presence of transistions on the EC Lead. | ||
| 1.3.6.1.4.1.664.2.154.15400725 | NodeadATLASV35NxECInActive | This trap indicates the absence of transistions on the EC Lead. |