ADTRAN-DS1-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664 | Nodeadtran | |||
| 1.3.6.1.4.1.664.2 | NodeadMgmt | |||
| 1.3.6.1.4.1.664.2.3 | NodeadDS1mg | |||
| 1.3.6.1.4.1.664.2.3.1 | TableadDS1AlarmTable | not-accessible | mandatory | The DS1 Alarm Event Table. |
| 1.3.6.1.4.1.664.2.3.1.1 | RowadDS1AlarmEntry | not-accessible | mandatory | An entry in the DS1 Alarm Event Table. |
| 1.3.6.1.4.1.664.2.3.1.1.1 | ColumnadDS1AlarmIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified b… |
| 1.3.6.1.4.1.664.2.3.1.1.2 | ColumnadDS1AlarmEnable | read-write | mandatory | Enables or disables the generation of DS1 Alarm Traps for Line Status event changes. |
| 1.3.6.1.4.1.664.2.3.1.1.3 | ColumnadDS1LineEvent | read-only | mandatory | This bit map variable indicates state changes in the DS1 line status variable (dsx1LineStatus). When a line status bit changes state, the corresponding line ev… |
| 1.3.6.1.4.1.664.2.3.1.1.4 | ColumnadDS1LineArm | read-write | mandatory | This bit map variable arms or disarms an individual or group of events identified in adDS1LineEvent as a source for generation of DS1 Alarm Trap. The various a… |
| 1.3.6.1.4.1.664.2.3.2 | TableadDS1AlertTable | not-accessible | mandatory | The DS1 Alert Event Table. |
| 1.3.6.1.4.1.664.2.3.2.1 | RowadDS1AlertEntry | not-accessible | mandatory | An entry in the DS1 Alert Event Table. |
| 1.3.6.1.4.1.664.2.3.2.1.1 | ColumnadDS1AlertIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified b… |
| 1.3.6.1.4.1.664.2.3.2.1.2 | ColumnadDS1AlertEnable | read-write | mandatory | Enables or disables the generation of DS1 Alert Traps for Performance Monitor Threshold Crossing Alerts. |
| 1.3.6.1.4.1.664.2.3.2.1.3 | ColumnadDS1CurrentAlert | read-only | mandatory | This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Current 15 minute interval. An alert bit is set in this variable when the… |
| 1.3.6.1.4.1.664.2.3.2.1.4 | ColumnadDS1TotalAlert | read-only | mandatory | This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Total performance variables. An alert bit is set in this variable when th… |
| 1.3.6.1.4.1.664.2.3.2.1.5 | ColumnadDS1FarCurrentAlert | read-only | mandatory | This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Current 15 minute interval. An alert bit is set in this variable when the … |
| 1.3.6.1.4.1.664.2.3.2.1.6 | ColumnadDS1FarTotalAlert | read-only | mandatory | This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Total performance variables. An alert bit is set in this variable when the… |
| 1.3.6.1.4.1.664.2.3.2.1.7 | ColumnadDS1CurrentArm | read-write | mandatory | This variable arms and disarms an individual or group of alerts identified in adDS1CurrentAlert as a source for the generation of Threshold Crossing Alert Trap… |
| 1.3.6.1.4.1.664.2.3.2.1.8 | ColumnadDS1TotalArm | read-write | mandatory | This variable arms and disarms an individual or group of alerts identified in adDS1TotalAlert as a source for the generation of Threshold Crossing Alert Trap. … |
| 1.3.6.1.4.1.664.2.3.2.1.9 | ColumnadDS1FarCurrentArm | read-write | mandatory | This variable arms and disarms an individual or group of alerts identified in adDS1FarCurrentAlert as a source for the generation of Threshold Crossing Alert T… |
| 1.3.6.1.4.1.664.2.3.2.1.10 | ColumnadDS1FarTotalArm | read-write | mandatory | This variable arms and disarms an individual or group of alerts identified in adDS1FarTotalAlert as a source for the generation of Threshold Crossing Alert Tra… |
| 1.3.6.1.4.1.664.2.3.3 | NodeadDS1CurrentThreshold | |||
| 1.3.6.1.4.1.664.2.3.3.1 | ScalaradDS1CurrentThrsES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Errored Seconds parameter. The default value is 65 for an approximate BER level of (10** … |
| 1.3.6.1.4.1.664.2.3.3.2 | ScalaradDS1CurrentThrsSES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds parameter. The default value is 10 for an approximate BER level … |
| 1.3.6.1.4.1.664.2.3.3.3 | ScalaradDS1CurrentThrsSEFS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Framing Seconds parameter. The default value is 2 for an approximate BER… |
| 1.3.6.1.4.1.664.2.3.3.4 | ScalaradDS1CurrentThrsUAS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (1… |
| 1.3.6.1.4.1.664.2.3.3.5 | ScalaradDS1CurrentThrsCSS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Controlled Slip Seconds parameter. The default value is 1 for an approximate BER level of… |
| 1.3.6.1.4.1.664.2.3.3.6 | ScalaradDS1CurrentThrsPCVsf | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1.… |
| 1.3.6.1.4.1.664.2.3.3.7 | ScalaradDS1CurrentThrsPCVesf | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. D… |
| 1.3.6.1.4.1.664.2.3.3.8 | ScalaradDS1CurrentThrsLES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Line Errored Seconds parameter. The default value is 65 for an approximate BER level of (… |
| 1.3.6.1.4.1.664.2.3.3.9 | ScalaradDS1CurrentThrsLCV | read-write | mandatory | The DS1 performance monitor Threshold Value for the Current 15 minute Line Code Violations parameter. The default value is 13,340 for an approximate BER level … |
| 1.3.6.1.4.1.664.2.3.4 | NodeadDS1TotalThreshold | |||
| 1.3.6.1.4.1.664.2.3.4.1 | ScalaradDS1TotalThrsES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5). |
| 1.3.6.1.4.1.664.2.3.4.2 | ScalaradDS1TotalThrsSES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Severely Errored Seconds parameter. The default value is 100 for an approximate BER level of (10** -5… |
| 1.3.6.1.4.1.664.2.3.4.3 | ScalaradDS1TotalThrsSEFS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Severely Errored Framing Seconds parameter. The default value is 17 for an approximate BER level of (… |
| 1.3.6.1.4.1.664.2.3.4.4 | ScalaradDS1TotalThrsUAS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (10** -5). |
| 1.3.6.1.4.1.664.2.3.4.5 | ScalaradDS1TotalThrsCSS | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Controlled Slip Seconds parameter. The default value is 4 for an approximate BER level of(10** -5). |
| 1.3.6.1.4.1.664.2.3.4.6 | ScalaradDS1TotalThrsPCVsf | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. The default… |
| 1.3.6.1.4.1.664.2.3.4.7 | ScalaradDS1TotalThrsPCVesf | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. The default v… |
| 1.3.6.1.4.1.664.2.3.4.8 | ScalaradDS1TotalThrsLES | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Line Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5). |
| 1.3.6.1.4.1.664.2.3.4.9 | ScalaradDS1TotalThrsLCV | read-write | mandatory | The DS1 performance monitor Threshold Value for the Total Line Code Violations parameter. The default value is 133,400 for an approximate BER level of (10** -5… |