ADTRAN-DSUDPP-MIB
103 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664 | Nodeadtran | |||
| 1.3.6.1.4.1.664.1 | NodeadProducts | |||
| 1.3.6.1.4.1.664.1.8 | NodeadDSUDP | |||
| 1.3.6.1.4.1.664.1.8.806 | NodeadDSUDPSelfTestPass | The DSUDP Self Diagnostics Passed. | ||
| 1.3.6.1.4.1.664.1.8.807 | NodeadDSUDPSelfTestFail | The DSUDP Self Diagnostics Failed | ||
| 1.3.6.1.4.1.664.1.8.808 | NodeadDSUDPNetworkINS | The network channel is In-Service. The OOS/OOF condition has cleared. | ||
| 1.3.6.1.4.1.664.1.8.809 | NodeadDSUDPNetworkOOS | The network channel is in an Out-Of-Service state. | ||
| 1.3.6.1.4.1.664.1.8.810 | NodeadDSUDPdsuLoopbackClear | The DSU Loopback test condition cleared. | ||
| 1.3.6.1.4.1.664.1.8.811 | NodeadDSUDPdsuLoopback | The DSU Loopback test is active. | ||
| 1.3.6.1.4.1.664.1.8.812 | NodeadDSUDPchannelLoopbackClear | The Channel Loopback test cleared. | ||
| 1.3.6.1.4.1.664.1.8.813 | NodeadDSUDPchannelLoopback | The Channel Loopback test is active. | ||
| 1.3.6.1.4.1.664.1.8.814 | NodeadDSUDPocuLoopbackClear | The OCU Loopback test cleared. | ||
| 1.3.6.1.4.1.664.1.8.815 | NodeadDSUDPocuLoopback | The OCU Loopback test is active. | ||
| 1.3.6.1.4.1.664.1.8.867 | NodeadDSUDPThrsAlertDailyUAS | The Daily Un-Available Seconds UAS parameter has reached or exceeds its threshold value. | ||
| 1.3.6.1.4.1.664.1.8.875 | NodeadDSUDPThrsAlertDailyAvail | The daily percent channel availability has reached or dropped below its threshold value. | ||
| 1.3.6.1.4.1.664.1.8.883 | NodeadDSUDPThrsAlertIntUAS | The Interval Un-Available Seconds (UAS) parameter has reached or exceeds its threshold value. | ||
| 1.3.6.1.4.1.664.2 | NodeadMgmt | |||
| 1.3.6.1.4.1.664.2.8 | NodeadDSUDPmg | |||
| 1.3.6.1.4.1.664.2.8.3 | NodeadDSUDPprov | |||
| 1.3.6.1.4.1.664.2.8.3.1 | NodeadDSUDPprovNet | |||
| 1.3.6.1.4.1.664.2.8.3.1.1 | ScalaradDSUDPnetLoopRate | read-write | mandatory | Indicates the DS0 loop data rate |
| 1.3.6.1.4.1.664.2.8.3.1.2 | ScalaradDSUDPnetType | read-write | mandatory | Selects the network type |
| 1.3.6.1.4.1.664.2.8.3.1.3 | ScalaradDSUDPnetScrambler | read-write | mandatory | Disables/Enables Scrambling |
| 1.3.6.1.4.1.664.2.8.3.1.4 | ScalaradDSUDPnetRemoteCfg | read-write | mandatory | Enables/Disables configuration by a remote DSUDP |
| 1.3.6.1.4.1.664.2.8.3.2 | NodeadDSUDPprovDte | |||
| 1.3.6.1.4.1.664.2.8.3.2.1 | ScalaradDSUDPdteRate | read-write | mandatory | Selects bit rate of primary DTE |
| 1.3.6.1.4.1.664.2.8.3.2.2 | ScalaradDSUDPdteFormat | read-write | mandatory | Selects DTE data format |
| 1.3.6.1.4.1.664.2.8.3.2.3 | ScalaradDSUDPdteWordLength | read-write | mandatory | Selects DTE asynchronous word length |
| 1.3.6.1.4.1.664.2.8.3.2.4 | ScalaradDSUDPdteInBandCommand | read-write | mandatory | Selects DTE in-band command type |
| 1.3.6.1.4.1.664.2.8.3.2.5 | ScalaradDSUDPdteTxClock | read-write | mandatory | Selects transmit timing source |
| 1.3.6.1.4.1.664.2.8.3.2.6 | ScalaradDSUDPdteCSOptions | read-write | mandatory | Configures CS signal lead on primary DTE |
| 1.3.6.1.4.1.664.2.8.3.2.7 | ScalaradDSUDPdteAntiStream | read-write | mandatory | Configures DTE Anti-Streaming Disconnect |
| 1.3.6.1.4.1.664.2.8.3.2.8 | ScalaradDSUDPdteCDOptions | read-write | mandatory | Configures CD signal lead on primary DTE |
| 1.3.6.1.4.1.664.2.8.3.2.9 | ScalaradDSUDPdteTROptions | read-write | mandatory | Configures handling of TR lead from Primary DTE |
| 1.3.6.1.4.1.664.2.8.3.2.10 | ScalaradDSUDPdteSROptions | read-write | mandatory | Configures SR signal lead to primary DTE |
| 1.3.6.1.4.1.664.2.8.3.2.11 | ScalaradDSUDPdteRSCSDelay | read-write | mandatory | Configures DTE signals RS-CS delay |
| 1.3.6.1.4.1.664.2.8.3.3 | NodeadDSUDPprovTest | |||
| 1.3.6.1.4.1.664.2.8.3.3.1 | ScalaradDSUDPtestTimeout | read-write | mandatory | Configures test timeout in seconds |
| 1.3.6.1.4.1.664.2.8.3.3.2 | ScalaradDSUDPtestRdlCfg | read-write | mandatory | Enables/Disables response to Remote Digital Loopback |
| 1.3.6.1.4.1.664.2.8.3.4 | NodeadDSUDPprovDial | |||
| 1.3.6.1.4.1.664.2.8.3.4.1 | ScalaradDSUDPDialStored1 | read-write | mandatory | Edit or View stored Dial Location 1 |
| 1.3.6.1.4.1.664.2.8.3.4.2 | ScalaradDSUDPDialStored2 | read-write | mandatory | Edit or View stored Dial Location 2 |
| 1.3.6.1.4.1.664.2.8.3.4.3 | ScalaradDSUDPDialStored3 | read-write | mandatory | Edit or View stored Dial Location 3 |
| 1.3.6.1.4.1.664.2.8.3.4.4 | ScalaradDSUDPDialStored4 | read-write | mandatory | Edit or View stored Dial Location 4 |
| 1.3.6.1.4.1.664.2.8.3.4.5 | ScalaradDSUDPDialStored5 | read-write | mandatory | Edit or View stored Dial Location 5 |
| 1.3.6.1.4.1.664.2.8.3.4.6 | ScalaradDSUDPDialStored6 | read-write | mandatory | Edit or View stored Dial Location 6 |
| 1.3.6.1.4.1.664.2.8.3.4.7 | ScalaradDSUDPDialStored7 | read-write | mandatory | Edit or View stored Dial Location 7 |
| 1.3.6.1.4.1.664.2.8.3.4.8 | ScalaradDSUDPDialStored8 | read-write | mandatory | Edit or View stored Dial Location 8 |
| 1.3.6.1.4.1.664.2.8.3.4.9 | ScalaradDSUDPDialStored9 | read-write | mandatory | Edit or View stored Dial Location 9 |
| 1.3.6.1.4.1.664.2.8.3.4.10 | ScalaradDSUDPDialStored10 | read-write | mandatory | Edit or View stored Dial Location 10 |
| 1.3.6.1.4.1.664.2.8.3.4.11 | ScalaradDSUDPAutoAnswer | read-write | mandatory | Enables/Disables automatic answer of incoming calls |
| 1.3.6.1.4.1.664.2.8.4 | NodeadDSUDPperform | |||
| 1.3.6.1.4.1.664.2.8.4.2 | TableadDSUDPds0IntervalTable | not-accessible | mandatory | The DS0 Interval Table. |
| 1.3.6.1.4.1.664.2.8.4.2.1 | RowadDSUDPds0IntervalEntry | not-accessible | mandatory | An entry in the DS0 Interval Table. |
| 1.3.6.1.4.1.664.2.8.4.2.1.1 | ColumnadDSUDPds0IntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS0 interface to which this entry is applicable. |
| 1.3.6.1.4.1.664.2.8.4.2.1.2 | ColumnadDSUDPds0IntervalNumber | read-only | mandatory | A number between 1 and 97, where 1 is the current accumulating 15 minute interval and 2-97 are completed 15 minute intervals. 2 is the most recent completed in… |
| 1.3.6.1.4.1.664.2.8.4.2.1.3 | ColumnadDSUDPds0IntervalUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS0 interface in one of the 97, individual 15 minute, intervals. |
| 1.3.6.1.4.1.664.2.8.4.3 | TableadDSUDPds0DailyTable | not-accessible | mandatory | The DS0 Daily table. |
| 1.3.6.1.4.1.664.2.8.4.3.1 | RowadDSUDPds0DailyEntry | not-accessible | mandatory | An entry in the DS0 Daily table. |
| 1.3.6.1.4.1.664.2.8.4.3.1.1 | ColumnadDSUDPds0DailyIndex | read-only | mandatory | The index value which uniquely identifies the DS0 interface to which this entry is applicable. |
| 1.3.6.1.4.1.664.2.8.4.3.1.2 | ColumnadDSUDPds0DailyNumber | read-only | mandatory | A number between 1 and 7, where 1 is the current accumulating Daily Interval and 2-7 are the completed Daily Intervals. 2 is the most recent completed Daily In… |
| 1.3.6.1.4.1.664.2.8.4.3.1.3 | ColumnadDSUDPds0DailyUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS0 interface in one of the 7 Daily Intervals. |
| 1.3.6.1.4.1.664.2.8.4.3.1.4 | ColumnadDSUDPds0DailyAvail | read-only | mandatory | The percentage (times 100) of channel availability encountered by a DS0 interface in one of the 7 Daily Intervals. |
| 1.3.6.1.4.1.664.2.8.4.3.1.5 | ColumnadDSUDPds0DailyAvgAvail | read-only | mandatory | The percentage (times 100) of channel availability averaged over the last 7 days |
| 1.3.6.1.4.1.664.2.8.4.4 | TableadDSUDPds0IntervalThrsTable | not-accessible | mandatory | The DS0 Interval Threshold Table. |
| 1.3.6.1.4.1.664.2.8.4.4.1 | RowadDSUDPds0IntervalThrsEntry | not-accessible | mandatory | An entry in the DS0 Threshold Table. |
| 1.3.6.1.4.1.664.2.8.4.4.1.1 | ColumnadDSUDPds0IntervalThrsIndex | read-only | mandatory | The index value which uniquely identifies the DS0 interface to which this entry is applicable. |
| 1.3.6.1.4.1.664.2.8.4.4.1.2 | ColumnadDSUDPds0IntervalThrsUASs | read-write | mandatory | The DS0 performance monitor Threshold Value for the 15 minute Unavailable Seconds parameter. The default value is 1, which equates to approximately 99.9% Avail… |
| 1.3.6.1.4.1.664.2.8.4.5 | TableadDSUDPds0DailyThrsTable | not-accessible | mandatory | The DS0 Daily Threshold Table. |
| 1.3.6.1.4.1.664.2.8.4.5.1 | RowadDSUDPds0DailyThrsEntry | not-accessible | mandatory | An entry in the DS0 Threshold Table. |
| 1.3.6.1.4.1.664.2.8.4.5.1.1 | ColumnadDSUDPds0DailyThrsIndex | read-only | mandatory | The index value which uniquely identifies the DS0 interface to which this entry is applicable. |
| 1.3.6.1.4.1.664.2.8.4.5.1.2 | ColumnadDSUDPds0DailyThrsUASs | read-write | mandatory | The DS0 performance monitor Threshold Value for the Daily Unavailable Seconds parameter. The default value is 86, which equates to approximately 99.9% Availabi… |
| 1.3.6.1.4.1.664.2.8.4.5.1.3 | ColumnadDSUDPds0DailyThrsAvail | read-write | mandatory | The DS0 performance monitor Threshold Value for the percentage channel Availability parameter. The default value is 9950 (% times 100), which equates to 99.5% … |
| 1.3.6.1.4.1.664.2.8.4.6 | TableadDSUDPds0AlertTable | not-accessible | mandatory | The DS0 Performance Monitor Alert Table |
| 1.3.6.1.4.1.664.2.8.4.6.1 | RowadDSUDPds0AlertEntry | not-accessible | mandatory | An entry in the DS0 PM Alert Table |
| 1.3.6.1.4.1.664.2.8.4.6.1.1 | ColumnadDSUDPds0AlertIndex | read-only | mandatory | The index value which uniquely identifies the DS0 PM interface to which this entry is applicable. |
| 1.3.6.1.4.1.664.2.8.4.6.1.2 | ColumnadDSUDPds0AlertStatus | read-only | mandatory | This bit map variable indicates Threshold Crossing Events for DS0 performance monitored parameters. When a parameter exceeds its threshold value, the parameter… |
| 1.3.6.1.4.1.664.2.8.4.6.1.3 | ColumnadDSUDPds0AlertEnable | read-write | mandatory | This bit map variable enables changes in the DS0 PM Alert Status to generate a SNMP Trap. The alert enable bit values are: 1 Interval UAS 2 Daily UAS 4 Daily p… |
| 1.3.6.1.4.1.664.2.8.5 | NodeadDSUDPalarm | |||
| 1.3.6.1.4.1.664.2.8.5.1 | ScalaradDSUDPAlarmStatus | read-only | mandatory | This bit map variable indicates changes in the DSUDP status. When a status bit changes state, the the corresponding bit is set in this variable. The alarm even… |
| 1.3.6.1.4.1.664.2.8.5.2 | ScalaradDSUDPAlarmMajor | read-only | mandatory | A bit mask to select items of the AlarmStatus which represent a Major Alarm |
| 1.3.6.1.4.1.664.2.8.5.3 | ScalaradDSUDPAlarmMinor | read-only | mandatory | A bit mask to select items of the AlarmStatus which represent a Minor Alarm |
| 1.3.6.1.4.1.664.2.8.5.4 | ScalaradDSUDPAlarmAlert | read-only | mandatory | A bit mask to select items of the AlarmStatus which represent an Alert Alarm |
| 1.3.6.1.4.1.664.2.8.5.5 | ScalaradDSUDPAlarmInfo | read-only | mandatory | A bit mask to select items of the AlarmStatus which represent an Info Alarm |
| 1.3.6.1.4.1.664.2.8.5.6 | ScalaradDSUDPAlarmEnable | read-write | mandatory | This bit map variable enables changes in the DSUDP Alarm Status to generate a SNMP Trap. The alarm enable bit values are: 1 0 2 0 4 0 8 Self diagnostics failed… |
| 1.3.6.1.4.1.664.2.8.6 | NodeadDSUDPtest | |||
| 1.3.6.1.4.1.664.2.8.6.1 | ScalaradDSUDPTestCmd | read-write | mandatory | A SET performs the selected test |
| 1.3.6.1.4.1.664.2.8.6.2 | ScalaradDSUDPTestStatus | read-only | mandatory | Current test status |
| 1.3.6.1.4.1.664.2.8.6.3 | ScalaradDSUDPTestErrors | read-write | mandatory | This variable accumulates errors for the active test pattern. A SET operation will clear the error count. |
| 1.3.6.1.4.1.664.2.8.6.4 | ScalaradDSUDPTestRxPattern | read-only | mandatory | Receive test pattern status |
| 1.3.6.1.4.1.664.2.8.6.5 | ScalaradDSUDPSelfDiagnostics | read-only | mandatory | Current Self Test status |
| 1.3.6.1.4.1.664.2.8.6.6 | ScalaradDSUDPTestTxPattern | read-write | mandatory | SETs default transmit test pattern |
| 1.3.6.1.4.1.664.2.8.6.7 | ScalaradDSUDPInjectError | read-write | mandatory | SET injects one error into active test pattern |
| 1.3.6.1.4.1.664.2.8.7 | NodeadDSUDPstatus | |||
| 1.3.6.1.4.1.664.2.8.7.1 | ScalaradDSUDPStatusEIA | read-only | mandatory | Bit map status of Primay DTE EIA interface signals (off = 0, on = 1), where bit positions are: 1 RI 2 RD 4 SD 8 CD 16 CS 32 RS 64 SR 128 TR |
| 1.3.6.1.4.1.664.2.8.7.2 | ScalaradDSUDPStatusConnector | read-only | mandatory | The jumper selected DTE interface connector on DSUDP |
| 1.3.6.1.4.1.664.2.8.7.3 | ScalaradDSUDPMode | read-only | mandatory | Current mode of DSUDP |
| 1.3.6.1.4.1.664.2.8.7.4 | ScalaradDSUDPLedStatus | read-only | mandatory | This variable contains bit encoded values for LED status (0=off, 1=on): 1 IDL 2 ALM 4 TST 8 ERR |
| 1.3.6.1.4.1.664.2.8.8 | NodeadDSUDPcall | |||
| 1.3.6.1.4.1.664.2.8.8.1 | ScalaradDSUDPDialStored | read-write | mandatory | Dials the stored number in register 1-10 |
| 1.3.6.1.4.1.664.2.8.8.2 | ScalaradDSUDPManualDial | read-write | mandatory | A SET dials the input command string |
| 1.3.6.1.4.1.664.2.8.8.3 | ScalaradDSUDPAnswerCall | read-write | mandatory | A SET answers an incoming call |
| 1.3.6.1.4.1.664.2.8.8.4 | ScalaradDSUDPHangUp | read-write | mandatory | A SET commands the DSUDP to go on-hook |