ADTRAN-TSUIQ-MIB
215 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.1.147 | NodeadTSUIQ | |||
| 1.3.6.1.4.1.664.1.147.14701 | NodeadTSUIQNetworkPhysUp | This trap indicates that the physical layer of the network is now up. | ||
| 1.3.6.1.4.1.664.1.147.14702 | NodeadTSUIQNetworkPhysDown | This trap indicates that the physical layer of the network is now down. | ||
| 1.3.6.1.4.1.664.1.147.14703 | NodeadTSUIQNetworkLMIUp | This trap indicates that the LMI state of the network is now up. | ||
| 1.3.6.1.4.1.664.1.147.14704 | NodeadTSUIQNetworkLMIDown | This trap indicates that the LMI state of the network is now down. | ||
| 1.3.6.1.4.1.664.1.147.14705 | NodeadTSUIQColdStart | This trap indicates that a cold start has occurred. | ||
| 1.3.6.1.4.1.664.2.147 | NodeadTSUIQmg | |||
| 1.3.6.1.4.1.664.2.147.1 | NodeadTSUIQSystemConfig | |||
| 1.3.6.1.4.1.664.2.147.1.1 | ScalaradTSUIQPassword | read-write | mandatory | Sets the Telnet and Vt100 Control Password. |
| 1.3.6.1.4.1.664.2.147.1.2 | ScalaradTSUIQTOD | read-write | mandatory | Sets the Time of Day with format hh:mm. |
| 1.3.6.1.4.1.664.2.147.1.3 | ScalaradTSUIQDate | read-write | mandatory | Sets the Date with the format MM-DD-YY. |
| 1.3.6.1.4.1.664.2.147.1.4 | ScalaradTSUIQIpAddress | read-write | mandatory | Sets the unit's IP Address. |
| 1.3.6.1.4.1.664.2.147.1.5 | ScalaradTSUIQIpAddressMask | read-write | mandatory | Sets the Network Subnet Mask. |
| 1.3.6.1.4.1.664.2.147.1.6 | ScalaradTSUIQGatewayIpAddress | read-write | mandatory | Sets the Network Gateway IP Address. |
| 1.3.6.1.4.1.664.2.147.1.7 | ScalaradTSUIQTrapManagerIpAddress | read-write | mandatory | Sets the Trap Manager IP Address. |
| 1.3.6.1.4.1.664.2.147.1.8 | ScalaradTSUIQTrapManagerDLCI | read-write | mandatory | Sets the Trap Manager DLCI. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.1.9 | ScalaradTSUIQTrapManagerPort | read-write | mandatory | Selects the Trap Manager Port. |
| 1.3.6.1.4.1.664.2.147.1.10 | ScalaradTSUIQControPortBaud | read-write | mandatory | Selects the Control Port Baud Rate. |
| 1.3.6.1.4.1.664.2.147.1.11 | ScalaradTSUIQControPortMode | read-write | mandatory | Selects the Control Port Mode. |
| 1.3.6.1.4.1.664.2.147.1.12 | ScalaradTSUIQEnableTraps | read-write | mandatory | Overall trap enable/disable. |
| 1.3.6.1.4.1.664.2.147.1.13 | ScalaradTSUIQAlarmState | read-only | mandatory | This bit map variable indicates alarm conditions which are currently set. When an alarm condition occurs, the corresponding event bit is set in this variable. … |
| 1.3.6.1.4.1.664.2.147.1.14 | ScalaradTSUIQArmAlarm | read-write | mandatory | This bit map variable arms or disarms an individual or group of events identified in adFradAlarmState as a source for generation of an Alarm Trap. The various … |
| 1.3.6.1.4.1.664.2.147.1.15 | ScalaradTSUIQAbortConfig | read-write | mandatory | A Set will cancel current selections and reverts to the last saved configuration. |
| 1.3.6.1.4.1.664.2.147.1.16 | ScalaradTSUIQSaveConfig | read-write | mandatory | A Set will reset the unit and Save the current selections. |
| 1.3.6.1.4.1.664.2.147.2 | NodeadTSUIQNetPortConfig | |||
| 1.3.6.1.4.1.664.2.147.2.1 | ScalaradTSUIQNetPortFrameType | read-write | mandatory | Frame type for T1 interface |
| 1.3.6.1.4.1.664.2.147.2.2 | ScalaradTSUIQNetPortClockSource | read-write | mandatory | Timing source for the transmit side of the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.3 | ScalaradTSUIQNetPortLineCode | read-write | mandatory | Line code for the the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.4 | ScalaradTSUIQNetRxSensitivity | read-write | mandatory | Selects the gain of receiver for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.5 | ScalaradTSUIQNetPortLBO | read-write | mandatory | Line build out for the transmit side of the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.6 | ScalaradTSUIQNetChannelCount | read-write | mandatory | Selects the number of active channels for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.7 | ScalaradTSUIQNetChannelStart | read-write | mandatory | Selects the channel that begins the active channel list for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.8 | ScalaradTSUIQNetChannelBandwidth | read-write | mandatory | Selects the amount of data in each active channel for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.9 | ScalaradTSUIQNetChannelAlignment | read-write | mandatory | Selects the alignment of active channels for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.10 | ScalaradTSUIQNetTransmitPRM | read-write | mandatory | Enables performance report generation across the T1 FDL for the T1 interface. |
| 1.3.6.1.4.1.664.2.147.2.11 | ScalaradTSUIQNetPortSignaling | read-write | mandatory | Signaling type for the frame relay management interface. |
| 1.3.6.1.4.1.664.2.147.2.12 | ScalaradTSUIQNetPortt391 | read-write | mandatory | Sets the polling interval in seconds for the frame relay management interface. (Range 5 - 30). |
| 1.3.6.1.4.1.664.2.147.2.13 | ScalaradTSUIQNetPortn391 | read-write | mandatory | Sets the interval between full status polls for the frame relay management interface. (Range 1 - 255). |
| 1.3.6.1.4.1.664.2.147.2.14 | ScalaradTSUIQNetPortn392 | read-write | mandatory | Sets the error count for the frame relay management interface. (Range 1 - 10). |
| 1.3.6.1.4.1.664.2.147.2.15 | ScalaradTSUIQNetPortn393 | read-write | mandatory | Sets the event window for the frame relay management interface. ( Range 1 - 10). |
| 1.3.6.1.4.1.664.2.147.2.16 | ScalaradTSUIQNetPortMgmtDlci1Mode | read-write | mandatory | Sets the mode for the managent DLCI 1. If set for shared, management DLCI 1 is used for customer data and IQ management data. If set for dedicated, management … |
| 1.3.6.1.4.1.664.2.147.2.17 | ScalaradTSUIQNetPortMgmtDlci2Mode | read-write | mandatory | Sets the mode for the managent DLCI 2. If set for shared, management DLCI 2 is used for customer data and IQ management data. If set for dedicated, management … |
| 1.3.6.1.4.1.664.2.147.2.18 | ScalaradTSUIQNetMgmtDlci1 | read-write | mandatory | Sets the address for management PVC 1. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.2.19 | ScalaradTSUIQNetMgmtDlci2 | read-write | mandatory | Sets the address for management PVC 2. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.2.20 | ScalaradTSUIQNetPortMaxPVCs | read-write | mandatory | Sets the maxium PVCs supported by the IQ unit. (Range 1 - 100). |
| 1.3.6.1.4.1.664.2.147.2.21 | ScalaradTSUIQNetPortHistIntervals | read-write | mandatory | Sets the number of history intervals for storage. |
| 1.3.6.1.4.1.664.2.147.2.22 | ScalaradTSUIQNetPortHistIntervalsAvailable | read-only | mandatory | Returns the number of history intervals allowed based on the maxium number of PVCs selected. |
| 1.3.6.1.4.1.664.2.147.3 | NodeadTSUIQDtePortConfig | |||
| 1.3.6.1.4.1.664.2.147.3.1 | ScalaradTSUIQDteCTSOption | read-write | mandatory | Selects the Clear to Send (CTS) option. |
| 1.3.6.1.4.1.664.2.147.3.2 | ScalaradTSUIQDteCDOption | read-write | mandatory | Selects the Carrier Detect (CD) option. |
| 1.3.6.1.4.1.664.2.147.3.3 | ScalaradTSUIQDteDSROption | read-write | mandatory | Selects the Data Set Ready (DSR) option. |
| 1.3.6.1.4.1.664.2.147.3.4 | ScalaradTSUIQDtePortMgmtDLCI | read-write | mandatory | Selects the DTE Port Management DLCI. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.3.5 | ScalaradTSUIQDtePortt392 | read-write | mandatory | Sets the timeout in seconds between polling intervals. (Range 5 - 30).. |
| 1.3.6.1.4.1.664.2.147.3.6 | ScalaradTSUIQDtePortn392 | read-write | mandatory | Sets the number of error events for the frame relay management. (Range 1 - 10).. |
| 1.3.6.1.4.1.664.2.147.3.7 | ScalaradTSUIQDtePortn393 | read-write | mandatory | Sets the error window (polling events) for the frame relay management. (Range 1 - 10). |
| 1.3.6.1.4.1.664.2.147.3.8 | ScalaradTSUIQDteTCClockOption | read-write | mandatory | Sets the phase of the DTE Transmit clock. |
| 1.3.6.1.4.1.664.2.147.3.9 | ScalaradTSUIQDteManagementPvcOption | read-write | mandatory | Controls the presence of the DTE management PVC in a full status response to the DTE device. |
| 1.3.6.1.4.1.664.2.147.3.10 | ScalaradTSUIQDteSignalingResponsesOption | read-write | mandatory | Determines how the IQ device will respond to polls from the DTE device during a network failure. If set to always on, the IQ will respond to polls during a net… |
| 1.3.6.1.4.1.664.2.147.3.11 | ScalaradTSUIQDteFlowControlOption | read-write | mandatory | Determines how the IQ device will respond to congestion during DBU operation. If set for none, the IQ will drop frames during DBU operation when severe congest… |
| 1.3.6.1.4.1.664.2.147.4 | NodeadTSUIQPvcConfig | |||
| 1.3.6.1.4.1.664.2.147.4.1 | TableadTSUIQPvcConfigTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.4.1.1 | RowadTSUIQPvcConfigEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.4.1.1.1 | ColumnadTSUIQPvcConfigIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.4.1.1.2 | ColumnadTSUIQPvcDLCI | read-write | mandatory | Address for this PVC entry. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.4.1.1.3 | ColumnadTSUIQPvcCIR | read-write | mandatory | Commited Information Rate for this PVC in Kbps. (Range 0 - 1536). |
| 1.3.6.1.4.1.664.2.147.4.1.1.4 | ColumnadTSUIQPvcSequenceOption | read-write | mandatory | Sequence number allows the IQ to detect lost frames across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends. |
| 1.3.6.1.4.1.664.2.147.4.1.1.5 | ColumnadTSUIQPvcDelayPacketOption | read-write | mandatory | Delay packet option for this PVC allows the IQ to sample round trip delay across the frame relay service. This option should be disabled for PVCs that do not h… |
| 1.3.6.1.4.1.664.2.147.4.1.1.6 | ColumnadTSUIQPvcDBUDLCI | read-write | mandatory | Used when this PVC entry is used for dial backup. This value should contain the PVC address as seen on the far end of the PVC. |
| 1.3.6.1.4.1.664.2.147.4.1.1.7 | ColumnadTSUIQPvcStatsControl | read-write | mandatory | Stats Control option determines how the IQ will track statistics for this PVC entry. Auto will allow the IQ to track statistics for a PVC if enough memory is a… |
| 1.3.6.1.4.1.664.2.147.5 | NodeadTSUIQCurrentStatus | |||
| 1.3.6.1.4.1.664.2.147.5.1 | ScalaradTSUIQT1State | read-only | mandatory | Current status of the T1 interface |
| 1.3.6.1.4.1.664.2.147.5.2 | ScalaradTSUIQDteControlLeads | read-only | mandatory | This bit map integer reflects the current state of the DTE control leads as follows: bit meaning 0 CTS 1 RTS 2 DSR 3 DTR 4 DCD A 1 means the lead is on. |
| 1.3.6.1.4.1.664.2.147.5.3 | ScalaradTSUIQDBUPortType | read-only | mandatory | Returns the DBU card type installed. |
| 1.3.6.1.4.1.664.2.147.5.4 | ScalaradTSUIQLANPortStatus | read-only | mandatory | Returns the LAN card type installed. |
| 1.3.6.1.4.1.664.2.147.5.5 | ScalaradTSUIQLEDstatus | read-only | mandatory | This bit map integer reflects TSUIQ front panel LED state as follows: bit meaning 0 TEST 1 ALARM 2 ERROR 3 RD 4 TD 5 CTS 6 RTS |
| 1.3.6.1.4.1.664.2.147.5.6 | ScalaradTSUIQDTESignalingState | read-only | mandatory | Current state of the PVC signaling between the TSUIQ and the attached frame relay dte. |
| 1.3.6.1.4.1.664.2.147.5.7 | ScalaradTSUIQNETSignalingState | read-only | mandatory | Current state of the PVC signaling between the TSUIQ and the frame relay service. |
| 1.3.6.1.4.1.664.2.147.5.8 | ScalaradTSUIQNETPVCCount | read-only | mandatory | Current count of network pvcs. |
| 1.3.6.1.4.1.664.2.147.5.9 | ScalaradTSUIQNETPVCConfigTableSize | read-only | mandatory | Current count of rows in the PVC config table. |
| 1.3.6.1.4.1.664.2.147.5.10 | ScalaradTSUIQDBUState | read-only | mandatory | Current state of the DBU interface. |
| 1.3.6.1.4.1.664.2.147.6 | NodeadTSUIQIntT1Status | |||
| 1.3.6.1.4.1.664.2.147.6.1 | TableadTSUIQIntT1StatusTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.6.1.1 | RowadTSUIQIntT1StatusEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.6.1.1.1 | ColumnadTSUIQIntT1SlotIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.6.1.1.2 | ColumnadTSUIQIntT1UnavailableTime | read-only | mandatory | Amount of time in seconds the T1 port is unavailable due to test or in an inactive state. |
| 1.3.6.1.4.1.664.2.147.6.1.1.3 | ColumnadTSUIQIntT1StateChange | read-only | mandatory | Number of changes in the T1 port state. This includes all normal, inactive, and test state transitions. |
| 1.3.6.1.4.1.664.2.147.6.1.1.4 | ColumnadTSUIQIntT1SignalLossEvent | read-only | mandatory | Active state represents one or more signal loss events. |
| 1.3.6.1.4.1.664.2.147.6.1.1.5 | ColumnadTSUIQIntT1LoopBackEvent | read-only | mandatory | Active state represents one or more loopback events. |
| 1.3.6.1.4.1.664.2.147.6.1.1.6 | ColumnadTSUIQIntT1AISEvent | read-only | mandatory | Active state represents one or more AIS events. AIS is triggered by unframed all ones condition from the T1 service provider. |
| 1.3.6.1.4.1.664.2.147.6.1.1.7 | ColumnadTSUIQIntT1RedAlarmEvent | read-only | mandatory | Active state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive T1 signal. |
| 1.3.6.1.4.1.664.2.147.6.1.1.8 | ColumnadTSUIQIntT1YellowAlarmEvent | read-only | mandatory | Active state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has lost frame alignmnet. |
| 1.3.6.1.4.1.664.2.147.6.1.1.9 | ColumnadTSUIQIntT1PLLAlarmEvent | read-only | mandatory | Active state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and receive side of the T1 interface are not looped timed. T… |
| 1.3.6.1.4.1.664.2.147.6.1.1.10 | ColumnadTSUIQIntT1PathCodeViolation | read-only | mandatory | Count of path code violations received. Path code violations are a errors in the frame bit postions for D4 and ESF CRC errors when set for ESF. |
| 1.3.6.1.4.1.664.2.147.6.1.1.11 | ColumnadTSUIQIntT1LineCodeViolation | read-only | mandatory | Count of line code violations received. Line code violations are a combination of BPVs that are not part of B8ZS code and excess zeros. Excess zeros are 8 or m… |
| 1.3.6.1.4.1.664.2.147.7 | NodeadTSUIQDayT1Status | |||
| 1.3.6.1.4.1.664.2.147.7.1 | TableadTSUIQDayT1StatusTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.7.1.1 | RowadTSUIQDayT1StatusEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.7.1.1.1 | ColumnadTSUIQDayT1SlotIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.7.1.1.2 | ColumnadTSUIQDayT1UnavailableTime | read-only | mandatory | Amount of time in seconds the T1 port is unavailable due to test or in an inactive state. |
| 1.3.6.1.4.1.664.2.147.7.1.1.3 | ColumnadTSUIQDayT1StateChange | read-only | mandatory | Number of changes in the T1 port state. This includes all normal, inactive, and test state transitions. |
| 1.3.6.1.4.1.664.2.147.7.1.1.4 | ColumnadTSUIQDayT1SignalLossEvent | read-only | mandatory | Active state represents one or more signal loss events. |
| 1.3.6.1.4.1.664.2.147.7.1.1.5 | ColumnadTSUIQDayT1LoopBackEvent | read-only | mandatory | Active state represents one or more loopback events. |
| 1.3.6.1.4.1.664.2.147.7.1.1.6 | ColumnadTSUIQDayT1AISEvent | read-only | mandatory | Active state represents one or more AIS events. AIS is triggered by unframed all ones condition from the T1 service provider. |
| 1.3.6.1.4.1.664.2.147.7.1.1.7 | ColumnadTSUIQDayT1RedAlarmEvent | read-only | mandatory | Active state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive T1 signal. |
| 1.3.6.1.4.1.664.2.147.7.1.1.8 | ColumnadTSUIQDayT1YellowAlarmEvent | read-only | mandatory | Active state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has lost frame alignmnet. |
| 1.3.6.1.4.1.664.2.147.7.1.1.9 | ColumnadTSUIQDayT1PLLAlarmEvent | read-only | mandatory | Active state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and receive side of the T1 interface are not looped timed. T… |
| 1.3.6.1.4.1.664.2.147.7.1.1.10 | ColumnadTSUIQDayT1PathCodeViolation | read-only | mandatory | Count of path code violations received. Path code violations are a errors in the frame bit postions for D4 and ESF CRC errors when set for ESF. |
| 1.3.6.1.4.1.664.2.147.7.1.1.11 | ColumnadTSUIQDayT1LineCodeViolation | read-only | mandatory | Count of line code violations received. Line code violations are a combination of BPVs that are not part of B8ZS code and excess zeros. Excess zeros are 8 or m… |
| 1.3.6.1.4.1.664.2.147.8 | NodeadTSUIQDiagnostic | |||
| 1.3.6.1.4.1.664.2.147.8.1 | TableadTSUIQDiagnosticTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.8.1.1 | RowadTSUIQDiagnosticEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.8.1.1.1 | ColumnadTSUIQDiagnosticIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.8.1.1.2 | ColumnadTSUIQDiagnosticDlci | read-only | mandatory | Sets the DLCI for PVC Loopback. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.8.1.1.3 | ColumnadTSUIQDiagnosticControl | read-write | mandatory | Starts or Stops the PVC Loopback Test. |
| 1.3.6.1.4.1.664.2.147.8.1.1.4 | ColumnadTSUIQDiagnosticDuration | read-write | mandatory | Test duration in seconds. |
| 1.3.6.1.4.1.664.2.147.8.1.1.5 | ColumnadTSUIQDiagnosticStatus | read-write | mandatory | PVC Loopback Test Status. (Active/Inactive). |
| 1.3.6.1.4.1.664.2.147.8.1.1.6 | ColumnadTSUIQDiagnosticSecondsRemaining | read-only | mandatory | PVC Loopback Test time remaining in seconds. |
| 1.3.6.1.4.1.664.2.147.8.1.1.7 | ColumnadTSUIQDiagnosticFramesTx | read-only | mandatory | Diagnostic Frames transmitted. |
| 1.3.6.1.4.1.664.2.147.8.1.1.8 | ColumnadTSUIQDiagnosticFramesRx | read-only | mandatory | Diagnostic Frames received. |
| 1.3.6.1.4.1.664.2.147.8.1.1.9 | ColumnadTSUIQDiagnosticLostFrames | read-only | mandatory | Diagnostic Frames Lost. |
| 1.3.6.1.4.1.664.2.147.8.1.1.10 | ColumnadTSUIQDiagnosticMaxDelay | read-only | mandatory | Diagnostic Maximum Delay measurement. |
| 1.3.6.1.4.1.664.2.147.8.1.1.11 | ColumnadTSUIQDiagnosticMinDelay | read-only | mandatory | Diagnostic Minimum Delay measurement. |
| 1.3.6.1.4.1.664.2.147.8.1.1.12 | ColumnadTSUIQDiagnosticAvgDelay | read-only | mandatory | Diagnostic Average Delay measurement. |
| 1.3.6.1.4.1.664.2.147.9 | NodeadTSUIQ1406Time | |||
| 1.3.6.1.4.1.664.2.147.9.1 | TableadTSUIQ1406TimeTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.9.1.1 | RowadTSUIQ1406TimeEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.9.1.1.1 | ColumnadTSUIQ1406TimeSlotIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.9.1.1.2 | ColumnadTSUIQ1406TimeStamp | read-only | mandatory | Time interval started. Format H:M if not midnight else M-D |
| 1.3.6.1.4.1.664.2.147.10 | NodeadTSUIQDBUConfig | |||
| 1.3.6.1.4.1.664.2.147.10.1 | ScalaradTSUIQDBUOption | read-write | mandatory | This option specifies whether the unit automatically enters dial backup mode or waits for manual setup. |
| 1.3.6.1.4.1.664.2.147.10.2 | ScalaradTSUIQDBUStartLockout | read-write | mandatory | This option selects the hour to begin disabling dial backup operation when daily or weekend lockout mode is active. |
| 1.3.6.1.4.1.664.2.147.10.3 | ScalaradTSUIQDBUEndLockout | read-write | mandatory | This option selects the hour to end dial backup lockout when daily or weekend lockout mode is active. |
| 1.3.6.1.4.1.664.2.147.10.4 | ScalaradTSUIQDBUMode | read-write | mandatory | This option specifies the dial backup operating mode for the unit as orginate or answer. One end must be set to originate and the other end to answer. |
| 1.3.6.1.4.1.664.2.147.10.5 | ScalaradTSUIQDBUWithNetworkFailure | read-write | mandatory | This option enables the unit to enter backup mode when T1 network failure occurs. |
| 1.3.6.1.4.1.664.2.147.10.6 | ScalaradTSUIQDBUNoLMI | read-write | mandatory | This option enables the unit to enter backup mode when network PVC signaling state goes down. |
| 1.3.6.1.4.1.664.2.147.10.7 | ScalaradTSUIQAutoRestoreTimer | read-write | mandatory | This option selects the amount of time that the TSUIQ circuit must be active before the unit switches from backup to normal mode of operation. The timer value … |
| 1.3.6.1.4.1.664.2.147.10.8 | ScalaradTSUIQRedialCount | read-write | mandatory | This option allows the selection of the number of times the unit will redial the Far End unit when attempting to go to backup and a busy or reorder condition o… |
| 1.3.6.1.4.1.664.2.147.10.9 | ScalaradTSUIQDBUFailTimeout | read-write | mandatory | This option allows the selection of the amount of time that the dedicated circuit failure condition is active before attempting to enter dial backup mode. The … |
| 1.3.6.1.4.1.664.2.147.10.10 | ScalaradTSUIQDBURedialTimer | read-write | mandatory | This option works in conjunction with the Redial Counter option. The Redial Timer specifies the amount of time between redial attempts. The Redial Timer value … |
| 1.3.6.1.4.1.664.2.147.10.11 | ScalaradTSUIQDBUPassCheck | read-write | mandatory | This option allows the unit to send and verify a dial backup passcode for an additional level of security. When enabled, the originate unit sends the passcode … |
| 1.3.6.1.4.1.664.2.147.10.12 | ScalaradTSUIQDBUPassCode | read-write | mandatory | This option sets the dial backup passcode used to provide an additional level of security. A passcode of one to ten digit characters can be set. If enabled, th… |
| 1.3.6.1.4.1.664.2.147.10.13 | ScalaradTSUIQWeekendLockout | read-write | mandatory | This option enables or disables Weekend Lockout for Dial Backup operation. If enabled, no backup will occur from midnight Friday to midnight Sunday. |
| 1.3.6.1.4.1.664.2.147.10.14 | ScalaradTSUIQDailyLockout | read-write | mandatory | This option enables or disables Daily Lockout for Dial Backup operation. If enabled, no backup will occur between Lockout Start hour and Lockout End hour. |
| 1.3.6.1.4.1.664.2.147.10.15 | ScalaradTSUIQAnswerAlways | read-write | mandatory | This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions. |
| 1.3.6.1.4.1.664.2.147.10.16 | ScalaradTSUIQBeeperOption | read-write | mandatory | This option enables or disables the audible alarm when the IQ unit goes into dial backup mode. |
| 1.3.6.1.4.1.664.2.147.10.17 | ScalaradTSUIQDBUPhoneNumber1 | read-write | mandatory | This option is used to set a phone number to place a DBU call. |
| 1.3.6.1.4.1.664.2.147.10.18 | ScalaradTSUIQDBUPhoneNumber2 | read-write | mandatory | This option is used to set a phone number to place a DBU call. |
| 1.3.6.1.4.1.664.2.147.10.19 | ScalaradTSUIQDBUPhoneNumber3 | read-write | mandatory | This option is used to set a phone number to place a DBU call. |
| 1.3.6.1.4.1.664.2.147.10.20 | ScalaradTSUIQDBUPhoneNumber4 | read-write | mandatory | This option is used to set a phone number to place a DBU call. |
| 1.3.6.1.4.1.664.2.147.10.21 | ScalaradTSUIQDBUPhoneNumber5 | read-write | mandatory | This option is used to set a phone number to place a DBU call. |
| 1.3.6.1.4.1.664.2.147.10.22 | ScalaradTSUIQDBUISDNSwitch | read-write | mandatory | This option is used to select the ISDN switch type. |
| 1.3.6.1.4.1.664.2.147.10.23 | ScalaradTSUIQDBUISDNBChannelRate | read-write | mandatory | This option is used to select the ISDN channel rate. |
| 1.3.6.1.4.1.664.2.147.10.24 | ScalaradTSUIQDBUISDNBChannelCount | read-write | mandatory | This option is used to select the number ISDN channels to use. |
| 1.3.6.1.4.1.664.2.147.10.25 | ScalaradTSUIQDBUISDNSPID1 | read-write | mandatory | This option is used to set the SPID for the ISDN interface. |
| 1.3.6.1.4.1.664.2.147.10.26 | ScalaradTSUIQDBUISDNSPID2 | read-write | mandatory | This option is used to set the SPID for the ISDN interface. |
| 1.3.6.1.4.1.664.2.147.10.27 | ScalaradTSUIQDBUISDNLDN1 | read-write | mandatory | This option is used to set LDN for the ISDN interface. |
| 1.3.6.1.4.1.664.2.147.10.28 | ScalaradTSUIQDBUISDNLDN2 | read-write | mandatory | This option is used to set LDN for the ISDN interface. |
| 1.3.6.1.4.1.664.2.147.10.29 | ScalaradTSUIQV34LineType | read-write | mandatory | This option selects the type of analog phone line. |
| 1.3.6.1.4.1.664.2.147.10.30 | ScalaradTSUIQDCEInterfaceType | read-write | mandatory | This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions. |
| 1.3.6.1.4.1.664.2.147.10.31 | ScalaradTSUIQDCEBitRate | read-write | mandatory | This option is uses for utilization measurement of the DBU port when an external DCE device is used. Set this parameter in KBPS close to the connection rate. |
| 1.3.6.1.4.1.664.2.147.11 | NodeadTSUIQIntDBUStatus | |||
| 1.3.6.1.4.1.664.2.147.11.1 | TableadTSUIQIntDBUStatusTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.11.1.1 | RowadTSUIQIntDBUStatusEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.11.1.1.1 | ColumnadTSUIQIntDBUSlotIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.11.1.1.2 | ColumnadTSUIQIntDBUFramesRx | read-only | mandatory | The number of Frames the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.3 | ColumnadTSUIQIntDBUFramesTx | read-only | mandatory | The number of Frames the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.4 | ColumnadTSUIQIntDBUBytesRx | read-only | mandatory | The number of Bytes the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.5 | ColumnadTSUIQIntDBUBytesTx | read-only | mandatory | The number of Bytes the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.6 | ColumnadTSUIQIntDBUAvgThruputTx | read-only | mandatory | The Average Throughput the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.7 | ColumnadTSUIQIntDBUAvgThruputRx | read-only | mandatory | The Average Throughput the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.8 | ColumnadTSUIQIntDBUMaxThruputTx | read-only | mandatory | The Maximum Throughput the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.9 | ColumnadTSUIQIntDBUMaxThruputRx | read-only | mandatory | The Maximum Throughput the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.10 | ColumnadTSUIQIntDBUAvgUtilizationTx | read-only | mandatory | The Average Utilization the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.11 | ColumnadTSUIQIntDBUAvgUtilizationRx | read-only | mandatory | The Average Utilization the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.12 | ColumnadTSUIQIntDBUMaxUtilizationTx | read-only | mandatory | The Maximum Utilization the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.13 | ColumnadTSUIQIntDBUMaxUtilizationRx | read-only | mandatory | The Maximum Utilization the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.11.1.1.14 | ColumnadTSUIQIntTimeInDBU | read-only | mandatory | Time in seconds the DBU port was active. |
| 1.3.6.1.4.1.664.2.147.11.1.1.15 | ColumnadTSUIQIntDBUCrcErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.664.2.147.11.1.1.16 | ColumnadTSUIQIntDBUAbortFrames | read-only | mandatory | Number of frames received without proper flag termination. |
| 1.3.6.1.4.1.664.2.147.11.1.1.17 | ColumnadTSUIQIntDBUOctectViolations | read-only | mandatory | Number of frames received with a bit count not divisible by eigth. |
| 1.3.6.1.4.1.664.2.147.11.1.1.18 | ColumnadTSUIQIntDBUDiscardFrames | read-only | mandatory | Number of frames discarded by the IQ unit |
| 1.3.6.1.4.1.664.2.147.11.1.1.19 | ColumnadTSUIQIntDBULengthErrors | read-only | mandatory | Number of frames received that is less than 5 bytes or greater than 4500 bytes. |
| 1.3.6.1.4.1.664.2.147.11.1.1.20 | ColumnadTSUIQIntDBUEncapsulationErrors | read-only | mandatory | Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA. |
| 1.3.6.1.4.1.664.2.147.11.1.1.21 | ColumnadTSUIQIntDBUUnroutable | read-only | mandatory | Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address. |
| 1.3.6.1.4.1.664.2.147.12 | NodeadTSUIQDayDBUStatus | |||
| 1.3.6.1.4.1.664.2.147.12.1 | TableadTSUIQDayDBUStatusTable | not-accessible | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.12.1.1 | RowadTSUIQDayDBUStatusEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.12.1.1.1 | ColumnadTSUIQDayDBUSlotIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.12.1.1.2 | ColumnadTSUIQDayDBUFramesRx | read-only | mandatory | The number of Frames the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.3 | ColumnadTSUIQDayDBUFramesTx | read-only | mandatory | The number of Frames the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.4 | ColumnadTSUIQDayDBUBytesRx | read-only | mandatory | The number of Bytes the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.5 | ColumnadTSUIQDayDBUBytesTx | read-only | mandatory | The number of Bytes the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.6 | ColumnadTSUIQDayDBUAvgThruputTx | read-only | mandatory | The Average Throughput the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.7 | ColumnadTSUIQDayDBUAvgThruputRx | read-only | mandatory | The Average Throughput the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.8 | ColumnadTSUIQDayDBUMaxThruputTx | read-only | mandatory | The Maximum Throughput the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.9 | ColumnadTSUIQDayDBUMaxThruputRx | read-only | mandatory | The Maximum Throughput the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.10 | ColumnadTSUIQDayDBUAvgUtilizationTx | read-only | mandatory | The Average Utilization the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.11 | ColumnadTSUIQDayDBUAvgUtilizationRx | read-only | mandatory | The Average Utilization the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.12 | ColumnadTSUIQDayDBUMaxUtilizationTx | read-only | mandatory | The Maximum Utilization the Port transmitted for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.13 | ColumnadTSUIQDayDBUMaxUtilizationRx | read-only | mandatory | The Maximum Utilization the Port received for the interval. |
| 1.3.6.1.4.1.664.2.147.12.1.1.14 | ColumnadTSUIQDayTimeInDBU | read-only | mandatory | Time in seconds the DBU port was active. |
| 1.3.6.1.4.1.664.2.147.12.1.1.15 | ColumnadTSUIQDayDBUCrcErrors | read-only | mandatory | Number of frames received with CRC errors. |
| 1.3.6.1.4.1.664.2.147.12.1.1.16 | ColumnadTSUIQDayDBUAbortFrames | read-only | mandatory | Number of frames received without proper flag termination. |
| 1.3.6.1.4.1.664.2.147.12.1.1.17 | ColumnadTSUIQDayDBUOctectViolations | read-only | mandatory | Number of frames received with a bit count not divisible by eigth. |
| 1.3.6.1.4.1.664.2.147.12.1.1.18 | ColumnadTSUIQDayDBUDiscardFrames | read-only | mandatory | Number of frames discarded by the IQ unit |
| 1.3.6.1.4.1.664.2.147.12.1.1.19 | ColumnadTSUIQDayDBULengthErrors | read-only | mandatory | Number of frames received that is less than 5 bytes or greater than 4500 bytes. |
| 1.3.6.1.4.1.664.2.147.12.1.1.20 | ColumnadTSUIQDayDBUEncapsulationErrors | read-only | mandatory | Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA. |
| 1.3.6.1.4.1.664.2.147.12.1.1.21 | ColumnadTSUIQDayDBUUnroutable | read-only | mandatory | Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address. |
| 1.3.6.1.4.1.664.2.147.13 | NodeadTSUIQTrapManager | |||
| 1.3.6.1.4.1.664.2.147.13.1 | TableadTSUIQTrapManagerTable | not-accessible | mandatory | The trap manger route table. |
| 1.3.6.1.4.1.664.2.147.13.1.1 | RowadTSUIQTrapManagerEntry | not-accessible | mandatory | n/a |
| 1.3.6.1.4.1.664.2.147.13.1.1.1 | ColumnadTSUIQTrapManagerRouteIndex | read-only | mandatory | n/a. |
| 1.3.6.1.4.1.664.2.147.13.1.1.2 | ColumnadTSUIQTrapManagerRouteIPAddress | read-write | mandatory | Sets the Trap Manager IP Address. |
| 1.3.6.1.4.1.664.2.147.13.1.1.3 | ColumnadTSUIQTrapManagerRouteDLCI | read-write | mandatory | Sets the Trap Manager DLCI. (Range 16 - 1007). |
| 1.3.6.1.4.1.664.2.147.13.1.1.4 | ColumnadTSUIQTrapManagerRoutePort | read-write | mandatory | Selects the Trap Manager Port. |