ADTX-RAID-AVCL-S2-MIB
64 objects
The MIB module for the ADTX Virtual Console for L Series.
Imported Objects
| ADTX-SMI-S2 | adtx avc |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2653.3.1.1 | Identityavcl | The MIB module for the ADTX Virtual Console for L Series. | ||
| 1.3.6.1.4.1.2653.3.1.1.0 | IdentityavclEvents | current | The events for AVC-L as detected by the daemon. | |
| 1.3.6.1.4.1.2653.3.1.1.0.1 | NotificationdaemonEvent | current | This trap is sent if SNMP notification is enabled for any or all of the critical (needs troubleshooting) events described at 'avclEventInfo' above. There are o… | |
| 1.3.6.1.4.1.2653.3.1.1.1 | ScalaravclVersion | read-only | current | The software version of AVC-L basing on the Daemon as the data gathered is based on it. eg. '4.0 (for AVC-L 4.0)' |
| 1.3.6.1.4.1.2653.3.1.1.2 | ScalaravclOS | read-only | current | The Operating System of where the AVC-L Daemon resides. eg. 'Windows 2000 (Service Pack 3)' |
| 1.3.6.1.4.1.2653.3.1.1.3 | ScalaravclHost | read-only | current | The IP address or hostname of the system where the AVC-L daemon resides. eg. '172.16.16.204' |
| 1.3.6.1.4.1.2653.3.1.1.4 | ScalaravclNumOfDevices | read-only | current | The number of L devices that the AVC-L Daemon is currently connected. eg. 2 |
| 1.3.6.1.4.1.2653.3.1.1.5 | ScalaravclEventInfo | read-only | current | This object will show the most recently sent 'critical' event or trap. Events/Traps can be sent by the AVC-L Daemon if SNMP notification is enabled in the Daem… |
| 1.3.6.1.4.1.2653.3.1.1.6 | TableavclDeviceInformationTable | not-accessible | current | This group (table) provides information about the L devices that are currently connected to the AVC-L Daemon |
| 1.3.6.1.4.1.2653.3.1.1.6.1 | RowavclDeviceInformationEntry | not-accessible | current | |
| 1.3.6.1.4.1.2653.3.1.1.6.1.1 | ColumnavclDeviceIndex | read-only | current | The index number of the L Device pertaining to this table. eg. 1 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.2 | ColumnavclDeviceIP | read-only | current | IP address of the specific L device queried eg. '172.16.16.190' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.3 | ColumnavclDeviceSystemVersion | read-only | current | The device's subsystem version. eg. '7.2' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.4 | ColumnavclDeviceManufacturer | read-only | current | The device's manufacturer name from the Inquiry command info eg. 'ADTX' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.5 | ColumnavclDeviceProductName | read-only | current | The device's product name from the Inquiry command info eg. 'AXRR-L' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.6 | ColumnavclDeviceRevisionLevel | read-only | current | The revision level of the device controller's microcode/firmware from the Inquiry command info. eg. 'L25X' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.7 | ColumnavclDeviceSerialNumber | read-only | current | The device's serial number from the Inquiry command info. eg. 'S000023' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.8 | ColumnavclDeviceDate | read-only | current | The controller's system date of the L device. eg. 'Mar 7, 2003' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.9 | ColumnavclDeviceTime | read-only | current | The controller's system time of the L device, in 24-hr format. eg. '14:35' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.10 | ColumnavclDeviceAssignedSpare | read-only | current | The device's global spare assignment. Can be any of the ff.: - No Assigned Spare - (numerical value in string) eg. 'No Assigned Spare' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.11 | ColumnavclDeviceInitiatorMode | read-only | current | Shows if the device is in Initiator mode or not. Can be any of the ff.: - Enabled - Disabled eg. 'Disabled' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.12 | ColumnavclDeviceInstantCopyLicense | read-only | current | Shows the license description for device Instant Copy. Can be any of the ff.: - Permanent Instant Copy - Temporary Instant Copy (# of days remaining) - No Lice… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.13 | ColumnavclDeviceMirroringLicense | read-only | current | Shows the license description for device Mirroring. Can be any of the ff.: - Permanent Mirroring - Temporary Mirroring (# of days remaining) - No License eg. '… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.14 | ColumnavclDeviceWWNInfoCount | read-only | current | The count/number of WWN Information present in the device. eg. 1 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.15 | ColumnavclDeviceWWNInfo | read-only | current | All WWN Information present in the device. First Controller WWN Information to be returned is that of Primary Controller, followed by Secondary Controller, and… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.16 | ColumnavclDeviceSurfaceSchedMode | read-only | current | The mode for the scheduled surface check. Can be one of the ff: Type: - No Surface Verify - Sequential Verify - Parity Check - Parity Re-Generation Frequency: … |
| 1.3.6.1.4.1.2653.3.1.1.6.1.17 | ColumnavclDeviceSurfaceSchedTime | read-only | current | The time for the scheduled surface check. Can be any of the ff. description: - null or the value is the zero-length string if there is no surface check or if a… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.18 | ColumnavclDeviceSurfaceVerifyDuration | read-only | current | The duration of the scheduled surface check, in minutes. eg. 30 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.19 | ColumnavclDeviceICSourceLU | read-only | current | The number of the source LU of the IC (Instant Copy) operation. eg. 1 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.20 | ColumnavclDeviceICTargetLU | read-only | current | The number of the target LU of the Instant Copy operation. eg. 2 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.21 | ColumnavclDeviceICFlag | read-only | current | This Instant Copy flag/status can be one of the ff.: - Stopped - Started - Copy to External Device - Copy From External Device - Instant Copy In Progress - Fai… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.22 | ColumnavclDeviceICProgress | read-only | current | This will contain the progress of the instant copy operation, in percent. eg. 99 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.23 | ColumnavclDeviceICPairWWN | read-only | current | The worldwide node of the instant copy pair. eg. '50:03:07:A8:0A:00:01:13' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.24 | ColumnavclDeviceRegHostCount | read-only | current | The count of all registered hosts present in the device. eg. 2 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.25 | ColumnavclDeviceRegHosts | read-only | current | Information of all registered hosts present in the device. Information includes: - Host x WWN, i.e. 50:03:07:A8:0A:00:01:13 - L Port Number: 0 (for Fibre Chann… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.26 | ColumnavclDeviceLuToMirrorCount | read-only | current | The count of all LU�s to mirror. eg. 3 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.27 | ColumnavclDeviceLunsToMirror | read-only | current | Information of all Luns to mirror. Includes: - Source Lun - Target Lun - L Port Number: 0 (for FC port 0) or 1 (for FC port 1) - Target WWN e.g. 'LU1, LU3, 0, … |
| 1.3.6.1.4.1.2653.3.1.1.6.1.28 | ColumnavclDeviceRaidGrpCount | read-only | current | The count of all RAID groups or arrays configured in any device. eg. 2 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.29 | ColumnavclDeviceRaidGrpsState | read-only | current | Contains the state of each raid group present in the device. Can be one of the following: - Normal mode - Degraded mode - Reconstruction mode - Retry mode - Sy… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.30 | ColumnavclDeviceRaidGrpsDriveCount | read-only | current | The number of drives included in each raid group. e.g. 'Array 1: 5; Array 2: 3; ......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.31 | ColumnavclDeviceRaidGrpsSize | read-only | current | Contains the size of each raid group. Size is in units of KB. e.g. 'Array 1: 645,620,224; Array 2: 300,000,000; ......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.32 | ColumnavclDeviceRaidGrpsLuUnderSurfaceVerify | read-only | current | Contains the volume or LU number of all raid groups that is currently undergoing surface verify. Display only the raid groups that are undergoing this feature.… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.33 | ColumnavclDeviceRaidGrpsSurfaceVerifyProgress | read-only | current | Contains the progress, in percentage, of all raid groups undergoing surface verify. Display only the raid groups that are undergoing this feature. If no raid g… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.34 | ColumnavclDeviceRaidGrpsInitReconProgress | read-only | current | Contains the progress, in percentage, of the initialization or reconstruction for all raid groups undergoing such process. e.g. 'Array 1: 17; Array 3: 85; ....… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.35 | ColumnavclDeviceRaidGrpsFreeSpace | read-only | current | Contains the total free space of all raid groups, in units of KB. e.g. 'Array 1: 5,000,000; Array 2: 0; ......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.36 | ColumnavclDeviceSpareCount | read-only | current | The count of all spare drives in any device. eg. 1 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.37 | ColumnavclDeviceSparesState | read-only | current | Contains the state of each spare drive present in the device. Can be one of the following: - On Line - Off Line - Not Configured - Working Properly - Failed or… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.38 | ColumnavclDeviceSparesRaidGrpNumber | read-only | current | Shows the raid group number to which the spare belongs. value is 'Global' if the spare is global or does not belong to any raid group. e.g. 'Spare 1: 3; Spare … |
| 1.3.6.1.4.1.2653.3.1.1.6.1.39 | ColumnavclDeviceVolumeCount | read-only | current | The count of all volumes present in any device. Maximum number of volumes configurable is 32. Volume/LU number starts at 0. eg. 4 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.40 | ColumnavclDeviceVolumesState | read-only | current | Contains the state of volumes present in the device. Can be one of the following: - Initialization Completed - Required - Initialization In Progress - LUN Fail… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.41 | ColumnavclDeviceVolumesRaidGrpNumber | read-only | current | Shows the raid group number to which the volume belongs. e.g. 'LU 1: 2; LU 2: 2; LU 3: 1;......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.42 | ColumnavclDeviceVolumesRaidLevel | read-only | current | Shows the raid level the volume is configured. Can be any of the following: 0 - RAID 0 1 - RAID 1 5 - RAID 5 e.g. 'LU 1: 0; LU 2: 0; LU 3: 5;......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.43 | ColumnavclDeviceVolumesSize | read-only | current | Shows the size of all volumes in the device, in units of KB. e.g. 'LU 1: 1,500,000; LU 2: 7,000,000; LU 3: 15,000,000;......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.44 | ColumnavclDeviceVolumesInitProgress | read-only | current | Contains the progress, in percentage, of the initialization or reconstruction for all volumes undergoing such process. e.g. 'LU 1: 1; LU 2: 89; LU 3: 64;......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.45 | ColumnavclDeviceVolumesNickname | read-only | current | Contains the nickname or mount point of each volume in a device. If no nickname, the value is the zero-length string. e.g. 'LU 1: /mnt/device/sda; LU 2: ; LU 3… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.46 | ColumnavclDeviceDriveCount | read-only | current | The count of all drives present in any device. Maximum number of drives is 15, but can be 30 if there is an expansion. eg. 15 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.47 | ColumnavclDeviceDrivesState | read-only | current | Contains the state of the drives present in the device. Can be one of the following: - On Line - Off Line - Spare - Not Configured - Working Properly - Failed … |
| 1.3.6.1.4.1.2653.3.1.1.6.1.48 | ColumnavclDeviceDrivesUsageType | read-only | current | The usage type of the drive in the device. Can be one of the ff.: - In Array - Not Assigned - As Spare - HDD does not exist e.g. 'Drive 1: As Spare; Drive 2: N… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.49 | ColumnavclDeviceDrivesRaidGrpOrSpareNumber | read-only | current | The raid group or spare number this drive belongs. If this is 'Not Assigned' or 'HDD does not exist', the value is the zero-length string. e.g. 'Drive 1: Spare… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.50 | ColumnavclDeviceComponentCount | read-only | current | The count of all components present in any device. eg. 3 |
| 1.3.6.1.4.1.2653.3.1.1.6.1.51 | ColumnavclDeviceComponentsType | read-only | current | The usage type of the component in the device. Can be one of the ff.: - Power Supply - Fan e.g. 'Component 1: Power Supply; Component 2: Fan; ......' |
| 1.3.6.1.4.1.2653.3.1.1.6.1.52 | ColumnavclDeviceComponentsState | read-only | current | Contains the state of the components present in the device. Can be one of the following: - Normal - Fail - Not Available e.g. 'Component 1: Normal; Component 2… |
| 1.3.6.1.4.1.2653.3.1.1.6.1.53 | ColumnavclDeviceComponentsInstanceNumber | read-only | current | The index number of each unique component device type. Format of values are: PS1 - Power Supply 1 F2 - Fan 2 e.g. 'Component 1: PS1; Component 2: F2; ......' |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AvcLongString | OCTET STRING (SIZE(0..10000)) |