MIB Viewer

ADVANTECH-EKI-PRONEER-MIB

1333 objects
The MIB module is for Advantech switch, e.g. EKI-XXXX, etc. Copyright (C) Advantech iConnectivity Group(2014).
Imported Objects
SNMPv2-CONFOBJECT-GROUP
SNMPv2-SMICounter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime DisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.10297IdentityadvantechThe MIB module is for Advantech switch, e.g. EKI-XXXX, etc. Copyright (C) Advantech iConnectivity Group(2014).
1.3.6.1.4.1.10297.202NodeaSwitchMIB
1.3.6.1.4.1.10297.202.7000Nodeproneer
1.3.6.1.4.1.10297.202.7000.1Nodemonitoring
1.3.6.1.4.1.10297.202.7000.1.1NodedeviceInfo
1.3.6.1.4.1.10297.202.7000.1.1.1ScalarsystemNameread-writecurrentSystem name of the switch
1.3.6.1.4.1.10297.202.7000.1.1.2ScalarsystemLocationread-writecurrentSystem location of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.3ScalarsystemContactread-writecurrentSystem contact of the switch
1.3.6.1.4.1.10297.202.7000.1.1.4ScalarmacAddressread-onlycurrentMAC address of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.5ScalaripAddressread-onlycurrentIP address of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.6ScalarsubnetMaskread-onlycurrentSubnet mask of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.7Scalargatewayread-onlycurrentDefault gateway of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.8ScalarloaderVersionread-onlycurrentBoot loader version of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.9ScalarloaderDateread-onlycurrentBoot loader date of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.10ScalarfirmwareVersionread-onlycurrentFirmware version of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.11ScalarfirmwareDateread-onlycurrentFirmware release date of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.12ScalarsystemObjectIDread-onlycurrentSNMP system object ID of the switch.
1.3.6.1.4.1.10297.202.7000.1.1.13ScalarsystemUpTimeread-onlycurrentThe time since the switch was last re-initialized.
1.3.6.1.4.1.10297.202.7000.1.1.14NodeledStatus
1.3.6.1.4.1.10297.202.7000.1.1.14.1ScalarledSYSStatusread-onlycurrentThe LED status of system operating.
1.3.6.1.4.1.10297.202.7000.1.1.14.2ScalarledRMStatusread-onlycurrentThe LED status of ring master.
1.3.6.1.4.1.10297.202.7000.1.1.14.3ScalarledPWR1Statusread-onlycurrentThe LED status of power input 1.
1.3.6.1.4.1.10297.202.7000.1.1.14.4ScalarledPWR2Statusread-onlycurrentThe LED status of power input 2.
1.3.6.1.4.1.10297.202.7000.1.1.14.5ScalarledAlarmStatusread-onlycurrentThe LED status of alarm.
1.3.6.1.4.1.10297.202.7000.1.1.14.6ScalarledPFAILStatusread-onlycurrentThe LED status of P-Fail.
1.3.6.1.4.1.10297.202.7000.1.1.14.7ScalarledRFAILStatusread-onlycurrentThe LED status of R-Fail.
1.3.6.1.4.1.10297.202.7000.1.1.14.8ScalarledLOOPStatusread-onlycurrentThe LED status of loop detection.
1.3.6.1.4.1.10297.202.7000.1.1.14.9ScalarledTempStatusread-onlycurrentThe LED status of system temperature.
1.3.6.1.4.1.10297.202.7000.1.1.15ScalarbuildVersionread-onlycurrentBuild version of the switch.
1.3.6.1.4.1.10297.202.7000.1.2NodeloggingMessage
1.3.6.1.4.1.10297.202.7000.1.2.1TableloggingBufferTablenot-accessiblecurrentThe table of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1.1RowloggingBufferEntrynot-accessiblecurrentThe entry of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1.1.1ColumnloggingBufferIndexnot-accessiblecurrentThe index of the logging buffer
1.3.6.1.4.1.10297.202.7000.1.2.1.1.2ColumnloggingBufferSeverityread-onlycurrentThe severity of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.3ColumnloggingBufferCategoryread-onlycurrentThe category of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.4ColumnloggingBufferTimeStampread-onlycurrentThe time stamp of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.1.1.5ColumnloggingBufferMessageread-onlycurrentThe messge of the logging buffer.
1.3.6.1.4.1.10297.202.7000.1.2.2ScalarclearBufferedMsgread-writecurrentDelete the logging message in buffer.
1.3.6.1.4.1.10297.202.7000.1.2.3TableloggingFileTablenot-accessiblecurrentThe table of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1RowloggingFileEntrynot-accessiblecurrentThe entry of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.1ColumnloggingFileIndexnot-accessiblecurrentThe index of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.2ColumnloggingFileSeverityread-onlycurrentThe severity of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.3ColumnloggingFileCategoryread-onlycurrentThe category of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.4ColumnloggingFileTimeStampread-onlycurrentThe time stamp of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.3.1.5ColumnloggingFileMessageread-onlycurrentThe message of the logging file
1.3.6.1.4.1.10297.202.7000.1.2.4ScalarclearFileMsgread-writecurrentDelete the logging message in file.
1.3.6.1.4.1.10297.202.7000.1.3NodeportMonitoring
1.3.6.1.4.1.10297.202.7000.1.3.1TableportStatisticTablenot-accessiblecurrentThe table of the RMON counters.
1.3.6.1.4.1.10297.202.7000.1.3.1.1RowportStatisticEntrynot-accessiblecurrentThe entry of the RMON counters.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.1ColumnportStatisticIndexread-onlycurrentThe port index of the port counters.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.2ColumnportCounterClearread-writecurrentClear the port counter.
1.3.6.1.4.1.10297.202.7000.1.3.1.1.3ColumnifInOctetsread-onlycurrentThe total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.4ColumnifInUcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.5ColumnifInNUcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.6ColumnifInDiscardsread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.7ColumnifOutOctetsread-onlycurrentThe total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.8ColumnifOutUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.9ColumnifOutNUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.10ColumnifOutDiscardsread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.11ColumnifInMulticastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.12ColumnifInBroadcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in t…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.13ColumnifOutMulticastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including …
1.3.6.1.4.1.10297.202.7000.1.3.1.1.14ColumnifOutBroadcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including …
1.3.6.1.4.1.10297.202.7000.1.3.1.1.15Columndot3StatsAlignmentErrorsread-onlycurrentA count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.16Columndot3StatsFCSErrorsread-onlycurrentA count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.17Columndot3StatsSingleCollisionFramesread-onlycurrentA count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.18Columndot3StatsMultipleCollisionFramesread-onlycurrentA count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this ob…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.19Columndot3StatsDeferredTransmissionsread-onlycurrentA count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.20Columndot3StatsLateCollisionsread-onlycurrentThe number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision includ…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.21Columndot3StatsExcessiveCollisionsread-onlycurrentA count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is ope…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.22Columndot3StatsFrameTooLongsread-onlycurrentA count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.23Columndot3StatsSymbolErrorsread-onlycurrentFor an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.24Columndot3ControlInUnknownOpcodesread-onlycurrentA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.25Columndot3InPauseFramesread-onlycurrentA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is o…
1.3.6.1.4.1.10297.202.7000.1.3.1.1.26Columndot3OutPauseFramesread-onlycurrentA count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface i…
1.3.6.1.4.1.10297.202.7000.1.4NodelinkAggregation
1.3.6.1.4.1.10297.202.7000.1.4.1TablelagStatusTablenot-accessiblecurrentThe table of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1.1RowlagStatusEntrynot-accessiblecurrentThe entry of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1.1.1ColumnlagStatusIndexread-onlycurrentThe name of the link aggregation group
1.3.6.1.4.1.10297.202.7000.1.4.1.1.2ColumnlagStatusNameread-onlycurrentThe LAG port description
1.3.6.1.4.1.10297.202.7000.1.4.1.1.3ColumnlagStatusTyperead-onlycurrentThe type of the LAG. Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candid…
1.3.6.1.4.1.10297.202.7000.1.4.1.1.4ColumnlagStatusLinkStateread-onlycurrentLAG port link status
1.3.6.1.4.1.10297.202.7000.1.4.1.1.5ColumnlagStatusActiveMemberread-onlycurrentActive member ports of the LAG
1.3.6.1.4.1.10297.202.7000.1.4.1.1.6ColumnlagStatusStandbyMemberread-onlycurrentInactive or candudate member ports of the LAG
1.3.6.1.4.1.10297.202.7000.1.4.2TablelacpInfoTablenot-accessiblecurrentThe table of LACP
1.3.6.1.4.1.10297.202.7000.1.4.2.1RowlacpInfoEntrynot-accessiblecurrentThe entry of LACP
1.3.6.1.4.1.10297.202.7000.1.4.2.1.1ColumnlacpInfoLagIndexread-onlycurrentThe LACP name
1.3.6.1.4.1.10297.202.7000.1.4.2.1.2ColumnlacpInfoPortIndexread-onlycurrentMember port name
1.3.6.1.4.1.10297.202.7000.1.4.2.1.3ColumnlacpInfoPartnerSysIdread-onlycurrentThe system ID of link partner.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.4ColumnlacpInfoPnkeyread-onlycurrentPort key of partner
1.3.6.1.4.1.10297.202.7000.1.4.2.1.5ColumnlacpInfoAtkeyread-onlycurrentPort key of actor
1.3.6.1.4.1.10297.202.7000.1.4.2.1.6ColumnlacpInfoSelread-onlycurrentLACP selection logic status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.7ColumnlacpInfoMuxread-onlycurrentLACP mux state machine status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.8ColumnlacpInfoReceivread-onlycurrentLACP receive state machine status of the port
1.3.6.1.4.1.10297.202.7000.1.4.2.1.9ColumnlacpInfoPrdtxread-onlycurrentLACP periodic transmission state machine status of the port.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.10ColumnlacpInfoAtstatread-onlycurrentThe actor state field of LACP PDU description.
1.3.6.1.4.1.10297.202.7000.1.4.2.1.11ColumnlacpInfoPnstatread-onlycurrentThe partner state field of LACP PDU description.
1.3.6.1.4.1.10297.202.7000.1.5NodelldpStatistics
1.3.6.1.4.1.10297.202.7000.1.5.1ScalarlldpClearStatisticsread-writecurrentClear the LLDP statistics
1.3.6.1.4.1.10297.202.7000.1.5.2Scalarinertionsread-onlycurrentThe number of times the complete set of infomation advertised by a partcular MAC Service Access Point(MSAP) has been inserted into tables associated with the r…
1.3.6.1.4.1.10297.202.7000.1.5.3Scalardeletionsread-onlycurrentThe number of times the complete set of infomation advertised by MSAP has been deleted from tables associated with the remote systems
1.3.6.1.4.1.10297.202.7000.1.5.4Scalardropsread-onlycurrentThe number of times the complete set of information advertised by MSAP could not be entered into tables associated with the remote systems because of insuffici…
1.3.6.1.4.1.10297.202.7000.1.5.5Scalarageoutsread-onlycurrentThe number of times the complete set of information advertised by MSAP has been deleted from tables associated with the remote systems because the information …
1.3.6.1.4.1.10297.202.7000.1.5.6TablelldpPortStatisticsTablenot-accessiblecurrentThe table of LLDP port statistics
1.3.6.1.4.1.10297.202.7000.1.5.6.1RowlldpPortStatisticsEntrynot-accessiblecurrentThe entry of LLDP port statistics
1.3.6.1.4.1.10297.202.7000.1.5.6.1.1ColumnlldpPortStatIndexread-onlycurrentInterface or port number.
1.3.6.1.4.1.10297.202.7000.1.5.6.1.2ColumnlldpPortStatTotalTxFrameread-onlycurrentNumber of LLDP frames transmitted on the corresponding port.
1.3.6.1.4.1.10297.202.7000.1.5.6.1.3ColumnlldpPortStatTotalRxFrameread-onlycurrentNumber of LLDP frames received by this LLDP agent on the corresponding port, while the LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.4ColumnlldpPortStatDiscardRxFrameread-onlycurrentNumber of LLDP frames discard for any reason by this LLDP agent on the corresponding port
1.3.6.1.4.1.10297.202.7000.1.5.6.1.5ColumnlldpPortStatErrorRxFrameread-onlycurrentNumber of invalid LLDP frames received by the LLDP agent on the corresponding port, while the LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.6ColumnlldpPortStatDiscardRxTlvread-onlycurrentNumber of TLVs LLDP frames discard for any reason by this LLDP agent on the corresponding port
1.3.6.1.4.1.10297.202.7000.1.5.6.1.7ColumnlldpPortStatUnrecognizedRxTlvread-onlycurrentNumber of TLVs LLDP frames that are unrecognized while this LLDP agent is enabled
1.3.6.1.4.1.10297.202.7000.1.5.6.1.8ColumnlldpPortStatTotalRxAgeoutsread-onlycurrentNumber of age out LLDP frames
1.3.6.1.4.1.10297.202.7000.1.6NodeigmpStatistics
1.3.6.1.4.1.10297.202.7000.1.6.1ScalartotalRxread-onlycurrentIGMP snooping total Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.2ScalarvalidRxread-onlycurrentIGMP snooping valid Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.3ScalarinvalidRxread-onlycurrentIGMP snooping invalid Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.4ScalarotherRxread-onlycurrentIGMP snooping other Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.5ScalarleaveRxread-onlycurrentIGMP snooping leave Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.6ScalarreportRxread-onlycurrentIGMP snooping report Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.7ScalargeneralQueryRxread-onlycurrentIGMP snooping general query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.8ScalarspecialGroupQueryRxread-onlycurrentIGMP snooping special group query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.9ScalarspecialGroupSourceQueryRxread-onlycurrentIGMP snooping special group source query Rx counter
1.3.6.1.4.1.10297.202.7000.1.6.10ScalarleaveTxread-onlycurrentIGMP snooping leave Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.11ScalarreportTxread-onlycurrentIGMP snooping report Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.12ScalargeneralQueryTxread-onlycurrentIGMP snooping general query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.13ScalarspecialGroupQueryTxread-onlycurrentIGMP snooping special group query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.14ScalarspecialGroupSourceQueryTxread-onlycurrentIGMP snooping special group source query Tx counter
1.3.6.1.4.1.10297.202.7000.1.6.15ScalarclearigmpStatisticsread-writecurrentClear IGMP snooping statistics counter
1.3.6.1.4.1.10297.202.7000.1.7NodemldStatistics
1.3.6.1.4.1.10297.202.7000.1.7.1ScalarmldtotalRxread-onlycurrentMLD total Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.2ScalarmldvalidRxread-onlycurrentMLD valid Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.3ScalarmldinvalidRxread-onlycurrentMLD invalid Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.4ScalarmldotherRxread-onlycurrentMLD other Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.5ScalarmldleaveRxread-onlycurrentMLD leave Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.6ScalarmldreportRxread-onlycurrentMLD report Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.7ScalarmldgeneralQueryRxread-onlycurrentMLD general query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.8ScalarmldspecialGroupQueryRxread-onlycurrentMLD special group query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.9ScalarmldspecialGroupSourceQueryRxread-onlycurrentMLD special group source query Rx counter
1.3.6.1.4.1.10297.202.7000.1.7.10ScalarmldleaveTxread-onlycurrentMLD leave Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.11ScalarmldreportTxread-onlycurrentMLD report Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.12ScalarmldgeneralQueryTxread-onlycurrentMLD general query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.13ScalarmldspecialGroupQueryTxread-onlycurrentMLD special group query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.14ScalarmldspecialGroupSourceQueryTxread-onlycurrentMLD special group source query Tx counter
1.3.6.1.4.1.10297.202.7000.1.7.15ScalarclearmldStatisticsread-writecurrentClear MLD statistics counter
1.3.6.1.4.1.10297.202.7000.2Nodesystem
1.3.6.1.4.1.10297.202.7000.2.1NodeipSettings
1.3.6.1.4.1.10297.202.7000.2.1.1Scalaripv4Moderead-writecurrentthe mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
1.3.6.1.4.1.10297.202.7000.2.1.2Scalaripv4Addressread-writecurrentIf static mode is enabled, enter IP address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.3Scalaripv4SubnetMaskread-writecurrentIf static mode is enabled, enter subnet mask in this field.
1.3.6.1.4.1.10297.202.7000.2.1.4Scalaripv4Gatewayread-writecurrentIf static mode is enabled, enter gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.5Scalaripv4DnsServer1read-writecurrentIf static mode is enabled, enter primary DNS server address in this field
1.3.6.1.4.1.10297.202.7000.2.1.6Scalaripv4DnsServer2read-writecurrentIf static mode is enabled, enter secondary DNS server address in this field
1.3.6.1.4.1.10297.202.7000.2.1.7TableinterfaceIpv4Tablenot-accessiblecurrentThe table of interface IP address
1.3.6.1.4.1.10297.202.7000.2.1.7.1RowinterfaceIpv4Entrynot-accessiblecurrentThe entry of interface IP address
1.3.6.1.4.1.10297.202.7000.2.1.7.1.1ColumninterfaceIpv4Indexread-onlycurrentThe index of interface IPv4 table
1.3.6.1.4.1.10297.202.7000.2.1.7.1.2ColumninterfaceIpv4Vlanread-onlycurrentThe VLAN ID of interface IPv4 table
1.3.6.1.4.1.10297.202.7000.2.1.7.1.3ColumninterfaceIpv4Moderead-writecurrentthe mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.4ColumninterfaceIpv4Addressread-writecurrentIf static mode is enabled, enter IP address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.5ColumninterfaceIpv4SubnetMaskread-writecurrentIf static mode is enabled, enter subnet mask in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.6ColumninterfaceIpv4Gatewayread-writecurrentIf static mode is enabled, enter gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.7ColumninterCurrIpv4DhcpStateread-onlycurrentThe current status of IPv4 DHCP.
1.3.6.1.4.1.10297.202.7000.2.1.7.1.8ColumninterCurrIpv4Addressread-onlycurrentThe current IPv4 address
1.3.6.1.4.1.10297.202.7000.2.1.7.1.9ColumninterCurrIpv4SubnetMaskread-onlycurrentThe current IPv4 subnet mask
1.3.6.1.4.1.10297.202.7000.2.1.7.1.10ColumninterCurrIpv4Gatewayread-onlycurrentThe current IPv4 gateway.
1.3.6.1.4.1.10297.202.7000.2.2Nodeipv6Settings
1.3.6.1.4.1.10297.202.7000.2.2.1ScalarautoConfigurationread-writecurrentIPv6 Auto Configuration state.
1.3.6.1.4.1.10297.202.7000.2.2.2Scalaripv6Addressread-writecurrentIf auto configuration mode is disabled, enter IPv6 address in this field.
1.3.6.1.4.1.10297.202.7000.2.2.3Scalaripv6SubnetMaskread-writecurrentIf auto configuration mode is disabled, enter IPv6 submask in this field.
1.3.6.1.4.1.10297.202.7000.2.2.4Scalaripv6Gatewayread-writecurrentIf auto configuration mode is disabled, enter IPv6 gateway address in this field.
1.3.6.1.4.1.10297.202.7000.2.2.5Scalardhcpv6Clientread-writecurrentDHCPv6 client state
1.3.6.1.4.1.10297.202.7000.2.2.6Tableipv6InUseTablenot-accessiblecurrentThe table of in-use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6.1Rowipv6InUseEntrynot-accessiblecurrentThe entry of in-use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6.1.1Columnipv6InUseIndexread-onlycurrentThe current use IPv6 submask
1.3.6.1.4.1.10297.202.7000.2.2.6.1.2Columnipv6InUseAddressread-onlycurrentThe current use IPv6 address
1.3.6.1.4.1.10297.202.7000.2.2.6.1.3Columnipv6InUseSubnetMaskread-onlycurrentThe current use IPv6 submask
1.3.6.1.4.1.10297.202.7000.2.2.7Scalaripv6InUseRouterread-onlycurrentThe current use IPv6 router address
1.3.6.1.4.1.10297.202.7000.2.2.8Scalardhcpv6DUIDread-onlycurrentThe DHCPv6 DUID
1.3.6.1.4.1.10297.202.7000.2.2.9Scalardhcpv6IPAddressread-onlycurrentThe DHCPv6 IP address
1.3.6.1.4.1.10297.202.7000.2.3ScalarmanagementVlanread-writecurrentThis allows the entry of a VLAN from which a management station will be allowed to manage the device using TCP/IP (in-band via web manager or Telnet). Manageme…
1.3.6.1.4.1.10297.202.7000.2.4NodesystemTime
1.3.6.1.4.1.10297.202.7000.2.4.1NodesystemTimeSetting
1.3.6.1.4.1.10297.202.7000.2.4.1.1ScalarenableSNTPread-writecurrentenable or disable using SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.1.2NodemanualTime
1.3.6.1.4.1.10297.202.7000.2.4.1.2.1Scalaryearread-writecurrentThe year of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.2Scalarmonthread-writecurrentThe month of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.3Scalardayread-writecurrentThe day of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.4Scalarhoursread-writecurrentThe hour of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.5Scalarminutesread-writecurrentThe minutes of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.2.6Scalarsecondsread-writecurrentThe second of the switch
1.3.6.1.4.1.10297.202.7000.2.4.1.3ScalartimeZoneread-writecurrentThe UTC Timezone of the switch.
1.3.6.1.4.1.10297.202.7000.2.4.1.4ScalardaylightSavingread-writecurrentthe mode of daylight saving time. Disable: Disable daylight saving time. Recurring: Using recurring mode of daylight saving time Non-Recurring: Using non-recur…
1.3.6.1.4.1.10297.202.7000.2.4.1.5ScalardaylightSavingOffsetread-writecurrentSpecify the adjust offset of daylight saving time
1.3.6.1.4.1.10297.202.7000.2.4.1.6NoderecurringFrom
1.3.6.1.4.1.10297.202.7000.2.4.1.6.1ScalarrecFromDayread-writecurrentThe starting day of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.2ScalarrecFromWeekread-writecurrentThe starting week of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.3ScalarrecFromMonthread-writecurrentThe starting month of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.4ScalarrecFromHoursread-writecurrentThe starting hour of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.6.5ScalarrecFromMinutesread-writecurrentThe starting minutes of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7NoderecurringTo
1.3.6.1.4.1.10297.202.7000.2.4.1.7.1ScalarrecToDayread-writecurrentThe ending day of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.2ScalarrecToWeekread-writecurrentThe ending week of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.3ScalarrecToMonthread-writecurrentThe ending month of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.4ScalarrecToHoursread-writecurrentThe ending hour of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.7.5ScalarrecToMinutesread-writecurrentThe ending minute of recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8NodenonRecurringFrom
1.3.6.1.4.1.10297.202.7000.2.4.1.8.1ScalarnonRecFromYearread-writecurrentThe starting year of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.2ScalarnonRecFromMonthread-writecurrentThe starting month of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.3ScalarnonRecFromDayread-writecurrentThe starting day of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.4ScalarnonRecFromHoursread-writecurrentThe starting hour of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.8.5ScalarnonRecFromMinutesread-writecurrentThe starting minute of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9NodenonRecurringTo
1.3.6.1.4.1.10297.202.7000.2.4.1.9.1ScalarnonRecToYearread-writecurrentThe ending year of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.2ScalarnonRecToMonthread-writecurrentThe ending month of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.3ScalarnonRecToDayread-writecurrentThe ending day of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.4ScalarnonRecToHoursread-writecurrentThe ending hour of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.9.5ScalarnonRecToMinutesread-writecurrentThe ending minute of non-recurring daylight saving time.
1.3.6.1.4.1.10297.202.7000.2.4.1.10ScalarserverAddressread-writecurrentIP address or hostname of time server
1.3.6.1.4.1.10297.202.7000.2.4.1.11ScalarserverPortread-writecurrentTime server port number
1.3.6.1.4.1.10297.202.7000.2.4.1.12ScalarsystemTimeStatusread-writecurrentIf user set system time with SNMP, the value sould not apply to switch. They need to set active(1) to apply into switch
1.3.6.1.4.1.10297.202.7000.2.4.2NodesystemTimeInfo
1.3.6.1.4.1.10297.202.7000.2.4.2.1ScalarcurrentDateTimeread-onlycurrentCurrent Date and Time on the device.
1.3.6.1.4.1.10297.202.7000.2.4.2.2ScalarcurrentSNTPread-onlycurrentThe status of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.3ScalarcurrentSNTPServerAddrread-onlycurrentThe IP address or hostname of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.4ScalarcurrentSNTPServerPortread-onlycurrentThe port number of SNTP server.
1.3.6.1.4.1.10297.202.7000.2.4.2.5ScalarcurrentTimeZoneread-onlycurrent
1.3.6.1.4.1.10297.202.7000.2.4.2.6ScalarcurrentDaylightSavingStatusread-onlycurrent
1.3.6.1.4.1.10297.202.7000.2.4.2.7ScalarcurrentDaylightSavingOffsetread-onlycurrent
1.3.6.1.4.1.10297.202.7000.2.4.2.8ScalarcurrentDaylightSavingFromread-onlycurrent
1.3.6.1.4.1.10297.202.7000.2.4.2.9ScalarcurrentDaylightSavingToread-onlycurrent
1.3.6.1.4.1.10297.202.7000.2.5Nodesfp
1.3.6.1.4.1.10297.202.7000.2.5.1TablesfpSerialInfoTablenot-accessiblecurrentThe table of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1.1RowsfpSerialInfoEntrynot-accessiblecurrentThe entry of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1.1.1ColumnsfpPortIndexread-onlycurrentThe index of SFP serial info.
1.3.6.1.4.1.10297.202.7000.2.5.1.1.2ColumnsfpConnectorread-onlycurrentThe SFP connector
1.3.6.1.4.1.10297.202.7000.2.5.1.1.3ColumnsfpSpeedread-onlycurrentThe SFP speed
1.3.6.1.4.1.10297.202.7000.2.5.1.1.4ColumnsfpVendorNameread-onlycurrentThe SFP vender name
1.3.6.1.4.1.10297.202.7000.2.5.1.1.6ColumnsfpVendorPnread-onlycurrentThe SFP vendor product number
1.3.6.1.4.1.10297.202.7000.2.5.1.1.7ColumnspfVendorRevread-onlycurrentThe SFP vender revision
1.3.6.1.4.1.10297.202.7000.2.5.1.1.8ColumnsfpVendorSnread-onlycurrentThe SFP vendor serial number
1.3.6.1.4.1.10297.202.7000.2.5.1.1.9ColumnsfpDateCoderead-onlycurrentThe SFP data code
1.3.6.1.4.1.10297.202.7000.2.5.2TablesfpDMIInfoTablenot-accessiblecurrentThe table of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2.1RowsfpDMIInfoEntrynot-accessiblecurrentThe entry of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2.1.1ColumnsfpDMIPortIndexread-onlycurrentThe index of SFP DMI info.
1.3.6.1.4.1.10297.202.7000.2.5.2.1.2ColumnsfpDMITemperatureread-onlycurrentThe SFP DMI temperature
1.3.6.1.4.1.10297.202.7000.2.5.2.1.3ColumnsfpDMIVoltageread-onlycurrentThe SFP DMI voltage
1.3.6.1.4.1.10297.202.7000.2.5.2.1.4ColumnsfpDMITxBiasread-onlycurrentThe SFP DMI Tx bias
1.3.6.1.4.1.10297.202.7000.2.5.2.1.5ColumnsfpDMITxPowerread-onlycurrentThe SFP DMI Tx power
1.3.6.1.4.1.10297.202.7000.2.5.2.1.6ColumnsfpDMIRxPowerread-onlycurrentThe SFP DMI Rx power
1.3.6.1.4.1.10297.202.7000.2.5.3ScalarddmDiagnosticAlarmread-writecurrentThe DDM diagnostic alarm setting
1.3.6.1.4.1.10297.202.7000.2.5.4TablesfpDMIAlarmInfoTablenot-accessiblecurrentThe table of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4.1RowsfpDMIAlarmInfoEntrynot-accessiblecurrentThe entry of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4.1.1ColumnsfpDMIAlarmPortIndexread-onlycurrentThe index of SFP DMI alarm info.
1.3.6.1.4.1.10297.202.7000.2.5.4.1.2ColumnsfpDMITempHighAlarmStateread-writecurrentThe state of SFP DMI temperature high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.3ColumnsfpDMITempHighAlarmValueread-writecurrentThe value of SFP DMI temperature high alarm. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.4ColumnsfpDMITempHighWarnStateread-writecurrentThe state of SFP DMI temperature high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.5ColumnsfpDMITempHighWarnValueread-writecurrentThe value of SFP DMI temperature high warning. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.6ColumnsfpDMITempLowAlarmStateread-writecurrentThe state of SFP DMI temperature low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.7ColumnsfpDMITempLowAlarmValueread-writecurrentThe value of SFP DMI temperature low alarm. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.8ColumnsfpDMITempLowWarnStateread-writecurrentThe state of SFP DMI temperature low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.9ColumnsfpDMITempLowWarnValueread-writecurrentThe value of SFP DMI temperature low warning. The value range is 127 Degrees C ~ -127 Degrees C
1.3.6.1.4.1.10297.202.7000.2.5.4.1.10ColumnsfpDMIVoltageHighAlarmStateread-writecurrentThe state of SFP DMI voltage high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.11ColumnsfpDMIVoltageHighAlarmValueread-writecurrentThe value of SFP DMI voltage high alarm. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.12ColumnsfpDMIVoltageHighWarnStateread-writecurrentThe state of SFP DMI voltage high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.13ColumnsfpDMIVoltageHighWarnValueread-writecurrentThe value of SFP DMI voltage high warning. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.14ColumnsfpDMIVoltageLowAlarmStateread-writecurrentThe state of SFP DMI voltage low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.15ColumnsfpDMIVoltageLowAlarmValueread-writecurrentThe value of SFP DMI voltage low alarm. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.16ColumnsfpDMIVoltageLowWarnStateread-writecurrentThe state of SFP DMI voltage low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.17ColumnsfpDMIVoltageLowWarnValueread-writecurrentThe value of SFP DMI voltage low warning. The value range is 0.001~6V
1.3.6.1.4.1.10297.202.7000.2.5.4.1.18ColumnsfpDMITxBasisHighAlarmStateread-writecurrentThe state of SFP DMI TX Basis high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.19ColumnsfpDMITxBasisHighAlarmValueread-writecurrentThe value of SFP DMI TX Basis high alarm. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.20ColumnsfpDMITxBasisHighWarnStateread-writecurrentThe state of SFP DMI TX Basis high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.21ColumnsfpDMITxBasisHighWarnValueread-writecurrentThe value of SFP DMI TX Basis high warning. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.22ColumnsfpDMITxBasisLowAlarmStateread-writecurrentThe state of SFP DMI TX Basis low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.23ColumnsfpDMITxBasisLowAlarmValueread-writecurrentThe value of SFP DMI TX Basis low alarm. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.24ColumnsfpDMITxBasisLowWarnStateread-writecurrentThe state of SFP DMI TX Basis low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.25ColumnsfpDMITxBasisLowWarnValueread-writecurrentThe value of SFP DMI TX Basis low warning. The value range is 1~131mA
1.3.6.1.4.1.10297.202.7000.2.5.4.1.26ColumnsfpDMITxPowerHighAlarmStateread-writecurrentThe state of SFP DMI TX power high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.27ColumnsfpDMITxPowerHighAlarmValueread-writecurrentThe value of SFP DMI TX power high alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.28ColumnsfpDMITxPowerHighWarnStateread-writecurrentThe state of SFP DMI TX power high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.29ColumnsfpDMITxPowerHighWarnValueread-writecurrentThe value of SFP DMI TX power high warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.30ColumnsfpDMITxPowerLowAlarmStateread-writecurrentThe state of SFP DMI TX power low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.31ColumnsfpDMITxPowerLowAlarmValueread-writecurrentThe value of SFP DMI TX power low alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.32ColumnsfpDMITxPowerLowWarnStateread-writecurrentThe state of SFP DMI TX power low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.33ColumnsfpDMITxPowerLowWarnValueread-writecurrentThe value of SFP DMI TX power low warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.34ColumnsfpDMIRxPowerHighAlarmStateread-writecurrentThe state of SFP DMI RX power high alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.35ColumnsfpDMIRxPowerHighAlarmValueread-writecurrentThe value of SFP DMI RX power high alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.36ColumnsfpDMIRxPowerHighWarnStateread-writecurrentThe state of SFP DMI RX power high warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.37ColumnsfpDMIRxPowerHighWarnValueread-writecurrentThe value of SFP DMI RX power high warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.38ColumnsfpDMIRxPowerLowAlarmStateread-writecurrentThe state of SFP DMI RX power low alarm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.39ColumnsfpDMIRxPowerLowAlarmValueread-writecurrentThe value of SFP DMI RX power low alarm. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.5.4.1.40ColumnsfpDMIRxPowerLowWarnStateread-writecurrentThe state of SFP DMI RX power low warning
1.3.6.1.4.1.10297.202.7000.2.5.4.1.41ColumnsfpDMIRxPowerLowWarnValueread-writecurrentThe value of SFP DMI RX power low warning. The value range is 8~-39dbm
1.3.6.1.4.1.10297.202.7000.2.6NodedhcpClientOpt82
1.3.6.1.4.1.10297.202.7000.2.6.1ScalardhcpClientOpt82Statusread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.2ScalardhcpClientOpt82CircuitIDFormatread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.3ScalardhcpClientOpt82CircuitIDStringread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.4ScalardhcpClientOpt82CircuitIDHexread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.5ScalardhcpClientOpt82CircuitIDUserDefineread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.6ScalardhcpClientOpt82RemoteIDFormatread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.7ScalardhcpClientOpt82RemoteIDStringread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.8ScalardhcpClientOpt82RemoteIDHexread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.6.9ScalardhcpClientOpt82RemoteIDUserDefineread-writecurrent
1.3.6.1.4.1.10297.202.7000.2.7NodenetworkPort
1.3.6.1.4.1.10297.202.7000.2.7.1ScalarhttpNetworkPortread-writecurrentThe network port of http.
1.3.6.1.4.1.10297.202.7000.2.7.2ScalarhttpsNetworkPortread-writecurrentThe network port of https.
1.3.6.1.4.1.10297.202.7000.2.7.3ScalartelnetNetworkPortread-writecurrentThe network port of telnet.
1.3.6.1.4.1.10297.202.7000.2.7.4ScalarsshNetworkPortread-writecurrentThe network port of ssh.
1.3.6.1.4.1.10297.202.7000.3Nodel2switching
1.3.6.1.4.1.10297.202.7000.3.1NodeportSetting
1.3.6.1.4.1.10297.202.7000.3.1.1TableportSettingTablenot-accessiblecurrentThe table of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1.1RowportSettingEntrynot-accessiblecurrentThe entry of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1.1.1ColumnportSettingIndexread-onlycurrentThe index of port setting.
1.3.6.1.4.1.10297.202.7000.3.1.1.1.2Columndescriptionread-writecurrentPort description
1.3.6.1.4.1.10297.202.7000.3.1.1.1.3ColumnenableStateread-writecurrentPort admin state
1.3.6.1.4.1.10297.202.7000.3.1.1.1.4ColumnlinkStatusread-onlycurrentPort link status
1.3.6.1.4.1.10297.202.7000.3.1.1.1.5Columnspeedread-writecurrentPort speed capabilities
1.3.6.1.4.1.10297.202.7000.3.1.1.1.6Columnduplexread-writecurrentPort duplex capabilities
1.3.6.1.4.1.10297.202.7000.3.1.1.1.7ColumnflowControlConfigread-writecurrentPort flow control setting
1.3.6.1.4.1.10297.202.7000.3.1.1.1.8ColumnflowControlStatusread-onlycurrentPort flow control status
1.3.6.1.4.1.10297.202.7000.3.2Nodemirror
1.3.6.1.4.1.10297.202.7000.3.2.1TablemirrorTablenot-accessiblecurrentThe table of mirror funciton
1.3.6.1.4.1.10297.202.7000.3.2.1.1RowmirrorEntrynot-accessiblecurrentThe entry of mirror funciton
1.3.6.1.4.1.10297.202.7000.3.2.1.1.1ColumnsessionIdread-onlycurrentMirror session ID
1.3.6.1.4.1.10297.202.7000.3.2.1.1.2ColumnmonitorSessionStateread-writecurrentMirror session state
1.3.6.1.4.1.10297.202.7000.3.2.1.1.3ColumndestinationPortread-writecurrentMirror session destination port
1.3.6.1.4.1.10297.202.7000.3.2.1.1.4ColumningressStateread-writecurrentDestination port ingress state
1.3.6.1.4.1.10297.202.7000.3.2.1.1.5ColumnsourceTxPortread-writecurrentMirror session source tx ports only select portbased-enabled state.
1.3.6.1.4.1.10297.202.7000.3.2.1.1.6ColumnsourceRxPortread-writecurrentMirror session source rx ports only select portbased-enabled state
1.3.6.1.4.1.10297.202.7000.3.3Nodelag
1.3.6.1.4.1.10297.202.7000.3.3.1ScalarloadBalanceAlgorithmread-writecurrentLAG load balance distribution algorithm. MAC Address: Based on source and destination MAC address for all packets IP/MAC Address: Based on source and destinati…
1.3.6.1.4.1.10297.202.7000.3.3.2TablelagManagementTablenot-accessiblecurrentThe table of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2.1RowlagManagementEntrynot-accessiblecurrentThe entry of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2.1.1ColumnlagIndexread-onlycurrentThe index of LAG management
1.3.6.1.4.1.10297.202.7000.3.3.2.1.2ColumnlagNameread-writecurrentLAG port name
1.3.6.1.4.1.10297.202.7000.3.3.2.1.3ColumnlagTyperead-writecurrentthe type of the LAG Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candida…
1.3.6.1.4.1.10297.202.7000.3.3.2.1.4ColumnlagPortsread-writecurrentthe trunk member ports in this field
1.3.6.1.4.1.10297.202.7000.3.3.2.1.5ColumnlagLinkStateread-onlycurrentLAG port link status
1.3.6.1.4.1.10297.202.7000.3.3.2.1.6ColumnlagActiveMemberread-onlycurrentActive member ports of the LAG
1.3.6.1.4.1.10297.202.7000.3.3.2.1.7ColumnlagStandbyMemberread-onlycurrentInactive or candidate member ports of the LAG
1.3.6.1.4.1.10297.202.7000.3.3.3TablelagPortTablenot-accessiblecurrentThe table of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1RowlagPortEntrynot-accessiblecurrentThe entry of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1.1ColumnlagPortIndexread-onlycurrentThe index of LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1.2ColumnlagPortDescriptionread-onlycurrentThe description of the LAG port
1.3.6.1.4.1.10297.202.7000.3.3.3.1.3ColumnlagPortTyperead-onlycurrentMember port media type
1.3.6.1.4.1.10297.202.7000.3.3.3.1.4ColumnlagPortEnableStateread-writecurrentLAG port admin state
1.3.6.1.4.1.10297.202.7000.3.3.3.1.5ColumnlagPortLinkStatusread-onlycurrentLAG port link status
1.3.6.1.4.1.10297.202.7000.3.3.3.1.6ColumnlagPortSpeedread-writecurrentCurrent LAG port speed
1.3.6.1.4.1.10297.202.7000.3.3.3.1.7ColumnlagPortDuplexread-onlycurrentCurrent LAG port duplex
1.3.6.1.4.1.10297.202.7000.3.3.3.1.8ColumnlagPortFlowCtrlConfigread-writecurrentLAG port flow control configuration
1.3.6.1.4.1.10297.202.7000.3.3.3.1.9ColumnlagPortFlowCtrlStatusread-onlycurrentCurrent LAG port flow control state
1.3.6.1.4.1.10297.202.7000.3.3.4ScalarlacpSystemPriorityread-writecurrentConfigure the system priority of LACP
1.3.6.1.4.1.10297.202.7000.3.3.5TablelacpPortTablenot-accessiblecurrentThe table of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5.1RowlacpPortEntrynot-accessiblecurrentThe entry of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.1ColumnlacpPortIndexread-onlycurrentThe index of LACP Port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.2ColumnlacpPriorityread-writecurrentLACP priority of the port
1.3.6.1.4.1.10297.202.7000.3.3.5.1.3ColumnlacpTimeoutread-writecurrentThe periodic transmissions of LACP PDUs Long: Transmit LACP PDU with slow periodic (30s). Short: Transmit LACPP DU with fast periodic (1s).
1.3.6.1.4.1.10297.202.7000.3.3.5.1.4ColumnlacpPortModeread-writecurrentLACP mode of the port
1.3.6.1.4.1.10297.202.7000.3.4Nodevlan
1.3.6.1.4.1.10297.202.7000.3.4.1TablevlanTablenot-accessiblecurrentThe table of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1.1RowvlanEntrynot-accessiblecurrentThe entry of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1.1.1ColumnvlanIndexread-writecurrentThe index of VLAN
1.3.6.1.4.1.10297.202.7000.3.4.1.1.2ColumnvlanIdread-writecurrentThe VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.1.1.3ColumnvlanNamePrefixread-writecurrentThe prefix string of the VLAN name
1.3.6.1.4.1.10297.202.7000.3.4.1.1.4ColumnvlanTyperead-onlycurrentThe VLAN type
1.3.6.1.4.1.10297.202.7000.3.4.1.1.99ColumnvlanRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.4.2TablevlanInterfaceTablenot-accessiblecurrentThe table of the VLN inetrface
1.3.6.1.4.1.10297.202.7000.3.4.2.1RowvlanInterfaceEntrynot-accessiblecurrentThe entry of the VLN inetrface
1.3.6.1.4.1.10297.202.7000.3.4.2.1.1ColumnvlanPortIndexread-onlycurrentThe port index of the VLAN interface
1.3.6.1.4.1.10297.202.7000.3.4.2.1.2ColumnvlanInterfaceVlanModeread-onlycurrentVLAN mode for the interface. Hybrid: support all functions as defined in IEEE 802.1Q Access: Accepts only untagged frames and join an untagged VLAN Trunk: An u…
1.3.6.1.4.1.10297.202.7000.3.4.2.1.3ColumnvlanPvidread-writecurrentThe port-based VLAN ID, It only available with Hybrid and Trunk mode.
1.3.6.1.4.1.10297.202.7000.3.4.2.1.4ColumnvlanAcceptedTyperead-writecurrentthe acceptable-frame-type of the specified interfaces. It is only available with Hybrid mode.
1.3.6.1.4.1.10297.202.7000.3.4.2.1.5ColumnvlanIngressFilteringread-writecurrentthe status of ingress filtering. It is only available with Hybrid mode.
1.3.6.1.4.1.10297.202.7000.3.4.3TableportToVlanTablenot-accessiblecurrentThe table of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1RowportToVlanEntrynot-accessiblecurrentThe entry of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1.1ColumnportToVlanVlanIndexread-onlycurrentThe index of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1.2ColumnportToVlanPortIndexread-onlycurrentThe port index of Port to VLAN
1.3.6.1.4.1.10297.202.7000.3.4.3.1.3ColumnportToVlanVlanIdread-onlycurrentVLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.3.1.4ColumnportToVlanInterfaceVlanModeread-onlycurrentDisplay the interface VLAN mode of this port
1.3.6.1.4.1.10297.202.7000.3.4.3.1.5ColumnportToVlanMembershipread-writecurrentthe membership for this port with the specified VLAN ID. Forbidden: Specify the port is forbidden in the VLAN. Excluded: Specify the port is excluded in the VL…
1.3.6.1.4.1.10297.202.7000.3.4.3.1.6ColumnportToVlanPvidread-onlycurrentthe VLAN ID to be the port-based VLAN ID for this port.
1.3.6.1.4.1.10297.202.7000.3.4.4TableportVlanTablenot-accessiblecurrentThe table of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4.1RowportVlanEntrynot-accessiblecurrentThe entry of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4.1.1ColumnportVlanPortIndexread-onlycurrentThe port index of port VLAN
1.3.6.1.4.1.10297.202.7000.3.4.4.1.2ColumnportVlanPortModeread-onlycurrentthe interface VLAN mode of this port
1.3.6.1.4.1.10297.202.7000.3.4.4.1.3ColumnportVlanAdminVlansread-onlycurrentthe administrative VLAN list of this port
1.3.6.1.4.1.10297.202.7000.3.4.4.1.4ColumnportVlanOperVlansread-onlycurrentThe operational VLAN list of this port
1.3.6.1.4.1.10297.202.7000.3.4.5NodevoiceVlan
1.3.6.1.4.1.10297.202.7000.3.4.5.1ScalarvoiceVlanStateread-writecurrentVoice VLAN state
1.3.6.1.4.1.10297.202.7000.3.4.5.2ScalarvoiceVlanIdread-writecurrentVoice VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.5.3ScalarvoiceVlanRemarkCos-8021pread-writecurrenta value of vpt that will be advertised by LLDP-MED
1.3.6.1.4.1.10297.202.7000.3.4.5.4ScalarvoiceVlanRemark1qread-writecurrent1p remark state
1.3.6.1.4.1.10297.202.7000.3.4.5.5ScalarvoiceVlanAgingTimeread-writecurrentvalue of aging time
1.3.6.1.4.1.10297.202.7000.3.4.5.6TabletelephonyOUITablenot-accessiblecurrentThe table of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1RowtelephonyOUIEntrynot-accessiblecurrentThe entry of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.1ColumntelephonyOUIIndexread-onlycurrentThe index of OUI
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.2ColumntelephonyOUIAddressread-writecurrentoui address
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.3ColumntelephonyOUIDescriptionread-writecurrentdescription of the specified MAC address to the voice VLAN OUI table
1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.99ColumntelephonyOUIRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.4.5.7TabletelephonyOUIPortTablenot-accessiblecurrentThe table of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1RowtelephonyOUIPortEntrynot-accessiblecurrentThe entry of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.1ColumntelephonyOUIPortIndexread-onlycurrentThe port index of OUI port
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.2ColumntelephonyOUIStateread-writecurrentIngress/Egress type value
1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.3ColumntelephonyOUICosModeread-writecurrentport cos mode Src: QoS attributes are applied to packets with OUIs in the source MAC address. All: QoS attributes are applied to packets that are classified to…
1.3.6.1.4.1.10297.202.7000.3.4.6TableinterfaceVlanTablenot-accessiblecurrentThe table of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1RowinterfaceVlanEntrynot-accessiblecurrentThe entry of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1.1ColumninterfaceVlanIndexread-writecurrentThe index of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1.2ColumninterfaceVlanIdread-writecurrentThe interface VLAN ID
1.3.6.1.4.1.10297.202.7000.3.4.6.1.3ColumninterfaceVlanNameread-onlycurrentThe name of interface VLAN
1.3.6.1.4.1.10297.202.7000.3.4.6.1.99ColumninterfaceVlanRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.5Nodeeee
1.3.6.1.4.1.10297.202.7000.3.5.1TableeeePortTablenot-accessiblecurrentThe table of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1.1RoweeePortEntrynot-accessiblecurrentThe entry of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1.1.1ColumneeePortIndexread-onlycurrentThe port index of EEE Port
1.3.6.1.4.1.10297.202.7000.3.5.1.1.2ColumneeeStateread-writecurrentPort EEE function.
1.3.6.1.4.1.10297.202.7000.3.6Nodemulticast
1.3.6.1.4.1.10297.202.7000.3.6.1ScalarunknownMulticastActionread-writecurrentthe unknown multicast action Drop: drop the unknown multicast data. Flood: flood the unknown multicast data. Router port: forward the unknown multicast data to…
1.3.6.1.4.1.10297.202.7000.3.6.2ScalarforwardMethodread-onlycurrentthe multicast forward method. MAC: forward method dmac+vid.
1.3.6.1.4.1.10297.202.7000.3.6.3NodeigmpSnooping
1.3.6.1.4.1.10297.202.7000.3.6.3.1ScalarigmpSnoopingStateread-writecurrentthe enabling status of IGMP functionality
1.3.6.1.4.1.10297.202.7000.3.6.3.2ScalarigmpSnoopingVersionread-writecurrentthe igmp snooping version v2: Only support process igmp v2 packet. v3: Support v3 basic and v2.
1.3.6.1.4.1.10297.202.7000.3.6.3.3ScalarigmpSnoopingReportSuppressionread-writecurrentthe enabling status of IGMP v2 report suppression
1.3.6.1.4.1.10297.202.7000.3.6.3.4TableigmpSnoopingTablenot-accessiblecurrentThe table of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1RowigmpSnoopingEntrynot-accessiblecurrentThe entry of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.1ColumnigmpSnoopingIndexread-onlycurrentThe index of IGMP snooping
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.2ColumnigmpSnoopingVlanIdread-onlycurrentThe IGMP entry VLAN ID
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.3ColumnigmpSnoopStatusread-writecurrentThe enable status of IGMP VLAN functionality
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.4ColumnrouterPortsAutoLearnread-writecurrentThe enable statue of IGMP router port learning.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.5ColumnqueryRobustnessread-writecurrentThe Robusstness Variable allows tuning for the expected packet loss on a subnet
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.6ColumnqueryIntervalread-writecurrentThe interval of querier send general query
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.7ColumnqueryMaxResponseIntervalread-writecurrentIn Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.8ColumnlastMemberQueryCounterread-writecurrentThe count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.9ColumnlastMemberQueryIntervalread-writecurrentThe interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.10ColumnimmediateLeaveread-writecurrentLeave the group when receive IGMP Leave message.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.11ColumnoperQueryRobustnessread-onlycurrentThe operation query robustness.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.12ColumnoperQueryIntervalread-onlycurrentThe operation query interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.13ColumnoperQueryMaxResponseIntervalread-onlycurrentThe operating query max response interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.14ColumnoperLastMemberQueryCounterread-onlycurrentThe operating last member query counter.
1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.15ColumnoperLastMemberQueryIntervalread-onlycurrentThe operation last member query interval.
1.3.6.1.4.1.10297.202.7000.3.6.3.5TableigmpQuerierTablenot-accessiblecurrentThe table of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1RowigmpQuerierEntrynot-accessiblecurrentThe entry of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.1ColumnigmpQuerierVlanIdread-onlycurrentThe VLAN ID of IGMP querier
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.2ColumnigmpQuerierStateread-writecurrentThe enabling status of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.3ColumnigmpQuerierStatusread-onlycurrentThe enabling status of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.4ColumnigmpQuerierVersionread-writecurrentThe query version of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.5ColumnigmpQuerierIPread-onlycurrentThe query IP address of IGMP Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.3.6TableigmpStaticGroupTablenot-accessiblecurrentThe table of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1RowigmpStaticGroupEntrynot-accessiblecurrentThe entry of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.1ColumnigmpStaticGroupIndexread-onlycurrentThe index of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.2ColumnigmpStaticGroupVlanIdread-writecurrentThe VLAN ID of IGMP static group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.3ColumnigmpStaticGroupIPaddressread-writecurrentThe IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.4ColumnigmpStaticGroupMemberPortsread-writecurrentThe member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.99ColumnigmpStaticGroupRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.6.3.7TableigmpGroupTablenot-accessiblecurrentThe table of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1RowigmpGroupEntrynot-accessiblecurrentThe entry of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.1ColumnigmpGroupVlanIdread-onlycurrentThe VLAN ID of IGMP group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.2ColumnigmpGroupIPaddressread-onlycurrentThe group IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.3ColumnigmpGroupMemberPortsread-onlycurrentThe member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.4ColumnigmpGroupTyperead-onlycurrentThe type of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.5ColumnigmpGroupLiferead-onlycurrentThe life time of this group
1.3.6.1.4.1.10297.202.7000.3.6.3.8TableigmpRouterTablenot-accessiblecurrentThe table of IGMP router
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1RowigmpRouterEntrynot-accessiblecurrentThe entry of IGMP router
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.1ColumnigmpRouterVlanIdread-onlycurrentThe VLAN ID of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.2ColumnigmpRouterPortread-onlycurrentThe port of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.3ColumnigmpRouterExpireTimeread-onlycurrentThe expire time of the IGMP router.
1.3.6.1.4.1.10297.202.7000.3.6.4NodemldSnooping
1.3.6.1.4.1.10297.202.7000.3.6.4.1ScalarmldSnoopingStateread-writecurrentthe enabling status of MLD functionality
1.3.6.1.4.1.10297.202.7000.3.6.4.2ScalarmldSnoopingVersionread-writecurrentthe MLD snooping version
1.3.6.1.4.1.10297.202.7000.3.6.4.3ScalarmldSnoopingReportSuppressionread-writecurrentthe enabling status of MLD report suppression
1.3.6.1.4.1.10297.202.7000.3.6.4.4TablemldSnoopingTablenot-accessiblecurrentThe table of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1RowmldSnoopingEntrynot-accessiblecurrentThe entry of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.1ColumnmldSnoopingIndexread-onlycurrentThe index of MLD snooping
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.2ColumnmldSnoopingVlanIdread-onlycurrentThe MLD entry VLAN ID
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.3ColumnmldSnoopStatusread-writecurrentThe enable status of MLD VLAN functionality
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.4ColumnmldSnoopRouterPortsAutoLearnread-writecurrentThe enable statue of MLD router port learning.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.5ColumnmldSnoopQueryRobustnessread-writecurrentThe Robusstness Variable allows tuning for the expected packet loss on a subnet
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.6ColumnmldSnoopQueryIntervalread-writecurrentThe interval of querier send general query
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.7ColumnmldSnoopQueryMaxResponseIntervalread-writecurrentIn Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.8ColumnmldSnoopLastMemberQueryCounterread-writecurrentThe count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.9ColumnmldSnoopLastMemberQueryIntervalread-writecurrentThe interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.10ColumnmldSnoopImmediateLeaveread-writecurrentLeave the group when receive MLD Leave message.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.11ColumnoperMldSnoopQueryRobustnessread-onlycurrentThe operation MLD query robustness.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.12ColumnoperMldSnoopQueryIntervalread-onlycurrentThe operation MLD query interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.13ColumnoperMldSnoopQueryMaxResponseIntervalread-onlycurrentThe operating MLD query max response interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.14ColumnoperMldSnoopLastMemberQueryCounterread-onlycurrentThe operating MLD last member query counter.
1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.15ColumnoperMldSnoopLastMemberQueryIntervalread-onlycurrentThe operation MLD last member query interval.
1.3.6.1.4.1.10297.202.7000.3.6.4.5TablemldQuerierTablenot-accessiblecurrentThe table of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1RowmldQuerierEntrynot-accessiblecurrentThe entry of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.1ColumnmldQuerierVlanIdread-onlycurrentThe VLAN ID of MLD querier
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.2ColumnmldQuerierStateread-writecurrentThe enabling status of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.3ColumnmldQuerierStatusread-onlycurrentThe querier status of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.4ColumnmldQuerierVersionread-writecurrentThe query version of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.5ColumnmldQuerierIPread-onlycurrentThe query IP address of MLD Querier Election on the chose VLANs
1.3.6.1.4.1.10297.202.7000.3.6.4.6TablemldStaticGroupTablenot-accessiblecurrentThe table of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1RowmldStaticGroupEntrynot-accessiblecurrentThe entry of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.1ColumnmldStaticGroupIndexread-onlycurrentThe index of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.2ColumnmldStaticGroupVlanIdread-writecurrentThe VLAN ID of MLD static group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.3ColumnmldStaticGroupIPaddressread-writecurrentThe IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.4ColumnmldStaticGroupMemberPortsread-writecurrentThe member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.99ColumnmldStaticGroupRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.6.4.7TablemldGroupTablenot-accessiblecurrentThe table of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1RowmldGroupEntrynot-accessiblecurrentThe entry of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.1ColumnmldGroupVlanIdread-onlycurrentThe VLAN ID of MLD group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.2ColumnmldGroupIPaddressread-onlycurrentThe group IP address of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.3ColumnmldGroupMemberPortsread-onlycurrentThe member ports of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.4ColumnmldGroupTyperead-onlycurrentThe type of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.5ColumnmldGroupLiferead-onlycurrentThe life time of this group
1.3.6.1.4.1.10297.202.7000.3.6.4.8TablemldRouterTablenot-accessiblecurrentThe table of MLD router
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1RowmldRouterEntrynot-accessiblecurrentThe entry of MLD router
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.1ColumnmldRouterVlanIdread-onlycurrentThe VLAN ID of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.2ColumnmldRouterPortread-onlycurrentThe port of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.3ColumnmldRouterExpireTimeread-onlycurrentThe expire time of the MLD router.
1.3.6.1.4.1.10297.202.7000.3.7NodejamboFrame
1.3.6.1.4.1.10297.202.7000.3.7.1ScalarjamboFramePktSizeread-writecurrentJumbo frame size
1.3.6.1.4.1.10297.202.7000.3.8Nodestp
1.3.6.1.4.1.10297.202.7000.3.8.1ScalarstpEnableread-writecurrentSpecify the STP status to be enable/disable on the switch. Enable STP will block all switch port and SNMP set will timeout.
1.3.6.1.4.1.10297.202.7000.3.8.2ScalarbpduForwardread-writecurrentThe BPDU forwarding action when the global STP is disable
1.3.6.1.4.1.10297.202.7000.3.8.3ScalarpathCostMethodread-writecurrentThe path cost method of STP
1.3.6.1.4.1.10297.202.7000.3.8.4ScalarforceVersionread-writecurrentThe operating mode of STP STP-compatible: IEEE 802.1D STP operation RSTP-Operation: IEEE 802.1W operation
1.3.6.1.4.1.10297.202.7000.3.8.5TablestpPortTablenot-accessiblecurrentThe table of STP port
1.3.6.1.4.1.10297.202.7000.3.8.5.1RowstpPortEntrynot-accessiblecurrentThe entry of STP port
1.3.6.1.4.1.10297.202.7000.3.8.5.1.1ColumnstpPortIndexread-onlycurrentThe port index of STP
1.3.6.1.4.1.10297.202.7000.3.8.5.1.2ColumnstpAdminEnableread-writecurrentenable/disable the STP port state
1.3.6.1.4.1.10297.202.7000.3.8.5.1.3ColumnstpPathCostread-writecurrentthe port is contribution, when it is the Root Port, to the Root Path Cost for the Bridge. (0 means 'Auto')
1.3.6.1.4.1.10297.202.7000.3.8.5.1.4ColumnstpEdgePortread-writecurrentthe edge port configuration: No: Force to false state (as link to a bridge). Yes: Force to true state (as link to a host).
1.3.6.1.4.1.10297.202.7000.3.8.5.1.5ColumnstpP2pMacread-writecurrentthe Point-to-Point port configuration:
1.3.6.1.4.1.10297.202.7000.3.8.5.1.6ColumnstpMigrateread-writecurrentForce to try to use the new MST/RST BPDUs, and hence to test the hypothesis that all legacy systems that do not understand the new BPDU formats have been remov…
1.3.6.1.4.1.10297.202.7000.3.8.6NodestpBridgeInfo
1.3.6.1.4.1.10297.202.7000.3.8.6.1ScalarstpBridgePriorityread-writecurrentthe Bridge Priority in the CIST instance. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 4…
1.3.6.1.4.1.10297.202.7000.3.8.6.2ScalarstpBridgeForwardDelayread-writecurrentthe delay time an interface takes to converge from blocking state to forwarding state. Max Age <= 2*(Forward Delay Time - 1)
1.3.6.1.4.1.10297.202.7000.3.8.6.3ScalarstpBridgeMaxAgeread-writecurrentthe time any switch should wait before trying to change the STP topology after unhearing Hello BPUD. Max Age <= 2*(Forward Delay Time - 1) Max Age >= 2*(Hello …
1.3.6.1.4.1.10297.202.7000.3.8.6.4ScalarstpBridgeTxHoldCountread-writecurrentthe Transmit Hold Count used to limit BPDU transmission rate.
1.3.6.1.4.1.10297.202.7000.3.8.6.5ScalarstpBridgeHelloTimeread-writecurrentthe interval between periodic transmissions of BPDU by Designated Ports. Max Age >= 2*(Hello Time + 1)
1.3.6.1.4.1.10297.202.7000.3.8.7NodestpBridgeStatus
1.3.6.1.4.1.10297.202.7000.3.8.7.1ScalarbridgeIdentifierread-onlycurrentSTP bridge identifier
1.3.6.1.4.1.10297.202.7000.3.8.7.2ScalardefinatedRootBridgeread-onlycurrentSTP destination root bridge ID
1.3.6.1.4.1.10297.202.7000.3.8.7.3ScalarrootPathCostread-onlycurrentSTP root path cost
1.3.6.1.4.1.10297.202.7000.3.8.7.4ScalardesignatedBridgeread-onlycurrentSTP designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.7.5ScalarrootPortread-onlycurrentSTP root port
1.3.6.1.4.1.10297.202.7000.3.8.7.6ScalarlastTopologyChangeread-onlycurrentSTP last topology change
1.3.6.1.4.1.10297.202.7000.3.8.8TablestpPortStatusTablenot-accessiblecurrentThe table of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1RowstpPortStatusEntrynot-accessiblecurrentThe entry of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1.1ColumnstpPortStatusIndexread-onlycurrentThe index of STP port status
1.3.6.1.4.1.10297.202.7000.3.8.8.1.2ColumnstpPortPriorityread-writecurrentThe Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 20…
1.3.6.1.4.1.10297.202.7000.3.8.8.1.3ColumnstpPortPathCostread-onlycurrentPath Cost to the selected ports in the CIST instance. (0 means `Auto`)
1.3.6.1.4.1.10297.202.7000.3.8.8.1.4ColumnstpPortDesignatedRootBridgeread-onlycurrentThe designated root bridge
1.3.6.1.4.1.10297.202.7000.3.8.8.1.5ColumnstpPortRootPathCostread-onlycurrentThe root path cost
1.3.6.1.4.1.10297.202.7000.3.8.8.1.6ColumnstpPortDesignatedBridgeread-onlycurrentThe designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.8.1.7ColumnstpPortEdgrPortConfread-onlycurrentThe edge port configuration
1.3.6.1.4.1.10297.202.7000.3.8.8.1.8ColumnstpPortP2PMacConfread-onlycurrentThe point-to-point MAC configuration
1.3.6.1.4.1.10297.202.7000.3.8.8.1.9ColumnstpPortRolesread-onlycurrentThe port roles
1.3.6.1.4.1.10297.202.7000.3.8.8.1.10ColumnstpPortStatusread-onlycurrentThe port status
1.3.6.1.4.1.10297.202.7000.3.8.9TablestpStatisticTablenot-accessiblecurrentThe table of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9.1RowstpStatisticEntrynot-accessiblecurrentThe entry of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9.1.1ColumnstpStatisticPortIndexread-onlycurrentThe port index of STP statistic
1.3.6.1.4.1.10297.202.7000.3.8.9.1.2ColumnconfigurationBPDUsReceivedread-onlycurrentThe configuration BPDU received
1.3.6.1.4.1.10297.202.7000.3.8.9.1.3ColumntcnBPDUsReceivedread-onlycurrentThe TCN BPDU received
1.3.6.1.4.1.10297.202.7000.3.8.9.1.4ColumnconfigurationBPDUsTransmittedread-onlycurrentThe configuration BPDU transmitted
1.3.6.1.4.1.10297.202.7000.3.8.9.1.5ColumntcnBPDUsTransmittedread-onlycurrentThe TCN BPDU transmitted
1.3.6.1.4.1.10297.202.7000.3.8.10Nodemstp
1.3.6.1.4.1.10297.202.7000.3.8.10.1NodemstConfigIdentification
1.3.6.1.4.1.10297.202.7000.3.8.10.1.1ScalarmstConfigNameread-writecurrentThe configuration name of MSTP
1.3.6.1.4.1.10297.202.7000.3.8.10.1.2ScalarmstRevisionLevelread-writecurrentThe revision level of MSTP
1.3.6.1.4.1.10297.202.7000.3.8.10.2NodemstInstanceID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.1ScalarmstiIDSettingread-writecurrentThe MSTI ID of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.2ScalarmstiVlanListSettingread-writecurrentThe VLAN list of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.3ScalarmstiIDSettingMoveread-writecurrentThe moving action of MST instance ID
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4TablemstiIDInfoTablenot-accessiblecurrentThe table of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1RowmstiIDInfoEntrynot-accessiblecurrentThe entry of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.1ColumnmstiIDIndexread-onlycurrentThe MSTI ID of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.2ColumnmstiVLANListread-onlycurrentThe VLAN List of MST instance ID info
1.3.6.1.4.1.10297.202.7000.3.8.10.3NodestpInstance
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1TablestpPriorityInfoTablenot-accessiblecurrentThe table of STP priority info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1RowstpPriorityInfoEntrynot-accessiblecurrentThe entry of STP priority info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.1ColumnstpMstiIDIndexread-onlycurrentThe MSTI ID of STP instance info
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.2ColumnstpPriorityValueread-writecurrentThe priority of STP instance info. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 5…
1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.3ColumnstpPriorityDefaultread-writecurrentSet the priority to default value.
1.3.6.1.4.1.10297.202.7000.3.8.10.4NodemstInstanceInfo
1.3.6.1.4.1.10297.202.7000.3.8.10.4.1ScalarmstBridgeIdentifierread-onlycurrentSTP bridge identifier in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.2ScalarmstDesignatedRootBridgeread-onlycurrentSTP destination root bridge ID in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.3ScalarmstRootPathCostread-onlycurrentSTP root path cost in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.4ScalarmstDesignatedBridgeread-onlycurrentSTP designated bridge in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.5ScalarmstRootPortread-onlycurrentSTP root port in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.6ScalarmstLastTopologyChangeread-onlycurrentSTP last topology change in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7TablemstStpPortStatusTablenot-accessiblecurrentThe table of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1RowmstStpPortStatusEntrynot-accessiblecurrentThe entry of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.1ColumnmstStpPortStatusIndexread-onlycurrentThe index of STP port status in MST
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.2ColumnmstStpPortPriorityread-onlycurrentThe Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 20…
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.3ColumnmstStpPortPathCostread-onlycurrentPath Cost to the selected ports in the CIST instance. (0 means `Auto`)
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.4ColumnmstStpPortDesignatedRootBridgeread-onlycurrentThe designated root bridge
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.5ColumnmstStpPortRootPathCostread-onlycurrentThe root path cost
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.6ColumnmstStpPortDesignatedBridgeread-onlycurrentThe designated bridge
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.7ColumnmstStpPortEdgrPortConfread-onlycurrentThe edge port configuration
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.8ColumnmstStpPortP2PMacConfread-onlycurrentThe point-to-point MAC configuration
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.9ColumnmstStpPortRolesread-onlycurrentThe port roles
1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.10ColumnmstStpPortStatusread-onlycurrentThe port status
1.3.6.1.4.1.10297.202.7000.3.8.10.4.8ScalarmstInstanceInfoIDread-writecurrentMST instance ID
1.3.6.1.4.1.10297.202.7000.3.9NodeqinqVlan
1.3.6.1.4.1.10297.202.7000.3.9.1ScalarouterVlanEthtyperead-writecurrentQ-in-Q outer VLAN ether type
1.3.6.1.4.1.10297.202.7000.3.9.2TableqinqPortInfoTablenot-accessiblecurrentThe table of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2.1RowqinqPortInfoEntrynot-accessiblecurrentThe entry of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2.1.1ColumnqinqPortIndexread-onlycurrentThe port index of Q-in-Q port info
1.3.6.1.4.1.10297.202.7000.3.9.2.1.2ColumnqinqOuterPVIDread-writecurrentThe Q-in-Q outer PVID
1.3.6.1.4.1.10297.202.7000.3.9.2.1.3ColumnqinqOuterModeread-writecurrentThe Q-in-Q outer mode
1.3.6.1.4.1.10297.202.7000.3.10Nodegarp
1.3.6.1.4.1.10297.202.7000.3.10.1ScalargarpJoinTimeread-writecurrentThe GARP join time. Join time * 2 must be below leave time.
1.3.6.1.4.1.10297.202.7000.3.10.2ScalargarpLeaveTimeread-writecurrentThe GARP leave time. The leave time must below leave all time and bigger then Join time * 2
1.3.6.1.4.1.10297.202.7000.3.10.3ScalargarpLeaveAllTimeread-writecurrentThe GARP leave all time. The leave all time must bigger then leave time.
1.3.6.1.4.1.10297.202.7000.3.11Nodegvrp
1.3.6.1.4.1.10297.202.7000.3.11.1ScalargvrpStatusread-writecurrentThe status of GVRP.
1.3.6.1.4.1.10297.202.7000.3.12NodexRingElite
1.3.6.1.4.1.10297.202.7000.3.12.1ScalarxRingEliteStateread-writecurrentThe status of X-Ring Elite.
1.3.6.1.4.1.10297.202.7000.3.12.2TablexRingEliteRingIDTablenot-accessiblecurrentThe table of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2.1RowxRingEliteRingIDEntrynot-accessiblecurrentThe entry of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2.1.1ColumnxRingEliteRingIDIndexread-onlycurrentThe index of X-Ring Elite ring ID
1.3.6.1.4.1.10297.202.7000.3.12.2.1.2ColumnxRingEliteRingIDread-writecurrentThe ring ID of X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.3ColumnxRingEliteRuleread-writecurrentThe rule of the X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.4ColumnxRingElitePort1read-writecurrentThe port1 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.12.2.1.5ColumnxRingElitePort2read-writecurrentThe port2 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.12.2.1.6ColumnxRingEliteRingIDStatusread-onlycurrentThe status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.7ColumnxRingElitePort1Statusread-onlycurrentThe port1 status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.8ColumnxRingElitePort2Statusread-onlycurrentThe port2 status of this X-Ring Elite
1.3.6.1.4.1.10297.202.7000.3.12.2.1.99ColumnxRingEliteRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.3.13Nodeloopback
1.3.6.1.4.1.10297.202.7000.3.13.1ScalarloopbackEnabledread-writecurrentThe status of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.2ScalarloopbackIntervalread-writecurrentThe interval of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.3ScalarloopbackRecoverTimeread-writecurrentThe recover time of loopback detection.
1.3.6.1.4.1.10297.202.7000.3.13.4TableloopbackPortTablenot-accessiblecurrentThe port table of loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1RowloopbackPortEntrynot-accessiblecurrentThe port entry of loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.1ColumnloopbackPortIndexread-onlycurrentThe index of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.2ColumnloopbackPortEnabledread-writecurrentThe enabled status of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.13.4.1.3ColumnloopbackPortLoopStatusread-onlycurrentThe loop status of port loopback detection
1.3.6.1.4.1.10297.202.7000.3.14NodexRingPro
1.3.6.1.4.1.10297.202.7000.3.14.1ScalarxRingProStatusread-writecurrentThe status of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.2NodexRingProRingSetting
1.3.6.1.4.1.10297.202.7000.3.14.2.1ScalarxRingProRingIDread-writecurrentThe ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.2.2ScalarxRingProRingPort1read-writecurrentThe port1 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.2.3ScalarxRingProRingPort2read-writecurrentThe port2 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.2.4ScalarxRingProRingAddread-writecurrentThe add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3NodexRingProCoupleSetting
1.3.6.1.4.1.10297.202.7000.3.14.3.1ScalarxRingProCoupleIDread-writecurrentThe couple ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.2ScalarxRingProCouplePortread-writecurrentThe couple port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.3ScalarxRingProCoupleMasterRingIDread-writecurrentThe master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.3.4ScalarxRingProCoupleAddread-writecurrentThe add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.4TablexRingProInfoTablenot-accessiblecurrentThe table of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1RowxRingProInfoEntrynot-accessiblecurrentThe entry of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.1ColumnxRingProInfoRingIDread-onlycurrentThe ring ID of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.2ColumnxRingProInfoModeread-onlycurrentThe mode of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.3ColumnxRingProInfoOperStateread-onlycurrentThe operation state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.4ColumnxRingProInfoPort1read-onlycurrentThe port1 of X-Ring Pro Infomation.
1.3.6.1.4.1.10297.202.7000.3.14.4.1.5ColumnxRingProInfoPort1FwdStateread-onlycurrentThe port1 forwarding state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.6ColumnxRingProInfoPort2read-onlycurrentThe port2 of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.7ColumnxRingProInfoPort2FwdStateread-onlycurrentThe port2 forwarding state of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.8ColumnxRingProInfoDelread-writecurrentThe delete action of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.4.1.9ColumnxRingProInfoRoleread-onlycurrentThe role of X-Ring Pro Infomation
1.3.6.1.4.1.10297.202.7000.3.14.5NodexRingProPairSetting
1.3.6.1.4.1.10297.202.7000.3.14.5.1ScalarxRingProPairIDread-writecurrentThe pair ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.2ScalarxRingProPairPortread-writecurrentThe pair port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.3ScalarxRingProPairMasterRingIDread-writecurrentThe pair master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.5.4ScalarxRingProPairAddread-writecurrentThe add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6NodexRingProRPairSetting
1.3.6.1.4.1.10297.202.7000.3.14.6.1ScalarxRingProRPairIDread-writecurrentThe R-pair ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.2ScalarxRingProRPairPortread-writecurrentThe R-pair port of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.3ScalarxRingProRPairMasterRingIDread-writecurrentThe R-pair master ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.6.4ScalarxRingProRPairAddread-writecurrentThe add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.7NodexRingProChainSetting
1.3.6.1.4.1.10297.202.7000.3.14.7.1ScalarxRingProChainIDread-writecurrentThe chain ring ID of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.14.7.2ScalarxRingProChainRoleread-writecurrentThe role of X-Ring Pro.
1.3.6.1.4.1.10297.202.7000.3.14.7.3ScalarxRingProChainHeadPortread-writecurrentThe head port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.7.4ScalarxRingProChainMemberPortread-writecurrentThe member port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.14.7.5ScalarxRingProChainAddread-writecurrentThe add action of X-Ring Pro
1.3.6.1.4.1.10297.202.7000.3.15Nodegmrp
1.3.6.1.4.1.10297.202.7000.3.15.1ScalargmrpStatusread-writecurrentThe status of GMRP.
1.3.6.1.4.1.10297.202.7000.3.15.2TablegmrpMulticastGroupTablenot-accessiblecurrentThe table of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1RowgmrpMulticastGroupEntrynot-accessiblecurrentThe entry of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.1ColumngmrpMulticastGroupIndexread-onlycurrentThe index of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.2ColumngmrpMulticastGroupVlanIdread-onlycurrentThe vlan id of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.3ColumngmrpMulticastGroupMacAddressread-onlycurrentThe MAC address of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.4ColumngmrpMulticastGroupTyperead-onlycurrentThe type of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.15.2.1.5ColumngmrpMulticastGroupMemberPortsread-onlycurrentThe member ports of GMRP multicast group
1.3.6.1.4.1.10297.202.7000.3.16Nodeerps
1.3.6.1.4.1.10297.202.7000.3.16.1ScalarerpsStateread-writecurrentThe status of ERPS
1.3.6.1.4.1.10297.202.7000.3.16.2TableerpsGroupTablenot-accessiblecurrentThe table of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1RowerpsGroupEntrynot-accessiblecurrentThe entry of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.1ColumnerpsGroupRingIndexread-onlycurrentThe index of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.2ColumnerpsGroupInstanceread-writecurrentThe instance of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.3ColumnerpsGroupRingIdread-writecurrentThe ring ID of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.4ColumnerpsGroupRoleread-writecurrentThe role of ERPS group
1.3.6.1.4.1.10297.202.7000.3.16.2.1.5ColumnerpsGroupStateread-onlycurrentThe current state of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.6ColumnerpsGroupEastLinkread-writecurrentThe east link port of ERPS group. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.16.2.1.7ColumnerpsGroupEastLinkRPLread-writecurrentThe rpl setting of ERPS group east link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.8ColumnerpsGroupEastLinkStateread-onlycurrentThe current state of ERPS group east link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.9ColumnerpsGroupWestLinkread-writecurrentThe west link port of ERPS group. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.3.16.2.1.10ColumnerpsGroupWestLinkRPLread-writecurrentThe rpl setting of ERPS group west link
1.3.6.1.4.1.10297.202.7000.3.16.2.1.11ColumnerpsGroupWestLinkStateread-onlycurrentThe current state of ERPS group west link.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.12ColumnerpsGroupMELread-writecurrentThe MEL of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.13ColumnerpsGroupRAPSChannelVlanread-writecurrentThe r-aps channel vlan of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.14ColumnerpsGroupTrafficChannelread-writecurrentThe traffic channel of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.15ColumnerpsGroupRevertiveread-writecurrentThe revertive setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.16ColumnerpsGroupTyperead-writecurrentThe ring type of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.17ColumnerpsGroupInterconnectedread-writecurrentThe interconnected setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.18ColumnerpsGroupChannelread-writecurrentThe virtual channel setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.19ColumnerpsGroupTcPropagationread-writecurrentThe tc-propagation setting of ERPS group.
1.3.6.1.4.1.10297.202.7000.3.16.2.1.20ColumnerpsWTRTimerread-writecurrentThe WTR timer of ERPS group.(1 Unit = 1 minute)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.21ColumnerpsGuardTimerread-writecurrentThe guard timer of ERPS group.(1 Unit = 10 ms)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.22ColumnerpsHoldOffTimerread-writecurrentThe hold-off timer of ERPS group.(1 Unit = 100 ms)
1.3.6.1.4.1.10297.202.7000.3.16.2.1.99ColumnerpsGroupRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.4NodemacAddressTable
1.3.6.1.4.1.10297.202.7000.4.1NodestaticMacSetting
1.3.6.1.4.1.10297.202.7000.4.1.1TablestaticMacSettingTablenot-accessiblecurrentThe table of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1.1RowstaticMacSettingEntrynot-accessiblecurrentThe entry of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1.1.1ColumnstaticMacSettingIndexread-onlycurrentThe index of static MAC setting
1.3.6.1.4.1.10297.202.7000.4.1.1.1.2ColumnstaticMacSettingMacAddressread-writecurrentThe MAC address to which packets will be statically forwardef. It only supports unicast MAC address
1.3.6.1.4.1.10297.202.7000.4.1.1.1.3ColumnstaticMacSettingVlanread-writecurrentthe VLAN which the static MAC belongs to
1.3.6.1.4.1.10297.202.7000.4.1.1.1.4ColumnstaticMacSettingPortread-writecurrentthe port number of the MAC entry. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ...
1.3.6.1.4.1.10297.202.7000.4.1.1.1.99ColumnstaticMacSettingRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.4.2NodedynamicMacSetting
1.3.6.1.4.1.10297.202.7000.4.2.1ScalarmacAgingTimeread-writecurrentThe dynamic MAC address aging out value
1.3.6.1.4.1.10297.202.7000.4.3NodedynamicLearned
1.3.6.1.4.1.10297.202.7000.4.3.1ScalarclearMacAddressTableread-writecurrentClear the MAC table
1.3.6.1.4.1.10297.202.7000.4.3.2TablemacAddressInfoTablenot-accessiblecurrentThe table of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1RowmacAddressInfoEntrynot-accessiblecurrentThe entry of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.1ColumnmacAddressInfoIndexread-onlycurrentThe index of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.2ColumnmacAddressInfoMACread-onlycurrentThe MAC address to show dynamic MAC entries.
1.3.6.1.4.1.10297.202.7000.4.3.2.1.3ColumnmacAddressInfoVlanread-onlycurrentThe VLAN to show dynamic MAC entries.
1.3.6.1.4.1.10297.202.7000.4.3.2.1.4ColumnmacAddressInfoTyperead-onlycurrentThe type of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.5ColumnmacAddressInfoPortread-onlycurrentThe port of MAC address info
1.3.6.1.4.1.10297.202.7000.4.3.2.1.6ColumnaddtoStaticMacTableread-writecurrentAdd the entry from dynamic to static.
1.3.6.1.4.1.10297.202.7000.5Nodesecurity
1.3.6.1.4.1.10297.202.7000.6Nodeqos
1.3.6.1.4.1.10297.202.7000.6.1Nodegeneral
1.3.6.1.4.1.10297.202.7000.6.1.1ScalarqosModeread-writecurrentThe QoS operaion mode
1.3.6.1.4.1.10297.202.7000.6.1.2TableqosPortSettingTablenot-accessiblecurrentThe table of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2.1RowqosPortSettingEntrynot-accessiblecurrentThe entry of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2.1.1ColumnqosPortIndexread-onlycurrentThe port index of QoS port setting
1.3.6.1.4.1.10297.202.7000.6.1.2.1.2ColumnqosPortCosread-writecurrentThe default CoS/802.1p priority value
1.3.6.1.4.1.10297.202.7000.6.1.2.1.3ColumnqosPortRemarkCoSread-writecurrentenable/disable CoS remark
1.3.6.1.4.1.10297.202.7000.6.1.2.1.4ColumnqosPortRemarkDSCPread-writecurrentenable/disable DSCP remark
1.3.6.1.4.1.10297.202.7000.6.1.2.1.5ColumnqosPortRemarkIPPrecedenceread-writecurrentEnable/Disable IP Precedence remark
1.3.6.1.4.1.10297.202.7000.6.1.3TablequeueSettingTablenot-accessiblecurrentThe table of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3.1RowqueueSettingEntrynot-accessiblecurrentthe entry of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3.1.1ColumnqueueIndexread-onlycurrentThe index of queue setting
1.3.6.1.4.1.10297.202.7000.6.1.3.1.2ColumnqueueMethodread-writecurrentqueue to strict priority type or Weight round robin type
1.3.6.1.4.1.10297.202.7000.6.1.3.1.3ColumnqueueWeightread-writecurrentIf the queue type is WRR, set the queue weight for the queue.
1.3.6.1.4.1.10297.202.7000.6.1.3.1.4ColumnqueuePercentOfWRRBandwidthread-onlycurrentThe percentage of the WRR bandwidth
1.3.6.1.4.1.10297.202.7000.6.1.4TablecostoQueueMapTablenot-accessiblecurrentThe table of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1RowcostoQueueMapEntrynot-accessiblecurrentThe entry of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1.1ColumncosIndexread-onlycurrentThe index of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.4.1.2ColumncosQueueread-writecurrentThe queue of CoS to queue
1.3.6.1.4.1.10297.202.7000.6.1.5TablequeuetoCosMapTablenot-accessiblecurrentThe table of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1RowqueuetoCosMapEntrynot-accessiblecurrentThe entry of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1.1ColumnqueuetoCosIndexread-onlycurrentThe queue index of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.5.1.2ColumnqueueCosread-writecurrentThe cos of queue to CoS
1.3.6.1.4.1.10297.202.7000.6.1.6TabledscptoQueueMapTablenot-accessiblecurrentThe table of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1RowdscptoQueueMapEntrynot-accessiblecurrentThe entry of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1.1ColumndscpIndexread-onlycurrentThe DSCP index of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.6.1.2ColumndscpQueueread-writecurrentThe queue of DSCP to queue
1.3.6.1.4.1.10297.202.7000.6.1.7TablequeuetoDSCPMapTablenot-accessiblecurrentThe table of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1RowqueuetoDSCPMapEntrynot-accessiblecurrentThe entry of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1.1ColumnqueuetoDSCPIndexread-onlycurrentThe queue index of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.7.1.2ColumnqueuDscpread-writecurrentThe DSCP of queue to DSCP
1.3.6.1.4.1.10297.202.7000.6.1.8TableipPrecedencetoQueueMapTablenot-accessiblecurrentThe table of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1RowipPrecedencetoQueueMapEntrynot-accessiblecurrentThe entry of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1.1ColumnipPrecedenceIndexread-onlycurrentThe index of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.8.1.2ColumnipPrecedenceQueueread-writecurrentThe queue of IP precedence to queue
1.3.6.1.4.1.10297.202.7000.6.1.9TablequeueToipPrecedenceMapTablenot-accessiblecurrentThe table of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1RowqueueToipPrecedenceMapEntrynot-accessiblecurrentThe entry of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1.1ColumnqueueToipPrecedenceIndexread-onlycurrentThe index of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.1.9.1.2ColumnipPrecedenceread-writecurrentThe IP precedence of queue to IP precedence
1.3.6.1.4.1.10297.202.7000.6.2NodeqosBasicMode
1.3.6.1.4.1.10297.202.7000.6.2.1ScalartrustModeread-writecurrentthe QoS operation mode. CoS/802.1p: Traffic is mapped to queues based on the CoS field in the VLAN tag, or based on the per-port default CoS value if there is …
1.3.6.1.4.1.10297.202.7000.6.2.2TableqosBasicPortTablenot-accessiblecurrentThe table of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2.1RowqosBasicPortEntrynot-accessiblecurrentThe entry of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2.1.1ColumnqosBasicPortIndexread-onlycurrentThe port index of QoS port
1.3.6.1.4.1.10297.202.7000.6.2.2.1.2ColumnqosBasicPortTrustread-writecurrentthe port trust state Enabled: Traffic from this port will follow the global trust type. Disabled: Traffic will always go to the lowest priority queue.
1.3.6.1.4.1.10297.202.7000.6.3NoderateLimit
1.3.6.1.4.1.10297.202.7000.6.3.1NodeingressBandwidthControl
1.3.6.1.4.1.10297.202.7000.6.3.1.1TableingressBandwidthTablenot-accessiblecurrentThe table of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1RowingressBandwidthEntrynot-accessiblecurrentThe entry of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.1ColumningressBandwidthPortIndexread-onlycurrentThe port index of ingress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.2ColumningressBandwidthStateread-writecurrentenable/disable ingress bandwidth control
1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.3ColumningressBandwidthRateread-writecurrentrate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.6.3.2NodeegressBandwidthControl
1.3.6.1.4.1.10297.202.7000.6.3.2.1TableegressBandwidthTablenot-accessiblecurrentThe table of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1RowegressBandwidthEntrynot-accessiblecurrentThe entry of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.1ColumnegressBandwidthPortIndexread-onlycurrentThe port index of egress bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.2ColumnegressBandwidthStateread-writecurrentenable/disable egress bandwidth control
1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.3ColumnegressBandwidthRateread-writecurrentrate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.6.3.3NodeegressQueueBandwidthControl
1.3.6.1.4.1.10297.202.7000.6.3.3.1TableegressqueueBandwidthTablenot-accessiblecurrentThe table of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1RowegressqueueBandwidthEntrynot-accessiblecurrentThe entry of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.1ColumnegressqueueBandwidthPortIndexread-onlycurrentThe port index of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.2ColumnegressqueueBandwidthQueueIndexread-onlycurrentThe queue index of egress queue bandwidth
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.3ColumnegressqueueBandwidthStateread-writecurrentenable/disable egress bandwidth contro
1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.4ColumnegressqueueBandwidthCirread-writecurrentrate value, unit:16Kbps
1.3.6.1.4.1.10297.202.7000.7Nodemanagement
1.3.6.1.4.1.10297.202.7000.7.1Nodelldp
1.3.6.1.4.1.10297.202.7000.7.1.1ScalarlldpEnabledread-writecurrentEnable/Disable LLDP protocol on this switch
1.3.6.1.4.1.10297.202.7000.7.1.2ScalarlldpPduDisableActionread-writecurrentSelect LLDP PDU handling action to be filtered, bridging or flooded when LLDP is globally disabled.
1.3.6.1.4.1.10297.202.7000.7.1.3ScalarlldpTransmissionIntervalread-writecurrentThe interval at which frames are transmitted. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535. LLDP transmission delay sh…
1.3.6.1.4.1.10297.202.7000.7.1.4ScalarlldpHoldtimeMultiplierread-writecurrentThe multiplier on the transmit interval to assign to TTL. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535.
1.3.6.1.4.1.10297.202.7000.7.1.5ScalarlldpReinitializationDelayread-writecurrentThe delay before a re-initialization
1.3.6.1.4.1.10297.202.7000.7.1.6ScalarlldpTransmitDelayread-writecurrentThe delay after an LLDP frame is sent. LLDP transmission delay should not be larger than LLDP transmission interval * 0.25
1.3.6.1.4.1.10297.202.7000.7.1.7TablelldpPortConfTablenot-accessiblecurrentThe table of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7.1RowlldpPortConfEntrynot-accessiblecurrentThe entry of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7.1.1ColumnlldpPortIndexread-onlycurrentThe port index of LLDP port configuration
1.3.6.1.4.1.10297.202.7000.7.1.7.1.2ColumnlldpPortStateread-writecurrentthe transmission state of LLDP port interface. Disable: Disable the transmission of LLDP PDUs. RX Only: Receive LLDP PDUs only. TX Only: Transmit LLDP PDUs onl…
1.3.6.1.4.1.10297.202.7000.7.1.7.1.3ColumnlldpPortOptionalTLVsread-writecurrentThe LLDP optional TLVs to be carried
1.3.6.1.4.1.10297.202.7000.7.1.7.1.4ColumnlldpPortVlansread-writecurrentThe VLAN name ID to be carried. User can inpu vlan such as: 1-2, 100.
1.3.6.1.4.1.10297.202.7000.7.1.8NodelocalDevice
1.3.6.1.4.1.10297.202.7000.7.1.8.1ScalarlldpLocalDeviceChassisidsubtyperead-onlycurrentLLDP local device chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.2ScalarlldpLocalDeviceChassisIDread-onlycurrentLLDP local device chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.8.3ScalarlldpLocalDeviceSystemNameread-onlycurrentLLDP local device system name
1.3.6.1.4.1.10297.202.7000.7.1.8.4ScalarlldpLocalDeviceSystemDescriptionread-onlycurrentLLDP local device system description
1.3.6.1.4.1.10297.202.7000.7.1.8.5ScalarlldpLocalDeviceCapabilitiesSupportedread-onlycurrentLLDP local device capabilities supported
1.3.6.1.4.1.10297.202.7000.7.1.8.6ScalarlldpLocalDeviceCapabilitiesEnabledread-onlycurrentLLDP local device capabilities enabled
1.3.6.1.4.1.10297.202.7000.7.1.8.7ScalarlldpLocalDevicePortIDsubtyperead-onlycurrentLLDP local device port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.8TablelldpLocalPortStatusTablenot-accessiblecurrentThe table of LLFP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1RowlldpLocalPortStatusEntrynot-accessiblecurrentThe entry of LLFP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.1ColumnlldpLocalPortIndexread-onlycurrentThe port index of LLDP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.2ColumnlldpLocalPortStatusread-onlycurrentLLDP local port status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.3ColumnlldpLocalPortChassisIDsubtyperead-onlycurrentLLDP local port chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.4ColumnlldpLocalPortChassisIDread-onlycurrentLLDP local port chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.5ColumnlldpLocalPortSystemnameread-onlycurrentLLDP local port system name
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.6ColumnlldpLocalPortSystemdescriptionread-onlycurrentLLDP local port system description
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.7ColumnlldpLocalPortSupportedsystemcapabilitiesread-onlycurrentLLDP local port supported system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.8ColumnlldpLocalPortEnablesystemcapabilitiesread-onlycurrentLLDP local port enable system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.9ColumnlldpLocalPortIDsubtyperead-onlycurrentLLDP local port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.10ColumnlldpLocalPortIDread-onlycurrentLLDP local port ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.11ColumnlldpLocalPortDescriptionread-onlycurrentLLDP local port description
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.12ColumnlldpLocalPortManagementAddressread-onlycurrentLLDP local port management address
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.13ColumnlldpLocalPortAuto-negosupportedread-onlycurrentLLDP local port auto-nego supported
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.14ColumnlldpLocalPortAuto-negoenabledread-onlycurrentLLDP local port auto-nego enabled
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.15ColumnlldpLocalPortAuto-negoAdvertisedCapabilitiesread-onlycurrentLLDP local port auto-nego advertised capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.16ColumnlldpLocalPortOperationMAUtyperead-onlycurrentLLDP local port operation MAU type
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.17ColumnlldpLocalPortIeee8023MaxFrameSizeread-onlycurrentLLDP local port IEEE 802.3 max frame size
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.18ColumnlldpLocalPortAggregationCapabilityread-onlycurrentLLDP local port aggregation capabilities
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.19ColumnlldpLocalPortAggregationStatusread-onlycurrentLLDP local port aggregation status
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.20ColumnlldpLocalPortAggregationPortIDread-onlycurrentLLDP local port aggregation port ID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.21ColumnlldpLocalPortPvidread-onlycurrentLLDP local port PVID
1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.22ColumnlldpLocalPortVlanNameread-onlycurrentLLDP local port vlan name
1.3.6.1.4.1.10297.202.7000.7.1.9NoderemoteDevice
1.3.6.1.4.1.10297.202.7000.7.1.9.1TablelldpremoteDeviceTablenot-accessiblecurrentThe table of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1RowlldpremoteDeviceEntrynot-accessiblecurrentThe entry of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.1ColumnlldpremoteDeviceIndexread-onlycurrentThe index of LLDP remote device
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.2ColumnlldpremoteDeviceLocalPortread-onlycurrentLLDP remote device local port
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.3ColumnlldpremoteDeviceChassisIDsubtyperead-onlycurrentLLDP remote device chassis ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.4ColumnlldpremoteDeviceChassisIDread-onlycurrentLLDP remote device chassis ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.5ColumnlldpremoteDevicePortIDsubtyperead-onlycurrentLLDP remote device port ID subtype
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.6ColumnlldpremoteDevicePortIDread-onlycurrentLLDP remote device port ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.7ColumnlldpremoteDeviceSystemNameread-onlycurrentLLDP remote device system name
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.8ColumnlldpremoteDeviceTimetoliveread-onlycurrentLLDP remote device time to live
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.9ColumnlldpremoteDeviceEntryIndexread-onlycurrentLLDP remote device entry index
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.10ColumnlldpremoteDevicePortDescriptionread-onlycurrentLDP remote device port description
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.11ColumnlldpremoteDeviceSystemdescriptionread-onlycurrentLLDP remote device system description
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.12ColumnlldpremoteDeviceSupportedsystemcapabilitiesread-onlycurrentLLDP remote device supported syste, capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.13ColumnlldpremoteDeviceEnablesystemcapabilitiesread-onlycurrentLLDP remote device enable system capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.14ColumnlldpremoteDeviceManagementAddressread-onlycurrentLLDP remote device management address
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.15ColumnlldpremoteDeviceAuto-negosupportedread-onlycurrentLLDP remote device auto-nego supported
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.16ColumnlldpremoteDeviceAuto-negoenabledread-onlycurrentLLDP remote device auto-nego enabled
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.17ColumnlldpremoteDeviceAuto-negoAdvertisedCapabilitiesread-onlycurrentLLDP remote device auto-nego advertised capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.18ColumnlldpremoteDeviceOperationMAUtyperead-onlycurrentLLDP remote device operation MAU type
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.19ColumnlldpremoteDeviceMdipowersupportportclassread-onlycurrentLLDP remote device PSE MDI power support class
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.20ColumnlldpremoteDevicePsemdipowersupportread-onlycurrentLLDP remote device PSE MDI power support
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.21ColumnlldpremoteDevicePsemdipowerstatusread-onlycurrentLLDP remote device PSE MDI power status
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.22ColumnlldpremoteDevicePsepowerpaircontrolabilityread-onlycurrentLLDP remote device PSE power pair control ability
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.23ColumnlldpremoteDevicePsepowerpairread-onlycurrentLLDP remote device PSE power pair
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.24ColumnlldpremoteDevicePsepowerclassread-onlycurrentLLDP remote device PSE power class
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.25ColumnlldpremoteDeviceIeee8023MaxFrameSizeread-onlycurrentLLDP remote device IEEE 802.3 Max frame size
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.26ColumnlldpremoteDeviceAggregationCapabilityread-onlycurrentLLDP remote device aggregation capabilities
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.27ColumnlldpremoteDeviceAggregationStatusread-onlycurrentLLDP remote device aggregation status
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.28ColumnlldpremoteDeviceAggregationPortIDread-onlycurrentLLDP remote device aggregation Port ID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.29ColumnlldpremoteDevicePvidread-onlycurrentLLDP remote device PVID
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.30ColumnlldpremoteDeviceVlanNameread-onlycurrentLLDP remote device VLAN name
1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.31ColumnlldpremoteDeviceRowStatusread-writecurrentLLDP remote device device rowstatus
1.3.6.1.4.1.10297.202.7000.7.1.10TablelldpOverloadingTablenot-accessiblecurrentThe table of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10.1RowlldpOverloadingEntrynot-accessiblecurrentThe entry of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10.1.1ColumnlldpOverloadingPortIndexread-onlycurrentThe port index of LLDP overlaoding
1.3.6.1.4.1.10297.202.7000.7.1.10.1.2ColumnlldpOverloadingTotalread-onlycurrentLLDP overloading total
1.3.6.1.4.1.10297.202.7000.7.1.10.1.3ColumnlldpOverloadingLeftToSendread-onlycurrentLLDP overloading left to send
1.3.6.1.4.1.10297.202.7000.7.1.10.1.4ColumnlldpOverloadingStatusread-onlycurrentLLDP overloading status
1.3.6.1.4.1.10297.202.7000.7.1.10.1.5ColumnlldpOverloadingMandatoryTLVsread-onlycurrentLLDP overloading mandatory TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.6ColumnlldpOverloadingIeee8023TLVsread-onlycurrentLLDP overloading IEEE 802.3 TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.7ColumnlldpOverloadingOptionalTLVsread-onlycurrentLLDP overloading optional TLVs
1.3.6.1.4.1.10297.202.7000.7.1.10.1.8ColumnlldpOverloadingIeee8021TLVsread-onlycurrentLLDP overloading IEEE 802.1 TLVs
1.3.6.1.4.1.10297.202.7000.7.2Nodesnmp
1.3.6.1.4.1.10297.202.7000.7.2.1ScalarsnmpStateread-writecurrentSNMP golbal setting
1.3.6.1.4.1.10297.202.7000.7.2.2TablesnmpCommunityTablenot-accessiblecurrentThe table of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1RowsnmpCommunityEntrynot-accessiblecurrentThe entry of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1.1ColumnsnmpCommunityIndexread-onlycurrentThe index of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1.2ColumnsnmpCommunityStringread-writecurrentThe name of SNMP community
1.3.6.1.4.1.10297.202.7000.7.2.2.1.3ColumnsnmpCommunityAccessRightread-writecurrentSNMP access mode
1.3.6.1.4.1.10297.202.7000.7.2.2.1.99ColumnsnmpCommunityRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.3TablesnmpTrapHostTablenot-accessiblecurrentThe table of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1RowsnmpTrapHostEntrynot-accessiblecurrentThe entry of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.1ColumnsnmpTrapHostIndexread-onlycurrentThe index of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.2ColumnsnmpTrapHostIpaddressread-writecurrentThe ipaddress or hostname of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.3ColumnsnmpTrapHostCommunityNameread-writecurrentThe community name of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.4ColumnsnmpTrapHostVersionread-writecurrentThe SNMP version of SNMP trap host
1.3.6.1.4.1.10297.202.7000.7.2.3.1.99ColumnsnmpTrapHostRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.4Tablesnmpv3UserTablenot-accessiblecurrentThe table of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1Rowsnmpv3UserEntrynot-accessiblecurrentThe entry of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.1Columnsnmpv3UserIndexread-onlycurrentThe index of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.2Columnsnmpv3UserNameread-writecurrentThe name of SNMPv3 user. Please input more than 8 characters.
1.3.6.1.4.1.10297.202.7000.7.2.4.1.3Columnsnmpv3UserAccessRightread-writecurrentThe access right of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.4Columnsnmpv3UserAuthProtocolread-writecurrentThe authentication protocol of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.5Columnsnmpv3UserAuthPasswordread-writecurrentThe authentication password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.'
1.3.6.1.4.1.10297.202.7000.7.2.4.1.6Columnsnmpv3UserPrivProtocolread-writecurrentThe priviledge protocol of SNMPv3 user
1.3.6.1.4.1.10297.202.7000.7.2.4.1.7Columnsnmpv3UserPrivPasswordread-writecurrentThe priviledge password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.'
1.3.6.1.4.1.10297.202.7000.7.2.4.1.99Columnsnmpv3UserRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.7.2.5Scalarsnmpv3EngineIDread-onlycurrentThe snmpv3 engine ID
1.3.6.1.4.1.10297.202.7000.7.3Nodepoe
1.3.6.1.4.1.10297.202.7000.7.3.1NodepoeSystemSetting
1.3.6.1.4.1.10297.202.7000.7.3.1.1ScalarpoeFwVersionread-onlycurrentThe PoE firmware version
1.3.6.1.4.1.10297.202.7000.7.3.1.2ScalarpoeMaxPowerAvailableread-writecurrentThe maximum power available in PoE. actual maximun power value is different according Switch Model. ex : EKI-7710G maximun poe power value is 120W. EKI-7712G m…
1.3.6.1.4.1.10297.202.7000.7.3.1.3ScalarpoeActualPowerConsumptionread-onlycurrentThe actual power consumption in PoE
1.3.6.1.4.1.10297.202.7000.7.3.1.4ScalarpoeOverLoadDisconnectread-writecurrentThe overload disconnect mode in PoE
1.3.6.1.4.1.10297.202.7000.7.3.2TablepoePortSettingTablenot-accessiblecurrentThe table of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2.1RowpoePortSettingEntrynot-accessiblecurrentThe table of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2.1.1ColumnpoePortIndexread-onlycurrentThe index of PoE port setting
1.3.6.1.4.1.10297.202.7000.7.3.2.1.2ColumnpoePortStateread-writecurrentThe state of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.3ColumnpoePortLegacyread-writecurrentThe legacy of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.4ColumnpoePortPowerLimitClassread-writecurrentThe power limit form classification of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.5ColumnpoePortPriorityread-writecurrentThe priority of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.2.1.6ColumnpoePortPowerLimitread-writecurrentThe power limit of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3TablepoePortStatusTablenot-accessiblecurrentThe table of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3.1RowpoePortStatusEntrynot-accessiblecurrentThe table of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3.1.1ColumnpoePortStatusIndexread-onlycurrentThe index of PoE port status
1.3.6.1.4.1.10297.202.7000.7.3.3.1.2ColumnpoePortCurrentread-onlycurrentThe current of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.3ColumnpoePortVoltageread-onlycurrentThe voltage of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.4ColumnpoePortPowerread-onlycurrentThe power of PoE port
1.3.6.1.4.1.10297.202.7000.7.3.3.1.5ColumnpoePortTempread-onlycurrentThe temperature of PoE port
1.3.6.1.4.1.10297.202.7000.7.4NodetcpModbus
1.3.6.1.4.1.10297.202.7000.7.4.1ScalartcpModbusStateread-writecurrentThe state of TCP Modbus
1.3.6.1.4.1.10297.202.7000.7.4.2ScalartcpModbusTimeoutread-writecurrentThe time out of TCP Modbus
1.3.6.1.4.1.10297.202.7000.7.5NodedhcpServer
1.3.6.1.4.1.10297.202.7000.7.5.1ScalardhcpServerStateread-writecurrentThe state of DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.2NodedhcpServerGlobalSetting
1.3.6.1.4.1.10297.202.7000.7.5.2.1ScalardhcpServerLeaseTimeread-writecurrentThe lease time of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.2ScalardhcpServerLowIPread-writecurrentThe low IP address of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.3ScalardhcpServerHighIPread-writecurrentThe high IP address of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.4ScalardhcpServerSubmaskread-writecurrentThe subnet mask of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.5ScalardhcpServerGatewayread-writecurrentThe gateway of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.6ScalardhcpServerDNSread-writecurrentThe DNS of DHCP server
1.3.6.1.4.1.10297.202.7000.7.5.2.7ScalardhcpServerStatusread-writecurrentIf user set golbal setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.2.8ScalardhcpServerClearIpPoolread-writecurrentClear IP pool in DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.3TabledhcpServerPortTablenot-accessiblecurrentThe table of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3.1RowdhcpServerPortEntrynot-accessiblecurrentThe entry of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3.1.1ColumndhcpServerPortIndexread-onlycurrentThe index of DHCP server port setting
1.3.6.1.4.1.10297.202.7000.7.5.3.1.2ColumndhcpServerPortLowIPread-writecurrentThe low IP address of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.3ColumndhcpServerPortHighIPread-writecurrentThe high IP address of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.4ColumndhcpServerPortMaskread-writecurrentThe subnet mask of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.5ColumndhcpServerPortGWread-writecurrentThe gateway of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.6ColumndhcpServerPortDNSread-writecurrentThe DNS of DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.3.1.7ColumndhcpServerPortStatusread-writecurrentIf user set port setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.3.1.8ColumndhcpServerPortClearread-writecurrentClear IP poll on DHCP server port
1.3.6.1.4.1.10297.202.7000.7.5.4TabledhcpServerOpt82Tablenot-accessiblecurrentThe table of DHCP option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4.1RowdhcpServerOpt82Entrynot-accessiblecurrentThe entry of DHCP option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4.1.1ColumndhcpServerOpt82Indexread-onlycurrentThe index of DHCP server option 82 setting
1.3.6.1.4.1.10297.202.7000.7.5.4.1.2ColumndhcpServerOpt82CircuitIDFormatread-writecurrentThe circuit ID format of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.3ColumndhcpServerOpt82CircuitIDread-writecurrentThe circuit ID of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.4ColumndhcpServerOpt82RemoteIDFormatread-writecurrentThe remote ID format of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.5ColumndhcpServerOpt82RemoteIDread-writecurrentThe remote ID of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.6ColumndhcpServerOpt82LowIPread-writecurrentThe low IP address of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.7ColumndhcpServerOpt82HighIPread-writecurrentThe high IP address of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.8ColumndhcpServerOpt82Maskread-writecurrentThe subnet mask of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.9ColumndhcpServerOpt82GWread-writecurrentThe gateway of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.10ColumndhcpServerOpt82DNSread-writecurrentThe DNS of DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.4.1.11ColumndhcpServerOpt82Statusread-writecurrentIf user set option82 setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.4.1.12ColumndhcpServerOpt82Clearread-writecurrentClear IP poll on DHCP option 82
1.3.6.1.4.1.10297.202.7000.7.5.5TabledhcpServerLeaseTablenot-accessiblecurrentThe table of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1RowdhcpServerLeaseEntrynot-accessiblecurrentThe entry of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.1ColumndhcpServerLeaseIndexread-onlycurrentThe index of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.2ColumndhcpServerLeaseIpread-onlycurrentThe IP address of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.3ColumndhcpServerLeaseClientMacread-onlycurrentThe client MAC of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.4ColumndhcpServerLeaseStartTimeread-onlycurrentThe start time of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.5ColumndhcpServerLeaseEndTimeread-onlycurrentThe end time of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.5.1.6ColumndhcpServerLeaseTyperead-onlycurrentThe type of DHCP server lease entry
1.3.6.1.4.1.10297.202.7000.7.5.6ScalardhcpServerRestartread-writecurrentRestart DHCP Server
1.3.6.1.4.1.10297.202.7000.7.5.7TabledhcpServerVlanTablenot-accessiblecurrentThe table of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1RowdhcpServerVlanEntrynot-accessiblecurrentThe entry of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1.1ColumndhcpServerVlanIndexread-onlycurrentThe index of DHCP server VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1.2ColumndhcpServerVlanIdread-writecurrentThe VLAN ID of DHCP VLAN setting
1.3.6.1.4.1.10297.202.7000.7.5.7.1.3ColumndhcpServerVlanLowIPread-writecurrentThe low IP address of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.4ColumndhcpServerVlanHighIPread-writecurrentThe high IP address of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.5ColumndhcpServerVlanMaskread-writecurrentThe subnet mask of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.6ColumndhcpServerVlanGWread-writecurrentThe gateway of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.7ColumndhcpServerVlanDNSread-writecurrentThe DNS of DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.7.1.8ColumndhcpServerVlanStatusread-writecurrentIf user set VLAN setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
1.3.6.1.4.1.10297.202.7000.7.5.7.1.9ColumndhcpServerVlanClearread-writecurrentClear IP poll on DHCP VLAN
1.3.6.1.4.1.10297.202.7000.7.5.8TabledhcpServerClientMacTablenot-accessiblecurrentThe table of DHCP client mac setting
1.3.6.1.4.1.10297.202.7000.7.5.8.1RowdhcpServerClientMacEntrynot-accessiblecurrentThe entry of DHCP server client mac setting
1.3.6.1.4.1.10297.202.7000.7.5.8.1.1ColumndhcpServerClientMacEntryIDread-writecurrentThe index of DHCP server client mac entry
1.3.6.1.4.1.10297.202.7000.7.5.8.1.2ColumndhcpServerClientMacEntryMacread-writecurrentThe MAC address of DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.3ColumndhcpServerClientMacEntryIPread-writecurrentThe IP address of DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.4ColumndhcpServerClientMacEntryMaskread-writecurrentThe subnet mask of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.5ColumndhcpServerClientMacEntryGWread-writecurrentThe gateway of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.6ColumndhcpServerClientMacEntryDNSread-writecurrentThe DNS of DHCP DHCP server client mac entry.
1.3.6.1.4.1.10297.202.7000.7.5.8.1.7ColumndhcpServerClientMacEntryRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.6NodesmtpClient
1.3.6.1.4.1.10297.202.7000.7.6.1ScalarsmtpActiveProfileread-writecurrentThe active profile of SMTP client
1.3.6.1.4.1.10297.202.7000.7.6.2TablesmtpProfileTablenot-accessiblecurrentThe table of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2.1RowsmtpProfileEntrynot-accessiblecurrentThe entry of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2.1.1ColumnsmtpProfileIndexread-onlycurrentThe index of SMTP client profile
1.3.6.1.4.1.10297.202.7000.7.6.2.1.2ColumnsmtpServerIpread-writecurrentThe SMTP server IP
1.3.6.1.4.1.10297.202.7000.7.6.2.1.3ColumnsmtpServerPortread-onlycurrentThe SMTP server port
1.3.6.1.4.1.10297.202.7000.7.6.2.1.4ColumnsmtpSenderMailread-writecurrentThe SMTP sender mail
1.3.6.1.4.1.10297.202.7000.7.6.2.1.5ColumnsmtpTargetMail1read-writecurrentThe SMTP target mail 1
1.3.6.1.4.1.10297.202.7000.7.6.2.1.6ColumnsmtpTargetMail2read-writecurrentThe SMTP target mail 2
1.3.6.1.4.1.10297.202.7000.7.6.2.1.7ColumnsmtpTargetMail3read-writecurrentThe SMTP target mail 3
1.3.6.1.4.1.10297.202.7000.7.6.2.1.8ColumnsmtpTargetMail4read-writecurrentThe SMTP target mail 4
1.3.6.1.4.1.10297.202.7000.7.6.2.1.9ColumnsmtpTargetMail5read-writecurrentThe SMTP target mail 5
1.3.6.1.4.1.10297.202.7000.7.6.2.1.10ColumnsmtpTargetMail6read-writecurrentThe SMTP target mail 6
1.3.6.1.4.1.10297.202.7000.7.6.2.1.11ColumnsmtpTargetMail7read-writecurrentThe SMTP target mail 7
1.3.6.1.4.1.10297.202.7000.7.6.2.1.12ColumnsmtpTargetMail8read-writecurrentThe SMTP target mail 8
1.3.6.1.4.1.10297.202.7000.7.7Nodermon
1.3.6.1.4.1.10297.202.7000.7.7.1TablermonStatisticsTablenot-accessiblecurrentThe table of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1RowrmonStatisticsEntrynot-accessiblecurrentThe entry of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.1ColumnrmonStatisticsIndexread-writecurrentThe index of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.2ColumnrmonStatisticsPortread-writecurrentThe port number of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.3ColumnrmonStatisticsDropEventsread-onlycurrentThe drop events of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.4ColumnrmonStatisticsOctetsread-onlycurrentThe octets of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.5ColumnrmonStatisticsPacketsread-onlycurrentThe packets of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.6ColumnrmonStatisticsBroadcastread-onlycurrentThe broadcast of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.7ColumnrmonStatisticsMulticastread-onlycurrentThe multicast of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.8ColumnrmonStatisticsOwnerread-writecurrentThe owner of RMON Statistics
1.3.6.1.4.1.10297.202.7000.7.7.1.1.9ColumnrmonStatisticsRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.2TablermonHistoryTablenot-accessiblecurrentThe table of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1RowrmonHistoryEntrynot-accessiblecurrentThe entry of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.1ColumnrmonHistoryIndexread-writecurrentThe index of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.2ColumnrmonHistoryPortread-writecurrentThe port number of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.3ColumnrmonHistoryBucketsRequestread-writecurrentThe buckets requested of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.5ColumnrmonHistoryIntervalread-writecurrentThe index of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.6ColumnrmonHistoryOwnerread-writecurrentThe port number of RMON history
1.3.6.1.4.1.10297.202.7000.7.7.2.1.7ColumnrmonHistoryRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.3TablermonAlarmTablenot-accessiblecurrentThe table of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1RowrmonAlarmEntrynot-accessiblecurrentThe entry of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.1ColumnrmonAlarmIndexread-writecurrentThe index of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.2ColumnrmonAlarmIntervalread-writecurrentThe interval of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.3ColumnrmonAlarmVariableread-writecurrentThe variable of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.4ColumnrmonAlarmSampleTyperead-writecurrentThe sample type of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.5ColumnrmonAlarmRisingThresholdread-writecurrentThe rising threshold of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.6ColumnrmonAlarmFallingThresholdread-writecurrentThe falling threshold of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.7ColumnrmonAlarmRisingEventIndexread-writecurrentThe rising event index of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.8ColumnrmonAlarmFallingEventIndexread-writecurrentThe falling event indx of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.9ColumnrmonAlarmOwnerread-writecurrentThe owner of RMON alarm
1.3.6.1.4.1.10297.202.7000.7.7.3.1.10ColumnrmonAlarmRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.7.4TablermonEventTablenot-accessiblecurrentThe table of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1RowrmonEventEntrynot-accessiblecurrentThe entry of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.1ColumnrmonEventIndexread-writecurrentThe index of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.2ColumnrmonEventDescriptionread-writecurrentThe description of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.3ColumnrmonEventTyperead-writecurrentThe type of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.4ColumnrmonEventCommunityread-writecurrentThe community of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.5ColumnrmonEventOwnerread-writecurrentThe owner of RMON event
1.3.6.1.4.1.10297.202.7000.7.7.4.1.7ColumnrmonEventRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.4.1.10297.202.7000.7.8Nodentp
1.3.6.1.4.1.10297.202.7000.7.8.1ScalarntpServerread-writecurrentenable/disable NTP server.
1.3.6.1.4.1.10297.202.7000.7.8.2ScalarntpManualTimeread-writecurrentenable/disable NTP manual time.
1.3.6.1.4.1.10297.202.7000.7.8.3TablentpServerTablenot-accessiblecurrentThe table of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1RowntpServerEntrynot-accessiblecurrentThe entry of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1.1ColumnntpServerIndexread-onlycurrentThe index of NTP server
1.3.6.1.4.1.10297.202.7000.7.8.3.1.2ColumnntpServerIpread-writecurrentThe ip address of NTP server
1.3.6.1.4.1.10297.202.7000.8Nodediagnostics
1.3.6.1.4.1.10297.202.7000.8.1NodecopperTest
1.3.6.1.4.1.10297.202.7000.8.1.1ScalarportNumberread-writecurrentThe port ID for copper test
1.3.6.1.4.1.10297.202.7000.8.1.2ScalarcopperTestActionread-writecurrentCopper test action
1.3.6.1.4.1.10297.202.7000.8.1.3NodecopperTestResult
1.3.6.1.4.1.10297.202.7000.8.1.3.1ScalarresultPortread-onlycurrentThe copper test port ID
1.3.6.1.4.1.10297.202.7000.8.1.3.2ScalarchannelAread-onlycurrentThe copper test result for channel A
1.3.6.1.4.1.10297.202.7000.8.1.3.3ScalarcableLengthAread-onlycurrentThe copper test result for cable length A
1.3.6.1.4.1.10297.202.7000.8.1.3.4ScalarchannelBread-onlycurrentThe copper test result for channel B
1.3.6.1.4.1.10297.202.7000.8.1.3.5ScalarcableLengthBread-onlycurrentThe copper test result forcable length B
1.3.6.1.4.1.10297.202.7000.8.1.3.6ScalarchannelCread-onlycurrentThe copper test result for channel C
1.3.6.1.4.1.10297.202.7000.8.1.3.7ScalarcableLengthCread-onlycurrentThe copper test result for cable length C
1.3.6.1.4.1.10297.202.7000.8.1.3.8ScalarchannelDread-onlycurrentThe copper test result for channel D
1.3.6.1.4.1.10297.202.7000.8.1.3.9ScalarcableLengthDread-onlycurrentThe copper test result for cable length D
1.3.6.1.4.1.10297.202.7000.8.1.3.10ScalarchannelRxread-onlycurrentThe copper test result for channel Rx
1.3.6.1.4.1.10297.202.7000.8.1.3.11ScalarcableLengthRxread-onlycurrentThe copper test result for cable length Rx
1.3.6.1.4.1.10297.202.7000.8.1.3.12ScalarchannelTxread-onlycurrentThe copper test result for channel Tx
1.3.6.1.4.1.10297.202.7000.8.1.3.13ScalarcableLengthTxread-onlycurrentThe copper test result for cable length Tx
1.3.6.1.4.1.10297.202.7000.8.2NodepingTest
1.3.6.1.4.1.10297.202.7000.8.2.1ScalarpingIPAddressread-writecurrentThe IP address or hostname of ping target
1.3.6.1.4.1.10297.202.7000.8.2.2ScalarpingCountread-writecurrentHow many times to send ping request packets
1.3.6.1.4.1.10297.202.7000.8.2.3ScalarpingIntervalread-writecurrentTime interval between each ping request packets
1.3.6.1.4.1.10297.202.7000.8.2.4ScalarpingSizeread-writecurrentThe size of ping packet
1.3.6.1.4.1.10297.202.7000.8.2.5ScalarpingActionread-writecurrentThe ping action
1.3.6.1.4.1.10297.202.7000.8.2.6ScalarpingResultread-onlycurrentAfter ping finished, results will show in this OID
1.3.6.1.4.1.10297.202.7000.8.3Nodeipv6pingTest
1.3.6.1.4.1.10297.202.7000.8.3.1ScalarpingIPv6Addressread-writecurrentThe IPv6 address of ping target
1.3.6.1.4.1.10297.202.7000.8.3.2ScalarpingIPv6Countread-writecurrentHow many times to send ping request packet
1.3.6.1.4.1.10297.202.7000.8.3.3ScalarpingIPv6Intervalread-writecurrentTime interval between each ping request packet
1.3.6.1.4.1.10297.202.7000.8.3.4ScalarpingIPv6Sizeread-writecurrentThe size of ping packet
1.3.6.1.4.1.10297.202.7000.8.3.5ScalarpingIPv6Actionread-writecurrentThe IPv6 ping action
1.3.6.1.4.1.10297.202.7000.8.3.6ScalarpingIPv6Resultread-onlycurrentAfter ping finished, results will show in this field
1.3.6.1.4.1.10297.202.7000.8.4NodeloggingSetting
1.3.6.1.4.1.10297.202.7000.8.4.1ScalarloggingServiceread-writecurrentEnable/Disable logging system
1.3.6.1.4.1.10297.202.7000.8.4.2TablelocalLoggingTablenot-accessiblecurrentThe table of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2.1RowlocalLoggingEntrynot-accessiblecurrentThe entry of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2.1.1ColumnlocalLoggingIndexread-onlycurrentThe index of local logging
1.3.6.1.4.1.10297.202.7000.8.4.2.1.2Columnbufferedtargetread-onlycurrentThe target to store log message Buffered: Store log messages in device buffer. File: Store log message in file. Console: Show the log message on console.
1.3.6.1.4.1.10297.202.7000.8.4.2.1.3ColumnlocalLoggingStatusread-onlycurrentEnable/Disable status the logging system
1.3.6.1.4.1.10297.202.7000.8.4.2.1.4ColumnlocalLoggingSeverityread-writecurrentSeverity of log message which will be stored
1.3.6.1.4.1.10297.202.7000.8.4.3TableremoteloggingTablenot-accessiblecurrentThe table of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3.1RowremoteloggingEntrynot-accessiblecurrentThe entry of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3.1.1ColumnremoteloggingIndexread-onlycurrentThe index of remote logging
1.3.6.1.4.1.10297.202.7000.8.4.3.1.2ColumnremoteloggingAddressread-writecurrentThe IP address of remote log server
1.3.6.1.4.1.10297.202.7000.8.4.3.1.3ColumnremoteloggingPortread-writecurrentThe port number of remote log server
1.3.6.1.4.1.10297.202.7000.8.4.3.1.4ColumnremoteloggingSeverityread-writecurrentThe severity of log messages which will be sent
1.3.6.1.4.1.10297.202.7000.8.4.3.1.5ColumnremoteloggingFacilityread-writecurrentThe facility of log messages which will be sent
1.3.6.1.4.1.10297.202.7000.8.4.3.1.99ColumnremoteloggingRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.8.5NodefactoryDefault
1.3.6.1.4.1.10297.202.7000.8.5.1ScalarfactoryDefaultActionread-writecurrentuser to restore switch to factory default
1.3.6.1.4.1.10297.202.7000.8.5.2ScalarfactoryDefaultKeepFlagread-writecurrentKeep setting when switch is restore to factory default.
1.3.6.1.4.1.10297.202.7000.8.6Nodereboot
1.3.6.1.4.1.10297.202.7000.8.6.1ScalarrebootActionread-writecurrentuser to reboot the switch
1.3.6.1.4.1.10297.202.7000.8.7NodedhcpAutoProvision
1.3.6.1.4.1.10297.202.7000.8.7.1ScalardhcpAutoProvisionEnableread-writecurrentThe status of DHCP auto provision
1.3.6.1.4.1.10297.202.7000.8.8NodeledIndication
1.3.6.1.4.1.10297.202.7000.8.8.1ScalarledAlarmStateread-writecurrentEnable/Disable LED alarm
1.3.6.1.4.1.10297.202.7000.8.8.2ScalarledPowerFailureEventread-writecurrentEnable/Disable LED power failure event
1.3.6.1.4.1.10297.202.7000.8.8.3ScalarledFiberLinkdownEventread-writecurrentEnable/Disable LED fiber port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.4ScalarledPortLinkdownEventread-writecurrentEnable/Disable LED port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.5ScalarledPortLinkdownEventPortread-writecurrentThe member ports of LED port Link down event
1.3.6.1.4.1.10297.202.7000.8.8.6TableledEventInfoTablenot-accessiblecurrentThe table of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1RowledEventInfoEntrynot-accessiblecurrentThe entry of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.1ColumnledEventIndexread-onlycurrentThe index of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.2ColumnledTyperead-onlycurrentThe type of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.3ColumnledEventread-onlycurrentThe event of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.4ColumnledStateread-onlycurrentThe state of led event info
1.3.6.1.4.1.10297.202.7000.8.8.6.1.5ColumnledErrorTimesread-onlycurrentThe error times of led event info
1.3.6.1.4.1.10297.202.7000.9Nodemaintenance
1.3.6.1.4.1.10297.202.7000.9.1NodebackupManager
1.3.6.1.4.1.10297.202.7000.9.1.1ScalarbackupMethodread-writecurrentThe method of backup file
1.3.6.1.4.1.10297.202.7000.9.1.2ScalarbackupServerIPread-writecurrentThe IP address of the TFTP server
1.3.6.1.4.1.10297.202.7000.9.1.3ScalarbackupTyperead-writecurrentThe backup configuration type
1.3.6.1.4.1.10297.202.7000.9.1.4ScalarbackupImageread-writecurrentThe backup firmware image
1.3.6.1.4.1.10297.202.7000.9.1.5ScalarbackupActionread-writecurrentThe backup action
1.3.6.1.4.1.10297.202.7000.9.2NodeupgradeManager
1.3.6.1.4.1.10297.202.7000.9.2.1ScalarupgradeMethodread-writecurrentThe upgrade file method
1.3.6.1.4.1.10297.202.7000.9.2.2ScalarupgradeServerIPread-writecurrentThe server IP address
1.3.6.1.4.1.10297.202.7000.9.2.3ScalarupgradeFileNameread-writecurrentThe upgrade file name
1.3.6.1.4.1.10297.202.7000.9.2.4ScalarupgradeTyperead-writecurrentThe upgrade type
1.3.6.1.4.1.10297.202.7000.9.2.5ScalarupgradeImageread-writecurrentThe uprade firmware image
1.3.6.1.4.1.10297.202.7000.9.2.6ScalarupgradeActionread-writecurrentThe upgrade action
1.3.6.1.4.1.10297.202.7000.9.2.7ScalarupgradeStatusread-onlycurrentThe upgrade status
1.3.6.1.4.1.10297.202.7000.9.3NodedualImage
1.3.6.1.4.1.10297.202.7000.9.3.1ScalaractiveImageread-writecurrentThe active image
1.3.6.1.4.1.10297.202.7000.9.3.2TableimageInfoTablenot-accessiblecurrentThe table of image info
1.3.6.1.4.1.10297.202.7000.9.3.2.1RowimageInfoEntrynot-accessiblecurrentThe entry of image info
1.3.6.1.4.1.10297.202.7000.9.3.2.1.1ColumnflashPartitionread-onlycurrentThe FLASH partition
1.3.6.1.4.1.10297.202.7000.9.3.2.1.2ColumnimageNameread-onlycurrentThe image name
1.3.6.1.4.1.10297.202.7000.9.3.2.1.3ColumnimageSizeread-onlycurrentThe image size
1.3.6.1.4.1.10297.202.7000.9.3.2.1.4ColumncreatedTimeread-onlycurrentThe FW creation time
1.3.6.1.4.1.10297.202.7000.9.3.2.1.5ColumnimageVersionread-onlycurrentThe image version
1.3.6.1.4.1.10297.202.7000.9.4NodeconfigurationManager
1.3.6.1.4.1.10297.202.7000.9.4.1ScalarsourceFileread-writecurrentThe configuration source file
1.3.6.1.4.1.10297.202.7000.9.4.2ScalardestinationFileread-writecurrentThe configuration destination file
1.3.6.1.4.1.10297.202.7000.9.4.3ScalarsaveConfigurationread-writecurrentSave the current configuration
1.3.6.1.4.1.10297.202.7000.9.5NodeaccountManager
1.3.6.1.4.1.10297.202.7000.9.5.1TablelocalUserTablenot-accessiblecurrentThe table of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1RowlocalUserEntrynot-accessiblecurrentThe entry of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.1ColumnlocalUserIndexread-onlycurrentThe index of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.2ColumnlocalUserNameread-writecurrentThe user name of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.3ColumnlocalUserPasswordTyperead-writecurrentThe pasword type of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.4ColumnlocalUserPasswordread-writecurrentThe password of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.5ColumnlocalUserPrivilegeTyperead-writecurrentThe privilege type of local user
1.3.6.1.4.1.10297.202.7000.9.5.1.1.99ColumnlocalUserRowStatusread-createcurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.4.1.10297.202.7000.9.6NodenKey
1.3.6.1.4.1.10297.202.7000.9.6.1ScalarnKeyAutoModeread-writecurrentThe auto mode of N-Key.
1.3.6.1.4.1.10297.202.7000.9.6.2ScalarnKeyStatusread-writecurrentSelect N-key is idle or backup the current configurations to N-Key or restore N-Key's configurations to switch. The fourth option is read-only.
1.3.6.1.4.1.10297.202.7000.99Nodetraps
1.3.6.1.4.1.10297.202.7000.99.1NodetrapObject
1.3.6.1.4.1.10297.202.7000.99.1.1ScalarddmiAlarmDescrread-onlycurrentThe description of DDMI trap
1.3.6.1.4.1.10297.202.7000.99.1.2ScalarxRingMasterStatusread-onlycurrentThe status of XRing Pro Master.
1.3.6.1.4.1.10297.202.7000.99.2NotificationddmiAlarmWarningcurrentThe DDMI trap
1.3.6.1.4.1.10297.202.7000.99.3NotificationxRingProMasterChangecurrentThis trap is sent if XRing Pro master change
1.3.6.1.4.1.10297.202.7000.99.5NotificationstpStateChangecurrentThis trap is sent if spanning tree port state change to blocking or forwarding
1.3.6.1.5.1NodestormControl
1.3.6.1.5.1.1ScalarstromControlUnitread-writecurrentThe mode of stromg control. pps: strom control rate calculates by packet-based bps: strom control rate calculates by octet-based
1.3.6.1.5.1.2ScalarstromControlPreamble-IFGread-writecurrentthe rate calculates w/o preamble & IFG (20 bytes) Excluded: exclude preamble & IFG (20 bytes) when count ingress storm control rate. Included: include preamble…
1.3.6.1.5.1.3TablestromControlPortTablenot-accessiblecurrentThe table of port security setting
1.3.6.1.5.1.3.1RowstromControlPortEntrynot-accessiblecurrentThe entry of port security setting
1.3.6.1.5.1.3.1.1ColumnstromControlPortIndexread-onlycurrentThe port index of port security setting
1.3.6.1.5.1.3.1.2ColumnstromControlPortStateread-writecurrentthe state of setting
1.3.6.1.5.1.3.1.3ColumnstromControlPortActionread-writecurrentthe state of setting Drop: Packets exceed storm control rate will be droped. Shutdown: Port exceed storm control rate will be shutdown.
1.3.6.1.5.1.3.1.4Columnenablebroadcastread-writecurrentenable/diable the broadcast packet
1.3.6.1.5.1.3.1.5ColumnbroadcastRateread-writecurrentValue of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.5.1.3.1.6ColumnenableunknownMulticastread-writecurrentenable/diable the unknown multicast packet
1.3.6.1.5.1.3.1.7ColumnunknownMulticastRateread-writecurrentValue of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.5.1.3.1.8ColumnenableunknownUnicastread-writecurrentenable/diable the unknown unicast packet
1.3.6.1.5.1.3.1.9ColumnunknownUnicastRateread-writecurrentValue of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000.
1.3.6.1.5.2NodeprotectedPort
1.3.6.1.5.2.1TableprotectedPortTablenot-accessiblecurrentThe table of protected port
1.3.6.1.5.2.1.1RowprotectedPortEntrynot-accessiblecurrentThe entry of protected port
1.3.6.1.5.2.1.1.1ColumnprotectedPortIndexread-onlycurrentThe port index of protected port
1.3.6.1.5.2.1.1.2ColumnprotectedPortTyperead-writecurrentConfigure port protect type Unprotected: Unprotected port can communicate with all ports. Protected: Prevent protected ports from communication with each other.
1.3.6.1.5.3Nodedos
1.3.6.1.5.3.1ScalardmacEqualsmacread-writecurrentBoth the source and the destination MAC addresses are the same
1.3.6.1.5.3.2Scalarlandread-writecurrentBoth the source and the destination IPv4/IPv6 addresses are the same
1.3.6.1.5.3.3ScalarudpBlatread-writecurrentBoth the source and the destination UDP port are the same
1.3.6.1.5.3.4ScalartcpBlatread-writecurrentBoth the source and the destination TCP port are the same
1.3.6.1.5.3.5Scalarpodread-writecurrentPing packets that length are larger than 65535 bytes
1.3.6.1.5.3.6Scalaripv6MinFragmentread-writecurrentIPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed.
1.3.6.1.5.3.7Scalaripv6MinFragmentValueread-writecurrentIPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed.
1.3.6.1.5.3.8ScalaricmpFragmentread-writecurrentFragmented ICMP packets.
1.3.6.1.5.3.9Scalaripv4PingMaxSizeread-writecurrentIPv4 PING packet with the length
1.3.6.1.5.3.10Scalaripv6PingMaxSizeread-writecurrentIPv6 PING packet with the length
1.3.6.1.5.3.11ScalarpingMaxSizeSettingread-writecurrentPing packet Max Size Setting. The default value is 512 Bytes, it can be configured if needed.
1.3.6.1.5.3.12ScalarsmurfAttackread-writecurrentICMP echo request packet that destination IPv4 address is broadcast address.
1.3.6.1.5.3.13ScalarsmurfAttackValueread-writecurrentThe default Netmask length is 0, and it can be configured if needed.
1.3.6.1.5.3.14ScalartcpMinHdrSizeread-writecurrentTCP packet that header length is less than the configured value.
1.3.6.1.5.3.15ScalartcpMinHdrSizeValueread-writecurrentThe default TCP Min Hdr Size is 20, it can be configured if needed.
1.3.6.1.5.3.16Scalartcp-Synread-writecurrentTCP SYN packets with source port less than 1024.
1.3.6.1.5.3.17ScalarnullScanAttackread-writecurrentTCP sequence number is zero, and all control flags are zeroes.
1.3.6.1.5.3.18ScalarxMasScanAttackread-writecurrentTCP sequence number is zero, and the FIN/URG/PSH flags are set.
1.3.6.1.5.3.19ScalartcpSYN-FINAttackread-writecurrentA TCP packet with the SYN and FIN flags set.
1.3.6.1.5.3.20ScalartcpSYN-RSTAttackread-writecurrentA TCP packet with the SYN and RST flags set.
1.3.6.1.5.3.21ScalartcpFragmentread-writecurrentFragmented TCP packets.
1.3.6.1.5.3.22TabledosPortTablenot-accessiblecurrentThe table of DoS port
1.3.6.1.5.3.22.1RowdosPortEntrynot-accessiblecurrentThe entry of DoS port
1.3.6.1.5.3.22.1.1ColumndosportIndexread-onlycurrentThe port index of DoS port
1.3.6.1.5.3.22.1.2ColumndosProtectionread-writecurrentConfigure port protect state
1.3.6.1.5.4Nodeaccess
1.3.6.1.5.4.1NodetelnetInfo
1.3.6.1.5.4.1.1ScalartelnetServiceread-writecurrentenable/disable the tlent service
1.3.6.1.5.4.1.2ScalarcurrentTelnetSessionCountread-onlycurrentThe current telnet session counter
1.3.6.1.5.4.2NodehttpSetting
1.3.6.1.5.4.2.1ScalarhttpServiceread-writecurrentenable/disable the http service
1.3.6.1.5.4.2.2ScalarhttpSessionTimeoutread-writecurrentthe HTTP session timeout
1.3.6.1.5.4.3NodehttpsSetting
1.3.6.1.5.4.3.1ScalarhttpsServiceread-writecurrentenable/disable the https service
1.3.6.1.5.4.3.2ScalarhttpsSessionTimeoutread-writecurrentthe HTTPs session timeout
1.3.6.1.5.4.4NodesshInfo
1.3.6.1.5.4.4.1ScalarsshServiceread-writecurrentenable/disable the ssh service
1.3.6.1.5.5NodeportSecurity
1.3.6.1.5.5.1TableportSecurityTablenot-accessiblecurrentThe table of port security
1.3.6.1.5.5.1.1RowportSecurityEntrynot-accessiblecurrentThe entry of port security
1.3.6.1.5.5.1.1.1ColumnportSecurityPortIndexread-onlycurrentThe port index of port security
1.3.6.1.5.5.1.1.2ColumnportSecurityEnabledread-writecurrentEnable/Disable port security
1.3.6.1.5.5.1.1.3ColumnportSecurityFDBLimitread-writecurrentThe number of FDB learning.
1.3.6.1.5.5.1.1.4ColumnportSecurityViolationMACNotifyread-writecurrentEnable/Disable Violation MAC Notification
1.3.6.1.5.6NodeipSecurity
1.3.6.1.5.6.1ScalaripSecurityStatusread-writecurrentEnable/Disable IP security
1.3.6.1.5.6.2TableipSecurityTablenot-accessiblecurrentThe table of IP security
1.3.6.1.5.6.2.1RowipSecurityEntrynot-accessiblecurrentThe entry of IP security
1.3.6.1.5.6.2.1.1ColumnipSecurityIndexread-onlycurrentThe index of IP security
1.3.6.1.5.6.2.1.2ColumnipSecurityIPAddrread-writecurrentThe IP address of IP security
1.3.6.1.5.6.2.1.3ColumnipSecurityIPMaskread-writecurrentThe IP mask of IP security
1.3.6.1.5.6.2.1.4ColumnipSecurityServiceread-writecurrentThe service of IP security
1.3.6.1.5.6.2.1.5ColumnipSecurityVlanIdread-writecurrentThe VLAN id of IP security. This value will appear on multiple interface.
1.3.6.1.5.6.2.1.99ColumnipSecurityRowStatusread-writecurrentUser can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
1.3.6.1.5.7Nodeieee8021x
1.3.6.1.5.7.1Scalarieee8021xStateread-writecurrentEnable/Disable IEEE 802.1x
1.3.6.1.5.7.2Scalarieee8021xServerIPread-writecurrentThe server IP address of IEEE 802.1x
1.3.6.1.5.7.3Scalarieee8021xServerPortread-writecurrentThe server port of IEEE 802.1x
1.3.6.1.5.7.4Scalarieee8021xAccountingPortread-writecurrentThe accounting port of IEEE 802.1x
1.3.6.1.5.7.5Scalarieee8021xSecurityKeyread-writecurrentThe security key of IEEE 802.1x
1.3.6.1.5.7.6Scalarieee8021xReauthPeriodread-writecurrentThe reauth period of IEEE 802.1x
1.3.6.1.5.7.7Tableieee8021xPortTablenot-accessiblecurrentThe table of IEEE 802.1x
1.3.6.1.5.7.7.1Rowieee8021xPortEntrynot-accessiblecurrentThe entry of IEEE 802.1x
1.3.6.1.5.7.7.1.1Columnieee8021xPortIndexread-onlycurrentThe index of IEEE 802.1x
1.3.6.1.5.7.7.1.2Columnieee8021xPortStateread-writecurrentThe port state of IEEE 802.1x
1.3.6.1.5.7.8Scalarieee8021xAuthBasedread-writecurrentThe authentication based of IEEE 802.1x
1.3.6.1.5.8NodesecurityLogin
1.3.6.1.5.8.1ScalarsecurityLoginStateread-writecurrentEnable/Disable security login.
1.3.6.1.5.8.2NoderadiusServer
1.3.6.1.5.8.2.1ScalarradiusServerIPread-writecurrentRadius server IP.
1.3.6.1.5.8.2.2ScalarradiusServerPortread-writecurrentRadius server port.
1.3.6.1.5.8.2.3ScalarradiusServerSecurityKeyread-writecurrentThe security key of radius server.
1.3.6.1.5.8.3NodetacacsServer
1.3.6.1.5.8.3.1ScalartacacsServerIPread-writecurrentTACACS server IP.
1.3.6.1.5.8.3.2ScalartacacsServerPortread-writecurrentTACACS server port.
1.3.6.1.5.8.3.3ScalartacacsServerSecurityKeyread-writecurrentThe security key of TACACS server.
1.3.6.1.5.8.4ScalarsecurityLoginTyperead-writecurrentEnable/Disable security login.
1.3.6.1.5.8.5ScalarsecurityLoginHttpStateread-writecurrentEnable/Disable HTTP type of security login.
1.3.6.1.5.8.6ScalarsecurityLoginTelnetStateread-writecurrentEnable/Disable telnet type of security login.
1.3.6.1.5.8.7ScalarsecurityLoginSSHStateread-writecurrentEnable/Disable SSH type of security login.
1.3.6.1.5.9Nodeacl
1.3.6.1.5.9.1TablemacAclTablenot-accessiblecurrentThe table of mac acl
1.3.6.1.5.9.1.1RowmacAclEntrynot-accessiblecurrentThe entry of mac acl
1.3.6.1.5.9.1.1.1ColumnmacAclIndexread-writecurrentThe index of mac ACL entry
1.3.6.1.5.9.1.1.2ColumndestinationMacAddressread-writecurrentThe destination MAC address of mac ACL entry.
1.3.6.1.5.9.1.1.3ColumndestinationMacMaskread-writecurrentThe destination MAC mask of mac ACL entry.
1.3.6.1.5.9.1.1.4ColumnsourceMacAddressread-writecurrentThe source MAC address of mac ACL entry.
1.3.6.1.5.9.1.1.5ColumnsourceMacMaskread-writecurrentThe source MAC mask of mac ACL entry.
1.3.6.1.5.9.1.1.6ColumnmacAclEtherTyperead-writecurrentThe ether type of mac ACL entry
1.3.6.1.5.9.1.1.7ColumnmacAclVlanIDread-writecurrentThe vlan id of mac ACL entry
1.3.6.1.5.9.1.1.8ColumnmacAclPortListread-writecurrentThe port list of mac ACL entry.
1.3.6.1.5.9.1.1.9ColumnmacAclActionread-writecurrentThe action of mac ACL entry.
1.3.6.1.5.9.1.1.10ColumnmacAclActiveStatusread-writecurrentThe active status of mac ACL entry.
1.3.6.1.5.9.1.1.99ColumnmacAclRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.5.9.2TableipAclTablenot-accessiblecurrentThe table of ip acl
1.3.6.1.5.9.2.1RowipAclEntrynot-accessiblecurrentThe entry of ip acl
1.3.6.1.5.9.2.1.1ColumnipAclIndexread-writecurrentThe index of ip ACL entry
1.3.6.1.5.9.2.1.2ColumndestinationIpAddressread-writecurrentThe destination ip address of ip ACL entry.
1.3.6.1.5.9.2.1.3ColumndestinationIpMaskread-writecurrentThe destination ip mask of ip ACL entry.
1.3.6.1.5.9.2.1.4ColumnsourceIpAddressread-writecurrentThe source ip address of ip ACL entry.
1.3.6.1.5.9.2.1.5ColumnsourceIpMaskread-writecurrentThe source ip mask of ip ACL entry.
1.3.6.1.5.9.2.1.6ColumnipProtocolread-writecurrentThe ip protocol of ip ACL entry.
1.3.6.1.5.9.2.1.7Columnl4DestinationPortread-writecurrentThe L4 destination port of ip ACL entry
1.3.6.1.5.9.2.1.8Columnl4SourcePortread-writecurrentThe L4 source port of ip ACL entry
1.3.6.1.5.9.2.1.9ColumnipAclPortListread-writecurrentThe port list of ip ACL entry.
1.3.6.1.5.9.2.1.10ColumnipAclActionread-writecurrentThe action of ip ACL entry.
1.3.6.1.5.9.2.1.11ColumnipAclActiveStatusread-writecurrentThe active status of ip ACL entry.
1.3.6.1.5.9.2.1.99ColumnipAclRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.5.10NodeipSourceGuard
1.3.6.1.5.10.1ScalaripSourceGuardEnablePortsread-writecurrentThe enable port list for ip source guard.
1.3.6.1.5.10.2TableipSourceGuardTablenot-accessiblecurrentThe table of ip source guard
1.3.6.1.5.10.2.1RowipSourceGuardEntrynot-accessiblecurrentThe entry of ip source guard
1.3.6.1.5.10.2.1.1ColumnipSourceGuardIndexread-onlycurrentThe index of ip source guard entry
1.3.6.1.5.10.2.1.2ColumnipSourceGuardSourceIpread-writecurrentThe destination ip address of ip source guard entry.
1.3.6.1.5.10.2.1.3ColumnipSourceGuardSourceMacread-writecurrentThe destination MAC address of ip source guard entry.
1.3.6.1.5.10.2.1.4ColumnipSourceGuardPortread-writecurrentThe port of ip source guard entry
1.3.6.1.5.10.2.1.5ColumnipSourceGuardRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
1.3.6.1.5.11NodedhcpSnooping
1.3.6.1.5.11.1ScalardhcpSnoopingStateread-writecurrentEnable/Disable DHCP snooping.
1.3.6.1.5.11.2ScalardhcpSnoopingPortsread-writecurrentThe enable port list for dhcp snooping.
1.3.6.1.5.11.3ScalardhcpSnoopingBindingPortsread-writecurrentThe enable blinding port list for dhcp snooping.
1.3.6.1.5.11.4TabledhcpSnoopingTablenot-accessiblecurrentThe table of dhcp snooping
1.3.6.1.5.11.4.1RowdhcpSnoopingEntrynot-accessiblecurrentThe entry of dhcp snooping
1.3.6.1.5.11.4.1.1ColumndhcpSnoopingIndexread-onlycurrentThe index of dhcp snooping entry
1.3.6.1.5.11.4.1.2ColumndhcpSnoopingMacread-onlycurrentThe destination MAC address of dhcp snooping entry.
1.3.6.1.5.11.4.1.3ColumndhcpSnoopingIpread-onlycurrentThe destination ip address of dhcp snooping entry.
1.3.6.1.5.11.4.1.4ColumndhcpSnoopingLeaseTimeread-onlycurrentThe lease time of dhcp snooping entry
1.3.6.1.5.11.4.1.5ColumndhcpSnoopingVlanIdread-onlycurrentThe VLAN ID of dhcp snooping entry
1.3.6.1.5.11.4.1.6ColumndhcpSnoopingPortread-onlycurrentThe port of dhcp snooping entry
1.3.6.1.5.12NodearpSpoofing
1.3.6.1.5.12.1TablearpSpoofingTablenot-accessiblecurrentThe table of arp spoofing
1.3.6.1.5.12.1.1RowarpSpoofingEntrynot-accessiblecurrentThe entry of arp spoofing
1.3.6.1.5.12.1.1.1ColumnarpSpoofingIndexread-onlycurrentThe index of arp spoofing entry
1.3.6.1.5.12.1.1.2ColumnarpSpoofingSourceMacread-writecurrentThe source MAC address of arp spoofing entry.
1.3.6.1.5.12.1.1.3ColumnarpSpoofingSourceIpread-writecurrentThe source ip address of arp spoofing entry.
1.3.6.1.5.12.1.1.4ColumnarpSpoofingRowStatusread-createcurrentUser can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.