AIMOS
564 objects
The MIB is divided into ranges with different rights of access, in order not to grant any person access to the entire data. The protected main part of the information is located in the branch aimosObjects and can be accessed only after an authorising of the user, called login. The areas are accessible as follows: . The public area aimosPublic is accessible without any restrictions.It serves mainly to prepare the login procedure. . aimosLogin can be accessed only with special community names generated by the A.I.M.O.S. SNMP Agent. Here the login takes place. This authorising takes place via username and password. A valid user/password combination combined with a community name generated by the agent is called a session after the login has take place. The main part of the MIB (off aimosObjects downward) is permitted only within a valid session. . aimosObjects contains the objects of the managed network elements. This area is accessible only after a successful login (that is within a valid session) . aimosNotifications contains objects, which concern the alarm notifications. . aimosGroups and aimosCompliances satisfies SNMP requirements.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 zeroDotZero |
| SNMPv2-TC | DisplayString RowPointer TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1 | Notificationthe | current | MasterID is an Unsigned32 value within the range from 1 to 9.999 used in order to uniquely identify Master Units, each containing up to 13 Racks. While each Ma… | |
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | current | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | current | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | current | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is k… |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is th… |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
| 1.3.6.1.4.1.6408 | Identitymikom | current | Root of Andrew Wireless Systems GmbH | |
| 1.3.6.1.4.1.6408.201 | Identityaimos | The MIB is divided into ranges with different rights of access, in order not to grant any person access to the entire data. The protected main part of the info… | ||
| 1.3.6.1.4.1.6408.201.1 | IdentityaimosPublic | current | Before an user is able to login to the A.I.M.O.S. SNMP Agent, some preconditions must be fulfilled, which are located beneath aimosPublic and explained below. … | |
| 1.3.6.1.4.1.6408.201.1.1 | ScalaraimosSystemAvailability | read-only | current | aimosSystemAvailability of type SystemAvailability gives information about system login possibility. The required value to be able to login is accessible(1). T… |
| 1.3.6.1.4.1.6408.201.1.2 | ScalaraimosCommunity | read-only | current | aimosCommunity of type Community issues a Community-Name required for the communication with the A.I.M.O.S. SNMP Agent. The Community public only allows access… |
| 1.3.6.1.4.1.6408.201.1.3 | ScalaraimosCommunityLength | read-write | current | aimosCommunityLength is an Unsigned32 value in the range of 1 to 40 which states the length of community names being generated on reading of aimosCommunity. Th… |
| 1.3.6.1.4.1.6408.201.1.4 | ScalaraimosMinPasswordLength | read-write | current | aimosMinPasswordLength is an Unsigned32 value in the range of 5 to 40 which states the requirement for the length of passwords. The provider is allowed to adju… |
| 1.3.6.1.4.1.6408.201.2 | IdentityaimosLogin | current | The aimosLogin branch carries the leafs for logging in as a specific user. As above-mentioned access to the branch aimosLogin is only permitted with SNMP commu… | |
| 1.3.6.1.4.1.6408.201.2.1 | ScalaraimosLoginUserName | read-write | current | aimosLoginUserName of type UserName is provided to record the username for login purposes. The username is a predefined user account or a user account created … |
| 1.3.6.1.4.1.6408.201.2.2 | ScalaraimosLoginPassword | read-write | current | aimosLoginPassword of type PasswordString serves to record the password of the user. Here, the user must enter the password assigned to the user account by one… |
| 1.3.6.1.4.1.6408.201.2.3 | ScalaraimosLoginState | read-write | current | The aimosLoginState of type LoginState is used in order to accomplish the login process, as its value is set to connected(1). If its value is set to disconnect… |
| 1.3.6.1.4.1.6408.201.2.4 | ScalaraimosLoginOrgID | read-only | current | aimosLoginOrgID of type OrgID contains the organisation ID of the organisation of the user after successful login. |
| 1.3.6.1.4.1.6408.201.2.5 | ScalaraimosLoginPhoneBookID | read-write | current | After a successful login the AIMOS SNMP Agent attempts to recognize the SNMP Managers aimosLoginPhonebookID by means of its IP Address. In case the aimosPhoneB… |
| 1.3.6.1.4.1.6408.201.3 | IdentityaimosObjects | current | The branch aimosObjects is accessible only after a successful login. | |
| 1.3.6.1.4.1.6408.201.3.1 | IdentityaimosSystemManagement | current | In this section, system-wide parameters are described. Only the provider is responsible for and allowed to change most of the contents of the listed MIB branch… | |
| 1.3.6.1.4.1.6408.201.3.1.1 | ScalaraimosMIBVersion | read-only | current | This object is a read-only value of type Version representing the version of the MIB file. |
| 1.3.6.1.4.1.6408.201.3.1.2 | ScalaraimosAgentVersion | read-only | current | This object is a read-only value of type Version showing the software version of the A.I.M.O.S. SNMP Agent. |
| 1.3.6.1.4.1.6408.201.3.1.3 | ScalaraimosOMCConnectorVersion | read-only | current | This object is a read-only value of type Version displaying the software version of the OMC Connector. |
| 1.3.6.1.4.1.6408.201.3.1.4 | ScalaraimosTrapOID | accessible-for-notify | current | This object of type OBJECT IDENTIFIER references the OID of the corresponding trap type listed in aimosNotifications, if aimosPhoneBookInterfaceType is set to … |
| 1.3.6.1.4.1.6408.201.3.1.5 | ScalaraimosOMCSDN | read-write | current | This object of type SDN is the system distinguished name of the OMC which is designated to uniquely identify this OMC within an organisation. E.g.: The third O… |
| 1.3.6.1.4.1.6408.201.3.1.6 | ScalaraimosOMCName | read-write | current | This object of type Text with up to 40 characters is provided to assign a free definable name for the OMC, e.g. 'A.I.M.O.S. OMC - North'. It makes only sense i… |
| 1.3.6.1.4.1.6408.201.3.1.7 | ScalaraimosTimeFormat | read-write | current | This object of type TimeFormat determines of how date and time values of type VariableTime (e.g. aimosAlarmListEventTime) will be published by the SNMP Agent. … |
| 1.3.6.1.4.1.6408.201.3.1.8 | ScalaraimosPasswordExpirationPeriod | read-write | current | This object of type Unsigned32 within a range from 0 to 365 days decides the period of days after that passwords will expire. A value of 0 indicates, that the … |
| 1.3.6.1.4.1.6408.201.3.1.9 | ScalaraimosPasswordReuseCounter | read-write | current | This object of type Unsigned32 with a range from 1 to 255 denotes the number of distinguished passwords, that must be used, before a specific one can be repeat… |
| 1.3.6.1.4.1.6408.201.3.1.10 | ScalaraimosPasswordStandard | read-write | current | This object of type PasswordStandard determines if any numeric or special character is required in valid password creation. Existing passwords are not affected… |
| 1.3.6.1.4.1.6408.201.3.1.11 | ScalaraimosSessionTimeout | read-write | current | A Session is rejected after a certain time of inactivity. This object provides the means to adjust this period in minutes. Set this object to zero in order to … |
| 1.3.6.1.4.1.6408.201.3.1.12 | ScalaraimosOMCConnectorAddress | read-write | current | This object contains the IP address and the port that serves to access the OMC Connector. This information is required for creating Master Controllers. The val… |
| 1.3.6.1.4.1.6408.201.3.1.13 | ScalaraimosCurrentTime | read-only | current | This object of type VariableTime is used in heartbeat notifications and states the heartbeat notifications event time. This object also states the current time… |
| 1.3.6.1.4.1.6408.201.3.2 | IdentityaimosUserManagement | current | The user management contains all access authorisation related data of organisations and its user accounts. Each organisation may have user accounts. An user ac… | |
| 1.3.6.1.4.1.6408.201.3.2.1 | TableaimosOrgTable | not-accessible | current | Informations about organizations. A organization is a company having a relationship with A.I.M.O.S.. Relationship can be one of the following: - manufacturer -… |
| 1.3.6.1.4.1.6408.201.3.2.1.1 | RowaimosOrgEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.2.1.1.1 | ColumnaimosOrgID | read-only | current | This object is a Mikom provided world-wide unique identification number of an organisation of type OrgID. |
| 1.3.6.1.4.1.6408.201.3.2.1.1.2 | ColumnaimosOrgName | read-write | current | This object offers the possibility to designate the organisation mentioned in aimosOrgID. Set this value to 'delete' (without quotation marks) in order to dele… |
| 1.3.6.1.4.1.6408.201.3.2.1.1.4 | ColumnaimosOrgText | read-write | current | This object gives each organisation the possibility to configure a piece of text. |
| 1.3.6.1.4.1.6408.201.3.2.1.1.5 | ColumnaimosOrgLevel | read-only | current | This object of type OrgLevel denotes the role of the organisation. Possible values are manufacturer(0), provider(1) and telco(2). |
| 1.3.6.1.4.1.6408.201.3.2.1.1.6 | ColumnaimosOrgMCC | read-only | current | This object of type MCC is the mobile country code of a TelCo organisation. Manufacturer and provider have the MCC of its country. |
| 1.3.6.1.4.1.6408.201.3.2.1.1.7 | ColumnaimosOrgMNC | read-only | current | This object of type MNC is the mobile network code of a TelCo organisation. Manufacturer and provider have a MNC of 0 (zero). |
| 1.3.6.1.4.1.6408.201.3.2.1.1.8 | ColumnaimosOrgActive | read-write | current | This object sets the activity state of an organisation. An organisation account is activated by writing true and deactivated by writing false to this object. U… |
| 1.3.6.1.4.1.6408.201.3.2.1.1.9 | ColumnaimosOrgDNSeparator | read-write | current | This object of type DistinguishedNameSeparator separates the Distinguished Names into object type and object instance. E.g.: . 3GPP recommends equality mark (R… |
| 1.3.6.1.4.1.6408.201.3.2.1.1.10 | ColumnaimosOrgDNConcatenator | read-write | current | This object of type DistinguishedNameHierarchySymbol divides System Distinguished Names in its parts, the Relative Distinguished Names. E.g.: . 3GPP recommends… |
| 1.3.6.1.4.1.6408.201.3.2.1.1.11 | ColumnaimosOrgCCConcatenator | read-write | current | This object of type CableCodeConcatenator is used in aimosAlarmListCustomerCableInfo for concatenation of Cable Codes. Mikom default is a comma. |
| 1.3.6.1.4.1.6408.201.3.2.1.1.12 | ColumnaimosOrgActiveWorkShiftID | read-write | current | This object denotes the active work shift for delegation of alarms. The description for aimosWorkShiftTable contains more about work shifts. |
| 1.3.6.1.4.1.6408.201.3.2.1.1.13 | ColumnaimosOrgNextUserID | read-only | current | Provides the aimosUserID to be used in creating a new user account (aimosUserTable). |
| 1.3.6.1.4.1.6408.201.3.2.1.1.14 | ColumnaimosOrgNextWorkShiftID | read-only | current | Provides the aimosWorkShiftID to be used in creating a new work shift (aimosWorkShiftTable). |
| 1.3.6.1.4.1.6408.201.3.2.1.1.15 | ColumnaimosOrgNextAlarmRecipientListID | read-only | current | Provides the aimosAlarmRecipientListID to be used in creating a new alarm recipient list (aimosAlarmRecipientListTable). |
| 1.3.6.1.4.1.6408.201.3.2.1.1.16 | ColumnaimosOrgNextPhoneBookID | read-only | current | Provides the aimosPhoneBookID to be used in creating a new phone book entry (aimosPhoneBookTable). |
| 1.3.6.1.4.1.6408.201.3.2.2 | TableaimosUserTable | not-accessible | current | This table holds user related data. A user is a employee of a organization having an login account. This table is indexed by aimosOrgID and aimosUserID. Nevert… |
| 1.3.6.1.4.1.6408.201.3.2.2.1 | RowaimosUserEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.2.2.1.1 | ColumnaimosUserID | read-only | current | This object is numbered consecutively. aimosOrgNextUserID tells you the value to be used in row/user creation. |
| 1.3.6.1.4.1.6408.201.3.2.2.1.2 | ColumnaimosUserName | read-write | current | This object of type UserName hosts the users name. A user name can be used once in the OMC. Therefore it is advisable to prefix the user name with an organisat… |
| 1.3.6.1.4.1.6408.201.3.2.2.1.3 | ColumnaimosUserPassword | read-write | current | This object of type PasswordString is the password for an user account required in order to login into the OMC. The default password is start. During the first… |
| 1.3.6.1.4.1.6408.201.3.2.2.1.4 | ColumnaimosUserText | read-write | current | This object of type Text gives the possibility to configure a piece of text. |
| 1.3.6.1.4.1.6408.201.3.2.2.1.5 | ColumnaimosUserRoleID | read-write | current | With this object a certain role is assigned to a user account. Thus, via the table aimosRoleRightTable the User is granted the rights that are assigned to this… |
| 1.3.6.1.4.1.6408.201.3.2.2.1.6 | ColumnaimosUserActive | read-write | current | This object activates and deactivates an user account. If set to true the account is active and the user is able to log in, otherwise (false) no log in is poss… |
| 1.3.6.1.4.1.6408.201.3.2.2.1.7 | ColumnaimosUserPasswordAge | read-only | current | This object states the time when the password was most recently changed. |
| 1.3.6.1.4.1.6408.201.3.2.3 | ScalaraimosNextRoleID | read-only | current | This object is used in order to produce new roles within the aimosRoleTable. Its value has to be used as the identifier (aimosRoleID) of the new role. |
| 1.3.6.1.4.1.6408.201.3.2.4 | TableaimosRoleTable | not-accessible | current | Access control is made using roles. A role is a synonym for a certain combination of read and write access rights (AccessRight) to certain areas (RightArea). A… |
| 1.3.6.1.4.1.6408.201.3.2.4.1 | RowaimosRoleEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.2.4.1.1 | ColumnaimosRoleID | read-only | current | This object is numbered consecutively. Zero value is not allowed. aimosNextRoleID tells you the ID to be used in row creation. |
| 1.3.6.1.4.1.6408.201.3.2.4.1.2 | ColumnaimosRoleName | read-write | current | This object contains a name for the role with up to 40 characters. The table entry is deleted by setting this value to delete. |
| 1.3.6.1.4.1.6408.201.3.2.5 | TableaimosRoleRightTable | not-accessible | current | Access control is made using roles. A role is a synonym for a certain combination of read and write access rights (AccessRight) to certain areas (RightArea). A… |
| 1.3.6.1.4.1.6408.201.3.2.5.1 | RowaimosRoleRightEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.2.5.1.1 | ColumnaimosRoleRightArea | read-only | current | This object of type RightArea determines the right area arised from the controller software to be attached to a particular role identified by the index object … |
| 1.3.6.1.4.1.6408.201.3.2.5.1.2 | ColumnaimosRoleRightAccess | read-write | current | This object of type AccessRight determines whether read, write or no access to a specific RightArea has to be assigned to the affected role. Write access inclu… |
| 1.3.6.1.4.1.6408.201.3.2.6 | ScalaraimosInitiallyMasterLoginUserName | read-write | current | When a new Master Controller is created by making a new entry into the table aimosMasterUnitTable, the A.I.M.O.S. SNMP Agent requires a pre-setting for the obj… |
| 1.3.6.1.4.1.6408.201.3.2.7 | ScalaraimosInitiallyMasterLoginPassword | read-write | current | When a new Master Controller is created by making a new entry into the table aimosMasterUnitTable, the A.I.M.O.S. SNMP Agent requires a pre-setting for the obj… |
| 1.3.6.1.4.1.6408.201.3.3 | IdentityaimosBandManagement | current | Band Management is provided for allocation of radio frequencies to mobile network companies (TelCo's). | |
| 1.3.6.1.4.1.6408.201.3.3.1 | TableaimosBandTable | not-accessible | current | This table, indexed by aimosBandID, configures the characteristics of each RF band. This set up is done by Mikom. Insert rows: must only be done by Mikom Delet… |
| 1.3.6.1.4.1.6408.201.3.3.1.1 | RowaimosBandEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.3.1.1.1 | ColumnaimosBandID | read-only | current | This object of type NetworkStandard determines the network standard of the band to which this entry belongs to. |
| 1.3.6.1.4.1.6408.201.3.3.1.1.2 | ColumnaimosBandDLmin | read-only | current | This object of type FrequencyRange is the lowest DL frequency (kHz) possible in a specific band. |
| 1.3.6.1.4.1.6408.201.3.3.1.1.3 | ColumnaimosBandDLmax | read-only | current | This object of type FrequencyRange is the highest DL frequency (kHz) possible in a specific band. |
| 1.3.6.1.4.1.6408.201.3.3.1.1.4 | ColumnaimosBandULFrequencyGap | read-only | current | This object of type Unsigned32 with a range from 10000 to 95000 represents the frequency gap in kHz between UL and DL. Uplink frequency = downlink frequency - … |
| 1.3.6.1.4.1.6408.201.3.3.1.1.5 | ColumnaimosBandULChannelGap | read-only | current | This object of type ARFCN represents the ARFCN gap between UL and DL. Uplink ARFCN = downlink ARFCN - gap. |
| 1.3.6.1.4.1.6408.201.3.3.2 | TableaimosBandCalculationTable | not-accessible | current | Frequency calculation for any ARFCN can be done by the following formula: fDL(ARFCN) = fStart + fBandWidth * (ARFCN-aOffset) This table contains the informatio… |
| 1.3.6.1.4.1.6408.201.3.3.2.1 | RowaimosBandCalculationEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.3.2.1.1 | ColumnaimosBandCalculationID | read-only | current | Enumerated consecutively. |
| 1.3.6.1.4.1.6408.201.3.3.2.1.2 | ColumnaimosBandCalculationMin | read-only | current | First ARFCN for wich the aimosBandCalculationFormula-leafs are valid. |
| 1.3.6.1.4.1.6408.201.3.3.2.1.3 | ColumnaimosBandCalculationMax | read-only | current | Last ARFCN for wich the aimosBandCalculationFormula-leafs are valid. |
| 1.3.6.1.4.1.6408.201.3.3.2.1.4 | ColumnaimosBandCalculationFormulaStart | read-only | current | You can calculate the frequency for any ARFCN with the following formula: fDL(ARFCN) = aimosBandCalculationFormulaStart + aimosBandCalculationFormulaGap * (ARF… |
| 1.3.6.1.4.1.6408.201.3.3.2.1.5 | ColumnaimosBandCalculationFormulaBandWidth | read-only | current | You can calculate the frequency for any ARFCN with the following formula: fDL(ARFCN) = aimosBandCalculationFormulaStart + aimosBandCalculationFormulaGap * (ARF… |
| 1.3.6.1.4.1.6408.201.3.3.2.1.6 | ColumnaimosBandCalculationFormulaOffset | read-only | current | You can calculate the frequency for any ARFCN with the following formula: fDL(ARFCN) = aimosBandCalculationFormulaStart + aimosBandCalculationFormulaGap * (ARF… |
| 1.3.6.1.4.1.6408.201.3.3.3 | TableaimosLicenseeTable | not-accessible | current | This table is indexed by aimosOrgID, aimosBandID and aimosLicenseeFirstARFCN and shows information about frequencies licensed by Mobile Network Providers. Inse… |
| 1.3.6.1.4.1.6408.201.3.3.3.1 | RowaimosLicenseeEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.3.3.1.1 | ColumnaimosLicenseeFirstARFCN | read-only | current | This object of type ARFCN is the first ARFCN of an licensed interval. The size of an ARFCN interval is specified by aimosLicenseeARFCNCount. |
| 1.3.6.1.4.1.6408.201.3.3.3.1.2 | ColumnaimosLicenseeARFCNCount | read-write | current | this object of type ARFCN represents the size of each ARFCN interval. The last ARFCN of an ARFCN interval is calculated by the following formula: last ARFCN = … |
| 1.3.6.1.4.1.6408.201.3.3.4 | TableaimosFrequencyTable | not-accessible | current | This table is indexed by aimosBandID and aimosFrequencyARFCN and tells you per radio frequency channel number its radio frequency and licensee (identified by i… |
| 1.3.6.1.4.1.6408.201.3.3.4.1 | RowaimosFrequencyEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.3.4.1.1 | ColumnaimosFrequencyARFCN | read-only | current | This object of type ARFCN is the index of this table. |
| 1.3.6.1.4.1.6408.201.3.3.4.1.2 | ColumnaimosFrequencyValue | read-only | current | This object of type FrequencyRange returns the frequency in kHz for aimosFrequencyARFCN. |
| 1.3.6.1.4.1.6408.201.3.3.4.1.3 | ColumnaimosFrequencyOwner | read-only | current | This object of type OrgID returns the organisation ID of the TelCo owning the license for this frequency/ARFCN. |
| 1.3.6.1.4.1.6408.201.3.3.5 | TableaimosARFCNTable | not-accessible | current | This table is indexed by aimosBandID and aimosARFCNFrequency and tells you per radio frequency its radio frequency channel number and licensee (identified by i… |
| 1.3.6.1.4.1.6408.201.3.3.5.1 | RowaimosARFCNEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.3.5.1.1 | ColumnaimosARFCNFrequency | read-only | current | This object of type FrequencyRange is the index (kHz) of this table. |
| 1.3.6.1.4.1.6408.201.3.3.5.1.2 | ColumnaimosARFCNValue | read-only | current | This object of type ARFCN returns the ARFCN that corresponds to aimosARFCNFrequency. |
| 1.3.6.1.4.1.6408.201.3.3.5.1.3 | ColumnaimosARFCNOwner | read-only | current | This object of type OrgID returns the organisation ID of the TelCo owning the license for this ARFCN/frequency. |
| 1.3.6.1.4.1.6408.201.3.4 | IdentityaimosAlarmManagement | current | This is a short introduction in order to help you understand how the A.I.M.O.S. SNMP Agent realises SNMP alarm forwarding. When the A.I.M.O.S. SNMP Agent is in… | |
| 1.3.6.1.4.1.6408.201.3.4.1 | ScalaraimosNextAlarmGroupID | read-only | current | This object is needed in addition of alarm groups to the aimosAlarmGroupTable. Its value has to be used as the identifier (aimosAlarmGroupID) of the new alarm … |
| 1.3.6.1.4.1.6408.201.3.4.2 | TableaimosAlarmGroupTable | not-accessible | current | This table is indexed by aimosAlarmGroupID and lists the alarm groups available in the system. Alarm groups provides the means to collect alarms with similar c… |
| 1.3.6.1.4.1.6408.201.3.4.2.1 | RowaimosAlarmGroupEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.2.1.1 | ColumnaimosAlarmGroupID | read-only | current | This object is numbered consecutively. aimosNextAlarmGroupID tells you the ID to be used in row creation. |
| 1.3.6.1.4.1.6408.201.3.4.2.1.2 | ColumnaimosAlarmGroupName | read-write | current | This object contains a name for the alarm group with up to 50 characters. Set this value to 'delete' (without quotation marks) in order to delete this table en… |
| 1.3.6.1.4.1.6408.201.3.4.3 | TableaimosAlarmGroupAllowedOrgTable | not-accessible | current | This table serves to specify the organisations that will be authorised to receive alarms of a certain alarm group. Organisations not listed in this table canno… |
| 1.3.6.1.4.1.6408.201.3.4.3.1 | RowaimosAlarmGroupAllowedOrgEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.3.1.1 | ColumnaimosAlarmGroupAllowedOrgActive | read-write | current | This object is used for row creation and deletion. An existing table entry denotes, that the corresponding organisation is allowed to receive alarms collected … |
| 1.3.6.1.4.1.6408.201.3.4.4 | TableaimosAlarmConfigTable | not-accessible | current | With this table, indexed by aimosAlarmID, alarms can be configured. E.g. the Severity or the assignment to a certain alarm group can be specified here. Insert … |
| 1.3.6.1.4.1.6408.201.3.4.4.1 | RowaimosAlarmConfigEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.4.1.1 | ColumnaimosAlarmID | read-only | current | The aimosAlarmID of type AlarmID uniquely identifies the type of alarm. |
| 1.3.6.1.4.1.6408.201.3.4.4.1.2 | ColumnaimosAlarmDescription | read-only | current | This object holds a short explanation of the type of alarm. |
| 1.3.6.1.4.1.6408.201.3.4.4.1.3 | ColumnaimosAlarmEventType | read-only | current | The aimosAlarmEventType of type EventType categorises the alarm. |
| 1.3.6.1.4.1.6408.201.3.4.4.1.4 | ColumnaimosAlarmDefaultSeverity | read-write | current | This object of type Severity denotes the default severity of an alarm. Use the value indeterminate(0) in order to disable the alarm forwarding for this kind of… |
| 1.3.6.1.4.1.6408.201.3.4.4.1.5 | ColumnaimosAlarmSeverityMin | read-only | current | This object of type Severity determines the at least allowed configurable severity in aimosAlarmDefaultSeverity and aimosAlarmSeverityRangeTable. |
| 1.3.6.1.4.1.6408.201.3.4.4.1.6 | ColumnaimosAlarmAlarmGroupID | read-write | current | This object holds the Alarm Group assignment (aimosAlarmGroupID). Changes, which are made here, affect all organizations. That's why TelCo's are not allowed to… |
| 1.3.6.1.4.1.6408.201.3.4.4.1.7 | ColumnaimosAlarmClearMode | read-write | current | This object of type ClearMode informs you of how an alarm gets cleared. Changes, which are made here, affect all organizations. That's why TelCo's are not allo… |
| 1.3.6.1.4.1.6408.201.3.4.5 | TableaimosAlarmSeverityRangeTable | not-accessible | deprecated | This table holds organisation specific data of alarm severity configuration. Insert rows: set aimosAlarmSeverityRangeSeverity.<aimosOrgID>.<aimosAlarmID>. <aim… |
| 1.3.6.1.4.1.6408.201.3.4.5.1 | RowaimosAlarmSeverityRangeEntry | not-accessible | deprecated | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.5.1.1 | ColumnaimosAlarmSeverityRangeMinValue | read-only | deprecated | Low value causing a defined severity. |
| 1.3.6.1.4.1.6408.201.3.4.5.1.2 | ColumnaimosAlarmSeverityRangeMaxValue | read-only | deprecated | High value causing a defined severity. |
| 1.3.6.1.4.1.6408.201.3.4.5.1.3 | ColumnaimosAlarmSeverityRangeSeverity | read-write | deprecated | aimosAlarmSeverityRangeSeverity of type Severity holds the severity to be used in alarm notifications if the alarm value is within the range from aimosAlarmSev… |
| 1.3.6.1.4.1.6408.201.3.4.6 | TableaimosWorkShiftTable | not-accessible | current | Alarm distribution depends on work shifts: . This table holds the available work shift ID's and names. . aimosOrgActiveWorkShiftID determines the active work s… |
| 1.3.6.1.4.1.6408.201.3.4.6.1 | RowaimosWorkShiftEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.6.1.1 | ColumnaimosWorkShiftID | read-only | current | This object is numbered consecutively. aimosOrgNextWorkShiftID tells you the ID to be used in row creation. |
| 1.3.6.1.4.1.6408.201.3.4.6.1.2 | ColumnaimosWorkShiftName | read-write | current | This object contains a name for the work shift with up to 40 characters. Set this value to 'delete' (without quotation marks) in order to delete this table ent… |
| 1.3.6.1.4.1.6408.201.3.4.6.1.3 | ColumnaimosWorkShiftHeartbeatInterval | read-write | current | This object is intended to specify the interval in minutes, after that the A.I.M.O.S. SNMP Agent will emit a heartbeat notification to one or more SNMP Manager… |
| 1.3.6.1.4.1.6408.201.3.4.6.1.4 | ColumnaimosWorkShiftHeartbeatRecipientList | read-write | current | This object is intended to specify the Alarm Recipient List which has to be used if the A.I.M.O.S. SNMP Agent emits heartbeat notifications. Each member of the… |
| 1.3.6.1.4.1.6408.201.3.4.7 | TableaimosAlarmDistributionPlanTable | not-accessible | current | This table, indexed by aimosOrgID, aimosAlarmGroupID and aimosWorkShiftID, holds the alarm recipient list to be used for sending alarms of a certain Alarm Grou… |
| 1.3.6.1.4.1.6408.201.3.4.7.1 | RowaimosAlarmDistributionPlanEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.7.1.1 | ColumnaimosAlarmDistributionPlanRecipientListID | read-write | current | This objects value is the recipient lists ID (aimosAlarmRecipientListID) that will be bound up with the aimosAlarmGroupID and aimosWorkShiftID for aimosOrgID. … |
| 1.3.6.1.4.1.6408.201.3.4.8 | TableaimosAlarmRecipientListTable | not-accessible | current | This table holds the names and IDs of available alarm recipient lists for each organization. It is indexed by aimosOrgID and aimosAlarmRecipientListID. Insert … |
| 1.3.6.1.4.1.6408.201.3.4.8.1 | RowaimosAlarmRecipientListEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.8.1.1 | ColumnaimosAlarmRecipientListID | read-only | current | This object is numbered consecutively within one organisation. aimosOrgNextAlarmRecipientListID tells you the value to be used in alarm recipient list creation… |
| 1.3.6.1.4.1.6408.201.3.4.8.1.2 | ColumnaimosAlarmRecipientListName | read-write | current | This object is just a name with a maximum length of 50 characters for the alarm recipient list. Set this value to 'delete' (without quotation marks) in order t… |
| 1.3.6.1.4.1.6408.201.3.4.11 | TableaimosPhoneBookTable | not-accessible | current | This table gives IP addresses and IP ports of alarm recipients (SNMP Manager) a name and classifies its communication type. Insert rows: set aimosPhoneBookAddr… |
| 1.3.6.1.4.1.6408.201.3.4.11.1 | RowaimosPhoneBookEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.11.1.1 | ColumnaimosPhoneBookID | read-only | current | This object is numbered consecutively within one organisation. aimosOrgNextPhoneBookID tells you the value to be used in phone book entry creation. |
| 1.3.6.1.4.1.6408.201.3.4.11.1.2 | ColumnaimosPhoneBookName | read-write | current | This object of type PhoneBookEntry is a name for the phone book entry helping to disclose its identity. This name should be unique. |
| 1.3.6.1.4.1.6408.201.3.4.11.1.3 | ColumnaimosPhoneBookAddress | read-write | current | This object of type IPAddressAndPort hold the IP address and IP port number. The port number may be omitted in set requests, if the port number is the default … |
| 1.3.6.1.4.1.6408.201.3.4.11.1.5 | ColumnaimosPhoneBookActive | read-write | current | This object is used in order to deactivate a phone book entry for a short period of time. Inactive phone book entries are excluded from alarm distribution even… |
| 1.3.6.1.4.1.6408.201.3.4.11.1.6 | ColumnaimosPhoneBookLastNotificationID | read-write | current | This object denotes the notification ID used in the most recent trap for the specific SNMP Manager. The NotificationID of the next trap that is generated will … |
| 1.3.6.1.4.1.6408.201.3.4.11.1.7 | ColumnaimosPhoneBookAlarmListResync | read-write | current | This object of type OperationMode is provided to give each SNMP Manager the ability to synchronise its alarm table. Setting this value to start(5) will start t… |
| 1.3.6.1.4.1.6408.201.3.4.11.1.8 | ColumnaimosPhoneBookInterfaceType | read-write | current | This object of type InterfaceType is provided in order to define the kind of alarm forwarding. Leave this object on its default value unless you want to force … |
| 1.3.6.1.4.1.6408.201.3.4.11.1.9 | ColumnaimosPhoneBookAckCapability | read-write | current | This object is provided in order to state the SNMP Managers ability to perform an acknowledgement. . If this object is set to true (default), then the SNMP Age… |
| 1.3.6.1.4.1.6408.201.3.4.11.1.10 | ColumnaimosPhoneBookTimeDisplayFormat | read-write | current | This object of type TimeDisplayFormat is provided in order to define ofhow date and time values (in objects of type VariableTime) inquired by an GET request or… |
| 1.3.6.1.4.1.6408.201.3.4.11.1.11 | ColumnaimosPhoneBookGeographicPositionFormat | read-write | current | This object defines the format to be used for objects with textual convention GPSPosition. These are as follows: . aimosAlarmListRaiseLatitude . aimosAlarmList… |
| 1.3.6.1.4.1.6408.201.3.4.11.1.12 | ColumnaimosPhoneBookRecognitionTraps | read-write | current | This object provides means to state whether or not the SNMP Manager desires the SNMP Agent to sent a aimosAlarmRecognized trap in case an alarms recognition st… |
| 1.3.6.1.4.1.6408.201.3.4.12 | TableaimosAlarmRecipientListMemberTable | not-accessible | current | This table determines the members of a certain alarm recipient list. All active members of an Alarm Recipient List receive the alarm notifications assigned to … |
| 1.3.6.1.4.1.6408.201.3.4.12.1 | RowaimosAlarmRecipientListMemberEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.12.1.1 | ColumnaimosAlarmRecipientListMemberActive | read-write | current | This object is used for row creation and deletion. Due to the way of row deletion there will never be an object in this table having a value of false. An exist… |
| 1.3.6.1.4.1.6408.201.3.4.13 | TableaimosAlarmTrapTable | not-accessible | current | This table is indexed by aimosOrgID, aimosAlarmTrapID and aimosAlarmListID and contains a list of all traps sent out by the agent to a specific SNMP Manager id… |
| 1.3.6.1.4.1.6408.201.3.4.13.1 | RowaimosAlarmTrapEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.13.1.1 | ColumnaimosAlarmTrapID | read-only | current | This object is an unique identifier for a trap on SNMP Agent side and is used in alarm acknowledgement. Even if its value is consecutive numbered on agent side… |
| 1.3.6.1.4.1.6408.201.3.4.13.1.2 | ColumnaimosAlarmTrapNotificationID | read-only | current | This object is incremented consecutively for each notification sent out to a particular SNMP Manager. Thus every SNMP Manager (identified by its phone book ent… |
| 1.3.6.1.4.1.6408.201.3.4.13.1.3 | ColumnaimosAlarmTrapPhonebookID | read-only | current | This object is the SNMP Managers aimosPhoneBookID to which the notification was directed to. |
| 1.3.6.1.4.1.6408.201.3.4.13.1.4 | ColumnaimosAlarmTrapAcknowledgementState | read-write | current | This object of type AcknowledgementState states whether or not the alarm was acknowledged. It is the only writeable value in this table. Acknowledgement will b… |
| 1.3.6.1.4.1.6408.201.3.4.13.1.5 | ColumnaimosAlarmTrapAcknowledgementUser | read-only | current | This object holds the user who has acknowledged the alarm. This object is empty if the alarm is not yet acknowledged. |
| 1.3.6.1.4.1.6408.201.3.4.13.1.6 | ColumnaimosAlarmTrapAcknowledgementTime | read-only | current | This object of type VariableTime holds the time of acknowledgement. This object is empty if the alarm is not yet acknowledged. |
| 1.3.6.1.4.1.6408.201.3.4.14 | TableaimosAlarmListTable | not-accessible | current | This table contains a list of active alarms. This table is indexed by aimosOrgID and aimosAlarmListID; i.e. the table is organisation specific and, thus has en… |
| 1.3.6.1.4.1.6408.201.3.4.14.1 | RowaimosAlarmListEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.14.1.1 | ColumnaimosAlarmListID | read-only | current | This object is the consecutive numbering of all alarm notifications of the A.I.M.O.S. SNMP Agent forwarded to any manager. A notification forwarded to more tha… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.2 | ColumnaimosAlarmListAlarmEventID | read-only | current | This object's Unsigned32 value is incremented by one for each alarm notification except aimosAlarmChanged and aimosAlarmCleared. Alarm changed notifications an… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.3 | ColumnaimosAlarmListAlarmID | read-only | current | This object of type AlarmID designates the alarm kind. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.4 | ColumnaimosAlarmListEventType | read-only | current | The Event Type categorises the alarm. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.5 | ColumnaimosAlarmListEventTime | read-only | current | This object of type VariableTime states when the alarm condition appeared or (in the case of an aimosAlarmCleared notification) when the alarm condition is gon… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.6 | ColumnaimosAlarmListProbableCause | read-only | current | This object of type ProbableCause defines further qualification of an alarm than aimosAlarmListEventType. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.7 | ColumnaimosAlarmListSpecificProblem | read-only | current | This object of type SpecificProblem is a fault specific value used in order to classify the fault situation. It provides further qualification of the alarm tha… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.8 | ColumnaimosAlarmListSeverity | read-only | current | This object of type Severity defines severity levels, which provide an indication of how it is perceived that the capability of the managed object has been aff… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.9 | ColumnaimosAlarmListTrendIndication | read-only | current | This object of type TrendIndication specifies the current severity trend of the managed object. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.10 | ColumnaimosAlarmListAdditionalText | read-only | current | This object allows a free form text description to be reported. It contains a formatted description of the alarm and, should the occasion arise, includes alarm… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.11 | ColumnaimosAlarmListSDN | read-only | current | The System Distinguished Name uniquely identifies the unit within the system controlled by the OMC. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.12 | ColumnaimosAlarmListTrapInfo | read-only | current | This OID contains the Network Elements's TrapInfo |
| 1.3.6.1.4.1.6408.201.3.4.14.1.13 | ColumnaimosAlarmListComponentName | read-only | current | This OID contains the Network Elements's Component Name |
| 1.3.6.1.4.1.6408.201.3.4.14.1.14 | ColumnaimosAlarmListLocation | read-only | current | This OID contains the Network Elements's Location |
| 1.3.6.1.4.1.6408.201.3.4.14.1.15 | ColumnaimosAlarmListUniqueSystemID | read-only | current | This OID contains the Network Elements's Unique System ID |
| 1.3.6.1.4.1.6408.201.3.4.14.1.16 | ColumnaimosAlarmListClearReason | read-write | current | This OID gives information weather the alarm was cleared or not. If an alarm does not become automatically cleared (aimosAlarmClearMode is set to manualClear),… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.17 | ColumnaimosAlarmListClearTime | read-only | current | this object of type VariableTime states the time of the event specified in aimosAlarmListClearReason. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.18 | ColumnaimosAlarmListRaiseLatitude | read-only | current | this object was introduced in V 2.6.0 and states the Network Elements Latitude to the time the alarm was raised. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.19 | ColumnaimosAlarmListRaiseLongitude | read-only | current | this object was introduced in V 2.6.0 and states the Network Elements Longitude to the time the alarm was raised. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.20 | ColumnaimosAlarmListClearLatitude | read-only | current | this object was introduced in V 2.6.0 and states the Network Elements Latitude to the time the alarm was cleared. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.21 | ColumnaimosAlarmListClearLongitude | read-only | current | this object was introduced in V 2.6.0 and states the Network Elements Longitude to the time the alarm was cleared. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.22 | ColumnaimosAlarmListRecognitionState | read-write | current | This object of type RecognitionState states whether or not the alarm has been recognized. Together with aimosAlarmListClearReason these objects are the only wr… |
| 1.3.6.1.4.1.6408.201.3.4.14.1.23 | ColumnaimosAlarmListRecognitionUser | read-only | current | This object indicates the user who has recognized the alarm. This object is empty if the alarm is not recognized at all. |
| 1.3.6.1.4.1.6408.201.3.4.14.1.24 | ColumnaimosAlarmListRecognitionTime | read-only | current | This object of type VariableTime holds the time of recognition. This object is empty if the alarm is not recognized at all. |
| 1.3.6.1.4.1.6408.201.3.4.15 | TableaimosAlarmLogTable | not-accessible | current | This table is indexed by aimosOrgID, aimosAlarmTrapID and aimosAlarmListID and contains the list of cleared and acknowledged alarms. The data is the content of… |
| 1.3.6.1.4.1.6408.201.3.4.15.1 | RowaimosAlarmLogEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.4.15.1.1 | ColumnaimosAlarmLogPhoneBookID | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.2 | ColumnaimosAlarmLogNotificationID | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.3 | ColumnaimosAlarmLogAlarmEventID | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.4 | ColumnaimosAlarmLogAlarmID | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.5 | ColumnaimosAlarmLogEventType | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.6 | ColumnaimosAlarmLogEventTime | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.7 | ColumnaimosAlarmLogProbableCause | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.8 | ColumnaimosAlarmLogSpecificProblem | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.9 | ColumnaimosAlarmLogSeverity | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.10 | ColumnaimosAlarmLogTrendIndication | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.11 | ColumnaimosAlarmLogAdditionalText | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.12 | ColumnaimosAlarmLogSDN | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.13 | ColumnaimosAlarmLogTrapInfo | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.14 | ColumnaimosAlarmLogComponentName | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.15 | ColumnaimosAlarmLogLocation | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.16 | ColumnaimosAlarmLogUniqueSystemID | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.17 | ColumnaimosAlarmLogAcknowledgementUser | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.18 | ColumnaimosAlarmLogAcknowledgementTime | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.19 | ColumnaimosAlarmLogClearReason | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.20 | ColumnaimosAlarmLogClearTime | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.21 | ColumnaimosAlarmLogClearTrapID | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.22 | ColumnaimosAlarmLogClearNotificationID | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.23 | ColumnaimosAlarmLogClearAcknowledgementUser | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.24 | ColumnaimosAlarmLogClearAcknowledgementTime | read-only | current | See corresponding description in aimosAlarmTrapTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.25 | ColumnaimosAlarmLogRaiseLatitude | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.26 | ColumnaimosAlarmLogRaiseLongitude | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.27 | ColumnaimosAlarmLogClearLatitude | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.28 | ColumnaimosAlarmLogClearLongitude | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.29 | ColumnaimosAlarmLogRecognitionState | read-write | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.30 | ColumnaimosAlarmLogRecognitionUser | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.15.1.31 | ColumnaimosAlarmLogRecognitionTime | read-only | current | See corresponding description in aimosAlarmListTable. |
| 1.3.6.1.4.1.6408.201.3.4.16 | ScalaraimosAlarmForwardingType | read-write | current | This object of type AlarmForwardingType specifies if and in what way, alarm forwarding is to be carried out: . If this object is set to disabled(0), there is n… |
| 1.3.6.1.4.1.6408.201.3.4.17 | ScalaraimosAlarmAckExpectInterval | read-write | current | After having emitted an alarm notification, the SNMP Agent expects an acknowledgement within a certain interval. This period of time is adjustable by means of … |
| 1.3.6.1.4.1.6408.201.3.4.18 | ScalaraimosAlarmListRebuild | read-write | current | ATTENTION: Setting this objects value to start(5) will initiate an Alarm List Rebuild process. During this process ALL ALARM INFORMATION WILL BE DELETED ! The … |
| 1.3.6.1.4.1.6408.201.3.4.19 | ScalaraimosAlarmListResync | read-write | current | This object of type OperationMode is provided to give each SNMP Manager the ability to synchronise its alarm table. Setting this value to start(5) will start t… |
| 1.3.6.1.4.1.6408.201.3.5 | IdentityaimosUnitManagement | current | This area comprises all objects dealing with unit management. This introduction provides an explanation of its basic structures. For each unit type there is on… | |
| 1.3.6.1.4.1.6408.201.3.5.1 | ScalaraimosNextMasterID | read-only | current | This object of type MasterID is used in order to create new Master Unit table entries. Its value has to be used as the identifier (aimosMasterID) of the new Ma… |
| 1.3.6.1.4.1.6408.201.3.5.2 | TableaimosMasterUnitTable | not-accessible | current | This table contains hardware revision independent information's about Master Units including its Master Controller. A Master Unit consists of up to 127 Remote … |
| 1.3.6.1.4.1.6408.201.3.5.2.1 | RowaimosMasterUnitEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.2.1.1 | ColumnaimosMasterID | read-only | current | This object of type MasterID uniquely identifies the Master Controller within the OMC. aimosNextMasterID tells you the value to be used in row creation. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.2 | ColumnaimosMasterRDN | read-only | current | This object of type RDN shows the Relative Distinguished Name which consists of the object type and an object instance divided by the Distinguished Name Separa… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.3 | ColumnaimosMasterSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.4 | ColumnaimosMasterIdentNo | read-only | current | This object of type IdentNo carries the Mikom Identification Number of the Master Controller. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.5 | ColumnaimosMasterSerialNo | read-only | current | This object of type SerialNo represents the Mikom Serial Number of the Master Controller. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.6 | ColumnaimosMasterTrapInfo | read-write | current | This object of type Text lays down additional information to be provided with each notification sent to any SNMP Manager. The SNMP Agent makes this information… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.7 | ColumnaimosMasterLocation | read-write | current | This object of type Text is a textual description of the place, where the Master Unit is located. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.8 | ColumnaimosMasterAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.9 | ColumnaimosMasterMapXY | read-write | current | This object of type Coordinates carries co-ordinates of Master Unit location. |
| 1.3.6.1.4.1.6408.201.3.5.2.1.10 | ColumnaimosMasterOID | read-only | current | This object of type RowPointer provides the OID where to find hardware specific information. In the first release of A.I.M.O.S. this object will point to the a… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.11 | ColumnaimosMasterAddress | read-write | current | This object of type IPAddressAndPort provides the Master Controllers IP address and port number. When a new Master Controller was integrated into the network b… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.12 | ColumnaimosMasterState | read-write | current | This object of type MasterState indicates the state of the Master Controller's system integration and should always be properlySet(7). Immediately after the Ma… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.13 | ColumnaimosMasterGUID | read-only | current | This object of type GUID is a globally unambiguous name for the Master Controller. This is not redundant with regard to the aimosMasterID, for if a Master Cont… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.14 | ColumnaimosMasterLoginUserName | read-write | current | This object of type UserName is the user name (max. length is 20 characters) used by the OMC for establishing a login with the Master Controller. When a new ta… |
| 1.3.6.1.4.1.6408.201.3.5.2.1.15 | ColumnaimosMasterLoginPassword | read-write | current | This object of type ControllerPassword contains the password for establishing a login with the Master Controller. The password can be read but the A.I.M.O.S. S… |
| 1.3.6.1.4.1.6408.201.3.5.3 | TableaimosSubRackTable | not-accessible | current | This table contains hardware revision independent information's about the SubRack Master Unit. Insert rows: must only be done by system Delete rows: must only … |
| 1.3.6.1.4.1.6408.201.3.5.3.1 | RowaimosSubRackEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.3.1.1 | ColumnaimosSubRackID | read-only | current | This object of type SubRackID uniquely identifies the Sub Rack Master Unit within its parent, a Master Unit. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.2 | ColumnaimosSubRackRDN | read-only | current | This object of type RDN shows the Relative Distinguished Name which consists of the object type and an object instance divided by the Distinguished Name Separa… |
| 1.3.6.1.4.1.6408.201.3.5.3.1.3 | ColumnaimosSubRackSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.5.3.1.4 | ColumnaimosSubRackIdentNo | read-only | current | This object of type IdentNo carries the Mikom Identification Number of the Sub Rack Master Unit. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.5 | ColumnaimosSubRackSerialNo | read-only | current | This object of type SerialNo represents the Mikom Serial Number of the Sub Rack Mater Unit. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.6 | ColumnaimosSubRackTrapInfo | read-write | current | This object of type Text lays down additional information to be provided with each notification sent to any SNMP Manager. The SNMP Agent makes this information… |
| 1.3.6.1.4.1.6408.201.3.5.3.1.7 | ColumnaimosSubRackLocation | read-write | current | This object of type Text is a textual description of the place, where the Sub Rack Master Unit is located. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.8 | ColumnaimosSubRackAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.9 | ColumnaimosSubRackMapXY | read-write | current | This object of type Coordinates carries co-ordinates of Sub Rack Master Unit location. |
| 1.3.6.1.4.1.6408.201.3.5.3.1.10 | ColumnaimosSubRackOID | read-only | current | This object of type RowPointer provides the OID where to find hardware specific information. In the first release of A.I.M.O.S. this object will point to the a… |
| 1.3.6.1.4.1.6408.201.3.5.4 | TableaimosRemoteUnitTable | not-accessible | current | This table contains hardware revision independent information's about Remote Units. Insert rows: must only be done by system Delete rows: must only be done by … |
| 1.3.6.1.4.1.6408.201.3.5.4.1 | RowaimosRemoteUnitEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.4.1.1 | ColumnaimosRemoteID | read-only | current | This object of type RemoteID uniquely identifies the Remote Unit within the connected Sub Rack Master Unit. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.2 | ColumnaimosRemoteRDN | read-only | current | This object of type RDN shows the Relative Distinguished Name which consists of the object type and an object instance divided by the Distinguished Name Separa… |
| 1.3.6.1.4.1.6408.201.3.5.4.1.3 | ColumnaimosRemoteSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.5.4.1.4 | ColumnaimosRemoteIdentNo | read-only | current | This object of type IdentNo carries the Mikom Identification Number of the Remote Unit. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.5 | ColumnaimosRemoteSerialNo | read-only | current | This object of type SerialNo represents the Mikom Serial Number of the Remote Unit. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.6 | ColumnaimosRemoteTrapInfo | read-write | current | This object of type Text lays down additional information to be provided with each notification sent to any SNMP Manager. The SNMP Agent makes this information… |
| 1.3.6.1.4.1.6408.201.3.5.4.1.7 | ColumnaimosRemoteLocation | read-write | current | This object of type Text is a textual description of the place, where the Remote Unit is located. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.8 | ColumnaimosRemoteAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.9 | ColumnaimosRemoteMapXY | read-write | current | This object of type Coordinates carries co-ordinates of Remote Unit location. |
| 1.3.6.1.4.1.6408.201.3.5.4.1.10 | ColumnaimosRemoteOID | read-only | current | This object of type RowPointer provides the OID where to find hardware specific information. In the first release of A.I.M.O.S. this object will point to the a… |
| 1.3.6.1.4.1.6408.201.3.5.5 | TableaimosGSMNSOTable | not-accessible | current | This table contains hardware revision independent information's about GSM NSO's. Insert rows: must only be done by system Delete rows: must only be done by sys… |
| 1.3.6.1.4.1.6408.201.3.5.5.1 | RowaimosGSMNSOEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.5.1.1 | ColumnaimosGSMNSOID | read-only | current | This object of type NSOID uniquely identifies the GSM NSO within the connected Remote Unit. |
| 1.3.6.1.4.1.6408.201.3.5.5.1.2 | ColumnaimosGSMNSORDN | read-only | current | This object of type RDN shows the Relative Distinguished Name which consists of the object type and an object instance divided by the Distinguished Name Separa… |
| 1.3.6.1.4.1.6408.201.3.5.5.1.3 | ColumnaimosGSMNSOSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.5.5.1.4 | ColumnaimosGSMNSOIdentNo | read-only | current | This object of type IdentNo carries the Mikom Identification Number of the GSM NSO. |
| 1.3.6.1.4.1.6408.201.3.5.5.1.5 | ColumnaimosGSMNSOSerialNo | read-only | current | This object of type SerialNo represents the Mikom Serial Number of the GSM NSO. |
| 1.3.6.1.4.1.6408.201.3.5.5.1.6 | ColumnaimosGSMNSOTrapInfo | read-write | current | This object of type Text lays down additional information to be provided with each notification sent to any SNMP Manager. Since the GSM NSO is located in the R… |
| 1.3.6.1.4.1.6408.201.3.5.5.1.7 | ColumnaimosGSMNSOLocation | read-write | current | This object of type Text is a textual description of the place, where the GSM NSO is located. Since the GSM NSO is located in the Remote Unit, this object's va… |
| 1.3.6.1.4.1.6408.201.3.5.5.1.8 | ColumnaimosGSMNSOAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. |
| 1.3.6.1.4.1.6408.201.3.5.5.1.9 | ColumnaimosGSMNSOMapXY | read-write | current | This object of type Coordinates carries co-ordinates of GSM NSO location. |
| 1.3.6.1.4.1.6408.201.3.5.5.1.10 | ColumnaimosGSMNSOOID | read-only | current | This object of type RowPointer provides the OID where to find hardware specific information. In the first release of A.I.M.O.S. this object will point to the a… |
| 1.3.6.1.4.1.6408.201.3.5.5.1.11 | ColumnaimosGSMNSOOIDData | read-only | current | This object of type RowPointer shows the OID, which provides measurement data of GSM NSO. In the first release of A.I.M.O.S. this object will point to directly… |
| 1.3.6.1.4.1.6408.201.3.5.6 | TableaimosUMTSNSOTable | not-accessible | current | This table contains hardware revision independent information's about UMTS NSO's. Insert rows: must only be done by system Delete rows: must only be done by sy… |
| 1.3.6.1.4.1.6408.201.3.5.6.1 | RowaimosUMTSNSOEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.6.1.1 | ColumnaimosUMTSNSOID | read-only | current | This object of type NSOID uniquely identifies the UMTS NSO within the connected Remote Unit. |
| 1.3.6.1.4.1.6408.201.3.5.6.1.2 | ColumnaimosUMTSNSORDN | read-only | current | This object of type RDN shows the Relative Distinguished Name which consists of the object type and an object instance divided by the Distinguished Name Separa… |
| 1.3.6.1.4.1.6408.201.3.5.6.1.3 | ColumnaimosUMTSNSOSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.5.6.1.4 | ColumnaimosUMTSNSOIdentNo | read-only | current | This object of type IdentNo carries the Mikom Identification Number of the UMTS NSO. |
| 1.3.6.1.4.1.6408.201.3.5.6.1.5 | ColumnaimosUMTSNSOSerialNo | read-only | current | This object of type SerialNo represents the Mikom Serial Number of the UMTS NSO. |
| 1.3.6.1.4.1.6408.201.3.5.6.1.6 | ColumnaimosUMTSNSOTrapInfo | read-write | current | This object of type Text lays down additional information to be provided with each notification sent to any SNMP Manager. Since the UMTS NSO is located in the … |
| 1.3.6.1.4.1.6408.201.3.5.6.1.7 | ColumnaimosUMTSNSOLocation | read-write | current | This object of type Text is a textual description of the place, where the UMTS NSO is located. Since the UMTS NSO is located in the Remote Unit, this object's … |
| 1.3.6.1.4.1.6408.201.3.5.6.1.8 | ColumnaimosUMTSNSOAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. |
| 1.3.6.1.4.1.6408.201.3.5.6.1.9 | ColumnaimosUMTSNSOMapXY | read-write | current | This object of type Coordinates carries co-ordinates of UMTS NSO location. |
| 1.3.6.1.4.1.6408.201.3.5.6.1.10 | ColumnaimosUMTSNSOOID | read-only | current | This object of type RowPointer provides the OID where to find hardware specific information. In the first release of A.I.M.O.S. this object will point to the a… |
| 1.3.6.1.4.1.6408.201.3.5.6.1.11 | ColumnaimosUMTSNSOOIDData | read-only | current | This object of type RowPointer shows the OID, which provides measurement data of UMTS NSO. In the first release of A.I.M.O.S. this object will point to directl… |
| 1.3.6.1.4.1.6408.201.3.5.7 | ScalaraimosNextCableID | read-only | current | This object of type CableID has to be used in order to create new entries in aimosCableTable. The value has to be used as the identifier for new entries. |
| 1.3.6.1.4.1.6408.201.3.5.8 | TableaimosCableTable | not-accessible | current | This table contains information's about fibre-optic cables used in interconnection between Remote Units and SubRack Master Units. This information is transmitt… |
| 1.3.6.1.4.1.6408.201.3.5.8.1 | RowaimosCableEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.8.1.1 | ColumnaimosCableID | read-only | current | This object of type CableID is an unique identifier for cable table entries. aimosNextCableID tells you the value to be used in cable table entry creation. |
| 1.3.6.1.4.1.6408.201.3.5.8.1.2 | ColumnaimosCableCode | read-write | current | This value of type CableCode holds the textual identification / representation of a specific cable. Set this value to 'delete' (without quotation marks) in ord… |
| 1.3.6.1.4.1.6408.201.3.5.8.1.3 | ColumnaimosCableTrapInfo | read-write | current | In aimosCableTrapInfo of type Text a freely definable identification can be entered, by which the cable can be identified. This identifier is transmitted with … |
| 1.3.6.1.4.1.6408.201.3.5.8.1.4 | ColumnaimosCableLocation | read-write | current | This object of type Text is a textual description of the place, where the cable is located. Changes, which are made here, affect all organizations. That's why … |
| 1.3.6.1.4.1.6408.201.3.5.8.1.5 | ColumnaimosCableAnyText | read-write | current | This object of type Text gives the ability to store any unit related text. Changes, which are made here, affect all organizations. That's why TelCo's are not a… |
| 1.3.6.1.4.1.6408.201.3.5.9 | TableaimosCableUsageTable | not-accessible | current | This table contains information as to which cable or even which cores of a cable were used to connect a certain Sub Rack Master Unit to a certain Remote Unit. … |
| 1.3.6.1.4.1.6408.201.3.5.9.1 | RowaimosCableUsageEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.9.1.1 | ColumnaimosCableUsageRemoteUnitReference | read-only | current | This object is of type UnitReference and identifies the Remote Unit to which the current table entry does refer. |
| 1.3.6.1.4.1.6408.201.3.5.9.1.2 | ColumnaimosCableUsageID | read-only | current | This object determines the sequence of cables used in order to connect the Sub Rack Master Unit with a specific Remote Unit. The cable directly connected to th… |
| 1.3.6.1.4.1.6408.201.3.5.9.1.3 | ColumnaimosCableUsageCableID | read-write | current | This object of type CableID shows which cable was used to connect the Remote Unit identified by aimosCableUsageRemoteUnitReference with the SubRack Master Unit… |
| 1.3.6.1.4.1.6408.201.3.5.9.1.4 | ColumnaimosCableUsageFibreCode | read-write | current | This object of type CableCode can be used to identify the cores used in the cable. This identification can be taken over into the object aimosAlarmListCustomer… |
| 1.3.6.1.4.1.6408.201.3.5.9.1.5 | ColumnaimosCableUsageAlternativeTrapInfo | read-write | current | In aimosCableUsageAlternativeTrapInfo of type Text a freely definable identification for identifying cable and used core can be entered. This identification is… |
| 1.3.6.1.4.1.6408.201.3.5.13 | TableaimosMasterUnitV1Table | not-accessible | current | This table contains information's about Master Units with hardware revision 1. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.13.1 | RowaimosMasterUnitV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.13.1.1 | ColumnaimosMasterV1UnitReference | read-only | current | This object of type UnitReference is the first index of this table. It unambiguously identifies the unit, independent of its kind (Master Unit, Sub Rack Master… |
| 1.3.6.1.4.1.6408.201.3.5.13.1.2 | ColumnaimosMasterV1ValueSource | read-only | current | This object of type ValueSource is the second index in this table. It indicates, which value is to be addressed (actual, cached or desired value): . actual : A… |
| 1.3.6.1.4.1.6408.201.3.5.13.1.3 | ColumnaimosMasterV1HeartbeatInterval | read-write | current | Alternatively to a regular polling of the Master Controllers by an SNMP Manager, the Master Controller is capable of sending a regular 'I'm-alive-message' to t… |
| 1.3.6.1.4.1.6408.201.3.5.13.1.4 | ColumnaimosMasterV1HeartbeatOvertime | read-write | current | This object of type WeekMinutes offers the possibility to set a certain waiting time. This is required to compensate the differing latency periods of the Maste… |
| 1.3.6.1.4.1.6408.201.3.5.13.1.5 | ColumnaimosMasterV1HeartbeatTime | read-only | current | This object of type VariableTime provides the time when the Master Controller sent the last life sign. It does not make sense to read this value to an instance… |
| 1.3.6.1.4.1.6408.201.3.5.14 | TableaimosSubRackV1Table | not-accessible | current | This table contains information's about SubRack Master Units with hardware revision 1. Insert rows: must only be done by system Delete rows: must only be done … |
| 1.3.6.1.4.1.6408.201.3.5.14.1 | RowaimosSubRackV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.14.1.1 | ColumnaimosSubRackV1UnitReference | read-only | current | This object of type UnitReference is the first index of this table. It unambiguously identifies the unit, independent of its kind (Master Unit, Sub Rack Master… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.2 | ColumnaimosSubRackV1ValueSource | read-only | current | This object of type ValueSource is the second index in this table. It indicates, which value is to be addressed (actual, cached or desired value): . actual : A… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.3 | ColumnaimosSubRackV1AttenuationAge | read-write | current | In both the uplink (UL) and the downlink (DL) path for each of the three bands supported by the three amplifiers (1 to 3), the attenuation of the corresponding… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.4 | ColumnaimosSubRackV1AttenuationAmp1DL | read-write | current | Attenuation on amplifier 1 downlink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.5 | ColumnaimosSubRackV1AttenuationAmp1UL | read-write | current | Attenuation on amplifier 1 uplink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.6 | ColumnaimosSubRackV1AttenuationAmp2DL | read-write | current | Attenuation on amplifier 2 downlink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.7 | ColumnaimosSubRackV1AttenuationAmp2UL | read-write | current | Attenuation on amplifier 2 uplink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.8 | ColumnaimosSubRackV1AttenuationAmp3DL | read-write | current | Attenuation on amplifier 3 downlink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.9 | ColumnaimosSubRackV1AttenuationAmp3UL | read-write | current | Attenuation on amplifier 3 uplink. The object aimosSubRackV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.10 | ColumnaimosSubRackV1GainOffsetAge | read-write | current | In both the uplink (UL) and the downlink (DL) path for each of the three bands provided by the three amplifiers (1 to 3), the gain offset can be read-off and i… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.11 | ColumnaimosSubRackV1GainOffsetAmp1DL | read-write | current | Gain offset on amplifier 1 downlink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.12 | ColumnaimosSubRackV1GainOffsetAmp1UL | read-write | current | Gain offset on amplifier 1 uplink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.13 | ColumnaimosSubRackV1GainOffsetAmp2DL | read-write | current | Gain offset on amplifier 2 downlink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.14 | ColumnaimosSubRackV1GainOffsetAmp2UL | read-write | current | Gain offset on amplifier 2 uplink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.15 | ColumnaimosSubRackV1GainOffsetAmp3DL | read-write | current | Gain offset on amplifier 3 downlink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.16 | ColumnaimosSubRackV1GainOffsetAmp3UL | read-write | current | Gain offset on amplifier 3 uplink. The object aimosSubRackV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.17 | ColumnaimosSubRackV1TemperatureAge | read-write | current | aimosSubRackV1TemperatureBoard is an object of the TemperatureStatus type and contains the temperature measured at the SubRack Master Unit, in degrees Celsius.… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.18 | ColumnaimosSubRackV1TemperatureBoard | read-only | current | Temperature in degrees centigrade measured at the Sub Rack Master Unit. The object aimosSubRackV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.14.1.19 | ColumnaimosSubRackV1AmplifierBandNamesAge | read-write | current | Both Sub Rack Master Unit and each of its connected Remote Units have up to three amplifiers. The objects . aimosSubRackV1Amplifier1BandName . aimosSubRackV1Am… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.20 | ColumnaimosSubRackV1Amplifier1BandName | read-only | current | States which frequency band (UMTS, GSM1800, GSM900, or any else) is assigned to amplifier 1. The object aimosSubRackV1AmplifierBandNamesAge indicates the age o… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.21 | ColumnaimosSubRackV1Amplifier2BandName | read-only | current | States which frequency band (UMTS, GSM1800, GSM900, or any else) is assigned to amplifier 2. The object aimosSubRackV1AmplifierBandNamesAge indicates the age o… |
| 1.3.6.1.4.1.6408.201.3.5.14.1.22 | ColumnaimosSubRackV1Amplifier3BandName | read-only | current | States which frequency band (UMTS, GSM1800, GSM900, or any else) is assigned to amplifier 3. The object aimosSubRackV1AmplifierBandNamesAge indicates the age o… |
| 1.3.6.1.4.1.6408.201.3.5.15 | TableaimosRemoteUnitV1Table | not-accessible | current | This table contains information's about Remote Units with hardware revision 1. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.15.1 | RowaimosRemoteUnitV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.15.1.1 | ColumnaimosRemoteV1UnitReference | read-only | current | This object of type UnitReference is the first index of this table. It unambiguously identifies the unit, independent of its kind (Master Unit, Sub Rack Master… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.2 | ColumnaimosRemoteV1ValueSource | read-only | current | This object of type ValueSource is the second index in this table. It indicates, which value is to be addressed (actual, cached or desired value): . actual : A… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.3 | ColumnaimosRemoteV1NominalTemperatureAge | read-write | current | aimosRemoteUnitV1NominalTemperature is an object of type NominalTemperature, where the temperature to be obtained by fan control is entered in degrees centigra… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.4 | ColumnaimosRemoteV1NominalTemperature | read-write | current | Temperature to be obtained by fan control in degrees centigrade. The object aimosRemoteV1NominalTemperatureAge indicates the age of this information. Changes, … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.5 | ColumnaimosRemoteV1TemperatureAge | read-write | current | The Remote Unit has five temperature probes. For this, the MIB contains the following objects: . aimosRemoteV1TemperatureAmp1 . aimosRemoteV1TemperatureAmp2 . … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.6 | ColumnaimosRemoteV1TemperatureAmp1 | read-only | current | Amplifier 1 temperature in degrees centigrade. The object aimosRemoteV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.7 | ColumnaimosRemoteV1TemperatureAmp2 | read-only | current | Amplifier 2 temperature in degrees centigrade. The object aimosRemoteV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.8 | ColumnaimosRemoteV1TemperatureAmp3 | read-only | current | Amplifier 3 temperature in degrees centigrade. The object aimosRemoteV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.9 | ColumnaimosRemoteV1TemperatureBoard | read-only | current | Board temperature in degrees centigrade. The object aimosRemoteV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.10 | ColumnaimosRemoteV1TemperaturePowerSupply | read-only | current | Power supply temperature in degrees centigrade. The object aimosRemoteV1TemperatureAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.11 | ColumnaimosRemoteV1AmplifierStateAge | read-write | current | The downlink amplifiers for each one of the three frequency bands supported by the Remote Unit can be switched individually. For this, the MIB contains the fol… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.12 | ColumnaimosRemoteV1Amplifier1State | read-write | current | Denotes if the amplifier 1 is active or not. The object aimosRemoteV1AmplifierStateAge indicates the age of this information. Changes, which are made here, aff… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.13 | ColumnaimosRemoteV1Amplifier2State | read-write | current | Denotes if the amplifier 2 is active or not. The object aimosRemoteV1AmplifierStateAge indicates the age of this information. Changes, which are made here, aff… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.14 | ColumnaimosRemoteV1Amplifier3State | read-write | current | Denotes if the amplifier 3 is active or not. The object aimosRemoteV1AmplifierStateAge indicates the age of this information. Changes, which are made here, aff… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.15 | ColumnaimosRemoteV1AmplifierPowerAge | read-write | current | The output power at the downlink amplifiers for each one of the three frequency bands supported by the Remote Unit can be read off individually. For this, the … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.16 | ColumnaimosRemoteV1Amplifier1Power | read-only | current | Power of amplifier 1 in dB. The object aimosRemoteV1AmplifierPowerAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.17 | ColumnaimosRemoteV1Amplifier2Power | read-only | current | Power of amplifier 2 in dB. The object aimosRemoteV1AmplifierPowerAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.18 | ColumnaimosRemoteV1Amplifier3Power | read-only | current | Power of amplifier 3 in dB. The object aimosRemoteV1AmplifierPowerAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.19 | ColumnaimosRemoteV1AttenuationAge | read-write | current | For both the uplink (UL) and downlink (DL) paths the attenuation of the corresponding attenuator (located at the optical unit) required for Autolevelling for e… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.20 | ColumnaimosRemoteV1AttenuationAmp1DL | read-write | current | Attenuation on amplifier 1 downlink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.21 | ColumnaimosRemoteV1AttenuationAmp1UL | read-write | current | Attenuation on amplifier 1 uplink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.22 | ColumnaimosRemoteV1AttenuationAmp2DL | read-write | current | Attenuation on amplifier 2 downlink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.23 | ColumnaimosRemoteV1AttenuationAmp2UL | read-write | current | Attenuation on amplifier 2 uplink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.24 | ColumnaimosRemoteV1AttenuationAmp3DL | read-write | current | Attenuation on amplifier 3 downlink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the har… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.25 | ColumnaimosRemoteV1AttenuationAmp3UL | read-write | current | Attenuation on amplifier 3 uplink. The object aimosRemoteV1AttenuationAge indicates the age of this information. Changes, which are made here, affect the hardw… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.26 | ColumnaimosRemoteV1GainOffsetAge | read-write | current | For both the uplink (UL) and downlink (DL) paths the gain offset for each one of the three frequency bands can be read off individually or may be changed (only… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.27 | ColumnaimosRemoteV1GainOffsetAmp1DL | read-write | current | Gain offset on amplifier 1 downlink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.28 | ColumnaimosRemoteV1GainOffsetAmp1UL | read-write | current | Gain offset on amplifier 1 uplink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardwa… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.29 | ColumnaimosRemoteV1GainOffsetAmp2DL | read-write | current | Gain offset on amplifier 2 downlink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.30 | ColumnaimosRemoteV1GainOffsetAmp2UL | read-write | current | Gain offset on amplifier 2 uplink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardwa… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.31 | ColumnaimosRemoteV1GainOffsetAmp3DL | read-write | current | Gain offset on amplifier 3 downlink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hard… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.32 | ColumnaimosRemoteV1GainOffsetAmp3UL | read-write | current | Gain offset on amplifier 3 uplink. The object aimosRemoteV1GainOffsetAge indicates the age of this information. Changes, which are made here, affect the hardwa… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.33 | ColumnaimosRemoteV1ALCThresholdAge | read-write | current | For each one of the three frequency bands supported by the Remote Unit . the output power at the downlink amplifier can be limited (DL) and . the input power a… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.34 | ColumnaimosRemoteV1ALCThresholdAmp1DL | read-write | current | ALC threshold on amplifier 1 downlink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.35 | ColumnaimosRemoteV1ALCThresholdAmp1UL | read-write | current | ALC threshold on amplifier 1 uplink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.36 | ColumnaimosRemoteV1ALCThresholdAmp2DL | read-write | current | ALC threshold on amplifier 2 downlink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.37 | ColumnaimosRemoteV1ALCThresholdAmp2UL | read-write | current | ALC threshold on amplifier 2 uplink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.38 | ColumnaimosRemoteV1ALCThresholdAmp3DL | read-write | current | ALC threshold on amplifier 3 downlink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.39 | ColumnaimosRemoteV1ALCThresholdAmp3UL | read-write | current | ALC threshold on amplifier 3 uplink. The object aimosRemoteV1ALCThresholdAge indicates the age of this information. Changes, which are made here, affect the ha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.40 | ColumnaimosRemoteV1OpticalLossAge | read-write | current | For both the uplink and downlink paths the optical loss can be read-off via the following two objects in the MIB: . aimosRemoteV1OpticalLossDL and . aimosRemot… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.41 | ColumnaimosRemoteV1OpticalLossDL | read-only | current | Optical loss on downlink fibre. The object aimosRemoteV1OpticalLossAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.42 | ColumnaimosRemoteV1OpticalLossUL | read-only | current | Optical loss on uplink fibre. The object aimosRemoteV1OpticalLossAge indicates the age of this information. |
| 1.3.6.1.4.1.6408.201.3.5.15.1.43 | ColumnaimosRemoteV1Output1Name | read-write | current | Names the output pin 1 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any cha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.44 | ColumnaimosRemoteV1Output2Name | read-write | current | Names the output pin 2 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any cha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.45 | ColumnaimosRemoteV1Output3Name | read-write | current | Names the output pin 3 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any cha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.46 | ColumnaimosRemoteV1Output4Name | read-write | current | Names the output pin 4 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any cha… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.47 | ColumnaimosRemoteV1OutputAge | read-write | current | Each of the four digital outputs available at the Remote Unit can be accessed individually via one of the following four objects: . aimosRemoteV1Output1Value, … |
| 1.3.6.1.4.1.6408.201.3.5.15.1.48 | ColumnaimosRemoteV1Output1Value | read-write | current | State on external out pin 1. The object aimosRemoteV1OutputAge indicates the age of this information. Changes, which are made here, affect the hardware. That's… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.49 | ColumnaimosRemoteV1Output2Value | read-write | current | State on external out pin 2. The object aimosRemoteV1OutputAge indicates the age of this information. Changes, which are made here, affect the hardware. That's… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.50 | ColumnaimosRemoteV1Output3Value | read-write | current | State on external out pin 3. The object aimosRemoteV1OutputAge indicates the age of this information. Changes, which are made here, affect the hardware. That's… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.51 | ColumnaimosRemoteV1Output4Value | read-write | current | State on external out pin 4. The object aimosRemoteV1OutputAge indicates the age of this information. Changes, which are made here, affect the hardware. That's… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.52 | ColumnaimosRemoteV1Input1Name | read-write | current | Names the input pin 1 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any chan… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.53 | ColumnaimosRemoteV1Input2Name | read-write | current | Names the input pin 2 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any chan… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.54 | ColumnaimosRemoteV1Input3Name | read-write | current | Names the input pin 3 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any chan… |
| 1.3.6.1.4.1.6408.201.3.5.15.1.55 | ColumnaimosRemoteV1Input4Name | read-write | current | Names the input pin 4 for recognition what is connected. Changes, which are made here, affect the hardware. That's why TelCo's are not allowed to make any chan… |
| 1.3.6.1.4.1.6408.201.3.5.16 | TableaimosGSMNSOV1Table | not-accessible | current | Hardware version related informations about the GSM NSO's. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.16.1 | RowaimosGSMNSOV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.16.1.1 | ColumnaimosGSMNSOV1UnitReference | read-only | current | This object of type UnitReference is the first index of this table. It unambiguously identifies the unit, independent of its kind (Master Unit, Sub Rack Master… |
| 1.3.6.1.4.1.6408.201.3.5.16.1.2 | ColumnaimosGSMNSOV1ValueSource | read-only | current | This object of type ValueSource is the second index in this table. It indicates, which value is to be addressed (actual, cached or desired value): . actual : A… |
| 1.3.6.1.4.1.6408.201.3.5.16.1.3 | ColumnaimosGSMNSOV1Name | read-only | current | Presents the unique 8 character name of the NSO. |
| 1.3.6.1.4.1.6408.201.3.5.16.1.4 | ColumnaimosGSMNSOV1ScanInterval | read-write | current | Denotes the intervall time the NSO will restart its measurement. Note, the NSO needs approximately 60 seconds for measurement and some seconds for transmitting… |
| 1.3.6.1.4.1.6408.201.3.5.16.1.5 | ColumnaimosGSMNSOV1ScanBCCH | read-write | current | Denotes if the BCCH channel will be scanned. |
| 1.3.6.1.4.1.6408.201.3.5.16.1.6 | ColumnaimosGSMNSOV1CellStatus | read-write | current | Cell State Bit Remark 0 CELL_SUITABLE 1 CELL_LOW_PRIORITY 2 CELL_BARRED 3 CELL_LOW_LEVEL 4 CELL_FORBIDDEN 5 CELL_OTHER Other cell states indicating an alarm st… |
| 1.3.6.1.4.1.6408.201.3.5.16.1.7 | ColumnaimosGSMNSOV1MinScanSignalStrength | read-write | current | Channels with a lower RX level are not scanned. |
| 1.3.6.1.4.1.6408.201.3.5.16.1.8 | ColumnaimosGSMNSOV1SignalStrengthHysteresis | read-write | current | Signal strength modifications within the hysteresis do not cause the NSO to send data with new signal strength values. E.g., a hysteresis of +/- 1 dB ignores s… |
| 1.3.6.1.4.1.6408.201.3.5.16.1.9 | ColumnaimosGSMNSOV1MinAllowedSignalStrength | read-write | current | RX levels with a lower level indicating an alarm state. |
| 1.3.6.1.4.1.6408.201.3.5.16.1.10 | ColumnaimosGSMNSOV1MaxAllowedSignalStrength | read-write | current | RX levels with a higher level indicating an alarm state. |
| 1.3.6.1.4.1.6408.201.3.5.16.1.11 | ColumnaimosGSMNSOV1MaxAllowedBER | read-write | current | Bit Error Rates with a higher level indicating an alarm state. |
| 1.3.6.1.4.1.6408.201.3.5.17 | TableaimosGSMNSODataV1Table | not-accessible | current | GSM NSO measurement data. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.17.1 | RowaimosGSMNSODataV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.17.1.1 | ColumnaimosGSMNSODataV1ID | read-only | current | Identifies the table entry. This value ist determined by the system. |
| 1.3.6.1.4.1.6408.201.3.5.17.1.2 | ColumnaimosGSMNSODataV1LAC | read-only | current | Local Area Code. |
| 1.3.6.1.4.1.6408.201.3.5.17.1.3 | ColumnaimosGSMNSODataV1CI | read-only | current | Cell Identifier |
| 1.3.6.1.4.1.6408.201.3.5.17.1.4 | ColumnaimosGSMNSODataV1DateTime | read-only | current | Time of measurement. |
| 1.3.6.1.4.1.6408.201.3.5.17.1.5 | ColumnaimosGSMNSODataV1ARFCN | read-only | current | Channel |
| 1.3.6.1.4.1.6408.201.3.5.17.1.6 | ColumnaimosGSMNSODataV1BSIC | read-only | current | Base Station Identity Code. |
| 1.3.6.1.4.1.6408.201.3.5.17.1.7 | ColumnaimosGSMNSODataV1CS | read-only | current | Cell Status |
| 1.3.6.1.4.1.6408.201.3.5.17.1.8 | ColumnaimosGSMNSODataV1SignalStrength | read-only | current | Current RX level. |
| 1.3.6.1.4.1.6408.201.3.5.17.1.9 | ColumnaimosGSMNSODataV1BER | read-only | current | Current Bit Error Rate. |
| 1.3.6.1.4.1.6408.201.3.5.18 | TableaimosUMTSNSOV1Table | not-accessible | current | Hardware version related informations about the UMTS NSO's. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.18.1 | RowaimosUMTSNSOV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.18.1.1 | ColumnaimosUMTSNSOV1UnitReference | read-only | current | This object of type UnitReference is the first index of this table. It unambiguously identifies the unit, independent of its kind (Master Unit, Sub Rack Master… |
| 1.3.6.1.4.1.6408.201.3.5.18.1.2 | ColumnaimosUMTSNSOV1ValueSource | read-only | current | This object of type ValueSource is the second index in this table. It indicates, which value is to be addressed (actual, cached or desired value): . actual : A… |
| 1.3.6.1.4.1.6408.201.3.5.19 | TableaimosUMTSNSODataV1Table | not-accessible | current | UMTS NSO measurement data. Insert rows: must only be done by system Delete rows: must only be done by system |
| 1.3.6.1.4.1.6408.201.3.5.19.1 | RowaimosUMTSNSODataV1Entry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.5.19.1.1 | ColumnaimosUMTSNSODataV1ID | read-only | current | Identifies the table entry. This value ist determined by the system. |
| 1.3.6.1.4.1.6408.201.3.6 | IdentityaimosNEOperations | current | This object identity provides means to execute Network Element Operations. For example it is possible to request for a reboot of a NE. | |
| 1.3.6.1.4.1.6408.201.3.6.1 | TableaimosNEOperationsTable | not-accessible | current | This table contains the Network Elements capable of operation execution. The following Network Elements are supported (V 2.8.0): - Node M - Node C - Node G - N… |
| 1.3.6.1.4.1.6408.201.3.6.1.1 | RowaimosNEOperationsEntry | not-accessible | current | see description for table entry... |
| 1.3.6.1.4.1.6408.201.3.6.1.1.1 | ColumnaimosNEOperationsID | read-only | current | This object of type UnitReference uniquely identifies the Network Element. This value is related to the column 'NE No.' of the 'Network Element List' (A.I.M.O.… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.2 | ColumnaimosNEOperationsSDN | read-only | current | This object of type SDN shows the System Distinguished Name which consists of a chaining of all RDN's all the way down from the OMC point of view to the desire… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.3 | ColumnaimosNEOperationsTrapInfo | read-only | current | This object of type Text contains the Network Elements TrapInfo. |
| 1.3.6.1.4.1.6408.201.3.6.1.1.4 | ColumnaimosNEOperationsComponentName | read-only | current | This object of type Text contains the Network Elements Component Name. |
| 1.3.6.1.4.1.6408.201.3.6.1.1.5 | ColumnaimosNEOperationsLocation | read-only | current | This object of type Text contains the Network Elements Location. |
| 1.3.6.1.4.1.6408.201.3.6.1.1.6 | ColumnaimosNEOperationsUniqueSystemID | read-only | current | This object of type Text contains the Network Elements Unique System ID. |
| 1.3.6.1.4.1.6408.201.3.6.1.1.50 | ColumnaimosNEOperationsNEActive | read-only | current | This object of type Boolean indicates whether or not a Network Element (or at least one component capable of de-/activation if applicable) is active. This obje… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.51 | ColumnaimosNEOperationsDeactivateNE | read-write | current | This object of type NEOperationStatus provides means to deactivate a Network Element by applying a value of neoSubmit(2). Deactivation is performed in the foll… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.52 | ColumnaimosNEOperationsDeactivateNEInfo | read-only | current | This object of type Text is the textual representation of the value retunred by aimosNEOperationsDeactivateNE. In case it is neoFailed(10) a more precise descr… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.53 | ColumnaimosNEOperationsActivateNE | read-write | current | This object of type NEOperationStatus provides means to activate a Network Element by applying a value of neoSubmit(2). Activation is performed in the followin… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.54 | ColumnaimosNEOperationsActivateNEInfo | read-only | current | This object of type Text is the textual representation of the value retunred by aimosNEOperationsActivateNE. In case it is neoFailed(10) a more precise descrip… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.60 | ColumnaimosNEOperationsReboot | read-write | current | This object of type NEOperationStatus provides means to initiate a reboot of a Network Element by applying a value of neoSubmit(2). Furthermore its values indi… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.61 | ColumnaimosNEOperationsRebootInfo | read-only | current | This object of type Text is the textual representation of the value retunred by aimosNEOperationsReboot. In case it is neoFailed(10) a more precise description… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.70 | ColumnaimosNEOperationsQueryAlarms | read-write | current | This object of type NEOperationStatus provides means to forward a Query Alarms Command to a Network Element by applying a value of neoSubmit(2). Furthermore it… |
| 1.3.6.1.4.1.6408.201.3.6.1.1.71 | ColumnaimosNEOperationsQueryAlarmsInfo | read-only | current | This object of type Text is the textual representation of the value retunred by aimosNEOperationsQueryAlarms. In case it is neoFailed(10) a more precise descri… |
| 1.3.6.1.4.1.6408.201.4 | IdentityaimosNotifications | current | The A.I.M.O.S. SNMP Agent sends alarm notifications to as many alarm recipients as desired. All notifications contains the following objects: . sysUpTime durat… | |
| 1.3.6.1.4.1.6408.201.4.1 | ScalaraimosAgentState | accessible-for-notify | current | This value indicates what the agent is about to do. Please refer also to the DESCRIPTION clause for aimosAgentAnnouncement. |
| 1.3.6.1.4.1.6408.201.4.2 | ScalaraimosAcknowledgementOID | accessible-for-notify | current | This object comprises the OID, the value of which must be set to acknowledged(2) in order to confirm the alarm reception (i.e. perform the acknowledgement). If… |
| 1.3.6.1.4.1.6408.201.4.3 | ScalaraimosTrapEnterprise | accessible-for-notify | current | This object was intended to carry the entrerprise OID value in notifications, although the existing object snmpTrapEnterprise had already exactly this task. Th… |
| 1.3.6.1.4.1.6408.201.4.4 | NotificationaimosAgentAnnouncement | current | A aimosAgentAnnouncement notification is emitted by the agent if it is put in or out of operation. aimosAgentState of type AgentState indicates what actually h… | |
| 1.3.6.1.4.1.6408.201.4.5 | NotificationaimosAlarmNew | current | The aimosAlarmNew notification is used when a new alarm appears. It contains a new aimosAlarmListAlarmEventID. The aimosAlarmNew notification causes the A.I.M.… | |
| 1.3.6.1.4.1.6408.201.4.6 | NotificationaimosAlarmChanged | current | The aimosAlarmChanged notification is used when the severity of an uncleared alarm has changed. The alarm is correlated with the aimosAlarmNew notification by … | |
| 1.3.6.1.4.1.6408.201.4.7 | NotificationaimosAlarmCleared | current | The aimosAlarmCleared notification is used when an alarm gets cleared. The alarm is correlated with the aimosAlarmNew and aimosAlarmCleared notification by ide… | |
| 1.3.6.1.4.1.6408.201.4.8 | NotificationaimosAlarmListRebuildInitiated | current | The aimosAlarmListRebuildInitiated notification is sent, when an alarm list rebuild process was triggered. The notification will be emitted prior to the rebuil… | |
| 1.3.6.1.4.1.6408.201.4.9 | NotificationaimosHeartbeat | current | The aimosHeartbeat notification is sent out each [aimosWorkShiftHeartbeatInterval] minutes to the members of the Alarm Recipient List specified by the object [… | |
| 1.3.6.1.4.1.6408.201.4.10 | NotificationaimosAlarmRecognized | current | The aimosAlarmRecognized alarm is raised in case an alarm is recognized . either via aimosAlarmListRecognitionState . by means of the AIMOS_VIsu program The de… | |
| 1.3.6.1.4.1.6408.201.5 | IdentityaimosGroups | current | Group objects | |
| 1.3.6.1.4.1.6408.201.5.1 | GroupaimosMIB2Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.2 | GroupaimosLoginGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.4 | GroupaimosSystemInfoGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.5 | GroupaimosSystemConfigGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.6 | GroupaimosBandConfigGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.7 | GroupaimosBandInfoGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.8 | GroupaimosUserGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.9 | GroupaimosRoleGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.10 | GroupaimosPhoneBookGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.11 | GroupaimosAlarmConfigGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.12 | GroupaimosAlarmConfigGroupDeprecated | deprecated | Description. | |
| 1.3.6.1.4.1.6408.201.5.13 | GroupaimosAlarmInfoGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.14 | GroupaimosAlarmGroupConfigGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.15 | GroupaimosMasterGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.16 | GroupaimosMasterV1Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.17 | GroupaimosSubRackGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.18 | GroupaimosSubRackV1Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.19 | GroupaimosRemoteGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.20 | GroupaimosRemoteV1Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.21 | GroupaimosGSMNSOGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.22 | GroupaimosGSMNSOV1Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.23 | GroupaimosUMTSNSOGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.24 | GroupaimosUMTSNSOV1Group | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.27 | GroupaimosCableConfigGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.29 | GroupaimosNotificationGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.30 | GroupmidsNotificationsGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.5.31 | GroupaimosNetworkElementOperationsGroup | current | Description. | |
| 1.3.6.1.4.1.6408.201.6 | IdentityaimosCompliances | current | Compliance objects | |
| 1.3.6.1.4.1.6408.201.6.1 | ComplianceaimosCompliance | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AccessRight | INTEGER { noAccess(0), readOnly(1), readWrite(2) } | current | AccessRight is an INTEGER used in order to indicate the access rights of an user with the following named values: . noAccess(0) used in order to delete entries in aimosRoleRightTable . readOnly(1) updates are prohibited… |
| AcknowledgementState | INTEGER { indeterminate(0), unacknowledged(1), acknowledged(2) } | current | AcknowledgementState is an INTEGER used in order to indicate the acknowledgement state of an alarm by the following named values: . indeterminate(0) corresponds to X.733, however in A.I.M.O.S. not used . unacknowledged(… |
| AgentState | INTEGER { snmpColdStart(1), snmpPause(2), snmpResume(3), snmpShutDown(4) } | current | AgentState is an INTEGER value used in order to indicate what the A.I.M.O.S. SNMP Agent is about to do by the following named values: . snmpColdStart(1) the agent was started and is now running . snmpPause(2) not yet us… |
| AlarmForwardingType | INTEGER { disabled(0), snmpV1(1), snmpV2c(2) } | current | AlarmForwardingType is an INTEGER used in order to indicate the type of alarm forwarding by the following named values: . disabled(0) alarm forwarding is disabled . snmpV1(1) alarm forwarding is using the TRAP-TYPE cons… |
| AlarmID | INTEGER { alarmAC(1), alarmALC(2), alarmAmplifier(3), alarmAmplifierCurrent(4), alarmAttSet(5), alarmAutoLeveling(6), alarmAuxSet(7), alarmBitErrorRate(8), alarmBooster(9), alarmBus(10), alarmChannel(11), alarmCellLost(13), alarmConnection(15), alarmControlBoard(16), alarmConvBias(17), alarmConverter(18), alarmCellStatusChanged(19), alarmCurrent(20), alarmCurrentFail(21), alarmDistribution(22), alarmDistributor(23), alarmDoorOpen(24), alarmDriverAmp(25), alarmEnergyCellTemp(26), alarmEnergyCellVoltage(27), alarmExternalInput(28), alarmFan(29), alarmHeartBeat(30), alarmICEOscilPower(31), alarmInputPower(32), alarmMIB(33), alarmMicrowaveLock(34), alarmOperatorRequired(35), alarmOptic(36), alarmOpticCurrent(37), alarmOscillator(38), alarmPA(39), alarmPasswordWrong(40), alarmPowerAmplifier(41), alarmPowerOut(42), alarmPowerOutBelowLimit(43), alarmPowerOutLow(44), alarmPowerSupply(45), alarmPreAmplifier(46), alarmRelay(47), alarmRFPath(48), alarmRSSI(49), alarmRSSILow(50), alarmRxLevelHigh(51), alarmRxLevelLow(52), alarmSolarVoltage(53), alarmSummarizer(54), alarmSynthesizerCurrent(55), alarmSynthesizer(56), alarmSystemModule(57), alarmSystemTemp(58), alarmUnitUnavailable(59), alarmVSWR(60), alarmAutoLevelingOutOfRange(61), alarmOMC(62), alarmHeartbeatMissing(63), alarmIPP(64), alarmCommonPilotChannelHigh(65), alarmCommonPilotChannelLow(66), alarmTemperatureStage1(67), alarmTemperatureStage2(68), alarmCurrent2(69), alarmInvalidLogin(70), alarmChannelNew(71), alarmChannelLost(72), alarmChannelAllocationChanged(73), alarmUMTSRxLevelHigh(74), alarmUMTSRxLevelLow(75), alarmUMTSCodePowerLow(76), alarmUMTSCPICHEnergyToNoiseRatioLow(77), alarmUMTSCPICHCodePowerHigh(78), alarmUMTSCPICHCodePowerLow(79), alarmUMTSBCHBlockErrorRateHigh(80), alarmUMTSPSCCodePowerLow(81), alarmUMTSChannelLost(82), alarmAlarmlistDeleted(83), alarmDataOutOfSequence(84), alarmExternalOutput(85), alarmGsmNso(86) } | current | AlarmID is an INTEGER used in order to indicate the kind of alarm. |
| AlarmValue | Unsigned32 (0..9999999) | current | AlarmValue is an Unsigned32 value within the range from 0 to 9.999.999 used in order to provide an alarm dependent value. |
| ALCThreshold | Unsigned32 (0..255) | current | ALCThreshold is an Unsigned32 value within the range from 0 to 255 used in order to represent ALC Threshold values. |
| AmplifierPower | Integer32 (-640..635) | current | AmplifierPower is an Unsigned32 value within the range from -640 to 635 used in order to represent the power value in tenth of dB in steps of 0.5 dB. I.e., valid values are 5,10,15,... |
| ARFCN | Unsigned32 (0..16383) | current | ARFCN is an Unsigned32 value within the range from 0 to 16.383 used in order to represent the absolute radio frequency channel number. |
| Attenuation | Integer32 (0..30) | current | Attenuation is an Unsigned32 value within the range from 0 to 30 used in order to provide an attenuation value in dB. |
| BER | Unsigned32 (0..254) | current | BER is an Unsigned32 value within the range from 0 to 254 used in order to represent the bit error rate in tenth of dB. |
| Boolean | INTEGER { false(0), true(1) } | current | Boolean is an INTEGER used in order to represent a boolean value by the named values of . false(0) . true(1) |
| CableCode | OCTET STRING (SIZE (1..40)) | current | CableCode is an OCTET STRING with a length of up to 40 characters used in order to represent the custom cable code, to which the fibre belongs. Each character must be in range 32 to 126 (' ' <space> to '~' <tilde>). |
| CableCodeConcatenator | OCTET STRING (SIZE (1)) | current | CableCodeConcatenator is an OCTET STRING with a fixed length of 1 character used in order to concatenate Cable Codes. |
| CableID | Unsigned32 (1..2147483647) | current | CableID is an Unsigned32 value within the range from 1 to 2^32-1 used in order to represent the unique key for cables, which are used for interconnection between Remote Units and SubRack Master Units. |
| CellStatus | INTEGER { cellSuitable(0), cellLowPriority(1), cellBarred(2), cellLowLevel(3), cellForbidden(4), cellOther(5) } | current | CellStatus is an INTEGER used in order to indicate the cell status by the following named values: . cellSuitable(0) . cellLowPriority(1) . cellBarred(2) . cellLowLevel(3) . cellForbidden(4) . cellOther(5) |
| CI | Unsigned32 (0..65535) | current | CI is an Unsigned32 value within the range from 0 to 65.535 used in order to represent the cell identifier. |
| ClearMode | INTEGER { indeterminate(0), autoClear(1), manualClear(2), clearOnAck(3), ackIsClear(4) } | current | ClearMode is an INTEGER used in order to indicate how an alarm gets cleared by the following named values: . indeterminate(0) not used . autoClear(1) if the alarm condition does not exist any longer, a aimosAlarmCleared… |
| ClearReason | INTEGER { stillActive(0), autoCleared(1), manualCleared(2), objectDeleted(3), objectConfigured(4), alarmListRebuild(5), alarmChanged(6) } | current | ClearReason is an INTEGER used in order to indicate the reason of an alarm is going cleared by the following named values: . stillActive(0) what it says: the alarm is not cleared yet . autoCleared(1) the alarm was clear… |
| Community | OCTET STRING (SIZE (1..40)) | current | Community is an OCTET STRING with up to 40 characters each being in range from 32 to 126 (' ' <space> to '~' <tilde>). |
| ControllerPassword | OCTET STRING (SIZE (6..8)) | current | ControllerPassword is a OCTET STRING with the following requirements: . it consists of at least 6, but at the most 8 characters . it contains at least one capital letter in the range from A to Z . it contains at least o… |
| Coordinates | OCTET STRING (SIZE (0 | 3..21)) | current | Coordinates is an OCTET STRING with at least 3 up to 21 characters holding two values divided by a slash. The first one represents the x-coordinate and the other one represents the y-coordinate of a map position value. |
| DistinguishedNameHierarchySymbol | OCTET STRING (SIZE (1)) | current | |
| DistinguishedNameSeparator | OCTET STRING (SIZE (1)) | current | |
| EventType | INTEGER { communications(1), qualityOfService(2), processingError(3), equipment(4), environmental(5) } | current | EventType is an INTEGER used in order to indicate the event type of an alarm by the following named values: . communications(1) . qualityOfService(2) . processingError(3) . equipment(4) . environmental(5) |
| FrequencyRange | Unsigned32 (400000..2400000) | current | FrequencyRange is an Unsigned32 value within the range from 400.000 to 2.400.000 used in order to represent radio frequency values in kHz. |
| GainOffset | Integer32 (-9..9) | current | GainOffset is an Unsigned32 value within the range from 0 to 30 used in order to provide an gain offset value. |
| GeographicPositionFormat | INTEGER { degreeMinuteSecond(0), decimalSecond(1), decimalMinute(2), decimalDegree(3), signedValue(4) } | current | Four formats are available: degreeMinuteSecond(0) shows degrees, minutes and seconds decimalSecond(1) shows degrees, minutes and decimal seconds decimalMinute(2) shows degrees and decimal minutes decimalDegree(3) shows … |
| GPSPosition | OCTET STRING (SIZE (0..30)) | current | GPSPosition is an OCTET STRING with a length of up to 30 characters indicating either a latitude or a longitude. The format used is determined by aimosPhoneBookGeographicPositionFormat. |
| GUID | OCTET STRING (SIZE (38)) | current | GUID is an OCTET STRING with a fixed length of 38 character used in order to represent a Microsoft Windows GUID in printable format. |
| IdentNo | OCTET STRING (SIZE (0..10)) | current | IdentNo is an OCTET STRING with up to 10 characters used in order to represent the Mikom Ident-No. |
| InterfaceType | INTEGER { ifMIBDefault(0), ifOMC3Default(1), ifOMC3Nokia(2), ifNE3S(3), ifAimosObsolete(4), ifAimos(5) } | current | InterfaceType is an INTEGER used in order to indicate the kind of alarm forwarding expected by the SNMP Manager by the following named values: . ifMIBDefault(0) currently the same as ifAimos(5) . ifOMC3Default(1) force … |
| IPAddressAndPort | OCTET STRING (SIZE (7..21)) | current | IPAddressAndPort is an OCTET STRING with at least 7 up to 21 characters used in order to represent an IP address and its IP/UDP port number in the following format: a.b.c.d:port, e.g.: 192.168.1.54:162 If the port numbe… |
| LAC | Unsigned32 (1..65533) | current | Location Area CodeLAC is an Unsigned32 value within the range from 1 to 65.533 used in order to represent the location area code. |
| LocalTime | OCTET STRING (SIZE (10)) | current | LocalTime is an OCTET STRING having 10 octets used in order to represent date and time values in local time format. It consists of the following fields: field octets contents range 1 1-2 year 0..2999 2 3 month 1..12 3 4… |
| LoginState | INTEGER { disconnected(0), connected(1), refused(2), canceled(3), passwordExpired(4) } | current | LoginState is an INTEGER value used in order to indicate the login state with the following named values: . disconnected(0) no access to OID's beneath aimosObjects . connected(1) access to all OID's of A.I.M.O.S. MIB (a… |
| MasterID | Unsigned32 (1..9999) | current | MasterID is an Unsigned32 value within the range from 1 to 9.999 used in order to uniquely identify Master Units, each containing up to 13 Racks. While each Master Unit contains exact one Master Controller it is also us… |
| MasterState | INTEGER { indeterminate(0), requestGUID(1), performGUIDRequest(2), missingGUID(3), requestNetInfo(4), performNetInfoRequest(5), missingNetInfo(6), properlySet(7) } | current | MasterState is an INTEGER value used in order to indicate the state of system integration with the following named values: . indeterminate(0) not used . requestGUID(1) used in order to inquire the Master Controller's GU… |
| MCC | Unsigned32 (200..799) | current | MCC is an Unsigned32 value within the range from 200 to 799 used in order to represent Mobile Country Codes. |
| MNC | Integer32 (0..99) | current | MNC is an Unsigned32 value within the range from 0 to 99 used in order to represent Mobile Network Codes. |
| NEOperationStatus | INTEGER { neoNone(0), neoIdle(1), neoSubmit(2), neoQueued(3), neoPhysicalConnecting(4), neoPhysicalConnected(5), neoWaitingForSession(6), neoSessionEstablished(7), neoStarted(8), neoSucceeded(9), neoFailed(10) } | current | NEOperationStatus is an INTEGER used in order to indicate the status of a Network Element Operation by the following named values: . neoNone(0) Network Element does not support this Operation . neoIdle(1) no operation s… |
| NetworkStandard | INTEGER { umts(1), dcs(2), gsm(3) } | current | NetworkStandard is an INTEGER used in order to indicate a network standards with the following named values: . umts(1) UMTS . dcs(2) GSM1800 . gsm(3) GSM900 |
| NominalTemperature | Integer32 (40..65) | current | NominalTemperature is an Unsigned32 value within the range from 40 to 65 used in order to adjust the desired temperature value in degrees centigrade. |
| NSOID | Unsigned32 (1) | current | NSOID is an Unsigned32 value used in order to represent the unique key for GSM NSO's, each connected to one Remote Unit. |
| OperationMode | INTEGER { idle(0), stopping(1), stop(2), running(3), starting(4), start(5) } | current | OperationMode is an INTEGER used in order to indicate the operation mode by the following named values: . idle(0) no operation takes place at present . stopping(1) the operation is terminating . stop(2) used in order to… |
| OpticalLoss | Integer32 (-640..635) | current | OpticalLoss is an Unsigned32 value within the range from -640 to 635 used in order to represent the optical loss value in tenth of dB. |
| OrgID | Unsigned32 (200000..799299) | current | The OrgID is an Unsigned32 value with a fixed length of 6 digits and the range from 200.000 to 799.299 used in order to represent organisation IDs. It contains: . MCC (mobile country code 3 digits) . TelCo/provider flag… |
| OrgLevel | INTEGER { indeterminate(0), telco(1), provider(2), manufacturer(3) } | current | OrgLevel is an INTEGER used in order to indicate the role the organisation is playing in the A.I.M.O.S. system with the following named values: . indeterminate(0) not used . telco(1) organisation is a TelCo . provider(2… |
| PasswordStandard | INTEGER { normal(0), numbers(1), specials(2), numbersOrSpecials(3), numbersAndSpecials(4), upperCase(5), lowerCase(6), upperCaseAndLowerCase(7), upperCaseAndLowerCaseAndNumeric(8), upperCaseAndLowerCaseAndSpecial(9), upperCaseAndLowerCaseAndNumericOrSpecial(10), numericAndSpecialAndUpperCaseAndLowerCase(11) } | current | PasswordStandard is an INTEGER value used in order to indicate the password security level by the following named values (the description indicates in each case, which character must be contained, so that a password is … |
| PasswordString | OCTET STRING (SIZE (5..100)) | current | PasswordString is an OCTET STRING with at least 5 up to 40 characters each being in a range from 32 to 126 (' ' <space> to '~' <tilde>). Each response to objects of type PasswordString will be a sequence of '*'. |
| PhoneBookEntry | OCTET STRING (SIZE (1..100)) | current | PhoneBookEntry is an OCTET STRING with a length of at least 1 up to 100 characters used in order to give a phonebook entry a name. The name must start with a letter and each character must be in range 32 to 126 (' ' <sp… |
| ProbableCause | INTEGER { unknown(0), adapterError(1), applicationSubsystemFailure(2), bandwidthReduced(3), callEstablishmentError(4), communicationsProtocolError(5), communicationsSubsystemFailure(6), configurationOrCustomizationError(7), congestion(8), corruptData(9), cpuCyclesLimitExceeded(10), dTEDCEInterfaceError(11), dataSetOrModemError(12), degradedSignal(13), enclosureDoorOpen(14), equipmentMalfunction(15), excessiveVibration(16), fileError(17), fireDetected(18), floodDetected(19), framingError(20), heatingOrVentialtionOrCoolingSystemProblem(21), humidityUnacceptable(22), inputOutputDeviceError(23), inputDeviceError(24), lANError(25), leakDetected(26), localNodeTransmissionError(27), lossOfFrame(28), lossOfSignal(29), materialSupplyExhausted(30), multiplexerProblem(31), outOfMemory(32), outputDeviceError(33), performanceDegraded(34), powerProblem(35), pressureUnacceptable(36), processorProblem(37), pumpFailure(38), queueSizeExceeded(39), receiveFailure(40), receiverFailure(41), remoteNodeTransmissionError(42), resourceAtOrNearingCapacity(43), responseTimeExcessive(44), retransmissionRateExcessive(45), softwareError(46), softwareProgramAbnormallyTerminated(47), softwareProgramError(48), storageCapacityProblem(49), temperatureUnacceptable(50), thresholdCrossed(51), timingProblem(52), toxicLeakDetected(53), transmitFailure(54), transmitterFailure(55), underlyingResourceUnavailable(56), versionMismatch(57), snmpTrapColdStart(100), snmpTrapWarmStart(101), snmpTrapLinkDown(102), snmpTrapLinkUp(103), snmpTrapAuthenticationFailure(104), snmpTrapEgpNeighborloss(105), snmpTrapEnterpriseSpecific(106), snmpTrapLinkUpDown(107) } | current | ProbableCause is an INTEGER used in order to indicate the ITU-T Recommendation X.733 clause 8.1.2.1 conform probable cause of an alarm. |
| RDN | OCTET STRING (SIZE (4..16)) | current | RDN is an OCTET STRING with up to 16 characters used in order to represent a relative distinguished name. The RDN uniquely identifies the unit within its parent. Each character must be in range 32 to 126 (' ' <space> to… |
| RecognitionState | INTEGER { indeterminate(0), unrecognized(1), recognized(2) } | current | RecognitionState is an INTEGER used in order to indicate the recognition state of an alarm by the following named values: . indeterminate(0) . unrecognized(1) . recognized(2) |
| RemoteID | Unsigned32 (1..4) | current | RemoteID is an Unsigned32 value with the range from 1 to 4 used in order to represent the unique key for a Remote Unit. |
| RightArea | INTEGER { administrationAlarms(100), administrationFolder(200), administrationMCAccounts(300), administrationMC(400), administrationOMCAccounts(500), administrationOMC(600), administrationSNMPNorthbound(700), administrationSNMPSouthbound(800), controlAlarmSystem(900), controlDeviceParameter(1000), fileUploadDownload(1100), factorySettings(2000), accountManagement(2100), northboundManagement(2200), connectivityManagement(2300), scheduler(2325), jobMonitor(2350), logManager(2375), coverageNetworkManagementGeneral(2400), coverageNetworkManagementConfiguration(2500), coverageNetworkManagementManualDelete(2550), coverageNetworkManagementMaintenance(2600), coverageNetworkManagementMapView(2630), coverageNetworkManagementManualClear(2660), coverageNetworkManagementSupervision(2700), coverageNetworkManagementTopology(2800), organizationProfilesManagement(2900), performanceManager(2925), reporting(2950), sessionManagement(3000), unitList(3100), watchDog(3200) } | current | RightArea is an INTEGER used in order to indicate the controller right with the following named values: . factorySettings(2000) . accountManagement(2100) . northboundManagement(2200) . connectivityManagement(2300) . sch… |
| SDN | OCTET STRING (SIZE (4..80)) | current | The SDN is an OCTET STRING having up to 80 characters used in order to represent system distinguished names. Each character must be in range from 32 to 126 (' ' <space> to '~' <tilde>). |
| SerialNo | OCTET STRING (SIZE (0..10)) | current | SerialNo is an OCTET STRING with up to 10 characters used in order to represent the Mikom Serial-No of the device. |
| Severity | INTEGER { indeterminate(0), critical(1), major(2), minor(3), warning(4), cleared(5), information(6) } | current | Severity is an INTEGER used in order to indicate the relative level of urgency for operator attention by the following named values: . indeterminate(0) . critical(1) . major(2) . minor(3) . warning(4) . cleared(5) . inf… |
| SpecificProblem | Unsigned32 (0..9999) | current | SpecificProblem is an Unsigned32 value within a range from 0 to 9.999 used in order to classify the fault situation as defined in ITU-T Recommendation X.733 clause 8.1.2.2. |
| SubRackID | Unsigned32 (1..124) | current | SubRackID is an Unsigned32 value within the range from 1 to 124 used in order to represent the unique key for SubRack Master Units, each contained in one Master Unit and connected to some Remote Units. |
| SystemAvailability | INTEGER { inaccessible(0), accessible(1), exclusiveAccessRequested(2), exclusiveAccess(3) } | current | SystemAvailability is in later released versions of the agent needed for system backup and restore purposes. It has the syntax INTEGER with the following named values: . inaccessible(0) not used yet . accessible(1) logi… |
| TableIndex | Unsigned32 (1..2147483647) | current | TableIndex is an Unsigned32 value within the range from 1 to 2^32-1 used for table indexing. |
| TemperatureStatus | Integer32 (-55..125) | current | TemperatureStatus is an Unsigned32 value within the range from -55 to 125 used in order to represent the current temperature value in degrees centigrade. |
| Text | OCTET STRING (SIZE (0..100)) | current | Text is an OCTET STRING with up to 100 characters having each character in a range from 32 to 126 (' ' <space> to '~' <tilde>). |
| TimeDisplayFormat | INTEGER { default(0), osiBinary(1), osiText(2), osiFormatted(3), snmpBinary(4), snmpText(5), snmpFormatted(6), windows(7) } | current | TimeDisplayFormat is an INTEGER used in order to indicate of how date and time values are transmitted in objects of type VariableTime are encoded by the SNMP agent. This will be done using one of the following named val… |
| TimeFormat | INTEGER { utcTimeFormat(0), localTimeFormat(1) } | current | TimeFormat is an INTEGER used in order to indicate the time format for date and time values with the following named values: . utcTimeFormat(0) Coordinated Universal Time (UTC), also known as Greenwich Mean Time (GMT) .… |
| TrendIndication | INTEGER { lessSevere(0), noChange(1), moreSevere(2) } | current | TrendIndication is an INTEGER used in order to indicate the ISO/IEC 10164-4, Chapter 8.1.2.6 conform trend indication of an alarm by the following named values: . lessSevere(0) . noChange(1) . moreSevere(2) |
| UnitReference | Unsigned32 (1..2147483647) | current | UnitReference is an Unsigned32 value that can be used for a system-wide unique identification of each individual unit. Contrary to this the textual conventions MasterID, SubRackID, RemoteID and NSOID only identify the c… |
| UserName | OCTET STRING (SIZE (1..40)) | current | UserName is an OCTET STRING having up to 40 characters used in order to represent uniquely user names. Each character must be in range from 32 to 126 (' ' <space> to '~' <tilde>). |
| UTCTime | OCTET STRING (SIZE (8)) | current | UTCTime is an OCTET STRING having 8 octets used in order to represent date and time values in UTC time format. This format consists of the following fields: field octets contents range 1 1-2 year 0..2999 2 3 month 1..12… |
| ValueSource | INTEGER { actualValue(1), cachedValue(2), desiredValue(3) } | current | ValueSource is an INTEGER used in order to indicate the value to be addressed with the following named values: . actualValue(1) the current value . cachedValue(2) the most recent read value . desiredValue(3) a desired v… |
| VariableTime | OCTET STRING (SIZE (0..28)) | current | VariableTime is an OCTET STRING with up to 28 characters used in order to represent date and time values. Two objects have influence on coding the values: . aimosTimeFormat specifies whether times are coded in UTC or in… |
| Version | OCTET STRING (SIZE (3..15)) | current | Version is an OCTET STRING with at least 3 up to 13 characters in the format n.n.n.n (e.g. 1.0.5.328) denoting the hierarchical nested major and minor version, release, and build identification. |
| WeekMinutes | Unsigned32 (0..10080) | current | WeekMinutes is an Unsigned32 value within the range from 0 to 10.080 used in order to represent an amount of minutes for up to one week. |