MIB Viewer

AISLC1-MIB

53 objects
The MIB Module for Series One Smart Line Cards (SLC).
Imported Objects
RFC1213-MIBDisplayString
SNMPv2-SMICounter32 enterprises Gauge32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.539Nodeaii
1.3.6.1.4.1.539.2NodeaiSystemOID
1.3.6.1.4.1.539.2.192Nodeai192
1.3.6.1.4.1.539.2.192.7Nodeai192Ver7
1.3.6.1.4.1.539.2.192.7.0Nodeai192Ver70
1.3.6.1.4.1.539.2.192.7.0.8Nodeai192Ver708
1.3.6.1.4.1.539.2.192.7.0.9Nodeai192Ver709
1.3.6.1.4.1.539.2.192.7.1Nodeai192Ver71
1.3.6.1.4.1.539.2.192.7.1.0Nodeai192Ver710
1.3.6.1.4.1.539.2.192.7.1.1Nodeai192Ver711
1.3.6.1.4.1.539.2.192.7.2Nodeai192Ver72
1.3.6.1.4.1.539.2.192.7.2.0Nodeai192Ver720
1.3.6.1.4.1.539.2.192.7.7Nodeai192Ver77
1.3.6.1.4.1.539.2.196Nodeai196
1.3.6.1.4.1.539.2.196.7Nodeai196Ver7
1.3.6.1.4.1.539.2.196.7.0Nodeai196Ver70
1.3.6.1.4.1.539.2.196.7.0.8Nodeai196Ver708
1.3.6.1.4.1.539.2.196.7.0.9Nodeai196Ver709
1.3.6.1.4.1.539.2.196.7.1Nodeai196Ver71
1.3.6.1.4.1.539.2.196.7.1.0Nodeai196Ver710
1.3.6.1.4.1.539.2.196.7.1.1Nodeai196Ver711
1.3.6.1.4.1.539.2.196.7.2Nodeai196Ver72
1.3.6.1.4.1.539.2.196.7.2.0Nodeai196Ver720
1.3.6.1.4.1.539.2.196.7.7Nodeai196Ver77
1.3.6.1.4.1.539.11IdentityaiSLC1The MIB Module for Series One Smart Line Cards (SLC).
1.3.6.1.4.1.539.11.1NodeaiSLC1System
1.3.6.1.4.1.539.11.1.1Scalaraislc1AdminLogsEnabledread-writecurrentDetermines whether the SLC sends log messages to the console port of the AISwitch.
1.3.6.1.4.1.539.11.1.2Scalaraislc1AdminTrapsEnabledread-writecurrentDetermines whether the SLC sends SNMP Trap PDUs. If the active CLC in the AISwitch chassis with the SLC is not SNMP capable, this object cannot be set to the v…
1.3.6.1.4.1.539.11.1.3Scalaraislc1AdminTrapTimerread-writecurrentAfter a trap is generated, a timer is started. If the event that generated the trap occurs while the timer is running, no trap will be generated for the event.…
1.3.6.1.4.1.539.11.1.4Scalaraislc1OperLastMsgTextread-onlycurrentContains the message text of the last log message that was sent by the SLC (or would have been sent, if log message transmission is disabled.
1.3.6.1.4.1.539.11.1.5Scalaraislc1OperLastMsgNumread-onlycurrentContains the message number of the last log message that was sent by the SLC (or would have been sent, if log message transmission is disabled.
1.3.6.1.4.1.539.11.1.6Scalaraislc1OperCrashCoderead-onlycurrentContains a crash cause code. This object is for use as a varbind in TRAP PDUs only.
1.3.6.1.4.1.539.11.1.7Scalaraislc1OperNumEventsSinceLastTrapread-onlycurrentThe number of times this trap was discarded because the aislcAdminTrapTimer had not yet expired since the last time the event which generated the trap occured.…
1.3.6.1.4.1.539.11.1.8Scalaraislc1StatAIBfrsInUseread-onlycurrentThe number of AI buffers currently in use.
1.3.6.1.4.1.539.11.1.9Scalaraislc1StatAIBfrsTotalread-onlycurrentThe total number of AI buffers.
1.3.6.1.4.1.539.11.1.10Scalaraislc1StatActiveVCsread-onlycurrentThe number of Virtual Connections currently in some state other than Idle.
1.3.6.1.4.1.539.11.1.11Scalaraislc1StatTotalVCsread-onlycurrentThe total number of Virtual Connection structures allocated on the SLC.
1.3.6.1.4.1.539.11.1.12Scalaraislc1StatMinLoopsPerSecondread-onlycurrentThe minimum number of iterations per second of the SLC's main polling loop during the sample period.
1.3.6.1.4.1.539.11.1.13Scalaraislc1StatAvgLoopsPerSecondread-onlycurrentThe average number of iterations per second of the SLC's main polling loop during the sample period.
1.3.6.1.4.1.539.11.1.14Scalaraislc1StatCurLoopsPerSecondread-onlycurrentThe number of iterations of the SLC's main polling loop during the past second.
1.3.6.1.4.1.539.11.1.15Scalaraislc1StatFErrFifoInIsrread-onlycurrentNumber of RxFIFO half-full ISR interrupts which occurred. This is not always an error, but may be indicative of a heavy load on the X.25 software.
1.3.6.1.4.1.539.11.1.16Scalaraislc1StatErrFifoInFullread-onlycurrentNumber of times the input FIFO was detected as full. This means that data has probably been lost, due to the inability of the X.25 software to keep pace with t…
1.3.6.1.4.1.539.11.1.17Scalaraislc1StatErrFifoInPortread-onlycurrentNumber of times a bad port number has been received through the FIFO. This is probably indicative of a hardware failure, or perhaps a software problem in the C…
1.3.6.1.4.1.539.11.1.18Scalaraislc1StatErrFifoInLostread-onlycurrentNumber of characters received from the FIFO which were discarded because of lack of space.
1.3.6.1.4.1.539.11.1.19Scalaraislc1StatErrFifoOutFullread-onlycurrentNumber of times the output FIFO was detected as full. This may be an indication of a hardware fault, or a breakdown in communications between the X.25 software…
1.3.6.1.4.1.539.11.1.20Scalaraislc1StatErrWinInCoderead-onlycurrentNumber of bad transaction codes received from the CLC via the window(i.e., the transaction code is out of range of the expected values).
1.3.6.1.4.1.539.11.1.21Scalaraislc1StatErrWinInPortread-onlycurrentNumber of bad port numbers received from the CLC via the window(i.e., the relative port number is out of range of the expected values).
1.3.6.1.4.1.539.11.1.22Scalaraislc1StatErrWinInConnread-onlycurrentNumber of bad connection transactions from the CLC via the window.
1.3.6.1.4.1.539.11.1.23Scalaraislc1StatErrWinInDiscread-onlycurrentNumber of bad disconnection transactions from the CLC via the window. Note that this counter will probably be incremented if calls are disconnected following a…
1.3.6.1.4.1.539.11.1.24Scalaraislc1StatErrWinInAckread-onlycurrentNumber of unexpected connection ACK's from the CLC via the window.
1.3.6.1.4.1.539.11.1.25Scalaraislc1StatErrWinInNakread-onlycurrentNumber of unexpected connection NAK's from the CLC via the window.
1.3.6.1.4.1.539.11.1.26Scalaraislc1StatErrWinOutLostread-onlycurrentNumber of output window transactions which were lost due to buffer failures.
1.3.6.1.4.1.539.11.1.27Scalaraislc1StatAIBfrsMaxread-onlycurrentThe maximum number of AI buffers that have been used.