AISLCSYSCFG-MIB
55 objects
MIB module for SLC system parameters.
Imported Objects
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | enterprises MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.539 | Nodeaii | |||
| 1.3.6.1.4.1.539.21 | IdentityaiSLCSysCfg | MIB module for SLC system parameters. | ||
| 1.3.6.1.4.1.539.21.1 | ScalaraislcscSystemPrompt | read-write | current | Prompt for login shells. Maximum length is 80 characters. |
| 1.3.6.1.4.1.539.21.2 | ScalaraislcscShellMinLogLevel | read-write | current | Minimum message severity which will be logged to a shell connection. |
| 1.3.6.1.4.1.539.21.3 | ScalaraislcscFtpPort | read-write | current | TCP port for accepting FTP connections. |
| 1.3.6.1.4.1.539.21.4 | ScalaraislcscTelnetPort | read-write | current | TCP port for accepting Telnet connections. |
| 1.3.6.1.4.1.539.21.5 | TableaiSLCSysCfgManagerTable | not-accessible | current | Table of IP addresses to which SNMP traps will be sent, indexed by an integer. |
| 1.3.6.1.4.1.539.21.5.1 | RowaiSLCSysCfgManagerEntry | not-accessible | current | Entry of aiSLCSysCfgManagerTable. |
| 1.3.6.1.4.1.539.21.5.1.1 | ColumnaislcscManagerIndex | read-only | current | Index into this table of SNMP managers. |
| 1.3.6.1.4.1.539.21.5.1.2 | ColumnaislcscManagerAddress | read-write | current | SNMP manager IP address. 0.0.0.0 indicates an unused entry. |
| 1.3.6.1.4.1.539.21.5.1.3 | ColumnaislcscManagerTrapPort | read-write | current | SNMP manager trap port destination number. |
| 1.3.6.1.4.1.539.21.6 | ScalaraislcscReadCommunity | read-write | current | SNMP community string for read-only access. |
| 1.3.6.1.4.1.539.21.7 | ScalaraislcscWriteCommunity | read-write | current | SNMP community string for read-write access. |
| 1.3.6.1.4.1.539.21.8 | Scalaraislcsctl1SourceID | read-write | current | TL1 source identifier. Maximum length is 20 characters. |
| 1.3.6.1.4.1.539.21.9 | Scalaraislcsctl1LogonRequired | read-write | current | Indicates whether or not an ACT-USER command is required for TL1 access. |
| 1.3.6.1.4.1.539.21.10 | Scalaraislcsctl1NumBadLogons | read-only | current | The number of failed TL1 logons that have occurred since the last successful logon. |
| 1.3.6.1.4.1.539.21.11 | ScalaraislcscExtProbeStatus | read-only | current | This is the state of the external temperature probe. It is either available or unavailable. |
| 1.3.6.1.4.1.539.21.12 | ScalaraislcscExtLowThreshCelsius | read-write | current | The lower threshold for the external temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent. |
| 1.3.6.1.4.1.539.21.13 | ScalaraislcscExtHighThreshCelsius | read-write | current | The upper threshold for the external temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent. |
| 1.3.6.1.4.1.539.21.14 | ScalaraislcscExtTempCelsius | read-only | current | The current external temperature (Celsius). |
| 1.3.6.1.4.1.539.21.15 | ScalaraislcscIntProbeStatus | read-only | current | This is the state of the internal temperature probe. It is either available or unavailable. |
| 1.3.6.1.4.1.539.21.16 | ScalaraislcscIntLowThreshCelsius | read-write | current | The lower threshold for the internal temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent. |
| 1.3.6.1.4.1.539.21.17 | ScalaraislcscIntHighThreshCelsius | read-write | current | The upper threshold for the internal temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent. |
| 1.3.6.1.4.1.539.21.18 | ScalaraislcscIntTempCelsius | read-only | current | The current internal temperature (Celsius). |
| 1.3.6.1.4.1.539.21.19 | ScalaraislcscExceededThresholdValue | read-only | current | The temperature sent with the last trap (Celsius). |
| 1.3.6.1.4.1.539.21.20 | TableaiSLCSysCfgKeepAliveTable | not-accessible | current | Table of IP addresses which will be pinged periodically. |
| 1.3.6.1.4.1.539.21.20.1 | RowaiSLCSysCfgKeepAliveEntry | not-accessible | current | Entry of aiSLCSysCfgKeepAliveTable. |
| 1.3.6.1.4.1.539.21.20.1.1 | ColumnaislcscKeepAliveIndex | read-only | current | Index into this table. |
| 1.3.6.1.4.1.539.21.20.1.2 | ColumnaislcscKeepAliveAddress | read-write | current | IP address of network element to ping. 0.0.0.0 indicates an unused entry. |
| 1.3.6.1.4.1.539.21.20.1.3 | ColumnaislcscKeepAliveInterval | read-write | current | Time between successive pings of the network element. Allowable values are 5 to 600 seconds. |
| 1.3.6.1.4.1.539.21.20.1.4 | ColumnaislcscKeepAliveWarningText | read-write | current | Message sent in SNMP trap when the network element stops responding to pings. Maximum length is 64 characters. |
| 1.3.6.1.4.1.539.21.20.1.5 | ColumnaislcscKeepAliveOKText | read-write | current | Message sent in SNMP trap when the network element begins responding to pings after a period of unresponsiveness. Maximum length is 64 characters. |
| 1.3.6.1.4.1.539.21.20.1.6 | ColumnaislcscKeepAliveCommStat | read-only | current | Determines the current communication status between the system and the target equipment. If the target equipment does not respond to pings, this object will be… |
| 1.3.6.1.4.1.539.21.21 | ScalaraislcscActiveConfigName | read-write | current | Name of the active configuration file. Maximum length is 255 characters; additional restrictions are system-dependent. |
| 1.3.6.1.4.1.539.21.22 | ScalaraislcscActiveConfigCRC | read-only | current | 32-bit CRC of the active configuration file. |
| 1.3.6.1.4.1.539.21.23 | ScalaraislcscSoftwareUpdateName | read-write | current | To update the system software, set this object to the name of the new image file, and monitor aislcscSoftwareUpdateStatus until it changes to ok(1) or error(3)… |
| 1.3.6.1.4.1.539.21.24 | ScalaraislcscSoftwareUpdateStatus | read-write | current | |
| 1.3.6.1.4.1.539.21.25 | ScalaraislcscResetSystem | read-write | current | When read, this object is always none(1). Setting none(1) has no effect. Setting coldStart(2) reboots the system. |
| 1.3.6.1.4.1.539.21.26 | ScalaraislcscDiscPowerSupplyStatus | read-only | current | Status of the power supply. okay(1) or trouble(2). When the SLC is booted, this indicates okay(1) until the software determines the correct status. |
| 1.3.6.1.4.1.539.21.27 | Scalaraislcsc48VSupplyAStatus | read-only | current | Status of the 'A' 48V power supply. |
| 1.3.6.1.4.1.539.21.28 | Scalaraislcsc48VSupplyBStatus | read-only | current | Status of the 'B' 48V power supply. |
| 1.3.6.1.4.1.539.21.29 | ScalaraislcscFanStatus | read-only | current | Status of the fan unit. |
| 1.3.6.1.4.1.539.21.30 | ScalaraislcscMib2ReadCommunity | read-write | current | SNMP community string for read-only access with mib-2 view. |
| 1.3.6.1.4.1.539.21.31 | ScalaraislcscOverallAlarmSeverity | read-write | current | Current overall alarm severity (0-7). This value can be set at the user's discretion, but will be overwritten when the next alarm is generated. |
| 1.3.6.1.4.1.539.21.32 | NodeaislcSysCfgTime | |||
| 1.3.6.1.4.1.539.21.32.1 | ScalaraislcscTimeZone | read-write | current | The current Time Zone of the system in the following format: <+|->HH:MM, where HH is the number of hours and MM is the number of minutes. <+/-> specifies the E… |
| 1.3.6.1.4.1.539.21.32.2 | ScalaraislcscDayLightSaving | read-write | current | Indicates whether Daylight saving is enabled. |
| 1.3.6.1.4.1.539.21.32.3 | ScalaraislcscSntpPoll | read-write | current | Indicates whether the SNTP client is enabled on this system. |
| 1.3.6.1.4.1.539.21.32.4 | ScalaraislcscNtpServerAddr1 | read-write | current | IP address of the primary NTP Server |
| 1.3.6.1.4.1.539.21.32.5 | ScalaraislcscNtpServerAddr2 | read-write | current | IP address of the secondary NTP Server |
| 1.3.6.1.4.1.539.21.32.6 | ScalaraislcscSntpPollInterval | read-write | current | SNTP poll interval in minutes |
| 1.3.6.1.4.1.539.21.33 | ScalaraislcscStandaloneStatus | read-only | current | standalone(1): The card is operating standalone (no external CLC). nonStandalone(2): The card is operating as a line card with a CLC. |
| 1.3.6.1.4.1.539.21.34 | ScalaraislcscShellPromptTimeout | read-write | current | Time in minutes before an idle shell is automatically closed. 0 indicates no timeout. |
| 1.3.6.1.4.1.539.21.35 | ScalaraislcscDestMenuBreakSeq | read-write | current | Sequence of characters to exit a connection made from the destination menu. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PositiveInteger | INTEGER (1..2147483647) |