AISPY-MIB
400 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| RFC1253-MIB | TruthValue |
| SNMPv2-SMI | Gauge32 OBJECT-IDENTITY |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1 | NodeaiSPYAlarmEntryAdded | An AlarmEntryAdded Trap signifies that the a sensor reading has reached a high or low limit value. | ||
| 1.3.6.1.4.1.539 | Nodeaii | |||
| 1.3.6.1.4.1.539.20 | NodeaiSPY | |||
| 1.3.6.1.4.1.539.20.1 | NodeaiSPYIdent | |||
| 1.3.6.1.4.1.539.20.1.1 | ScalaraiSPYIdentManufacturer | read-only | mandatory | The Monitor Control Unit manufacturer. |
| 1.3.6.1.4.1.539.20.1.2 | ScalaraiSPYIdentModel | read-only | mandatory | The Monitor Control Unit Model designation. |
| 1.3.6.1.4.1.539.20.1.3 | ScalaraiSPYIdentSoftwareVersion | read-only | mandatory | The aiSPY SNMP Agent software version. |
| 1.3.6.1.4.1.539.20.1.4 | ScalaraiSPYIdentSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular Monitor Unit being managed. This object is used to locate the product-specific MIB for this device. I… |
| 1.3.6.1.4.1.539.20.2 | NodeaiSPYSystem | |||
| 1.3.6.1.4.1.539.20.2.1 | ScalaraiSPYClock | read-write | mandatory | The aiSPY internal clock settings. Displayed as MM/DD/YY HH:MM:SS |
| 1.3.6.1.4.1.539.20.2.2 | ScalaraiSPYDoorAlarmBypass | read-write | mandatory | The aiSPY door alarm bypass switch. This allows the alarm to be bypassed upon valid keypad access. Zero disables this, or use 1 thru 20 for the corresponding a… |
| 1.3.6.1.4.1.539.20.2.3 | NodeaiSPYKeypad | |||
| 1.3.6.1.4.1.539.20.2.3.1 | ScalaraiSPYKeypadCode1 | read-write | mandatory | The aiSPY keypad access code for user #1. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.2 | ScalaraiSPYKeypadName1 | read-write | mandatory | The aiSPY keypad access name for user #1. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.3 | ScalaraiSPYKeypadCode2 | read-write | mandatory | The aiSPY keypad access code for user #2. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.4 | ScalaraiSPYKeypadName2 | read-write | mandatory | The aiSPY keypad access name for user #2. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.5 | ScalaraiSPYKeypadCode3 | read-write | mandatory | The aiSPY keypad access code for user #3. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.6 | ScalaraiSPYKeypadName3 | read-write | mandatory | The aiSPY keypad access name for user #3. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.7 | ScalaraiSPYKeypadCode4 | read-write | mandatory | The aiSPY keypad access code for user #4. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.8 | ScalaraiSPYKeypadName4 | read-write | mandatory | The aiSPY keypad access name for user #4. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.9 | ScalaraiSPYKeypadCode5 | read-write | mandatory | The aiSPY keypad access code for user #5. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.10 | ScalaraiSPYKeypadName5 | read-write | mandatory | The aiSPY keypad access name for user #5. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.11 | ScalaraiSPYKeypadCode6 | read-write | mandatory | The aiSPY keypad access code for user #6. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.12 | ScalaraiSPYKeypadName6 | read-write | mandatory | The aiSPY keypad access name for user #6. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.13 | ScalaraiSPYKeypadCode7 | read-write | mandatory | The aiSPY keypad access code for user #7. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.14 | ScalaraiSPYKeypadName7 | read-write | mandatory | The aiSPY keypad access name for user #7. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.15 | ScalaraiSPYKeypadCode8 | read-write | mandatory | The aiSPY keypad access code for user #8. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.16 | ScalaraiSPYKeypadName8 | read-write | mandatory | The aiSPY keypad access name for user #8. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.17 | ScalaraiSPYKeypadCode9 | read-write | mandatory | The aiSPY keypad access code for user #9. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.18 | ScalaraiSPYKeypadName9 | read-write | mandatory | The aiSPY keypad access name for user #9. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.19 | ScalaraiSPYKeypadCode10 | read-write | mandatory | The aiSPY keypad access code for user #10. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.20 | ScalaraiSPYKeypadName10 | read-write | mandatory | The aiSPY keypad access name for user #10. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.21 | ScalaraiSPYKeypadCode11 | read-write | mandatory | The aiSPY keypad access code for user #11. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.22 | ScalaraiSPYKeypadName11 | read-write | mandatory | The aiSPY keypad access name for user #11. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.23 | ScalaraiSPYKeypadCode12 | read-write | mandatory | The aiSPY keypad access code for user #12. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.24 | ScalaraiSPYKeypadName12 | read-write | mandatory | The aiSPY keypad access name for user #12. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.25 | ScalaraiSPYKeypadCode13 | read-write | mandatory | The aiSPY keypad access code for user #13. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.26 | ScalaraiSPYKeypadName13 | read-write | mandatory | The aiSPY keypad access name for user #13. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.27 | ScalaraiSPYKeypadCode14 | read-write | mandatory | The aiSPY keypad access code for user #14. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.28 | ScalaraiSPYKeypadName14 | read-write | mandatory | The aiSPY keypad access name for user #14. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.29 | ScalaraiSPYKeypadCode15 | read-write | mandatory | The aiSPY keypad access code for user #15. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.30 | ScalaraiSPYKeypadName15 | read-write | mandatory | The aiSPY keypad access name for user #15. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.31 | ScalaraiSPYKeypadCode16 | read-write | mandatory | The aiSPY keypad access code for user #16. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.32 | ScalaraiSPYKeypadName16 | read-write | mandatory | The aiSPY keypad access name for user #16. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.33 | ScalaraiSPYKeypadCode17 | read-write | mandatory | The aiSPY keypad access code for user #17. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.34 | ScalaraiSPYKeypadName17 | read-write | mandatory | The aiSPY keypad access name for user #17. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.35 | ScalaraiSPYKeypadCode18 | read-write | mandatory | The aiSPY keypad access code for user #18. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.36 | ScalaraiSPYKeypadName18 | read-write | mandatory | The aiSPY keypad access name for user #18. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.37 | ScalaraiSPYKeypadCode19 | read-write | mandatory | The aiSPY keypad access code for user #19. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.38 | ScalaraiSPYKeypadName19 | read-write | mandatory | The aiSPY keypad access name for user #19. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.3.39 | ScalaraiSPYKeypadCode20 | read-write | mandatory | The aiSPY keypad access code for user #20. This can be up to six numeric characters. |
| 1.3.6.1.4.1.539.20.2.3.40 | ScalaraiSPYKeypadName20 | read-write | mandatory | The aiSPY keypad access name for user #20. This can be up to 20 characters. |
| 1.3.6.1.4.1.539.20.2.4 | ScalaraiSPYInputVoltage | read-only | mandatory | The aiSPY input voltage (DC Power). |
| 1.3.6.1.4.1.539.20.2.5 | ScalaraiSPYOnBattery | read-write | mandatory | The state of use of the On Battery Alarm. When the State is set to installed(1), the On Battery and Low Battery alarms are enabled. This variable is stored in … |
| 1.3.6.1.4.1.539.20.2.6 | ScalaraiSPYLowBatteryThreshold | read-write | mandatory | The low voltage trip point for the low battery alarm. When the input voltage goes below this voltage, the Low Battery alarm is set. This variable is stored in … |
| 1.3.6.1.4.1.539.20.2.7 | ScalaraiSPYAnalogAverage | read-write | mandatory | This is the analog averaging duration in seconds. The analog input readings are averaged for this time period before updating. This value must be set to 1,2,3,… |
| 1.3.6.1.4.1.539.20.3 | NodeaiSPY8124 | |||
| 1.3.6.1.4.1.539.20.3 | NodeaiSPYInputs | |||
| 1.3.6.1.4.1.539.20.3.1 | NodeaiSPYInput1 | |||
| 1.3.6.1.4.1.539.20.3.1.1 | ScalaraiSPYInput1State | read-write | mandatory | The state of use of Input Number 1. When a sensor is connected to Input 1 set State to installed(2) to indicate that the value of aiSPYReading1 is valid. When … |
| 1.3.6.1.4.1.539.20.3.1.2 | ScalaraiSPYInput1Reading | read-only | mandatory | The reading for sensor 1. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.1.3 | ScalaraiSPYInput1Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 1 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.1.4 | ScalaraiSPYInput1Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 1 to obtain the value of the Input1… |
| 1.3.6.1.4.1.539.20.3.1.5 | ScalaraiSPYInput1Label | read-write | mandatory | A user-defined text string associated with Input Number 1. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.1.6 | ScalaraiSPYInput1UOM | read-write | mandatory | A user-defined text string associated with Input Number 1. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.1.7 | ScalaraiSPYInput1HighLimit | read-write | mandatory | When input 1 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 1. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.1.8 | ScalaraiSPYInput1LowLimit | read-write | mandatory | When input 1 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 1. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.1.9 | ScalaraiSPYInput1RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.1.10 | ScalaraiSPYInput1Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.1.11 | ScalaraiSPYInput1RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.1.12 | ScalaraiSPYInput1Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.2 | NodeaiSPYInput2 | |||
| 1.3.6.1.4.1.539.20.3.2.1 | ScalaraiSPYInput2State | read-write | mandatory | The state of use of Input Number 2. When a sensor is connected to Input 2 set State to installed(2) to indicate that the value of aiSPYReading2 is valid. When … |
| 1.3.6.1.4.1.539.20.3.2.2 | ScalaraiSPYInput2Reading | read-only | mandatory | The reading for sensor 2. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.2.3 | ScalaraiSPYInput2Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 2 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.2.4 | ScalaraiSPYInput2Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 2 to obtain the value of the Input2… |
| 1.3.6.1.4.1.539.20.3.2.5 | ScalaraiSPYInput2Label | read-write | mandatory | A user-defined text string associated with Input Number 2. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.2.6 | ScalaraiSPYInput2UOM | read-write | mandatory | A user-defined text string associated with Input Number 2. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.2.7 | ScalaraiSPYInput2HighLimit | read-write | mandatory | When input 2 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 2. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.2.8 | ScalaraiSPYInput2LowLimit | read-write | mandatory | When input 2 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 2. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.2.9 | ScalaraiSPYInput2RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.2.10 | ScalaraiSPYInput2Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.2.11 | ScalaraiSPYInput2RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.2.12 | ScalaraiSPYInput2Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.3 | NodeaiSPYInput3 | |||
| 1.3.6.1.4.1.539.20.3.3.1 | ScalaraiSPYInput3State | read-write | mandatory | The state of use of Input Number 3. When a sensor is connected to Input 3 set State to installed(2) to indicate that the value of aiSPYReading3 is valid. When … |
| 1.3.6.1.4.1.539.20.3.3.2 | ScalaraiSPYInput3Reading | read-only | mandatory | The reading for sensor 3. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.3.3 | ScalaraiSPYInput3Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 3 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.3.4 | ScalaraiSPYInput3Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 3 to obtain the value of the Input3… |
| 1.3.6.1.4.1.539.20.3.3.5 | ScalaraiSPYInput3Label | read-write | mandatory | A user-defined text string associated with Input Number 3. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.3.6 | ScalaraiSPYInput3UOM | read-write | mandatory | A user-defined text string associated with Input Number 3. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.3.7 | ScalaraiSPYInput3HighLimit | read-write | mandatory | When input 3 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 3. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.3.8 | ScalaraiSPYInput3LowLimit | read-write | mandatory | When input 3 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 3. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.3.9 | ScalaraiSPYInput3RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.3.10 | ScalaraiSPYInput3Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.3.11 | ScalaraiSPYInput3RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.3.12 | ScalaraiSPYInput3Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.4 | NodeaiSPYInput4 | |||
| 1.3.6.1.4.1.539.20.3.4.1 | ScalaraiSPYInput4State | read-write | mandatory | The state of use of Input Number 4. When a sensor is connected to Input 4 set State to installed(2) to indicate that the value of aiSPYReading4 is valid. When … |
| 1.3.6.1.4.1.539.20.3.4.2 | ScalaraiSPYInput4Reading | read-only | mandatory | The reading for sensor 4. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.4.3 | ScalaraiSPYInput4Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 4 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.4.4 | ScalaraiSPYInput4Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 4 to obtain the value of the Input4… |
| 1.3.6.1.4.1.539.20.3.4.5 | ScalaraiSPYInput4Label | read-write | mandatory | A user-defined text string associated with Input Number 4. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.4.6 | ScalaraiSPYInput4UOM | read-write | mandatory | A user-defined text string associated with Input Number 4. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.4.7 | ScalaraiSPYInput4HighLimit | read-write | mandatory | When input 4 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 4. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.4.8 | ScalaraiSPYInput4LowLimit | read-write | mandatory | When input 4 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 4. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.4.9 | ScalaraiSPYInput4RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.4.10 | ScalaraiSPYInput4Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.4.11 | ScalaraiSPYInput4RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.4.12 | ScalaraiSPYInput4Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.5 | NodeaiSPYInput5 | |||
| 1.3.6.1.4.1.539.20.3.5.1 | ScalaraiSPYInput5State | read-write | mandatory | The state of use of Input Number 5. When a sensor is connected to Input 5 set State to installed(2) to indicate that the value of aiSPYReading4 is valid. When … |
| 1.3.6.1.4.1.539.20.3.5.2 | ScalaraiSPYInput5Reading | read-only | mandatory | The reading for sensor 5. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.5.3 | ScalaraiSPYInput5Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 5 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.5.4 | ScalaraiSPYInput5Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 5 to obtain the value of the Input5… |
| 1.3.6.1.4.1.539.20.3.5.5 | ScalaraiSPYInput5Label | read-write | mandatory | A user-defined text string associated with Input Number 5. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.5.6 | ScalaraiSPYInput5UOM | read-write | mandatory | A user-defined text string associated with Input Number 5. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.5.7 | ScalaraiSPYInput5HighLimit | read-write | mandatory | When input 5 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 5. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.5.8 | ScalaraiSPYInput5LowLimit | read-write | mandatory | When input 5 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 5. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.5.9 | ScalaraiSPYInput5RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.5.10 | ScalaraiSPYInput5Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.5.11 | ScalaraiSPYInput5RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.5.12 | ScalaraiSPYInput5Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.6 | NodeaiSPYInput6 | |||
| 1.3.6.1.4.1.539.20.3.6.1 | ScalaraiSPYInput6State | read-write | mandatory | The state of use of Input Number 6. When a sensor is connected to Input 6 set State to installed(2) to indicate that the value of aiSPYReading6 is valid. When … |
| 1.3.6.1.4.1.539.20.3.6.2 | ScalaraiSPYInput6Reading | read-only | mandatory | The reading for sensor 6. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.6.3 | ScalaraiSPYInput6Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 6 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.6.4 | ScalaraiSPYInput6Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 6 to obtain the value of the Input6… |
| 1.3.6.1.4.1.539.20.3.6.5 | ScalaraiSPYInput6Label | read-write | mandatory | A user-defined text string associated with Input Number 6. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.6.6 | ScalaraiSPYInput6UOM | read-write | mandatory | A user-defined text string associated with Input Number 6. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.6.7 | ScalaraiSPYInput6HighLimit | read-write | mandatory | When input 6 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 6. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.6.8 | ScalaraiSPYInput6LowLimit | read-write | mandatory | When input 6 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 6. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.6.9 | ScalaraiSPYInput6RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.6.10 | ScalaraiSPYInput6Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.6.11 | ScalaraiSPYInput6RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.6.12 | ScalaraiSPYInput6Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.7 | NodeaiSPYInput7 | |||
| 1.3.6.1.4.1.539.20.3.7.1 | ScalaraiSPYInput7State | read-write | mandatory | The state of use of Input Number 7. When a sensor is connected to Input 7 set State to installed(2) to indicate that the value of aiSPYReading4 is valid. When … |
| 1.3.6.1.4.1.539.20.3.7.2 | ScalaraiSPYInput7Reading | read-only | mandatory | The reading for sensor 7. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.7.3 | ScalaraiSPYInput7Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 7 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.7.4 | ScalaraiSPYInput7Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 7 to obtain the value of the Input7… |
| 1.3.6.1.4.1.539.20.3.7.5 | ScalaraiSPYInput7Label | read-write | mandatory | A user-defined text string associated with Input Number 7. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.7.6 | ScalaraiSPYInput7UOM | read-write | mandatory | A user-defined text string associated with Input Number 7. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.7.7 | ScalaraiSPYInput7HighLimit | read-write | mandatory | When input 7 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 7. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.7.8 | ScalaraiSPYInput7LowLimit | read-write | mandatory | When input 7 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 7. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.7.9 | ScalaraiSPYInput7RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.7.10 | ScalaraiSPYInput7Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.7.11 | ScalaraiSPYInput7RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.7.12 | ScalaraiSPYInput7Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.8 | NodeaiSPYInput8 | |||
| 1.3.6.1.4.1.539.20.3.8.1 | ScalaraiSPYInput8State | read-write | mandatory | The state of use of Input Number 8. When a sensor is connected to Input 8 set State to installed(2) to indicate that the value of aiSPYReading8 is valid. When … |
| 1.3.6.1.4.1.539.20.3.8.2 | ScalaraiSPYInput8Reading | read-only | mandatory | The reading for sensor 8. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.8.3 | ScalaraiSPYInput8Gain | read-write | mandatory | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 8 to obtain the value of the Input… |
| 1.3.6.1.4.1.539.20.3.8.4 | ScalaraiSPYInput8Offset | read-write | mandatory | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 8 to obtain the value of the Input8… |
| 1.3.6.1.4.1.539.20.3.8.5 | ScalaraiSPYInput8Label | read-write | mandatory | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.8.6 | ScalaraiSPYInput8UOM | read-write | mandatory | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.8.7 | ScalaraiSPYInput8HighLimit | read-write | mandatory | When input 8 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 8. The HighLimit variable is stored in non-vola… |
| 1.3.6.1.4.1.539.20.3.8.8 | ScalaraiSPYInput8LowLimit | read-write | mandatory | When input 8 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 8. The LowLimit variable is stored in non-vol… |
| 1.3.6.1.4.1.539.20.3.8.9 | ScalaraiSPYInput8RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.8.10 | ScalaraiSPYInput8Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.8.11 | ScalaraiSPYInput8RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.8.12 | ScalaraiSPYInput8Hysteresis | read-write | mandatory | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will clear. This variable is stored in… |
| 1.3.6.1.4.1.539.20.3.25 | NodeaiSPYInput9 | |||
| 1.3.6.1.4.1.539.20.3.25.1 | ScalaraiSPYInput9State | read-write | mandatory | The state of use of Input Number 9. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.25.2 | ScalaraiSPYInput9Reading | read-only | mandatory | The reading for input 9. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.25.3 | ScalaraiSPYInput9Label | read-write | mandatory | A user-defined text string associated with Input Number 9. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.25.4 | ScalaraiSPYInput9RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.25.5 | ScalaraiSPYInput9Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.25.6 | ScalaraiSPYInput9RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.26 | NodeaiSPYInput10 | |||
| 1.3.6.1.4.1.539.20.3.26.1 | ScalaraiSPYInput10State | read-write | mandatory | The state of use of Input Number 10. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.26.2 | ScalaraiSPYInput10Reading | read-only | mandatory | The reading for input 10. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.26.3 | ScalaraiSPYInput10Label | read-write | mandatory | A user-defined text string associated with Input Number 10. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.26.4 | ScalaraiSPYInput10RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.26.5 | ScalaraiSPYInput10Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.26.6 | ScalaraiSPYInput10RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.27 | NodeaiSPYInput11 | |||
| 1.3.6.1.4.1.539.20.3.27.1 | ScalaraiSPYInput11State | read-write | mandatory | The state of use of Input Number 11. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.27.2 | ScalaraiSPYInput11Reading | read-only | mandatory | The reading for input 11. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.27.3 | ScalaraiSPYInput11Label | read-write | mandatory | A user-defined text string associated with Input Number 11. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.27.4 | ScalaraiSPYInput11RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.27.5 | ScalaraiSPYInput11Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.27.6 | ScalaraiSPYInput11RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.28 | NodeaiSPYInput12 | |||
| 1.3.6.1.4.1.539.20.3.28.1 | ScalaraiSPYInput12State | read-write | mandatory | The state of use of Input Number 12. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.28.2 | ScalaraiSPYInput12Reading | read-only | mandatory | The reading for input 12. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.28.3 | ScalaraiSPYInput12Label | read-write | mandatory | A user-defined text string associated with Input Number 12. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.28.4 | ScalaraiSPYInput12RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.28.5 | ScalaraiSPYInput12Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.28.6 | ScalaraiSPYInput12RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.29 | NodeaiSPYInput13 | |||
| 1.3.6.1.4.1.539.20.3.29.1 | ScalaraiSPYInput13State | read-write | mandatory | The state of use of Input Number 13. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.29.2 | ScalaraiSPYInput13Reading | read-only | mandatory | The reading for input 13. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.29.3 | ScalaraiSPYInput13Label | read-write | mandatory | A user-defined text string associated with Input Number 13. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.29.4 | ScalaraiSPYInput13RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.29.5 | ScalaraiSPYInput13Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.29.6 | ScalaraiSPYInput13RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.30 | NodeaiSPYInput14 | |||
| 1.3.6.1.4.1.539.20.3.30.1 | ScalaraiSPYInput14State | read-write | mandatory | The state of use of Input Number 14. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.30.2 | ScalaraiSPYInput14Reading | read-only | mandatory | The reading for input 14. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.30.3 | ScalaraiSPYInput14Label | read-write | mandatory | A user-defined text string associated with Input Number 14. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.30.4 | ScalaraiSPYInput14RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.30.5 | ScalaraiSPYInput14Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.30.6 | ScalaraiSPYInput14RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.31 | NodeaiSPYInput15 | |||
| 1.3.6.1.4.1.539.20.3.31.1 | ScalaraiSPYInput15State | read-write | mandatory | The state of use of Input Number 15. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.31.2 | ScalaraiSPYInput15Reading | read-only | mandatory | The reading for input 15. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.31.3 | ScalaraiSPYInput15Label | read-write | mandatory | A user-defined text string associated with Input Number 15. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.31.4 | ScalaraiSPYInput15RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.31.5 | ScalaraiSPYInput15Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.31.6 | ScalaraiSPYInput15RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.32 | NodeaiSPYInput16 | |||
| 1.3.6.1.4.1.539.20.3.32.1 | ScalaraiSPYInput16State | read-write | mandatory | The state of use of Input Number 16. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.32.2 | ScalaraiSPYInput16Reading | read-only | mandatory | The reading for input 16. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.32.3 | ScalaraiSPYInput16Label | read-write | mandatory | A user-defined text string associated with Input Number 16. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.32.4 | ScalaraiSPYInput16RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.32.5 | ScalaraiSPYInput16Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.32.6 | ScalaraiSPYInput16RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.33 | NodeaiSPYInput17 | |||
| 1.3.6.1.4.1.539.20.3.33.1 | ScalaraiSPYInput17State | read-write | mandatory | The state of use of Input Number 17. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.33.2 | ScalaraiSPYInput17Reading | read-only | mandatory | The reading for input 17. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.33.3 | ScalaraiSPYInput17Label | read-write | mandatory | A user-defined text string associated with Input Number 17. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.33.4 | ScalaraiSPYInput17RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.33.5 | ScalaraiSPYInput17Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.33.6 | ScalaraiSPYInput17RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.34 | NodeaiSPYInput18 | |||
| 1.3.6.1.4.1.539.20.3.34.1 | ScalaraiSPYInput18State | read-write | mandatory | The state of use of Input Number 18. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.34.2 | ScalaraiSPYInput18Reading | read-only | mandatory | The reading for input 18. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.34.3 | ScalaraiSPYInput18Label | read-write | mandatory | A user-defined text string associated with Input Number 18. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.34.4 | ScalaraiSPYInput18RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.34.5 | ScalaraiSPYInput18Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.34.6 | ScalaraiSPYInput18RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.35 | NodeaiSPYInput19 | |||
| 1.3.6.1.4.1.539.20.3.35.1 | ScalaraiSPYInput19State | read-write | mandatory | The state of use of Input Number 19. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.35.2 | ScalaraiSPYInput19Reading | read-only | mandatory | The reading for input 19. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.35.3 | ScalaraiSPYInput19Label | read-write | mandatory | A user-defined text string associated with Input Number 19. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.35.4 | ScalaraiSPYInput19RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.35.5 | ScalaraiSPYInput19Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.35.6 | ScalaraiSPYInput19RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.36 | NodeaiSPYInput20 | |||
| 1.3.6.1.4.1.539.20.3.36.1 | ScalaraiSPYInput20State | read-write | mandatory | The state of use of Input Number 20. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.36.2 | ScalaraiSPYInput20Reading | read-only | mandatory | The reading for input 20. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.36.3 | ScalaraiSPYInput20Label | read-write | mandatory | A user-defined text string associated with Input Number 20. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.36.4 | ScalaraiSPYInput20RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.36.5 | ScalaraiSPYInput20Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.36.6 | ScalaraiSPYInput20RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.37 | NodeaiSPYInput21 | |||
| 1.3.6.1.4.1.539.20.3.37.1 | ScalaraiSPYInput21State | read-write | mandatory | The state of use of Input Number 21. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.37.2 | ScalaraiSPYInput21Reading | read-only | mandatory | The reading for input 21. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.37.3 | ScalaraiSPYInput21Label | read-write | mandatory | A user-defined text string associated with Input Number 21. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.37.4 | ScalaraiSPYInput21RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.37.5 | ScalaraiSPYInput21Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.37.6 | ScalaraiSPYInput21RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.38 | NodeaiSPYInput22 | |||
| 1.3.6.1.4.1.539.20.3.38.1 | ScalaraiSPYInput22State | read-write | mandatory | The state of use of Input Number 22. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.38.2 | ScalaraiSPYInput22Reading | read-only | mandatory | The reading for input 22. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.38.3 | ScalaraiSPYInput22Label | read-write | mandatory | A user-defined text string associated with Input Number 22. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.38.4 | ScalaraiSPYInput22RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.38.5 | ScalaraiSPYInput22Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.38.6 | ScalaraiSPYInput22RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.39 | NodeaiSPYInput23 | |||
| 1.3.6.1.4.1.539.20.3.39.1 | ScalaraiSPYInput23State | read-write | mandatory | The state of use of Input Number 23. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.39.2 | ScalaraiSPYInput23Reading | read-only | mandatory | The reading for input 23. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.39.3 | ScalaraiSPYInput23Label | read-write | mandatory | A user-defined text string associated with Input Number 23. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.39.4 | ScalaraiSPYInput23RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.39.5 | ScalaraiSPYInput23Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.39.6 | ScalaraiSPYInput23RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.40 | NodeaiSPYInput24 | |||
| 1.3.6.1.4.1.539.20.3.40.1 | ScalaraiSPYInput24State | read-write | mandatory | The state of use of Input Number 24. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.40.2 | ScalaraiSPYInput24Reading | read-only | mandatory | The reading for input 24. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.40.3 | ScalaraiSPYInput24Label | read-write | mandatory | A user-defined text string associated with Input Number 24. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.40.4 | ScalaraiSPYInput24RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.40.5 | ScalaraiSPYInput24Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.40.6 | ScalaraiSPYInput24RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.41 | NodeaiSPYInput25 | |||
| 1.3.6.1.4.1.539.20.3.41.1 | ScalaraiSPYInput25State | read-write | mandatory | The state of use of Input Number 25. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.41.2 | ScalaraiSPYInput25Reading | read-only | mandatory | The reading for input 25. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.41.3 | ScalaraiSPYInput25Label | read-write | mandatory | A user-defined text string associated with Input Number 25. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.41.4 | ScalaraiSPYInput25RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.41.5 | ScalaraiSPYInput25Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.41.6 | ScalaraiSPYInput25RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.42 | NodeaiSPYInput26 | |||
| 1.3.6.1.4.1.539.20.3.42.1 | ScalaraiSPYInput26State | read-write | mandatory | The state of use of Input Number 26. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.42.2 | ScalaraiSPYInput26Reading | read-only | mandatory | The reading for input 26. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.42.3 | ScalaraiSPYInput26Label | read-write | mandatory | A user-defined text string associated with Input Number 26. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.42.4 | ScalaraiSPYInput26RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.42.5 | ScalaraiSPYInput26Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.42.6 | ScalaraiSPYInput26RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.43 | NodeaiSPYInput27 | |||
| 1.3.6.1.4.1.539.20.3.43.1 | ScalaraiSPYInput27State | read-write | mandatory | The state of use of Input Number 27. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.43.2 | ScalaraiSPYInput27Reading | read-only | mandatory | The reading for input 27. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.43.3 | ScalaraiSPYInput27Label | read-write | mandatory | A user-defined text string associated with Input Number 27. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.43.4 | ScalaraiSPYInput27RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.43.5 | ScalaraiSPYInput27Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.43.6 | ScalaraiSPYInput27RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.3.44 | NodeaiSPYInput28 | |||
| 1.3.6.1.4.1.539.20.3.44.1 | ScalaraiSPYInput28State | read-write | mandatory | The state of use of Input Number 28. This variable is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.44.2 | ScalaraiSPYInput28Reading | read-only | mandatory | The reading for input 28. The reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.539.20.3.44.3 | ScalaraiSPYInput28Label | read-write | mandatory | A user-defined text string associated with Input Number 28. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.3.44.4 | ScalaraiSPYInput28RlyControl | read-write | mandatory | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2… |
| 1.3.6.1.4.1.539.20.3.44.5 | ScalaraiSPYInput28Delay | read-write | mandatory | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-volatile… |
| 1.3.6.1.4.1.539.20.3.44.6 | ScalaraiSPYInput28RTNDelay | read-write | mandatory | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. This variable is stored in non-v… |
| 1.3.6.1.4.1.539.20.4 | NodeaiSPYOutputs | |||
| 1.3.6.1.4.1.539.20.4.1 | NodeaiSPYRelay1 | |||
| 1.3.6.1.4.1.539.20.4.1.1 | ScalaraiSPYRelay1State | read-write | mandatory | The state of use of Relay Number 1. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.1.2 | ScalaraiSPYRelay1Status | read-only | mandatory | The current status for relay 1. |
| 1.3.6.1.4.1.539.20.4.1.3 | ScalaraiSPYRelay1Label | read-write | mandatory | A user-defined text string associated with Relay Number 1. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.1.4 | ScalaraiSPYRelay1Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.4.2 | NodeaiSPYRelay2 | |||
| 1.3.6.1.4.1.539.20.4.2.1 | ScalaraiSPYRelay2State | read-write | mandatory | The state of use of Relay Number 2. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.2.2 | ScalaraiSPYRelay2Status | read-only | mandatory | The current status for relay 2. |
| 1.3.6.1.4.1.539.20.4.2.3 | ScalaraiSPYRelay2Label | read-write | mandatory | A user-defined text string associated with Relay Number 2. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.2.4 | ScalaraiSPYRelay2Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.4.3 | NodeaiSPYRelay3 | |||
| 1.3.6.1.4.1.539.20.4.3.1 | ScalaraiSPYRelay3State | read-write | mandatory | The state of use of Relay Number 3. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.3.2 | ScalaraiSPYRelay3Status | read-only | mandatory | The current status for relay 3. |
| 1.3.6.1.4.1.539.20.4.3.3 | ScalaraiSPYRelay3Label | read-write | mandatory | A user-defined text string associated with Relay Number 3. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.3.4 | ScalaraiSPYRelay3Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.4.4 | NodeaiSPYRelay4 | |||
| 1.3.6.1.4.1.539.20.4.4.1 | ScalaraiSPYRelay4State | read-write | mandatory | The state of use of Relay Number 4. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.4.2 | ScalaraiSPYRelay4Status | read-only | mandatory | The current status for relay 4. |
| 1.3.6.1.4.1.539.20.4.4.3 | ScalaraiSPYRelay4Label | read-write | mandatory | A user-defined text string associated with Relay Number 4. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.4.4 | ScalaraiSPYRelay4Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.4.5 | NodeaiSPYRelay5 | |||
| 1.3.6.1.4.1.539.20.4.5.1 | ScalaraiSPYRelay5State | read-write | mandatory | The state of use of Relay Number 5. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.5.2 | ScalaraiSPYRelay5Status | read-only | mandatory | The current status for relay 5. |
| 1.3.6.1.4.1.539.20.4.5.3 | ScalaraiSPYRelay5Label | read-write | mandatory | A user-defined text string associated with Relay Number 5. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.5.4 | ScalaraiSPYRelay5Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.4.6 | NodeaiSPYRelay6 | |||
| 1.3.6.1.4.1.539.20.4.6.1 | ScalaraiSPYRelay6State | read-write | mandatory | The state of use of Relay Number 6. The relay can be set for normally open or closed. The relay can be forced to an on or off condition, or controlled by the k… |
| 1.3.6.1.4.1.539.20.4.6.2 | ScalaraiSPYRelay6Status | read-only | mandatory | The current status for relay 6. |
| 1.3.6.1.4.1.539.20.4.6.3 | ScalaraiSPYRelay6Label | read-write | mandatory | A user-defined text string associated with Relay Number 6. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.4.6.4 | ScalaraiSPYRelay6Time | read-write | mandatory | The number of seconds the relay will be activated. Set this to -1 for indefinitely. |
| 1.3.6.1.4.1.539.20.5 | NodeaiSPYAlarms | |||
| 1.3.6.1.4.1.539.20.5.1 | ScalaraiSPYAlarmsPresent | read-only | current | The present number of active alarm conditions. |
| 1.3.6.1.4.1.539.20.5.2 | TableaiSPYAlarmTable | not-accessible | current | A list of alarm table entries. The table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect. The table is … |
| 1.3.6.1.4.1.539.20.5.2.1 | RowaiSPYAlarmEntry | not-accessible | current | An entry containing information applicable to a particular alarm. |
| 1.3.6.1.4.1.539.20.5.2.1.1 | ColumnaiSPYAlarmId | not-accessible | current | A unique identifier for an alarm condition. This value must remain constant. |
| 1.3.6.1.4.1.539.20.5.2.1.2 | ColumnaiSPYAlarmDescr | read-only | current | A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm con… |
| 1.3.6.1.4.1.539.20.5.3 | NodeaiSPYWellKnownAlarms | |||
| 1.3.6.1.4.1.539.20.5.3.1 | IdentityaiSPYInput1HighAlarm | current | The reading for sensor 1 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.2 | IdentityaiSPYInput1LowAlarm | current | The reading for sensor 1 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.3 | IdentityaiSPYInput2HighAlarm | current | The reading for sensor 2 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.4 | IdentityaiSPYInput2LowAlarm | current | The reading for sensor 2 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.5 | IdentityaiSPYInput3HighAlarm | current | The reading for sensor 3 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.6 | IdentityaiSPYInput3LowAlarm | current | The reading for sensor 3 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.7 | IdentityaiSPYInput4HighAlarm | current | The reading for sensor 4 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.8 | IdentityaiSPYInput4LowAlarm | current | The reading for sensor 4 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.9 | IdentityaiSPYInput5HighAlarm | current | The reading for sensor 5 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.10 | IdentityaiSPYInput5LowAlarm | current | The reading for sensor 5 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.11 | IdentityaiSPYInput6HighAlarm | current | The reading for sensor 6 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.12 | IdentityaiSPYInput6LowAlarm | current | The reading for sensor 6 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.13 | IdentityaiSPYInput7HighAlarm | current | The reading for sensor 7 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.14 | IdentityaiSPYInput7LowAlarm | current | The reading for sensor 7 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.15 | IdentityaiSPYInput8HighAlarm | current | The reading for sensor 8 has reached the high limit value. | |
| 1.3.6.1.4.1.539.20.5.3.16 | IdentityaiSPYInput8LowAlarm | current | The reading for sensor 8 has reached the low limit value. | |
| 1.3.6.1.4.1.539.20.5.3.17 | IdentityaiSPYInput1DigAlarm | current | The digital input 1 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.18 | IdentityaiSPYInput2DigAlarm | current | The digital input 2 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.19 | IdentityaiSPYInput3DigAlarm | current | The digital input 3 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.20 | IdentityaiSPYInput4DigAlarm | current | The digital input 4 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.21 | IdentityaiSPYInput5DigAlarm | current | The digital input 5 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.22 | IdentityaiSPYInput6DigAlarm | current | The digital input 6 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.23 | IdentityaiSPYInput7DigAlarm | current | The digital input 7 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.24 | IdentityaiSPYInput8DigAlarm | current | The digital input 8 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.25 | IdentityaiSPYInput9DigAlarm | current | The digital input 9 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.26 | IdentityaiSPYInput10DigAlarm | current | The digital input 10 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.27 | IdentityaiSPYInput11DigAlarm | current | The digital input 11 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.28 | IdentityaiSPYInput12DigAlarm | current | The digital input 12 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.29 | IdentityaiSPYInput13DigAlarm | current | The digital input 13 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.30 | IdentityaiSPYInput14DigAlarm | current | The digital input 14 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.31 | IdentityaiSPYInput15DigAlarm | current | The digital input 15 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.32 | IdentityaiSPYInput16DigAlarm | current | The digital input 16 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.33 | IdentityaiSPYInput17DigAlarm | current | The digital input 17 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.34 | IdentityaiSPYInput18DigAlarm | current | The digital input 18 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.35 | IdentityaiSPYInput19DigAlarm | current | The digital input 19 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.36 | IdentityaiSPYInput20DigAlarm | current | The digital input 20 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.37 | IdentityaiSPYInput21DigAlarm | current | The digital input 21 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.38 | IdentityaiSPYInput22DigAlarm | current | The digital input 22 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.39 | IdentityaiSPYInput23DigAlarm | current | The digital input 23 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.40 | IdentityaiSPYInput24DigAlarm | current | The digital input 24 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.41 | IdentityaiSPYInput25DigAlarm | current | The digital input 25 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.42 | IdentityaiSPYInput26DigAlarm | current | The digital input 26 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.43 | IdentityaiSPYInput27DigAlarm | current | The digital input 27 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.44 | IdentityaiSPYInput28DigAlarm | current | The digital input 28 has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.96 | IdentityaiSPYOnBatteryAlarm | current | The On Battery input has been activated. | |
| 1.3.6.1.4.1.539.20.5.3.97 | IdentityaiSPYLowBatteryAlarm | current | The aiSPY has detected a low battery condition. | |
| 1.3.6.1.4.1.539.20.6 | NodeaiSPYTraps | |||
| 1.3.6.1.4.1.539.20.7 | NodeaiSPYAlarmHistory | |||
| 1.3.6.1.4.1.539.20.7.1 | ScalaraiSPYAlarmHistoryEntries | read-only | current | The present number of entries in the alarm history. |
| 1.3.6.1.4.1.539.20.7.2 | ScalaraiSPYAlarmHistoryClear | read-write | mandatory | Setting this value to ClearBuffer(1) will clear the alarm history buffer. |
| 1.3.6.1.4.1.539.20.7.3 | TableaiSPYAlarmHistoryTable | not-accessible | current | A list of alarm history table entries stored in the in the non-volatile memory. The table contains zero, one, or many rows at any moment, depending upon the nu… |
| 1.3.6.1.4.1.539.20.7.3.1 | RowaiSPYAlarmHistoryEntry | not-accessible | current | An entry containing information applicable to a particular alarm history entry. |
| 1.3.6.1.4.1.539.20.7.3.1.1 | ColumnaiSPYAlarmHistoryId | not-accessible | current | A unique identifier for an alarm event. This value must remain constant. |
| 1.3.6.1.4.1.539.20.7.3.1.2 | ColumnaiSPYAlarmHistoryText | read-only | current | A text desciption of the alarm history entry. Each of the strings will have the following format, AHxxx-id-type-timestamp label xxx = number entry in the table… |
| 1.3.6.1.4.1.539.20.8 | NodeaiSPYTrapSettings | |||
| 1.3.6.1.4.1.539.20.8.1 | ScalaraiSPYPersistantTraps | read-write | mandatory | The number of minutes between persistant traps. Set this to 0 to turn off persistant traps. This value is stored in non-volatile memory. |
| 1.3.6.1.4.1.539.20.8.2 | ScalaraiSPYAlarmAcknowledge | read-write | mandatory | Setting this value to AcknowledgeAlarms(1) will stop the aiSPY from sending persistant traps and dial out sequences. |
| 2 | NodeaiSPYAlarmEntryRemoved | An AlarmEntryAdded Trap signifies that the a sensor reading has gone below the high limit value or above the low limit value. | ||
| 3 | NodeaiSPYAccessGranted | An aiSPYAccessGranted Trap signifies that a valid key code sequence was processed by the aiSPY. | ||
| 4 | NodeaiSPYAccessDenied | An aiSPYAccessedDenied Trap signifies that an invalid key code sequence was processed by the aiSPY. |