ALTEON-PRIVATE-MIBS

1027 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC1155-SMI	Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks
RFC1213-MIB	DisplayString PhysAddress
SNMPv2-SMI	Counter64

OID	Name	Access	Status	Description
1.3.6.1.4.1.1872	Nodealteon
1.3.6.1.4.1.1872.1	Noderegistration
1.3.6.1.4.1.1872.2	Nodeprivate-mibs
1.3.6.1.4.1.1872.2.1	Nodeswitch
1.3.6.1.4.1.1872.2.1.1	Nodehardware
1.3.6.1.4.1.1872.2.1.1.1	ScalarhwPartNumber	read-only	mandatory	The hardware part number of the Alteon Switch.
1.3.6.1.4.1.1872.2.1.1.2	ScalarhwRevision	read-only	mandatory	The hardware revision. If the revision is not available, a zero length string should be returned.
1.3.6.1.4.1.1872.2.1.1.3	ScalarhwPowerSupplyStatus	read-only	mandatory	The status of the internal power supply.
1.3.6.1.4.1.1872.2.1.1.4	ScalarhwRedundantPSPresent	read-only	mandatory	Existence of redundant power supply.
1.3.6.1.4.1.1872.2.1.1.5	ScalarhwRedundantPSStatus	read-only	mandatory	The status of the redundant power supply.
1.3.6.1.4.1.1872.2.1.1.6	ScalarhwSensor1Temp	read-only	mandatory	The temperature in degrees Celcius of the sensor number 1.
1.3.6.1.4.1.1872.2.1.1.7	ScalarhwSensor2Temp	read-only	mandatory	The temperature in degrees Celcius of the sensor number 2.
1.3.6.1.4.1.1872.2.1.1.8	ScalarhwSensor3Temp	read-only	mandatory	The temperature in degrees Celcius of the sensor number 3.
1.3.6.1.4.1.1872.2.1.1.9	ScalarhwSensor4Temp	read-only	mandatory	The temperature in degrees Celcius of the sensor number 4.
1.3.6.1.4.1.1872.2.1.2	Nodeagent
1.3.6.1.4.1.1872.2.1.2.1	NodeagGeneral
1.3.6.1.4.1.1872.2.1.2.1.1	ScalaragSaveConfiguration	read-write	mandatory	This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to …
1.3.6.1.4.1.1872.2.1.2.1.2	ScalaragApplyConfiguration	read-write	mandatory	This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply …
1.3.6.1.4.1.1872.2.1.2.1.3	ScalaragApplyPending	read-only	mandatory	This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user t…
1.3.6.1.4.1.1872.2.1.2.1.4	ScalaragReset	read-write	mandatory	This is an action object to reboot the agent. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
1.3.6.1.4.1.1872.2.1.2.1.5	ScalaragConfigForNxtReset	read-write	mandatory	The configuration information to be loaded from at next reset. other(1)...unknown configuration (read-only) The following values are writable: active(2)...acti…
1.3.6.1.4.1.1872.2.1.2.1.6	ScalaragImageForNxtReset	read-write	mandatory	The software image to be booted from at next reset. other(1)...unknown image (read-only) The following values are writable: image1(2)...image 1 image2(3)...ima…
1.3.6.1.4.1.1872.2.1.2.1.7	ScalaragSoftwareVersion	read-only	mandatory	The version of the software image that is currently running on the system in the form of 'major.minor.bugfix'. A zero length string is returned if version is n…
1.3.6.1.4.1.1872.2.1.2.1.8	ScalaragBootVer	read-only	mandatory	The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
1.3.6.1.4.1.1872.2.1.2.1.9	ScalaragImage1Ver	read-only	mandatory	The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.1872.2.1.2.1.10	ScalaragImage2Ver	read-only	mandatory	The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.1872.2.1.2.1.11	ScalaragRtcDate	read-write	mandatory	The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
1.3.6.1.4.1.1872.2.1.2.1.12	ScalaragRtcTime	read-write	mandatory	The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if date is not available.
1.3.6.1.4.1.1872.2.1.2.1.13	ScalaragTftpServerIpAddr	read-write	mandatory	The TFTP server IP address.
1.3.6.1.4.1.1872.2.1.2.1.14	ScalaragTftpImageFileName	read-write	mandatory	The image file name to be downloaded.
1.3.6.1.4.1.1872.2.1.2.1.15	ScalaragTftpImage	read-write	mandatory	Whether the image file should be loaded in image1 or image2 in flash.
1.3.6.1.4.1.1872.2.1.2.1.16	ScalaragTftpDownload	read-write	mandatory	This is an action object to cause to download software image according to the setup of agTftpServerIpAddr, agTftpImageFileName, agTftpImage when download(2) is…
1.3.6.1.4.1.1872.2.1.2.1.17	ScalaragLastSetErrorReason	read-only	mandatory	The error reason of the last SET failure.
1.3.6.1.4.1.1872.2.1.2.1.18	ScalaragTftpServer	read-write	mandatory	The TFTP server IP address or domain name.
1.3.6.1.4.1.1872.2.1.2.1.19	ScalaragTftpCfgFileName	read-write	mandatory	The configuration file name.
1.3.6.1.4.1.1872.2.1.2.1.20	ScalaragTftpDumpFileName	read-write	mandatory	The file name for core dump.
1.3.6.1.4.1.1872.2.1.2.1.21	ScalaragTftpAction	read-write	mandatory	This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image f…
1.3.6.1.4.1.1872.2.1.2.1.22	ScalaragTftpLastActionStatus	read-only	mandatory	The recorded status of the previous TFTP activity.
1.3.6.1.4.1.1872.2.1.2.1.25	ScalaragEnabledSwFeatures	read-only	mandatory	The software features that are enabled on the switch.
1.3.6.1.4.1.1872.2.1.2.2	NodeagGeneralConfig
1.3.6.1.4.1.1872.2.1.2.2.1	ScalaragNewCfgSyslogHost	read-write	mandatory	The syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.2	ScalaragCurCfgSyslogHost	read-only	mandatory	The syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.3	ScalaragNewCfgBootp	read-write	mandatory	Enable or disable the use of BootP, in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.4	ScalaragCurCfgBootp	read-only	mandatory	Enable or disable the use of BootP, as currently configured in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.5	ScalaragNewCfgSpanningTree	read-write	mandatory	Turn On or Off Spanning Tree Protocol for the switch, in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.6	ScalaragCurCfgSpanningTree	read-only	mandatory	The state of Spanning Tree Protocol for the switch, as currently configured in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.7	ScalaragTrapHostTableMaxEnt	read-only	mandatory	The maximum number of rows in the trap host table.
1.3.6.1.4.1.1872.2.1.2.2.8	TableagCurCfgTrapHostTable	not-accessible	mandatory	The table of trap hosts which to send SNMP traps in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.8.1	RowagCurCfgTrapHostEntry	not-accessible	mandatory	A row in the trap host table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.8.1.1	ColumnagCurCfgTrapHostIndx	read-only	mandatory	The index of the row in trap host table.
1.3.6.1.4.1.1872.2.1.2.2.8.1.2	ColumnagCurCfgTrapHostIpAddr	read-only	mandatory	The IP address of a trap host.
1.3.6.1.4.1.1872.2.1.2.2.8.1.3	ColumnagCurCfgTrapHostCommString	read-only	mandatory	The SNMP community string to use with the trap host
1.3.6.1.4.1.1872.2.1.2.2.9	TableagNewCfgTrapHostTable	not-accessible	mandatory	The table of trap hosts which to send SNMP traps in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.9.1	RowagNewCfgTrapHostEntry	not-accessible	mandatory	A row in the trap host table in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.9.1.1	ColumnagNewCfgTrapHostIndx	read-only	mandatory	The index of the row in trap host table.
1.3.6.1.4.1.1872.2.1.2.2.9.1.2	ColumnagNewCfgTrapHostIpAddr	read-write	mandatory	The IP address of a trap host.
1.3.6.1.4.1.1872.2.1.2.2.9.1.3	ColumnagNewCfgTrapHostCommString	read-write	mandatory	The SNMP community string to use with the trap host
1.3.6.1.4.1.1872.2.1.2.2.10	ScalaragCurCfgHttpServerPort	read-only	mandatory	The TCP port number that the HTTP server is listening to in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.11	ScalaragNewCfgHttpServerPort	read-write	mandatory	The TCP port number that the HTTP server is listening to in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.12	ScalaragCurCfgLoginBanner	read-only	mandatory	The user defined login banner.
1.3.6.1.4.1.1872.2.1.2.2.13	ScalaragNewCfgLoginBanner	read-write	mandatory	The user defined login banner.
1.3.6.1.4.1.1872.2.1.2.2.14	ScalaragNewCfgSyslog2Host	read-write	mandatory	The second syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.15	ScalaragCurCfgSyslog2Host	read-only	mandatory	The second syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.16	ScalaragCurCfgSyslogFac	read-only	mandatory	The facility of syslog host in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.17	ScalaragNewCfgSyslogFac	read-write	mandatory	The facility of syslog host in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.18	ScalaragCurCfgSyslog2Fac	read-only	mandatory	The facility of syslog2 host in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.19	ScalaragNewCfgSyslog2Fac	read-write	mandatory	The facility of syslogs host in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.2.20	ScalaragCurCfgSmtpHost	read-only	mandatory	The user defined SMTP host.
1.3.6.1.4.1.1872.2.1.2.2.21	ScalaragNewCfgSmtpHost	read-write	mandatory	The user defined SMTP host.
1.3.6.1.4.1.1872.2.1.2.3	NodeagPortConfig
1.3.6.1.4.1.1872.2.1.2.3.1	ScalaragPortTableMaxEnt	read-only	mandatory	The maximum number of rows in the port configuration host table.
1.3.6.1.4.1.1872.2.1.2.3.2	TableagPortCurCfgTable	not-accessible	mandatory	The table of port configuration in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.3.2.1	RowagPortCurCfgTableEntry	not-accessible	mandatory	A row in the port configuration table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.2.3.2.1.1	ColumnagPortCurCfgIndx	read-only	mandatory	The index of the row in port configurations table.
1.3.6.1.4.1.1872.2.1.2.3.2.1.2	ColumnagPortCurCfgPrefLink	read-only	mandatory	This is the preferred link.
1.3.6.1.4.1.1872.2.1.2.3.2.1.3	ColumnagPortCurCfgBackLink	read-only	mandatory	This is the backup link.
1.3.6.1.4.1.1872.2.1.2.3.2.1.4	ColumnagPortCurCfgState	read-only	mandatory	This is the state of the port.
1.3.6.1.4.1.1872.2.1.2.3.2.1.5	ColumnagPortCurCfgVlanTag	read-only	mandatory	This is VLAN tag state of the port
1.3.6.1.4.1.1872.2.1.2.3.2.1.6	ColumnagPortCurCfgStp	read-only	mandatory	This object is used to turn Spanning Tree on or off for the port.
1.3.6.1.4.1.1872.2.1.2.3.2.1.7	ColumnagPortCurCfgRmon	read-only	mandatory	This object is used to turn RMON on or off on the port.
1.3.6.1.4.1.1872.2.1.2.3.2.1.8	ColumnagPortCurCfgPVID	read-only	mandatory	The default VLAN ID for the port.
1.3.6.1.4.1.1872.2.1.2.3.2.1.9	ColumnagPortCurCfgFastEthAutoNeg	read-only	mandatory	This object is used to turn the autonegotiation on or off for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.10	ColumnagPortCurCfgFastEthSpeed	read-only	mandatory	This object is used to select port speed for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.11	ColumnagPortCurCfgFastEthMode	read-only	mandatory	This object is used to select port mode for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.12	ColumnagPortCurCfgFastEthFctl	read-only	mandatory	This object is used to select port flow control for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.13	ColumnagPortCurCfgGigEthAutoNeg	read-only	mandatory	This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.14	ColumnagPortCurCfgGigEthFctl	read-only	mandatory	This object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.2.1.15	ColumnagPortCurCfgPortName	read-only	mandatory	The switch port name.
1.3.6.1.4.1.1872.2.1.2.3.2.1.16	ColumnagPortCurCfgBwmContract	read-only	mandatory	The switch port Bandwidth Management contract number.
1.3.6.1.4.1.1872.2.1.2.3.2.1.17	ColumnagPortCurCfgDiscardNonIPs	read-only	mandatory	Enable or disable to discard all non-IP traffic on the switch port.
1.3.6.1.4.1.1872.2.1.2.3.3	TableagPortNewCfgTable	not-accessible	mandatory	The table of port configuration in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.3.3.1	RowagPortNewCfgTableEntry	not-accessible	mandatory	A row in the port configuration table in the new_configuration block.
1.3.6.1.4.1.1872.2.1.2.3.3.1.1	ColumnagPortNewCfgIndx	read-only	mandatory	The index of the row in port configurations table.
1.3.6.1.4.1.1872.2.1.2.3.3.1.2	ColumnagPortNewCfgPrefLink	read-write	mandatory	This is the preferred link.
1.3.6.1.4.1.1872.2.1.2.3.3.1.3	ColumnagPortNewCfgBackLink	read-write	mandatory	This is the backup link.
1.3.6.1.4.1.1872.2.1.2.3.3.1.4	ColumnagPortNewCfgState	read-write	mandatory	This is the state of the port.
1.3.6.1.4.1.1872.2.1.2.3.3.1.5	ColumnagPortNewCfgVlanTag	read-write	mandatory	This is VLAN tag state of the port
1.3.6.1.4.1.1872.2.1.2.3.3.1.6	ColumnagPortNewCfgStp	read-write	mandatory	This object is used to turn Spanning Tree on or off for the port.
1.3.6.1.4.1.1872.2.1.2.3.3.1.7	ColumnagPortNewCfgRmon	read-write	mandatory	This object is used to turn RMON on or off on the port.
1.3.6.1.4.1.1872.2.1.2.3.3.1.8	ColumnagPortNewCfgPVID	read-write	mandatory	The default VLAN ID for the port.
1.3.6.1.4.1.1872.2.1.2.3.3.1.9	ColumnagPortNewCfgFastEthAutoNeg	read-write	mandatory	This object is used to turn the autonegotiation on or off for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.10	ColumnagPortNewCfgFastEthSpeed	read-write	mandatory	This object is used to select port speed for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.11	ColumnagPortNewCfgFastEthMode	read-write	mandatory	This object is used to select port mode for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.12	ColumnagPortNewCfgFastEthFctl	read-write	mandatory	This object is used to select port flow control for fast Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.13	ColumnagPortNewCfgGigEthAutoNeg	read-write	mandatory	This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.14	ColumnagPortNewCfgGigEthFctl	read-write	mandatory	This object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.1872.2.1.2.3.3.1.15	ColumnagPortNewCfgPortName	read-write	mandatory	The switch port name.
1.3.6.1.4.1.1872.2.1.2.3.3.1.16	ColumnagPortNewCfgBwmContract	read-write	mandatory	The switch port Bandwidth Management contract number.
1.3.6.1.4.1.1872.2.1.2.3.3.1.17	ColumnagPortNewCfgDiscardNonIPs	read-write	mandatory	Enable or disable to discard all non-IP traffic on the switch port.
1.3.6.1.4.1.1872.2.1.3	Nodeiprouting
1.3.6.1.4.1.1872.2.1.3.1	ScalaripInterfaceTableMax	read-only	mandatory	The maximum number of rows in the Ip interface table.
1.3.6.1.4.1.1872.2.1.3.2	TableipCurCfgIntfTable	not-accessible	mandatory	The table of IP interface configuration.
1.3.6.1.4.1.1872.2.1.3.2.1	RowipCurCfgIntfEntry	not-accessible	mandatory	A row in the Ip interface table
1.3.6.1.4.1.1872.2.1.3.2.1.1	ColumnipCurCfgIntfIndex	read-only	mandatory	The interface number for which the IP information is related.
1.3.6.1.4.1.1872.2.1.3.2.1.2	ColumnipCurCfgIntfAddr	read-only	mandatory	The IP address of the interface.
1.3.6.1.4.1.1872.2.1.3.2.1.3	ColumnipCurCfgIntfMask	read-only	mandatory	The subnet mask of the interface.
1.3.6.1.4.1.1872.2.1.3.2.1.4	ColumnipCurCfgIntfBroadcast	read-only	mandatory	The broadcast address of the interface.
1.3.6.1.4.1.1872.2.1.3.2.1.5	ColumnipCurCfgIntfVlan	read-only	mandatory	The VLAN associated with the interface.
1.3.6.1.4.1.1872.2.1.3.2.1.6	ColumnipCurCfgIntfState	read-only	mandatory	The state of the interface.
1.3.6.1.4.1.1872.2.1.3.3	TableipNewCfgIntfTable	not-accessible	mandatory	The table of interface configuration in the New Configuration Block.
1.3.6.1.4.1.1872.2.1.3.3.1	RowipNewCfgIntfEntry	not-accessible	mandatory	A row in the Ip interface table
1.3.6.1.4.1.1872.2.1.3.3.1.1	ColumnipNewCfgIntfIndex	read-only	mandatory	The interface number for which the IP information is related.
1.3.6.1.4.1.1872.2.1.3.3.1.2	ColumnipNewCfgIntfAddr	read-write	mandatory	The IP address of the interface.
1.3.6.1.4.1.1872.2.1.3.3.1.3	ColumnipNewCfgIntfMask	read-write	mandatory	The subnet mask of the interface.
1.3.6.1.4.1.1872.2.1.3.3.1.4	ColumnipNewCfgIntfBroadcast	read-write	mandatory	The broadcast address of the interface.
1.3.6.1.4.1.1872.2.1.3.3.1.5	ColumnipNewCfgIntfVlan	read-write	mandatory	The VLAN associated with the interface.
1.3.6.1.4.1.1872.2.1.3.3.1.6	ColumnipNewCfgIntfState	read-write	mandatory	The state of the interface.
1.3.6.1.4.1.1872.2.1.3.3.1.7	ColumnipNewCfgIntfDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.1.3.4	ScalaripGatewayTableMax	read-only	mandatory	The maximum number of rows in the IP gateway table.
1.3.6.1.4.1.1872.2.1.3.5	TableipCurCfgGwTable	not-accessible	mandatory	The table of gateway configuration in the Current configuration Block.
1.3.6.1.4.1.1872.2.1.3.5.1	RowipCurCfgGwEntry	not-accessible	mandatory	A row in the Ip gateway table
1.3.6.1.4.1.1872.2.1.3.5.1.1	ColumnipCurCfgGwIndex	read-only	mandatory	The gateway number for which the information is related.
1.3.6.1.4.1.1872.2.1.3.5.1.2	ColumnipCurCfgGwAddr	read-only	mandatory	The IP address of the default gateway.
1.3.6.1.4.1.1872.2.1.3.5.1.3	ColumnipCurCfgGwInterval	read-only	mandatory	The interval between ping attempts.
1.3.6.1.4.1.1872.2.1.3.5.1.4	ColumnipCurCfgGwRetry	read-only	mandatory	The number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.1872.2.1.3.5.1.5	ColumnipCurCfgGwState	read-only	mandatory	The state of the default gateway.
1.3.6.1.4.1.1872.2.1.3.5.1.6	ColumnipCurCfgGwArp	read-only	mandatory	The state of ARP only health checks.
1.3.6.1.4.1.1872.2.1.3.6	TableipNewCfgGwTable	not-accessible	mandatory	The table of default gateway configuration in the New Configuration Block.
1.3.6.1.4.1.1872.2.1.3.6.1	RowipNewCfgGwEntry	not-accessible	mandatory	A row in the Ip default gateway table
1.3.6.1.4.1.1872.2.1.3.6.1.1	ColumnipNewCfgGwIndex	read-only	mandatory	The gateway number for which the information is related.
1.3.6.1.4.1.1872.2.1.3.6.1.2	ColumnipNewCfgGwAddr	read-write	mandatory	The IP address of the default gateway.
1.3.6.1.4.1.1872.2.1.3.6.1.3	ColumnipNewCfgGwInterval	read-write	mandatory	The interval in seconds between ping attempts.
1.3.6.1.4.1.1872.2.1.3.6.1.4	ColumnipNewCfgGwRetry	read-write	mandatory	The number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.1872.2.1.3.6.1.5	ColumnipNewCfgGwState	read-write	mandatory	The state of the default gateway.
1.3.6.1.4.1.1872.2.1.3.6.1.6	ColumnipNewCfgGwDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.1.3.6.1.7	ColumnipNewCfgGwArp	read-write	mandatory	The state of the ARP only health checks.
1.3.6.1.4.1.1872.2.1.3.7	TableipCurCfgStaticRouteTable	not-accessible	mandatory	The table of static routes in the current configuration block.
1.3.6.1.4.1.1872.2.1.3.7.1	RowipCurCfgStaticRouteEntry	not-accessible	mandatory	A row in the static IP route table
1.3.6.1.4.1.1872.2.1.3.7.1.1	ColumnipCurCfgStaticRouteIndx	read-only	mandatory	The index of the static routing table.
1.3.6.1.4.1.1872.2.1.3.7.1.2	ColumnipCurCfgStaticRouteDestIp	read-only	mandatory	The destination IP address of this route.
1.3.6.1.4.1.1872.2.1.3.7.1.3	ColumnipCurCfgStaticRouteMask	read-only	mandatory	The destination IP address of this route.
1.3.6.1.4.1.1872.2.1.3.7.1.4	ColumnipCurCfgStaticRouteGateway	read-only	mandatory	The destination IP address of this route.
1.3.6.1.4.1.1872.2.1.3.7.1.5	ColumnipCurCfgStaticRouteInterface	read-only	mandatory	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.1.3.8	TableipNewCfgStaticRouteTable	not-accessible	mandatory	The table of static routes in the new configuration block.
1.3.6.1.4.1.1872.2.1.3.8.1	RowipNewCfgStaticRouteEntry	not-accessible	mandatory	A row in the static IP route table
1.3.6.1.4.1.1872.2.1.3.8.1.1	ColumnipNewCfgStaticRouteIndx	read-only	mandatory	The index of the static routing table.
1.3.6.1.4.1.1872.2.1.3.8.1.2	ColumnipNewCfgStaticRouteDestIp	read-write	mandatory	The destination IP address of this route.
1.3.6.1.4.1.1872.2.1.3.8.1.3	ColumnipNewCfgStaticRouteMask	read-write	mandatory	The subnet mask of this route.
1.3.6.1.4.1.1872.2.1.3.8.1.4	ColumnipNewCfgStaticRouteGateway	read-write	mandatory	The IP address of the gateway for this route.
1.3.6.1.4.1.1872.2.1.3.8.1.5	ColumnipNewCfgStaticRouteAction	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.1872.2.1.3.8.1.6	ColumnipNewCfgStaticRouteInterface	read-write	mandatory	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.1872.2.1.3.9	NodeipForward
1.3.6.1.4.1.1872.2.1.3.9.1	NoderipConfig
1.3.6.1.4.1.1872.2.1.3.9.1.1	ScalarripCurCfgSupply	read-only	mandatory	Enable or disable supplying route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.2	ScalarripNewCfgSupply	read-write	mandatory	Enable or disable supplying route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.3	ScalarripCurCfgListen	read-only	mandatory	Enable or disable listening to route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.4	ScalarripNewCfgListen	read-write	mandatory	Enable or disable listening to route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.5	ScalarripCurCfgDefListen	read-only	mandatory	Enable or disable listening to default routes.
1.3.6.1.4.1.1872.2.1.3.9.1.6	ScalarripNewCfgDefListen	read-write	mandatory	Enable or disable listening to default routes.
1.3.6.1.4.1.1872.2.1.3.9.1.7	ScalarripCurCfgStaticSupply	read-only	mandatory	Enable or disable supplying static route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.8	ScalarripNewCfgStaticSupply	read-write	mandatory	Enable or disable supplying static route updates.
1.3.6.1.4.1.1872.2.1.3.9.1.9	ScalarripCurCfgUpdatePeriod	read-only	mandatory	Update Period in seconds.
1.3.6.1.4.1.1872.2.1.3.9.1.10	ScalarripNewCfgUpdatePeriod	read-write	mandatory	Update period in seconds.
1.3.6.1.4.1.1872.2.1.3.9.1.11	ScalarripCurCfgState	read-only	mandatory	RIP global state.
1.3.6.1.4.1.1872.2.1.3.9.1.12	ScalarripNewCfgState	read-write	mandatory	Globally turn RIP on or off.
1.3.6.1.4.1.1872.2.1.3.9.1.13	ScalarripCurCfgPoisonReverse	read-only	mandatory	RIP poison reverse.
1.3.6.1.4.1.1872.2.1.3.9.1.14	ScalarripNewCfgPoisonReverse	read-write	mandatory	RIP poison reverse.
1.3.6.1.4.1.1872.2.1.3.9.2	TableipFwdCurCfgPortTable	not-accessible	mandatory	The table of ports and their forwarding states
1.3.6.1.4.1.1872.2.1.3.9.2.1	RowipFwdCurCfgPortEntry	not-accessible	mandatory	A row in the ipFwdCurCfgPortTable
1.3.6.1.4.1.1872.2.1.3.9.2.1.1	ColumnipFwdCurCfgPortIndex	read-only	mandatory	The port number for which the forwarding state information pertains.
1.3.6.1.4.1.1872.2.1.3.9.2.1.2	ColumnipFwdCurCfgPortState	read-only	mandatory	The forwarding state of the port.
1.3.6.1.4.1.1872.2.1.3.9.3	TableipFwdNewCfgPortTable	not-accessible	mandatory	The table of ports and their forwarding states
1.3.6.1.4.1.1872.2.1.3.9.3.1	RowipFwdNewCfgPortEntry	not-accessible	mandatory	A row in the ipFwdNewCfgPortTable
1.3.6.1.4.1.1872.2.1.3.9.3.1.1	ColumnipFwdNewCfgPortIndex	read-only	mandatory	The port number for which the forwarding state information pertains.
1.3.6.1.4.1.1872.2.1.3.9.3.1.2	ColumnipFwdNewCfgPortState	read-write	mandatory	The forwarding state of the port.
1.3.6.1.4.1.1872.2.1.3.9.4	ScalaripFwdCurCfgLocalSubnet	read-only	mandatory	The current local IP subnet.
1.3.6.1.4.1.1872.2.1.3.9.5	ScalaripFwdNewCfgLocalSubnet	read-write	mandatory	The new local IP subnet.
1.3.6.1.4.1.1872.2.1.3.9.6	ScalaripFwdCurCfgLocalMask	read-only	mandatory	The current local IP subnet mask.
1.3.6.1.4.1.1872.2.1.3.9.7	ScalaripFwdNewCfgLocalMask	read-write	mandatory	The new local IP subnet mask.
1.3.6.1.4.1.1872.2.1.3.9.8	ScalaripFwdCurCfgState	read-only	mandatory	IP forwarding global state.
1.3.6.1.4.1.1872.2.1.3.9.9	ScalaripFwdNewCfgState	read-write	mandatory	IP forwarding global state.
1.3.6.1.4.1.1872.2.1.3.9.10	ScalaripFwdCurCfgDirectedBcast	read-only	mandatory	Enable or disable forwarding directed broadcasts.
1.3.6.1.4.1.1872.2.1.3.9.11	ScalaripFwdNewCfgDirectedBcast	read-write	mandatory	Enable or disable forwarding directed broadcasts.
1.3.6.1.4.1.1872.2.1.3.10	ScalararpCurCfgReARPPeriod	read-only	mandatory	Re-ARP Period in seconds.
1.3.6.1.4.1.1872.2.1.3.11	ScalararpNewCfgReARPPeriod	read-write	mandatory	Re-ARP Period in seconds.
1.3.6.1.4.1.1872.2.1.3.12	ScalaripCurCfgGwMetric	read-only	mandatory	The default gateway metric.
1.3.6.1.4.1.1872.2.1.3.13	ScalaripNewCfgGwMetric	read-write	mandatory	The default gateway metric.
1.3.6.1.4.1.1872.2.1.4	Nodevlans
1.3.6.1.4.1.1872.2.1.4.1	ScalarvlanMaxEnt	read-only	mandatory	The maximum number of rows in the VLAN configuration table.
1.3.6.1.4.1.1872.2.1.4.2	TablevlanCurCfgTable	not-accessible	mandatory	The table of VLAN configuration.
1.3.6.1.4.1.1872.2.1.4.2.1	RowvlanCurCfgTableEntry	not-accessible	mandatory	A row in the VLAN configuration table.
1.3.6.1.4.1.1872.2.1.4.2.1.1	ColumnvlanCurCfgVlanId	read-only	mandatory	The VLAN identifier.
1.3.6.1.4.1.1872.2.1.4.2.1.2	ColumnvlanCurCfgVlanName	read-only	mandatory	The VLAN name.
1.3.6.1.4.1.1872.2.1.4.2.1.3	ColumnvlanCurCfgPorts	read-only	mandatory	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\|…
1.3.6.1.4.1.1872.2.1.4.2.1.4	ColumnvlanCurCfgState	read-only	mandatory	Enable or disable a VLAN
1.3.6.1.4.1.1872.2.1.4.2.1.5	ColumnvlanCurCfgJumbo	read-only	mandatory	Enable or Disable the Jumbo frame support for the VLAN
1.3.6.1.4.1.1872.2.1.4.2.1.6	ColumnvlanCurCfgBwmContract	read-only	mandatory	Default contract number the VLAN
1.3.6.1.4.1.1872.2.1.4.3	TablevlanNewCfgTable	not-accessible	mandatory	The table of VLAN configuration.
1.3.6.1.4.1.1872.2.1.4.3.1	RowvlanNewCfgTableEntry	not-accessible	mandatory	A row in the VLAN configuration table.
1.3.6.1.4.1.1872.2.1.4.3.1.1	ColumnvlanNewCfgVlanId	read-only	mandatory	The VLAN identifier.
1.3.6.1.4.1.1872.2.1.4.3.1.2	ColumnvlanNewCfgVlanName	read-write	mandatory	The VLAN name.
1.3.6.1.4.1.1872.2.1.4.3.1.3	ColumnvlanNewCfgPorts	read-only	mandatory	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\|…
1.3.6.1.4.1.1872.2.1.4.3.1.4	ColumnvlanNewCfgState	read-write	mandatory	Enable or disable a VLAN
1.3.6.1.4.1.1872.2.1.4.3.1.5	ColumnvlanNewCfgJumbo	read-write	mandatory	Enable or Disable the Jumbo frame support for the VLAN
1.3.6.1.4.1.1872.2.1.4.3.1.6	ColumnvlanNewCfgAddPort	read-write	mandatory	The port to be added to the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.1.4.3.1.7	ColumnvlanNewCfgRemovePort	read-write	mandatory	The port to be removed from the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.1.4.3.1.8	ColumnvlanNewCfgDelete	read-write	mandatory	This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
1.3.6.1.4.1.1872.2.1.4.3.1.9	ColumnvlanNewCfgBwmContract	read-write	mandatory	Default contract number for the VLAN.
1.3.6.1.4.1.1872.2.1.5	Nodeserverloadbalance
1.3.6.1.4.1.1872.2.1.5.1	ScalarslbRealServerMaxSize	read-only	mandatory	The maximum number of entries in SLB RealServerTable.
1.3.6.1.4.1.1872.2.1.5.2	TableslbCurCfgRealServerTable	not-accessible	mandatory	The table of Real Server configuration in the current_config.
1.3.6.1.4.1.1872.2.1.5.2.1	RowslbCurCfgRealServerEntry	not-accessible	mandatory	Information about a particular Real Server configuration.
1.3.6.1.4.1.1872.2.1.5.2.1.1	ColumnslbCurCfgRealServerIndex	read-only	mandatory	The real server number
1.3.6.1.4.1.1872.2.1.5.2.1.2	ColumnslbCurCfgRealServerIpAddr	read-only	mandatory	IP address of the real server identified by the instance of slbRealServerIndex.
1.3.6.1.4.1.1872.2.1.5.2.1.3	ColumnslbCurCfgRealServerWeight	read-only	mandatory	The server weight.
1.3.6.1.4.1.1872.2.1.5.2.1.4	ColumnslbCurCfgRealServerMaxConns	read-only	mandatory	The maximum number of connections that are allowed.
1.3.6.1.4.1.1872.2.1.5.2.1.5	ColumnslbCurCfgRealServerTimeOut	read-only	mandatory	The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.1.5.2.1.6	ColumnslbCurCfgRealServerBackUp	read-only	mandatory	The backup server number for this server.
1.3.6.1.4.1.1872.2.1.5.2.1.7	ColumnslbCurCfgRealServerPingInterval	read-only	mandatory	The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
1.3.6.1.4.1.1872.2.1.5.2.1.8	ColumnslbCurCfgRealServerFailRetry	read-only	mandatory	The number of failed attempts to declare this server DOWN.
1.3.6.1.4.1.1872.2.1.5.2.1.9	ColumnslbCurCfgRealServerSuccRetry	read-only	mandatory	The number of successful attempts to declare a server UP.
1.3.6.1.4.1.1872.2.1.5.2.1.10	ColumnslbCurCfgRealServerState	read-only	mandatory	Enable or disable this server.
1.3.6.1.4.1.1872.2.1.5.2.1.11	ColumnslbCurCfgRealServerType	read-only	mandatory	The server type. It participates in global server load balancing when it is configured as remote-server.
1.3.6.1.4.1.1872.2.1.5.2.1.12	ColumnslbCurCfgRealServerName	read-only	mandatory	The name of the real server.
1.3.6.1.4.1.1872.2.1.5.2.1.13	ColumnslbCurCfgRealServerUrlBmap	read-only	mandatory	The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OC…
1.3.6.1.4.1.1872.2.1.5.2.1.14	ColumnslbCurCfgRealServerCookie	read-only	mandatory	The real server that will handle client requests that don't contain an URL cookie if Cookie loadbalance is enabled.
1.3.6.1.4.1.1872.2.1.5.2.1.15	ColumnslbCurCfgRealServerExcludeStr	read-only	mandatory	The real server will handle requests that don't match the loadbalance string if it is enabled.
1.3.6.1.4.1.1872.2.1.5.2.1.16	ColumnslbCurCfgRealServerSubmac	read-only	mandatory	The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server fr…
1.3.6.1.4.1.1872.2.1.5.3	TableslbNewCfgRealServerTable	not-accessible	mandatory	The table of Real Server configuration in the new_config.
1.3.6.1.4.1.1872.2.1.5.3.1	RowslbNewCfgRealServerEntry	not-accessible	mandatory	Information about a particular Real Server configuration.
1.3.6.1.4.1.1872.2.1.5.3.1.1	ColumnslbNewCfgRealServerIndex	read-only	mandatory	The real server number
1.3.6.1.4.1.1872.2.1.5.3.1.2	ColumnslbNewCfgRealServerIpAddr	read-write	mandatory	IP address of the real server identified by the instance of slbRealServerIndex.
1.3.6.1.4.1.1872.2.1.5.3.1.3	ColumnslbNewCfgRealServerWeight	read-write	mandatory	The server weight.
1.3.6.1.4.1.1872.2.1.5.3.1.4	ColumnslbNewCfgRealServerMaxConns	read-write	mandatory	The maximum number of connections that are allowed.
1.3.6.1.4.1.1872.2.1.5.3.1.5	ColumnslbNewCfgRealServerTimeOut	read-write	mandatory	The maximum number of minutes an inactive connection remains open.
1.3.6.1.4.1.1872.2.1.5.3.1.6	ColumnslbNewCfgRealServerBackUp	read-write	mandatory	The backup server number for this server.
1.3.6.1.4.1.1872.2.1.5.3.1.7	ColumnslbNewCfgRealServerPingInterval	read-write	mandatory	The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
1.3.6.1.4.1.1872.2.1.5.3.1.8	ColumnslbNewCfgRealServerFailRetry	read-write	mandatory	The number of failed attempts to declare this server DOWN.
1.3.6.1.4.1.1872.2.1.5.3.1.9	ColumnslbNewCfgRealServerSuccRetry	read-write	mandatory	The number of successful attempts to declare a server UP.
1.3.6.1.4.1.1872.2.1.5.3.1.10	ColumnslbNewCfgRealServerState	read-write	mandatory	Enable or disable this server.
1.3.6.1.4.1.1872.2.1.5.3.1.11	ColumnslbNewCfgRealServerDelete	read-write	mandatory	By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.1.5.3.1.12	ColumnslbNewCfgRealServerType	read-write	mandatory	The server type. It participates in global server load balancing when it is configured as remote-server.
1.3.6.1.4.1.1872.2.1.5.3.1.13	ColumnslbNewCfgRealServerName	read-write	mandatory	The name of the real server.
1.3.6.1.4.1.1872.2.1.5.3.1.14	ColumnslbNewCfgRealServerUrlBmap	read-only	mandatory	The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OC…
1.3.6.1.4.1.1872.2.1.5.3.1.15	ColumnslbNewCfgRealServerAddUrl	read-write	mandatory	The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
1.3.6.1.4.1.1872.2.1.5.3.1.16	ColumnslbNewCfgRealServerRemUrl	read-write	mandatory	The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
1.3.6.1.4.1.1872.2.1.5.3.1.17	ColumnslbNewCfgRealServerCookie	read-write	mandatory	Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled.
1.3.6.1.4.1.1872.2.1.5.3.1.18	ColumnslbNewCfgRealServerExcludeStr	read-write	mandatory	Enable or disable exclusionary matching string on real server.
1.3.6.1.4.1.1872.2.1.5.3.1.19	ColumnslbNewCfgRealServerSubmac	read-write	mandatory	The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server fr…
1.3.6.1.4.1.1872.2.1.5.4	ScalarslbVirtServerTableMaxSize	read-only	mandatory	The maximum number of entries in SLB VirtServerTable.
1.3.6.1.4.1.1872.2.1.5.5	TableslbCurCfgVirtServerTable	not-accessible	mandatory	The table of virtual Servers.
1.3.6.1.4.1.1872.2.1.5.5.1	RowslbCurCfgVirtualServerEntry	not-accessible	mandatory	A row in the virtual server table.
1.3.6.1.4.1.1872.2.1.5.5.1.1	ColumnslbCurCfgVirtServerIndex	read-only	mandatory	Virtual Server Number
1.3.6.1.4.1.1872.2.1.5.5.1.2	ColumnslbCurCfgVirtServerIpAddress	read-only	mandatory	IP address of the virtual server.
1.3.6.1.4.1.1872.2.1.5.5.1.3	ColumnslbCurCfgVirtServerLayer3Only	read-only	mandatory	Enable or disable layer3 only balancing.
1.3.6.1.4.1.1872.2.1.5.5.1.4	ColumnslbCurCfgVirtServerState	read-only	mandatory	Enable or disable the virtual server.
1.3.6.1.4.1.1872.2.1.5.5.1.5	ColumnslbCurCfgVirtServerDname	read-only	mandatory	The domain name of the virtual server.
1.3.6.1.4.1.1872.2.1.5.5.1.6	ColumnslbCurCfgVirtServerCname	read-only	mandatory	The cookie name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.1.5.5.1.7	ColumnslbCurCfgVirtServerCoffset	read-only	mandatory	The starting byte offset of the cookie value.
1.3.6.1.4.1.1872.2.1.5.5.1.8	ColumnslbCurCfgVirtServerClength	read-only	mandatory	The number of bytes to extract from the cookie value.
1.3.6.1.4.1.1872.2.1.5.5.1.9	ColumnslbCurCfgVirtServerUriCookie	read-only	mandatory	Enable or disable cookie search in URI
1.3.6.1.4.1.1872.2.1.5.5.1.10	ColumnslbCurCfgVirtServerFtpParsing	read-only	mandatory	Enable or Disable the ftp parsing for the virtual server.
1.3.6.1.4.1.1872.2.1.5.5.1.11	ColumnslbCurCfgVirtServerUrlHashLen	read-only	mandatory	The number of bytes used to hash onto server, A zero means URL hashing disabled.
1.3.6.1.4.1.1872.2.1.5.5.1.12	ColumnslbCurCfgVirtServerHttpHdrName	read-only	mandatory	The HTTP header name of the virtual server.
1.3.6.1.4.1.1872.2.1.5.5.1.13	ColumnslbCurCfgVirtServerBwmContract	read-only	mandatory	The default BW contract of virtual server.
1.3.6.1.4.1.1872.2.1.5.6	TableslbNewCfgVirtServerTable	not-accessible	mandatory	The table of virtual Servers.
1.3.6.1.4.1.1872.2.1.5.6.1	RowslbNewCfgVirtualServerEntry	not-accessible	mandatory	A row in the virtual server table.
1.3.6.1.4.1.1872.2.1.5.6.1.1	ColumnslbNewCfgVirtServerIndex	read-only	mandatory	Virtual Server Number
1.3.6.1.4.1.1872.2.1.5.6.1.2	ColumnslbNewCfgVirtServerIpAddress	read-write	mandatory	IP address of the virtual server.
1.3.6.1.4.1.1872.2.1.5.6.1.3	ColumnslbNewCfgVirtServerLayer3Only	read-write	mandatory	Enable or disable layer3 only balancing.
1.3.6.1.4.1.1872.2.1.5.6.1.4	ColumnslbNewCfgVirtServerState	read-write	mandatory	Enable or disable the virtual server.
1.3.6.1.4.1.1872.2.1.5.6.1.5	ColumnslbNewCfgVirtServerDelete	read-write	mandatory	By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.1.5.6.1.6	ColumnslbNewCfgVirtServerDname	read-write	mandatory	The domain name of the virtual server.
1.3.6.1.4.1.1872.2.1.5.6.1.7	ColumnslbNewCfgVirtServerCname	read-write	mandatory	The cookie name of the virtual server used for cookie load balance.
1.3.6.1.4.1.1872.2.1.5.6.1.8	ColumnslbNewCfgVirtServerCoffset	read-write	mandatory	The starting byte offset of the cookie value.
1.3.6.1.4.1.1872.2.1.5.6.1.9	ColumnslbNewCfgVirtServerClength	read-write	mandatory	The number of bytes to extract from the cookie value.
1.3.6.1.4.1.1872.2.1.5.6.1.10	ColumnslbNewCfgVirtServerUriCookie	read-write	mandatory	Enable or disable cookie search in URI
1.3.6.1.4.1.1872.2.1.5.6.1.11	ColumnslbNewCfgVirtServerFtpParsing	read-write	mandatory	Enable or Disable the ftp parsing for the virtual server.
1.3.6.1.4.1.1872.2.1.5.6.1.12	ColumnslbNewCfgVirtServerUrlHashLen	read-write	mandatory	The number of bytes used to hash onto server, A zero means URL hashing disabled.
1.3.6.1.4.1.1872.2.1.5.6.1.13	ColumnslbNewCfgVirtServerHttpHdrName	read-write	mandatory	The HTTP header name of the virtual server.
1.3.6.1.4.1.1872.2.1.5.6.1.14	ColumnslbNewCfgVirtServerBwmContract	read-write	mandatory	The default BW contract number of the virtual server.
1.3.6.1.4.1.1872.2.1.5.7	TableslbCurCfgVirtServicesTable	not-accessible	mandatory	The table of virtual Services.
1.3.6.1.4.1.1872.2.1.5.7.1	RowslbCurCfgVirtServicesEntry	not-accessible	mandatory	A row in the virtual services table.
1.3.6.1.4.1.1872.2.1.5.7.1.1	ColumnslbCurCfgVirtServIndex	read-only	mandatory	The number of the virtual server.
1.3.6.1.4.1.1872.2.1.5.7.1.2	ColumnslbCurCfgVirtServiceIndex	read-only	mandatory	The service index. This has no external meaning
1.3.6.1.4.1.1872.2.1.5.7.1.3	ColumnslbCurCfgVirtServiceVirtPort	read-only	mandatory	The layer4 virtual port number of the service.
1.3.6.1.4.1.1872.2.1.5.7.1.4	ColumnslbCurCfgVirtServiceRealGroup	read-only	mandatory	The real server group number for this service.
1.3.6.1.4.1.1872.2.1.5.7.1.5	ColumnslbCurCfgVirtServiceRealPort	read-only	mandatory	The layer4 real port number of the service.
1.3.6.1.4.1.1872.2.1.5.7.1.6	ColumnslbCurCfgVirtServiceUDPBalance	read-only	mandatory	Enable, disable or stateless the UDP balancing for the virtual port.
1.3.6.1.4.1.1872.2.1.5.7.1.7	ColumnslbCurCfgVirtServicePBind	read-only	mandatory	Enable or disable persistent bindings for the virtual port.
1.3.6.1.4.1.1872.2.1.5.7.1.8	ColumnslbCurCfgVirtServiceHname	read-only	mandatory	The host name of the virtual service.
1.3.6.1.4.1.1872.2.1.5.7.1.9	ColumnslbCurCfgVirtServiceHttpSlb	read-only	mandatory	Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.1.5.7.1.10	ColumnslbCurCfgVirtServiceBwmContract	read-only	mandatory	The BWM contract number for this service.
1.3.6.1.4.1.1872.2.1.5.7.1.11	ColumnslbCurCfgVirtServiceDirServerRtn	read-only	mandatory	Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return …
1.3.6.1.4.1.1872.2.1.5.8	TableslbNewCfgVirtServicesTable	not-accessible	mandatory	The table of virtual Services.
1.3.6.1.4.1.1872.2.1.5.8.1	RowslbNewCfgVirtServicesEntry	not-accessible	mandatory	A row in the virtual services table.
1.3.6.1.4.1.1872.2.1.5.8.1.1	ColumnslbNewCfgVirtServIndex	read-only	mandatory	The number of the virtual server.
1.3.6.1.4.1.1872.2.1.5.8.1.2	ColumnslbNewCfgVirtServiceIndex	read-only	mandatory	The service index. This has no external meaning
1.3.6.1.4.1.1872.2.1.5.8.1.3	ColumnslbNewCfgVirtServiceVirtPort	read-write	mandatory	The layer4 virtual port number of the service.
1.3.6.1.4.1.1872.2.1.5.8.1.4	ColumnslbNewCfgVirtServiceRealGroup	read-write	mandatory	The real server group number for this service.
1.3.6.1.4.1.1872.2.1.5.8.1.5	ColumnslbNewCfgVirtServiceRealPort	read-write	mandatory	The layer4 real port number of the service.
1.3.6.1.4.1.1872.2.1.5.8.1.6	ColumnslbNewCfgVirtServiceUDPBalance	read-write	mandatory	Enable, disable or stateless the UDP balancing for the virtual port.
1.3.6.1.4.1.1872.2.1.5.8.1.7	ColumnslbNewCfgVirtServicePBind	read-write	mandatory	Enable or disable persistent bindings for the virtual port.
1.3.6.1.4.1.1872.2.1.5.8.1.8	ColumnslbNewCfgVirtServiceHname	read-write	mandatory	The host name of the virtual service.
1.3.6.1.4.1.1872.2.1.5.8.1.9	ColumnslbNewCfgVirtServiceHttpSlb	read-write	mandatory	Select HTTP server loadbalancing for the virtual port.
1.3.6.1.4.1.1872.2.1.5.8.1.10	ColumnslbNewCfgVirtServiceBwmContract	read-write	mandatory	The BWM contract number for this service.
1.3.6.1.4.1.1872.2.1.5.8.1.11	ColumnslbNewCfgVirtServiceDirServerRtn	read-write	mandatory	Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return …
1.3.6.1.4.1.1872.2.1.5.8.1.12	ColumnslbNewCfgVirtServiceDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.1.5.9	ScalarslbGroupTableMaxSize	read-only	mandatory	The maximum number of entries in slbCurCfgGroupTable.
1.3.6.1.4.1.1872.2.1.5.10	TableslbCurCfgGroupTable	not-accessible	mandatory	The table of groups
1.3.6.1.4.1.1872.2.1.5.10.1	RowslbCurCfgGroupEntry	not-accessible	mandatory	A row in the slbCurCfgGroupTable
1.3.6.1.4.1.1872.2.1.5.10.1.1	ColumnslbCurCfgGroupIndex	read-only	mandatory	The group number for which the information pertains.
1.3.6.1.4.1.1872.2.1.5.10.1.2	ColumnslbCurCfgGroupRealServers	read-only	mandatory	The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\| \|_ server 9 \|…
1.3.6.1.4.1.1872.2.1.5.10.1.3	ColumnslbCurCfgGroupMetric	read-only	mandatory	The metric used to select next server in group.
1.3.6.1.4.1.1872.2.1.5.10.1.4	ColumnslbCurCfgGroupBackupServer	read-only	mandatory	The backup real server for this group.
1.3.6.1.4.1.1872.2.1.5.10.1.5	ColumnslbCurCfgGroupHealthCheckUrl	read-only	mandatory	The URL used to verify HTTP content availability for the real servers of this group.
1.3.6.1.4.1.1872.2.1.5.10.1.6	ColumnslbCurCfgGroupHealthCheckLayer	read-only	mandatory	The OSI layer at which servers are health checked.
1.3.6.1.4.1.1872.2.1.5.10.1.7	ColumnslbCurCfgGroupName	read-only	mandatory	The name of the real server group.
1.3.6.1.4.1.1872.2.1.5.10.1.8	ColumnslbCurCfgGroupRealThreshold	read-only	mandatory	The server failure syslog threshold of the real server group.
1.3.6.1.4.1.1872.2.1.5.10.1.9	ColumnslbCurCfgGroupBackupGroup	read-only	mandatory	The backup real server group for this group.
1.3.6.1.4.1.1872.2.1.5.11	TableslbNewCfgGroupTable	not-accessible	mandatory	The table of groups
1.3.6.1.4.1.1872.2.1.5.11.1	RowslbNewCfgGroupEntry	not-accessible	mandatory	A row in the slbNewCfgGroupTable
1.3.6.1.4.1.1872.2.1.5.11.1.1	ColumnslbNewCfgGroupIndex	read-only	mandatory	The group number for which the information pertains.
1.3.6.1.4.1.1872.2.1.5.11.1.2	ColumnslbNewCfgGroupRealServers	read-only	mandatory	The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \| \|\| \|_ server 9 \|…
1.3.6.1.4.1.1872.2.1.5.11.1.3	ColumnslbNewCfgGroupAddServer	read-write	mandatory	The real server to be added to the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.1.5.11.1.4	ColumnslbNewCfgGroupRemoveServer	read-write	mandatory	The real server to be removed from the group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.1.5.11.1.5	ColumnslbNewCfgGroupMetric	read-write	mandatory	The metric used to select next server in group.
1.3.6.1.4.1.1872.2.1.5.11.1.6	ColumnslbNewCfgGroupBackupServer	read-write	mandatory	The backup real server for this group.
1.3.6.1.4.1.1872.2.1.5.11.1.7	ColumnslbNewCfgGroupDelete	read-write	mandatory	By setting the value to delete(2), the entire group is deleted.
1.3.6.1.4.1.1872.2.1.5.11.1.8	ColumnslbNewCfgGroupHealthCheckUrl	read-write	mandatory	The URL for health check among the real servers of this group.
1.3.6.1.4.1.1872.2.1.5.11.1.9	ColumnslbNewCfgGroupHealthCheckLayer	read-write	mandatory	The OSI layer at which servers are health checked.
1.3.6.1.4.1.1872.2.1.5.11.1.10	ColumnslbNewCfgGroupName	read-write	mandatory	The name of the real server group.
1.3.6.1.4.1.1872.2.1.5.11.1.11	ColumnslbNewCfgGroupRealThreshold	read-write	mandatory	The server failure syslog threshold of the real server group.
1.3.6.1.4.1.1872.2.1.5.11.1.12	ColumnslbNewCfgGroupBackupGroup	read-write	mandatory	The backup real server group for this group.
1.3.6.1.4.1.1872.2.1.5.12	TableslbCurCfgPortTable	not-accessible	mandatory	The table of ports and their SLB states
1.3.6.1.4.1.1872.2.1.5.12.1	RowslbCurCfgPortEntry	not-accessible	mandatory	A row in the slbPortTable
1.3.6.1.4.1.1872.2.1.5.12.1.1	ColumnslbCurCfgPortIndex	read-only	mandatory	The port number for which the SLB information pertains.
1.3.6.1.4.1.1872.2.1.5.12.1.2	ColumnslbCurCfgPortProxyIpAddr	read-only	mandatory	The proxy IP address of the interface.
1.3.6.1.4.1.1872.2.1.5.12.1.3	ColumnslbCurCfgPortSlbState	read-only	mandatory	The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOve…
1.3.6.1.4.1.1872.2.1.5.12.1.4	ColumnslbCurCfgPortSlbHotStandby	read-only	mandatory	Enable or disable hot standby processing on the switch port.
1.3.6.1.4.1.1872.2.1.5.12.1.5	ColumnslbCurCfgPortSlbInterSwitch	read-only	mandatory	Enable or disable inter-switch processing on the switch port.
1.3.6.1.4.1.1872.2.1.5.12.1.6	ColumnslbCurCfgPortSlbPipState	read-only	mandatory	Enable or disable use of proxy IP address on the switch port.
1.3.6.1.4.1.1872.2.1.5.13	TableslbNewCfgPortTable	not-accessible	mandatory	The table of ports and their SLB states
1.3.6.1.4.1.1872.2.1.5.13.1	RowslbNewCfgPortEntry	not-accessible	mandatory	A row in the slbPortTable
1.3.6.1.4.1.1872.2.1.5.13.1.1	ColumnslbNewCfgPortIndex	read-only	mandatory	The port number for which the SLB information pertains.
1.3.6.1.4.1.1872.2.1.5.13.1.2	ColumnslbNewCfgPortProxyIpAddr	read-write	mandatory	The proxy IP address of the interface.
1.3.6.1.4.1.1872.2.1.5.13.1.3	ColumnslbNewCfgPortSlbState	read-write	mandatory	The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOve…
1.3.6.1.4.1.1872.2.1.5.13.1.4	ColumnslbNewCfgPortSlbHotStandby	read-write	mandatory	Enable or disable hot standby processing on the switch port.
1.3.6.1.4.1.1872.2.1.5.13.1.5	ColumnslbNewCfgPortSlbInterSwitch	read-write	mandatory	Enable or disable inter-switch processing on the switch port.
1.3.6.1.4.1.1872.2.1.5.13.1.6	ColumnslbNewCfgPortSlbPipState	read-write	mandatory	Enable or disable use of proxy IP address on the switch port.
1.3.6.1.4.1.1872.2.1.5.14	ScalarslbCurCfgImask	read-only	mandatory	The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.15	ScalarslbNewCfgImask	read-write	mandatory	The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.16	Nodeslbfailover
1.3.6.1.4.1.1872.2.1.5.16.1	TableslbCurCfgFailOverTable	not-accessible	mandatory	The table of current switch fail-over configuration.
1.3.6.1.4.1.1872.2.1.5.16.1.1	RowslbCurCfgFailOverTblEntry	not-accessible	mandatory	A row in the current switch fail-over configuration table.
1.3.6.1.4.1.1872.2.1.5.16.1.1.1	ColumnslbCurCfgFailOverIndex	read-only	mandatory	The index of current switch fail-over configuration table.
1.3.6.1.4.1.1872.2.1.5.16.1.1.2	ColumnslbCurCfgFailOverPrimaryIp	read-only	mandatory	The IP address of the Primary switch.
1.3.6.1.4.1.1872.2.1.5.16.1.1.3	ColumnslbCurCfgFailOverSecondaryIp	read-only	mandatory	The IP address of the Secondary switch.
1.3.6.1.4.1.1872.2.1.5.16.1.1.4	ColumnslbCurCfgFailOverSilenceInterval	read-only	mandatory	Number of seconds before a silent peer is assumed down.
1.3.6.1.4.1.1872.2.1.5.16.1.1.5	ColumnslbCurCfgFailOverState	read-only	mandatory	Enable or disable slb switch failover feature.
1.3.6.1.4.1.1872.2.1.5.16.1.1.6	ColumnslbCurCfgFailOverRouteSupply	read-only	mandatory	Enable or disable to supply network routes update when switch is a standby switch.
1.3.6.1.4.1.1872.2.1.5.16.2	TableslbNewCfgFailOverTable	not-accessible	mandatory	The table of new switch fail-over configuration.
1.3.6.1.4.1.1872.2.1.5.16.2.1	RowslbNewCfgFailOverTblEntry	not-accessible	mandatory	A row in the new switch fail-over configuration table.
1.3.6.1.4.1.1872.2.1.5.16.2.1.1	ColumnslbNewCfgFailOverIndex	read-only	mandatory	The index of new switch fail-over configuration table.
1.3.6.1.4.1.1872.2.1.5.16.2.1.2	ColumnslbNewCfgFailOverPrimaryIp	read-write	mandatory	The IP address of the Primary switch.
1.3.6.1.4.1.1872.2.1.5.16.2.1.3	ColumnslbNewCfgFailOverSecondaryIp	read-write	mandatory	The IP address of the Secondary switch.
1.3.6.1.4.1.1872.2.1.5.16.2.1.4	ColumnslbNewCfgFailOverSilenceInterval	read-write	mandatory	Number of seconds before a silent peer is assumed down.
1.3.6.1.4.1.1872.2.1.5.16.2.1.5	ColumnslbNewCfgFailOverState	read-write	mandatory	Enable or disable slb switch failover feature.
1.3.6.1.4.1.1872.2.1.5.16.2.1.6	ColumnslbNewCfgFailOverRouteSupply	read-only	mandatory	Enable or disable to supply network routes update when switch is a standby switch.
1.3.6.1.4.1.1872.2.1.5.17	ScalarslbCurCfgGlobalControl	read-only	mandatory	The global state of Server Load Balancing.
1.3.6.1.4.1.1872.2.1.5.18	ScalarslbNewCfgGlobalControl	read-write	mandatory	The global state of Server Load Balancing.
1.3.6.1.4.1.1872.2.1.5.19	ScalarslbCurCfgMnet	read-only	mandatory	The management network - corresponding to the mnet command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.20	ScalarslbNewCfgMnet	read-write	mandatory	The management network - corresponding to the mnet command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.21	ScalarslbCurCfgMmask	read-only	mandatory	The management subnet mask - corresponding to the mmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.22	ScalarslbNewCfgMmask	read-write	mandatory	The management subnet mask - corresponding to the mmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.23	ScalarslbCurCfgRadiusAuthenString	read-only	mandatory	The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
1.3.6.1.4.1.1872.2.1.5.24	ScalarslbNewCfgRadiusAuthenString	read-write	mandatory	The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
1.3.6.1.4.1.1872.2.1.5.25	ScalarslbCurCfgDirectMode	read-only	mandatory	Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.1.5.26	ScalarslbNewCfgDirectMode	read-write	mandatory	Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.1.5.27	NodeslbUrl
1.3.6.1.4.1.1872.2.1.5.27.1	NodeslbUrlRedir
1.3.6.1.4.1.1872.2.1.5.27.1.1	TableslbCurCfgUrlExpTable	not-accessible	mandatory	The table of URL expressions in the current_config.
1.3.6.1.4.1.1872.2.1.5.27.1.1.1	RowslbCurCfgUrlExpTableEntry	not-accessible	mandatory	Information about a expression for URL parsing.
1.3.6.1.4.1.1872.2.1.5.27.1.1.1.1	ColumnslbCurCfgUrlExpIndex	read-only	mandatory	The URL expressions table index.
1.3.6.1.4.1.1872.2.1.5.27.1.1.1.2	ColumnslbCurCfgUrlExpression	read-only	mandatory	The expressions for URL parsing.
1.3.6.1.4.1.1872.2.1.5.27.1.2	TableslbNewCfgUrlExpTable	not-accessible	mandatory	The table of URL expressions in the new_config.
1.3.6.1.4.1.1872.2.1.5.27.1.2.1	RowslbNewCfgUrlExpTableEntry	not-accessible	mandatory	Information about a expression for URL parsing.
1.3.6.1.4.1.1872.2.1.5.27.1.2.1.1	ColumnslbNewCfgUrlExpIndex	read-only	mandatory	The URL expressions table index.
1.3.6.1.4.1.1872.2.1.5.27.1.2.1.2	ColumnslbNewCfgUrlExpression	read-write	mandatory	The expressions for URL parsing.
1.3.6.1.4.1.1872.2.1.5.27.1.2.1.3	ColumnslbNewCfgUrlExpDelete	read-write	mandatory	Action object to delete an URL expression. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value t…
1.3.6.1.4.1.1872.2.1.5.27.1.3	ScalarslbCurCfgUrlRedirNonGetOrigSrv	read-only	mandatory	This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the o…
1.3.6.1.4.1.1872.2.1.5.27.1.4	ScalarslbNewCfgUrlRedirNonGetOrigSrv	read-write	mandatory	This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the o…
1.3.6.1.4.1.1872.2.1.5.27.1.5	ScalarslbCurCfgUrlRedirCookieOrigSrv	read-only	mandatory	This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the or…
1.3.6.1.4.1.1872.2.1.5.27.1.6	ScalarslbNewCfgUrlRedirCookieOrigSrv	read-write	mandatory	This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the or…
1.3.6.1.4.1.1872.2.1.5.27.1.7	ScalarslbCurCfgUrlRedirNoCacheOrigSrv	read-only	mandatory	This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the…
1.3.6.1.4.1.1872.2.1.5.27.1.8	ScalarslbNewCfgUrlRedirNoCacheOrigSrv	read-write	mandatory	This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the…
1.3.6.1.4.1.1872.2.1.5.27.1.9	ScalarslbCurCfgUrlRedirUriHashLength	read-only	mandatory	Specify the number of bytes in the URI will be used to hash onto server
1.3.6.1.4.1.1872.2.1.5.27.1.10	ScalarslbNewCfgUrlRedirUriHashLength	read-write	mandatory	Specify the number of bytes in the URI will be used to hash onto server
1.3.6.1.4.1.1872.2.1.5.27.1.11	ScalarslbCurCfgUrlRedirHeader	read-only	mandatory	This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header d…
1.3.6.1.4.1.1872.2.1.5.27.1.12	ScalarslbNewCfgUrlRedirHeader	read-write	mandatory	This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header d…
1.3.6.1.4.1.1872.2.1.5.27.1.13	ScalarslbCurCfgUrlRedirHeaderName	read-only	mandatory	HTTP header name
1.3.6.1.4.1.1872.2.1.5.27.1.14	ScalarslbNewCfgUrlRedirHeaderName	read-write	mandatory	HTTP header name
1.3.6.1.4.1.1872.2.1.5.27.2	NodeslbUrlBalance
1.3.6.1.4.1.1872.2.1.5.27.2.1	TableslbCurCfgUrlLbPathTable	not-accessible	mandatory	The table of URL path for URL load balancing in the current_config.
1.3.6.1.4.1.1872.2.1.5.27.2.1.1	RowslbCurCfgUrlLbPathTableEntry	not-accessible	mandatory	Information about an URL path for URL load balancing.
1.3.6.1.4.1.1872.2.1.5.27.2.1.1.1	ColumnslbCurCfgUrlLbPathIndex	read-only	mandatory	The URL path table index.
1.3.6.1.4.1.1872.2.1.5.27.2.1.1.2	ColumnslbCurCfgUrlLbPathString	read-only	mandatory	The URL path for URL load balancing.
1.3.6.1.4.1.1872.2.1.5.27.2.2	TableslbNewCfgUrlLbPathTable	not-accessible	mandatory	The table of URL path for URL load balancing in the new_config.
1.3.6.1.4.1.1872.2.1.5.27.2.2.1	RowslbNewCfgUrlLbPathTableEntry	not-accessible	mandatory	Information about an URL path for URL load balancing.
1.3.6.1.4.1.1872.2.1.5.27.2.2.1.1	ColumnslbNewCfgUrlLbPathIndex	read-only	mandatory	The URL path table index.
1.3.6.1.4.1.1872.2.1.5.27.2.2.1.2	ColumnslbNewCfgUrlLbPathString	read-write	mandatory	The URL path for URL load balancing.
1.3.6.1.4.1.1872.2.1.5.27.2.2.1.3	ColumnslbNewCfgUrlLbPathDelete	read-write	mandatory	Action object to delete an URL Path. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anyt…
1.3.6.1.4.1.1872.2.1.5.27.2.3	ScalarslbCurCfgUrlLbErrorMsg	read-only	mandatory	Customize error message to send back to client when switch cannot bind client's request to servers.
1.3.6.1.4.1.1872.2.1.5.27.2.4	ScalarslbNewCfgUrlLbErrorMsg	read-write	mandatory	Customize error message to send back to client when switch cannot bind client's request to servers.
1.3.6.1.4.1.1872.2.1.5.28	ScalarslbCurCfgPmask	read-only	mandatory	The persistent mask - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.29	ScalarslbNewCfgPmask	read-write	mandatory	The persistent mask - corresponding to the pmask command of the slb configuration menu.
1.3.6.1.4.1.1872.2.1.5.30	ScalarslbCurCfgGrace	read-only	mandatory	Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.1.5.31	ScalarslbNewCfgGrace	read-write	mandatory	Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
1.3.6.1.4.1.1872.2.1.5.32	TableslbCurCfgPeerTable	not-accessible	mandatory	The table of Synch Peer Switch configuration in the current_config.
1.3.6.1.4.1.1872.2.1.5.32.1	RowslbCurCfgPeerEntry	not-accessible	mandatory	Information about Synch Peer Switch configuration.
1.3.6.1.4.1.1872.2.1.5.32.1.1	ColumnslbCurCfgPeerIndex	read-only	mandatory	The index for synch peer switchs.
1.3.6.1.4.1.1872.2.1.5.32.1.2	ColumnslbCurCfgPeerIpAddr	read-only	mandatory	The IP address of the peer switch.
1.3.6.1.4.1.1872.2.1.5.32.1.3	ColumnslbCurCfgPeerState	read-only	mandatory	Enable or disable the peer switch.
1.3.6.1.4.1.1872.2.1.5.33	TableslbNewCfgPeerTable	not-accessible	mandatory	The table of Synch Peer Switch configuration in the new_config.
1.3.6.1.4.1.1872.2.1.5.33.1	RowslbNewCfgPeerEntry	not-accessible	mandatory	Information about synch peer switch configuration.
1.3.6.1.4.1.1872.2.1.5.33.1.1	ColumnslbNewCfgPeerIndex	read-only	mandatory	The index number for synch peer switchs.
1.3.6.1.4.1.1872.2.1.5.33.1.2	ColumnslbNewCfgPeerIpAddr	read-write	mandatory	The IP address of the peer switch.
1.3.6.1.4.1.1872.2.1.5.33.1.3	ColumnslbNewCfgPeerState	read-write	mandatory	Enable or disable the peer switch.
1.3.6.1.4.1.1872.2.1.5.33.1.4	ColumnslbNewCfgPeerDelete	read-write	mandatory	By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.1.5.34	ScalarslbCurCfgSyncFilt	read-only	mandatory	Enable or disable synch filter configuration.
1.3.6.1.4.1.1872.2.1.5.35	ScalarslbNewCfgSyncFilt	read-write	mandatory	Enable or disable synch filter configuration.
1.3.6.1.4.1.1872.2.1.5.36	ScalarslbCurCfgSyncPort	read-only	mandatory	Enable or disable synch port configuration.
1.3.6.1.4.1.1872.2.1.5.37	ScalarslbNewCfgSyncPort	read-write	mandatory	Enable or disable synch port configuration.
1.3.6.1.4.1.1872.2.1.5.38	ScalarslbCurCfgSyncVrrp	read-only	mandatory	Enable or disable synch VRRP Priorities.
1.3.6.1.4.1.1872.2.1.5.39	ScalarslbNewCfgSyncVrrp	read-write	mandatory	Enable or disable synch VRRP Priorities.
1.3.6.1.4.1.1872.2.1.5.40	ScalarslbCurCfgSyncPip	read-only	mandatory	Enable or disable synch proxy IP addresses.
1.3.6.1.4.1.1872.2.1.5.41	ScalarslbNewCfgSyncPip	read-write	mandatory	Enable or disable synch proxy IP addresses.
1.3.6.1.4.1.1872.2.1.5.42	ScalarslbCurCfgVirtMatrixArch	read-only	mandatory	Enable or disable Virtual Matrix Architecture.
1.3.6.1.4.1.1872.2.1.5.43	ScalarslbNewCfgVirtMatrixArch	read-write	mandatory	Enable or disable Virtual Matrix Architecture.
1.3.6.1.4.1.1872.2.1.6	Nodeportmirroring
1.3.6.1.4.1.1872.2.1.6.1	ScalarpmCurCfgMonitoringPort	read-only	mandatory	The port number of the monitoring port.
1.3.6.1.4.1.1872.2.1.6.2	ScalarpmNewCfgMonitoringPort	read-write	mandatory	The port number of the monitoring port.
1.3.6.1.4.1.1872.2.1.6.3	ScalarpmCurCfgMirroredPort	read-only	mandatory	The port number of the mirrored port.
1.3.6.1.4.1.1872.2.1.6.4	ScalarpmNewCfgMirroredPort	read-write	mandatory	The port number of the mirrored port.
1.3.6.1.4.1.1872.2.1.6.5	ScalarpmCurCfgMonitoredTraffic	read-only	mandatory	The type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.1872.2.1.6.6	ScalarpmNewCfgMonitoredTraffic	read-write	mandatory	The type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.1872.2.1.6.7	ScalarpmCurCfgState	read-only	mandatory	The state of Port mirroring.
1.3.6.1.4.1.1872.2.1.6.8	ScalarpmNewCfgState	read-write	mandatory	The state of Port mirroring.
1.3.6.1.4.1.1872.2.1.7	Nodetrunkgroup
1.3.6.1.4.1.1872.2.1.7.1	ScalartrunkGroupTableMaxSize	read-only	mandatory	The maximum number of entries in trunk group table.
1.3.6.1.4.1.1872.2.1.7.2	TabletrunkGroupCurCfgTable	not-accessible	mandatory	The table of trunk group configuration.
1.3.6.1.4.1.1872.2.1.7.2.1	RowtrunkGroupCurCfgTableEntry	not-accessible	mandatory	A row in the trunk group configuration table.
1.3.6.1.4.1.1872.2.1.7.2.1.1	ColumntrunkGroupCurCfgIndex	read-only	mandatory	The identifier of the trunk group.
1.3.6.1.4.1.1872.2.1.7.2.1.2	ColumntrunkGroupCurCfgPorts	read-only	mandatory	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|…
1.3.6.1.4.1.1872.2.1.7.2.1.3	ColumntrunkGroupCurCfgState	read-only	mandatory	Enable or disable a trunk group.
1.3.6.1.4.1.1872.2.1.7.2.1.4	ColumntrunkGroupCurCfgBwmContract	read-only	mandatory	Default BW contract of a trunk group.
1.3.6.1.4.1.1872.2.1.7.3	TabletrunkGroupNewCfgTable	not-accessible	mandatory	The table of trunk group configuration.
1.3.6.1.4.1.1872.2.1.7.3.1	RowtrunkGroupNewCfgTableEntry	not-accessible	mandatory	A row in the trunk group configuration table.
1.3.6.1.4.1.1872.2.1.7.3.1.1	ColumntrunkGroupNewCfgIndex	read-only	mandatory	The identifier of the trunk group.
1.3.6.1.4.1.1872.2.1.7.3.1.2	ColumntrunkGroupNewCfgPorts	read-only	mandatory	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|…
1.3.6.1.4.1.1872.2.1.7.3.1.3	ColumntrunkGroupNewCfgAddPort	read-write	mandatory	The port to be added in the trunk group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.1.7.3.1.4	ColumntrunkGroupNewCfgRemovePort	read-write	mandatory	The port to be deleted from the trunk group. when read, 0 is returned.
1.3.6.1.4.1.1872.2.1.7.3.1.5	ColumntrunkGroupNewCfgState	read-write	mandatory	Enable or disable a trunk group.
1.3.6.1.4.1.1872.2.1.7.3.1.6	ColumntrunkGroupNewCfgDelete	read-write	mandatory	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.1872.2.1.7.3.1.7	ColumntrunkGroupNewCfgBwmContract	read-write	mandatory	Default BW contract of a trunk group.
1.3.6.1.4.1.1872.2.1.8	Nodestats
1.3.6.1.4.1.1872.2.1.8.1	NoderipStats
1.3.6.1.4.1.1872.2.1.8.1.1	ScalarripStatInPkts	read-only	mandatory	The total number of good RIP packets recieved.
1.3.6.1.4.1.1872.2.1.8.1.2	ScalarripStatOutPkts	read-only	mandatory	The total number of RIP packets transmitted.
1.3.6.1.4.1.1872.2.1.8.1.3	ScalarripStatInErrorPkts	read-only	mandatory	The total number of error RIP packets recieved.
1.3.6.1.4.1.1872.2.1.8.2	NodeslbStats
1.3.6.1.4.1.1872.2.1.8.2.1	TableslbStatPortMaintTable	not-accessible	mandatory	The table of SLB port maintenance statistics.
1.3.6.1.4.1.1872.2.1.8.2.1.1	RowslbStatPortMaintEntry	not-accessible	mandatory	A row in the SLB port maintenance statistcs table.
1.3.6.1.4.1.1872.2.1.8.2.1.1.1	ColumnslbStatPortMaintPortIndex	read-only	mandatory	The port number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.2.1.1.2	ColumnslbStatPortMaintCurBindings	read-only	mandatory	The current number of bindings on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.3	ColumnslbStatPortMaintBindingFails	read-only	mandatory	The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries.
1.3.6.1.4.1.1872.2.1.8.2.1.1.4	ColumnslbStatPortMaintNonTcpFrames	read-only	mandatory	The total number of non-TCP/IP frames dropped on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.5	ColumnslbStatPortMaintTcpFragments	read-only	mandatory	The total number of TCP fragments dropped on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.6	ColumnslbStatPortMaintUdpDatagrams	read-only	mandatory	The total number of UDP datagrams dropped on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.7	ColumnslbStatPortMaintIncorrectVIPs	read-only	mandatory	The total number of frames with incorrect VIPs that are dropped on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.8	ColumnslbStatPortMaintIncorrectVports	read-only	mandatory	The total number of frames with incorrect Virtual Port that are dropped on the port.
1.3.6.1.4.1.1872.2.1.8.2.1.1.9	ColumnslbStatPortMaintRealServerNoAvails	read-only	mandatory	The total number of frames that are dropped on the port because no real server is available.
1.3.6.1.4.1.1872.2.1.8.2.1.1.10	ColumnslbStatPortMaintFilteredDeniedFrames	read-only	mandatory	The total number of frames that are denied on the port by the filter.
1.3.6.1.4.1.1872.2.1.8.2.2	TableslbStatPortRealServerTable	not-accessible	mandatory	The port-server statistics table. This table shows the statistics of real servers that are connectted to switch ports.
1.3.6.1.4.1.1872.2.1.8.2.2.1	RowslbStatPortRealServerEntry	not-accessible	mandatory	A row in the port-server statistics table.
1.3.6.1.4.1.1872.2.1.8.2.2.1.1	ColumnslbStatPortRealServerPortIndex	read-only	mandatory	The port number that identifies the switch port.
1.3.6.1.4.1.1872.2.1.8.2.2.1.2	ColumnslbStatPortRealServerServerIndex	read-only	mandatory	The real server number that identifies the server.
1.3.6.1.4.1.1872.2.1.8.2.2.1.3	ColumnslbStatPortRealServerCurrSessions	read-only	mandatory	The current sessions for the real server.
1.3.6.1.4.1.1872.2.1.8.2.2.1.4	ColumnslbStatPortRealServerTotalSessions	read-only	mandatory	The total number of sessions for the real server.
1.3.6.1.4.1.1872.2.1.8.2.2.1.5	ColumnslbStatPortRealServerHCOctets	read-only	mandatory	The total number of octets received and transmitted out of the real server on a particular port.
1.3.6.1.4.1.1872.2.1.8.2.2.1.6	ColumnslbStatPortRealServerHCOctetsLow32	read-only	mandatory	The lower 32 bit value of the total octets received and transmitted out of the real server on a particular port.
1.3.6.1.4.1.1872.2.1.8.2.2.1.7	ColumnslbStatPortRealServerHCOctetsHigh32	read-only	mandatory	The higher 32 bit value of the total octets received and transmitted out of the real server on a particular port.
1.3.6.1.4.1.1872.2.1.8.2.3	ScalarslbStatMaintBackupServActs	read-only	mandatory	The total number of times that backup servers become active due to failure of primary servers.
1.3.6.1.4.1.1872.2.1.8.2.4	ScalarslbStatMaintOverflowServActs	read-only	mandatory	The total number of times that backup servers become active due to primary servers reach overflow situation.
1.3.6.1.4.1.1872.2.1.8.2.5	TableslbStatRServerTable	not-accessible	mandatory	The real server statistics table.
1.3.6.1.4.1.1872.2.1.8.2.5.1	RowslbStatRServerEntry	not-accessible	mandatory	The statistics of a particular real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.1	ColumnslbStatRServerIndex	read-only	mandatory	The real server number that identifies the server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.2	ColumnslbStatRServerCurrSessions	read-only	mandatory	The number of sessions that are currently handled by the real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.3	ColumnslbStatRServerTotalSessions	read-only	mandatory	The total number of sessions that are handled by the real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.4	ColumnslbStatRServerFailures	read-only	mandatory	The total number of times that the real server is claimed down.
1.3.6.1.4.1.1872.2.1.8.2.5.1.5	ColumnslbStatRServerHighestSessions	read-only	mandatory	The highest sessions that have been handled by the real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.6	ColumnslbStatRServerHCOctets	read-only	mandatory	The total number of octets received and transmitted out of the real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.7	ColumnslbStatRServerHCOctetsLow32	read-only	mandatory	The lower 32 bit value of octets received and transmitted out of the real server.
1.3.6.1.4.1.1872.2.1.8.2.5.1.8	ColumnslbStatRServerHCOctetsHigh32	read-only	mandatory	The higher 32 bit value of octets received and transmitted out of the real server.
1.3.6.1.4.1.1872.2.1.8.2.6	TableslbStatGroupTable	not-accessible	mandatory	The real server group statistics table.
1.3.6.1.4.1.1872.2.1.8.2.6.1	RowslbStatGroupEntry	not-accessible	mandatory	The statistics of a particular real server group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.1	ColumnslbStatGroupIndex	read-only	mandatory	The real server group number that identifies the group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.2	ColumnslbStatGroupCurrSessions	read-only	mandatory	The number of sessions that are currently handled by the real server group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.3	ColumnslbStatGroupTotalSessions	read-only	mandatory	The total number of sessions that are handled by the real server group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.4	ColumnslbStatGroupHighestSessions	read-only	mandatory	The highest sessions that have been handled by the real server.
1.3.6.1.4.1.1872.2.1.8.2.6.1.5	ColumnslbStatGroupHCOctets	read-only	mandatory	The total number of octets received and transmitted out of the real server group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.6	ColumnslbStatGroupHCOctetsLow32	read-only	mandatory	The lower 32 bit value of octets received and transmitted out of the real server group.
1.3.6.1.4.1.1872.2.1.8.2.6.1.7	ColumnslbStatGroupHCOctetsHigh32	read-only	mandatory	The higher 32 bit value of octets received and transmitted out of the real server group.
1.3.6.1.4.1.1872.2.1.8.2.7	TableslbStatVServerTable	not-accessible	mandatory	The virtual server statistics table.
1.3.6.1.4.1.1872.2.1.8.2.7.1	RowslbStatVServerEntry	not-accessible	mandatory	The statistics of a particular virtual server group.
1.3.6.1.4.1.1872.2.1.8.2.7.1.1	ColumnslbStatVServerIndex	read-only	mandatory	The virtual server number that identifies the server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.2	ColumnslbStatVServerCurrSessions	read-only	mandatory	The number of sessions that are currently handled by the virtual server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.3	ColumnslbStatVServerTotalSessions	read-only	mandatory	The total number of sessions that are handled by the virtual server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.4	ColumnslbStatVServerHighestSessions	read-only	mandatory	The highest sessions that have been handled by the real server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.5	ColumnslbStatVServerHCOctets	read-only	mandatory	The total number of octets received and transmitted out of the virtual server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.6	ColumnslbStatVServerHCOctetsLow32	read-only	mandatory	The lower 32 bit value of octets received and transmitted out of the virtual server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.7	ColumnslbStatVServerHCOctetsHigh32	read-only	mandatory	The higher 32 bit value of octets received and transmitted out of the virtual server.
1.3.6.1.4.1.1872.2.1.8.2.7.1.8	ColumnslbStatVServerHeaderHits	read-only	mandatory	The current HTTP header hits.
1.3.6.1.4.1.1872.2.1.8.2.7.1.9	ColumnslbStatVServerHeaderMisses	read-only	mandatory	The current HTTP header misses.
1.3.6.1.4.1.1872.2.1.8.2.7.1.10	ColumnslbStatVServerHeaderTotalSessions	read-only	mandatory	The total HTTP header sessions.
1.3.6.1.4.1.1872.2.1.8.3	NodearpStats
1.3.6.1.4.1.1872.2.1.8.3.1	ScalararpStatEntries	read-only	mandatory	The current number of ARP entries.
1.3.6.1.4.1.1872.2.1.8.3.2	ScalararpStatHighWater	read-only	mandatory	The highest number of ARP entries.
1.3.6.1.4.1.1872.2.1.8.3.3	ScalararpStatMaxEntries	read-only	mandatory	The maximum number of ARP entries.
1.3.6.1.4.1.1872.2.1.8.4	NoderouteStats
1.3.6.1.4.1.1872.2.1.8.4.1	ScalarrouteStatEntries	read-only	mandatory	The current number of IP routes.
1.3.6.1.4.1.1872.2.1.8.4.2	ScalarrouteStatHighWater	read-only	mandatory	The highest number of IP routes.
1.3.6.1.4.1.1872.2.1.8.4.3	ScalarrouteStatMaxEntries	read-only	mandatory	The maximum number of IP routes.
1.3.6.1.4.1.1872.2.1.8.5	NodednsStats
1.3.6.1.4.1.1872.2.1.8.5.1	ScalardnsStatInGoodDnsRequests	read-only	mandatory	The number of good DNS requests which are received.
1.3.6.1.4.1.1872.2.1.8.5.2	ScalardnsStatInBadDnsRequests	read-only	mandatory	The number of bad DNS requests which are received.
1.3.6.1.4.1.1872.2.1.8.6	NodefilterStats
1.3.6.1.4.1.1872.2.1.8.6.1	TablefltStatTable	not-accessible	mandatory	The filter statistics table.
1.3.6.1.4.1.1872.2.1.8.6.1.1	RowfltStatTableEntry	not-accessible	mandatory	A row in filter statistics table.
1.3.6.1.4.1.1872.2.1.8.6.1.1.1	ColumnfltStatFltIndex	read-only	mandatory	The number that identifies the filter.
1.3.6.1.4.1.1872.2.1.8.6.1.1.2	ColumnfltStatFltFirings	read-only	mandatory	The number of instances that the received packet matches the filter rule.
1.3.6.1.4.1.1872.2.1.8.7	NodegslbStats
1.3.6.1.4.1.1872.2.1.8.7.1	TablegslbStatRemRealServerTable	not-accessible	mandatory	The GSLB remote real server statistics table.
1.3.6.1.4.1.1872.2.1.8.7.1.1	RowgslbStatRemRealServerEntry	not-accessible	mandatory	A row in the remote real server statistics table.
1.3.6.1.4.1.1872.2.1.8.7.1.1.1	ColumngslbStatRemRealServerIndex	read-only	mandatory	The server number that identifies the remote real server.
1.3.6.1.4.1.1872.2.1.8.7.1.1.2	ColumngslbStatRemRealServerDnsHandoffs	read-only	mandatory	The number of DNS hanfoffs by the remote real server.
1.3.6.1.4.1.1872.2.1.8.7.1.1.3	ColumngslbStatRemRealServerHttpRedirs	read-only	mandatory	The number of HTTP redirections by the remote real server.
1.3.6.1.4.1.1872.2.1.8.8	NodegslbMaintStats
1.3.6.1.4.1.1872.2.1.8.8.1	ScalargslbStatMaintInGoodSiteUpdates	read-only	mandatory	The number of good remote site updates which are received.
1.3.6.1.4.1.1872.2.1.8.8.2	ScalargslbStatMaintInBadSiteUpdates	read-only	mandatory	The number of bad remote site updates which are received.
1.3.6.1.4.1.1872.2.1.8.9	NodevrrpStats
1.3.6.1.4.1.1872.2.1.8.9.1	ScalarvrrpStatInAdvers	read-only	mandatory	The number of good VRRP advertisements which are received.
1.3.6.1.4.1.1872.2.1.8.9.2	ScalarvrrpStatOutAdvers	read-only	mandatory	The number of good VRRP advertisements which are transmitted.
1.3.6.1.4.1.1872.2.1.8.9.3	ScalarvrrpStatOutBadAdvers	read-only	mandatory	The number of bad VRRP advertisements which are received.
1.3.6.1.4.1.1872.2.1.8.10	NodeurlStats
1.3.6.1.4.1.1872.2.1.8.10.1	NodeurlRedirStats
1.3.6.1.4.1.1872.2.1.8.10.1.1	ScalarurlStatRedRedirs	read-only	mandatory	The number of instances that the received packet matches the specified URL expressions and redirected to specified group of real servers.
1.3.6.1.4.1.1872.2.1.8.10.1.2	ScalarurlStatRedOrigSrvs	read-only	mandatory	The number of instances that the received packet is sent to the origin server due to mis-match with the specified URL expressions or detecting of HTTP non-GETs…
1.3.6.1.4.1.1872.2.1.8.10.1.3	ScalarurlStatRedNonGets	read-only	mandatory	The number of instances that the received packet contains none GETs(POST ,HEAD ,PUT..) methods.
1.3.6.1.4.1.1872.2.1.8.10.1.4	ScalarurlStatRedCookie	read-only	mandatory	The number of instances that the received packet contains a 'Cookie: ' header.
1.3.6.1.4.1.1872.2.1.8.10.1.5	ScalarurlStatRedNoCache	read-only	mandatory	The number of instances that the received packet contains a no-cache header value.
1.3.6.1.4.1.1872.2.1.8.10.2	NodeurlSlbStats
1.3.6.1.4.1.1872.2.1.8.10.2.1	TableurlStatSlbPathTable	not-accessible	mandatory	The statistics table of instances that URL pathes matched.
1.3.6.1.4.1.1872.2.1.8.10.2.1.1	RowurlStatSlbPathTableEntry	not-accessible	mandatory	Information about the number of instances that are load-balanced due to match of a particular URL path.
1.3.6.1.4.1.1872.2.1.8.10.2.1.1.1	ColumnurlStatSlbPathIndex	read-only	mandatory	The URL path table index.
1.3.6.1.4.1.1872.2.1.8.10.2.1.1.2	ColumnurlStatSlbPathHits	read-only	mandatory	The number of instances that are load-balanced due to match of the particular URL path.
1.3.6.1.4.1.1872.2.1.8.11	NodetcpStats
1.3.6.1.4.1.1872.2.1.8.11.1	ScalartcpStatCurConns	read-only	mandatory	The total number of outstanding TCP connections have been established.
1.3.6.1.4.1.1872.2.1.8.11.2	ScalartcpStatHalfOpens	read-only	mandatory	The total number of outstanding TCP connections have been half opened. This statistics is valid only when URL parsing has been truned on. It is incremented whe…
1.3.6.1.4.1.1872.2.1.8.12	NodememStats
1.3.6.1.4.1.1872.2.1.8.12.1	ScalarmemStatsAllocs	read-only	mandatory	The total number of memory allocations.
1.3.6.1.4.1.1872.2.1.8.12.2	ScalarmemStatsFrees	read-only	mandatory	The total number of memory frees.
1.3.6.1.4.1.1872.2.1.8.12.3	ScalarmemStatsAllocFails	read-only	mandatory	The total number of memory allocations failed.
1.3.6.1.4.1.1872.2.1.8.12.4	ScalarmemStatsBytesCurr	read-only	mandatory	The outstanding memory in bytes have been allocated.
1.3.6.1.4.1.1872.2.1.8.12.5	ScalarmemStatsBytesHiwat	read-only	mandatory	The highest number of bytes have even been allocated.
1.3.6.1.4.1.1872.2.1.8.12.6	ScalarmemStatsPoolBytes	read-only	mandatory	The total bytes in the memory pool.
1.3.6.1.4.1.1872.2.1.8.12.7	ScalarmemStatsLargest	read-only	mandatory	The largest block has been allocated.
1.3.6.1.4.1.1872.2.1.8.13	NodepktStats
1.3.6.1.4.1.1872.2.1.8.13.1	ScalarpktStatsAllocs	read-only	mandatory	The total packets have been allocated.
1.3.6.1.4.1.1872.2.1.8.13.2	ScalarpktStatsFrees	read-only	mandatory	The total packets have been freed.
1.3.6.1.4.1.1872.2.1.8.13.3	ScalarpktStatsAllocFails	read-only	mandatory	The total packet allocations failed.
1.3.6.1.4.1.1872.2.1.8.13.4	ScalarpktStatsMediums	read-only	mandatory	The number of medium size packets have been allocated.
1.3.6.1.4.1.1872.2.1.8.13.5	ScalarpktStatsJumbos	read-only	mandatory	The number of jumbo size packets have been allocated.
1.3.6.1.4.1.1872.2.1.8.13.6	ScalarpktStatsSmalls	read-only	mandatory	The number of small size packets have been allocated.
1.3.6.1.4.1.1872.2.1.8.14	NodeftpStats
1.3.6.1.4.1.1872.2.1.8.14.1	NodeftpSlbStats
1.3.6.1.4.1.1872.2.1.8.14.1.1	ScalarftpSlbStatTotal	read-only	mandatory	The total number of ftp control sesssion for SLB received after FTP parsing turn on.
1.3.6.1.4.1.1872.2.1.8.14.1.2	ScalarftpNatStatTotal	read-only	mandatory	The total number of FTP control session for NAT received after active FTP is turn on.
1.3.6.1.4.1.1872.2.1.8.15	NodebwmStats
1.3.6.1.4.1.1872.2.1.8.15.1	TablebwmStatTcTable	not-accessible	mandatory	The table of Bandwidth Management Traffic Contract statistics.
1.3.6.1.4.1.1872.2.1.8.15.1.1	RowbwmStatTcEntry	not-accessible	mandatory	A row in the BWM traffic contract table.
1.3.6.1.4.1.1872.2.1.8.15.1.1.1	ColumnbwmStatTcContractIndex	read-only	mandatory	The contract queue number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.1.1.2	ColumnbwmStatTcName	read-only	mandatory	The name of the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.1.1.3	ColumnbwmStatTcOutoct	read-only	mandatory	The total number of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.1.1.4	ColumnbwmStatTcOutdisoct	read-only	mandatory	The total number of octets dropped from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.1.1.5	ColumnbwmStatTcBufferUsed	read-only	mandatory	The total number of buffers used by the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.1.1.6	ColumnbwmStatTcBufferMax	read-only	mandatory	The total number of buffers assigned to the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2	TablebwmStatTcrTable	not-accessible	mandatory	The table of Bandwidth Management Traffic Contract Rate statistics.
1.3.6.1.4.1.1872.2.1.8.15.2.1	RowbwmStatTcrEntry	not-accessible	mandatory	A row in the BWM traffic contract rate table.
1.3.6.1.4.1.1872.2.1.8.15.2.1.1	ColumnbwmStatTcrContractIndex	read-only	mandatory	The contract queue number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.2.1.2	ColumnbwmStatTcrName	read-only	mandatory	The name of the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2.1.3	ColumnbwmStatTcrRate	read-only	mandatory	The rate of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2.1.4	ColumnbwmStatTcrOutoct	read-only	mandatory	The of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2.1.5	ColumnbwmStatTcrOutdisoct	read-only	mandatory	The total number of octets dropped from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2.1.6	ColumnbwmStatTcrBufferUsed	read-only	mandatory	The total number of buffers used by the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.2.1.7	ColumnbwmStatTcrBufferMax	read-only	mandatory	The total number of buffers assigned to the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.3	TablebwmStatSpTcTable	not-accessible	mandatory	The table of Bandwidth Management Switch Port Traffic Contract statistics.
1.3.6.1.4.1.1872.2.1.8.15.3.1	RowbwmStatSpTcEntry	not-accessible	mandatory	A row in the BWM SP traffic contract table.
1.3.6.1.4.1.1872.2.1.8.15.3.1.1	ColumnbwmStatSpTcPortIndex	read-only	mandatory	The Switch Port number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.3.1.2	ColumnbwmStatSpTcContractIndex	read-only	mandatory	The contract queue number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.3.1.3	ColumnbwmStatSpTcName	read-only	mandatory	The name of the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.3.1.4	ColumnbwmStatSpTcOutoct	read-only	mandatory	The total number of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.3.1.5	ColumnbwmStatSpTcOutdisoct	read-only	mandatory	The total number of octets dropped from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.3.1.6	ColumnbwmStatSpTcBufferUsed	read-only	mandatory	The total number of buffers used by the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.3.1.7	ColumnbwmStatSpTcBufferMax	read-only	mandatory	The total number of buffers assigned to the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4	TablebwmStatSpTcrTable	not-accessible	mandatory	The table of Bandwidth Management Switch Port Traffic Contract Rate statistics.
1.3.6.1.4.1.1872.2.1.8.15.4.1	RowbwmStatSpTcrEntry	not-accessible	mandatory	A row in the BWM traffic contract rate table.
1.3.6.1.4.1.1872.2.1.8.15.4.1.1	ColumnbwmStatSpTcrPortIndex	read-only	mandatory	The switch port number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.4.1.2	ColumnbwmStatSpTcrContractIndex	read-only	mandatory	The contract queue number for which the statistics apply.
1.3.6.1.4.1.1872.2.1.8.15.4.1.3	ColumnbwmStatSpTcrName	read-only	mandatory	The name of the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4.1.4	ColumnbwmStatSpTcrRate	read-only	mandatory	The rate of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4.1.5	ColumnbwmStatSpTcrOutoct	read-only	mandatory	The of octets sent out from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4.1.6	ColumnbwmStatSpTcrOutdisoct	read-only	mandatory	The total number of octets dropped from the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4.1.7	ColumnbwmStatSpTcrBufferUsed	read-only	mandatory	The total number of buffers used by the traffic contract queue.
1.3.6.1.4.1.1872.2.1.8.15.4.1.8	ColumnbwmStatSpTcrBufferMax	read-only	mandatory	The total number of buffers assigned to the traffic contract queue.
1.3.6.1.4.1.1872.2.1.9	Nodeinformation
1.3.6.1.4.1.1872.2.1.9.1	Nodeport-info
1.3.6.1.4.1.1872.2.1.9.1.1	TableportInfoTable	not-accessible	mandatory	The table of port information.
1.3.6.1.4.1.1872.2.1.9.1.1.1	RowportInfoTableEntry	not-accessible	mandatory	A row in the port information table.
1.3.6.1.4.1.1872.2.1.9.1.1.1.1	ColumnportInfoIndx	read-only	mandatory	The port index.
1.3.6.1.4.1.1872.2.1.9.1.1.1.2	ColumnportInfoSpeed	read-only	mandatory	The current operational speed of the port.
1.3.6.1.4.1.1872.2.1.9.1.1.1.3	ColumnportInfoMode	read-only	mandatory	The current operational mode of the port.
1.3.6.1.4.1.1872.2.1.9.1.1.1.4	ColumnportInfoFlowCtrl	read-only	mandatory	The current operational flow control of the port.
1.3.6.1.4.1.1872.2.1.9.1.1.1.5	ColumnportInfoLink	read-only	mandatory	The current operational link status of the port.
1.3.6.1.4.1.1872.2.1.9.2	Nodeslb-info
1.3.6.1.4.1.1872.2.1.9.2.1	TableslbFailOverInfoTable	not-accessible	mandatory	The table of switch fail-over run-time status.
1.3.6.1.4.1.1872.2.1.9.2.1.1	RowslbFailOverInfoEntry	not-accessible	mandatory	A row in the switch fail-over information table.
1.3.6.1.4.1.1872.2.1.9.2.1.1.1	ColumnslbFailOverInfoIndex	read-only	mandatory	The index of switch fail-over information table.
1.3.6.1.4.1.1872.2.1.9.2.1.1.2	ColumnslbFailOverInfoPrimaryIp	read-only	mandatory	IP address of the primary switch.
1.3.6.1.4.1.1872.2.1.9.2.1.1.3	ColumnslbFailOverInfoPrimaryStatus	read-only	mandatory	The current operational status of the primary switch.
1.3.6.1.4.1.1872.2.1.9.2.1.1.4	ColumnslbFailOverInfoPrimaryState	read-only	mandatory	The current operational state of the primary switch.
1.3.6.1.4.1.1872.2.1.9.2.1.1.5	ColumnslbFailOverInfoSecondaryIp	read-only	mandatory	IP address of the secondary switch.
1.3.6.1.4.1.1872.2.1.9.2.1.1.6	ColumnslbFailOverInfoSecondaryStatus	read-only	mandatory	The current operational status of the secondary switch.
1.3.6.1.4.1.1872.2.1.9.2.1.1.7	ColumnslbFailOverInfoSecondaryState	read-only	mandatory	The current operational state of the secondary switch.
1.3.6.1.4.1.1872.2.1.9.2.2	TableslbRealServerInfoTable	not-accessible	mandatory	The table of real server run-time information.
1.3.6.1.4.1.1872.2.1.9.2.2.1	RowslbRealServerInfoEntry	not-accessible	mandatory	A row in the real server information table.
1.3.6.1.4.1.1872.2.1.9.2.2.1.1	ColumnslbRealServerInfoIndex	read-only	mandatory	The real server index
1.3.6.1.4.1.1872.2.1.9.2.2.1.2	ColumnslbRealServerInfoIpAddr	read-only	mandatory	IP address of the real server.
1.3.6.1.4.1.1872.2.1.9.2.2.1.3	ColumnslbRealServerMacAddr	read-only	mandatory	The MAC address of the real server.
1.3.6.1.4.1.1872.2.1.9.2.2.1.4	ColumnslbRealServerInfoSwitchPort	read-only	mandatory	The switch port that the real server is connected to.
1.3.6.1.4.1.1872.2.1.9.2.2.1.5	ColumnslbRealServerInfoHealthLayer	read-only	mandatory	The OSI layer at whitch real server functionality is verified.
1.3.6.1.4.1.1872.2.1.9.2.2.1.6	ColumnslbRealServerInfoOverflow	read-only	mandatory	The overflow state of the real server.
1.3.6.1.4.1.1872.2.1.9.2.2.1.7	ColumnslbRealServerInfoState	read-only	mandatory	The state of the real server.
1.3.6.1.4.1.1872.2.1.9.3	Nodeip-info
1.3.6.1.4.1.1872.2.1.9.3.1	TableipRouteInfoTable	not-accessible	mandatory	The table of run-time IP routes.
1.3.6.1.4.1.1872.2.1.9.3.1.1	RowipRouteInfoEntry	not-accessible	mandatory	A row in the run-time IP route table
1.3.6.1.4.1.1872.2.1.9.3.1.1.1	ColumnipRouteInfoIndx	read-only	mandatory	The index of this route table.
1.3.6.1.4.1.1872.2.1.9.3.1.1.2	ColumnipRouteInfoDestIp	read-only	mandatory	The destination IP address of this route.
1.3.6.1.4.1.1872.2.1.9.3.1.1.3	ColumnipRouteInfoMask	read-only	mandatory	The destination IP mask of this route.
1.3.6.1.4.1.1872.2.1.9.3.1.1.4	ColumnipRouteInfoGateway	read-only	mandatory	The next-hop router address for this route.
1.3.6.1.4.1.1872.2.1.9.3.1.1.5	ColumnipRouteInfoTag	read-only	mandatory	The tag-type for this route.
1.3.6.1.4.1.1872.2.1.9.3.1.1.6	ColumnipRouteInfoType	read-only	mandatory	The type of the route.
1.3.6.1.4.1.1872.2.1.9.3.1.1.7	ColumnipRouteInfoInterface	read-only	mandatory	The interface number for which the destination address is applicable.
1.3.6.1.4.1.1872.2.1.9.3.2	TablearpInfoTable	not-accessible	mandatory	The table of ARP entries.
1.3.6.1.4.1.1872.2.1.9.3.2.1	RowarpInfoEntry	not-accessible	mandatory	A row in the ARP table
1.3.6.1.4.1.1872.2.1.9.3.2.1.1	ColumnarpInfoDestIp	read-only	mandatory	The destination IP address of the ARP entry.
1.3.6.1.4.1.1872.2.1.9.3.2.1.2	ColumnarpInfoMacAddr	read-only	mandatory	The MAC address for the ARP entry.
1.3.6.1.4.1.1872.2.1.9.3.2.1.3	ColumnarpInfoVLAN	read-only	mandatory	The VLAN identifier for the ARP entry.
1.3.6.1.4.1.1872.2.1.9.3.2.1.4	ColumnarpInfoSrcPort	read-only	mandatory	The port number on which this entry's equivalence is effective.
1.3.6.1.4.1.1872.2.1.9.3.2.1.5	ColumnarpInfoRefPorts	read-only	mandatory	The rference ports associated with this ARP entry.
1.3.6.1.4.1.1872.2.1.9.3.2.1.6	ColumnarpInfoFlag	read-only	mandatory	The flag associated with this ARP entry.
1.3.6.1.4.1.1872.2.1.9.4	Nodevrrp-info
1.3.6.1.4.1.1872.2.1.9.4.1	TablevrrpInfoVirtRtrTable	not-accessible	mandatory	The table of VRRP virtual router run-time information.
1.3.6.1.4.1.1872.2.1.9.4.1.1	RowvrrpInfoVirtRtrTableEntry	not-accessible	mandatory	The run-time information about a VRRP virtual router.
1.3.6.1.4.1.1872.2.1.9.4.1.1.1	ColumnvrrpInfoVirtRtrIndex	read-only	mandatory	The VRRP virtual router index.
1.3.6.1.4.1.1872.2.1.9.4.1.1.2	ColumnvrrpInfoVirtRtrState	read-only	mandatory	The VRRP virtual router state.
1.3.6.1.4.1.1872.2.1.10	Nodefiltering
1.3.6.1.4.1.1872.2.1.10.1	ScalarfltCfgTableMaxSize	read-only	mandatory	The maximum number of filtering table entries.
1.3.6.1.4.1.1872.2.1.10.2	TablefltCurCfgTable	not-accessible	mandatory	The filtering table in the new configuration block.
1.3.6.1.4.1.1872.2.1.10.2.1	RowfltCurCfgTableEntry	not-accessible	mandatory	A row in the filtering table.
1.3.6.1.4.1.1872.2.1.10.2.1.1	ColumnfltCurCfgIndx	read-only	mandatory	The filtering table index.
1.3.6.1.4.1.1872.2.1.10.2.1.2	ColumnfltCurCfgSrcIp	read-only	mandatory	The source IP address to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.3	ColumnfltCurCfgSrcIpMask	read-only	mandatory	The source IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.4	ColumnfltCurCfgDstIp	read-only	mandatory	The destination IP address to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.5	ColumnfltCurCfgDstIpMask	read-only	mandatory	The destination IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.6	ColumnfltCurCfgProtocol	read-only	mandatory	The protocol to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.7	ColumnfltCurCfgRangeHighSrcPort	read-only	mandatory	The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.8	ColumnfltCurCfgRangeLowSrcPort	read-only	mandatory	The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.9	ColumnfltCurCfgRangeLowDstPort	read-only	mandatory	The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.10	ColumnfltCurCfgRangeHighDstPort	read-only	mandatory	The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.11	ColumnfltCurCfgAction	read-only	mandatory	The action for the filtering rule.
1.3.6.1.4.1.1872.2.1.10.2.1.12	ColumnfltCurCfgRedirPort	read-only	mandatory	The real server port number used for redirection.
1.3.6.1.4.1.1872.2.1.10.2.1.13	ColumnfltCurCfgRedirGroup	read-only	mandatory	The real server group to be redirected to.
1.3.6.1.4.1.1872.2.1.10.2.1.14	ColumnfltCurCfgLog	read-only	mandatory	Enable or disable logging.
1.3.6.1.4.1.1872.2.1.10.2.1.15	ColumnfltCurCfgState	read-only	mandatory	The state of this filtering rule.
1.3.6.1.4.1.1872.2.1.10.2.1.16	ColumnfltCurCfgNat	read-only	mandatory	The selection of destination or source for network address translatin.
1.3.6.1.4.1.1872.2.1.10.2.1.17	ColumnfltCurCfgCache	read-only	mandatory	Enable or disable caching sessions that match filter.
1.3.6.1.4.1.1872.2.1.10.2.1.18	ColumnfltCurCfgInvert	read-only	mandatory	Turn the invert logic on or off for the filter entry.
1.3.6.1.4.1.1872.2.1.10.2.1.19	ColumnfltCurCfgClientProxy	read-only	mandatory	Enable or disable client proxy.
1.3.6.1.4.1.1872.2.1.10.2.1.20	ColumnfltCurCfgTcpAck	read-only	mandatory	Enable or disable filtering on matching TCP ACK and RST flag.
1.3.6.1.4.1.1872.2.1.10.2.1.21	ColumnfltCurCfgUrlRedir	read-only	mandatory	Enable or disable URL redirection. The URL expressions are defined in slbCurCfgUrlTable.
1.3.6.1.4.1.1872.2.1.10.2.1.22	ColumnfltCurCfgSrcMac	read-only	mandatory	The source MAC address to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.23	ColumnfltCurCfgDstMac	read-only	mandatory	The Destination MAC address to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.24	ColumnfltCurCfgFtpNatActive	read-only	mandatory	Enable or disable FTP NAT for active ftp only.
1.3.6.1.4.1.1872.2.1.10.2.1.25	ColumnfltCurCfgAclTcpUrg	read-only	mandatory	Enable or disable TCP URG packet.
1.3.6.1.4.1.1872.2.1.10.2.1.26	ColumnfltCurCfgAclTcpAck	read-only	mandatory	Enable or disable TCP ACK packet.
1.3.6.1.4.1.1872.2.1.10.2.1.27	ColumnfltCurCfgAclTcpPsh	read-only	mandatory	Enable or disable TCP PSH packet.
1.3.6.1.4.1.1872.2.1.10.2.1.28	ColumnfltCurCfgAclTcpRst	read-only	mandatory	Enable or disable TCP RST packet.
1.3.6.1.4.1.1872.2.1.10.2.1.29	ColumnfltCurCfgAclTcpSyn	read-only	mandatory	Enable or disable TCP SYN packet.
1.3.6.1.4.1.1872.2.1.10.2.1.30	ColumnfltCurCfgAclTcpFin	read-only	mandatory	Enable or disable TCP FIN packet.
1.3.6.1.4.1.1872.2.1.10.2.1.31	ColumnfltCurCfgAclIcmp	read-only	mandatory	ICMP type to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.32	ColumnfltCurCfgAclIpOption	read-only	mandatory	Select an IP option to filter.
1.3.6.1.4.1.1872.2.1.10.2.1.33	ColumnfltCurCfgBwmContract	read-only	mandatory	Filt default BW contract number.
1.3.6.1.4.1.1872.2.1.10.2.1.34	ColumnfltCurCfgAclIpTos	read-only	mandatory	The IP TOS value to be filtered.
1.3.6.1.4.1.1872.2.1.10.2.1.35	ColumnfltCurCfgAclIpTosMask	read-only	mandatory	The IP TOS mask for filtering.
1.3.6.1.4.1.1872.2.1.10.2.1.36	ColumnfltCurCfgAclIpTosNew	read-only	mandatory	The new IP TOS value to over-write when filtering fired.
1.3.6.1.4.1.1872.2.1.10.2.1.37	ColumnfltCurCfgFwlb	read-only	mandatory	Enable or disable filtering on firewall redirect hash method.
1.3.6.1.4.1.1872.2.1.10.3	TablefltNewCfgTable	not-accessible	mandatory	The filtering table in the new configuration block.
1.3.6.1.4.1.1872.2.1.10.3.1	RowfltNewCfgTableEntry	not-accessible	mandatory	A row in the filtering table.
1.3.6.1.4.1.1872.2.1.10.3.1.1	ColumnfltNewCfgIndx	read-only	mandatory	The filtering table index.
1.3.6.1.4.1.1872.2.1.10.3.1.2	ColumnfltNewCfgSrcIp	read-write	mandatory	The source IP address to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.3	ColumnfltNewCfgSrcIpMask	read-write	mandatory	The source IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.4	ColumnfltNewCfgDstIp	read-write	mandatory	The destination IP address to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.5	ColumnfltNewCfgDstIpMask	read-write	mandatory	The destination IP sub-net mask for filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.6	ColumnfltNewCfgProtocol	read-write	mandatory	The protocol to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.7	ColumnfltNewCfgRangeHighSrcPort	read-write	mandatory	The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.8	ColumnfltNewCfgRangeLowSrcPort	read-write	mandatory	The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.9	ColumnfltNewCfgRangeLowDstPort	read-write	mandatory	The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.10	ColumnfltNewCfgRangeHighDstPort	read-write	mandatory	The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.11	ColumnfltNewCfgAction	read-write	mandatory	The action for the filtering rule.
1.3.6.1.4.1.1872.2.1.10.3.1.12	ColumnfltNewCfgRedirPort	read-write	mandatory	The real server port number used for redirection.
1.3.6.1.4.1.1872.2.1.10.3.1.13	ColumnfltNewCfgRedirGroup	read-write	mandatory	The real server group to be redirected to.
1.3.6.1.4.1.1872.2.1.10.3.1.14	ColumnfltNewCfgLog	read-write	mandatory	Enable or disable logging.
1.3.6.1.4.1.1872.2.1.10.3.1.15	ColumnfltNewCfgState	read-write	mandatory	The state of this filtering rule.
1.3.6.1.4.1.1872.2.1.10.3.1.16	ColumnfltNewCfgDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.1.10.3.1.17	ColumnfltNewCfgNat	read-write	mandatory	The selection of destination or source for network address translatin.
1.3.6.1.4.1.1872.2.1.10.3.1.18	ColumnfltNewCfgCache	read-write	mandatory	Enable or disable caching sessions that match filter.
1.3.6.1.4.1.1872.2.1.10.3.1.19	ColumnfltNewCfgInvert	read-write	mandatory	Turn the invert logic on or off for the filter entry.
1.3.6.1.4.1.1872.2.1.10.3.1.20	ColumnfltNewCfgClientProxy	read-write	mandatory	Enable or disable client proxy.
1.3.6.1.4.1.1872.2.1.10.3.1.21	ColumnfltNewCfgTcpAck	read-write	mandatory	Enable or disable filtering on matching TCP ACK and RST flag.
1.3.6.1.4.1.1872.2.1.10.3.1.22	ColumnfltNewCfgUrlRedir	read-write	mandatory	Enable or disable URL redirection. The URL expressions are defined in slbNewCfgUrlTable.
1.3.6.1.4.1.1872.2.1.10.3.1.23	ColumnfltNewCfgSrcMac	read-write	mandatory	The source MAC address to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.24	ColumnfltNewCfgDstMac	read-write	mandatory	The Destination MAC address to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.25	ColumnfltNewCfgFtpNatActive	read-write	mandatory	Enable or disable FTP NAT for active ftp.
1.3.6.1.4.1.1872.2.1.10.3.1.26	ColumnfltNewCfgAclTcpUrg	read-write	mandatory	E or disable TCP URG packet.
1.3.6.1.4.1.1872.2.1.10.3.1.27	ColumnfltNewCfgAclTcpAck	read-write	mandatory	Enable or disable TCP ACK packet.
1.3.6.1.4.1.1872.2.1.10.3.1.28	ColumnfltNewCfgAclTcpPsh	read-write	mandatory	Enable or disable TCP PSH packet.
1.3.6.1.4.1.1872.2.1.10.3.1.29	ColumnfltNewCfgAclTcpRst	read-write	mandatory	Enable or disable TCP RST packet.
1.3.6.1.4.1.1872.2.1.10.3.1.30	ColumnfltNewCfgAclTcpSyn	read-write	mandatory	Enable or disable TCP SYN packet.
1.3.6.1.4.1.1872.2.1.10.3.1.31	ColumnfltNewCfgAclTcpFin	read-write	mandatory	Enable or disable TCP FIN packet.
1.3.6.1.4.1.1872.2.1.10.3.1.32	ColumnfltNewCfgAclIcmp	read-write	mandatory	ICMP type to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.33	ColumnfltNewCfgAclIpOption	read-write	mandatory	Select an IP option to filter.
1.3.6.1.4.1.1872.2.1.10.3.1.34	ColumnfltNewCfgBwmContract	read-write	mandatory	Filt default BW contract number.
1.3.6.1.4.1.1872.2.1.10.3.1.35	ColumnfltNewCfgAclIpTos	read-write	mandatory	The IP TOS value to be filtered.
1.3.6.1.4.1.1872.2.1.10.3.1.36	ColumnfltNewCfgAclIpTosMask	read-write	mandatory	The IP TOS mask for filtering.
1.3.6.1.4.1.1872.2.1.10.3.1.37	ColumnfltNewCfgAclIpTosNew	read-write	mandatory	The new IP TOS value to over-write when filtering fired.
1.3.6.1.4.1.1872.2.1.10.3.1.38	ColumnfltNewCfgFwlb	read-write	mandatory	Enable or disable filtering on firewall redirect hash method.
1.3.6.1.4.1.1872.2.1.10.4	TablefltCurCfgPortTable	not-accessible	mandatory	The filtering port table in the current configuration block.
1.3.6.1.4.1.1872.2.1.10.4.1	RowfltCurCfgPortTableEntry	not-accessible	mandatory	A row in the filtering port table.
1.3.6.1.4.1.1872.2.1.10.4.1.1	ColumnfltCurCfgPortIndx	read-only	mandatory	The port index.
1.3.6.1.4.1.1872.2.1.10.4.1.2	ColumnfltCurCfgPortState	read-only	mandatory	Enable or disable filtering.
1.3.6.1.4.1.1872.2.1.10.4.1.3	ColumnfltCurCfgPortFiltBmap	read-only	mandatory	The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …
1.3.6.1.4.1.1872.2.1.10.5	TablefltNewCfgPortTable	not-accessible	mandatory	The filtering port table in the new configuration block.
1.3.6.1.4.1.1872.2.1.10.5.1	RowfltNewCfgPortTableEntry	not-accessible	mandatory	A row in the filtering port table.
1.3.6.1.4.1.1872.2.1.10.5.1.1	ColumnfltNewCfgPortIndx	read-only	mandatory	The port index.
1.3.6.1.4.1.1872.2.1.10.5.1.2	ColumnfltNewCfgPortState	read-write	mandatory	Enable or disable filtering.
1.3.6.1.4.1.1872.2.1.10.5.1.3	ColumnfltNewCfgPortFiltBmap	read-only	mandatory	The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …
1.3.6.1.4.1.1872.2.1.10.5.1.4	ColumnfltNewCfgPortAddFiltRule	read-write	mandatory	This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to b…
1.3.6.1.4.1.1872.2.1.10.5.1.5	ColumnfltNewCfgPortRemFiltRule	read-write	mandatory	This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule…
1.3.6.1.4.1.1872.2.1.11	NodeglobalSLB
1.3.6.1.4.1.1872.2.1.11.1	NodegslbGeneral
1.3.6.1.4.1.1872.2.1.11.1.1	ScalargslbCurCfgGenState	read-only	mandatory	Trun on or off Distributed Server Load Balance in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.2	ScalargslbNewCfgGenState	read-write	mandatory	Trun on or off Distributed Server Load Balance in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.3	ScalargslbCurCfgGenDnsHandoff	read-only	mandatory	Enable/Disable DNS handoffs in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.4	ScalargslbNewCfgGenDnsHandoff	read-write	mandatory	Enable/Disable DNS handoffs in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.5	ScalargslbCurCfgGenDnsTTL	read-only	mandatory	Time to live value in minute of DNS resource records in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.6	ScalargslbNewCfgGenDnsTTL	read-write	mandatory	Time to live value in minute of DNS resource records in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.7	ScalargslbCurCfgGenHttpRedirect	read-only	mandatory	Enable/Disable DNS handoffs in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.8	ScalargslbNewCfgGenHttpRedirect	read-write	mandatory	Enable/Disable DNS handoffs in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.9	ScalargslbCurCfgGenRemSiteUpdateInterval	read-only	mandatory	The time interval in minute for updating remote site status in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.10	ScalargslbNewCfgGenRemSiteUpdateInterval	read-write	mandatory	The time interval in minute for updating remote site status in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.11	ScalargslbCurCfgGenDnsLocalPref	read-only	mandatory	Enable/Disable DNS responses with only local addresses.
1.3.6.1.4.1.1872.2.1.11.1.12	ScalargslbNewCfgGenDnsLocalPref	read-write	mandatory	Enable/Disable DNS responses with only local addresses.
1.3.6.1.4.1.1872.2.1.11.1.13	ScalargslbCurCfgGenMinco	read-only	mandatory	Minmum number of site connections in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.14	ScalargslbNewCfgGenMinco	read-write	mandatory	Minmum number of site connections in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.15	ScalargslbCurCfgGenOne	read-only	mandatory	Enable/Disable DNS responses with only one address in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.16	ScalargslbNewCfgGenOne	read-write	mandatory	Enable/Disable DNS responses with only one address in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.17	ScalargslbCurCfgGenUsern	read-only	mandatory	Enable/Disable HTTP redirect to real server name in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.18	ScalargslbNewCfgGenUsern	read-write	mandatory	Enable/Disable HTTP redirect to real server name in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.19	ScalargslbCurCfgGenGeo	read-only	mandatory	Enable/Disable geographic awareness in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.1.20	ScalargslbNewCfgGenGeo	read-write	mandatory	Enable/Disable geographic awareness in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.2	NodegslbDNS
1.3.6.1.4.1.1872.2.1.11.2.1	ScalardnsCurCfgPrimaryIpAddr	read-only	mandatory	The DNS primary IP address in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.2.2	ScalardnsNewCfgPrimaryIpAddr	read-write	mandatory	The DNS primary IP address in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.2.3	ScalardnsCurCfgSecondaryIpAddr	read-only	mandatory	The DNS primary IP address in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.2.4	ScalardnsNewCfgSecondaryIpAddr	read-write	mandatory	The DNS primary IP address in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.2.5	ScalardnsCurCfgDomainName	read-only	mandatory	The DNS doamin name in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.2.6	ScalardnsNewCfgDomainName	read-write	mandatory	The DNS doamin name in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.3	NodegslbSites
1.3.6.1.4.1.1872.2.1.11.3.1	ScalargslbRemSiteTableMaxSize	read-only	mandatory	The maximum number of GSLB remote sites.
1.3.6.1.4.1.1872.2.1.11.3.2	TablegslbCurCfgRemSiteTable	not-accessible	mandatory	The GSLB remote sites table in the current configuration block.
1.3.6.1.4.1.1872.2.1.11.3.2.1	RowgslbCurCfgRemSiteTableEntry	not-accessible	mandatory	A row in the GSLB remote sites table.
1.3.6.1.4.1.1872.2.1.11.3.2.1.1	ColumngslbCurCfgRemSiteIndx	read-only	mandatory	The GSLB remote sites table index.
1.3.6.1.4.1.1872.2.1.11.3.2.1.2	ColumngslbCurCfgRemSitePrimaryIp	read-only	mandatory	The primary IP address of the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.2.1.3	ColumngslbCurCfgRemSiteSecondaryIp	read-only	mandatory	The secondary IP address of the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.2.1.4	ColumngslbCurCfgRemSiteState	read-only	mandatory	Enable/Disable GSLB for the remote site in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.2.1.5	ColumngslbCurCfgRemSiteUpdate	read-only	mandatory	Enable/Disable GSLB for the remote site status update in the current_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.3	TablegslbNewCfgRemSiteTable	not-accessible	mandatory	The GSLB remote sites table in the current configuration block.
1.3.6.1.4.1.1872.2.1.11.3.3.1	RowgslbNewCfgRemSiteTableEntry	not-accessible	mandatory	A row in the GSLB remote sites table.
1.3.6.1.4.1.1872.2.1.11.3.3.1.1	ColumngslbNewCfgRemSiteIndx	read-only	mandatory	The GSLB remote sites table index.
1.3.6.1.4.1.1872.2.1.11.3.3.1.2	ColumngslbNewCfgRemSitePrimaryIp	read-write	mandatory	The primary IP address of the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.3.1.3	ColumngslbNewCfgRemSiteSecondaryIp	read-write	mandatory	The secondary IP address of the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.3.1.4	ColumngslbNewCfgRemSiteState	read-write	mandatory	Enable/Disable GSLB for the remote site in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.3.3.1.5	ColumngslbNewCfgRemSiteUpdate	read-write	mandatory	Enable/Disable GSLB for the remote site status update in the new_configuration block.
1.3.6.1.4.1.1872.2.1.11.4	NodegslbLookup
1.3.6.1.4.1.1872.2.1.11.4.1	ScalargslbCurCfgGenLookups	read-only	mandatory	Enable or disable network preference lookups.
1.3.6.1.4.1.1872.2.1.11.4.2	ScalargslbNewCfgGenLookups	read-write	mandatory	Enable or disable network preference lookups.
1.3.6.1.4.1.1872.2.1.11.4.3	ScalargslbCurCfgGenLookupDname	read-only	mandatory	Domain name for internal lookup table
1.3.6.1.4.1.1872.2.1.11.4.4	ScalargslbNewCfgGenLookupDname	read-write	mandatory	Domain name for internal lookup table
1.3.6.1.4.1.1872.2.1.11.4.5	NodegslbNetwork
1.3.6.1.4.1.1872.2.1.11.4.5.1	ScalargslbNetworkTableMaxSize	read-only	mandatory	The maximum number of GSLB Internet network preference entries.
1.3.6.1.4.1.1872.2.1.11.4.5.2	TablegslbCurCfgNetworkTable	not-accessible	mandatory	The table of Internet network preference configuration in the current_config.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1	RowgslbCurCfgNetworkTableEntry	not-accessible	mandatory	The table about a network preference entry configuration.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1.1	ColumngslbCurCfgNetworkIndx	read-only	mandatory	The current Internet network preference table index.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1.2	ColumngslbCurCfgNetworkSourceIp	read-only	mandatory	The Source IP address of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1.3	ColumngslbCurCfgNetworkNetMask	read-only	mandatory	The Net mask of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1.4	ColumngslbCurCfgNetworkVip1	read-only	mandatory	The Vip1 of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.2.1.5	ColumngslbCurCfgNetworkVip2	read-only	mandatory	The Vip2 of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.3	TablegslbNewCfgNetworkTable	not-accessible	mandatory	The table of Internet network preference configuration in the new_config.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1	RowgslbNewCfgNetworkTableEntry	not-accessible	mandatory	The table about a network preference entry configuration.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.1	ColumngslbNewCfgNetworkIndx	read-only	mandatory	The new Internet network preference table index.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.2	ColumngslbNewCfgNetworkSourceIp	read-write	mandatory	The Source IP address of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.3	ColumngslbNewCfgNetworkNetMask	read-write	mandatory	The Net mask of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.4	ColumngslbNewCfgNetworkVip1	read-write	mandatory	The Vip1 of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.5	ColumngslbNewCfgNetworkVip2	read-write	mandatory	The Vip2 of the network table.
1.3.6.1.4.1.1872.2.1.11.4.5.3.1.12	ColumngslbNewCfgNetworkDelete	read-write	mandatory	By setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.1872.2.1.11.4.6	ScalargslbCurCfgGenExternal	read-only	mandatory	Enable or disable external lookups.
1.3.6.1.4.1.1872.2.1.11.4.7	ScalargslbNewCfgGenExternal	read-write	mandatory	Enable or disable external lookups.
1.3.6.1.4.1.1872.2.1.11.4.8	ScalargslbCurCfgGenEip	read-only	mandatory	External lookup IP address
1.3.6.1.4.1.1872.2.1.11.4.9	ScalargslbNewCfgGenEip	read-write	mandatory	External lookup IP address
1.3.6.1.4.1.1872.2.1.11.4.10	ScalargslbCurCfgGenLookupPort	read-only	mandatory	External lookup UDP port number
1.3.6.1.4.1.1872.2.1.11.4.11	ScalargslbNewCfgGenLookupPort	read-write	mandatory	External lookup UDP port number
1.3.6.1.4.1.1872.2.1.11.4.12	ScalargslbCurCfgGenLookupTimeout	read-only	mandatory	External lookup Timeout Interval
1.3.6.1.4.1.1872.2.1.11.4.13	ScalargslbNewCfgGenLookupTimeout	read-write	mandatory	External lookup Timeout Interval
1.3.6.1.4.1.1872.2.1.12	NodedynamicSLB
1.3.6.1.4.1.1872.2.1.12.1	TabledynSLBRealServerTable	not-accessible	mandatory	The table of Real Servers.
1.3.6.1.4.1.1872.2.1.12.1.1	RowdynSLBRealServerEntry	not-accessible	mandatory	A row in the Real Server table.
1.3.6.1.4.1.1872.2.1.12.1.1.1	ColumndynSLBRealServerIpAddr	read-only	mandatory	IP address of the Real Server.
1.3.6.1.4.1.1872.2.1.12.1.1.2	ColumndynSLBRealServerPortNum	read-only	mandatory	The switch port that the Real Server is connected to.
1.3.6.1.4.1.1872.2.1.12.1.1.3	ColumndynSLBRealServerWeight	read-write	mandatory	The Real Server weight. The higher the server weight means the Real Server is allowed to receive more traffic load.
1.3.6.1.4.1.1872.2.1.13	NodealtswitchTraps
1.3.6.1.4.1.1872.2.1.14	NodeoperCmds
1.3.6.1.4.1.1872.2.1.14.1	TableoperSlbPortTable	not-accessible	mandatory	The table of ports that the Oper commands apply to.
1.3.6.1.4.1.1872.2.1.14.1.1	RowoperSlbPortEntry	not-accessible	mandatory	A row in the operSlbPortTable
1.3.6.1.4.1.1872.2.1.14.1.1.1	ColumnoperSlbPortIndex	read-only	mandatory	The switch port number.
1.3.6.1.4.1.1872.2.1.14.1.1.2	ColumnoperSlbPortClrSessionTab	read-only	mandatory	This an action object to clear session buinding table for the specified port. ok(1) is returned when read.
1.3.6.1.4.1.1872.2.1.15	Nodevrrp
1.3.6.1.4.1.1872.2.1.15.1	NodevrrpGeneral
1.3.6.1.4.1.1872.2.1.15.1.1	ScalarvrrpCurCfgGenState	read-only	mandatory	Enable or disable VRRP operation globally.
1.3.6.1.4.1.1872.2.1.15.1.2	ScalarvrrpNewCfgGenState	read-write	mandatory	Enable or disable VRRP operation globally.
1.3.6.1.4.1.1872.2.1.15.1.3	ScalarvrrpCurCfgGenTckVirtRtrInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
1.3.6.1.4.1.1872.2.1.15.1.4	ScalarvrrpNewCfgGenTckVirtRtrInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
1.3.6.1.4.1.1872.2.1.15.1.5	ScalarvrrpCurCfgGenTckIpIntfInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
1.3.6.1.4.1.1872.2.1.15.1.6	ScalarvrrpNewCfgGenTckIpIntfInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
1.3.6.1.4.1.1872.2.1.15.1.7	ScalarvrrpCurCfgGenTckVlanPortInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.1872.2.1.15.1.8	ScalarvrrpNewCfgGenTckVlanPortInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.1872.2.1.15.1.9	ScalarvrrpCurCfgGenTckL4PortInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as…
1.3.6.1.4.1.1872.2.1.15.1.10	ScalarvrrpNewCfgGenTckL4PortInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as…
1.3.6.1.4.1.1872.2.1.15.1.11	ScalarvrrpCurCfgGenTckRServerInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a…
1.3.6.1.4.1.1872.2.1.15.1.12	ScalarvrrpNewCfgGenTckRServerInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a…
1.3.6.1.4.1.1872.2.1.15.1.13	ScalarvrrpCurCfgGenTckHsrpInc	read-only	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
1.3.6.1.4.1.1872.2.1.15.1.14	ScalarvrrpNewCfgGenTckHsrpInc	read-write	mandatory	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
1.3.6.1.4.1.1872.2.1.15.1.15	ScalarvrrpCurCfgGenHotstandby	read-only	mandatory	Enable or disable hotstandby processing.
1.3.6.1.4.1.1872.2.1.15.1.16	ScalarvrrpNewCfgGenHotstandby	read-write	mandatory	Enable or disable hotstandby processing.
1.3.6.1.4.1.1872.2.1.15.2	TablevrrpCurCfgVirtRtrTable	not-accessible	mandatory	The table of VRRP virtual routers configuration in current_config.
1.3.6.1.4.1.1872.2.1.15.2.1	RowvrrpCurCfgVirtRtrTableEntry	not-accessible	mandatory	Information about a VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.2.1.1	ColumnvrrpCurCfgVirtRtrIndx	read-only	mandatory	The VRRP virtual router table index.
1.3.6.1.4.1.1872.2.1.15.2.1.2	ColumnvrrpCurCfgVirtRtrID	read-only	mandatory	The VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.1.15.2.1.3	ColumnvrrpCurCfgVirtRtrAddr	read-only	mandatory	The VRRP virtual router IP address.
1.3.6.1.4.1.1872.2.1.15.2.1.4	ColumnvrrpCurCfgVirtRtrIfIndex	read-only	mandatory	The IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.1.15.2.1.5	ColumnvrrpCurCfgVirtRtrInterval	read-only	mandatory	The time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.1.15.2.1.6	ColumnvrrpCurCfgVirtRtrPriority	read-only	mandatory	The priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.1.15.2.1.7	ColumnvrrpCurCfgVirtRtrPreempt	read-only	mandatory	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.1.15.2.1.8	ColumnvrrpCurCfgVirtRtrState	read-only	mandatory	Enable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.2.1.9	ColumnvrrpCurCfgVirtRtrSharing	read-only	mandatory	Enable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.1.15.2.1.10	ColumnvrrpCurCfgVirtRtrTckVirtRtr	read-only	mandatory	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.1.15.2.1.11	ColumnvrrpCurCfgVirtRtrTckIpIntf	read-only	mandatory	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.1.15.2.1.12	ColumnvrrpCurCfgVirtRtrTckVlanPort	read-only	mandatory	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.1.15.2.1.13	ColumnvrrpCurCfgVirtRtrTckL4Port	read-only	mandatory	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.2.1.14	ColumnvrrpCurCfgVirtRtrTckRServer	read-only	mandatory	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.2.1.15	ColumnvrrpCurCfgVirtRtrTckHsrp	read-only	mandatory	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.1.15.3	TablevrrpNewCfgVirtRtrTable	not-accessible	mandatory	The table of VRRP virtual routers configuration in current_config.
1.3.6.1.4.1.1872.2.1.15.3.1	RowvrrpNewCfgVirtRtrTableEntry	not-accessible	mandatory	Information about a VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.3.1.1	ColumnvrrpNewCfgVirtRtrIndx	read-only	mandatory	The VRRP virtual router table index.
1.3.6.1.4.1.1872.2.1.15.3.1.2	ColumnvrrpNewCfgVirtRtrID	read-write	mandatory	The VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.1.15.3.1.3	ColumnvrrpNewCfgVirtRtrAddr	read-write	mandatory	The VRRP virtual router IP address.
1.3.6.1.4.1.1872.2.1.15.3.1.4	ColumnvrrpNewCfgVirtRtrIfIndex	read-write	mandatory	The IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.1.15.3.1.5	ColumnvrrpNewCfgVirtRtrInterval	read-write	mandatory	The time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.1.15.3.1.6	ColumnvrrpNewCfgVirtRtrPriority	read-write	mandatory	The priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.3.1.7	ColumnvrrpNewCfgVirtRtrPreempt	read-write	mandatory	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.1.15.3.1.8	ColumnvrrpNewCfgVirtRtrState	read-write	mandatory	Enable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.3.1.9	ColumnvrrpNewCfgVirtRtrDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.1.15.3.1.10	ColumnvrrpNewCfgVirtRtrSharing	read-write	mandatory	Enable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.1.15.3.1.11	ColumnvrrpNewCfgVirtRtrTckVirtRtr	read-write	mandatory	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.1.15.3.1.12	ColumnvrrpNewCfgVirtRtrTckIpIntf	read-write	mandatory	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.1.15.3.1.13	ColumnvrrpNewCfgVirtRtrTckVlanPort	read-write	mandatory	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.1.15.3.1.14	ColumnvrrpNewCfgVirtRtrTckL4Port	read-write	mandatory	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.3.1.15	ColumnvrrpNewCfgVirtRtrTckRServer	read-write	mandatory	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.3.1.16	ColumnvrrpNewCfgVirtRtrTckHsrp	read-write	mandatory	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.1.15.4	TablevrrpCurCfgIfTable	not-accessible	mandatory	The table of VRRP interface configuration in current_config.
1.3.6.1.4.1.1872.2.1.15.4.1	RowvrrpCurCfgIfTableEntry	not-accessible	mandatory	Information about a VRRP interface.
1.3.6.1.4.1.1872.2.1.15.4.1.1	ColumnvrrpCurCfgIfIndx	read-only	mandatory	The VRRP interface index. This is eqivalent to IfIndex.
1.3.6.1.4.1.1872.2.1.15.4.1.2	ColumnvrrpCurCfgIfAuthType	read-only	mandatory	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
1.3.6.1.4.1.1872.2.1.15.4.1.3	ColumnvrrpCurCfgIfPasswd	read-only	mandatory	The password for authentication.
1.3.6.1.4.1.1872.2.1.15.5	TablevrrpNewCfgIfTable	not-accessible	mandatory	The table of VRRP interface configuration in current_config.
1.3.6.1.4.1.1872.2.1.15.5.1	RowvrrpNewCfgIfTableEntry	not-accessible	mandatory	Information about a VRRP interface.
1.3.6.1.4.1.1872.2.1.15.5.1.1	ColumnvrrpNewCfgIfIndx	read-only	mandatory	The VRRP interface index. This is eqivalent to IfIndex.
1.3.6.1.4.1.1872.2.1.15.5.1.2	ColumnvrrpNewCfgIfAuthType	read-write	mandatory	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
1.3.6.1.4.1.1872.2.1.15.5.1.3	ColumnvrrpNewCfgIfPasswd	read-write	mandatory	The password for authentication.
1.3.6.1.4.1.1872.2.1.15.5.1.4	ColumnvrrpNewCfgIfDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.1.15.6	TablevrrpCurCfgVirtRtrGrpTable	not-accessible	mandatory	The table of VRRP virtual router group configuration in current_config.
1.3.6.1.4.1.1872.2.1.15.6.1	RowvrrpCurCfgVirtRtrGrpTableEntry	not-accessible	mandatory	Information about a VRRP failover virtual router.
1.3.6.1.4.1.1872.2.1.15.6.1.1	ColumnvrrpCurCfgVirtRtrGrpIndx	read-only	mandatory	The VRRP virtual router table index.
1.3.6.1.4.1.1872.2.1.15.6.1.2	ColumnvrrpCurCfgVirtRtrGrpID	read-only	mandatory	The VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.1.15.6.1.3	ColumnvrrpCurCfgVirtRtrGrpIfIndex	read-only	mandatory	The IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.1.15.6.1.4	ColumnvrrpCurCfgVirtRtrGrpInterval	read-only	mandatory	The time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.1.15.6.1.5	ColumnvrrpCurCfgVirtRtrGrpPriority	read-only	mandatory	The priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.1872.2.1.15.6.1.6	ColumnvrrpCurCfgVirtRtrGrpPreempt	read-only	mandatory	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.1.15.6.1.7	ColumnvrrpCurCfgVirtRtrGrpState	read-only	mandatory	Enable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.6.1.8	ColumnvrrpCurCfgVirtRtrGrpSharing	read-only	mandatory	Enable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.1.15.6.1.9	ColumnvrrpCurCfgVirtRtrGrpTckVirtRtr	read-only	mandatory	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.1.15.6.1.10	ColumnvrrpCurCfgVirtRtrGrpTckIpIntf	read-only	mandatory	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.1.15.6.1.11	ColumnvrrpCurCfgVirtRtrGrpTckVlanPort	read-only	mandatory	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.1.15.6.1.12	ColumnvrrpCurCfgVirtRtrGrpTckL4Port	read-only	mandatory	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.6.1.13	ColumnvrrpCurCfgVirtRtrGrpTckRServer	read-only	mandatory	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.6.1.14	ColumnvrrpCurCfgVirtRtrGrpTckHsrp	read-only	mandatory	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.1.15.7	TablevrrpNewCfgVirtRtrGrpTable	not-accessible	mandatory	The table of VRRP virtual router group configuration in new_config.
1.3.6.1.4.1.1872.2.1.15.7.1	RowvrrpNewCfgVirtRtrGrpTableEntry	not-accessible	mandatory	Information about a VRRP failover virtual router.
1.3.6.1.4.1.1872.2.1.15.7.1.1	ColumnvrrpNewCfgVirtRtrGrpIndx	read-only	mandatory	The VRRP virtual router table index.
1.3.6.1.4.1.1872.2.1.15.7.1.2	ColumnvrrpNewCfgVirtRtrGrpID	read-write	mandatory	The VRRP virtual router identifier.
1.3.6.1.4.1.1872.2.1.15.7.1.3	ColumnvrrpNewCfgVirtRtrGrpIfIndex	read-write	mandatory	The IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.1872.2.1.15.7.1.4	ColumnvrrpNewCfgVirtRtrGrpInterval	read-write	mandatory	The time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.1872.2.1.15.7.1.5	ColumnvrrpNewCfgVirtRtrGrpPriority	read-write	mandatory	The priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.7.1.6	ColumnvrrpNewCfgVirtRtrGrpPreempt	read-write	mandatory	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.1872.2.1.15.7.1.7	ColumnvrrpNewCfgVirtRtrGrpState	read-write	mandatory	Enable or disable the VRRP virtual router.
1.3.6.1.4.1.1872.2.1.15.7.1.8	ColumnvrrpNewCfgVirtRtrGrpDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.1872.2.1.15.7.1.9	ColumnvrrpNewCfgVirtRtrGrpSharing	read-write	mandatory	Enable or disable load sharing of non-master virtual router.
1.3.6.1.4.1.1872.2.1.15.7.1.10	ColumnvrrpNewCfgVirtRtrGrpTckVirtRtr	read-write	mandatory	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
1.3.6.1.4.1.1872.2.1.15.7.1.11	ColumnvrrpNewCfgVirtRtrGrpTckIpIntf	read-write	mandatory	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.1872.2.1.15.7.1.12	ColumnvrrpNewCfgVirtRtrGrpTckVlanPort	read-write	mandatory	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.1872.2.1.15.7.1.13	ColumnvrrpNewCfgVirtRtrGrpTckL4Port	read-write	mandatory	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.7.1.14	ColumnvrrpNewCfgVirtRtrGrpTckRServer	read-write	mandatory	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when vi…
1.3.6.1.4.1.1872.2.1.15.7.1.15	ColumnvrrpNewCfgVirtRtrGrpTckHsrp	read-write	mandatory	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virt…
1.3.6.1.4.1.1872.2.1.16	Noderadius
1.3.6.1.4.1.1872.2.1.16.1	ScalarradCurCfgPrimaryIpAddr	read-only	mandatory	The IP address of the Primary RADIUS server.
1.3.6.1.4.1.1872.2.1.16.2	ScalarradNewCfgPrimaryIpAddr	read-write	mandatory	The IP address of the Primary RADIUS server.
1.3.6.1.4.1.1872.2.1.16.3	ScalarradCurCfgSecondaryIpAddr	read-only	mandatory	The IP address of the Secondary RADIUS server.
1.3.6.1.4.1.1872.2.1.16.4	ScalarradNewCfgSecondaryIpAddr	read-write	mandatory	The IP address of the Secondary RADIUS server.
1.3.6.1.4.1.1872.2.1.16.5	ScalarradCurCfgPort	read-only	mandatory	Specify the RADIUS port number.
1.3.6.1.4.1.1872.2.1.16.6	ScalarradNewCfgPort	read-write	mandatory	Speicfy the RADIUS port number.
1.3.6.1.4.1.1872.2.1.16.7	ScalarradCurCfgTimeout	read-only	mandatory	The maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.1872.2.1.16.8	ScalarradNewCfgTimeout	read-write	mandatory	The maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.1872.2.1.16.9	ScalarradCurCfgRetries	read-only	mandatory	Number of retries to the RADIUS server.
1.3.6.1.4.1.1872.2.1.16.10	ScalarradNewCfgRetries	read-write	mandatory	Number of retries to the RADIUS server.
1.3.6.1.4.1.1872.2.1.16.11	ScalarradCurCfgState	read-only	mandatory	Enable or disbale RADIUS authentication.
1.3.6.1.4.1.1872.2.1.16.12	ScalarradNewCfgState	read-write	mandatory	Enable or disable RADIUS authentication.
1.3.6.1.4.1.1872.2.1.16.13	ScalarradCurCfgAuthenString	read-only	mandatory	The RADIUS authentication string.
1.3.6.1.4.1.1872.2.1.16.14	ScalarradNewCfgAuthenString	read-write	mandatory	The RADIUS authentication string.
1.3.6.1.4.1.1872.2.1.17	Nodebwm
1.3.6.1.4.1.1872.2.1.17.1	NodebwmGeneralConfig
1.3.6.1.4.1.1872.2.1.17.1.1	ScalarbwmCurCfgGenState	read-only	mandatory	The state of BWM in the current configuration block.
1.3.6.1.4.1.1872.2.1.17.1.2	ScalarbwmNewCfgGenState	read-write	mandatory	The state of BWM in the new configuration block.
1.3.6.1.4.1.1872.2.1.17.1.3	ScalarbwmCurCfgGenEnforcePolicy	read-only	mandatory	The state of BWM enforce policy in the current configuration block.
1.3.6.1.4.1.1872.2.1.17.1.4	ScalarbwmNewCfgGenEnforcePolicy	read-write	mandatory	The state of BWM enforce policy in the new configuration block.
1.3.6.1.4.1.1872.2.1.17.1.5	ScalarbwmCurCfgGenSmtpUser	read-only	mandatory	The SMTP user name for BWM in the current configuration block.
1.3.6.1.4.1.1872.2.1.17.1.6	ScalarbwmNewCfgGenSmtpUser	read-write	mandatory	The SMTP user name for BWM in the new configuration block.
1.3.6.1.4.1.1872.2.1.17.2	NodebwmPolicyConfig
1.3.6.1.4.1.1872.2.1.17.2.1	ScalarbwmPolicyTableMaxEnt	read-only	mandatory	The maximum number of rows in the BWM policy configuration table.
1.3.6.1.4.1.1872.2.1.17.2.2	TablebwmCurCfgPolicyTable	not-accessible	mandatory	The table of BWM traffic policy configuration in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.2.2.1	RowbwmCurCfgPolicyTableEntry	not-accessible	mandatory	A row in the BWM traffic policy configuration table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.2.2.1.1	ColumnbwmCurCfgPolicyIndx	read-only	mandatory	The index of the row in BWM traffic policy configurations table.
1.3.6.1.4.1.1872.2.1.17.2.2.1.2	ColumnbwmCurCfgPolicyTosIn	read-only	mandatory	This is IP TOS in the profile state of the traffic policy
1.3.6.1.4.1.1872.2.1.17.2.2.1.3	ColumnbwmCurCfgPolicyTosOut	read-only	mandatory	This is IP TOS out of profile state of the traffic policy
1.3.6.1.4.1.1872.2.1.17.2.2.1.4	ColumnbwmCurCfgPolicyHard	read-only	mandatory	The hard speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.2.1.5	ColumnbwmCurCfgPolicySoft	read-only	mandatory	The soft speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.2.1.6	ColumnbwmCurCfgPolicyResv	read-only	mandatory	The reservation speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.2.1.7	ColumnbwmCurCfgPolicyBuffer	read-only	mandatory	The buffer limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.3	TablebwmNewCfgPolicyTable	not-accessible	mandatory	The table of BWM traffi policy configuration in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.2.3.1	RowbwmNewCfgPolicyTableEntry	not-accessible	mandatory	A row in the BWM traffic policy configuration table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.2.3.1.1	ColumnbwmNewCfgPolicyIndx	read-only	mandatory	The index of the row in BWM traffic policy configurations table.
1.3.6.1.4.1.1872.2.1.17.2.3.1.2	ColumnbwmNewCfgPolicyTosIn	read-write	mandatory	This is IP TOS in the profile state of the traffic policy
1.3.6.1.4.1.1872.2.1.17.2.3.1.3	ColumnbwmNewCfgPolicyTosOut	read-write	mandatory	This is IP TOS out of profile state of the traffic policy
1.3.6.1.4.1.1872.2.1.17.2.3.1.4	ColumnbwmNewCfgPolicyHard	read-write	mandatory	The hard speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.3.1.5	ColumnbwmNewCfgPolicySoft	read-write	mandatory	The soft speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.3.1.6	ColumnbwmNewCfgPolicyResv	read-write	mandatory	The reservation speed limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.2.3.1.7	ColumnbwmNewCfgPolicyBuffer	read-write	mandatory	The buffer limit for the traffic policy.
1.3.6.1.4.1.1872.2.1.17.3	NodebwmContractConfig
1.3.6.1.4.1.1872.2.1.17.3.1	ScalarbwmContractTableMaxEnt	read-only	mandatory	The maximum number of rows in the BWM contract configuration table.
1.3.6.1.4.1.1872.2.1.17.3.2	TablebwmCurCfgContractTable	not-accessible	mandatory	The table of BWM traffic contract configuration in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.3.2.1	RowbwmCurCfgContractTableEntry	not-accessible	mandatory	A row in the BWM traffic contract configuration table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.3.2.1.1	ColumnbwmCurCfgContractIndx	read-only	mandatory	The index of the row in BWM traffic contract configurations table.
1.3.6.1.4.1.1872.2.1.17.3.2.1.2	ColumnbwmCurCfgContractName	read-only	mandatory	The traffic contract name.
1.3.6.1.4.1.1872.2.1.17.3.2.1.3	ColumnbwmCurCfgContractState	read-only	mandatory	This is the state of the traffic contract.
1.3.6.1.4.1.1872.2.1.17.3.2.1.4	ColumnbwmCurCfgContractPolicy	read-only	mandatory	This is policy number of the traffic contract
1.3.6.1.4.1.1872.2.1.17.3.2.1.5	ColumnbwmCurCfgContractPrec	read-only	mandatory	The precedence value of the traffic contract
1.3.6.1.4.1.1872.2.1.17.3.2.1.6	ColumnbwmCurCfgContractUseTos	read-only	mandatory	Enable/disable the TOS overwrite of the traffic contract.
1.3.6.1.4.1.1872.2.1.17.3.2.1.7	ColumnbwmCurCfgContractHistory	read-only	mandatory	Enable/disable save contract statistics on the TFTP server of the traffic contract.
1.3.6.1.4.1.1872.2.1.17.3.3	TablebwmNewCfgContractTable	not-accessible	mandatory	The table of BWM traffic contract configuration in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.3.3.1	RowbwmNewCfgContractTableEntry	not-accessible	mandatory	A row in the BWM traffic contract configuration table in the current_configuration block.
1.3.6.1.4.1.1872.2.1.17.3.3.1.1	ColumnbwmNewCfgContractIndx	read-only	mandatory	The index of the row in BWM traffic contract configurations table.
1.3.6.1.4.1.1872.2.1.17.3.3.1.2	ColumnbwmNewCfgContractName	read-write	mandatory	The traffic contract name.
1.3.6.1.4.1.1872.2.1.17.3.3.1.3	ColumnbwmNewCfgContractState	read-write	mandatory	This is the state of the traffic contract.
1.3.6.1.4.1.1872.2.1.17.3.3.1.4	ColumnbwmNewCfgContractPolicy	read-write	mandatory	This is policy number of the traffic contract
1.3.6.1.4.1.1872.2.1.17.3.3.1.5	ColumnbwmNewCfgContractDelete	read-write	mandatory	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.1872.2.1.17.3.3.1.6	ColumnbwmNewCfgContractPrec	read-write	mandatory	The precedence value of the traffic contract
1.3.6.1.4.1.1872.2.1.17.3.3.1.7	ColumnbwmNewCfgContractUseTos	read-write	mandatory	Enable/disable the TOS overwrite of the traffic contract.
1.3.6.1.4.1.1872.2.1.17.3.3.1.8	ColumnbwmNewCfgContractHistory	read-write	mandatory	Enable/disable save contract statistics on the TFTP server of the traffic contract.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

ALTEON-PRIVATE-MIBS

Bulk Translate

Search Vendor MIBs

Search Vendor Traps