AMIMEGARAIDMIF-MIB
123 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16 | Nodeami | |||
| 1.3.6.1.4.1.16.1 | Nodemegaraid | |||
| 1.3.6.1.4.1.16.1.2 | Nodemifmib | |||
| 1.3.6.1.4.1.16.1.2.1 | NodedmtfGroups | |||
| 1.3.6.1.4.1.16.1.2.1.1 | TabletComponentid | not-accessible | mandatory | This group defines attributes common to all components. |
| 1.3.6.1.4.1.16.1.2.1.1.1 | RoweComponentid | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.1.1.1 | Columna1Manufacturer | read-only | mandatory | The name of the manufacturer that produced this component. |
| 1.3.6.1.4.1.16.1.2.1.1.1.2 | Columna1Product | read-only | mandatory | The name of the component. |
| 1.3.6.1.4.1.16.1.2.1.1.1.3 | Columna1Version | read-only | mandatory | The version for the component. |
| 1.3.6.1.4.1.16.1.2.1.1.1.4 | Columna1SerialNumber | read-only | mandatory | The serial number for this instance of this component. |
| 1.3.6.1.4.1.16.1.2.1.1.1.5 | Columna1Installation | read-only | mandatory | The time & date of the lastest installation of this component. |
| 1.3.6.1.4.1.16.1.2.1.1.1.6 | Columna1Verify | read-only | mandatory | A code that provides a level of verification that the component is still installed and working. |
| 1.3.6.1.4.1.16.1.2.1.2 | TabletControllerInformation | not-accessible | mandatory | This group contains Megaraid common information |
| 1.3.6.1.4.1.16.1.2.1.2.1 | RoweControllerInformation | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.2.1.1 | Columna2Adpadapternumber | read-only | mandatory | The adapter number for this instance of adapter object |
| 1.3.6.1.4.1.16.1.2.1.2.1.2 | Columna2Firmwareversion | read-only | mandatory | The firmware version of this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.3 | Columna2Biosversion | read-only | mandatory | The bios version of this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.4 | Columna2Numlogicaldrives | read-only | mandatory | The number of logical drives attatched to this controller. |
| 1.3.6.1.4.1.16.1.2.1.2.1.5 | Columna2Dramsizeinmb | read-only | mandatory | Amount of DRAM in MB present on this adapter |
| 1.3.6.1.4.1.16.1.2.1.2.1.6 | Columna2Chipsettype | read-only | mandatory | Motherboard Chipset Type for which the Adapter ASIC is Configure . |
| 1.3.6.1.4.1.16.1.2.1.2.1.7 | Columna2Rebuildrateinpercent | read-write | mandatory | Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-Write Operations. |
| 1.3.6.1.4.1.16.1.2.1.2.1.8 | Columna2Flushinterval | read-write | mandatory | Internal Cache Flush Interval for Logical Drives in WriteBack Mode. |
| 1.3.6.1.4.1.16.1.2.1.2.1.9 | Columna2Maxconcurrentcmds | read-only | mandatory | Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.10 | Columna2Spinupdelay | read-only | mandatory | This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the numb… |
| 1.3.6.1.4.1.16.1.2.1.2.1.11 | Columna2Spinupcount | read-only | mandatory | This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the numb… |
| 1.3.6.1.4.1.16.1.2.1.2.1.12 | Columna2Adpioreadspersec | read-only | mandatory | Number of IO Reads/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.13 | Columna2Adpiowritespersec | read-only | mandatory | Number of IO writes/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.14 | Columna2Adpreadkbspersec | read-only | mandatory | Amount of Data Transferred in KBs/sec due to READ Transfers. |
| 1.3.6.1.4.1.16.1.2.1.2.1.15 | Columna2Adpwritekbspersec | read-only | mandatory | Amount of Data Transferred in KBs/sec due to Write Transfers. |
| 1.3.6.1.4.1.16.1.2.1.2.1.16 | Columna2Adpreadfailurespersec | read-only | mandatory | Number of Read-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.17 | Columna2Adpwritefailurespersec | read-only | mandatory | Number of write-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.2.1.2.1.18 | Columna2Scanchannels | read-write | mandatory | Use this Variable to Discover the Non-Disk Devices attached to the Adapter. Set this Variable to startscan (an integer value of 2) to start the Channel Scannin… |
| 1.3.6.1.4.1.16.1.2.1.2.1.19 | Columna2Logicalview | read-only | mandatory | logical drive status for this adpater |
| 1.3.6.1.4.1.16.1.2.1.2.1.20 | Columna2Physicalview | read-only | mandatory | logical drive status for this adpater |
| 1.3.6.1.4.1.16.1.2.1.3 | TabletLogicalDriveInformation | not-accessible | mandatory | This group contains Logical Drive common information |
| 1.3.6.1.4.1.16.1.2.1.3.1 | RoweLogicalDriveInformation | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.1 | Columna3Ldadapternumber | read-only | mandatory | The adapter number for this instance of adpter/logical drive. |
| 1.3.6.1.4.1.16.1.2.1.3.1.2 | Columna3Logicaldrivenumber | read-only | mandatory | The logical drive number. |
| 1.3.6.1.4.1.16.1.2.1.3.1.3 | Columna3Raidlevel | read-only | mandatory | The Raid level of this logical drive. |
| 1.3.6.1.4.1.16.1.2.1.3.1.4 | Columna3Status | read-write | mandatory | The current status of this Logical drive. |
| 1.3.6.1.4.1.16.1.2.1.3.1.5 | Columna3Sizeinmb | read-only | mandatory | The Configured size of this logical drive(in MB). |
| 1.3.6.1.4.1.16.1.2.1.3.1.6 | Columna3Stripesize | read-only | mandatory | The Configured stripe size of this logical drive(in MB). |
| 1.3.6.1.4.1.16.1.2.1.3.1.7 | Columna3Readpolicy | read-write | mandatory | The readpolicy logical drive(in MB). |
| 1.3.6.1.4.1.16.1.2.1.3.1.8 | Columna3Writepolicy | read-write | mandatory | The write policy logical drive(in MB). |
| 1.3.6.1.4.1.16.1.2.1.3.1.9 | Columna3Cachepolicy | read-write | mandatory | The cache policy logical drive(in MB). |
| 1.3.6.1.4.1.16.1.2.1.3.1.10 | Columna3Numberofspans | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.11 | Columna3Numberofstripes | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.12 | Columna3Ldioreadspersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.13 | Columna3Ldiowritespersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.14 | Columna3Ldreadskbspersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.15 | Columna3Ldwritekbspersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.16 | Columna3Ldioreadfailurespersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.17 | Columna3Ldwritefailurespersec | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.3.1.18 | Columna3Progress | read-write | mandatory | Shows the Initialization or Check Consistency Progress inPercent ge |
| 1.3.6.1.4.1.16.1.2.1.3.1.19 | Columna3Allattributes | read-only | mandatory | Shows All Attributes Of this logical Drive As Octet String |
| 1.3.6.1.4.1.16.1.2.1.4 | TabletPhysicalDeviceInformation | not-accessible | mandatory | SCSI physical device information. |
| 1.3.6.1.4.1.16.1.2.1.4.1 | RowePhysicalDeviceInformation | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.4.1.1 | Columna4Physadapternumber | read-only | mandatory | The controller number this drive is connected to. (0-based) |
| 1.3.6.1.4.1.16.1.2.1.4.1.2 | Columna4Physchannel | read-only | mandatory | channel number on adapter |
| 1.3.6.1.4.1.16.1.2.1.4.1.3 | Columna4Targetid | read-only | mandatory | SCSI Target ID of this device |
| 1.3.6.1.4.1.16.1.2.1.4.1.4 | Columna4State | read-write | mandatory | Current State of this physical drive |
| 1.3.6.1.4.1.16.1.2.1.4.1.5 | Columna4Arrayposition | read-only | mandatory | array position of this disk |
| 1.3.6.1.4.1.16.1.2.1.4.1.6 | Columna4Sizemb | read-only | mandatory | Actual size of this physical drive |
| 1.3.6.1.4.1.16.1.2.1.4.1.7 | Columna4Devicetype | read-only | mandatory | The type of physical device (cdrom, tape, disk, etc). |
| 1.3.6.1.4.1.16.1.2.1.4.1.8 | Columna4Inquirystring | read-only | mandatory | SCSI Inquiry String of this device |
| 1.3.6.1.4.1.16.1.2.1.4.1.9 | Columna4Scsilevel | read-only | mandatory | ANSI SCSI Level Conformance of this device |
| 1.3.6.1.4.1.16.1.2.1.4.1.10 | Columna4Syncnegotiation | read-only | mandatory | This indicates whether firmware has been enabled to perform Synchrous negotiation |
| 1.3.6.1.4.1.16.1.2.1.4.1.11 | Columna4Qtags | read-only | mandatory | This indicates maximum number of concurrent commands that can be issued to thisdevice |
| 1.3.6.1.4.1.16.1.2.1.4.1.12 | Columna4Rebuildprogress | read-write | mandatory | This Field Shows the Rebuild Progress In Percent. If There Is No Rebuild Started Then The Rebuild Progress Shown Will Be Zero Percent. |
| 1.3.6.1.4.1.16.1.2.1.4.1.13 | Columna4Mediumerrors | read-only | mandatory | Medium error occured |
| 1.3.6.1.4.1.16.1.2.1.4.1.14 | Columna4Othererrors | read-only | mandatory | Other errors occured |
| 1.3.6.1.4.1.16.1.2.1.4.1.15 | Columna4Allattributes | read-only | mandatory | logical drive status for this adpater |
| 1.3.6.1.4.1.16.1.2.1.5 | TabletChannels | not-accessible | mandatory | A list of channel Entries containing properties about scsi channels |
| 1.3.6.1.4.1.16.1.2.1.5.1 | RoweChannels | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.5.1.1 | Columna5Chanadapternumber | read-only | mandatory | The Adapter Number |
| 1.3.6.1.4.1.16.1.2.1.5.1.2 | Columna5Channel | read-only | mandatory | Channel Number |
| 1.3.6.1.4.1.16.1.2.1.5.1.3 | Columna5Terminations | read-only | mandatory | Current Terminations effective on this channel |
| 1.3.6.1.4.1.16.1.2.1.5.1.4 | Columna5Channelstatus | read-only | mandatory | Current Activity status |
| 1.3.6.1.4.1.16.1.2.1.6 | TabletAlertManagementInformation | not-accessible | mandatory | Alert Management Information |
| 1.3.6.1.4.1.16.1.2.1.6.1 | RoweAlertManagementInformation | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.6.1.1 | Columna6Dmiindication | read-write | mandatory | Indicates whether error reporting using dmiindication has been enabled |
| 1.3.6.1.4.1.16.1.2.1.6.1.2 | Columna6Ams2alerts | read-write | mandatory | Indicates whether error reporting using AMS2 alerts has been enabled |
| 1.3.6.1.4.1.16.1.2.1.6.1.3 | Columna6Eventlog | read-write | mandatory | Indicates whether error reporting using NT event log has been enabled |
| 1.3.6.1.4.1.16.1.2.1.7 | TabletGlobalinfo | not-accessible | mandatory | Global Controller and logical drive information |
| 1.3.6.1.4.1.16.1.2.1.7.1 | RoweGlobalinfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.7.1.1 | Columna7Globalcltrinfo | read-only | mandatory | global controller information |
| 1.3.6.1.4.1.16.1.2.1.99 | TabletMiftomib | not-accessible | mandatory | This group maps the DMI attributes to SNMP. |
| 1.3.6.1.4.1.16.1.2.1.99.1 | RoweMiftomib | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.99.1.1 | Columna99AmiMegaraidMib | read-only | mandatory | The MIB name that defines this MIF |
| 1.3.6.1.4.1.16.1.2.1.99.1.2 | Columna99MibOid | read-only | mandatory | The MIB OID that corresponds to this MIF |
| 1.3.6.1.4.1.16.1.2.1.99.1.3 | Columna99DisableTraps | read-only | mandatory | Setting this value to 1 disables trap generation. |
| 1.3.6.1.4.1.16.1.2.1.103 | TabletCompositeDriveAlerts | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1 | RoweCompositeDriveAlerts | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.1 | Columna103EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.16.1.2.1.103.1.2 | Columna103EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.16.1.2.1.103.1.3 | Columna103IsEventStateBased | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.4 | Columna103EventStateKey | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.5 | Columna103AssociatedGroup | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.6 | Columna103EventSystem | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.7 | Columna103EventSubsystem | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.8 | Columna103EventSolution | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.9 | Columna103InstanceDataPresent | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.10 | Columna103VendorSpecificMessage | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.11 | Columna103VendorSpecificData | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.103.1.12 | Columna103VendorTrapNumber | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104 | TabletPhysicalDriveAlerts | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1 | RowePhysicalDriveAlerts | not-accessible | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.1 | Columna104EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.16.1.2.1.104.1.2 | Columna104EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.16.1.2.1.104.1.3 | Columna104IsEventStateBased | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.4 | Columna104EventStateKey | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.5 | Columna104AssociatedGroup | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.6 | Columna104EventSystem | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.7 | Columna104EventSubsystem | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.8 | Columna104EventSolution | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.9 | Columna104InstanceDataPresent | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.10 | Columna104VendorSpecificMessage | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.11 | Columna104VendorSpecificData | read-only | mandatory | |
| 1.3.6.1.4.1.16.1.2.1.104.1.12 | Columna104VendorTrapNumber | read-only | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DmiComponentIndex | INTEGER | ||
| DmiDateX | OCTET STRING (SIZE (28)) | ||
| DmiInteger | INTEGER | ||
| DmiOctetstring | OCTET STRING |