ANIC-MIB
22 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.7 | Nodeanic | |||
| 1.3.6.1.4.1.429.1.7.1 | NodeanicCmd | |||
| 1.3.6.1.4.1.429.1.7.1.1 | TableanicCmdTable | not-accessible | mandatory | The NIC Command table contains an entry for each of the manageable Analog Modem NIC entity in the chassis. It provides a means through which to take specific a… |
| 1.3.6.1.4.1.429.1.7.1.1.1 | RowanicCmdEntry | not-accessible | mandatory | There is one NIC Command entry per NIC entity in the chassis. |
| 1.3.6.1.4.1.429.1.7.1.1.1.1 | ColumnanicCmdIndex | read-only | mandatory | A unique value for each manageable Analog Modem NIC entity in the chassis. The value of this object matches the value of the index of the corresponding managea… |
| 1.3.6.1.4.1.429.1.7.1.1.1.2 | ColumnanicCmdMgtStationId | read-write | mandatory | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.4.1.429.1.7.1.1.1.3 | ColumnanicCmdReqId | read-only | mandatory | This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this NIC Card. If the reques… |
| 1.3.6.1.4.1.429.1.7.1.1.1.4 | ColumnanicCmdFunction | read-write | mandatory | This object contains a value which describes the command which is being invoked. |
| 1.3.6.1.4.1.429.1.7.1.1.1.5 | ColumnanicCmdForce | read-write | mandatory | In some cases, the NIC may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not p… |
| 1.3.6.1.4.1.429.1.7.1.1.1.6 | ColumnanicCmdParam | read-write | mandatory | This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required. |
| 1.3.6.1.4.1.429.1.7.1.1.1.7 | ColumnanicCmdResult | read-only | mandatory | This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. |
| 1.3.6.1.4.1.429.1.7.1.1.1.8 | ColumnanicCmdCode | read-only | mandatory | The value of this object upon test completion is dependent on the value of nicCmdFunction used to invoke the command. In the case of action commands, the value… |
| 1.3.6.1.4.1.429.1.7.2 | NodeanicCfg | |||
| 1.3.6.1.4.1.429.1.7.2.1 | TableanicCfgTable | not-accessible | mandatory | The NIC Configuration table contains an entry for each entity in the NIC. It provides a means through which to configure an individual entity. |
| 1.3.6.1.4.1.429.1.7.2.1.1 | RowanicCfgEntry | not-accessible | mandatory | There is one NIC configure entry per NIC entity in the chassis. |
| 1.3.6.1.4.1.429.1.7.2.1.1.1 | ColumnanicCfgIndex | read-only | mandatory | A unique value for each entity in the Analog Modem NIC card. |
| 1.3.6.1.4.1.429.1.7.2.1.1.2 | ColumnanicCfgMdmRingNATrapEna | read-write | mandatory | Enable or disable the modem ring no answer event. |
| 1.3.6.1.4.1.429.1.7.2.1.1.3 | ColumnanicCfgDteRingNATrapEna | read-write | mandatory | Enable or Disable the DTE ring no answer event. |
| 1.3.6.1.4.1.429.1.7.2.1.1.4 | ColumnanicCfgRingThresh | read-write | mandatory | Set up the number of ring threshold for the ring no answer events. |
| 1.3.6.1.4.1.429.1.7.2.1.1.5 | ColumnanicCfgLineStatus | read-only | mandatory | This object is used to specify the line status. |