MIB Viewer

ANS-GS-MIB

268 objects
No module-level DESCRIPTION found.
Imported Objects
ANS-COMMON-MIBDateAndTime mlpmpR115 RowPointer RowStatus
ANS-EQUIPMENT-MIBansBoardPosition ansBoardSubrackIndex ansBoardSystemNodeIndex
RFC1213-MIBDisplayString
SNMPv2-SMIIpAddress OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.193.96.115.4Nodeconnections
1.3.6.1.4.1.193.96.115.4.1NodeaccessUserPort
1.3.6.1.4.1.193.96.115.4.1.1TableansAccessUserPortTablenot-accessiblemandatoryEntries in the ansAccessUserPortTable represents the physical ATM interface towards the STU located in the NIU and will be of type 'ATM'.
1.3.6.1.4.1.193.96.115.4.1.1.1RowansAccessUserPortEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.1.1.1.1ColumnansAccessUserPortSystemNoderead-onlymandatoryReference to the system node the user port is contained within.
1.3.6.1.4.1.193.96.115.4.1.1.1.2ColumnansAccessUserPortSubrackread-onlymandatoryReference to the subrack the user port belongs to.
1.3.6.1.4.1.193.96.115.4.1.1.1.3ColumnansAccessUserPortPositionread-onlymandatoryReference to the board the user port belongs to.
1.3.6.1.4.1.193.96.115.4.1.1.1.4ColumnansAccessUserPortIndexread-onlymandatoryReference to the interface within the board.
1.3.6.1.4.1.193.96.115.4.1.1.1.5ColumnansAccessUserPortTyperead-onlymandatoryIndicates the type of physical interface that is connected to the port.
1.3.6.1.4.1.193.96.115.4.1.1.1.6ColumnansAccessUserPortMaxBwDsread-onlymandatoryMaximum cell rate this port is capable of in the downstream direction.
1.3.6.1.4.1.193.96.115.4.1.1.1.7ColumnansAccessUserPortMaxBwUsread-onlymandatoryMaximum cell rate this port is capable of in the upstream direction.
1.3.6.1.4.1.193.96.115.4.1.1.1.8ColumnansAccessUserPortAvailBwDsread-onlymandatoryAvailable bandwidth in cells per second over the port in the downstream direction.
1.3.6.1.4.1.193.96.115.4.1.1.1.9ColumnansAccessUserPortAvailBwUsread-onlymandatoryAvailable bandwidth in cells per second over the port in the upstream direction.
1.3.6.1.4.1.193.96.115.4.1.1.1.10ColumnansAccessUserPortMinVpiread-onlymandatoryThe smallest VPI accepted in both directions through this user port.
1.3.6.1.4.1.193.96.115.4.1.1.1.11ColumnansAccessUserPortMaxVpiread-onlymandatoryThe largest VPI accepted in both directions through this user port.
1.3.6.1.4.1.193.96.115.4.1.1.1.12ColumnansAccessUserPortMinVciread-onlymandatoryThe smallest VCI accepted in both directions through this user port.
1.3.6.1.4.1.193.96.115.4.1.1.1.13ColumnansAccessUserPortMaxVciread-onlymandatoryThe largest VCI accepted in both directions through this user port.
1.3.6.1.4.1.193.96.115.4.1.1.1.14ColumnansAccessUserPortLabelread-writemandatoryA settable name or description of this user port.
1.3.6.1.4.1.193.96.115.4.1.1.1.15ColumnansAccessUserPortOperStatusread-onlymandatory
1.3.6.1.4.1.193.96.115.4.1.1.1.16ColumnansAccessUserPortAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.1.1.1.17ColumnansAccessUserPortUsageStateread-onlymandatory
1.3.6.1.4.1.193.96.115.4.1.1.1.18ColumnansAccessUserPortAtmFormatread-writemandatory
1.3.6.1.4.1.193.96.115.4.2NodeaccessServicePort
1.3.6.1.4.1.193.96.115.4.2.1TableansAccessServicePortTablenot-accessiblemandatoryEntries in the ansAccessServicePortTable represents a bidirectional STM1 port in the RF-shelf.
1.3.6.1.4.1.193.96.115.4.2.1.1RowansAccessServicePortEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.2.1.1.1ColumnansAccessServicePortSystemNoderead-onlymandatoryIndicates wich system node the port is contained within.
1.3.6.1.4.1.193.96.115.4.2.1.1.2ColumnansAccessServicePortSubrackread-onlymandatoryIndicates wich subrack the port is contained within.
1.3.6.1.4.1.193.96.115.4.2.1.1.3ColumnansAccessServicePortPositionread-onlymandatoryIndicates the slot position within the subrack
1.3.6.1.4.1.193.96.115.4.2.1.1.4ColumnansAccessServicePortIndexread-onlymandatoryIndicates physical port index on the board.
1.3.6.1.4.1.193.96.115.4.2.1.1.5ColumnansAccessServicePortLabelread-writemandatoryText string that may be used to name the port.
1.3.6.1.4.1.193.96.115.4.2.1.1.6ColumnansAccessServicePortMaxBwDsread-onlymandatoryMaximum cell rate this port is capable of in the downstream direction.
1.3.6.1.4.1.193.96.115.4.2.1.1.7ColumnansAccessServicePortMaxBwUsread-onlymandatoryMaximum cell rate this port is capable of in the upstream direction.
1.3.6.1.4.1.193.96.115.4.2.1.1.8ColumnansAccessServicePortAvailBwDsread-onlymandatoryAvailable bandwidth in cells per second over the port in the downstream direction.
1.3.6.1.4.1.193.96.115.4.2.1.1.9ColumnansAccessServicePortAvailBwUsread-onlymandatoryAvailable bandwidth in cells per second over the port in the upstream direction.
1.3.6.1.4.1.193.96.115.4.2.1.1.10ColumnansAccessServicePortMinVpiread-onlymandatoryThe smallest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.2.1.1.11ColumnansAccessServicePortMaxVpiread-onlymandatoryThe largest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.2.1.1.12ColumnansAccessServicePortMinVciread-onlymandatoryThe smallest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.2.1.1.13ColumnansAccessServicePortMaxVciread-onlymandatoryThe largest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.2.1.1.14ColumnansAccessServicePortOperStatusread-onlymandatory
1.3.6.1.4.1.193.96.115.4.2.1.1.15ColumnansAccessServicePortAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.2.1.1.16ColumnansAccessServicePortUsageStateread-onlymandatory
1.3.6.1.4.1.193.96.115.4.2.1.1.17ColumnansAccessServicePortAtmFormatread-writemandatory
1.3.6.1.4.1.193.96.115.4.2.1.1.18ColumnansAccessServicePortTyperead-onlymandatoryIndicates the type of physical interface that is connected to the service port.
1.3.6.1.4.1.193.96.115.4.3NodeaccessServiceUserPort
1.3.6.1.4.1.193.96.115.4.3.1TableansAccessServiceUserPortTablenot-accessiblemandatoryEntries in the ansAccessServiceUserPortTable represents a bidirectional STM1 port in the RF-shelf.
1.3.6.1.4.1.193.96.115.4.3.1.1RowansAccessServiceUserPortEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.3.1.1.1ColumnansAccessServiceUserPortSystemNoderead-onlymandatoryIndicates wich system node the port is contained within.
1.3.6.1.4.1.193.96.115.4.3.1.1.2ColumnansAccessServiceUserPortSubrackread-onlymandatoryIndicates wich subrack the port is contained within.
1.3.6.1.4.1.193.96.115.4.3.1.1.3ColumnansAccessServiceUserPortPositionread-onlymandatoryIndicates the slot position within the subrack
1.3.6.1.4.1.193.96.115.4.3.1.1.4ColumnansAccessServiceUserPortIndexread-onlymandatoryIndicates physical port index on the board.
1.3.6.1.4.1.193.96.115.4.3.1.1.5ColumnansAccessServiceUserPortLabelread-writemandatoryText string that may be used to name the port.
1.3.6.1.4.1.193.96.115.4.3.1.1.6ColumnansAccessServiceUserPortMaxBwDsread-onlymandatoryMaximum cell rate this port is capable of in the downstream direction.
1.3.6.1.4.1.193.96.115.4.3.1.1.7ColumnansAccessServiceUserPortMaxBwUsread-onlymandatoryMaximum cell rate this port is capable of in the upstream direction.
1.3.6.1.4.1.193.96.115.4.3.1.1.8ColumnansAccessServiceUserPortAvailBwDsread-onlymandatoryAvailable bandwidth in cells per second over the port in the downstream direction.
1.3.6.1.4.1.193.96.115.4.3.1.1.9ColumnansAccessServiceUserPortAvailBwUsread-onlymandatoryAvailable bandwidth in cells per second over the port in the upstream direction.
1.3.6.1.4.1.193.96.115.4.3.1.1.10ColumnansAccessServiceUserPortMinVpiread-onlymandatoryThe smallest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.3.1.1.11ColumnansAccessServiceUserPortMaxVpiread-onlymandatoryThe largest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.3.1.1.12ColumnansAccessServiceUserPortMinVciread-onlymandatoryThe smallest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.3.1.1.13ColumnansAccessServiceUserPortMaxVciread-onlymandatoryThe largest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.3.1.1.14ColumnansAccessServiceUserPortOperStatusread-onlymandatory
1.3.6.1.4.1.193.96.115.4.3.1.1.15ColumnansAccessServiceUserPortAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.3.1.1.16ColumnansAccessServiceUserPortUsageStateread-onlymandatory
1.3.6.1.4.1.193.96.115.4.3.1.1.17ColumnansAccessServiceUserPortAtmFormatread-writemandatory
1.3.6.1.4.1.193.96.115.4.3.1.1.18ColumnansAccessServiceUserPortTyperead-onlymandatoryIndicates the type of physical interface that is connected to the service-user port.
1.3.6.1.4.1.193.96.115.4.4NodeaccessInternalPort
1.3.6.1.4.1.193.96.115.4.4.1TableansAccessInternalPortTablenot-accessiblemandatoryEntries in the ansAccessInternalPortTable represents a bidirectional STM1 port
1.3.6.1.4.1.193.96.115.4.4.1.1RowansAccessInternalPortEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.4.1.1.1ColumnansAccessInternalPortSystemNoderead-onlymandatoryIndicates wich system node the port is contained within.
1.3.6.1.4.1.193.96.115.4.4.1.1.2ColumnansAccessInternalPortSubrackread-onlymandatoryIndicates wich subrack the port is contained within.
1.3.6.1.4.1.193.96.115.4.4.1.1.3ColumnansAccessInternalPortPositionread-onlymandatoryIndicates the slot position within the subrack
1.3.6.1.4.1.193.96.115.4.4.1.1.4ColumnansAccessInternalPortIndexread-onlymandatoryIndicates physical port index on the board.
1.3.6.1.4.1.193.96.115.4.4.1.1.5ColumnansAccessInternalPortLabelread-writemandatoryText string that may be used to name the port.
1.3.6.1.4.1.193.96.115.4.4.1.1.6ColumnansAccessInternalPortMaxBwDsread-onlymandatoryMaximum cell rate this port is capable of in the downstream direction.
1.3.6.1.4.1.193.96.115.4.4.1.1.7ColumnansAccessInternalPortMaxBwUsread-onlymandatoryMaximum cell rate this port is capable of in the upstream direction.
1.3.6.1.4.1.193.96.115.4.4.1.1.8ColumnansAccessInternalPortAvailBwDsread-onlymandatoryAvailable bandwidth in cells per second over the port in the downstream direction.
1.3.6.1.4.1.193.96.115.4.4.1.1.9ColumnansAccessInternalPortAvailBwUsread-onlymandatoryAvailable bandwidth in cells per second over the port in the upstream direction.
1.3.6.1.4.1.193.96.115.4.4.1.1.10ColumnansAccessInternalPortMinVpiread-onlymandatoryThe smallest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.4.1.1.11ColumnansAccessInternalPortMaxVpiread-onlymandatoryThe largest VPI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.4.1.1.12ColumnansAccessInternalPortMinVciread-onlymandatoryThe smallest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.4.1.1.13ColumnansAccessInternalPortMaxVciread-onlymandatoryThe largest VCI value possible over this port in both directions.
1.3.6.1.4.1.193.96.115.4.4.1.1.14ColumnansAccessInternalPortOperStatusread-onlymandatory
1.3.6.1.4.1.193.96.115.4.4.1.1.15ColumnansAccessInternalPortAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.4.1.1.16ColumnansAccessInternalPortUsageStateread-onlymandatory
1.3.6.1.4.1.193.96.115.4.4.1.1.17ColumnansAccessInternalPortAtmFormatread-writemandatory
1.3.6.1.4.1.193.96.115.4.4.1.1.18ColumnansAccessInternalPortTyperead-onlymandatoryIndicates the type of physical interface that is connected to the internal port.
1.3.6.1.4.1.193.96.115.4.5NodeansAtmCreateCC
1.3.6.1.4.1.193.96.115.4.5.1TableansAtmCreateCCTablenot-accessiblemandatoryEntries in the ansAtmCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
1.3.6.1.4.1.193.96.115.4.5.1.1RowansAtmCreateCCEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.5.1.1.1ColumnansAtmCCAUPSystemNoderead-onlymandatoryReference to the system node the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.5.1.1.2ColumnansAtmCCAUPSubrackread-onlymandatoryReference to the subrack the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.5.1.1.3ColumnansAtmCCAUPPositionread-onlymandatoryReference to user port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.5.1.1.4ColumnansAtmCCAUPIndexread-onlymandatoryReference to user port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.5.1.1.5ColumnansAtmCCAUPVPIread-onlymandatoryVPI value at the user port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.5.1.1.6ColumnansAtmCCAUPVCIread-onlymandatoryVCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.5.1.1.7ColumnansAtmCCASPSubrackread-writemandatoryReference to the subrack the access service port belongs to.
1.3.6.1.4.1.193.96.115.4.5.1.1.8ColumnansAtmCCASPPositionread-writemandatoryReference to access service port port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.5.1.1.9ColumnansAtmCCASPIndexread-writemandatoryReference to access service port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.5.1.1.10ColumnansAtmCCASPVPIread-writemandatoryVPI value at the access service port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.5.1.1.11ColumnansAtmCCASPVCIread-writemandatoryVCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.5.1.1.12ColumnansAtmCCTyperead-writemandatoryIndicates if the entry is a VC or VP cross-connection.
1.3.6.1.4.1.193.96.115.4.5.1.1.13ColumnansAtmCCServiceClassread-writemandatoryIndicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate ser…
1.3.6.1.4.1.193.96.115.4.5.1.1.14ColumnansAtmCCSourceTyperead-writemandatoryIndicates the type of service that is transported on top of the ATM layer.
1.3.6.1.4.1.193.96.115.4.5.1.1.15ColumnansAtmCCServiceTyperead-writemandatoryIndicates the type of connection ATM or ETHERNET.
1.3.6.1.4.1.193.96.115.4.5.1.1.16ColumnansAtmCCPcrAtoBread-writemandatoryBandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicates the u…
1.3.6.1.4.1.193.96.115.4.5.1.1.17ColumnansAtmCCPcrBtoAread-writemandatoryBandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the uns…
1.3.6.1.4.1.193.96.115.4.5.1.1.18ColumnansAtmCCMultiread-writemandatoryIndicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
1.3.6.1.4.1.193.96.115.4.5.1.1.19ColumnansAtmCCAdminStatusread-writemandatoryIndicetes the administrative state of the cross-connection.
1.3.6.1.4.1.193.96.115.4.5.1.1.20ColumnansAtmCCRowStatusread-writemandatoryUsed to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
1.3.6.1.4.1.193.96.115.4.6NodeansCeAtmCreateCC
1.3.6.1.4.1.193.96.115.4.6.1TableansCeAtmCreateCCTablenot-accessiblemandatoryEntries in the ansCeAtmCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
1.3.6.1.4.1.193.96.115.4.6.1.1RowansCeAtmCreateCCEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.1ColumnansCeAtmCCAUPSystemNoderead-onlymandatoryReference to the system node the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.6.1.1.2ColumnansCeAtmCCAUPSubrackread-onlymandatoryReference to the subrack the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.6.1.1.3ColumnansCeAtmCCAUPPositionread-onlymandatoryReference to user port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.6.1.1.4ColumnansCeAtmCCAUPIndexread-onlymandatoryReference to user port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.6.1.1.5ColumnansCeAtmCCAUPVPIread-onlymandatoryVPI value at the user port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.6.1.1.6ColumnansCeAtmCCAUPVCIread-onlymandatoryVCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.6.1.1.7ColumnansCeAtmCCASPSubrackread-writemandatoryReference to the subrack the access service port belongs to.
1.3.6.1.4.1.193.96.115.4.6.1.1.8ColumnansCeAtmCCASPPositionread-writemandatoryReference to access service port port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.6.1.1.9ColumnansCeAtmCCASPIndexread-writemandatoryReference to access service port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.6.1.1.10ColumnansCeAtmCCASPVPIread-writemandatoryVPI value at the access service port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.6.1.1.11ColumnansCeAtmCCASPVCIread-writemandatoryVCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.6.1.1.12ColumnansCeAtmCCTyperead-writemandatoryIndicates if the entry is a VC or VP cross-connection.
1.3.6.1.4.1.193.96.115.4.6.1.1.13ColumnansCeAtmCCServiceClassread-writemandatoryIndicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate ser…
1.3.6.1.4.1.193.96.115.4.6.1.1.14ColumnansCeAtmCCSourceTyperead-writemandatoryIndicates the type of service that is transported on top of the ATM layer.
1.3.6.1.4.1.193.96.115.4.6.1.1.15ColumnansCeAtmCCPcrAtoBread-writemandatoryBandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicetes the u…
1.3.6.1.4.1.193.96.115.4.6.1.1.16ColumnansCeAtmCCPcrBtoAread-writemandatoryBandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the uns…
1.3.6.1.4.1.193.96.115.4.6.1.1.17ColumnansCeAtmCCMultiread-writemandatoryIndicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
1.3.6.1.4.1.193.96.115.4.6.1.1.18ColumnansCeAtmCCAdminStatusread-writemandatoryIndicetes the administrative state of the cross-connection.
1.3.6.1.4.1.193.96.115.4.6.1.1.19ColumnansCeAtmCCTimeSlotParead-writemandatoryThe TS list must have the format: [int1,int2,...]. not_used (unstructured)
1.3.6.1.4.1.193.96.115.4.6.1.1.20ColumnansCeAtmCCTypeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.21ColumnansCeAtmCCFillLevelParead-writemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.22ColumnansCeAtmCCCdvtParead-writemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.23ColumnansCeAtmCCMaxBuffSizeParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.6.1.1.24ColumnansCeAtmCCTcModeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.25ColumnansCeAtmCCTcTypeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.6.1.1.26ColumnansCeAtmCCTcBtoAParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.6.1.1.27ColumnansCeAtmCCTcAtoBParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.6.1.1.28ColumnansCeAtmCCRowStatusread-writemandatoryUsed to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
1.3.6.1.4.1.193.96.115.4.7NodeansCeCeCreateCC
1.3.6.1.4.1.193.96.115.4.7.1TableansCeCeCreateCCTablenot-accessiblemandatoryEntries in the ansCeCeCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
1.3.6.1.4.1.193.96.115.4.7.1.1RowansCeCeCreateCCEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.1ColumnansCeCeCCAUPSystemNoderead-onlymandatoryReference to the system node the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.7.1.1.2ColumnansCeCeCCAUPSubrackread-onlymandatoryReference to the subrack the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.7.1.1.3ColumnansCeCeCCAUPPositionread-onlymandatoryReference to user port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.7.1.1.4ColumnansCeCeCCAUPIndexread-onlymandatoryReference to user port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.7.1.1.5ColumnansCeCeCCAUPVPIread-onlymandatoryVPI value at the user port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.7.1.1.6ColumnansCeCeCCAUPVCIread-onlymandatoryVCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.7.1.1.7ColumnansCeCeCCASPSubrackread-writemandatoryReference to the subrack the access service port belongs to.
1.3.6.1.4.1.193.96.115.4.7.1.1.8ColumnansCeCeCCASPPositionread-writemandatoryReference to access service port port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.7.1.1.9ColumnansCeCeCCASPIndexread-writemandatoryReference to access service port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.7.1.1.10ColumnansCeCeCCASPVPIread-writemandatoryVPI value at the access service port. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.7.1.1.11ColumnansCeCeCCASPVCIread-writemandatoryVCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
1.3.6.1.4.1.193.96.115.4.7.1.1.12ColumnansCeCeCCTyperead-writemandatoryIndicates if the entry is a VC or VP cross-connection.
1.3.6.1.4.1.193.96.115.4.7.1.1.13ColumnansCeCeCCServiceClassread-writemandatoryIndicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate ser…
1.3.6.1.4.1.193.96.115.4.7.1.1.14ColumnansCeCeCCSourceTyperead-writemandatoryIndicates the type of service that is transported on top of the ATM layer.
1.3.6.1.4.1.193.96.115.4.7.1.1.15ColumnansCeCeCCPcrAtoBread-writemandatoryBandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicetes the u…
1.3.6.1.4.1.193.96.115.4.7.1.1.16ColumnansCeCeCCPcrBtoAread-writemandatoryBandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the uns…
1.3.6.1.4.1.193.96.115.4.7.1.1.17ColumnansCeCeCCMultiread-writemandatoryIndicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
1.3.6.1.4.1.193.96.115.4.7.1.1.18ColumnansCeCeCCAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.19ColumnansCeCeCCTimeSlotParead-writemandatoryThe TS list must have the format: [int1,int2,...]. not_used (unstructured)
1.3.6.1.4.1.193.96.115.4.7.1.1.20ColumnansCeCeCCTypeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.21ColumnansCeCeCCFillLevelParead-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.22ColumnansCeCeCCCdvtParead-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.23ColumnansCeCeCCMaxBuffSizeParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.24ColumnansCeCeCCTcModeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.25ColumnansCeCeCCTcTypeParead-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.26ColumnansCeCeCCTcBtoAParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.27ColumnansCeCeCCTcAtoBParead-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.28ColumnansCeCeCCTimeSlotPbread-writemandatoryThe TS list must have the format: [int1,int2,...]. not_used (unstructured)
1.3.6.1.4.1.193.96.115.4.7.1.1.29ColumnansCeCeCCTypePbread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.30ColumnansCeCeCCFillLevelPbread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.31ColumnansCeCeCCCdvtPbread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.32ColumnansCeCeCCMaxBuffSizePbread-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.33ColumnansCeCeCCTcModePbread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.34ColumnansCeCeCCTcTypePbread-writemandatory
1.3.6.1.4.1.193.96.115.4.7.1.1.35ColumnansCeCeCCTcBtoAPbread-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.36ColumnansCeCeCCTcAtoBPbread-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.7.1.1.37ColumnansCeCeCCRowStatusread-writemandatoryUsed to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
1.3.6.1.4.1.193.96.115.4.8NodeansCrossConnect
1.3.6.1.4.1.193.96.115.4.8.1TableansCrossConnectTablenot-accessiblemandatoryEntries in the ansCrossConnectTable represents ATM VP and VP cross-connections between access user ports and access service ports.
1.3.6.1.4.1.193.96.115.4.8.1.1RowansCrossConnectEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.8.1.1.1ColumnansCCAUPSystemNodenot-accessiblemandatoryReference to the system node the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.8.1.1.2ColumnansCCAUPSubracknot-accessiblemandatoryReference to the subrack the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.8.1.1.3ColumnansCCAUPPositionnot-accessiblemandatoryReference to user port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.8.1.1.4ColumnansCCAUPIndexnot-accessiblemandatoryReference to user port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.8.1.1.5ColumnansCCAUPVPInot-accessiblemandatoryVPI value at the user port.
1.3.6.1.4.1.193.96.115.4.8.1.1.6ColumnansCCAUPVCInot-accessiblemandatoryVCI value at the user port. (100000 = undefined) Not applicable.
1.3.6.1.4.1.193.96.115.4.8.1.1.7ColumnansCCASPSubrackread-onlymandatoryReference to the subrack the access service port belongs to.
1.3.6.1.4.1.193.96.115.4.8.1.1.8ColumnansCCASPPositionread-onlymandatoryReference to access service port port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.8.1.1.9ColumnansCCASPIndexread-onlymandatoryReference to access service port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.8.1.1.10ColumnansCCASPVPIread-onlymandatoryVPI value at the access service port.
1.3.6.1.4.1.193.96.115.4.8.1.1.11ColumnansCCASPVCIread-onlymandatoryVCI value at the access service port. (100000 = undefined) Not applicable.
1.3.6.1.4.1.193.96.115.4.8.1.1.12ColumnansCCTyperead-onlymandatoryIndicates if the entry is a VC or VP cross-connection.
1.3.6.1.4.1.193.96.115.4.8.1.1.13ColumnansCCServiceClassread-onlymandatoryIndicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate ser…
1.3.6.1.4.1.193.96.115.4.8.1.1.14ColumnansCCPcrAtoBread-onlymandatoryBandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicates unspe…
1.3.6.1.4.1.193.96.115.4.8.1.1.15ColumnansCCPcrBtoAread-onlymandatoryBandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates unspeci…
1.3.6.1.4.1.193.96.115.4.8.1.1.16ColumnansCCSourceTyperead-onlymandatoryIndicates the type of service that is transported on top of the ATM layer.
1.3.6.1.4.1.193.96.115.4.8.1.1.17ColumnansCCServiceTyperead-onlymandatoryIndicates the type of connection CE, ATM or ETHERNET.
1.3.6.1.4.1.193.96.115.4.8.1.1.18ColumnansCCOperStatusread-onlymandatory
1.3.6.1.4.1.193.96.115.4.8.1.1.19ColumnansCCLastOperStatusChangeread-onlymandatoryThe time this VP cross-connect entered its current operational state.
1.3.6.1.4.1.193.96.115.4.8.1.1.20ColumnansCCAdminStatusread-writemandatory
1.3.6.1.4.1.193.96.115.4.8.1.1.21ColumnansCCMultiread-onlymandatoryIndicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
1.3.6.1.4.1.193.96.115.4.8.1.1.22ColumnansCCRowStatusread-writemandatoryUsed to delete cross-connect. A cross-connection is removed by seting the attribute to 'destroy'.
1.3.6.1.4.1.193.96.115.4.9NodeansApplData
1.3.6.1.4.1.193.96.115.4.9.1TableansApplDataTablenot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.9.1.1RowansApplDataEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.9.1.1.1ColumnansApplDataSystemNoderead-onlymandatoryReference to the system node the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.9.1.1.2ColumnansApplDataSubrackread-onlymandatoryReference to the subrack the access user port belongs to.
1.3.6.1.4.1.193.96.115.4.9.1.1.3ColumnansApplDataPositionread-onlymandatoryReference to user port's slot position within the subrack.
1.3.6.1.4.1.193.96.115.4.9.1.1.4ColumnansApplDataIndexread-onlymandatoryReference to user port's physical interface on the board.
1.3.6.1.4.1.193.96.115.4.9.1.1.5ColumnansApplDataVPIread-onlymandatoryVPI value at the user port.
1.3.6.1.4.1.193.96.115.4.9.1.1.6ColumnansApplDataVCIread-onlymandatoryVCI value at the user port.
1.3.6.1.4.1.193.96.115.4.9.1.1.7ColumnansApplDataOpStateread-onlymandatory
1.3.6.1.4.1.193.96.115.4.9.1.1.8ColumnansApplDataAdminStateread-writemandatory
1.3.6.1.4.1.193.96.115.4.9.1.1.9ColumnansApplDataServiceParamsread-onlymandatory
1.3.6.1.4.1.193.96.115.4.10NodeansAal1Pars
1.3.6.1.4.1.193.96.115.4.10.1TableansAal1ParsTablenot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.10.1.1RowansAal1ParsEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.10.1.1.1ColumnansAal1ParsTimeSlotread-onlymandatoryThe TS list has the format: [int1,int2,...]. not_used (unstructured)
1.3.6.1.4.1.193.96.115.4.10.1.1.2ColumnansAal1ParsTyperead-onlymandatory
1.3.6.1.4.1.193.96.115.4.10.1.1.3ColumnansAal1ParsFillLevelread-onlymandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.10.1.1.4ColumnansAal1ParsCdvtread-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.10.1.1.5ColumnansAal1ParsMaxBuffSizeread-writemandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.10.1.1.6ColumnansAal1ParsTcModeread-onlymandatory
1.3.6.1.4.1.193.96.115.4.10.1.1.7ColumnansAal1ParsTcTyperead-onlymandatory
1.3.6.1.4.1.193.96.115.4.10.1.1.8ColumnansAal1ParsTcBtoAread-onlymandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.10.1.1.9ColumnansAal1ParsTcAtoBread-onlymandatory(-1) undefined
1.3.6.1.4.1.193.96.115.4.11NodeansEthPars
1.3.6.1.4.1.193.96.115.4.11.1TableansEthParsTablenot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.11.1.1RowansEthParsEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.11.1.1.1ColumnansEthParsPcrShapingread-onlymandatory(-1) unspecified.
1.3.6.1.4.1.193.96.115.4.12NodeethernetPort
1.3.6.1.4.1.193.96.115.4.12.1TableethernetPortTablenot-accessiblemandatoryEntries in the ethernetPortTable represents extension records of the ethernet ports in the ansAccessUserPortTable.
1.3.6.1.4.1.193.96.115.4.12.1.1RowethernetPortEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.12.1.1.1ColumnethernetPortFcsEncapsulationread-writemandatoryTurn the sending off FCS checksum on or off.
1.3.6.1.4.1.193.96.115.4.12.1.1.2ColumnethernetPortMuxOrEncapsulationread-writemandatoryReference to transfer of ethernet frames.
1.3.6.1.4.1.193.96.115.4.12.1.1.3ColumnethernetPortIpAddressread-onlymandatoryIP adress of the NT when attribute ethernetPortMuxOrEncapsulation is set to pppVc or pppLlc
1.3.6.1.4.1.193.96.115.4.12.1.1.4ColumnethernetPortTyperead-onlymandatoryEthernet Type
1.3.6.1.4.1.193.96.115.4.12.1.1.5ColumnethernetPortOperatingModeread-writemandatoryEthernet Type
1.3.6.1.4.1.193.96.115.4.13NodepdhPort
1.3.6.1.4.1.193.96.115.4.13.1TablepdhPortTablenot-accessiblemandatoryPDH Port Table
1.3.6.1.4.1.193.96.115.4.13.1.1RowpdhPortEntrynot-accessiblemandatoryThis entity represents a PDH port for circuit emulation.
1.3.6.1.4.1.193.96.115.4.13.1.1.1ColumnpdhPortPortread-onlymandatoryPort at AT and CE board
1.3.6.1.4.1.193.96.115.4.13.1.1.2ColumnpdhPortTsUsedread-onlymandatoryTimeslot used
1.3.6.1.4.1.193.96.115.4.13.1.1.3ColumnpdhPortClockModeread-writemandatory...
1.3.6.1.4.1.193.96.115.4.13.1.1.4ColumnpdhPortHaulModeread-writemandatory...
1.3.6.1.4.1.193.96.115.4.13.1.1.5ColumnpdhPortLineCoderead-writemandatoryhdb3 valid for ansAccessUser/ServicePortType = e1 ami valid for ansAccessUser/ServicePortType = ds1 b8zs valid for ansAccessUser/ServicePortType = ds1
1.3.6.1.4.1.193.96.115.4.13.1.1.6ColumnpdhPortLoopbackread-writemandatory...
1.3.6.1.4.1.193.96.115.4.13.1.1.7ColumnpdhPortCasread-writemandatory...
1.3.6.1.4.1.193.96.115.4.13.1.1.8ColumnpdhPortFrameFormatread-writemandatory...
1.3.6.1.4.1.193.96.115.4.13.1.1.9ColumnpdhPortServiceTyperead-writemandatory...
1.3.6.1.4.1.193.96.115.4.14NodeterminalId
1.3.6.1.4.1.193.96.115.4.14.1TableansTerminalIdTablenot-accessiblemandatoryEntries in the ansTerminalIdTable represent the system node, subrack and position of ATs; These pieces of information can be used as an index into terminal spe…
1.3.6.1.4.1.193.96.115.4.14.1.1RowansTerminalIdEntrynot-accessiblemandatory
1.3.6.1.4.1.193.96.115.4.14.1.1.1ColumnansTerminalIdIdentread-onlymandatoryAn index that uniquely identifies an AT
1.3.6.1.4.1.193.96.115.4.14.1.1.2ColumnansTerminalIdSystemNoderead-onlymandatoryReference to the system node the AT belongs to
1.3.6.1.4.1.193.96.115.4.14.1.1.3ColumnansTerminalIdSubrackread-onlymandatoryReference to the subrack the AT belongs to
1.3.6.1.4.1.193.96.115.4.14.1.1.4ColumnansTerminalIdPositionread-onlymandatoryReference to the slot the AT belongs to
Type Definitions
NameSyntaxStatusDescription
AnsAal1ParsTcModeINTEGER{ undefined(-1), immediate(1), deleyed(2) }
AnsAal1ParsTcTypeINTEGER{ undefined(-1), service-specific(1), ds0ais(2) }
AnsAal1ParsTypeINTEGER{ unstructured(1), structured-contiguous(2), structured-free(3) }
AnsCCAdminStatusINTEGER{ unlocked(1), locked(2) }
AnsCCMultiINTEGER{ ptp(1), ptmp(2) }
AnsCCServiceClassINTEGER{ cbr1(1), cbr2(2), ubr(3) }
AnsCCSourceTypeINTEGER{ normal(1), epd(2) }
AnsCCTypeINTEGER{ vpc(1), vcc(2) }
AnsPortTypeINTEGER{ atm(1), ethernet(2), other(3), e1(4), ds1(5) }