ANS-TRAPS-MIB
131 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.96.115.1.0 | NodesystemUp | This is sent when the CP has initialised. | ||
| 1.3.6.1.4.1.193.96.115.1.1 | Nodelos | This is sent when a Loss Of Signal has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.2 | Nodelof | This is sent when a Loss Of Frame has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.3 | Nodelop | This is sent when a Loss Of Pointer has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.4 | Nodeais | This is sent when an Alarm Indication Signal has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.6 | Noderai | This is sent when a Remote Alarm Indication has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.8 | NodelossOfCellDelineation | This is sent when loss of cell delineation has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.10 | NodeprotectionSchemeNotRespected | his is sent when boards not respecting the protection scheme are present in the subrack. | ||
| 1.3.6.1.4.1.193.96.115.1.11 | NodernSwitched | A switch between a providing_service RN board with a cold_standby one has been performed. | ||
| 1.3.6.1.4.1.193.96.115.1.31 | NodesubrackMismatch | The subrack is wrongly configured in the configuration files. Power Management enabled even if no check in the hardware is performed. | ||
| 1.3.6.1.4.1.193.96.115.1.32 | NodesubrackCreated | A new subrack is created. | ||
| 1.3.6.1.4.1.193.96.115.1.33 | NodesystemNodeCreated | A new system node is created. | ||
| 1.3.6.1.4.1.193.96.115.1.34 | NodesystemNodeDeleted | A system node is deleted. | ||
| 1.3.6.1.4.1.193.96.115.1.35 | NodesubrackDeleted | A subrack is deleted. | ||
| 1.3.6.1.4.1.193.96.115.1.36 | NodecbrQueueFull | Temporary buffer overflow. | ||
| 1.3.6.1.4.1.193.96.115.1.37 | NodesignOnComplete | This is a notification that the sign on of an NT/AT is completed. | ||
| 1.3.6.1.4.1.193.96.115.1.38 | NodealarmDisturbance | This notification is sent if an alarm state changes frequently. | ||
| 1.3.6.1.4.1.193.96.115.1.39 | NodeselfTestOk | Loop on radio is working, i.e. mac, modem and radio have no faults. | ||
| 1.3.6.1.4.1.193.96.115.1.40 | NodeselfTestFailedOnRadio | Loop on radio does not work, i.e. mac or modem or radio faulty. | ||
| 1.3.6.1.4.1.193.96.115.1.52 | NoderadioTxOffFail | The radio is set off but is still trasmitting | ||
| 1.3.6.1.4.1.193.96.115.1.53 | NoderadioRestart | Restart of the Radio DP | ||
| 1.3.6.1.4.1.193.96.115.1.54 | NodeswDownloadFailureRadio | the download from the NU FPROM active or passive towards the passive area of radio has failed | ||
| 1.3.6.1.4.1.193.96.115.1.55 | NodeswDownloadFailureModem | the download from the NU FPROM active or passive towards the passive area of modem has failed | ||
| 1.3.6.1.4.1.193.96.115.1.56 | NodeincorrectSwVersModem | the active LM in the modem contains an incorrect SW version | ||
| 1.3.6.1.4.1.193.96.115.1.57 | NodesystemAudit | Generated by the CP to notify that a CP start/restart is ongoing. | ||
| 1.3.6.1.4.1.193.96.115.1.58 | NodeincorrectSwVersRadio | the active LM in the radio contains an incorrect SW version | ||
| 1.3.6.1.4.1.193.96.115.1.59 | NodeswdlFromActiveToModemInProgress | the download from the NU FPROM active towards the passive area of modem is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.1.60 | NodemcnWarning | |||
| 1.3.6.1.4.1.193.96.115.1.61 | NodelossOfNetSync | This is sent when critical alarms are detected at DPSW level on a specific board (ET/CE), which is master for the network. | ||
| 1.3.6.1.4.1.193.96.115.1.62 | NodeexternalAlarm1 | Is sent when an external alarm has been detected in the subrack (this is based on detection of relay alarm on input MISC 1 of the subrack ). An alarm ceasing r… | ||
| 1.3.6.1.4.1.193.96.115.1.63 | NodeatControlChannel | No communication with modem processor. | ||
| 1.3.6.1.4.1.193.96.115.1.64 | NodeexternalAlarm2 | Is sent when an external alarm has been detected in the subrack (this is based on detection of relay alarm on input MISC 2 of the subrack ). An alarm ceasing r… | ||
| 1.3.6.1.4.1.193.96.115.1.65 | NodesuMismatch | A SU of wrong type has been inserted in a configured SU slot. | ||
| 1.3.6.1.4.1.193.96.115.1.66 | NodesuPowerFailure | Power failure on a SU. | ||
| 1.3.6.1.4.1.193.96.115.1.67 | NodesuInitFailure | Initialization of a SU failed. | ||
| 1.3.6.1.4.1.193.96.115.1.68 | NodesuUnsupportedType | SU of a type which is not supported was inserted. | ||
| 1.3.6.1.4.1.193.96.115.1.69 | NodesuHwFailure | HW failure on a SU. | ||
| 1.3.6.1.4.1.193.96.115.1.70 | NoderadioTxLos | IF input level from modem too low. | ||
| 1.3.6.1.4.1.193.96.115.1.71 | NoderadioRfOut | RF output level to antenna too low. | ||
| 1.3.6.1.4.1.193.96.115.1.72 | NoderadioTxFreq | Transmit frequency incorrect. | ||
| 1.3.6.1.4.1.193.96.115.1.73 | NoderadioRxIfc | Rx intermediate IF PLL unlocked. | ||
| 1.3.6.1.4.1.193.96.115.1.74 | NoderadioRxFreq | Receive frequency incorrect. | ||
| 1.3.6.1.4.1.193.96.115.1.75 | NodeswdlFromActiveToRadioInProgress | the download from the NU FPROM active towards the passive area of radio is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.1.76 | NoderadioHighTemperature | Outdoor temperature above limit. | ||
| 1.3.6.1.4.1.193.96.115.1.77 | NoderadioTxOn | Transmitter always on. | ||
| 1.3.6.1.4.1.193.96.115.1.78 | NoderadioVco | Radio VCO has a reduced margin. | ||
| 1.3.6.1.4.1.193.96.115.1.79 | NoderadioTxLevel | Unable to adjust radio output power level. | ||
| 1.3.6.1.4.1.193.96.115.1.80 | NodeswdlFromPassiveToModemInProgress | the download from the NU FPROM passive towards the active area of modem is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.1.81 | NodeswdlFromPassiveToRadioInProgress | the download from the NU FPROM passive towards the active area of radio is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.1.82 | NodemodemRauPow | RAU power supply failure. | ||
| 1.3.6.1.4.1.193.96.115.1.83 | NodemodemLofTdm | Loss of synchronization. | ||
| 1.3.6.1.4.1.193.96.115.1.84 | NoderadioMismatch | UKL received different from UKL configured | ||
| 1.3.6.1.4.1.193.96.115.1.85 | NodemodemModInd | Unable to adjust modulation index. | ||
| 1.3.6.1.4.1.193.96.115.1.86 | NodemodemSwException | Software exception. | ||
| 1.3.6.1.4.1.193.96.115.1.87 | NodemodemHwException | Hardware error. | ||
| 1.3.6.1.4.1.193.96.115.1.88 | NodemodemControlChannel | No communication with radio unit processor. | ||
| 1.3.6.1.4.1.193.96.115.1.89 | NodemodemRestart | This is a notification that the sign on of an NT/AT is completed. | ||
| 1.3.6.1.4.1.193.96.115.1.90 | NodeethernetLossOfCarrier | Sent if ethernet port detects loss of carrier. | ||
| 1.3.6.1.4.1.193.96.115.1.91 | Nodeaal1Starvation | Sent when a buffer-underflow condition is detected. | ||
| 1.3.6.1.4.1.193.96.115.1.92 | NodelossOfRefClock | Sent when the 8 kHz clock is lost. | ||
| 1.3.6.1.4.1.193.96.115.1.94 | NoderadioIrsLoss | RF input power level too low on average on all the transmitting terminals | ||
| 1.3.6.1.4.1.193.96.115.1.95 | NodelofMf | This is sent when a Loss Of MultiFrame has been detected. | ||
| 1.3.6.1.4.1.193.96.115.1.96 | NodeselfTestFailedOnModem | Loop on modem does not work, i.e. mac or modem faulty. | ||
| 1.3.6.1.4.1.193.96.115.1.97 | NodediskFull | The filesystem on a disk in the CP is almost full. | ||
| 1.3.6.1.4.1.193.96.115.1.98 | NodehwFailure | Sent when DP has reported faulty HW. | ||
| 1.3.6.1.4.1.193.96.115.1.99 | NodesuRemoved | Sent when SU has been removed. | ||
| 1.3.6.1.4.1.193.96.115.1.100 | NodemodemEberUp | Uplink Eber received in modem is above limit. | ||
| 1.3.6.1.4.1.193.96.115.1.101 | NodemodemEberDown | Downlink Eber received in modem is above limit. | ||
| 1.3.6.1.4.1.193.96.115.1.102 | NodemodemRxlFinUp | Uplink IF input level from RAU too low. | ||
| 1.3.6.1.4.1.193.96.115.1.103 | NodemodemRxlFinDown | Downlink IF input level from RAU too low. | ||
| 1.3.6.1.4.1.193.96.115.1.104 | NoderadioTxVco | The TX VCO has reached a reduced action margin in the Radio Unit. | ||
| 1.3.6.1.4.1.193.96.115.1.106 | Nodeaal1SarFailure | Sent when a temporary loss of traffic due to AAL1 device failure is detected. | ||
| 1.3.6.1.4.1.193.96.115.1.107 | NodemasterLinkSwitched | A switch between the link that is giving the synchronization at the system node. | ||
| 1.3.6.1.4.1.193.96.115.1.108 | NodelicenseCapacityEvent | This event is sent when 85%, 90% or 95% of license capacity is reached. | ||
| 1.3.6.1.4.1.193.96.115.1.109 | NodelicenseExpirationEvent | This event is sent once a day starting from 10 days before expiration date. | ||
| 1.3.6.1.4.1.193.96.115.1.110 | NodehostidMismatch | This event is sent at System Restart if a hostid mismatch exists. | ||
| 1.3.6.1.4.1.193.96.115.1.111 | NoderadioFrequencyMismatch | Configured Frequency is not within the restricted frequency range of the installed Radio Unit | ||
| 1.3.6.1.4.1.193.96.115.3.2.5 | NodecellbusFailure | This is sent when a Cellbus has a defect that is longer than 2.5+/-0.5 seconds. | ||
| 1.3.6.1.4.1.193.96.115.3.2.6 | NodefanFailure | Is sent when a fan failure has been detected in the subrack (this could be based on detection of over_temperature in the subrack) An alarm ceasing report (alar… | ||
| 1.3.6.1.4.1.193.96.115.3.2.7 | NodepowerFailure | Is sent when a power failure has been detected in the subrack. An alarm ceasing report (alarm severity = 'cleared') will be sent when an indication that the po… | ||
| 1.3.6.1.4.1.193.96.115.3.3.1 | NodecommunicationLost | Is sent when a the communication to a subrack has been lost. An alarm ceasing report (alarm severity = 'cleared') will be sent when the communication has been … | ||
| 1.3.6.1.4.1.193.96.115.3.3.2 | NodeboardReplaced | Is sent when the insertion of a circuit board that matches the configured data for the slot (but not the serial number) has been detected. | ||
| 1.3.6.1.4.1.193.96.115.3.3.4 | NodeboardRemovedAlarm | Is sent when the removal of a matching circuit board from a slot has been detected. An alarm ceasing report (alarm severity = 'cleared') will be sent when a bo… | ||
| 1.3.6.1.4.1.193.96.115.3.3.6 | NodeboardMismatch | Is sent when the insertion of a circuit board that does not match the configured data for the slot has been detected. An alarm ceasing report (alarm severity =… | ||
| 1.3.6.1.4.1.193.96.115.3.3.7 | NodeboardUnrecognized | Is sent when the insertion of a circuit board in a slot has been detected, but the board ID is not recognizable (or not valid for this system). An alarm ceasin… | ||
| 1.3.6.1.4.1.193.96.115.3.3.8 | NodepowerLoss | Is sent when a power loss occurs at a board. | ||
| 1.3.6.1.4.1.193.96.115.3.3.9 | NodeinterfaceFailure | Is sent when an interface on a board has failed. | ||
| 1.3.6.1.4.1.193.96.115.3.3.12 | NodemacSignonFailed | Sent when the AT which should be signed on is lost. | ||
| 1.3.6.1.4.1.193.96.115.3.4.9 | NodecommunicationError | Is sent when a communication error condition has been entered (or ceased) on a circuit board. The alarm type is by default 'equipment alarm'. | ||
| 1.3.6.1.4.1.193.96.115.3.4.12 | NodestartError | Is sent when a start error condition has been entered (or ceased) on a circuit board. The alarm type is by default 'equipment alarm'. | ||
| 1.3.6.1.4.1.193.96.115.3.4.13 | NodelaserPower | This is sent when a failure of the laser power occurs. | ||
| 1.3.6.1.4.1.193.96.115.3.4.15 | NodedpSoftwareFailure | This is sent if the DP software fails. | ||
| 1.3.6.1.4.1.193.96.115.3.4.16 | NodebufferOverflow | This is sent when a buffer overflows for a while | ||
| 1.3.6.1.4.1.193.96.115.3.4.17 | NodebufferUnderflow | This is sent when a buffer underflows for a while | ||
| 1.3.6.1.4.1.193.96.115.3.4.18 | NodemacModemSwDownloadFailure | the download from the MAC EPROM active or passive towards the passive area of modem has failed | ||
| 1.3.6.1.4.1.193.96.115.3.4.19 | NodedownLoadLmFailed | This is sent when the downloading of a new Load Module (LM) to a Device Processor (DP) fails | ||
| 1.3.6.1.4.1.193.96.115.3.4.20 | NodemacRadioSwDownloadFailure | the download from the MAC EPROM active or passive towards the passive area of radio has failed | ||
| 1.3.6.1.4.1.193.96.115.3.4.21 | NodeincorrectSwVersion | This is sent when a board has been loaded with the incorrect version of software. | ||
| 1.3.6.1.4.1.193.96.115.3.4.22 | NodeloopBackFailure | This is sent when a loopback has failed. | ||
| 1.3.6.1.4.1.193.96.115.3.4.23 | NodevpAis | This is sent when a VP AIS alarm occurs. | ||
| 1.3.6.1.4.1.193.96.115.3.4.24 | NodevpRdi | This is sent when a VP RDI alarm occurs. | ||
| 1.3.6.1.4.1.193.96.115.3.4.25 | NodesoftwareDownloadInProgress | Sent when the board software is being downloaded | ||
| 1.3.6.1.4.1.193.96.115.3.4.26 | NodesoftwareDownloadDone | This is sent when the software is downloaded | ||
| 1.3.6.1.4.1.193.96.115.3.4.27 | NodemsAis | This is sent when Alarm Indication Signal is received for more than 2.5 seconds on a Multiplexer Section. | ||
| 1.3.6.1.4.1.193.96.115.3.4.28 | NodemsRdi | This is sent when Remote Defect Indication is received for more than 2.5 seconds on a Multiplexer Section. | ||
| 1.3.6.1.4.1.193.96.115.3.4.29 | NodepathRdi | This is sent when Remote Defect Indication is received for more than 2.5 seconds on a Path. | ||
| 1.3.6.1.4.1.193.96.115.3.4.30 | NodepathAis | This is sent when Alarm Indication Signal is received for more than 2.5 seconds on a Path. | ||
| 1.3.6.1.4.1.193.96.115.3.4.37 | NodemacControlChannel | No communication with modem processor. | ||
| 1.3.6.1.4.1.193.96.115.3.4.38 | NodemacRclFailure | Unknown RCL command from de-framer. | ||
| 1.3.6.1.4.1.193.96.115.3.4.39 | NodemacCbrOverflow | CBR buffer overflow. | ||
| 1.3.6.1.4.1.193.96.115.3.4.40 | NodemacSwException | Software exception on MAC DP. | ||
| 1.3.6.1.4.1.193.96.115.3.4.41 | NodemacHwException | Hardware exception. | ||
| 1.3.6.1.4.1.193.96.115.3.4.42 | NodemacIncorrSwVersModem | The active loadmodule in the modem contains an incorrect SW version. | ||
| 1.3.6.1.4.1.193.96.115.3.4.43 | NodemacIncorrSwVersRadio | The active loadmodule in the radio contains an incorrect SW version. | ||
| 1.3.6.1.4.1.193.96.115.3.4.44 | NodemacSwdlFromActiveToModemInProgress | the download from the MAC FPROM active towards the passive area of modem is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.3.4.45 | NodemacSwdlFromActiveToRadioInProgress | the download from the MAC FPROM active towards the passive area of modem is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.3.4.46 | NodeatRollbacked | This is sent when the software is downloaded | ||
| 1.3.6.1.4.1.193.96.115.3.4.47 | NodemacSwdlFromPassiveToModemInProgress | the download from the MAC FPROM passive towards the active area of modem is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.3.4.48 | NodemacSwdlFromPassiveToRadioInProgress | the download from the MAC FPROM passive towards the active area of radio is in progress (in Background) | ||
| 1.3.6.1.4.1.193.96.115.3.4.49 | NodemacKeepAliveFail | MAC-Radio Control Communication Link Failure. The ping toward the radio doesn't come back to the mac three consecutive times | ||
| 1.3.6.1.4.1.193.96.115.3.4.50 | NodemacRestart | MAC DP Restarted | ||
| 1.3.6.1.4.1.193.96.115.3.4.51 | NodemacModemRestart | Modem DP Restarted | ||
| 1.3.6.1.4.1.193.96.115.7 | Nodetraps | |||
| 1.3.6.1.4.1.193.96.115.7.1 | ScalaransIdentifier | not-accessible | mandatory | A reference to the affected entity. |
| 1.3.6.1.4.1.193.96.115.7.11 | ScalaralarmingObject | not-accessible | mandatory | The alarming object. Identifies either a variable in the group of variables belonging to the alarming object, or a row in a table representing the alarming obj… |
| 1.3.6.1.4.1.193.96.115.7.12 | ScalaralarmType | not-accessible | mandatory | The type of the alarm. |
| 1.3.6.1.4.1.193.96.115.7.13 | ScalaralarmSeverity | not-accessible | mandatory | The perceived severity of the fault. |
| 1.3.6.1.4.1.193.96.115.7.14 | ScalaralarmTime | not-accessible | mandatory | The time the fault was detected. |
| 1.3.6.1.4.1.193.96.115.7.15 | ScalaralarmInformation | not-accessible | mandatory | Additional information pin-pointing the problem. If not provided, this string shall be of zero length. |
| 1.3.6.1.4.1.193.96.115.7.17 | ScalareventTime | not-accessible | mandatory | The time the event occured. |
| 1.3.6.1.4.1.193.96.115.7.18 | ScalarntId | not-accessible | mandatory | Customer id or network terminal id or radio terminal id |