AP553-MIB
213 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.22.1.2.1 | NodeprobeConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.1 | NodechanConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.1.1 | ScalarlmiOperation | read-write | mandatory | LMI operation, on WEBFLAG Off On WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.1.2 | ScalarlmiDLCI | read-write | mandatory | The DLCI # used for LMI polls, the default value is dlci-0 WEBFLAG DLCI-0 WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.1.3 | ScalaripDLCI | read-write | mandatory | Valid Inband IP DLCI ranges from 16 to 991 |
| 1.3.6.1.4.1.498.22.1.2.1.1.4 | ScalaripEncapp | read-write | mandatory | Defines the IP DLCI Encapsulation method WEBFLAG RAW IETF SNAP WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.1.5 | ScalarchanAggregateRate | read-only | mandatory | Displays the current aggregate channel rate. |
| 1.3.6.1.4.1.498.22.1.2.1.2 | NodelmiConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.2.1 | ScalarlmiType | read-write | mandatory | Defines the network's LMI type. WEBFLAG Annex-A Annex-D WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.2.2 | ScalarlmiN391 | read-write | mandatory | N391 Full Enquiry Interval Counter ranges from 1 to 255, the default value is 6. |
| 1.3.6.1.4.1.498.22.1.2.1.2.3 | ScalarlmiNet392 | read-write | mandatory | N392 Network Interface Down Threshold Counter ranges from 1 to 10, the default value is 3. |
| 1.3.6.1.4.1.498.22.1.2.1.2.4 | ScalarlmiUser392 | read-write | mandatory | N392 User Interface Down Threshold Counter ranges from 1 to 10, the default value is 3. |
| 1.3.6.1.4.1.498.22.1.2.1.2.5 | ScalarlmiNet393 | read-write | mandatory | N393 Network Interface Down Window Counter ranges from 1 to 10, the default value is 4. |
| 1.3.6.1.4.1.498.22.1.2.1.2.6 | ScalarlmiUser393 | read-write | mandatory | N393 User Interface Down Window Counter ranges from 1 to 10, the default value is 4. |
| 1.3.6.1.4.1.498.22.1.2.1.2.7 | Scalart391Timer | read-write | mandatory | T391 Status Poll Interval Timer ranges from 5 to 30, the default value is 10, which would always less than to T392 Timer. |
| 1.3.6.1.4.1.498.22.1.2.1.2.8 | Scalart392Timer | read-write | mandatory | T392 Polling Verification Interval Timer ranges from 5 to 30, the default value is 15 should always be greater than T391 Timer. |
| 1.3.6.1.4.1.498.22.1.2.1.2.9 | ScalarmaxInfoLength | read-write | mandatory | Maximum supported frame information length ranges from 400 to 4000, the default value is 4000. |
| 1.3.6.1.4.1.498.22.1.2.1.3 | NodeproFunConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.3.1 | ScalarunitType | read-write | mandatory | Defines the ap553 as a master or remote unit in the network. This option is used to define the probe(s) installed on the local management network. As a master,… |
| 1.3.6.1.4.1.498.22.1.2.1.3.2 | ScalarprobeMode | read-write | mandatory | Defines the probe mode as a generator, responder, or both or disabled. WEBFLAG Generator Responder Generator & Responder Disabled WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.3.3 | ScalarpollPeriod | read-only | mandatory | Defines the frequency of sending the polling frame by the link probe, from 1 to 60 seconds. pollPeriod applies to all PVCs that are probed. |
| 1.3.6.1.4.1.498.22.1.2.1.3.4 | ScalarglobalTC | read-only | mandatory | This parameter defines the committed rate measurement time interval (in seconds) which can be calculated as Bc/CIR, currently we only allow this value to be 1 … |
| 1.3.6.1.4.1.498.22.1.2.1.3.5 | ScalarpvcCount | read-only | mandatory | PVC count defines the total number of PVCs which are being probed. The value is between 1 to 127. |
| 1.3.6.1.4.1.498.22.1.2.1.3.6 | ScalarprobeTokenSize | read-only | mandatory | Defines the probe token size. |
| 1.3.6.1.4.1.498.22.1.2.1.3.7 | ScalarpvcAdd | write-only | mandatory | This object allows for manual addition of a PVC to the existing PVC table, the added PVC must not exist before it is added. |
| 1.3.6.1.4.1.498.22.1.2.1.3.8 | ScalarpvcDelete | write-only | mandatory | This object allows for manual deletion of a PVC from the existing PVC table, the deleted PVC must exist before it was deleted. |
| 1.3.6.1.4.1.498.22.1.2.1.3.9 | ScalarpvcDiscovery | read-write | mandatory | This object automatically adds PVCs as seen by the LMI protocol. It controls the probe ability to read all pvcs as reported by the LMI process and update the p… |
| 1.3.6.1.4.1.498.22.1.2.1.4 | NodetrapConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.4.1 | ScalarpvcOperStateChangeTrapSeverity | read-write | mandatory | Controls the reporting of and defines the severity of the pvc state change trap which may be sent when a PVC's operational status is changed via the pvcOperati… |
| 1.3.6.1.4.1.498.22.1.2.1.4.2 | ScalarrealTimeTrapSeverity | read-write | mandatory | Controls the reporting of and defines the severity of ALL real time alarm conditions: Channel Load To DTE, Channel Load TO DCE, PVC Load To DCE, PVC Load To DT… |
| 1.3.6.1.4.1.498.22.1.2.1.4.3 | ScalarrealTimeChanLoadToDCEThresh | read-write | mandatory | Defines the maximum allowed real-time channel load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTime… |
| 1.3.6.1.4.1.498.22.1.2.1.4.4 | ScalarrealTimeChanLoadToDCEThreshVar | read-write | mandatory | Defines the variation range for real-time channel load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is… |
| 1.3.6.1.4.1.498.22.1.2.1.4.5 | ScalaravgChanLoadToDCETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.4.6 | ScalaravgChanLoadToDCEThresh | read-write | mandatory | Defines the maximum allowed frame relay channel utilization in a 15 minute period, expressed in percentage. If the actual average utilization is more than this… |
| 1.3.6.1.4.1.498.22.1.2.1.4.7 | ScalarrealTimeChanLoadToDTEThresh | read-write | mandatory | Defines the maximum allowed real-time channel load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTime… |
| 1.3.6.1.4.1.498.22.1.2.1.4.8 | ScalarrealTimeChanLoadToDTEThreshVar | read-write | mandatory | Defines the variation range for real-time channel load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is… |
| 1.3.6.1.4.1.498.22.1.2.1.4.9 | ScalaravgChanLoadToDTETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.4.10 | ScalaravgChanLoadToDTEThresh | read-write | mandatory | Defines the maximum allowed frame relay channel utilization in a 15 minute period, expressed in percentage. If the actual average utilization is more than this… |
| 1.3.6.1.4.1.498.22.1.2.1.4.11 | ScalarrealTimePvcLoadToDCEThresh | read-write | mandatory | Defines the maximum allowed real-time PVC load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrap… |
| 1.3.6.1.4.1.498.22.1.2.1.4.12 | ScalarrealTimePvcLoadToDCEThreshVar | read-write | mandatory | Defines the variation range for real-time PVC load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is mor… |
| 1.3.6.1.4.1.498.22.1.2.1.4.13 | ScalaravgPvcLoadToDCETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.4.14 | ScalaravgPvcLoadToDCEThresh | read-write | mandatory | Defines the maximum allowed PVC load in a 15 minute period, expressed in percentage. If the actual average PVC loading is more than this threshold, an avgPvcLo… |
| 1.3.6.1.4.1.498.22.1.2.1.4.15 | ScalarrealTimePvcLoadToDTEThresh | read-write | mandatory | Defines the maximum allowed real-time PVC load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrap… |
| 1.3.6.1.4.1.498.22.1.2.1.4.16 | ScalarrealTimePvcLoadToDTEThreshVar | read-write | mandatory | Defines the variation range for real-time PVC load, expressed in percentage. If within the current TC interval, the variation of the actual utilization is more… |
| 1.3.6.1.4.1.498.22.1.2.1.4.17 | ScalaravgPvcLoadToDTETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.4.18 | ScalaravgPvcLoadToDTEThresh | read-write | mandatory | Defines the maximum allowed PVC load in a 15 minute period, expressed in percentage. If the actual average utilization is more than this threshold, an avgPvcLo… |
| 1.3.6.1.4.1.498.22.1.2.1.4.19 | ScalarrealTimePvcRoundTripDelayThresh | read-write | mandatory | Defines the maximum allowed real-time PVC round trip delay, calculated every second, expressed in percentage. If the actual load is more than this threshold, a… |
| 1.3.6.1.4.1.498.22.1.2.1.4.20 | ScalarrealTimePvcRoundTripDelayThreshVar | read-write | mandatory | Defines the variation range for real-time PVC round trip delay, expressed in percentage.. If within the current TC interval, the variation of the actual round … |
| 1.3.6.1.4.1.498.22.1.2.1.4.21 | ScalaravgPvcRoundTripDelayTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the 15 minute average round trip delay exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBE… |
| 1.3.6.1.4.1.498.22.1.2.1.4.22 | ScalaravgPvcRoundTripDelayThresh | read-write | mandatory | Defines the maximum allowed PVC round trip delay in a 15 minute period, expressed in percentage. If the actual average PVC round trip delay is more than this t… |
| 1.3.6.1.4.1.498.22.1.2.1.4.23 | ScalaravgPvcNotAvailToDCETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcNotAvailToDCE exception trap. This condition may be reported when the avgPvcNotAvailToDCEThresh obj… |
| 1.3.6.1.4.1.498.22.1.2.1.4.24 | ScalaravgPvcNotAvailToDCEThresh | read-write | mandatory | Defines the maximum allowed average unavailability in a 15 minute period, expressed in percentage. If the actual value is more than this threshold, an avgPvcNo… |
| 1.3.6.1.4.1.498.22.1.2.1.4.25 | ScalaravgPvcNotAvailToDTETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcNotAvailToDTE exception trap. This condition may be reported when the avgPvcNotAvailToDTEThresh obj… |
| 1.3.6.1.4.1.498.22.1.2.1.4.26 | ScalaravgPvcNotAvailToDTEThresh | read-write | mandatory | Defines the maximum allowed average unavailability in a 15 minute period, expressed in percentage. If the actual value is more than this threshold, an avgPvcNo… |
| 1.3.6.1.4.1.498.22.1.2.1.4.27 | ScalaravgPvcFecnFramesTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcFecnFrames exception trap. This condition may be reported when the avgPvcFecnFramesThresh object va… |
| 1.3.6.1.4.1.498.22.1.2.1.4.28 | ScalaravgPvcFecnFramesThresh | read-write | mandatory | Defines the maximum allowed number of FECN frames which may be received in a 15 minute period. |
| 1.3.6.1.4.1.498.22.1.2.1.4.29 | ScalaravgPvcBecnFramesTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcBecnFrames exception trap. This condition may be reported when the avgPvcFecnFramesThresh object va… |
| 1.3.6.1.4.1.498.22.1.2.1.4.30 | ScalaravgPvcBecnFramesThresh | read-write | mandatory | Defines the maximum allowed number of BECN frames which may be received in a 15 minute period. |
| 1.3.6.1.4.1.498.22.1.2.1.4.31 | ScalaravgPvcCIRExceedToDTETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcCIRExceedToDTE exception trap. This trap may be reported if this condition occurs over a 15 minute … |
| 1.3.6.1.4.1.498.22.1.2.1.4.32 | ScalaravgPvcEIRExceedToDTETrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcEIRExceedToDTE exception trap. This trap may be reported if this condition occurs over a 15 minute … |
| 1.3.6.1.4.1.498.22.1.2.1.4.33 | ScalaravgPvcLossFrameTxTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcLossFrameTx exception trap. This trap may be reported if this condition occurs over a 15 minute per… |
| 1.3.6.1.4.1.498.22.1.2.1.4.34 | ScalaravgPvcLossFrameRxTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the avgPvcLossFrameTx exception trap. This trap may be reported if this condition occurs over a 15 minute per… |
| 1.3.6.1.4.1.498.22.1.2.1.4.35 | ScalarnetworkLmiInterfaceDownTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the networkLmiInterfaceDown exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.4.36 | ScalaruserLmiInterfaceDownTrapSeverity | read-write | mandatory | Controls the reporting of and defines severity of the userLmiInterfaceDown exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND |
| 1.3.6.1.4.1.498.22.1.2.1.5 | NodepvcConfig | |||
| 1.3.6.1.4.1.498.22.1.2.1.5.1 | TablepvcCirEirTable | not-accessible | mandatory | PVC table, which lists PVCs for which the statistic data are collected. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1 | RowpvcCirEirEntry | not-accessible | mandatory | Identifies an entry (row) in PVC CIR/EIR table. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.1 | ColumnpvcCirEirTableIndex | read-only | mandatory | Identifies an entry (row) in PVC table. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.2 | ColumnpvcCirToDTE | read-write | mandatory | Defines the committed information rate, in bps, under normal conditions in the direction of to DTE. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.3 | ColumnpvcCirToDCE | read-write | mandatory | Defines the committed information rate, in bps, under normal conditions in the direction of to DCE. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.4 | ColumnpvcEirToDTE | read-write | mandatory | Defines the maximum transfer information rate, in bps, which the network is accepting in the direction of to DTE. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.5 | ColumnpvcEirToDCE | read-write | mandatory | Defines the maximum transfer information rate, in bps, which the network is accepting in the direction of to DCE. |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.6 | ColumnpvcOperation | read-write | mandatory | Defines the monitored state of a PVC. pvcNotProbed - specifies that the PVC will not be probed, round trip delay and frame loss measurements will not be tabula… |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.7 | ColumnpvcState | read-only | mandatory | Reflects the state of the PVC as seen by the probe. `unavailable' indicates that the PVC is not included in the DLCI list. `inactive indicates that the PVC is … |
| 1.3.6.1.4.1.498.22.1.2.1.5.1.1.8 | ColumnpvcIdentifier | read-write | mandatory | Comment field for annotation. |
| 1.3.6.1.4.1.498.22.1.2.1.6 | NodeprobeVersion | |||
| 1.3.6.1.4.1.498.22.1.2.1.6.1 | ScalarfrProbeMIBversion | read-write | mandatory | Identifies the version of the MIB as 'X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z) |
| 1.3.6.1.4.1.498.22.1.2.2 | NodeprobeStat | |||
| 1.3.6.1.4.1.498.22.1.2.2.1 | NodechStCurrent | |||
| 1.3.6.1.4.1.498.22.1.2.2.1.1 | ScalarchCurrDteFrames | read-only | mandatory | Identifies total frames received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.2 | ScalarchCurrDceFrames | read-only | mandatory | Identifies total frames received from DCE device within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.3 | ScalarchCurrDteOctets | read-only | mandatory | Identifies total octets received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.4 | ScalarchCurrDceOctets | read-only | mandatory | Identifies total octets received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.5 | ScalarchCurrLmiTxEnq | read-only | mandatory | Identifies the total number of LMI enquiries sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.6 | ScalarchCurrLmiTxResp | read-only | mandatory | Identifies the total number of LMI responses sent to DTE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.7 | ScalarchCurrLmiRxEnq | read-only | mandatory | Identifies the total number of LMI enquiries from the DTE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.8 | ScalarchCurrLmiRxResp | read-only | mandatory | Identifies the total number of LMI status responses received from the DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.9 | ScalarchCurrDTELmiTimeout | read-only | mandatory | Identifies the total number of lmi timeouts received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.10 | ScalarchCurrDCELmiTimeout | read-only | mandatory | Identifies the total number of lmi timeouts received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.11 | ScalarchCurrFecnFrames | read-only | mandatory | Identifies total number of frames with FECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.12 | ScalarchCurrBecnFrames | read-only | mandatory | Identifies total number of frames with BECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.13 | ScalarchCurrTxIp | read-only | mandatory | Identifies total number of IP packets sent on inband DLCI within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.14 | ScalarchCurrRxIp | read-only | mandatory | Identifies total number of IP packets received on inband DLCI within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.15 | ScalarchCurrTxPoll | read-only | mandatory | Identifies total number of probe polls sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.16 | ScalarchCurrTxResp | read-only | mandatory | Identifies total number of probe responses sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.17 | ScalarchCurrRxPoll | read-only | mandatory | Identifies total number of probe polls received from DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.18 | ScalarchCurrRxResp | read-only | mandatory | Identifies total number of probe responses received from DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.1.19 | ScalarintervalComplete | read-only | mandatory | This object identifies the the percent completeion of the interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2 | TablechStIntervalTable | not-accessible | mandatory | probe statistic table, row 1 to row 96, which defines the time interval for every 15 minutes. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1 | RowchStIntervalEntry | not-accessible | mandatory | Identifies an entry (row) in probe statistic table. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.1 | ColumnchIntvIndex | read-only | mandatory | Identifies an entry (row) in channel statistic table, 1-96 time intervals. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.2 | ColumnchIntvDteFrames | read-only | mandatory | Identifies total frames received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.3 | ColumnchIntvDceFrames | read-only | mandatory | Identifies total frames received from DCE device within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.4 | ColumnchIntvDteOctets | read-only | mandatory | Identifies total octets received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.5 | ColumnchIntvDceOctets | read-only | mandatory | Identifies total octets received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.6 | ColumnchIntvLmiTxEnq | read-only | mandatory | Identifies the total number of LMI enquiries sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.7 | ColumnchIntvLmiTxResp | read-only | mandatory | Identifies the total number of LMI responses send to DTE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.8 | ColumnchIntvLmiRxEnq | read-only | mandatory | Identifies the total number of LMI enquiries received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.9 | ColumnchIntvLmiRxResp | read-only | mandatory | Identifies the total number of LMI status responses received from the DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.10 | ColumnchIntvDTELmiTimeout | read-only | mandatory | Identifies the total number of LMI timeouts received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.11 | ColumnchIntvDCELmiTimeout | read-only | mandatory | Identifies the total number of LMI timeouts received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.12 | ColumnchIntvFecnFrames | read-only | mandatory | Identifies total number of frames with FECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.13 | ColumnchIntvBecnFrames | read-only | mandatory | Identifies total number of frames with BECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.14 | ColumnchIntvTxIp | read-only | mandatory | Identifies total number of IP packets sent on inband DLCI within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.15 | ColumnchIntvRxIp | read-only | mandatory | Identifies total number of IP packets received on inband DLCI within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.16 | ColumnchIntvTxPoll | read-only | mandatory | Identifies total number of probe polls sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.17 | ColumnchIntvTxResp | read-only | mandatory | Identifies total number of probe response sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.18 | ColumnchIntvRxPoll | read-only | mandatory | Identifies total number of probe polls received from DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.2.1.19 | ColumnchIntvRxResp | read-only | mandatory | Identifies total number of probe responses received from DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3 | TablepvcStCurrentTable | not-accessible | mandatory | PVC statistic table. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1 | RowpvcStCurrentEntry | not-accessible | mandatory | Identifies an entry (row) in PVC statistic table |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.1 | ColumnpvcCurrDlciIndex | read-only | mandatory | Index in PVC statistics table, which identifies the PVC number, up to 20 PVCs can exist. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.2 | ColumnpvcCurrDteFrames | read-only | mandatory | Identifies total frames received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.3 | ColumnpvcCurrDceFrames | read-only | mandatory | Identifies total frames received from DCE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.4 | ColumnpvcCurrDteOctets | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.5 | ColumnpvcCurrDceOctets | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.6 | ColumnpvcCurrDteFramesWithDE | read-only | mandatory | Identifies total frames with DE bit set received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.7 | ColumnpvcCurrDceFramesWithDE | read-only | mandatory | Identifies total frames with DE bit set received from DCE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.8 | ColumnpvcCurrFecnFrames | read-only | mandatory | Identifies total number of frames for a specific PVC with FECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.9 | ColumnpvcCurrBecnFrames | read-only | mandatory | Identifies total number of frames for a specific PVC with BECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.10 | ColumnpvcCurrTxPoll | read-only | mandatory | Identifies total number of probe polls sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.11 | ColumnpvcCurrTxResp | read-only | mandatory | Identifies total number of probe responses sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.12 | ColumnpvcCurrRxPoll | read-only | mandatory | Identifies total number of probe polls received from DCE on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.13 | ColumnpvcCurrRxResp | read-only | mandatory | Identifies total number of probe responses received from DCE on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.3.1.14 | ColumnpvcCurrLoopback | read-only | mandatory | Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process. |
| 1.3.6.1.4.1.498.22.1.2.2.4 | TablepvcStIntervalTable | not-accessible | mandatory | PVC statistic interval table: |
| 1.3.6.1.4.1.498.22.1.2.2.4.1 | RowpvcStIntervalEntry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.1 | ColumnpvcIntvDlciIndex | read-only | mandatory | This index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.2 | ColumnpvcIntvIndex | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minutes interval and 96 is the least recently completed 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.3 | ColumnpvcIntvDteFrames | read-only | mandatory | Identifies total frames received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.4 | ColumnpvcIntvDceFrames | read-only | mandatory | Identifies total frames received from DCE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.5 | ColumnpvcIntvDteOctets | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.6 | ColumnpvcIntvDceOctets | read-only | mandatory | Identifies total octets received from DCE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.7 | ColumnpvcIntvDteFramesWithDE | read-only | mandatory | Identifies the frames with DE bit set received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.8 | ColumnpvcIntvDceFramesWithDE | read-only | mandatory | Identifies the frames with DE bit set received from DCE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.9 | ColumnpvcIntvFecnFrames | read-only | mandatory | Identifies total number of frames for a specific PVC with FECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.10 | ColumnpvcIntvBecnFrames | read-only | mandatory | Identifies total number of frames for a specific PVC with BECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.11 | ColumnpvcIntvTxPoll | read-only | mandatory | Identifies total number of probe polls sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.12 | ColumnpvcIntvTxResp | read-only | mandatory | Identifies total number of probe responses sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.13 | ColumnpvcIntvRxPoll | read-only | mandatory | Identifies total number of probe polls received from DCE on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.14 | ColumnpvcIntvRxResp | read-only | mandatory | Identifies total number of probe responses received from DCE on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.498.22.1.2.2.4.1.15 | ColumnpvcIntvLoopback | read-only | mandatory | Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process. |
| 1.3.6.1.4.1.498.22.1.2.3 | NodeprobePerform | |||
| 1.3.6.1.4.1.498.22.1.2.3.1 | NodechanPerfCurr | |||
| 1.3.6.1.4.1.498.22.1.2.3.1.1 | ScalarchPerfCurrUnavailToDte | read-only | mandatory | This object identifies the channel unavailability due to remote DTE fault within the latest 15 minutes. This statistic datum is calculated by the channel unava… |
| 1.3.6.1.4.1.498.22.1.2.3.1.2 | ScalarchPerfCurrUnavailToDce | read-only | mandatory | This object identifies the channel unavailability due to local DTE fault within the latest 15 minutes. This statistic datum is calculated by the channel unavai… |
| 1.3.6.1.4.1.498.22.1.2.3.1.3 | ScalarchPerfCurrTxLoad | read-only | mandatory | channel average user tx load within the latest 15 minutes, this statistic datum is calculated by user data octets sent by the channel within the 15 minutes ove… |
| 1.3.6.1.4.1.498.22.1.2.3.1.4 | ScalarchPerfCurrRxLoad | read-only | mandatory | Channel average user rx load within the latest 15 minutes, this statistic datum is calculated by user data octets received by the channel within the 15 minutes… |
| 1.3.6.1.4.1.498.22.1.2.3.1.5 | ScalarchPerfCurrTotalTxLoad | read-only | mandatory | channel total tx load within the latest 15 minutes, this statistic datum is calculated by the total data octets sent by the channel within the 15 minutes over … |
| 1.3.6.1.4.1.498.22.1.2.3.1.6 | ScalarchPerfCurrTotalRxLoad | read-only | mandatory | channel total rx load within the latest 15 minutes, this statistic datum is calculated by total data octets received by the channel within the 15 minutes over … |
| 1.3.6.1.4.1.498.22.1.2.3.1.7 | ScalarchPerfCurrLoadToDceRealTime | read-only | mandatory | This object displays the channel load tx within current TC ( 1 sec.), this variable is calculated by total octets transmitted over the capacity of this channel. |
| 1.3.6.1.4.1.498.22.1.2.3.1.8 | ScalarchPerfCurrLoadToDteRealTime | read-only | mandatory | This object displays the channel load rx within current TC ( 1 sec.), this variable is calculated by total octets received over the capacity of this channel. |
| 1.3.6.1.4.1.498.22.1.2.3.2 | TablechanPerfIntvTable | not-accessible | mandatory | Probe channel performance table, which displays the performance statistic data based on the probe channel within previous 24 hours. |
| 1.3.6.1.4.1.498.22.1.2.3.2.1 | RowchanPerfIntvEntry | not-accessible | mandatory | Identifies an entry (row) in probe channel performance table. |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.1 | ColumnchPerfIntvIndex | read-only | mandatory | Identifies an entry (row) in historical PVC performance table, total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is th… |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.2 | ColumnchPerfIntvUnavailToDte | read-only | mandatory | This object identifies the channel unavailability due to remote DTE fault within a 15 minutes interval. This statistic datum is calculated by the channel unava… |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.3 | ColumnchPerfIntvUnavailToDce | read-only | mandatory | This object identifies the channel unavailability due to local DTE fault within a 15 minutes interval. This statistic datum is calculated by the channel unavai… |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.4 | ColumnchPerfIntvTxLoad | read-only | mandatory | channel average user tx load within a 15 minutes interval,this statistic datum is calculated by user data octets sent by the channel within the 15 minutes over… |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.5 | ColumnchPerfIntvRxLoad | read-only | mandatory | channel average user rx load within a 15 minutes interval, this statistic datum is calculated by user data octets received by the channel within the 15 minutes… |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.6 | ColumnchPerfIntvTotalTxLoad | read-only | mandatory | channel total tx load within a 15 minutes interval, this statistic datum is calculated by the total data octets sent by the channel within the 15 minutes over … |
| 1.3.6.1.4.1.498.22.1.2.3.2.1.7 | ColumnchPerfIntvTotalRxLoad | read-only | mandatory | Channel total rx load within a 15 minutes interval, this statistic datum is calculated by the total data octets received by the channel within the 15 minutes o… |
| 1.3.6.1.4.1.498.22.1.2.3.3 | TablepvcPerfCurrTable | not-accessible | mandatory | PVC performance table, which displays the performance statistic data based on each PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.3.1 | RowpvcPerfCurrEntry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.1 | ColumnpvcPerfCurrDlciIndex | read-only | mandatory | This index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.2 | ColumnpvcPerfCurrRtd | read-only | mandatory | Probe token average round trip time within the latest 15 minutes for a specific PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.3 | ColumnpvcPerfCurrUnavailToDte | read-only | mandatory | This object identifies the PVC average unavailability within the latest 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the net… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.4 | ColumnpvcPerfCurrUnavailToDce | read-only | mandatory | This object identifies the PVC average unavailability within the latest 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the loc… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.5 | ColumnpvcPerfCurrTxLoad | read-only | mandatory | This object identifies the PVC average user tx load within the latest 15 minutes. This statistic datum is calculated by user data octets sent by a specific PVC… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.6 | ColumnpvcPerfCurrRxLoad | read-only | mandatory | This object identifies the PVC average user rx load within the latest 15 minutes. This statistic datum is calculated by user data octets received by a specific… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.7 | ColumnpvcPerfCurrTotalTxLoad | read-only | mandatory | This object identifies the PVC total tx load within the latest 15 minutes. This statistic datum is calculated by total data octets sent by a specific PVC withi… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.8 | ColumnpvcPerfCurrTotalRxLoad | read-only | mandatory | This object identifies the PVC total rx load within the latest 15 minutes. This statistic datum is calculated by total data octets received by a specific PVC w… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.9 | ColumnpvcPerfCurrCirToNetExceed | read-only | mandatory | This object identifies the number of exceeding CIR times that the network detected within the current interval. The measurement is done for every Tc, and the d… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.10 | ColumnpvcPerfCurrEirToNetExceed | read-only | mandatory | This object identifies the number of exceeding EIR times that the network detected within the current interval. The measurement is done for every Tc, and the d… |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.11 | ColumnpvcPerfCurrTxFrameLoss | read-only | mandatory | This object identifies the percentage of tx loss of frames within the total tx frames for this PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.3.1.12 | ColumnpvcPerfCurrRxFrameLoss | read-only | mandatory | This object identifies the percentage of rx loss of frames within the total rx frames for this PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.4 | TablepvcPerfIntvTable | not-accessible | mandatory | PVC performance interval table, which displays the performance statistic data based on each PVC in previous 24 hours. |
| 1.3.6.1.4.1.498.22.1.2.3.4.1 | RowpvcPerfIntvEntry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.1 | ColumnpvcPerfIntvDlciIndex | read-only | mandatory | This index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.2 | ColumnpvcPerfIntvIndex | read-only | mandatory | Identifies an entry (row) in historical PVC performance table,total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is the… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.3 | ColumnpvcPerfIntvRtd | read-only | mandatory | Probe token average round trip time within a 15 minutes interval for a specific PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.4 | ColumnpvcPerfIntvUnavailToDte | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the network or r… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.5 | ColumnpvcPerfIntvUnavailToDce | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the local DTE fa… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.6 | ColumnpvcPerfIntvTxLoad | read-only | mandatory | This object identifies the PVC average user tx load within a 15 minutes interval. This statistic datum is calculated by user data octets sent by a specific PVC… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.7 | ColumnpvcPerfIntvRxLoad | read-only | mandatory | This object identifies the PVC average user rx load within a 15 minutes interval. This statistic datum is calculated by user data octets received by a specific… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.8 | ColumnpvcPerfIntvTotalTxLoad | read-only | mandatory | This object identifies the PVC total tx load within a 15 minutes interval. This statistic datum is calculated by total data octets sent by a specific PVC withi… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.9 | ColumnpvcPerfIntvTotalRxLoad | read-only | mandatory | This object identifies the PVC total rx load within a 15 minutes interval. This statistic datum is calculated by total data octets received by a specific PVC w… |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.10 | ColumnpvcPerfIntvCirToNetExceed | read-only | mandatory | This object identifies the number of exceeding CIR times that the network detected within an interval. The measurement is done for every Tc, and the direction … |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.11 | ColumnpvcPerfIntvEirToNetExceed | read-only | mandatory | This object identifies the number of exceeding EIR times that the network detected within an interval. The measurement is done for every Tc, and the direction … |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.12 | ColumnpvcPerfIntvTxFrameLoss | read-only | mandatory | This object identifies the percentage of tx loss of frames within the total tx frames for this PVC in this interval. |
| 1.3.6.1.4.1.498.22.1.2.3.4.1.13 | ColumnpvcPerfIntvRxFrameLoss | read-only | mandatory | This object identifies the percentage of rx loss of frames within the total rx frames for this PVC in this interval. |
| 1.3.6.1.4.1.498.22.1.2.3.5 | TablepvcPerfRealTimeTable | not-accessible | mandatory | PVC performance table, which displays the performance statistic data based on each PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.5.1 | RowpvcPerfRealTimeEntry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.498.22.1.2.3.5.1.1 | ColumnpvcPerfRealTimeDlciIndex | read-only | mandatory | This index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.498.22.1.2.3.5.1.2 | ColumnpvcPerfRealTimeRtd | read-only | mandatory | Probe token real time round trip delay in msec. for a PVC, it is calculated every Probe Poll interval (1 to 60 sec.). |
| 1.3.6.1.4.1.498.22.1.2.3.5.1.3 | ColumnpvcPerfRealTimeLoadToDCE | read-only | mandatory | This object displays the PVC load to DCE within current TC ( 1 sec.), this variable is calculated by total octets transmitted to DTE over the CIR of this PVC. |
| 1.3.6.1.4.1.498.22.1.2.3.5.1.4 | ColumnpvcPerfRealTimeLoadToDTE | read-only | mandatory | This object displays the PVC load to DTE within current TC ( 1 sec.), this variable is calculated by total octets transmitted to DCE over the CIR of this PVC. |
| 1.3.6.1.4.1.498.22.1.2.4 | NodetrapStatus | |||
| 1.3.6.1.4.1.498.22.1.2.4.1 | NodealarmStatus | |||
| 1.3.6.1.4.1.498.22.1.2.4.1.1 | ScalaralarmCurrentStatusBitsMap | read-only | mandatory | This parameter is a bitmap for the 6 enterprise specific traps. A bit value of one means the trap is active. A bit value of zero means the trap is clear. 1st b… |
| 1.3.6.1.4.1.498.22.1.2.4.1.2 | TablealarmCurrentStatusTable | not-accessible | mandatory | PVC table which lists PVCs and alarm status. |
| 1.3.6.1.4.1.498.22.1.2.4.1.2.1 | RowalarmStatusEntry | not-accessible | mandatory | Identifies an entry (row) in PVC alarm status table. |
| 1.3.6.1.4.1.498.22.1.2.4.1.2.1.1 | ColumnalarmStatusTableIndex | read-only | mandatory | Identifies an entry (row) in the alarm status table. |
| 1.3.6.1.4.1.498.22.1.2.4.1.2.1.2 | ColumncurrentStatusBitsMap | read-only | mandatory | This parameter is a bitmap for the 14 enterprise specific traps. A bit value of one means the trap is active. A bit value of zero means the trap is clear. 1st … |