AP553LIU-MIB
73 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.22.1.3.1 | NodeliuAdmin | |||
| 1.3.6.1.4.1.498.22.1.3.1.1 | Scalarap553MIBversion | read-only | mandatory | Identifies the version of the MIB as `X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z) Upon… |
| 1.3.6.1.4.1.498.22.1.3.2 | NodeliuCsuNetCfg | |||
| 1.3.6.1.4.1.498.22.1.3.2.1 | Scalarap553NetSetFrameType | read-write | mandatory | Defines the line interface framing type as follows: `esf' sets extended superframe format, `d4' sets D4 framing format, `auto' instructs the unit to determine … |
| 1.3.6.1.4.1.498.22.1.3.2.2 | Scalarap553NetOperFrameType | read-only | mandatory | Identifies the line interface framing type acquired by the unit as defined by the `ap553NetSetFrameType' object as follows: `esf' indicates extended superframe… |
| 1.3.6.1.4.1.498.22.1.3.2.3 | Scalarap553NetEsfMode | read-write | mandatory | Defines the use of the Facilities Data Link as follows: `ansi_T1_403' defines the FDL exchange per ANSI specification, `tr-54016' defines the FDL exchange as E… |
| 1.3.6.1.4.1.498.22.1.3.2.4 | Scalarap553NetLineCoding | read-write | mandatory | Defines the Zero Code Suppression mechanism for the interface. `b8zs' defines the use of a specified pattern of normal bits and bipolar violations used to repl… |
| 1.3.6.1.4.1.498.22.1.3.2.5 | Scalarap553NetIntfType | read-write | mandatory | Defines the operating mode of the interface, and the attenuation or gain. The following values specify operation as a standard DS1 interface, with the specifie… |
| 1.3.6.1.4.1.498.22.1.3.2.6 | Scalarap553NetDS1IntfRcvLevel | read-only | mandatory | Identifies the Network Interface Receive level for a DS1 type interface. `noSignal' indicates that no T1 signal is detected on the interface, (the `NS' LED on … |
| 1.3.6.1.4.1.498.22.1.3.3 | NodeliuDsuCfg | |||
| 1.3.6.1.4.1.498.22.1.3.3.1 | Scalarap553DS0AllocationScheme | read-write | mandatory | Defines the DSU DS0 allocation scheme. `consecutive' specifies DSU data passed in contiguous DS0 cell assignments as specified by the ap553StartingDS0 and ap55… |
| 1.3.6.1.4.1.498.22.1.3.3.2 | Scalarap553DS0Fmt | read-write | mandatory | Defines the DS0 base rate as either 56K or 64K bits per second. This object value, in conjunction with the ap553NumDS0s object value determines the LIU aggrega… |
| 1.3.6.1.4.1.498.22.1.3.3.3 | Scalarap553StartingDS0 | read-write | mandatory | Defines the starting DS0 number for the bundle of DS0s used for the LIU aggregate bandwidth. Values of 1-24 are valid when ap553DS0AllocationScheme is consecut… |
| 1.3.6.1.4.1.498.22.1.3.3.4 | Scalarap553NumDS0s | read-write | mandatory | Defines the number of DS0 cells used for passing DSU data. When ap553DS0AllocationScheme is consecutive, valid values are 1 - N where N <= (25 - ap553StartingD… |
| 1.3.6.1.4.1.498.22.1.3.3.5 | Scalarap553LIUAggregateRate | read-only | mandatory | Displays the current aggregate LIU data rate as: ` aggRate Kbps ' with values ranging from ` 56 Kbps ' to ` 1536 Kbps ', where aggregate rate is calculated as … |
| 1.3.6.1.4.1.498.22.1.3.3.6 | Scalarap553SystemStatus | read-write | mandatory | The System Status option. When enabled, allows the DSU to clamp DSR upon receiving the following Network codes: 1. Out of Service Code (OOS) 2. Abnormal Statio… |
| 1.3.6.1.4.1.498.22.1.3.3.7 | Scalarap553CircuitAssurance | read-write | mandatory | The Circuit Assurance option. When enabled, allows the DSU to clamp CTS upon receiving the following Network codes: 1. IDLE(no DCD) 2. Out of Service Code (OOS… |
| 1.3.6.1.4.1.498.22.1.3.3.8 | Scalarap553InbandLoop | read-write | mandatory | The Inband Loop Control option. Defines the DSU response to Inband Line Loopback codes as follows: inhibit - the DSU does not respond to in-band T1 loop codes … |
| 1.3.6.1.4.1.498.22.1.3.4 | NodeliuNetAlarmCfg | |||
| 1.3.6.1.4.1.498.22.1.3.4.1 | Scalarap553NetBpvTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Bipolar Violations Alarm when this event occurs and meets the window & threshold requirements fo… |
| 1.3.6.1.4.1.498.22.1.3.4.2 | Scalarap553NetBpvWindow | read-write | mandatory | Specifies the sampling window in which to report the Network Bipolar Violations alarm condition as active. All other values specify the size of the sampling wi… |
| 1.3.6.1.4.1.498.22.1.3.4.3 | Scalarap553NetBpvThresh | read-write | mandatory | Specifies the threshold of events to be exceeded for reporting the Network Bipolar Violations alarm condition. WEBFLAG 1 10 100 1,000 10,000 WEBEND |
| 1.3.6.1.4.1.498.22.1.3.4.4 | Scalarap553NetCrcTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Cyclical Redundancy Check Alarm when this event occurs and meets the window and threshold requir… |
| 1.3.6.1.4.1.498.22.1.3.4.5 | Scalarap553NetCrcWindow | read-write | mandatory | Specifies the sampling window in which to report the Network Cyclical Redundancy Check alarm condition as active. All other values specify the size of the samp… |
| 1.3.6.1.4.1.498.22.1.3.4.6 | Scalarap553NetCrcThresh | read-write | mandatory | Specifies the threshold of events to be exceeded for reporting the Network Cyclical Redundancy Check alarm condition. WEBFLAG 1 10 100 1,000 10,000 WEBEND |
| 1.3.6.1.4.1.498.22.1.3.4.7 | Scalarap553NetLadTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Low Average Density Alarm when this event occurs and meets the window and threshold requirements… |
| 1.3.6.1.4.1.498.22.1.3.4.8 | Scalarap553NetLadWindow | read-write | mandatory | Specifies the sampling window in which to report the Network Low Average Density alarm condition as active. All other values specify the size of the sampling w… |
| 1.3.6.1.4.1.498.22.1.3.4.9 | Scalarap553NetLadThresh | read-write | mandatory | Specifies the threshold of events to be exceeded for reporting the Network Low Average Density alarm condition. WEBFLAG 1 10 100 1,000 10,000 WEBEND |
| 1.3.6.1.4.1.498.22.1.3.4.10 | Scalarap553NetAisTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Alarm Indication Signal Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warni… |
| 1.3.6.1.4.1.498.22.1.3.4.11 | Scalarap553NetLosTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Loss of Signal Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warning Info W… |
| 1.3.6.1.4.1.498.22.1.3.4.12 | Scalarap553NetOofTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Out of Frame Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warning Info WEB… |
| 1.3.6.1.4.1.498.22.1.3.4.13 | Scalarap553NetRcdYelTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Received Yellow Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warning Info … |
| 1.3.6.1.4.1.498.22.1.3.4.14 | Scalarap553NetUssTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Network Unavailable Signal State Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warn… |
| 1.3.6.1.4.1.498.22.1.3.5 | NodeliuDiagnostics | |||
| 1.3.6.1.4.1.498.22.1.3.5.1 | Scalarap553DiagT1Test | read-write | mandatory | Specifies the test to be executed, or stops the current test. |
| 1.3.6.1.4.1.498.22.1.3.5.2 | Scalarap553DiagTestDuration | read-write | mandatory | Defines the length of all LIU diagnostic tests. |
| 1.3.6.1.4.1.498.22.1.3.5.3 | Scalarap553DiagTestStatus | read-only | mandatory | Displays the test in progress, if any. |
| 1.3.6.1.4.1.498.22.1.3.6 | NodeliuStatus | |||
| 1.3.6.1.4.1.498.22.1.3.6.1 | Scalarap553LedStatus | read-only | mandatory | A bitwise snapshot of the front panel LED states, where 0 = LED off and 1 = LED on, as follows: LED description Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit… |
| 1.3.6.1.4.1.498.22.1.3.6.2 | Scalarap553PortStatus | read-only | mandatory | A bitwise snapshot of interface port status conditions and EIA signals, where 0 = condition not present, and 1 = condition present, as follows: Octet 1 - NETWO… |
| 1.3.6.1.4.1.498.22.1.3.6.3 | Scalarap553PortFrameCounts | read-only | mandatory | The total number of frames transmitted and received on each interface port. This object will be reset to zero after a read, and after power up, soft reset, or … |
| 1.3.6.1.4.1.498.22.1.3.7 | NodeliuCurrentStats | |||
| 1.3.6.1.4.1.498.22.1.3.7.1 | Scalarap553CurrentIntervalCompletion | read-only | mandatory | The elapsed time into the current interval expressed as a percent of completion from 0 to 100%. When the current Line Stats interval is complete (15 minutes), … |
| 1.3.6.1.4.1.498.22.1.3.7.2 | Scalarap553CurrentErroredSeconds | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.3 | Scalarap553CurrentSeverelyErroredSeconds | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.4 | Scalarap553CurrentBurstyErroredSeconds | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.5 | Scalarap553CurrentCrcErrors | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.6 | Scalarap553CurrentUnavailableSeconds | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.7 | Scalarap553CurrentLossOfFrameErrors | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.8 | Scalarap553CurrentBipolarViolationsErrors | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.7.9 | Scalarap553CurrentLossOfSignalErrors | read-only | mandatory | The Line statistics for the current 15 minute interval, also specifies the percent completion of this interval. When the current Line Stats interval time is co… |
| 1.3.6.1.4.1.498.22.1.3.8 | NodeliuTotalStats | |||
| 1.3.6.1.4.1.498.22.1.3.8.1 | Scalarap553TotalErroredSeconds | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.2 | Scalarap553TotalSeverelyErroredSeconds | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.3 | Scalarap553TotalBurstyErroredSeconds | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.4 | Scalarap553TotalCrcErrors | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.5 | Scalarap553TotalUnavailableSeconds | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.6 | Scalarap553TotalLossOfFrameErrors | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.7 | Scalarap553TotalBipolarViolationsErrors | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.8.8 | Scalarap553TotalLossOfSignalErrors | read-only | mandatory | The line statistics totals of the valid Line Statistics Interval objects as specified by the ap553ValidHistoryIntervals object value. This object will be reset… |
| 1.3.6.1.4.1.498.22.1.3.9 | NodeliuHistoryStats | |||
| 1.3.6.1.4.1.498.22.1.3.9.1 | Scalarap553ValidHistoryIntervals | read-only | mandatory | The number of 15 minute intervals for which line statistics data has been collected. The value will be 96 unless the interface was brought on-line within the l… |
| 1.3.6.1.4.1.498.22.1.3.9.2 | Tableap553LineStats24hrHistoryTable | not-accessible | mandatory | The ap553 Line Statistics 24 hour history table. This table is comprised of 96 objects, each of which hold T1 Line statistics data for a 15 minute time period.… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1 | Rowap553HistoryEntry | not-accessible | mandatory | An entry in the Line Statistics 24 hour history table. |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.1 | Columnap553HistoryInterval | read-only | mandatory | Identifies the relative time period of this data. Interval #1 is the most recent historical 15 minute period. Interval #96 is the oldest 15 minute time period … |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.2 | Columnap553ErroredSecondsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.3 | Columnap553SeverelyErroredSecondsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.4 | Columnap553BurstyErroredSecondsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.5 | Columnap553CrcErrorsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.6 | Columnap553UnavailableSecondsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.7 | Columnap553LossOfFrameErrorsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.8 | Columnap553BipolarViolationsErrorsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |
| 1.3.6.1.4.1.498.22.1.3.9.2.1.9 | Columnap553LossOfSignalErrorsData | read-only | mandatory | The Line Statistics Data for a 15 minute historical period within the last 24 hours, as specified by the ap553HistoryInterval. This object will be reset to zer… |