APERTUS-TNSERVER-MIB
296 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.543 | Nodeapertus | |||
| 1.3.6.1.4.1.543.3 | Nodeexpress | |||
| 1.3.6.1.4.1.543.3.1 | NodeaperTnServMIB | |||
| 1.3.6.1.4.1.543.3.1.1 | ScalaraperTnServMibVersionNumber | read-only | mandatory | The version number of this MIB. The version of the MIB which matches the description in this document is 1. |
| 1.3.6.1.4.1.543.3.1.2 | NodeaperTnServAdm | |||
| 1.3.6.1.4.1.543.3.1.2.1 | NodeaperTnServAdmGen | |||
| 1.3.6.1.4.1.543.3.1.2.1.1 | ScalaraperTnServAdmRelease | read-only | mandatory | Release level of the TNSERVER. This is contained in three components. The first version of the product will have a release level of '2.2.0' |
| 1.3.6.1.4.1.543.3.1.2.1.2 | ScalaraperTnServAdmSCN | read-only | mandatory | The Source Control Number of the TNSERVER product. This number helps to identify what patches have been applied to product since installation. |
| 1.3.6.1.4.1.543.3.1.2.1.3 | ScalaraperTnServAdmServerInstanceName | read-only | mandatory | The EXPRESS telnet server Domain Name. |
| 1.3.6.1.4.1.543.3.1.2.1.4 | ScalaraperTnServAdmMaxSessions | read-only | mandatory | Maximum number of sessions currently licensed for the TNSERVER. This includes 3270 and 5250 sessions, as well as all SNA sessions |
| 1.3.6.1.4.1.543.3.1.2.1.5 | ScalaraperTnServAdmKeepAliveTimer | read-only | mandatory | The number of minutes for the keep-alive timer. The value zero indicates no keep-alive timer is configured. |
| 1.3.6.1.4.1.543.3.1.2.1.6 | ScalaraperTnServAdmKeepAliveResponseTimeout | read-only | mandatory | The number of seconds the server will wait for keep-alive response when testing for dead socket. |
| 1.3.6.1.4.1.543.3.1.2.1.7 | ScalaraperTnServAdmKeepAliveRetryCount | read-only | mandatory | The number of keep-alive polls permitted until a socket is considered dead. After this many retries, the socket will be terminated. |
| 1.3.6.1.4.1.543.3.1.2.1.8 | ScalaraperTnServAdmDefaultInactivityLimit | read-only | mandatory | The number of minutes allowed for an idle session, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is no … |
| 1.3.6.1.4.1.543.3.1.2.1.9 | ScalaraperTnServAdmUndefinedClients | read-only | mandatory | Indicates whether the TNSERVER will reject connection requests from clients whose IP address is not contained in the Client Routing Table. If the value is prom… |
| 1.3.6.1.4.1.543.3.1.2.1.10 | ScalaraperTnServAdmAllowableNameTypes | read-only | mandatory | What type of destination name types are allowed as device names specified in telnet client connect requests. The value user(2) indicates that only Client Conne… |
| 1.3.6.1.4.1.543.3.1.2.1.11 | ScalaraperTnServAdmNumPorts | read-only | mandatory | The number of TCP ports on which the TNSERVER is listening for incoming telnet client connections. |
| 1.3.6.1.4.1.543.3.1.2.1.12 | TableaperTnServAdmPortTable | not-accessible | mandatory | Table of ports. |
| 1.3.6.1.4.1.543.3.1.2.1.12.1 | RowaperTnServAdmPortEntry | not-accessible | mandatory | This table contains TCP/IP ports. The OID of the instance actually contains the port number. That is, if the three ports 23, 7713 and 3050 are in the list, the… |
| 1.3.6.1.4.1.543.3.1.2.1.12.1.1 | ColumnaperTnServAdmPort | read-only | mandatory | A TCP/IP port |
| 1.3.6.1.4.1.543.3.1.2.1.13 | ScalaraperTnServAdmMenuMode | read-only | mandatory | When a telnet client specifies a device name that contains a choice of destinations, this variable indicates the action of the server. If on(1), then the clien… |
| 1.3.6.1.4.1.543.3.1.2.1.14 | ScalaraperTnServAdmPasswordLimit | read-only | mandatory | The number of times an invalid password will be allowed to be entered before the Telnet Client Connection Profile will be marked as invalid. The value 0 indica… |
| 1.3.6.1.4.1.543.3.1.2.1.15 | ScalaraperTnServAdmNumGroups | read-only | mandatory | The number of Telnet Group Connection Profiles, i.e. the number of rows in aperTnServAdmGroupTable. |
| 1.3.6.1.4.1.543.3.1.2.1.16 | ScalaraperTnServAdmGroupTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| 1.3.6.1.4.1.543.3.1.2.1.17 | TableaperTnServAdmGroupTable | not-accessible | mandatory | Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.1.17.1 | RowaperTnServAdmGroupEntry | not-accessible | mandatory | This table contains information for Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.1 | ColumnaperTnServAdmGroupName | read-only | mandatory | The name of the Telnet Group Connection Profile. |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.2 | ColumnaperTnServAdmGroupDescription | read-only | mandatory | A short description of the Telnet Group Connection Profile. |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.3 | ColumnaperTnServAdmGroupMenuMode | read-only | mandatory | This variable indicates whether the TNSERVER will assign a device when a choice of devices fit the requested session service or if the telnet client will be pr… |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.4 | ColumnaperTnServAdmGroupInactivityLimit | read-only | mandatory | The number of minutes allowed for an idle connection, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is … |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.5 | ColumnaperTnServAdmGroup3270StatusKey | read-only | mandatory | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists th… |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.6 | ColumnaperTnServAdmGroup3270PasswordKey | read-only | mandatory | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows … |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.7 | ColumnaperTnServAdmGroup3270SysReqKey | read-only | mandatory | The Aid key which is to be interpreted as the 3270 SYS_REQ key. This feature is useful for telnet clients incapable of generating the SYS_REQ key. Of course, t… |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.8 | ColumnaperTnServAdmGroup3270AttnKey | read-only | mandatory | The Aid key which is to be interpreted as the 3270 Attention key. This feature is useful for telnet clients incapable of generating the Attention key. Of cours… |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.9 | ColumnaperTnServAdmGroup5250StatusKey | read-only | mandatory | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists th… |
| 1.3.6.1.4.1.543.3.1.2.1.17.1.10 | ColumnaperTnServAdmGroup5250PasswordKey | read-only | mandatory | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows … |
| 1.3.6.1.4.1.543.3.1.2.1.18 | ScalaraperTnServAdmNumUsers | read-only | mandatory | The number of Telnet User Connection Profiles, i.e. the number of rows in aperTnServAdmUserTable. |
| 1.3.6.1.4.1.543.3.1.2.1.19 | ScalaraperTnServAdmUserTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| 1.3.6.1.4.1.543.3.1.2.1.20 | TableaperTnServAdmUserTable | not-accessible | mandatory | Telnet User Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1 | RowaperTnServAdmUserEntry | not-accessible | mandatory | This table contains information for Telnet User Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.1 | ColumnaperTnServAdmUserName | read-only | mandatory | The name of the Telnet User Connection Profile. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.2 | ColumnaperTnServAdmUserDescription | read-only | mandatory | A short description of the Telnet User Connection Profile. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.3 | ColumnaperTnServAdmUserPasswordRequired | read-only | mandatory | If this variable is yes(1), then a telnet client will be prompted for a password when trying to connect to the TNSERVER using the name of the user profile. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.4 | ColumnaperTnServAdmUserEncryptedPassword | read-only | mandatory | The password of the user encrypted to an integer. |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.5 | ColumnaperTnServAdmUserBadPasswordCounter | read-only | mandatory | The number of consecutive attempts of a telnet client to access the TNSERVER with this user name but with an incorrect password. A correct password will always… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.6 | ColumnaperTnServAdmUserMenuMode | read-only | mandatory | This variable indicates whether the TNSERVER will assign a device when a choice of devices fit the requested session service or if the telnet client will be pr… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.7 | ColumnaperTnServAdmUserInactivityLimit | read-only | mandatory | The number of minutes allowed for an idle connection, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is … |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.8 | ColumnaperTnServAdmUser3270StatusKey | read-only | mandatory | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists th… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.9 | ColumnaperTnServAdmUser3270PasswordKey | read-only | mandatory | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows … |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.10 | ColumnaperTnServAdmUser3270SysReqKey | read-only | mandatory | The Aid key which is to be interpreted as the 3270 SYS_REQ key. This feature is useful for telnet clients incapable of generating the SYS_REQ key. Of course, t… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.11 | ColumnaperTnServAdmUser3270AttnKey | read-only | mandatory | The Aid key which is to be interpreted as the 3270 Attention key. This feature is useful for telnet clients incapable of generating the Attention key. Of cours… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.12 | ColumnaperTnServAdmUser5250StatusKey | read-only | mandatory | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists th… |
| 1.3.6.1.4.1.543.3.1.2.1.20.1.13 | ColumnaperTnServAdmUser5250PasswordKey | read-only | mandatory | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows … |
| 1.3.6.1.4.1.543.3.1.2.1.21 | ScalaraperTnServAdmNumRoutingEntries | read-only | mandatory | The number of Telnet Client Routing Entries, i.e. the number of rows in aperTnServAdmRoutingTable. |
| 1.3.6.1.4.1.543.3.1.2.1.22 | ScalaraperTnServAdmRoutingTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| 1.3.6.1.4.1.543.3.1.2.1.23 | TableaperTnServAdmRoutingTable | not-accessible | mandatory | Telnet Client Routing Table. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1 | RowaperTnServAdmRoutingEntry | not-accessible | mandatory | This table contains information for Telnet Client Routing Entries. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.1 | ColumnaperTnServAdmRoutingSourceIp | read-only | mandatory | This string identifies the IP address (or set of IP addresses) where a telnet client connection request may originate. This column and other columns in the row… |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.2 | ColumnaperTnServAdmRoutingPort | read-only | mandatory | The Server Port on which this connection request will arrive. Negative one means 'any port'. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.3 | ColumnaperTnServAdmRoutingDeviceType | read-only | mandatory | The type of device connecting to the server. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.4 | ColumnaperTnServAdmRoutingModelType | read-only | mandatory | If the requested device type is a 3270 display, then this variable specifies the 3270 model type requested by the telnet client. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.5 | ColumnaperTnServAdmRoutingDescription | read-only | mandatory | A description of the Telnet Client Routing Entry. |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.6 | ColumnaperTnServAdmRoutingDestinationType | read-only | mandatory | This column describes what type of names are contained in the aperTnServAdmRoutingDestination. The value user(1) specifies a Telnet Client Connection Profile. … |
| 1.3.6.1.4.1.543.3.1.2.1.23.1.7 | ColumnaperTnServAdmRoutingDestination | read-only | mandatory | This string specifies a name or a list of names, which determine the possible destinations for the telnet client. For 3270 sessions, if more than one name is l… |
| 1.3.6.1.4.1.543.3.1.2.1.24 | ScalaraperTnServAdmNumSecurAccEntries | read-only | mandatory | The number of Telnet Client Security Access Entries, i.e. the number of rows in aperTnServAdmSecurAccTable. |
| 1.3.6.1.4.1.543.3.1.2.1.25 | ScalaraperTnServAdmSecurAccTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| 1.3.6.1.4.1.543.3.1.2.1.26 | TableaperTnServAdmSecurAccTable | not-accessible | mandatory | Telnet Client Security Access Table. |
| 1.3.6.1.4.1.543.3.1.2.1.26.1 | RowaperTnServAdmSecurAccEntry | not-accessible | mandatory | This table contains information for Telnet Client Security Access Entries. |
| 1.3.6.1.4.1.543.3.1.2.1.26.1.1 | ColumnaperTnServAdmSecurAccSourceIp | read-only | mandatory | This string identifies the IP address (or set of IP addresses) where a telnet client connection request may originate. This column and other columns in the row… |
| 1.3.6.1.4.1.543.3.1.2.1.26.1.2 | ColumnaperTnServAdmSecurAccDescription | read-only | mandatory | A description of the Telnet Client Security Access Entry. |
| 1.3.6.1.4.1.543.3.1.2.1.26.1.3 | ColumnaperTnServAdmSecurAccDestination | read-only | mandatory | This string specifies a name or a list of names. If a telnet client whose IP address matches the index of this row uses a device name other than one in this li… |
| 1.3.6.1.4.1.543.3.1.2.2 | NodeaperTnServAdm3270 | |||
| 1.3.6.1.4.1.543.3.1.2.2.1 | ScalaraperTnServAdm3270DefaultStatusKey | read-only | mandatory | The default 3270 AID key used by clients to display information about the tn3270 session. none(1) indicates that this function is not available. |
| 1.3.6.1.4.1.543.3.1.2.2.2 | ScalaraperTnServAdm3270DefaultSysReqKey | read-only | mandatory | The default 3270 AID key used by non-TN3270E clients to simulate the 3270 SYSREQ function. none(1) indicates that this function is not available. |
| 1.3.6.1.4.1.543.3.1.2.2.3 | ScalaraperTnServAdm3270DefaultAttnKey | read-only | mandatory | The default 3270 AID key used by non-TN3270E clients to simulate the 3270 ATTN function. none(1) indicates that this function is not available. |
| 1.3.6.1.4.1.543.3.1.2.2.4 | ScalaraperTnServAdm3270DefaultPasswordKey | read-only | mandatory | The default 3270 AID key used by clients to change the password of the Telnet User Connection Profile used by an active tn3270 session. none(1) indicates that … |
| 1.3.6.1.4.1.543.3.1.2.2.5 | ScalaraperTnServAdm3270LoadBalanceMode | read-only | mandatory | The load balance selection criteria used when the TNSERVER is making a choice of a destination from several that satisfy client connection request. links(1) in… |
| 1.3.6.1.4.1.543.3.1.2.2.6 | ScalaraperTnServAdm3270NumSessions | read-only | mandatory | The number of Telnet 3270 display and printer Session Profiles, i.e. the number of rows in aperTnServAdm3270SessionTable. |
| 1.3.6.1.4.1.543.3.1.2.2.7 | ScalaraperTnServAdm3270SessionTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the 3270 session table. This variable can be used to facilitate monitoring of the 3270 session t… |
| 1.3.6.1.4.1.543.3.1.2.2.8 | TableaperTnServAdm3270SessionTable | not-accessible | mandatory | Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1 | RowaperTnServAdm3270SessionEntry | not-accessible | mandatory | This table contains information for Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.1 | ColumnaperTnServAdm3270SessionGroupOrUserName | read-only | mandatory | The name of the user (or group) connection profile for the session defined. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.2 | ColumnaperTnServAdm3270SessionName | read-only | mandatory | The name of the 3270 session. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.3 | ColumnaperTnServAdm3270SessionDescription | read-only | mandatory | A description of the 3270 session. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.4 | ColumnaperTnServAdm3270SessionGroupOrUser | read-only | mandatory | This value specifies whether the session is a group session, i.e. one available to any user related to that group, or a user session, i.e. defined for a specif… |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.5 | ColumnaperTnServAdm3270SessionType | read-only | mandatory | Specifies the type of 3270 session - terminal vs. printer. |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.6 | ColumnaperTnServAdm3270SessionModel | read-only | mandatory | If the type of session is a terminal, this variable specifies the model number of the 3270 session. dynamic(5) means that the model size will be set by the cli… |
| 1.3.6.1.4.1.543.3.1.2.2.8.1.7 | ColumnaperTnServAdm3270SessionDestination | read-only | mandatory | This string specifies a name or a list of names, which determine the possible destinations for the telnet 3270 client. If more than one name is listed, then th… |
| 1.3.6.1.4.1.543.3.1.2.3 | NodeaperTnServAdm5250 | |||
| 1.3.6.1.4.1.543.3.1.2.3.1 | ScalaraperTnServAdm5250DefaultStatusKey | read-only | mandatory | The default 5250 AID key used by clients to display information about the tn5250 session. none(1) indicates that this function is not available. |
| 1.3.6.1.4.1.543.3.1.2.3.2 | ScalaraperTnServAdm5250DefaultPasswordKey | read-only | mandatory | The default 5250 AID key used by clients to change the password of the Telnet User Connection Profile used by an active tn5250 session. none(1) indicates that … |
| 1.3.6.1.4.1.543.3.1.2.3.3 | ScalaraperTnServAdm5250NumSessions | read-only | mandatory | The number of Telnet 5250 display and printer Session Profiles, i.e. the number of rows in aperTnServAdm5250SessionTable. |
| 1.3.6.1.4.1.543.3.1.2.3.4 | ScalaraperTnServAdm5250SessionTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the 5250 session table. This variable can be used to facilitate monitoring of the 5250 session t… |
| 1.3.6.1.4.1.543.3.1.2.3.5 | TableaperTnServAdm5250SessionTable | not-accessible | mandatory | Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1 | RowaperTnServAdm5250SessionEntry | not-accessible | mandatory | This table contains information for Telnet Group Connection Profiles. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.1 | ColumnaperTnServAdm5250SessionGroupOrUserName | read-only | mandatory | The name of the user (or group) connection profile for the session defined. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.2 | ColumnaperTnServAdm5250SessionName | read-only | mandatory | The name of the 5250 session. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.3 | ColumnaperTnServAdm5250SessionDescription | read-only | mandatory | A description of the 5250 session. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.4 | ColumnaperTnServAdm5250SessionGroupOrUser | read-only | mandatory | This value specifies whether the session is a group session, i.e. one available to any user related to that group, or a user session, i.e. defined for a specif… |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.5 | ColumnaperTnServAdm5250SessionAutoSignon | read-only | mandatory | This variable specifies whether automatic signon is enabled. If it is, then the 5250 passthrough session uses automatic signon. This feature can be used to byp… |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.6 | ColumnaperTnServAdm5250SessionRemoteUser | read-only | mandatory | If automatic signon is enabled, this variables specifies the name of the 5250 user as defined on the remote system. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.7 | ColumnaperTnServAdm5250SessionInitialMenu | read-only | mandatory | If automatic signon is enabled, this variables specifies the name of the 5250 initial menu on the remote system. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.8 | ColumnaperTnServAdm5250SessionInitialProgram | read-only | mandatory | If automatic signon is enabled, this variables specifies the name of the 5250 initial program on the remote system. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.9 | ColumnaperTnServAdm5250SessionInitialLibrary | read-only | mandatory | If automatic signon is enabled, this variables specifies the name of the 5250 initial library on the remote system. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.10 | ColumnaperTnServAdm5250SessionAutoDeviceConfiguration | read-only | mandatory | Specifies whether 5250 passthrough automatic device configuration is supported on the 5250 system that to which the telnet client is connecting. If the value i… |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.11 | ColumnaperTnServAdm5250SessionVirtualDeviceOrController | read-only | mandatory | If automatic device configuration is not supported for this 5250 session, then this variable specifies whether the supplied name is a device name or a controll… |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.12 | ColumnaperTnServAdm5250SessionVirtualDeviceOrControllerName | read-only | mandatory | If automatic device configuration is not supported for this 5250 session, then this variable specifies the name of the device or controller. |
| 1.3.6.1.4.1.543.3.1.2.3.5.1.13 | ColumnaperTnServAdm5250SessionDestination | read-only | mandatory | This string specifies a name or a list of names, which determine the possible destinations for the telnet 5250 client. If more than one name is listed, then th… |
| 1.3.6.1.4.1.543.3.1.3 | NodeaperTnServOper | |||
| 1.3.6.1.4.1.543.3.1.3.1 | NodeaperTnServOperGen | |||
| 1.3.6.1.4.1.543.3.1.3.1.1 | ScalaraperTnServOperStatus | read-only | mandatory | Status of the TNSERVER. Currently this value is read-only. When sets are supported, this variable will be used to change the state of the server. |
| 1.3.6.1.4.1.543.3.1.3.1.2 | ScalaraperTnServOperActiveSessions | read-only | mandatory | Number of SNA sessions currently active. In particular, it is the number of 3270 LU's assigned to devices plus the number of LU6.2 LU-LU sessions. |
| 1.3.6.1.4.1.543.3.1.3.1.3 | ScalaraperTnServOperUpTime | read-only | mandatory | This value represents the time elapsed since the server was started in units of 1/100th of a second. |
| 1.3.6.1.4.1.543.3.1.3.2 | NodeaperTnServOperConns | |||
| 1.3.6.1.4.1.543.3.1.3.2.1 | ScalaraperTnServOperConnsNumActive | read-only | mandatory | The number of active 3270 and 5250 telnet connections, i.e. the number of rows in aperTnServOperConnsTable. |
| 1.3.6.1.4.1.543.3.1.3.2.2 | ScalaraperTnServOperConnsTableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the connection table. This variable can be used to facilitate monitoring of the connection table. |
| 1.3.6.1.4.1.543.3.1.3.2.3 | TableaperTnServOperConnsTable | not-accessible | mandatory | Connection information broken down by client IP address and client port number. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1 | RowaperTnServOperConnsEntry | not-accessible | mandatory | This table contains connection information for client IP and port. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.1 | ColumnaperTnServOperConnsClientIP | read-only | mandatory | The IP address of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.2 | ColumnaperTnServOperConnsClientPort | read-only | mandatory | The TCP port of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.3 | ColumnaperTnServOperConnsServerPort | read-only | mandatory | The TCP port of the TNSERVER which this client connected to. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.4 | ColumnaperTnServOperConnsType | read-only | mandatory | This variable identifies the socket as either a telnet 3270 or telnet 5250 session. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.5 | ColumnaperTnServOperConnsAppcSessId | read-only | mandatory | If this is a telnet 5250 session, then this variable identifies the APPC session used for the 5250 passthrough session. This value is valid only if the state o… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.6 | ColumnaperTnServOperConnsAlsName | read-only | mandatory | If this is a telnet 3270 session, then this variable identifies which SNA link station the session is active on. This information, as well as the LU number, is… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.7 | ColumnaperTnServOperConnsLuNumber | read-only | mandatory | If this is a telnet 3270 session, then this variable identifies the SNA LU number of the 3270 session. This information, as well as the ALS name, is used to id… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.8 | ColumnaperTnServOperConnsState | read-only | mandatory | The state of the telnet connection: connecting(1) Server has received TCP call packet negotiating(2) Server and client are negotiating Telnet options menu(3) S… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.9 | ColumnaperTnServOperConnsUpTime | read-only | mandatory | How long this telnet connection has existed. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.10 | ColumnaperTnServOperConnsInactivityLimit | read-only | mandatory | The inactivity limit of the telnet connection. This value specifies how long in minutes to allow a quiescent session, i.e. one with no data stream events, to b… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.11 | ColumnaperTnServOperConnsTimeSinceLastEvent | read-only | mandatory | The time expired since last datastream event was seen by the Telnet server for this telnet connection, in units of 1/100th of a second. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.12 | ColumnaperTnServOperConnsDeviceName | read-only | mandatory | The device name associated with the telnet session. For a 3270 display, this name is of the form <LuPool>:<LuNumber>. For a 3270 printer it is <PrinterLU>. For… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.13 | ColumnaperTnServOperConnsUserName | read-only | mandatory | The name of the Telnet User Connection Profile identified by the client when a telnet session was requested. This name is undefined if the session was named vi… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.14 | ColumnaperTnServOperConnsSessionName | read-only | mandatory | The name of the Session Definition identified by the client, or picked by the TNSERVER, when a telnet session was requested. This name is undefined if the sess… |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.15 | ColumnaperTnServOperConnsBytesOutbound | read-only | mandatory | This value indicates the number of bytes received by the Telnet Server from the remote 3270 or 5250 application. |
| 1.3.6.1.4.1.543.3.1.3.2.3.1.16 | ColumnaperTnServOperConnsBytesInbound | read-only | mandatory | This value indicates the number of bytes transmitted by the Telnet Server to the remote 3270 or 5250 application. |
| 1.3.6.1.4.1.543.3.1.3.3 | NodeaperTnServOper3270 | |||
| 1.3.6.1.4.1.543.3.1.3.3.1 | ScalaraperTnServOper3270NumActive | read-only | mandatory | The number of active 3270 LU's. |
| 1.3.6.1.4.1.543.3.1.3.3.2 | TableaperTnServOper3270Table | not-accessible | mandatory | SNA session information for 3270 LU's. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1 | RowaperTnServOper3270Entry | not-accessible | mandatory | This table contains 3270 LU information. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.1 | ColumnaperTnServOper3270AlsName | read-only | mandatory | This variable identifies which SNA link station the session is active on. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.2 | ColumnaperTnServOper3270LuNumber | read-only | mandatory | This variable identifies the SNA LU number of the 3270 session. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.3 | ColumnaperTnServOper3270ClientIP | read-only | mandatory | The IP address of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.4 | ColumnaperTnServOper3270ClientPort | read-only | mandatory | The TCP port of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.5 | ColumnaperTnServOper3270LuType | read-only | mandatory | The type of 3270 LU. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.6 | ColumnaperTnServOper3270LuState | read-only | mandatory | The state of the 3270 LU. enabled(2) means that the LU is configured and enabled on the server, connected(3) means it is enabled and connected to some client. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.7 | ColumnaperTnServOper3270SscpLuState | read-only | mandatory | The state of the SSCP-LU session. active(1) means that an ACTLU, +RSP(ACTLU) has been exchanged. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.8 | ColumnaperTnServOper3270LuLuState | read-only | mandatory | The state of the LU-LU session. active(1) means that a BIND, +RSP(BIND) has been exchanged. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.9 | ColumnaperTnServOper3270KeyboardLock | read-only | mandatory | This field indicates if the keyboard has been locked as per a 3270 status line. If the system or connection does not support keyboard lock, the entry will be u… |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.10 | ColumnaperTnServOper3270NetworkQualifiedSluName | read-only | mandatory | This is the network qualified name of the secondary LU, if known. This variable may be null if SLU name is not included in the BIND which established the LU-LU… |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.11 | ColumnaperTnServOper3270ModelNumber | read-only | mandatory | If the type of LU is display, then this variable specifies the type of terminal in regard to screen sizes. |
| 1.3.6.1.4.1.543.3.1.3.3.2.1.12 | ColumnaperTnServOper3270AssociatedPrinter | read-only | mandatory | If the type of LU is display, then this variable specifies the 3270 printer LU, if any, that is associated with the display. |
| 1.3.6.1.4.1.543.3.1.3.4 | NodeaperTnServOper5250 | |||
| 1.3.6.1.4.1.543.3.1.3.4.1 | ScalaraperTnServOper5250NumActive | read-only | mandatory | The number of active 5250 sessions. |
| 1.3.6.1.4.1.543.3.1.3.4.2 | ScalaraperTnServOper5250TableLastChange | read-only | mandatory | Time stamp of the last time a row was added to or deleted from the 5250 session table. This variable can be used to facilitate monitoring of the 5250 session t… |
| 1.3.6.1.4.1.543.3.1.3.4.3 | TableaperTnServOper5250Table | not-accessible | mandatory | SNA session information for 5250 sessions. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1 | RowaperTnServOper5250Entry | not-accessible | mandatory | This table contains 5250 session information. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.1 | ColumnaperTnServOper5250AppcSessId | read-only | mandatory | This variable identifies the APPC session used for the 5250 passthrough session. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.2 | ColumnaperTnServOper5250ClientIP | read-only | mandatory | The IP address of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.3 | ColumnaperTnServOper5250ClientPort | read-only | mandatory | The TCP port of the telnet client. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.4 | ColumnaperTnServOper5250AlsName | read-only | mandatory | The name of the SNA link station over which the session is active. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.5 | ColumnaperTnServOper5250SymbolicDestination | read-only | mandatory | The name of the CPIC symbolic destination used for the 5250 passthrough session allocation. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.6 | ColumnaperTnServOper5250LocalLuName | read-only | mandatory | The name of the local LU being used for the 5250 passthrough session. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.7 | ColumnaperTnServOper5250RemoteLuName | read-only | mandatory | The name of the remote LU being used for the 5250 passthrough session. This typically identifies the 5250 system where the user's applications are running. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.8 | ColumnaperTnServOper5250ModeName | read-only | mandatory | The name of the APPC mode being used for the 5250 passthrough session. |
| 1.3.6.1.4.1.543.3.1.3.4.3.1.9 | ColumnaperTnServOper5250KeyboardLock | read-only | mandatory | This field indicates if the keyboard has been locked as per a 5250 status line. If the system or connection does not support keyboard lock, the value is unlock… |
| 1.3.6.1.4.1.543.3.1.4 | NodeaperTnServStats | |||
| 1.3.6.1.4.1.543.3.1.4.1 | NodeaperTnServRtm | |||
| 1.3.6.1.4.1.543.3.1.4.1.1 | ScalaraperTnServRtmSupport | read-only | mandatory | This value indicates whether RTM is supported or not. If this value is off, all the following RTM values are not visible to an snmp manager. |
| 1.3.6.1.4.1.543.3.1.4.1.2 | ScalaraperTnServRtmDefaultState | read-write | mandatory | This value indicates whether RTM is initially on or off when a row in the RtmTable is created. |
| 1.3.6.1.4.1.543.3.1.4.1.3 | ScalaraperTnServRtmDefaultControl | read-write | mandatory | This is the initial value of the control when an ALS is activated, which determines whether the host or the tnserver controls write access to the values in the… |
| 1.3.6.1.4.1.543.3.1.4.1.4 | ScalaraperTnServRtmDefaultLocalDisplay | read-write | mandatory | This value indicates whether RTM statistics can be displayed locally. If local display is supported, the Telnet Server is allowed to display RTM statistics in … |
| 1.3.6.1.4.1.543.3.1.4.1.5 | ScalaraperTnServRtmDefaultDef | read-write | mandatory | This is the initial value of the the mode of measurement for RTM requests. The values have following meaning: firstChar(1) - time to first character on screen … |
| 1.3.6.1.4.1.543.3.1.4.1.6 | ScalaraperTnServRtmDefaultMeasureTcpIpTime | read-write | mandatory | The initial value of whether the transaction measurement of newly created entries in the RtmTable should include TCP/IP timings. |
| 1.3.6.1.4.1.543.3.1.4.1.7 | ScalaraperTnServRtmDefaultMeasureSnaTime | read-write | mandatory | The initial value of whether the transaction measurement of newly created entries in the RtmTable should include SNA timings. |
| 1.3.6.1.4.1.543.3.1.4.1.8 | ScalaraperTnServRtmDefaultSamplingFactor | read-write | mandatory | The initial value of fraction of transactions that should be timed when a new entry is created in the RtmTable. To avoid LAN congestion when TCP/IP timings are… |
| 1.3.6.1.4.1.543.3.1.4.1.9 | ScalaraperTnServRtmDefaultNumberOfBoundaries | read-write | mandatory | The initial value of the number of RTM boundaries utilized for newly created entries in the RtmTable. At least one RTM boundary must be specified so the range … |
| 1.3.6.1.4.1.543.3.1.4.1.10 | ScalaraperTnServRtmDefaultBoundary1 | read-write | mandatory | The initial value of the first boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not com… |
| 1.3.6.1.4.1.543.3.1.4.1.11 | ScalaraperTnServRtmDefaultBoundary2 | read-write | mandatory | The initial value of the second boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not co… |
| 1.3.6.1.4.1.543.3.1.4.1.12 | ScalaraperTnServRtmDefaultBoundary3 | read-write | mandatory | The initial value of the third boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not com… |
| 1.3.6.1.4.1.543.3.1.4.1.13 | ScalaraperTnServRtmDefaultBoundary4 | read-write | mandatory | The initial value of the fourth boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not co… |
| 1.3.6.1.4.1.543.3.1.4.1.14 | ScalaraperTnServRtmDefaultThresholdTrigger | read-write | mandatory | The default transaction time, in units of 1/10th of a second, which will cause a SNMP trap indicating excessive response time to the manager if the average tra… |
| 1.3.6.1.4.1.543.3.1.4.1.15 | ScalaraperTnServRtmDefaultThresholdTriggerState | read-write | mandatory | The default setting that will determine if the excessive transaction time SNMP trap is enabled when an entry in the RTM table is created. |
| 1.3.6.1.4.1.543.3.1.4.1.16 | ScalaraperTnServRtmDefaultCounterOverflowTriggerState | read-write | mandatory | The default setting that will determine if a transaction counter overflow SNMP trap is enabled when an entry in the RTM table is created. |
| 1.3.6.1.4.1.543.3.1.4.1.17 | ScalaraperTnServRtmDefaultCounterOverflowHostAlert | read-write | mandatory | The default setting that will determine if an unsolicited host alert is generated when a transaction counter overflows. |
| 1.3.6.1.4.1.543.3.1.4.1.18 | ScalaraperTnServRtmDefaultUnbindTriggerState | read-write | mandatory | The default setting that will determine whether the RTM unbind SNMP trap will be enabled when an entry in the RTM table is created. |
| 1.3.6.1.4.1.543.3.1.4.1.19 | ScalaraperTnServRtmDefaultUnbindHostAlert | read-write | mandatory | The default setting that will determine if an unsolicited host alert is generated when an unbind is received. |
| 1.3.6.1.4.1.543.3.1.4.1.20 | ScalaraperTnServRtmNumActive | read-only | mandatory | The number of active RTM entries. |
| 1.3.6.1.4.1.543.3.1.4.1.21 | TableaperTnServRtmTable | not-accessible | mandatory | SNA RTM information for 3270 display LU's. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1 | RowaperTnServRtmEntry | not-accessible | mandatory | This table contains RTM information. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.1 | ColumnaperTnServRtmAlsName | read-only | mandatory | The name of the link station. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.2 | ColumnaperTnServRtmLuNumber | read-only | mandatory | The number of the LU. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.3 | ColumnaperTnServRtmClientIP | read-only | mandatory | The IP address of the telnet client. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.4 | ColumnaperTnServRtmClientPort | read-only | mandatory | The TCP port number of the telnet client. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.5 | ColumnaperTnServRtmState | read-write | mandatory | The value indicates RTM is enabled or disabled for a particular LU. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.6 | ColumnaperTnServRtmLocalDisplay | read-write | mandatory | This value indicates whether RTM statistics can be displayed locally at the client's workstation. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.7 | ColumnaperTnServRtmUpTime | read-only | mandatory | This value represents the time elapsed since the RTM state was changed from off to on for this LU in units of 1/100th of a second. If the state of RTM is off, … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.8 | ColumnaperTnServRtmDef | read-write | mandatory | The value indicates the mode of measurement for this RTM request. The values have following meaning: firstChar(1) - time to first character on screen kb(2) - t… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.9 | ColumnaperTnServRtmMeasureTcpIpTime | read-write | mandatory | Should transaction measurement include TCP/IP timings? |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.10 | ColumnaperTnServRtmMeasureSnaTime | read-write | mandatory | Should transaction measurement include SNA timings? |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.11 | ColumnaperTnServRtmSamplingFactor | read-write | mandatory | The fraction of transactions that should be timed. To avoid LAN congestion when TCP/IP timings are included, this value allows the management station to contro… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.12 | ColumnaperTnServRtmNumberOfBoundaries | read-write | mandatory | The number of RTM boundaries utilized by the LU. At least one RTM boundary must be specified so the range of this variable is 1-4. Writing this variable causes… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.13 | ColumnaperTnServRtmBoundary1 | read-write | mandatory | This object contains the value of the first boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.14 | ColumnaperTnServRtmBoundary2 | read-write | mandatory | This object contains the value of the second boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The valu… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.15 | ColumnaperTnServRtmBoundary3 | read-write | mandatory | This object contains the value of the third boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.16 | ColumnaperTnServRtmBoundary4 | read-write | mandatory | This object contains the value of the fourth boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The valu… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.17 | ColumnaperTnServRtmCounter1 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the first boundary. When aperTnServRtmNumTrans is set to zero, this counte… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.18 | ColumnaperTnServRtmCounter2 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the second boundary. When aperTnServRtmNumTrans is set to zero, this count… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.19 | ColumnaperTnServRtmCounter3 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the third boundary. When aperTnServRtmNumTrans is set to zero, this counte… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.20 | ColumnaperTnServRtmCounter4 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the fourth boundary. When aperTnServRtmNumTrans is set to zero, this count… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.21 | ColumnaperTnServRtmOverFlows | read-only | mandatory | This value indicates the number of transactions which exceed the highest range specified by the boundaries. When aperTnServRtmNumTrans is set to zero, this cou… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.22 | ColumnaperTnServRtmThresholdTrigger | read-write | mandatory | This value indicates the threshold of average response time. If the transaction time being monitored exceeds this value and aperTnServRtmThresholdTriggerState … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.23 | ColumnaperTnServRtmThresholdTriggerState | read-write | mandatory | If this value is on(1), then whenever the average response for this LU exceeds aperTnServRtmThresholdTrigger, then an excessive response time trap will be gene… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.24 | ColumnaperTnServRtmCounterOverflowed | read-only | mandatory | This value indicates whether any of the five transaction counters have reached their maximum value. This variable can be reset by setting aperTnServRtmNumTrans… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.25 | ColumnaperTnServRtmCounterOverflowTriggerState | read-write | mandatory | If this value is on(1), then whenever a transaction counter overflows, a counter overflow trap is generated to the management station.. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.26 | ColumnaperTnServRtmCounterOverflowHostAlert | read-only | mandatory | The setting determines if an unsolicited host alert is generated when a transaction counter overflows. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.27 | ColumnaperTnServRtmUnbindTriggerState | read-write | mandatory | If this value is on(1), then whenever an unbind on a session with RTM enabled occurs, a session unbound trap is generated to the management station. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.28 | ColumnaperTnServRtmUnbindHostAlert | read-only | mandatory | The setting determines if an unsolicited host alert is generated when an unbind is received. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.29 | ColumnaperTnServRtmNumTrans | read-write | mandatory | This value indicates the total number of transactions monitored. This value can be set to zero only, which will also cause all counters and the counter overflo… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.30 | ColumnaperTnServRtmTotalRspTime | read-only | mandatory | This value indicates the sum of the response times for all transactions, in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.31 | ColumnaperTnServRtmLastRspTime | read-only | mandatory | This value indicates the response time for the last transaction in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.32 | ColumnaperTnServRtmAvgRspTime | read-only | mandatory | This value indicates the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.33 | ColumnaperTnServRtmMinRspTime | read-only | mandatory | The minimum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.34 | ColumnaperTnServRtmMaxRspTime | read-only | mandatory | The maximum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.35 | ColumnaperTnServRtmTotalSnaRspTime | read-only | mandatory | The SNA component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.36 | ColumnaperTnServRtmAvgSnaRspTime | read-only | mandatory | The SNA component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.37 | ColumnaperTnServRtmNumTcpIpSamples | read-only | mandatory | The number of transaction for which TCP/IP measurements were supplied. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.38 | ColumnaperTnServRtmTotalTcpIpRspTime | read-only | mandatory | The TCP/IP component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.39 | ColumnaperTnServRtmAvgTcpIpRspTime | read-only | mandatory | The TCP/IP component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.40 | ColumnaperTnServRtmLastThinkTime | read-only | mandatory | The time between the end of the penultimate transaction and the beginning of the last transaction, in units of 1/10th of a second. This gives an indication of … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.41 | ColumnaperTnServRtmAvgThinkTime | read-only | mandatory | The average time *between* transactions, in units of 1/10th of a second, during which the user was thinking. |
| 1.3.6.1.4.1.543.3.1.4.1.22 | ScalaraperTnServRtmMaxHist | read-write | mandatory | The maximum number of history entries in the Rtm History Table |
| 1.3.6.1.4.1.543.3.1.4.1.23 | ScalaraperTnServRtmNumHist | read-only | mandatory | The actual number of history entries in the Rtm History Table |
| 1.3.6.1.4.1.543.3.1.4.1.24 | ScalaraperTnServRtmLastHist | read-only | mandatory | The time when the latest entry was created in the Rtm History Table |
| 1.3.6.1.4.1.543.3.1.4.1.25 | TableaperTnServRtmHistTable | not-accessible | mandatory | SNA RTM information for 3270 display LU's. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1 | RowaperTnServRtmHistEntry | not-accessible | mandatory | This table contains RTM historical information. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.1 | ColumnaperTnServRtmHistIndex | read-only | mandatory | This value is used as an index in get-next operations to allow retrieval of the RTM History Table from most recent to oldest entry. The value of this variable … |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.2 | ColumnaperTnServRtmHistWhenDisconnected | read-only | mandatory | A timestamp, in units of 1/100th of a second, when the Telnet session being timed was terminated. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.3 | ColumnaperTnServRtmHistAlsName | read-only | mandatory | The name of the SNA adjacent link station on which the session occurred. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.4 | ColumnaperTnServRtmHistLuNumber | read-only | mandatory | The number of the SNA LU on which the session occurred. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.5 | ColumnaperTnServRtmHistClientIP | read-only | mandatory | The IP address of the telnet client for the session that has ended. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.6 | ColumnaperTnServRtmHistClientPort | read-only | mandatory | The TCP port of the telnet client for the session that has ended. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.7 | ColumnaperTnServRtmHistDeviceName | read-only | mandatory | The Telnet device name, if known, assigned to the telnet session that has ended. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.8 | ColumnaperTnServRtmHistUserName | read-only | mandatory | The name of the user profile, if known, associated with the telnet session that has ended. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.9 | ColumnaperTnServRtmHistSessionName | read-only | mandatory | The name of the session profile, if known, associated with the telnet session that has ended. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.10 | ColumnaperTnServRtmHistDef | read-only | mandatory | The value indicates the mode of measurement for the session that ended. The values have following meaning: firstChar(1) - time to first character on screen kb(… |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.11 | ColumnaperTnServRtmHistMeasureTcpIpTime | read-only | mandatory | Did transaction measurement include TCP/IP timings? |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.12 | ColumnaperTnServRtmHistMeasureSnaTime | read-only | mandatory | Did transaction measurement include SNA timings? |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.13 | ColumnaperTnServRtmHistSamplingFactor | read-only | mandatory | The fraction of transactions that should were timed. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.14 | ColumnaperTnServRtmHistNumberOfBoundaries | read-only | mandatory | The number of RTM boundaries utilized by the LU. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.15 | ColumnaperTnServRtmHistBoundary1 | read-only | mandatory | This object contains the value of the first boundary in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.16 | ColumnaperTnServRtmHistBoundary2 | read-only | mandatory | This object contains the value of the second boundary in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.17 | ColumnaperTnServRtmHistBoundary3 | read-only | mandatory | This object contains the value of the third boundary in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.18 | ColumnaperTnServRtmHistBoundary4 | read-only | mandatory | This object contains the value of the fourth boundary in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.19 | ColumnaperTnServRtmHistCounter1 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the first boundary. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.20 | ColumnaperTnServRtmHistCounter2 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the second boundary. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.21 | ColumnaperTnServRtmHistCounter3 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the third boundary. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.22 | ColumnaperTnServRtmHistCounter4 | read-only | mandatory | This value indicates the number of transactions which fall in the range specified by the fourth boundary. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.23 | ColumnaperTnServRtmHistOverFlows | read-only | mandatory | This value indicates the number of transactions which exceed the highest range specified by the boundaries. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.24 | ColumnaperTnServRtmHistCounterOverflowed | read-only | mandatory | This value indicates whether any of the five transaction counters has overflowed. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.25 | ColumnaperTnServRtmHistNumTrans | read-only | mandatory | This value indicates the total number of transactions executed since the RTM monitoring began |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.26 | ColumnaperTnServRtmHistTotalRspTime | read-only | mandatory | This value indicates the sum of the response times for all transactions, in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.27 | ColumnaperTnServRtmHistAvgRspTime | read-only | mandatory | This value indicates the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.28 | ColumnaperTnServRtmHistMinRspTime | read-only | mandatory | The minimum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.29 | ColumnaperTnServRtmHistMaxRspTime | read-only | mandatory | The maximum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.30 | ColumnaperTnServRtmHistTotalSnaRspTime | read-only | mandatory | The SNA component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.31 | ColumnaperTnServRtmHistAvgSnaRspTime | read-only | mandatory | The SNA component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.32 | ColumnaperTnServRtmHistNumTcpIpSamples | read-only | mandatory | The number of transaction for which TCP/IP measurements were supplied. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.33 | ColumnaperTnServRtmHistTotalTcpIpRspTime | read-only | mandatory | The TCP/IP component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.34 | ColumnaperTnServRtmHistAvgTcpIpRspTime | read-only | mandatory | The TCP/IP component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.25.1.35 | ColumnaperTnServRtmHistAvgThinkTime | read-only | mandatory | The average time *between* transactions, in units of 1/10th of a second, during which the user was thinking. |
| 1.3.6.1.4.1.543.3.1.4.1.26 | ScalaraperTnServRtmNumAls | read-only | mandatory | The number of per Als rows of RTM configuration entries in the RTM ALS table. |
| 1.3.6.1.4.1.543.3.1.4.1.27 | TableaperTnServRtmPerAlsTable | not-accessible | mandatory | SNA RTM information for 3270 display LU's. This table is used to alter certain RTM operational parameters for all LU's on a particular ALS. Except for the inde… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1 | RowaperTnServRtmPerAlsEntry | not-accessible | mandatory | This table is used to change RTM operational parameters. |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.1 | ColumnaperTnServRtmPerAlsName | read-only | mandatory | The name of the link station. |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.2 | ColumnaperTnServRtmPerAlsControl | read-only | mandatory | This is the value of the control for the specified ALS which determines whether the host or the tnserver controls write access to the values in the RtmTable fo… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.3 | ColumnaperTnServRtmPerAlsState | write-only | mandatory | The variable is used to turn on or off for all LU's on a given ALS. This variable can be set by the management station only when aperTnServRtmPerAlsControl for… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.4 | ColumnaperTnServRtmPerAlsDef | write-only | mandatory | The variable is used to change the definition of transactions for all LU's on a given ALS. The values have following meaning: firstChar(1) - time to first char… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.5 | ColumnaperTnServRtmPerAlsMeasureTcpIpTime | write-only | mandatory | Should transaction measurement include TCP/IP timings for all LU's on a given ALS? |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.6 | ColumnaperTnServRtmPerAlsMeasureSnaTime | write-only | mandatory | Should transaction measurement include SNA timings for all LU's on a given ALS? |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.7 | ColumnaperTnServRtmPerAlsSamplingFactor | write-only | mandatory | The fraction of transactions that should be timed. To avoid LAN congestion when TCP/IP timings are included, this value allows the management station to contro… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.8 | ColumnaperTnServRtmPerAlsNumberOfBoundaries | write-only | mandatory | The number of RTM boundaries utilized by all the LUs under the ALS. At least one RTM boundary must be specified so the range of this variable is 1-4. Writing t… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.9 | ColumnaperTnServRtmPerAlsBoundary1 | write-only | mandatory | This object contains the value of the first boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management sta… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.10 | ColumnaperTnServRtmPerAlsBoundary2 | write-only | mandatory | This object contains the value of the second boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management st… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.11 | ColumnaperTnServRtmPerAlsBoundary3 | write-only | mandatory | This object contains the value of the third boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management sta… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.12 | ColumnaperTnServRtmPerAlsBoundary4 | write-only | mandatory | This object contains the value of the fourth boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management st… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.13 | ColumnaperTnServRtmPerAlsResetCounters | write-only | mandatory | Setting this value to yes(1) will cause all transaction counters for all LU's on the specified ALS to zero. This variable can be set by the management station … |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.14 | ColumnaperTnServRtmPerAlsThresholdTrigger | write-only | mandatory | This value indicates the threshold of average response time. If the transaction time being monitored exceeds this value and aperTnServRtmPerAlsThresholdTrigger… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.15 | ColumnaperTnServRtmPerAlsThresholdTriggerState | write-only | mandatory | If this value is on(1), then whenever the average response for this LU exceeds aperTnServRtmPerAlsThresholdTrigger, then an excessive response time trap will b… |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.16 | ColumnaperTnServRtmPerAlsCounterOverflowTriggerState | write-only | mandatory | If this value is on(1), then whenever a transaction counter overflows, a counter overflow trap is generated to the management station.. |
| 1.3.6.1.4.1.543.3.1.4.1.27.1.17 | ColumnaperTnServRtmPerAlsUnbindTriggerState | write-only | mandatory | If this value is on(1), then whenever an unbind on a session with RTM enabled occurs, a session unbound trap is generated to the management station. |
| 1.3.6.1.4.1.543.3.1.5 | NodeaperTnServTraps | |||
| 1.3.6.1.4.1.543.3.1.5.1 | NodeaperTnServTrapsRtmExcessiveTransaction | This trap indicates that the average transaction time of the specified LU has exceeded that specified as the trigger value of this trap. | ||
| 1.3.6.1.4.1.543.3.1.5.2 | NodeaperTnServTrapsRtmCounterOverflow | This trap indicates that a transaction counter has exceeded its maximum value. The variables included is a row in the RtmTable. Once this trap has occur, if RT… | ||
| 1.3.6.1.4.1.543.3.1.5.3 | NodeaperTnServTrapsRtmSessionUnbound | This trap indicates that a LU which has transaction timing active has been unbound. The variables included is a row in the RtmTable. Once this trap has occur, … | ||
| 1.3.6.1.4.1.543.3.1.5.4 | NodeaperTnServTrapsUserDisabled | This trap indicates that a user profile has been disabled by the TNSERVER because of an attempt to connect to a Telnet User Connection Name, but supplying an i… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Tn3270AidKey | INTEGER { none(1), pa1(2), pa2(3), pa3(4), pf1(5), pf2(6), pf3(7), pf4(8), pf5(9), pf6(10), pf7(11), pf8(12), pf9(13), pf10(14), pf11(15), pf12(16), pf13(17), pf14(18), pf15(19), pf16(20), pf17(21), pf18(22), pf19(23), pf20(24), pf21(25), pf22(26), pf23(27), pf24(28) } | ||
| Tn5250AidKey | INTEGER { none(1), pa1(2), pa2(3), pa3(4), pf1(5), pf2(6), pf3(7), pf4(8), pf5(9), pf6(10), pf7(11), pf8(12), pf9(13), pf10(14), pf11(15), pf12(16), pf13(17), pf14(18), pf15(19), pf16(20), pf17(21), pf18(22), pf19(23), pf20(24), pf21(25), pf22(26), pf23(27), pf24(28), sysreq(29), attn(30), test(31) } |