APPACCELERATION-STATUS-MIB
190 objects
This module defines the status variables that can be retrieved from a Citrix Application Acceleration unit.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3845.30.4.1 | IdentityappAccelerationStatusMIB | This module defines the status variables that can be retrieved from a Citrix Application Acceleration unit. | ||
| 1.3.6.1.4.1.3845.30.4.1.1 | NodewsStatusMIBObjects | |||
| 1.3.6.1.4.1.3845.30.4.1.1.1 | NodewsStatusMIBScalars | |||
| 1.3.6.1.4.1.3845.30.4.1.1.1.1 | ScalarwsOperStatus | read-only | current | The current operational state of the unit. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.2 | ScalarwsLoad1Min | read-only | deprecated | The 1 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is c… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.3 | ScalarwsLoad5Min | read-only | deprecated | The 5 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is c… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.4 | ScalarwsLoad15Min | read-only | deprecated | The 15 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is … |
| 1.3.6.1.4.1.3845.30.4.1.1.1.5 | ScalarwsBypass | read-only | current | Traffic processing status. This is also available in the GUI Features page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.6 | ScalarwsLastAlarmSeqNum | read-only | current | The value of the alarm sequence number for the last alarm generated as a trap. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.7 | ScalarwsBoostStatus | read-only | deprecated | The selected boost mode. This is also available in the GUI Bandwidth Management page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.8 | ScalarwsBandwidthMode | read-only | current | The selected bandwidth usage. This is also available in the GUI Bandwidth Management page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.9 | ScalarwsBandwidthLimit | read-only | current | Send bandwidth limit. This is also available in the GUI Bandwidth Management page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.10 | ScalarwsWanOutOctets | read-only | current | Number of accelerated octets transmitted on the WAN side. This is also available in the GUI Usage Graph page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.11 | ScalarwsWanInOctets | read-only | current | Number of accelerated octets received on the WAN side. This is also available in the GUI Usage Graph page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.12 | ScalarwsLanOutOctets | read-only | current | Number of accelerated octets transmitted on the LAN side. This is also available in the GUI Usage Graph page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.13 | ScalarwsLanInOctets | read-only | current | Number of accelerated octets received on the LAN side. This is also available in the GUI Usage Graph page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.14 | ScalarwsCompressionEffectiveBandwidth | read-only | current | The equivalent throughput before compression. This is also available in the GUI Compression Status page. This variable may be reset from the above web page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.15 | ScalarwsSendCompressionRatio | read-only | current | Average send compression rate per 1000 octets, e.g. 3500 means 3.5 to 1 compression. This is also available in the GUI Compression Status page. This variable m… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.16 | ScalarwsReceiveCompressionRatio | read-only | current | Average receive compression rate per 1000 octets, e.g. 3500 means 3.5 to 1 compression. This is also available in the GUI Compression Status page. This variabl… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.17 | ScalarwsCompressionStatsCollectionTime | read-only | current | The number of centiseconds (0.01 seconds) since the start of the compression statistics collection. This is also available in the GUI Compression Status page. … |
| 1.3.6.1.4.1.3845.30.4.1.1.1.18 | ScalarwsAcceleratedConnections | read-only | current | Number of current accelerated (active + inactive) connections. This is also available in the GUI System Status page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.19 | ScalarwsNonAcceleratedConnections | read-only | current | Number of current non-accelerated connections. This is also available in the GUI System Status page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.20 | ScalarwsHaState | read-only | current | High availability state of the unit. This is also available in the GUI High Availability page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.21 | ScalarwsHaVmIp | read-only | current | Virtual Management IP Address used in HA setup. This is also available in the GUI High Availability page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.22 | ScalarwsHaSecondaryIp | read-only | current | When retrieved from the primary unit (in HA configuration), this is the IP Address of the secondary unit. When retrieved from a secondary or standalone unit, t… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.23 | ScalarwsPrimaryIp | read-only | current | IP Address of the Primary Port, which is for management data. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.24 | ScalarwsCpuUsage | read-only | current | Averaged percent CPU used by the traffic accelerator in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.25 | ScalarwsConnectedPlugIns | read-only | current | Current number of Plug-ins connected to this unit. This is also available in the GUI System Status page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.26 | ScalarwsMaxPlugIns | read-only | current | The Maximum number of Plug-ins that are allowed to connect to this unit. This is also available in the GUI System Status page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.27 | ScalarwsQosStatsCollectionTime | read-only | current | The number of centiseconds (0.01 seconds) since the start of the QoS and ICA statistics collection. This is also available in the GUI QoS Statistics page. This… |
| 1.3.6.1.4.1.3845.30.4.1.1.1.28 | ScalarwsUpTime | read-only | current | The time (in hundredths of a second) since the unit was last re-initialized. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.29 | ScalarwsSerialNumber | read-only | current | Appliance serial number. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.30 | ScalarwsNonAcceleratedVolume | read-only | current | Total non-accelerated k-bytes received by the unit, on all interfaces. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.31 | ScalarwsActiveConnections | read-only | current | Number of active accelerated connections. This is also available in the GUI System Status page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.32 | ScalarwsAccelerationStatus | read-only | current | Traffic acceleration (flow control and compression) status. This is also available in the GUI Features page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.33 | ScalarwsTrafficShapingStatus | read-only | current | Traffic shaping (QoS) status. This is also available in the GUI Features page. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.34 | ScalarwsSystemLoad | read-only | current | Load indicator, 100 meant overload. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.35 | ScalarwsWanSendRate | read-only | current | The average WAN side send rate in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.36 | ScalarwsWanReceiveRate | read-only | current | The average WAN side receive rate in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.37 | ScalarwsLanSendRate | read-only | current | The average LAN side send rate in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.38 | ScalarwsLanReceiveRate | read-only | current | The average LAN side receive rate in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.39 | ScalarwsNonAcceleratedRate | read-only | current | The average non-accelerated traffic rate in the last minute. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.40 | ScalarwsModelNumber | read-only | current | Appliance model number. |
| 1.3.6.1.4.1.3845.30.4.1.1.1.41 | ScalarwsWccpStatus | read-only | current | WCCP status. This is also available in the GUI Features page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2 | NodewsStatusMIBTables | |||
| 1.3.6.1.4.1.3845.30.4.1.1.2.1 | TablewsActiveAlarmTable | not-accessible | current | A list of the active alarm entries. This represents the fault conditions that are still active in the unit. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1 | RowactiveAlarmEntry | not-accessible | current | The active alarm entries that are still valid system faults. RFC2578 (SMIv2) requires this to be not-accessible. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.1 | ColumnwsActiveAlarmIndex | read-only | current | An index that uniquely identifies an entry in the active alarm table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.2 | ColumnwsActiveAlarmSeqNum | read-only | current | The active alarm's sequence number at the time it was generated. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.3 | ColumnwsActiveAlarmID | read-only | current | The OID identifying the actual trap that was generated. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.4 | ColumnwsActiveAlarmSeverity | read-only | current | The alarm severity for the active alarm. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.5 | ColumnwsActiveAlarmLogTime | read-only | current | The value of sysUpTime when the alarm was generated. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.6 | ColumnwsActiveAlarmDesc | read-only | current | A description for the active alarm. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.7 | ColumnwsActiveAlarmAcked | read-write | current | Identifies if the user has acknowledged the alarm. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.1.1.8 | ColumnwsActiveAlarmServiceAffect | read-only | current | Identifies if the alarm is service affecting. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2 | TablewsServiceClassStatsTable | not-accessible | current | A list of service class statistics entries. This contains the performance statistics separated by service classes. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1 | RowwsServiceClassStatsEntry | not-accessible | current | Each service class entry contains the performance statistics for one service class. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.1 | ColumnwsServiceClassIndex | read-only | current | This is used as an index that uniquely identifies a service class in the service class statistics table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.2 | ColumnwsServiceClassName | read-only | current | Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc. The list of service classes monitored is defined in the GUI Configure Settings: Service Class page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.3 | ColumnwsScsCurrentAcceleratedConnections | read-only | current | Current number of accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset … |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.4 | ColumnwsScsTotalAcceleratedConnections | read-only | current | Total number of accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset on… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.5 | ColumnwsScsTotalAcceleratedOctets | read-only | current | Total number of accelerated octets for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.6 | ColumnwsScsTotalNonAcceleratedConnections | read-only | current | Total number of non-accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is rese… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.7 | ColumnwsScsTotalNonAcceleratedOctets | read-only | current | Total number of non-accelerated octets for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset onl… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.8 | ColumnwsScsTotalPreCompressionOctets | read-only | current | Total number of accelerated octets for the service class before compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.9 | ColumnwsScsCompressSentOctets | read-only | current | Number of accelerated octets sent for the service class after compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.10 | ColumnwsScsCompressReceivedOctets | read-only | current | Number of accelerated octets received for the service class after compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.11 | ColumnwsScsPreCompressSentOctets | read-only | current | Number of accelerated octets sent for the service class before compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.12 | ColumnwsScsPreCompressReceivedOctets | read-only | current | Number of accelerated octets received for the service class before compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.13 | ColumnwsScsSendBWSavings | read-only | current | WAN-side send bandwidth savings. 100% meant very high (above 99.5:1) compression. 0% meant no compression savings. The formula is (Pre-compress-send-bytes - Co… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.14 | ColumnwsScsRecvBWSavings | read-only | current | WAN-side receive bandwidth savings. 100% meant very high (above 99.5:1) compression. 0% meant no compression savings. The formula is (Pre-compress-received-byt… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.15 | ColumnwsScsSendRecvBWSavings | read-only | current | Combined send and receive bandwidth savings. The formula is (Pre-compress-bytes - Compressed-bytes) / Pre-compress-bytes * 100% |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.16 | ColumnwsScsSendCompressionRatio | read-only | current | WAN-side send compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.17 | ColumnwsScsRecvCompressionRatio | read-only | current | WAN-side receive compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.2.1.18 | ColumnwsScsSendRecvCompressionRatio | read-only | current | Combined send and receive compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3 | TablewsQosTrafficClassStatsTable | not-accessible | deprecated | A list of QoS traffic class statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1 | RowwsQosTcStatsEntry | not-accessible | deprecated | Each entry contains performance statistics for one QoS traffic class. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1.1 | ColumnwsQosIndex | read-only | deprecated | This index uniquely identifies a QoS traffic class in the QoS traffic class statistics table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1.2 | ColumnwsQosName | read-only | deprecated | Name of the QoS traffic class, which is defined in the GUI Configure Settings: QoS page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1.3 | ColumnwsQosConfiguredSendRatio | read-only | deprecated | The minimum share of the bandwidth configured for this traffic class. This is also available in the GUI QoS Statistics page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1.4 | ColumnwsQosSentVolume | read-only | deprecated | The total volume of QoS traffic sent for this queue, measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page. The wsQosStatsCollect… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.3.1.5 | ColumnwsQosActualSendRatio | read-only | deprecated | The bandwidth used by this traffic class. This is calculated using the wsQosSentVolume for the traffic class divided by the sum of wsQosSentVolume of all traff… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4 | TablewsIcaStatsTable | not-accessible | current | A list of ICA Traffic Presentation Layer statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1 | RowwsIcaStatsEntry | not-accessible | current | Each entry contains the performance statistics for one ICA priority. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.1 | ColumnwsIcaIndex | read-only | current | This is used as an index that uniquely identifies an ICA service in the ICA Traffic Presentation Layer statistics table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.2 | ColumnwsIcaServiceName | read-only | current | Name of the ICA service, which is also in the GUI QoS Statistics page, Citrix ICA Traffic Presentation Layer Statistics section. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.3 | ColumnwsIcaPriority | read-only | deprecated | The ICA Priorities: high is for realtime traffic, medium is for interactive traffic, low is for bulk transfer traffic, background is for the lowest priority tr… |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.4 | ColumnwsIcaSentVolume | read-only | current | The total volume of traffic sent for this ICA applications measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.5 | ColumnwsIcaSentRatio | read-only | current | The sent volume as a percent share of the different ICA applications. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.6 | ColumnwsIcaReceivedVolume | read-only | current | The total volume of traffic received for this ICA application, measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.7 | ColumnwsIcaReceivedRatio | read-only | current | The received volume as a percent share of the different priority of the service. This counter may be reset from the GUI QoS Statistics page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.8 | ColumnwsIcaSendRate | read-only | current | The last minute send rate of this ICA application. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.4.1.9 | ColumnwsIcaReceiveRate | read-only | current | The last minute receive rate of this ICA application. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5 | TablewsAdapterTable | not-accessible | current | A list of adapters configured for the unit. It is also in the GUI IP Address page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1 | RowwsAdapterEntry | not-accessible | current | Each entry contains performance statistics for one ADAPTER. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.1 | ColumnwsAdapterIndex | read-only | current | This is used as an index that uniquely identifies an adapter. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.2 | ColumnwsAdapterName | read-only | current | Adapter name. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.3 | ColumnwsAdapterEnabled | read-only | current | Adapter state. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.4 | ColumnwsAdapterIp | read-only | current | Adapter IP address. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.5 | ColumnwsAdapterNetmask | read-only | current | Adapter network mask. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.6 | ColumnwsAdapterGateway | read-only | current | Adapter gateway. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.7 | ColumnwsAdapterVirtualIp | read-only | current | HA virtual IP address. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.8 | ColumnwsAdapterVLanEnabled | read-only | current | VLAN state. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.5.1.9 | ColumnwsAdapterVLanGroup | read-only | current | VLAN group ID. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6 | TablewsLinkStatsTable | not-accessible | current | A list of link statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1 | RowlinkStatsEntry | not-accessible | current | Each entry contains the performance statistics for one link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.1 | ColumnlinkIndex | read-only | current | This index uniquely identifies a link in the link statistics table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.2 | ColumnlinkName | read-only | current | Name of the link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.3 | ColumnlinkSentVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.4 | ColumnlinkReceivedVolume | read-only | current | The total volume of traffic received on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.5 | ColumnlinkSentPackets | read-only | current | The total number of packets sent on the link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.6 | ColumnlinkReceivedPackets | read-only | current | The total number of packets received on the link. in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.7 | ColumnlinkDroppedSentVolume | read-only | current | The total traffic not sent on the link due to QoS threshold, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.8 | ColumnlinkDroppedReceivedVolume | read-only | current | The total received traffic dropped from the link due to QoS threshold, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.9 | ColumnlinkDroppedSentPackets | read-only | current | The total number of packets not sent on the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.6.1.10 | ColumnlinkDroppedReceivedPackets | read-only | current | The total number of received packets dropped from the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7 | TablewsAppStatsTable | not-accessible | current | A list of link statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1 | RowappStatsEntry | not-accessible | current | Each entry contains the performance statistics for one application on one link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.1 | ColumnappIndex | read-only | current | This index uniquely identifies one application on a link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.2 | ColumnappName | read-only | current | Name of the link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.3 | ColumnappId | read-only | current | Unique ID for application. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.4 | ColumnappParentId | read-only | current | Parent application ID. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.5 | ColumnappGroupId | read-only | current | Bit mask, indicating the group which this application belong to. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.6 | ColumnappSentVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.7 | ColumnappReceivedVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.8 | ColumnappSentPackets | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.9 | ColumnappReceivedPackets | read-only | current | The total volume of traffic sent on the link, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.10 | ColumnappDroppedSentVolume | read-only | current | The total traffic not sent on the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.11 | ColumnappDroppedReceiveVolume | read-only | current | The total received traffic dropped from the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.12 | ColumnappDroppedSentPackets | read-only | current | The total number of packets not sent on the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.13 | ColumnappDroppedReceivedPackets | read-only | current | The total number of received packets dropped from the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.14 | ColumnappSendRate | read-only | current | The last minute send rate of this application. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.7.1.15 | ColumnappReceiveRate | read-only | current | The last minute receive rate of this application. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8 | TablewsQosStatsTable | not-accessible | current | A list of QoS traffic class statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1 | RowqosStatsEntry | not-accessible | current | Each entry contains the performance statistics for one QoS traffic class. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.1 | ColumnqosIndex | read-only | current | This index uniquely identifies a QoS traffic class in the QoS traffic class statistics table. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.2 | ColumnqosPolicyName | read-only | current | Name of the QoS Policy. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.3 | ColumnqosLink | read-only | current | Name of the link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.4 | ColumnqosSentVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.5 | ColumnqosReceiveVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.6 | ColumnqosSentPackets | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.7 | ColumnqosReceivedPackets | read-only | current | The total volume of traffic sent on the link, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.8 | ColumnqosDroppedSentVolume | read-only | current | The total traffic not sent on the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.9 | ColumnqosDroppedReceiveVolume | read-only | current | The total received traffic dropped from the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.10 | ColumnqosDroppedSentPackets | read-only | current | The total number of packets not sent on the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.8.1.11 | ColumnqosDroppedReceivedPackets | read-only | current | The total number of received packets dropped from the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9 | TablewsLscStatsTable | not-accessible | current | A list of link level service class statistics. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1 | RowlscStatsEntry | not-accessible | current | Each entry contains the performance statistics for one link level service class. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.1 | ColumnlscIndex | read-only | current | This index is used to identify the link statistics within a service class. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.2 | ColumnlscServiceClassName | read-only | current | Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc. The list of service classes monitored is defined in the GUI Configure Settings: Service Class page. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.3 | ColumnlscLink | read-only | current | Name of the link. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.4 | ColumnlscSentVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.5 | ColumnlscReceivedVolume | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.6 | ColumnlscSentPackets | read-only | current | The total volume of traffic sent on the link, measured in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.7 | ColumnlscReceivedPackets | read-only | current | The total volume of traffic sent on the link, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.8 | ColumnlscDroppedSentVolume | read-only | current | The total traffic not sent on the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.9 | ColumnlscDroppedReceiveVolume | read-only | current | The total received traffic dropped from the link due to QoS threshold, in 1000-octets. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.10 | ColumnlscDroppedSentPackets | read-only | current | The total number of packets not sent on the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.9.1.11 | ColumnlscDroppedReceivedPackets | read-only | current | The total number of received packets dropped from the link due to QoS threshold. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10 | TablewsPartnerTable | not-accessible | current | A list of CloudBridge partners |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1 | RowpartnerEntry | not-accessible | current | Each row contains information on one partner unit. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.1 | ColumnpartnerAddrType | read-only | current | Format of partnerAddr, IPv4 or IPv6. See RFC4001 for InetAddressType and InetAddress usage. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.2 | ColumnpartnerAddr | read-only | current | Partner IP address. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.3 | ColumnpartnerConnections | read-only | current | Number of accelerated connections to partner. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.4 | ColumnpartnerSendRate | read-only | current | The last minute send rate to partner. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.5 | ColumnpartnerReceiveRate | read-only | current | The last minute receive rate from partner. |
| 1.3.6.1.4.1.3845.30.4.1.1.2.10.1.6 | ColumnpartnerIdleTime | read-only | current | Time where no traffic flows between this partner. |
| 1.3.6.1.4.1.3845.30.4.1.1.3 | ScalarwsHAMasterIpAddr | accessible-for-notify | current | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router. |
| 1.3.6.1.4.1.3845.30.4.1.1.4 | NodewsStatusMIBAlertTables | |||
| 1.3.6.1.4.1.3845.30.4.1.1.4.1 | ScalarwsAlertAction | read-only | current | Action of the alert. |
| 1.3.6.1.4.1.3845.30.4.1.1.4.2 | ScalarwsAlertClass | read-only | current | Class of the alert. |
| 1.3.6.1.4.1.3845.30.4.1.1.4.3 | ScalarwsAlertMsg | read-only | current | Message of the alert. |
| 1.3.6.1.4.1.3845.30.4.1.1.5 | ScalarwsSourceIpAddr | accessible-for-notify | current | The IP address of the source of Alert. |
| 1.3.6.1.4.1.3845.30.4.1.2 | NodewsStatusMIBConformance | |||
| 1.3.6.1.4.1.3845.30.4.1.2.1 | NodewsStatusMIBCompliances | |||
| 1.3.6.1.4.1.3845.30.4.1.2.1.1 | CompliancewsStatusCompliance | current | The compliance statement for agents which implement appAccelerationStatusMIB. | |
| 1.3.6.1.4.1.3845.30.4.1.2.2 | NodewsStatusMIBGroups | |||
| 1.3.6.1.4.1.3845.30.4.1.2.2.1 | GroupwsStatusGroup | current | A collection of objects used to retrieve status information | |
| 1.3.6.1.4.1.3845.30.4.1.2.2.2 | GroupwsStatusTrapGroup | current | Conformance group for objects contained in VRRP notifications. | |
| 1.3.6.1.4.1.3845.30.4.1.2.2.3 | GroupwsStatusNotifyGroup | current | A collection of the Notifications supported in the status MIB. | |
| 1.3.6.1.4.1.3845.30.5.1 | NodewsStatusMIBNotifications | |||
| 1.3.6.1.4.1.3845.30.5.1.1 | NotificationwsNotifyStart | current | An indication that the agent has started running. | |
| 1.3.6.1.4.1.3845.30.5.1.2 | NotificationwsNotifyShutdown | current | An indication that the agent is in the process of being shutdown. | |
| 1.3.6.1.4.1.3845.30.5.1.3 | NotificationwsNotifyRestart | deprecated | An indication that the agent has been restarted. | |
| 1.3.6.1.4.1.3845.30.5.1.4 | NotificationwsHANotifyNewMaster | current | The newMaster trap indicates that the sending agent has transitioned to 'Master' state. | |
| 1.3.6.1.4.1.3845.30.5.1.5 | NotificationwsNotifyAvailBWChange | deprecated | And indication that available BW Has Changed | |
| 1.3.6.1.4.1.3845.30.5.1.6 | NotificationwsNotifyUnexpectedRestart | current | An indication that the agent has been unexpectedly restarted. | |
| 1.3.6.1.4.1.3845.30.5.1.7 | NotificationwsNotifyPersistentError | current | The unit is experiencing a persistent internal error. | |
| 1.3.6.1.4.1.3845.30.5.1.8 | NotificationwsNotifyAlert | current | An alert is generated from the unit. | |
| 1.3.6.1.4.1.3845.30.5.1.9 | NotificationwsNotifyConfigurationChanged | current | An indication that the configuration has changed. |