MIB Viewer

APPIAN-PPORT-ETHERNET-MIB

63 objects
Appian Communications Ethernet Access MIB which contains the configuration and statistics attributes for an 802.3 physical interface.
Imported Objects
APPIAN-CHASSIS-MIBacChassisCurrentTime acChassisRingId
APPIAN-SMI-MIBAcAdminStatus AcNodeId AcOpStatus AcPortNumber acPport AcSlotNumber
SNMPv2-SMICounter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString PhysAddress TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2785.2.3.3IdentityacEnetAppian Communications Ethernet Access MIB which contains the configuration and statistics attributes for an 802.3 physical interface.
1.3.6.1.4.1.2785.2.3.3.0NodeacEnetTraps
1.3.6.1.4.1.2785.2.3.3.0.1NotificationacEnetLinkDownTrapcurrentThe physical cable for this Ethernet interface has been detected as disconnected.
1.3.6.1.4.1.2785.2.3.3.0.2NotificationacEnetLinkUpTrapcurrentThe physical cable for this Ethernet interface has been detected as connected.
1.3.6.1.4.1.2785.2.3.3.0.3NotificationacEnetStatsResetTrapcurrentThe Ethernet statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface.
1.3.6.1.4.1.2785.2.3.3.0.4NotificationacEnetFailoverTrapcurrentA failover condition has been detected. Control has been changed to the standby Ethernet media module. Refer to acEnetCfgActiveMediaSlot and acEnetCfgStandbyMe…
1.3.6.1.4.1.2785.2.3.3.0.5NotificationacEnetCfgErrorTrapcurrentA configuration request to the Ethernet configuration table for an interface has been detected as invalid or corrupt.
1.3.6.1.4.1.2785.2.3.3.1TableacEnetStatsTablenot-accessiblecurrentA table containing the statistics parameters for 10/100Mb and 1Gb Ethernet access ports. The index keys used in this table (slot.port) are mapped to ifIndex un…
1.3.6.1.4.1.2785.2.3.3.1.1RowacEnetStatsEntrynot-accessiblecurrentA row in the Ethernet Statistics table containing all Ethernet level statistics for a specific Ethernet access port. Rows in the statistics table are automatic…
1.3.6.1.4.1.2785.2.3.3.1.1.1ColumnacEnetStatsNodeIdaccessible-for-notifycurrentThe node id is the id for this specific node in the OSAP ring.
1.3.6.1.4.1.2785.2.3.3.1.1.2ColumnacEnetStatsSlotaccessible-for-notifycurrentThe slot number within the chassis where this module entry resides.
1.3.6.1.4.1.2785.2.3.3.1.1.3ColumnacEnetStatsPortaccessible-for-notifycurrentThe port number on the module which represents this instance of an Ethernet access port.
1.3.6.1.4.1.2785.2.3.3.1.1.4ColumnacEnetStatsPktsRxread-onlycurrentThe total number of packets received on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.5ColumnacEnetStatsPktsTxread-onlycurrentThe total number of packets transmitted on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.6ColumnacEnetStatsOctetsRxread-onlycurrentThe total number of octets (bytes) received on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.7ColumnacEnetStatsOctetsTxread-onlycurrentThe total number of octets (bytes) transmitted on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.8ColumnacEnetStatsBcastPktsRxread-onlycurrentThe total number of broadcast packets received on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.9ColumnacEnetStatsBcastPktsTxread-onlycurrentThe total number of broadcast packets transmitted on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.10ColumnacEnetStatsMcastPktsRxread-onlycurrentThe total number of Multicast packets received on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.11ColumnacEnetStatsMcastPktsTxread-onlycurrentThe total number of Multicast packets transmitted on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.12ColumnacEnetStatsCrcAlignErrorsread-onlycurrentThe total number of CRC alignment errors received on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.13ColumnacEnetStatsUndersizedPktsread-onlycurrentThe total number of packets received on this interface which were below a minimum 64byte length, expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.14ColumnacEnetStatsOversizedPktsread-onlycurrentThe total number of packets received on this interface which were determined to be greater than 1522 bytes in length, expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.15ColumnacEnetStatsFragmentedPktsread-onlycurrentThe total number of fragmented frames detected on this interface expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.16ColumnacEnetStatsJabbersread-onlycurrentThe total number of babbling jabbers detected on this interface, expressed as a 64bit integer.
1.3.6.1.4.1.2785.2.3.3.1.1.17ColumnacEnetStatsCollisionsread-onlycurrentThe total number of collisions detected on this interface during transmission attempts which have exceeded the maximum count of (16) per frame. This counter is…
1.3.6.1.4.1.2785.2.3.3.1.1.18ColumnacEnetStatsPkts64Octetsread-onlycurrentThe total number of frames transmitted and received which were exactly 64 bytes in length. This counter is expressed as a 64bit integer. This allows us to supp…
1.3.6.1.4.1.2785.2.3.3.1.1.19ColumnacEnetStatsPkts65to127Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 65 and 127 bytes in length, expressed as a 64bit integer. This allows…
1.3.6.1.4.1.2785.2.3.3.1.1.20ColumnacEnetStatsPkts128to255Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 128 and 255 bytes in length, expressed as a 64bit integer. This allow…
1.3.6.1.4.1.2785.2.3.3.1.1.21ColumnacEnetStatsPkts256to511Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 256 and 511 bytes in length, expressed as a 64bit integer. This allow…
1.3.6.1.4.1.2785.2.3.3.1.1.22ColumnacEnetStatsPkts512to1023Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 512 and 1023 bytes in length, expressed as a 64bit integer. This allo…
1.3.6.1.4.1.2785.2.3.3.1.1.23ColumnacEnetStatsPkts1024to1518Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 1024 and 1518 bytes in length, expressed as a 64bit integer. This all…
1.3.6.1.4.1.2785.2.3.3.1.1.24ColumnacEnetStatsCurrentRxBandwidthread-onlycurrentThe current receive bandwidth expressed as a percentage value between 0 and 100%. Bandwidth is calculated by the ethernet driver upon the request for this attr…
1.3.6.1.4.1.2785.2.3.3.1.1.25ColumnacEnetStatsCurrentTxBandwidthread-onlycurrentThe current transmit bandwidth expressed as a percentage value between 0 and 100%. Bandwidth is calculated by the ethernet driver upon the request for this att…
1.3.6.1.4.1.2785.2.3.3.1.1.26ColumnacEnetStatsPausePktsRxread-onlycurrentA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is o…
1.3.6.1.4.1.2785.2.3.3.1.1.27ColumnacEnetStatsPausePktsTxread-onlycurrentA count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface i…
1.3.6.1.4.1.2785.2.3.3.1.1.28ColumnacEnetStatsPkts1519to1522Octetsread-onlycurrentThe total number of packets transmitted and received on this interface which were between 1519 and 1522 bytes in length, expressed as a 64bit integer. This all…
1.3.6.1.4.1.2785.2.3.3.2TableacEnetCfgTablenot-accessiblecurrentA table of configuration instances for Ethernet Access ports. This table is automatically created based on what hardware is installed in the slot.
1.3.6.1.4.1.2785.2.3.3.2.1RowacEnetCfgEntrynot-accessiblecurrentA row which contains the configuration parameters for an Ethernet Access port. These rows must be created by the EMS or CLI, and are not automatically instanti…
1.3.6.1.4.1.2785.2.3.3.2.1.1ColumnacEnetCfgNodeIdaccessible-for-notifycurrentThe node id is the id for this specific node in the OSAP ring.
1.3.6.1.4.1.2785.2.3.3.2.1.2ColumnacEnetCfgSlotaccessible-for-notifycurrentThe physical I/O slot where this access port is located.
1.3.6.1.4.1.2785.2.3.3.2.1.3ColumnacEnetCfgPortaccessible-for-notifycurrentThe physical connector on the I/O module for this Ethernet port.
1.3.6.1.4.1.2785.2.3.3.2.1.4ColumnacEnetCfgAdminStatusread-createcurrentAppian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file f…
1.3.6.1.4.1.2785.2.3.3.2.1.5ColumnacEnetCfgOpStatusread-onlycurrentThe current operational status for the Ethernet module controlling this port.
1.3.6.1.4.1.2785.2.3.3.2.1.6ColumnacEnetCfgOpCoderead-onlycurrentProvides a detailed status code which can be used to isolate a problem or state condition reported in acEnetCfgOpStatus.
1.3.6.1.4.1.2785.2.3.3.2.1.7ColumnacEnetCfgStatsResetread-createcurrentSetting this attribute to True(1) will force all statistics for this row to be cleared and set to zero (0) values. Used for debugging, clearing statistics can …
1.3.6.1.4.1.2785.2.3.3.2.1.8ColumnacEnetCfgMediaTyperead-onlycurrentAttribute to determine if this module is a 10mb/100mb or 1gb interface.
1.3.6.1.4.1.2785.2.3.3.2.1.9ColumnacEnetCfgPhysicalAddressread-onlycurrentThe physical address (MAC Address) assigned to this physical Ethernet port.
1.3.6.1.4.1.2785.2.3.3.2.1.10ColumnacEnetCfgActiveMediaSlotread-onlycurrentThis object identifies the slot in the chassis carrying the active media board for this port.
1.3.6.1.4.1.2785.2.3.3.2.1.11ColumnacEnetCfgStandbyMediaSlotread-onlycurrentThis object identifies the slot in the chassis carrying the standby media board for this port.
1.3.6.1.4.1.2785.2.3.3.2.1.12ColumnacEnetCfgMultiServiceEnableread-createcurrentFlag used to enable or disable multi-service for this Ethernet access port. When set to True(2), the port is used for multi-service.
1.3.6.1.4.1.2785.2.3.3.2.1.13ColumnacEnetCfgSpeedread-createcurrentThe desired configured speed of the physical interface.
1.3.6.1.4.1.2785.2.3.3.2.1.14ColumnacEnetCfgDuplexityread-createcurrentThe desired configured duplexity mode. By default set to full(1) but for interfacing to some older hubs, which do not perform link duplexity negotiation proper…
1.3.6.1.4.1.2785.2.3.3.2.1.15ColumnacEnetCfgCurrentSpeedread-onlycurrentThe current operational interface speed for this Ethernet port as determined by the MAC PHY interface. If using Auto Negotiation, the current speed may be diff…
1.3.6.1.4.1.2785.2.3.3.2.1.16ColumnacEnetCfgCurrentDuplexityread-onlycurrentThe current operational duplexity mode for this Ethernet port as determined by the MAC PHY interface. If using Auto Negotiation, the current duplexity may be d…
1.3.6.1.4.1.2785.2.3.3.2.1.17ColumnacEnetCfgInterfaceNameread-createcurrentThe user configurable interface name which is an ASCII string up to 64 characters in length.
1.3.6.1.4.1.2785.2.3.3.2.1.18ColumnacEnetCfgLinkStateread-onlycurrentThe link state for this physical interface. Link state is determined by the Ethernet PHY logic and indicates whether or not the cable is properly connected and…
1.3.6.1.4.1.2785.2.3.3.2.1.19ColumnacEnetCfgAutoNegotiateread-createcurrentSetting this attribute to True(1) will force this interface to use Auto Negotiation to determine interface speed and duplexity. When set in this mode, the valu…
1.3.6.1.4.1.2785.2.3.3.2.1.20ColumnacEnetCfgPauseAdminModeread-writecurrentThis object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode fo…
1.3.6.1.4.1.2785.2.3.3.2.1.21ColumnacEnetCfgPauseOperModeread-onlycurrentThis object reflects the PAUSE mode currently in use on this interface, as determined by either (1) the result of the auto-negotiation function or (2) if auto-…
Type Definitions
NameSyntaxStatusDescription
AcEnetDuplexityINTEGER { full(1), half(2) }currentThe duplexity mode for the 802.3 interface. The interface can be configured for auto(1), full(2), or half(3) duplex mode. Auto is the default and when set will negotiate with the far end for proper mode.
AcEnetLinkStateINTEGER { unknown(0), link(1), nolink(2) }currentAttribute which identifies the current physical state of the link.
AcEnetSpeedINTEGER { mb10(1), mb100(2), gb1(3) }currentThe physical speed of this 802.3 port expressed as an integer enumeration.