MIB Viewer

APPIAN-PPORT-SERIAL-MIB

23 objects
Appian Serial Interface MIB for RS232 like interfaces.
Imported Objects
APPIAN-CHASSIS-MIBacChassisCurrentTime acChassisRingId
APPIAN-SMI-MIBAcAdminStatus AcNodeId AcOpStatus acPport
SNMPv2-SMIIpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.2785.2.3.2IdentityacSerialAppian Serial Interface MIB for RS232 like interfaces.
1.3.6.1.4.1.2785.2.3.2.0NodeacSerialTraps
1.3.6.1.4.1.2785.2.3.2.0.1NotificationacSerialLinkDownTrapcurrentThe Serial Port driver for this interface has detected the port to be in the down state.
1.3.6.1.4.1.2785.2.3.2.0.2NotificationacSerialLinkUpTrapcurrentThe Serial Port driver for this interface has detected the port to be in the down state.
1.3.6.1.4.1.2785.2.3.2.0.3NotificationacSerialStatsResetTrapcurrentThe statistics for this serial port have been reset to zero(0) and may cause problems for long term trending functions.
1.3.6.1.4.1.2785.2.3.2.0.4NotificationacSerialCfgErrorTrapcurrentA configuration request for this serial interface has been detected as incorrect or corrupted.
1.3.6.1.4.1.2785.2.3.2.1TableacSerialTablenot-accessiblecurrentEach Switch Control Processor supports a debug port as well as a management access or craft CLI port. The system will initialize the acSerialTable when the sys…
1.3.6.1.4.1.2785.2.3.2.1.1RowacSerialEntrynot-accessiblecurrentA row in the serial table contains configurable parameters and statistics for each serial interface on this platform.
1.3.6.1.4.1.2785.2.3.2.1.1.1ColumnacSerialNodeIdaccessible-for-notifycurrentThe node id is the id for this specific node in the OSAP ring.
1.3.6.1.4.1.2785.2.3.2.1.1.2ColumnacSerialSlotaccessible-for-notifycurrentThe control processor slot upon which the serial port is located.
1.3.6.1.4.1.2785.2.3.2.1.1.3ColumnacSerialPortaccessible-for-notifycurrentThe physical port number on acSerialEntrySlot where this connector is located.
1.3.6.1.4.1.2785.2.3.2.1.1.4ColumnacSerialAdminStatusread-writecurrentAppian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file f…
1.3.6.1.4.1.2785.2.3.2.1.1.5ColumnacSerialOpStatusread-onlycurrentThe current operational status of the serial port driver and services supporting this interface.
1.3.6.1.4.1.2785.2.3.2.1.1.6ColumnacSerialOpCoderead-onlycurrentProvides a detailed status code which can be used to isolate a problem or state condition reported in acSerialEntryOpStatus.
1.3.6.1.4.1.2785.2.3.2.1.1.7ColumnacSerialOpModeread-writecurrentDetermines the mode of operation for the serial port. If the serial port is using a raw terminal(1) or if we are to run PPP over this port as an alternative EM…
1.3.6.1.4.1.2785.2.3.2.1.1.8ColumnacSerialBaudRateread-writecurrentUser configured baud rate for use on the serial port. When set to Auto(1), the driver will negotiate baud rate.
1.3.6.1.4.1.2785.2.3.2.1.1.9ColumnacSerialParityread-writecurrentUser configurable partity which is used on the serial port.
1.3.6.1.4.1.2785.2.3.2.1.1.10ColumnacSerialNumberBitsread-writecurrentNumber of bits-per-byte used over the serial port.
1.3.6.1.4.1.2785.2.3.2.1.1.11ColumnacSerialIpAddressread-writecurrentThe IP Addressed used on the serial port during PPP sessions. If chSerialMode is equal to PPP-DHCP, this field is not needed otherwise a static IP Address is r…
1.3.6.1.4.1.2785.2.3.2.1.1.12ColumnacSerialIpSubnetread-writecurrentThe IP Subnet Mask in dotted notation for use on the serial port during PPP sessions.
1.3.6.1.4.1.2785.2.3.2.1.1.13ColumnacSerialRxOctetsread-onlycurrentThe number of bytes read by the serial port driver.
1.3.6.1.4.1.2785.2.3.2.1.1.14ColumnacSerialTxOctetsread-onlycurrentThe number of bytes transmitted by the serial port driver.
1.3.6.1.4.1.2785.2.3.2.1.1.15ColumnacSerialInterfaceNameread-writecurrentA user configurable ASCII name of up to 64 bytes in length, which is assigned for this interface.