ARISTA-XCVR-DWDM-MIB
19 objects
The MIB module for DWDM interface status and configuration on Arista devices.
Imported Objects
| ARISTA-SMI-MIB | aristaMibs |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.30065.3.19 | IdentityaristaXcvrDwdmMIB | The MIB module for DWDM interface status and configuration on Arista devices. | ||
| 1.3.6.1.4.1.30065.3.19.1 | TablearistaXcvrDwdmTable | not-accessible | current | This table contains DWDM configuration and status for DWDM-capable interfaces. |
| 1.3.6.1.4.1.30065.3.19.1.1 | RowaristaXcvrDwdmEntry | not-accessible | current | DWDM configuration and status for a single DWDM-capable interface. |
| 1.3.6.1.4.1.30065.3.19.1.1.1 | ColumnaristaXcvrDwdmOperChannel | read-only | current | The channel on which the transceiver is operating. If the channel is unknown, a value of 0 is returned. |
| 1.3.6.1.4.1.30065.3.19.1.1.2 | ColumnaristaXcvrDwdmOperGrid | read-only | current | The grid spacing with which the transceiver is operating, in MHz. If the grid spacing is unknown, a value of 0 is returned. |
| 1.3.6.1.4.1.30065.3.19.1.1.3 | ColumnaristaXcvrDwdmOperFrequency | read-only | current | The frequency at which the transceiver is operating, in MHz. This can be derived from channel and grid-spacing configuration if channel and grid are configured… |
| 1.3.6.1.4.1.30065.3.19.1.1.6 | ColumnaristaXcvrDwdmAdminChannel | read-write | current | The channel on which the transceiver is configured. 0 is returned if frequency is configured. |
| 1.3.6.1.4.1.30065.3.19.1.1.7 | ColumnaristaXcvrDwdmAdminGrid | read-write | current | The grid spacing with which the transceiver is configured, in MHz. The value may not be set to 0. 0 is returned if frequency is configured. |
| 1.3.6.1.4.1.30065.3.19.1.1.8 | ColumnaristaXcvrDwdmTunable | read-only | current | Whether or not the interface contains an optic capable of tuning its output frequency, False if no optic is inserted. |
| 1.3.6.1.4.1.30065.3.19.1.1.9 | ColumnaristaXcvrDwdmModulationFormat | read-only | current | The modulation format configured on the given interface. If the transceiver associated with an interface does not support modulation format configuration, then… |
| 1.3.6.1.4.1.30065.3.19.1.1.10 | ColumnaristaXcvrDwdmAdminFrequency | read-write | current | The frequency with which the transceiver is configured, in MHz. 0 if grid and/or channel are configured |
| 1.3.6.1.4.1.30065.3.19.1.1.11 | ColumnaristaXcvrDwdmUncorrectedCodewords | read-only | current | The Uncorrected Codewords Count associated with the transceiver. If reporting this value is not supported by the transceiver, the value will be 0. |
| 1.3.6.1.4.1.30065.3.19.2 | NodearistaXcvrDwdmMibConformance | |||
| 1.3.6.1.4.1.30065.3.19.2.1 | NodearistaXcvrDwdmMibCompliances | |||
| 1.3.6.1.4.1.30065.3.19.2.1.1 | CompliancearistaXcvrDwdmMibCompliance | current | The compliance statement for Arista switches that implement the ARISTA-XCVR-DWDM-MIB. | |
| 1.3.6.1.4.1.30065.3.19.2.2 | NodearistaXcvrDwdmMibGroups | |||
| 1.3.6.1.4.1.30065.3.19.2.2.1 | GrouparistaXcvrDwdmGroup | current | The collection of objects that provide per-interface transceiver specific information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AristaDwdmGridSpacing | Unsigned32 (0|6250|12500|25000|50000|100000) | current | The spacing, in MHz, between channels. The effective frequency can be derived by adding (channel - 1) * grid-spacing to the base frequency of 191.2 THz. The meaning of value 0 depends on the specific object with this sy… |
| AristaModulationFormat | INTEGER { notApplicable (0), none (1), qpsk (2), eightQam (3), sixteenQam (4) } | current | The modulation format of the transceiver. |