ARRIS-CER-VIDEO-VPME-MIB
56 objects
This MIB contains objects related to configuring Arris E6000 CER Video VPME Encryption configuration
Imported Objects
| ARRIS-CER-VIDEO-MIB | CerPID |
| ARRIS-MIB | arrisE6Cer |
| CADANT-CMTS-EQUIPMENT-MIB | trapCounter trapSeverity |
| CADANT-TC | AdminState InetAddressIPv4or6 |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.9.1.7 | IdentitycerVideoVpmeMIB | This MIB contains objects related to configuring Arris E6000 CER Video VPME Encryption configuration | ||
| 1.3.6.1.4.1.4115.1.9.1.7.0 | NodecerVideoVpmeTraps | |||
| 1.3.6.1.4.1.4115.1.9.1.7.0.1 | NotificationcerVideoEqmConnection | current | This trap is sent when the EQM connection fails. | |
| 1.3.6.1.4.1.4115.1.9.1.7.0.2 | NotificationcerVideoVpmeEqmProtocol | current | This trap is sent when a protocol error on the EQM interface is detected. | |
| 1.3.6.1.4.1.4115.1.9.1.7.0.3 | NotificationcerVideoVpmeProgramDelivery | current | This trap is sent when the delivery of an encrypted program is blocked because of a ECM provivioning failure. | |
| 1.3.6.1.4.1.4115.1.9.1.7.0.4 | NotificationcerVideoVpmePartialConfig | current | This trap is sent when a VPME instance is partially configured. The trap is cleared when the VPME instance is correctly configured (and set administratively UP… | |
| 1.3.6.1.4.1.4115.1.9.1.7.1 | TablecerVideoVpmeSdTable | not-accessible | current | This table specifies the VPME instance details. It specifies a collection of encrypted services which are in the same Security Domain and are therefore share a… |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1 | RowcerVideoVpmeSdEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.1 | ColumncerVideoVpmeSdIndex | read-create | current | The security-domain instance number uniquely identifies the VPME instance for the E6000. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.2 | ColumncerVideoVpmeSdDacId | read-create | current | DACID uniquely identifies the VPME instance for this SCS. The default value is 0. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.3 | ColumncerVideoVpmeSdAdminState | read-create | current | Set state of VPME instance for this security-domain. Setting the state to down will result in all sevices associated with this instance to be delivered in the … |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.4 | ColumncerVideoVpmeSdRowStatus | read-create | current | Show state of VPME instance |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.5 | ColumncerVideoVpmeSdEqmIpAddress | read-create | current | IP address of the host of the EQM. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.6 | ColumncerVideoVpmeSdEqmTcpPort | read-create | current | TCP port of the EQM. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.7 | ColumncerVideoVpmeSdSourceInterfaceIpv4IfIndex | read-create | current | The ifIndex of the interface from which all IPv4 packets are sourced. A value of 0 indicates no source interface override. |
| 1.3.6.1.4.1.4115.1.9.1.7.1.1.8 | ColumncerVideoVpmeSdSourceInterfaceIpv4Address | read-create | current | The IP address of the interface from which all IPv4 packets are sourced. A value of 0 indicates no source interface override. |
| 1.3.6.1.4.1.4115.1.9.1.7.2 | TablecerVideoVpmeSdStatsTable | not-accessible | current | This read-only table is used to monitor the current state of the VPME instance. Note there is a 1:1 mapping between an VPME instance and an security domain. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1 | RowcerVideoVpmeSdStatsEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.1 | ColumncerVideoVpmeSdStatsIndex | not-accessible | current | The security-domain instance number uniquely identifies the VPME instance for the E6000. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.2 | ColumncerVideoVpmeSdStatsEqmWakeup | read-only | current | Defines the number of seconds prior to a CW-Provision, that the EQM connection will be established. The default is 0 which means that the EQM connection remain… |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.3 | ColumncerVideoVpmeSdStatsEcmDuration | read-only | current | Defines defines the lifetime of the control word and ECM, in seconds. This value is signaled by the EQM and the E6000 must provision a new CW after this period… |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.4 | ColumncerVideoVpmeSdStatsEcmTimeout | read-only | current | Defines the countdown to the next CW provision event, in seconds. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.5 | ColumncerVideoVpmeSdStatsEcmRepPeriod | read-only | current | Defines the rate at which ECM datagrams must be generated on the egress video stream for each encrypted service, in milliseconds. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.6 | ColumncerVideoVpmeSdStatsTimeInOperState | read-only | current | Timestamp when the service became operational. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.7 | ColumncerVideoVpmeSdStatsEcmProvSuccCnt | read-only | current | Count of the total number of successful ECM provision interactions with the EQM |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.8 | ColumncerVideoVpmeSdStatsEcmProvFailCnt | read-only | current | Count of the total number of failed ECM provision interactions with the EQM. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.9 | ColumncerVideoVpmeSdStatsTimeoutCnt | read-only | current | Count of the total number of EQM response timeouts which have occurred. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.10 | ColumncerVideoVpmeSdStatsErrorCnt | read-only | current | Count of the total number of Error messages from the EQM. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.11 | ColumncerVideoVpmeSdStatsEqmFlapCnt | read-only | current | Count of the total number of connection failures to the EQM. This count does not include enable/disable of the VPME instance. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.12 | ColumncerVideoVpmeSdStatsVpmeOperState | read-only | current | Indicates the operational state of the VPME instance. |
| 1.3.6.1.4.1.4115.1.9.1.7.2.1.13 | ColumncerVideoVpmeSdStatsSzIndex | read-only | current | The instance of the streaming zone associated with the VPME instance. 0 is reserved for the unassigned case. |
| 1.3.6.1.4.1.4115.1.9.1.7.3 | TablecerVideoVpmeRuleTable | not-accessible | current | This is a table of configured Service Encryption rules. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1 | RowcerVideoVpmeRuleEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1.1 | ColumncerVideoVpmeRuleDacId | not-accessible | current | DACID uniquely identifies the VPME instance to which this service encryption rule is bound to. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1.2 | ColumncerVideoVpmeRuleTransportId | not-accessible | current | Transport ID. A 0 value is interpreted as a wildcard all match. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1.3 | ColumncerVideoVpmeRuleServiceId | read-create | current | Service ID. A 0 value is interpreted as a wildcard all match. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1.4 | ColumncerVideoVpmeRuleExclude | read-create | current | If this variable is set to TRUE then the service(s) matched by this rule are excluded from scrambling. |
| 1.3.6.1.4.1.4115.1.9.1.7.3.1.5 | ColumncerVideoVpmeRuleRowStatus | read-create | current | The values that control the creation/deletion of Service Encryption Rules. |
| 1.3.6.1.4.1.4115.1.9.1.7.4 | TablecerVideoVpmeProgTable | not-accessible | current | This read-only table is used to monitor the current set of encrypted active services. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1 | RowcerVideoVpmeProgEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.1 | ColumncerVideoVpmeProgDacId | accessible-for-notify | current | DACID uniquely identifies the VPME instance which is encrypting this service |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.2 | ColumncerVideoVpmeProgQamIfIndex | not-accessible | current | The ifIndex of the QAM channel associated with this service. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.3 | ColumncerVideoVpmeProgServiceId | accessible-for-notify | current | Service ID. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.4 | ColumncerVideoVpmeProgTransportId | read-only | current | Transport ID. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.5 | ColumncerVideoVpmeProgEcmPid | read-only | current | Identifies the PID on which the ECM datagrams for this service are delivered |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.6 | ColumncerVideoVpmeProgDeliveryState | read-only | current | The current encryption delivery state of the service. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.7 | ColumncerVideoVpmeProgDeliveryStateTime | read-only | current | The timestamp indicating when the service entered the current delivery state. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.8 | ColumncerVideoVpmeProgRuleTransportId | read-only | current | The configured transportID of the encryption rule which this service is matched against. |
| 1.3.6.1.4.1.4115.1.9.1.7.4.1.9 | ColumncerVideoVpmeProgRuleServiceId | read-only | current | The configured serviceID of the encryption rule which this service is matched against. |
| 1.3.6.1.4.1.4115.1.9.1.7.5 | NodecerVideoVpmeGroup | |||
| 1.3.6.1.4.1.4115.1.9.1.7.5.1 | ScalarcerVideoVpmeEqmSharedSecret | read-write | current | Shared secret used to secure the EQM/E6000 interface. The string is limited to a max of 64 ASCII characters. |
| 1.3.6.1.4.1.4115.1.9.1.7.6 | NodecerVideoVpmeTrapInfo | |||
| 1.3.6.1.4.1.4115.1.9.1.7.6.1 | ScalarcerVideoVpmeEqmStatus | accessible-for-notify | current | EQM connection status of E6000. |
| 1.3.6.1.4.1.4115.1.9.1.7.6.2 | ScalarcerVideoVpmeProgStatus | accessible-for-notify | current | Delivery state of a VPME encrypted program. |
| 1.3.6.1.4.1.4115.1.9.1.7.6.3 | ScalarcerVideoVpmeErrorStr | accessible-for-notify | current | Description of error encountered on the EQM interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CerVideoVpmeProgDeliveryState | INTEGER { clear(0), encrypted(1), blocked(2) } | current | Indicates the delivery state of a video service which matches a configured encryption. |