ARRIS-D5-VIDEO-MIB
391 objects
This MIB manages the MPEG / VIDEO software on the Arris CMTS.
Imported Objects
| ARRIS-MIB | arrisD5UEQam |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.8.1.1 | Identityd5MpegVideoMIB | This MIB manages the MPEG / VIDEO software on the Arris CMTS. | ||
| 1.3.6.1.4.1.4115.1.8.1.1.1 | Noded5VideoObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.1.1.1 | Noded5VideoControlGroup | |||
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.1 | Scalard5vControlPatInterval | read-write | current | Retransmission interval for PAT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.2 | Scalard5vControlPmtInterval | read-write | current | Retransmission interval for PMT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.3 | Scalard5vControlNitInterval | read-write | current | Retransmission interval for NIT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.4 | Scalard5vControlSdtInterval | read-write | current | Retransmission interval for SDT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.5 | Scalard5vControlOriginalNetworkId | read-write | current | DVB original-network-id to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.6 | Scalard5vControlNetworkId | read-write | current | DVB network-id to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.7 | Scalard5vControlNetworkName | read-write | current | DVB network-name to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.8 | Scalard5vControlTimeoutInterval | read-write | current | Timeout interval for incoming streams in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.9 | Scalard5vControlNitPID | read-write | current | PID value to use when generating NIT tables. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.10 | Scalard5vControlAutoGeneratePAT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.11 | Scalard5vControlAutoGenerateCAT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.12 | Scalard5vControlAutoGeneratePMT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.13 | Scalard5vControlAutoGenerateNIT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.14 | Scalard5vControlAutoGenerateSDT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.15 | Scalard5vControlAutoGenerateTDT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.16 | Scalard5vControlAutoGenerateTOT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.17 | Scalard5vControlPassThroughType | read-write | current | This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through m… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.18 | Scalard5vControlCatInterval | read-write | current | Retransmission interval for CAT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.19 | Scalard5vControlMaxProgramsPerQamChannel | read-write | current | Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.20 | Scalard5vControlAllowEsDvbPids | read-write | current | Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.21 | Scalard5vControlDefaultMappingScheme | read-write | current | The mapping scheme to be used for input transport-streams that have no associated static-configuration. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.22 | Scalard5vControlFastPsiTableUpdates | read-write | current | If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.23 | Scalard5vControlCycleOutputPids | read-write | current | If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.24 | Scalard5vControlOverSubscriptionSafetyMargin | read-write | current | The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring a… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.25 | Scalard5vControlOverSubscriptionRecoveryEnabled | read-write | current | If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It sel… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.26 | Scalard5vControlFilterCaDescMode | read-write | current | If this is configured, then the D5 will remove CA_Descriptors from incoming streams. This includes descriptors in CAT and PMT tables, and in the case of PMT it… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.27 | Scalard5vControlAllowTsidDuplication | read-write | current | If this is set to TRUE, then the D5 chassis can be configured with identical TSIDs on multiple QAM channels . Duplicate TSIDs should be used with some caution … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.28 | Scalard5vControlPcrDriftCorrection | read-write | deprecated | If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.29 | Scalard5vControlProgramOverSubscription | read-write | current | If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It sel… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.30 | Scalard5vControlProgramOverSubscriptionPeriod | read-write | deprecated | The period of time in seconds over which bandwidth is monitored before an over-subscription action is triggered. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.31 | Scalard5vControlProgramOverSubscriptionThreshold | read-write | current | The amount of bandwidth in percent by which a program stream may exceed it's configured limit before triggering the action specified by d5vControlProgramOverSu… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.32 | Scalard5vControlPreEncDetect | read-write | current | If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.33 | Scalard5vControlUtilPercentThresh | read-write | current | The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwi… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.34 | Scalard5vControlDefaultPidMappingProgramStart | read-write | current | The starting program-number to map to the start of the default mapping pid range. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.35 | Scalard5vControlDefaultPidMappingProgramCount | read-write | current | The number of programs to use for the default pid range. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.36 | Scalard5vControlDefaultPidMappingPidCount | read-write | current | The number of PIDs to use per-program. Determines the PID offset for each program number in the default range. There is a legal limit of 4096 on the values of … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.37 | Scalard5vControlOnProgramConflictDisconnectOlderStream | read-write | current | If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.38 | Scalard5vControlPcrDriftCorrectionGain | read-write | deprecated | Gain-control used in PCR-drift calculation. In units of 1/10000. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.39 | Scalard5vControlPcrDriftCorrectionUpperThreshold | read-write | deprecated | Upper-threshold used in PCR-drift calculation. In units of tenths of milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.40 | Scalard5vControlPcrDriftCorrectionLowerThreshold | read-write | deprecated | Lower-threshold used in PCR-drift calculation. In units of tenths of milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.1.41 | Scalard5vControlNullDroppingRate | read-write | deprecated | The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2 | Tabled5VideoQamStreamTable | not-accessible | current | This table stores MPEG Video related data on a per QAM channel basis. Ultimately this table will AUGMENT that supported by the QAM RF Manager but for the momen… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1 | Rowd5VideoQamStreamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.1 | Columnd5vQamNitPID | read-write | current | The PID value to us when generating NIT tables on this QAM channel. The default value is 16, the DVB requirement |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.2 | Columnd5vQamTransportStreamID | read-write | current | The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. The default value is specific to the slot number where the QAM channel is l… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.3 | Columnd5vQamTsMibIndex | read-only | current | The index of the outgoing Transport Stream on this QAM channel. A value of 0 means there are no MPEG Programs being transmitted at present, so there will be no… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.4 | Columnd5vQamTotalPatsTx | read-only | current | The total number of unique PAT Tables that have been generated for this QAM channel. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.5 | Columnd5vQamTotalProgramsTx | read-only | current | The accumulated number of Programs transmitted on this QAM channel. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.6 | Columnd5vQamCurrentProgramsTx | read-only | current | The number of Programs currently being transmitted on this QAM channel. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.7 | Columnd5vQamPatInterval | read-write | current | Retransmission interval for PAT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.8 | Columnd5vQamPmtInterval | read-write | current | Retransmission interval for PMT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.9 | Columnd5vQamNitInterval | read-write | current | Retransmission interval for NIT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.10 | Columnd5vQamSdtInterval | read-write | current | Retransmission interval for SDT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.11 | Columnd5vQamOriginalNetworkId | read-write | current | DVB original-network-id to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.12 | Columnd5vQamNetworkId | read-write | current | DVB network-id to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.13 | Columnd5vQamNetworkName | read-write | current | DVB network-name to be used in downstream . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.14 | Columnd5vQamPassThroughType | read-write | current | This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through m… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.15 | Columnd5vQamConfVideoSiStreamEnabled | read-write | current | Used to enable/disable video-si-stream configuration. At least one of UDP/src-IP/dest-IP must be non-zero for this video-si-stream rule to be functional. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.16 | Columnd5vQamConfVideoSiStreamUdpDest | read-write | current | Video-si-stream UDP destination port.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.17 | Columnd5vQamConfVideoSiStreamIpSrc | read-write | current | Video-si-stream IP source address.(A value of 0 in a rule means that the src-IP can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.18 | Columnd5vQamConfVideoSiStreamIpDest | read-write | current | Video-si-stream IP destination address.(A value of 0 in a rule means that the dest-IP can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.19 | Columnd5vQamActiveVideoSiStreamEnabled | read-only | current | Used to indicate if the QAM is currently passing a video-si-stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.20 | Columnd5vQamActiveVideoSiStreamUdpDest | read-only | current | Active video-si-stream UDP destination port. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.21 | Columnd5vQamActiveVideoSiStreamIpSrc | read-only | current | Active video-si-stream IP source address. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.22 | Columnd5vQamActiveVideoSiStreamIpDest | read-only | current | Active video-si-stream IP destination address. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.23 | Columnd5vQamStreamStatus | read-only | current | Current status of this QAM Transport stream |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.24 | Columnd5vQamTimeActivated | read-only | current | The value of sysUpTime when this stream was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.25 | Columnd5vQamTimeActive | read-only | current | The total time that MPEG stream has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.26 | Columnd5vQamTimeDeactivated | read-only | current | The value of sysUpTime when this stream was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.27 | Columnd5vQamAutoGeneratePAT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.28 | Columnd5vQamAutoGenerateCAT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.29 | Columnd5vQamAutoGeneratePMT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.30 | Columnd5vQamAutoGenerateNIT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.31 | Columnd5vQamAutoGenerateSDT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.32 | Columnd5vQamAutoGenerateTDT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.33 | Columnd5vQamAutoGenerateTOT | read-write | current | Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.34 | Columnd5vQamCatInterval | read-write | current | Retransmission interval for CAT tables in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.35 | Columnd5vQamMaxProgramsPerQamChannel | read-write | current | Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.36 | Columnd5vQamAllowEsDvbPids | read-write | current | Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.37 | Columnd5vQamDefaultMappingScheme | read-write | current | The mapping scheme to be used for input transport-streams that have no associated static-configuration. NOTE: the udpPortLegacy scheme cannot be configured aga… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.38 | Columnd5vQamFastPsiTableUpdates | read-write | current | If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.39 | Columnd5vQamCycleOutputPids | read-write | current | If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.40 | Columnd5vQamOverSubscribed | read-only | current | Indicates if the bandwidth of this QAM is currently over-subscribed. If the QAM is currently over-subscribed, some programs will suffer packet-loss. The affect… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.41 | Columnd5vQamOverSubscriptionSafetyMargin | read-write | current | The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring a… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.42 | Columnd5vQamOverSubscriptionRecoveryEnabled | read-write | current | If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It sel… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.43 | Columnd5vQamFilterCaDescMode | read-write | current | If this is configured, then the D5 will remove CA_Descriptors from incoming streams destined for this QAM. This includes descriptors in CAT and PMT tables, and… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.44 | Columnd5vQamPcrDriftCorrection | read-write | deprecated | If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.45 | Columnd5vQamPreEncDetect | read-write | current | If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.46 | Columnd5vQamUtilPercentThresh | read-write | current | The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwi… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.47 | Columnd5vQamOnProgramConflictDisconnectOlderStream | read-write | current | If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.48 | Columnd5vQamNullDroppingRate | read-write | deprecated | The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple |
| 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.49 | Columnd5vQamConfVideoSiStreamTsidRemap | read-write | current | The default behaviour of video-si streams is not to remap the ingress Transport_Stream_id so that the TS_ID in the PAT matches the value in the other SI tables… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3 | Tabled5VideoUdpIpStreamTable | not-accessible | current | This table displays the current incoming Transport Streams and can be configured with specific rules to override the default Program Number mappings. This tabl… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1 | Rowd5VideoUdpIpStreamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.1 | Columnd5vIpUdpIndex | read-create | current | The destination UDP Port to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the udp-port can be ANY value for patt… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.2 | Columnd5vIpSrcIndex | read-create | current | The SRC IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the src-IP can be ANY value for pa… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.3 | Columnd5vIpDestIndex | read-create | current | The DEST IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the dest-IP can be ANY value for … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.4 | Columnd5vIpRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.5 | Columnd5vIpTsMibIndex | read-only | current | The index of the entry in the d5VideoStreamTable for corresponding to this table entry. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.6 | Columnd5vIpMappingType | read-only | current | The type of entry, configured or dynamic. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.7 | Columnd5vIpConfQamIfIndex | read-create | current | The ifIndex of the QAM channel that this IP transport stream is configured to be mapped to. A value of 0 indicates that no mapping is configured. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.8 | Columnd5vIpStreamStatus | read-only | current | Current status of this IP Transport stream |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.9 | Columnd5vIpActiveQamIfIndex | read-only | current | The ifIndex of the QAM channel that this stream is currently mapped to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.10 | Columnd5vIpActiveChanContName | read-only | current | The name of the channel-container that this stream is currently mapped to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.11 | Columnd5vIpTimeActivated | read-only | current | The value of sysUpTime when this stream was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.12 | Columnd5vIpTimeActive | read-only | current | The total time that MPEG stream has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.13 | Columnd5vIpTimeDeactivated | read-only | current | The value of sysUpTime when this stream was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.14 | Columnd5vIpConfProgPassThroughEnabled | read-create | current | This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PROGs (as if pass-thro… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.15 | Columnd5vIpActiveProgPassThroughEnabled | read-only | current | Indicates if default PROG-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfProgPassThroughEnabled where a dynamic entry i… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.16 | Columnd5vIpConfPidPassThroughEnabled | read-create | current | This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.17 | Columnd5vIpActivePidPassThroughEnabled | read-only | current | Indicates if default PID-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfPidPassThroughEnabled where a dynamic entry is … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.18 | Columnd5vIpConfRedundantMulticast | read-create | current | This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid m… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.19 | Columnd5vIpActiveRedundantMulticast | read-create | current | Indicates if redundant-multicast is currently enabled for this stream. (May differ from the value of d5vIpConfRedundantMulticast where a dynamic entry is creat… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.20 | Columnd5vIpConfPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. This setting is only meaningf… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4 | Tabled5VideoStreamTable | not-accessible | current | This table stores basic information on all Transport Streams in the D5. It covers both incoming and outgoing ones. The MPEG Manager automatically creates any e… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1 | Rowd5VideoStreamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.1 | Columnd5vStreamDirectionIndex | read-only | current | The direction of this Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.2 | Columnd5vStreamTsMibIndex | read-only | current | The unique index that identifies the Transport Stream within the D5. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.3 | Columnd5vStreamPatVersion | read-only | current | The version number of the current PAT Table for this Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.4 | Columnd5vStreamTsID | read-only | current | The MPEG transport_stream_id in the PAT tables on this Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.5 | Columnd5vStreamProgramCount | read-only | current | The number of Programs currently in this Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.6 | Columnd5vStreamPatCurrTimeCreated | read-only | current | The value of sysUpTime when the current PAT was created. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.7 | Columnd5vStreamPatCurrTimeActive | read-only | current | The total time the current PAT has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.8 | Columnd5vStreamPatPrevTimeCreated | read-only | current | The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.9 | Columnd5vStreamCatVersion | read-only | current | The version number of the current CAT Table for this Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.10 | Columnd5vStreamCatCurrTimeCreated | read-only | current | The value of sysUpTime when the current CAT was created. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.11 | Columnd5vStreamCatCurrTimeActive | read-only | current | The total time the current CAT has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.12 | Columnd5vStreamCatPrevTimeCreated | read-only | current | The value of sysUpTime when the predecessor of this CAT was created. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5 | Tabled5VideoStreamProgramTable | not-accessible | current | This table stores basic information for each Program in each Transport Stream known to the D5. Each entry in d5VideoStreamTable will have at least one entry in… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1 | Rowd5VideoStreamProgramEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.1 | Columnd5vStreamProgTsMibIndex | read-only | current | The unique index that identifies the Transport Stream containing this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.2 | Columnd5vStreamProgIndex | read-only | current | The Program Number for this program within the associated Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.3 | Columnd5vStreamProgPmtVersion | read-only | current | The version number of the current PMT Table for this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.4 | Columnd5vStreamProgPmtPid | read-only | current | The MPEG PID used for the PMT Table for this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.5 | Columnd5vStreamProgPcrPid | read-only | current | The MPEG PID used to for the PCR for this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.6 | Columnd5vStreamProgEsCount | read-only | current | The number of Elementary Streams currently in this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.7 | Columnd5vStreamProgDescCount | read-only | current | The number of Descriptors in the PMT 'first_loop' for this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.8 | Columnd5vStreamPmtCurrTimeCreated | read-only | current | The value of sysUpTime when the current PMT was created. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.9 | Columnd5vStreamPmtCurrTimeActive | read-only | current | The total time the current PMT has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.10 | Columnd5vStreamPmtPrevTimeCreated | read-only | current | The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.11 | Columnd5vStreamProgBitrate | read-only | current | The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6 | Tabled5VideoStreamEsTable | not-accessible | current | This table stores basic information for each Elementary Stream in each Transport Stream known to the D5. Each entry in d5VideoProgTable will have at least one … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1 | Rowd5VideoStreamEsEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.1 | Columnd5vStreamEsTsMibIndex | read-only | current | The unique index that identifies the Transport Stream containing this Program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.2 | Columnd5vStreamEsProgIndex | read-only | current | The Program Number for this program within the associated Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.3 | Columnd5vStreamEsPidIndex | read-only | current | The MPEG PID used for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.4 | Columnd5vStreamEsType | read-only | current | The type of this Elementary Streams. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.5 | Columnd5vStreamEsDescCount | read-only | current | The number of Descriptors in the PMT 'second_loop' for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7 | Tabled5VideoStreamDescTable | not-accessible | current | This table stores MPEG Descriptors for each Elementary Stream and Program known to the D5. The PMT PID is used to index Program Descriptors while the Elementar… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1 | Rowd5VideoStreamDescEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.1 | Columnd5vStreamDescTsMibIndex | read-only | current | The unique index that identifies the Transport Stream containing this Descriptor. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.2 | Columnd5vStreamDescPidIndex | read-only | current | The MPEG PID used for this Elementary Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.3 | Columnd5vStreamDescIndex | read-only | current | The Descriptor index. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.4 | Columnd5vStreamDescTag | read-only | current | The Descriptor tag. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.5 | Columnd5vStreamDescLen | read-only | current | The Descriptor length. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.6 | Columnd5vStreamDescData | read-only | current | The Descriptor data. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.8 | Tabled5VideoLookupTsidToIfIndexTable | not-accessible | current | This table maps the transport_stream_id of a Transport Stream on a QAM channel to the ifIndex for that channel. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.8.1 | Rowd5VideoLookupTsidToIfIndexEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.8.1.1 | Columnd5vLookupTsidIfIndex | read-only | current | The ifIndex for the QAM channel transmitting this transport_stream_id. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.9 | Tabled5VideoLookupTsMibIndexToIfIndexTable | not-accessible | current | This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoin… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.9.1 | Rowd5VideoLookupTsMibIndexToIfIndexEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.9.1.1 | Columnd5vLookupTsIndexIfIndex | read-only | current | The ifIndex for the QAM channel transmitting this TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.10 | Tabled5VideoLookupQamTsMibIndexToInTsMibIndexTable | not-accessible | current | This table maps the TransportStreamIndex of a Transport Stream on a QAM channel to the corresponding incoming TransportStreamIndexes. d5vTsMibIndex - an outgoi… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.10.1 | Rowd5VideoLookupQamTsMibIndexToInTsMibIndexEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.10.1.1 | Columnd5vLookupInTsMibIndex | read-only | current | MIB TsIndex for an incoming transport stream(IP). |
| 1.3.6.1.4.1.4115.1.8.1.1.1.11 | Tabled5VideoLookupTsMibIndexToUdpIpTable | not-accessible | current | This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.11.1 | Rowd5VideoLookupTsMibIndexToUdpIpEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.1 | Columnd5vLookupTsMibIndexUdpPort | read-only | current | The UDP receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.2 | Columnd5vLookupTsMibIndexIpAddressSrc | read-only | current | The SRC IP address receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.3 | Columnd5vLookupTsMibIndexIpAddressDest | read-only | current | The DEST IP address receiving the Transport Stream for TransportStreamIndex. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12 | Tabled5VideoUdpIpStreamProgRemapTable | not-accessible | current | This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1 | Rowd5VideoUdpIpStreamProgRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.1 | Columnd5vProgRemapUdpIndex | read-only | current | The destination UDP Port of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.2 | Columnd5vProgRemapIpSrcIndex | read-only | current | The SRC IP address of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.3 | Columnd5vProgRemapIpDestIndex | read-only | current | The DEST IP address of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.4 | Columnd5vProgRemapInProgIndex | read-only | current | The incoming Program value related to this Program remapping. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.5 | Columnd5vProgRemapActiveQamIfIndex | read-only | current | The ifIndex of the QAM channel that this Program remapping applies to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.6 | Columnd5vProgRemapOutProg | read-only | current | The output Program value related to this Program mapping rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.7 | Columnd5vProgRemapStatus | read-only | current | Current status of this Program - whether active or not |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.8 | Columnd5vProgRemapActiveProgType | read-only | current | The type of Program whether PSI or Elementary stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.9 | Columnd5vProgRemapTimeActivated | read-only | current | The value of sysUpTime when this Program was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.10 | Columnd5vProgRemapTimeActive | read-only | current | The total time that the Program has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.11 | Columnd5vProgRemapTimeDeactivated | read-only | current | The value of sysUpTime when this Program was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13 | Tabled5VideoUdpIpStreamPidRemapTable | not-accessible | current | This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1 | Rowd5VideoUdpIpStreamPidRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.1 | Columnd5vPidRemapUdpIndex | read-only | current | The destination UDP Port of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.2 | Columnd5vPidRemapIpSrcIndex | read-only | current | The SRC IP address of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.3 | Columnd5vPidRemapIpDestIndex | read-only | current | The DEST IP address of the incoming TS. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.4 | Columnd5vPidRemapInPidIndex | read-only | current | The incoming PID value related to this PID remapping. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.5 | Columnd5vPidRemapActiveQamIfIndex | read-only | current | The ifIndex of the QAM channel that this PID remapping applies to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.6 | Columnd5vPidRemapOutPid | read-only | current | The output PID value related to this PID mapping rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.7 | Columnd5vPidRemapStatus | read-only | current | Current status of this PID - whether active or not |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.8 | Columnd5vPidRemapActivePidType | read-only | current | The type of PID whether PSI or Elementary stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.9 | Columnd5vPidRemapTimeActivated | read-only | current | The value of sysUpTime when this PID was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.10 | Columnd5vPidRemapTimeActive | read-only | current | The total time that the PID has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.11 | Columnd5vPidRemapTimeDeactivated | read-only | current | The value of sysUpTime when this PID was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14 | Tabled5VideoRuleQamProgRemapTable | not-accessible | current | Table contains list of qam-channel based configured program remapping rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1 | Rowd5VideoRuleQamProgRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.1 | Columnd5vRQamProgRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.2 | Columnd5vRQamProgOutProg | read-create | current | The output Program value related to this rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.3 | Columnd5vRQamProgMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.4 | Columnd5vRQamProgMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.5 | Columnd5vRQamProgPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15 | Tabled5VideoRuleQamProgFilterTable | not-accessible | current | Table contains list of qam-channel based configured program filter rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15.1 | Rowd5VideoRuleQamProgFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.1 | Columnd5vRQamProgFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.2 | Columnd5vRQamProgFiltMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.3 | Columnd5vRQamProgFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.4 | Columnd5vRQamProgFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16 | Tabled5VideoRuleQamPidRemapTable | not-accessible | current | Table contains list of qam-channel based configured PID remapping rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1 | Rowd5VideoRuleQamPidRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.1 | Columnd5vRQamPidRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.2 | Columnd5vRQamPidOutPid | read-create | current | The output PID value related to this rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.3 | Columnd5vRQamPidLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.4 | Columnd5vRQamPidMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.5 | Columnd5vRQamPidPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17 | Tabled5VideoRuleQamPidFilterTable | not-accessible | current | Table contains list of qam-channel based configured PID filter rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17.1 | Rowd5VideoRuleQamPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.1 | Columnd5vRQamPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.2 | Columnd5vRQamPidFiltLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.3 | Columnd5vRQamPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.4 | Columnd5vRQamPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18 | Tabled5VideoRuleUdpIpProgFilterTable | not-accessible | current | Table contains list of UDP/IP based configured program filter rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18.1 | Rowd5VideoRuleUdpIpProgFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.1 | Columnd5vRUdpIpProgFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.2 | Columnd5vRUdpIpProgFiltMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.3 | Columnd5vRUdpIpProgFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.4 | Columnd5vRUdpIpProgFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19 | Tabled5VideoRuleUdpIpPidFilterTable | not-accessible | current | Table contains list of UDP/IP based configured PID filter rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19.1 | Rowd5VideoRuleUdpIpPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.1 | Columnd5vRUdpIpPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.2 | Columnd5vRUdpIpPidFiltLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.3 | Columnd5vRUdpIpPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.4 | Columnd5vRUdpIpPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20 | Tabled5VideoRuleUdpIpProgRemapTable | not-accessible | current | Table contains list of udp/ip based configured program remapping rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1 | Rowd5VideoRuleUdpIpProgRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.1 | Columnd5vRUdpIpProgUdpIndex | read-create | current | The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.2 | Columnd5vRUdpIpProgIpSrcIndex | read-create | current | The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.3 | Columnd5vRUdpIpProgIpDestIndex | read-create | current | The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.4 | Columnd5vRUdpIpProgInProgIndex | read-create | current | The incoming Program value related to this Program remapping. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.5 | Columnd5vRUdpIpProgRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.6 | Columnd5vRUdpIpProgOutProg | read-create | current | The output Program value related to this Program mapping rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.7 | Columnd5vRUdpIpProgMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.8 | Columnd5vRUdpIpProgMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.9 | Columnd5vRUdpIpProgPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.10 | Columnd5vRUdpIpProgExpectedBitrate | read-create | current | The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21 | Tabled5VideoRuleUdpIpPidRemapTable | not-accessible | current | Table contains list of udp/ip based configured pid remapping rules. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1 | Rowd5VideoRuleUdpIpPidRemapEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.1 | Columnd5vRUdpIpPidUdpIndex | read-create | current | The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.2 | Columnd5vRUdpIpPidIpSrcIndex | read-create | current | The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.3 | Columnd5vRUdpIpPidIpDestIndex | read-create | current | The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.4 | Columnd5vRUdpIpPidInPidIndex | read-create | current | The incoming PID value related to this PID remapping. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.5 | Columnd5vRUdpIpPidRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.6 | Columnd5vRUdpIpPidOutPid | read-create | current | The output PID value related to this PID mapping rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.7 | Columnd5vRUdpIpPidMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.8 | Columnd5vRUdpIpPidMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.9 | Columnd5vRUdpIpPidPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22 | Tabled5VideoUdpIpSiStreamTable | not-accessible | current | This table displays the statically allocated SI-streams. SI-streams are dedicated IP streams that provide SI table for a particular QAM channel. The data in an… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1 | Rowd5VideoUdpIpSiStreamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.1 | Columnd5vIpUdpSiIndex | read-create | current | The destination UDP Port to be mapped to the specified QAM Channel and Program Number. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.2 | Columnd5vIpSrcSiIndex | read-create | current | The SRC IP address of the SI TS to be mapped to the specified QAM Channel and Program Number. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.3 | Columnd5vIpDestSiIndex | read-create | current | The DEST IP address of the SI TS to be mapped to the specified QAM Channel and Program Number. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.4 | Columnd5vIpSiRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.5 | Columnd5vIpSiTsMibIndex | read-only | current | The index of the entry in the d5VideoStreamTable for corresponding to this table entry. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.6 | Columnd5vIpSiConfQamIfIndex | read-create | current | The ifIndex of the QAM channel that this SI-stream is configured to be mapped to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.7 | Columnd5vIpSiConfChanContName | read-create | current | The name of the channel-container that this SI-stream is configured to be mapped to. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.8 | Columnd5vIpSiStreamStatus | read-only | current | Current status of this IP SI Transport stream |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.9 | Columnd5vIpSiTimeActivated | read-only | current | The value of sysUpTime when this stream was last activated. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.10 | Columnd5vIpSiTimeActive | read-only | current | The total time that MPEG stream has been active. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.11 | Columnd5vIpSiTimeDeactivated | read-only | current | The value of sysUpTime when this stream was last deactivated. Zero if not-known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.12 | Columnd5vIpSiPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.13 | Columnd5vIpSiCopyback | read-only | current | This is used to setup the SI stream as an EAS stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30 | Tabled5VideoChannelContainerTable | not-accessible | current | Table contains list of channel-containers that can be used to group individual QAM-channels together. Channel-containers can serve multiple purposes: - group q… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1 | Rowd5VideoChannelContainerEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.1 | Columnd5vChanContName | read-create | current | Channel-container identifier. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.2 | Columnd5vChanContRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.3 | Columnd5vChanContServiceId | read-create | current | Common program-number used for virtual-programs in this channel-container. (may be set to 0 to indicate an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.4 | Columnd5vChanContPid | read-create | current | Common PID used for EMM or PDG data in this channel- container. (may be set to 0 to indicate an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.5 | Columnd5vChanContPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31 | Tabled5VideoChannelContainerQamTable | not-accessible | current | Table contains list of QAM channel-container group memberships. A single QAM can be a member of multiple replication groups. A single QAM can also be a member … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1 | Rowd5VideoChannelContainerQamEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.1 | Columnd5vChanContQamIfIndex | read-create | current | The ifIndex of the QAM channel. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.2 | Columnd5vChanContQamTsidIndex | read-write | current | The MPEG transport_stream_id of the QAM-channel. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.3 | Columnd5vChanContQamProgIndex | read-create | current | The output program number associated with this membership rule. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.4 | Columnd5vChanContQamRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.5 | Columnd5vChanContQamPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32 | Tabled5VideoChannelContainerVirtProgTable | not-accessible | current | Table contains list of virtual programs with their associated channel-container names. Virtual programs are used for creating replications where individual inp… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1 | Rowd5VideoChannelContainerVirtProgEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.1 | Columnd5vChanContVProgUdpIndex | read-create | current | The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.2 | Columnd5vChanContVProgSrcIpIndex | read-create | current | The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.3 | Columnd5vChanContVProgDestIpIndex | read-create | current | The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.4 | Columnd5vChanContVProgRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.5 | Columnd5vChanContVProgName | read-create | current | Channel-container identifier. Must match an entry in the d5VideoChannelContainerTable table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.6 | Columnd5vChanContVProgConfProgPassThroughEnabled | read-create | current | This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PIDs (as if pass-throu… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.7 | Columnd5vChanContVProgConfPidPassThroughEnabled | read-create | current | This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.8 | Columnd5vChanContVProgConfRedundantMulticast | read-create | current | This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid m… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.9 | Columnd5vChanContVProgPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.10 | Columnd5vChanContVProgExpectedBitrate | read-create | current | The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is … |
| 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.11 | Columnd5vChanContVProgConfVideoSiStreamEnabled | read-create | current | Used to configure this virtual-program to be treated as a video-si-stream. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33 | Tabled5VideoQamJitterTable | not-accessible | current | This Table contains list of rules that regulate the amount of jitter buffering in milliseconds that is used used for video programs. Can be used to increase ji… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1 | Rowd5VideoQamJitterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.1 | Columnd5vQamJitterIfIndex | read-create | current | The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.2 | Columnd5vQamJitterServiceId | read-create | current | The output program number associated with this rule. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.3 | Columnd5vQamJitterThreshBitrateLow | read-write | current | The lower bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified lower valu… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.4 | Columnd5vQamJitterThreshBitrateHigh | read-write | current | The upper bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified upper valu… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.5 | Columnd5vQamJitterMilliseconds | read-write | current | The setting for jitter-buffer length in milliseconds for video programs matching this rule. Can be set to a small value to reduce latency through the box, or s… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.6 | Columnd5vQamJitterRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.7 | Columnd5vQamJitterPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34 | Tabled5VideoQamJitterStatusTable | not-accessible | current | This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the activ… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1 | Rowd5VideoQamJitterStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.1 | Columnd5QamJitterStatusIfIndex | read-only | current | The ifIndex of the QAM channel associated with this entry. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.2 | Columnd5QamJitterStatusServiceId | read-only | current | The output program number associated with this entry. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.3 | Columnd5QamJitterStatusCurrStatus | read-only | current | The status of the jitter buffer for this program. idle - waiting for input TS packets fillingBuffer - waiting for the dejitter buffer to fill up for normal ope… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.4 | Columnd5QamJitterStatusUnderflowCount | read-only | current | Number of times the jitter buffer has underflowed during the lifetime of this program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.5 | Columnd5QamJitterStatusOverflowCount | read-only | current | Number of times the jitter buffer has overflowed during the lifetime of this program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.6 | Columnd5QamJitterStatusBufferLengthInBytes | read-only | current | The number of bytes in-use for the jitter buffer of this program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.7 | Columnd5QamJitterStatusFixedBufferLength | read-only | current | Indicates if the jitter buffer for this program consists of a fixed number of bytes, or if the QAM-FPGA is configured to reallocate memory dynamically as the p… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.8 | Columnd5QamJitterStatusBufferLengthInMs | read-only | current | The size of the jitter buffer for this program in milliseconds. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.9 | Columnd5vQamJitterStatusBitrate | read-only | current | The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.10 | Columnd5QamJitterStatusResetQueue | read-write | current | Write a value of TRUE to empty the jitter buffer, (re)initialize the active buffer-length to the configured value in the d5VideoQamJitterTable, and reset the j… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.11 | Columnd5QamJitterStatusBufferSizeInBytes | read-only | current | The number of bytes allocated for the jitter buffer of this program. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40 | Tabled5VideoQamLogTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1 | Rowd5VideoQamLogEntry | not-accessible | current | An entry (conceptual row) in the d5QamLogTable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.1 | Columnd5vQamLogDateTimeIndex | not-accessible | current | The Date/Time of event occurance. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.2 | Columnd5vQamLogSubIndex | read-only | current | Index used to address QAM event logs which occur at the same time. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.3 | Columnd5vQamLogSlotNum | read-only | current | QAM card associated with a particular event. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.4 | Columnd5vQamLogPortNum | read-only | current | QAM card port number associated with a particular event. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.5 | Columnd5vQamLogQamNum | read-only | current | QAM card QAM number associated with a particular event. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.6 | Columnd5vQamLogState | read-only | current | Current state of the Event Log |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.7 | Columnd5vQamLogDuration | read-only | current | Event Log duration in mSecs (only valid for START/STOP type entries) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.8 | Columnd5vQamLogDescription | read-only | current | QAM event description. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41 | Tabled5VideoRuleQamSiStreamGhostPidFilterTable | not-accessible | current | Table contains list of qam-channel based configured ghost PID rules . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41.1 | Rowd5VideoRuleQamSiStreamGhostPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.1 | Columnd5vRQamSiStreamGhostPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.2 | Columnd5vRQamSiStreamGhostPidFiltLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.3 | Columnd5vRQamSiStreamGhostPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.4 | Columnd5vRQamSiStreamGhostPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42 | Tabled5VideoRuleSiStreamGhostPidFilterTable | not-accessible | current | Table contains list of configured ghost PID filter rules. . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not reasonabl… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42.1 | Rowd5VideoRuleSiStreamGhostPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.1 | Columnd5vRSiStreamGhostPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.2 | Columnd5vRSiStreamGhostPidFiltLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.3 | Columnd5vRSiStreamGhostPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.4 | Columnd5vRSiStreamGhostPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43 | Tabled5VideoQamCaDescFiltTable | not-accessible | current | This Table contains a list of rules that regulate the filtering of ca-descriptors from input CAT and PMT tables based on specific ca-system-id values. . |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1 | Rowd5VideoQamCaDescFiltEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.1 | Columnd5vQamCaDescFiltIfIndex | read-create | current | The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.2 | Columnd5vQamCaDescFiltSysId | read-create | current | The CA-system-ID value associated with this rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.3 | Columnd5vQamCaDescFiltCaDesc | read-create | current | Controls the filtering of descriptors from the CAT table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.4 | Columnd5vQamCaDescFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.5 | Columnd5vQamCaDescFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44 | Tabled5VideoRuleQamStreamGhostPidTable | not-accessible | current | Table contains list of qam-channel based configured ghost PID rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1 | Rowd5VideoRuleQamStreamGhostPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.1 | Columnd5vRQamStreamGhostPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.2 | Columnd5vRQamStreamGhostPidFiltOutPid | read-create | current | The output PID value related to this rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.3 | Columnd5vRQamStreamGhostPidFiltLastMatchTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.4 | Columnd5vRQamStreamGhostPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.5 | Columnd5vRQamStreamGhostPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45 | Tabled5VideoRuleStreamGhostPidTable | not-accessible | current | Table contains list of configured ghost PID filter rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must be taken n… |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1 | Rowd5VideoRuleStreamGhostPidFilterEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.1 | Columnd5vRStreamGhostPidFiltUdpIndex | read-create | current | The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.2 | Columnd5vRStreamGhostPidFiltIpSrcIndex | read-create | current | The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.3 | Columnd5vRStreamGhostPidFiltIpDestIndex | read-create | current | The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.4 | Columnd5vRStreamGhostPidFiltInPidIndex | read-create | current | The incoming ghost PID value related to this rule. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.5 | Columnd5vRStreamGhostPidFiltRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.6 | Columnd5vRStreamGhostPidFiltMatchLastTime | read-only | current | The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.7 | Columnd5vRStreamGhostPidFiltMatchCount | read-only | current | The number of times this rule was matched/used at run-time. Zero if not-applicable. |
| 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.8 | Columnd5vRStreamGhostPidFiltPersistence | read-create | current | This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| D5DescriptorBuffer | OCTET STRING (SIZE (0..255)) | current | A buffer that contains MPEG Descriptor data. |
| D5DescriptorIndex | INTEGER ( 1..65535 ) | current | An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream. |
| D5DescriptorTag | INTEGER ( 1..255 ) | current | A convenient type definition for MPEG Descriptor Tags values. |
| D5ElementaryStreamType | INTEGER ( 1..255 ) | current | A convenient type definition for MPEG Elementary Stream Type values. |
| D5GeneratePat | INTEGER { enable-auto(1), disable(2), force-nit-entry(3) } | current | Defines the controls on the PAT generation: enable-auto Enable the auto-generation of the PAT table disable Disable to local generation of the PAT table force-nit-entry Enable the auto-generation of the PAT table but fo… |
| D5MappingType | INTEGER { default(1), dynamic(2), static(3) } | current | A convenient type definition for mapping rules. These can be as follows static - configured by the operator to over-ride the default mapping dynamic - allocated by Q5 on the fly and currently in operation default - repr… |
| D5PersistenceType | INTEGER { nonVolatile(0), volatile(1) } | current | A convenient type definition that defines whether or not a rule should be saved persistently across system reboots. |
| D5PID | INTEGER ( 0..8192 ) | current | A convenient type definition for MPEG PID values. |
| D5PidStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG PID status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - no… |
| D5PidType | INTEGER { es(1), psi(2), ghost(3) } | current | A convenient type definition for PID - whether PSI or ES. |
| D5Program | Unsigned32 | current | A convenient type definition for MPEG Program Number values. |
| D5ProgStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive … |
| D5ProgType | INTEGER { es(1), psi(2) } | current | A convenient type definition for Programs - whether PSI or ES. |
| D5RemappingRuleSourceType | INTEGER { qam(1), udpIp(2), nsg(3), passThrough(4), default(5) } | current | A convenient type definition for the source of rule used to create a dynamic PID/PROG remapping qam - A Qam remap rule was used to create the remapping udpIp - A Udp/IP rule was used to create the remapping nsg - Remapp… |
| D5TransportStreamDirection | INTEGER { incoming(1), outgoing(2) } | current | A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the D5, typically over IP outgoing - the Transport Stream is being generated by the D5 and sent t… |
| D5TransportStreamIndex | INTEGER ( 1..65535 ) | current | An identifier that uniquely identifies an MPEG Transport Stream in the D5 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS. |
| D5TransportStreamStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states … |
| D5VideoChannelContainerNameType | DisplayString (SIZE (0..16)) | current | A unique name that identifies a particular channel-container. |
| D5VideoDefaultMappingScheme | INTEGER { disabled(1), udpPort(2), udpPortLegacy(3) } | current | A convenient type definition for the default-mappings that are supported by the D5. The default-mapping schemes are used to identify which QAM to map an input TS to, where the TS has no static configuration associated w… |
| D5VideoProgramOverSubscriptionAction | INTEGER { none(0), notification(1), recover(2) } | current | Defines the status of the log entry: none No action is performed, program monitoring is not enabled. notification An event is logged indicating that the program has exceeded it's bandwidth. recover Action will be taken … |
| D5VideoQamLogQamState | INTEGER { one-shot(1), active(2), complete(3) } | current | Defines the status of the log entry: one-shot Log entry describes a one off event (no START/STOP attributes) active Log entry is currently active. This means that the START event has occured and the STOP event is pendin… |