ART-MIB
78 objects
The MIB module for Application Response Time measurement.
Imported Objects
| NETSCOUT-MIB MISSING | -- netscout2 |
| RMON-MIB | OwnerString |
| RMON2-MIB | DataSource protocolDirEntry protocolDirLocalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.141 | Nodefrontier | |||
| 1.3.6.1.4.1.141.2 | Nodemibdoc2 | |||
| 1.3.6.1.4.1.141.2.1 | Nodenetscout2 | |||
| 1.3.6.1.4.1.141.2.1.5 | Identityart | The MIB module for Application Response Time measurement. | ||
| 1.3.6.1.4.1.141.2.1.5.1 | TableprotocolDir2Table | not-accessible | current | Contains the ART augmentations to RMON-2. |
| 1.3.6.1.4.1.141.2.1.5.1.1 | RowprotocolDir2Entry | not-accessible | current | Contains the ART augmentations to RMON-2. |
| 1.3.6.1.4.1.141.2.1.5.1.1.1 | ColumnprotocolDir2ArtConfig | read-create | current | This object describes and configures the probe's support for application response time monitoring for the protocol. When the probe creates entries in this tabl… |
| 1.3.6.1.4.1.141.2.1.5.2 | TableartControlTable | not-accessible | current | This table lists the data sources (typically, probe interfaces) for which application response time collection is enabled, and additionally controls the genera… |
| 1.3.6.1.4.1.141.2.1.5.2.1 | RowartControlEntry | not-accessible | current | A conceptual row in the artControlTable. Creation of a row enables ART collection and report generation for the corresponding data source. The artControlRspTim… |
| 1.3.6.1.4.1.141.2.1.5.2.1.1 | ColumnartControlIndex | not-accessible | current | A unique index for this artControlEntry. |
| 1.3.6.1.4.1.141.2.1.5.2.1.2 | ColumnartControlDataSource | read-create | current | The source of data for application response-time collection, i.e., the data source (typically, a probe interface) for which ART statistics are to be collected … |
| 1.3.6.1.4.1.141.2.1.5.2.1.3 | ColumnartControlTimeRemaining | read-create | current | The number of seconds remaining in the current report interval. When this value reaches zero, the probe deletes any existing reports for the associated data so… |
| 1.3.6.1.4.1.141.2.1.5.2.1.4 | ColumnartControlDuration | read-only | current | This object is used to latch the value of artTimeRemaining for automatic collection restart at the end of a collection interval. |
| 1.3.6.1.4.1.141.2.1.5.2.1.5 | ColumnartControlRspTime1 | read-create | current | The first of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus i… |
| 1.3.6.1.4.1.141.2.1.5.2.1.6 | ColumnartControlRspTime2 | read-create | current | The second of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus … |
| 1.3.6.1.4.1.141.2.1.5.2.1.7 | ColumnartControlRspTime3 | read-create | current | The third of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus i… |
| 1.3.6.1.4.1.141.2.1.5.2.1.8 | ColumnartControlRspTime4 | read-create | current | The fourth of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus … |
| 1.3.6.1.4.1.141.2.1.5.2.1.9 | ColumnartControlRspTime5 | read-create | current | The fifth of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus i… |
| 1.3.6.1.4.1.141.2.1.5.2.1.10 | ColumnartControlRspTime6 | read-create | current | The sixth of six time values used to categorize the response times observed during the report interval. This object may not be changed while artControlStatus i… |
| 1.3.6.1.4.1.141.2.1.5.2.1.11 | ColumnartControlRspTimeout | read-create | current | The maximum interval that the probe will wait for a server response to a client request. Requests older than this value are abandoned, and counted as artTimeou… |
| 1.3.6.1.4.1.141.2.1.5.2.1.12 | ColumnartControlRptStartTime | read-only | current | The time at which collection of the currently available reports was started. |
| 1.3.6.1.4.1.141.2.1.5.2.1.13 | ColumnartControlRequestedSize | read-create | current | The maximum number of report rows to be generated in the artTable for the associated data source. If set to -1, the maximum number of report rows shall be dete… |
| 1.3.6.1.4.1.141.2.1.5.2.1.14 | ColumnartControlGrantedSize | read-only | current | The maximum number of report rows in the artTable granted by the probe for the associated data source. The value of this object may be less than the requested … |
| 1.3.6.1.4.1.141.2.1.5.2.1.15 | ColumnartControlGeneratedRpts | read-only | current | The number of report sets that have been generated by this entry. The NMS may use this value to poll for the availability of a new report set. It may also samp… |
| 1.3.6.1.4.1.141.2.1.5.2.1.16 | ColumnartControlDroppedFrames | read-only | current | The total number of frames which were received by the probe and therefore not accounted for in the *StatsDropEvents, but for which the probe chose not to count… |
| 1.3.6.1.4.1.141.2.1.5.2.1.17 | ColumnartControlOwner | read-create | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.141.2.1.5.2.1.18 | ColumnartControlStatus | read-create | current | The status of this control table entry. An entry must not exist in the active state unless all objects in the entry have an appropriate value. If this object i… |
| 1.3.6.1.4.1.141.2.1.5.3 | TableartTable | not-accessible | current | This table provides sets of application response time reports. Each row of the table corresponds to a report. Existing reports are deleted by the probe at the … |
| 1.3.6.1.4.1.141.2.1.5.3.1 | RowartEntry | not-accessible | current | A conceptual row in the artTable. Each row corresponds to an application response time report for an individual {data source, application-protocol, client, ser… |
| 1.3.6.1.4.1.141.2.1.5.3.1.1 | ColumnartServerAddress | not-accessible | current | The address of the server. This is identified as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the… |
| 1.3.6.1.4.1.141.2.1.5.3.1.2 | ColumnartClientAddress | not-accessible | current | The address of the client. This is identified as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the… |
| 1.3.6.1.4.1.141.2.1.5.3.1.3 | ColumnartAvgRspTime | read-only | current | The average response time, in milliseconds, observed during the report interval. Specification of milliseconds as the time units does not require the probe to … |
| 1.3.6.1.4.1.141.2.1.5.3.1.4 | ColumnartMinRspTime | read-only | current | The minimum response time, in milliseconds, observed during the report interval. This object is the minimum value of the individual response times observed dur… |
| 1.3.6.1.4.1.141.2.1.5.3.1.5 | ColumnartMaxRspTime | read-only | current | The maximum response time, in milliseconds, observed during the report interval. This object is the maximum value of the individual response times observed dur… |
| 1.3.6.1.4.1.141.2.1.5.3.1.6 | ColumnartTotalResponses | read-only | current | The total number of client requests that have been successfully paired with a corresponding server response during the report interval. Requests that have been… |
| 1.3.6.1.4.1.141.2.1.5.3.1.7 | ColumnartRsps1 | read-only | current | The first of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required less t… |
| 1.3.6.1.4.1.141.2.1.5.3.1.8 | ColumnartRsps2 | read-only | current | The second of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at le… |
| 1.3.6.1.4.1.141.2.1.5.3.1.9 | ColumnartRsps3 | read-only | current | The third of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.3.1.10 | ColumnartRsps4 | read-only | current | The fourth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at le… |
| 1.3.6.1.4.1.141.2.1.5.3.1.11 | ColumnartRsps5 | read-only | current | The fifth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.3.1.12 | ColumnartRsps6 | read-only | current | The sixth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.3.1.13 | ColumnartRsps7 | read-only | current | The seventh of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at l… |
| 1.3.6.1.4.1.141.2.1.5.3.1.14 | ColumnartClientOctets | read-only | current | The total number of octets observed in client requests during the report interval. If the application-layer PDU has been fragmented into multiple packets, all … |
| 1.3.6.1.4.1.141.2.1.5.3.1.15 | ColumnartClientOverflowOctets | read-only | current | The number of times the associated artClientOctets counter has overflowed. |
| 1.3.6.1.4.1.141.2.1.5.3.1.16 | ColumnartClientHCOctets | read-only | current | The high-capacity version of artClientOctets. |
| 1.3.6.1.4.1.141.2.1.5.3.1.17 | ColumnartServerOctets | read-only | current | The total number of octets in server responses during the report interval. If the application-layer PDU has been fragmented into multiple packets, all octets i… |
| 1.3.6.1.4.1.141.2.1.5.3.1.18 | ColumnartServerOverflowOctets | read-only | current | The number of times the associated artServerOctets counter has overflowed. |
| 1.3.6.1.4.1.141.2.1.5.3.1.19 | ColumnartServerHCOctets | read-only | current | The high-capacity version of artServerOctets. |
| 1.3.6.1.4.1.141.2.1.5.3.1.20 | ColumnartRetries | read-only | current | This total number of application-layer client retries observed during the report interval. |
| 1.3.6.1.4.1.141.2.1.5.3.1.21 | ColumnartTimeouts | read-only | current | The number of times the probe has timed-out a client request while waiting for a server response during the report interval. Timeouts may occur due to server c… |
| 1.3.6.1.4.1.141.2.1.5.4 | NodeartConformance | |||
| 1.3.6.1.4.1.141.2.1.5.4.1 | NodeartMIBCompliances | |||
| 1.3.6.1.4.1.141.2.1.5.4.1.1 | ComplianceartMIBCompliance | current | Describes the requirements for conformance to the ART MIB. | |
| 1.3.6.1.4.1.141.2.1.5.4.2 | NodeartMIBGroups | |||
| 1.3.6.1.4.1.141.2.1.5.4.2.1 | GroupartGroup | current | This group adds application response time measurement to RMON-2. | |
| 1.3.6.1.4.1.141.2.1.5.5 | TableartSummaryTable | not-accessible | current | This table provides sets of application response time summary reports. Each row of the table corresponds to a report. Existing reports are deleted by the probe… |
| 1.3.6.1.4.1.141.2.1.5.5.1 | RowartSummaryEntry | not-accessible | current | A conceptual row in the artSummaryTable. Each row corresponds to an application response time report for an individual {data source, application-protocol, serv… |
| 1.3.6.1.4.1.141.2.1.5.5.1.1 | ColumnartSummaryServerAddress | not-accessible | current | The address of the server. This is identified as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the… |
| 1.3.6.1.4.1.141.2.1.5.5.1.2 | ColumnartSummaryClients | read-only | current | The number of clients of this server for which requests were successfully paired with server responses during the report interval. |
| 1.3.6.1.4.1.141.2.1.5.5.1.3 | ColumnartSummaryAvgRspTime | read-only | current | The average response time, in milliseconds, observed during the report interval. Specification of milliseconds as the time units does not require the probe to … |
| 1.3.6.1.4.1.141.2.1.5.5.1.4 | ColumnartSummaryMinRspTime | read-only | current | The minimum response time, in milliseconds, observed during the report interval. This object is the minimum value of the individual response times observed dur… |
| 1.3.6.1.4.1.141.2.1.5.5.1.5 | ColumnartSummaryMaxRspTime | read-only | current | The maximum response time, in milliseconds, observed during the report interval. This object is the maximum value of the individual response times observed dur… |
| 1.3.6.1.4.1.141.2.1.5.5.1.6 | ColumnartSummaryTotalResponses | read-only | current | The total number of client requests that have been successfully paired with a corresponding server response during the report interval. Requests that have been… |
| 1.3.6.1.4.1.141.2.1.5.5.1.7 | ColumnartSummaryRsps1 | read-only | current | The first of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required less t… |
| 1.3.6.1.4.1.141.2.1.5.5.1.8 | ColumnartSummaryRsps2 | read-only | current | The second of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at le… |
| 1.3.6.1.4.1.141.2.1.5.5.1.9 | ColumnartSummaryRsps3 | read-only | current | The third of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.5.1.10 | ColumnartSummaryRsps4 | read-only | current | The fourth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at le… |
| 1.3.6.1.4.1.141.2.1.5.5.1.11 | ColumnartSummaryRsps5 | read-only | current | The fifth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.5.1.12 | ColumnartSummaryRsps6 | read-only | current | The sixth of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at lea… |
| 1.3.6.1.4.1.141.2.1.5.5.1.13 | ColumnartSummaryRsps7 | read-only | current | The seventh of seven counters used to categorize the response times observed during the report interval. This object is a count of responses that required at l… |
| 1.3.6.1.4.1.141.2.1.5.5.1.14 | ColumnartSummaryClientOctets | read-only | current | The total number of octets observed in client requests during the report interval. If the application-layer PDU has been fragmented into multiple packets, all … |
| 1.3.6.1.4.1.141.2.1.5.5.1.15 | ColumnartSummaryClientOverflowOctets | read-only | current | The number of times the associated artClientOctets counter has overflowed. |
| 1.3.6.1.4.1.141.2.1.5.5.1.16 | ColumnartSummaryClientHCOctets | read-only | current | The high-capacity version of artSummaryClientOctets. |
| 1.3.6.1.4.1.141.2.1.5.5.1.17 | ColumnartSummaryServerOctets | read-only | current | The total number of octets in server responses during the report interval. If the application-layer PDU has been fragmented into multiple packets, all octets i… |
| 1.3.6.1.4.1.141.2.1.5.5.1.18 | ColumnartSummaryServerOverflowOctets | read-only | current | The number of times the associated artSummaryServerOctets counter has overflowed. |
| 1.3.6.1.4.1.141.2.1.5.5.1.19 | ColumnartSummaryServerHCOctets | read-only | current | The high-capacity version of artSummaryServerOctets. |
| 1.3.6.1.4.1.141.2.1.5.5.1.20 | ColumnartSummaryRetries | read-only | current | This total number of application-layer client retries observed during the report interval. |
| 1.3.6.1.4.1.141.2.1.5.5.1.21 | ColumnartSummaryTimeouts | read-only | current | The number of times the probe has timed-out a client request while waiting for a server response during the report interval. Timeouts may occur due to server c… |