ARTEL-MIB
247 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.139 | Nodeartel | |||
| 1.3.6.1.4.1.139.1 | Nodenode | |||
| 1.3.6.1.4.1.139.1.1 | ScalarnodeName | read-write | mandatory | This node's administratively assigned name. |
| 1.3.6.1.4.1.139.1.2 | ScalarnodeMacSlotMap | read-only | mandatory | Each Starbridge board is assigned a base physical address. The physical address for each port is then assigned as (baseAddress + portIndex - 1). The nodeMacSlo… |
| 1.3.6.1.4.1.139.1.3 | ScalarnodeColdBoot | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the node to reset which has the effect of resetting all the b… |
| 1.3.6.1.4.1.139.1.4 | ScalarnodeResetNvRam | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the node to reset the non-volatile RAM in each board in the n… |
| 1.3.6.1.4.1.139.1.5 | TablenodeIpSlotTable | not-accessible | mandatory | A table that contains the IP addresses of the boards in the node. |
| 1.3.6.1.4.1.139.1.5.1 | RownodeIpSlotEntry | not-accessible | mandatory | The IP address of one of the boards in the node. |
| 1.3.6.1.4.1.139.1.5.1.1 | ColumnnodeIpSlotIndex | read-only | mandatory | The slot number in the node. |
| 1.3.6.1.4.1.139.1.5.1.2 | ColumnnodeIpSlotAddr | read-write | mandatory | The IP address of the board in slot nodeIpSlotIndex. |
| 1.3.6.1.4.1.139.2 | Nodegalactica | |||
| 1.3.6.1.4.1.139.2.1 | Nodeboard | |||
| 1.3.6.1.4.1.139.2.1.1 | ScalarboardIpAddr | read-write | mandatory | The administratively assigned IP Address for this board. |
| 1.3.6.1.4.1.139.2.1.3 | ScalarboardReset | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the board to reset. |
| 1.3.6.1.4.1.139.2.1.4 | ScalarboardResetNvRam | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the non-volatile ram to be reset to their default values. |
| 1.3.6.1.4.1.139.2.1.5 | ScalarboardLedStatus | read-only | mandatory | The returns 16 bits encoded as an integer that represent the LEDs found on the front panel of the System Management board and on internal LED displays on the S… |
| 1.3.6.1.4.1.139.2.1.6 | ScalarboardSlotNum | read-only | mandatory | The Galactica Chassis slot that this board resides in. The slots are numbered 0 thru n with 0 being the bottom slot. |
| 1.3.6.1.4.1.139.2.1.7 | ScalarboardClass | read-only | mandatory | The type of board/device. |
| 1.3.6.1.4.1.139.2.1.8 | ScalarboardResetCounts | read-only | mandatory | The number of times the 68K processor on this board has reset since the last time the non-volatile ram has been reset to default values. |
| 1.3.6.1.4.1.139.2.1.9 | ScalarboardSnmpMibVersion | read-only | mandatory | The version of the Artel Proprietary MIB supported by this board. |
| 1.3.6.1.4.1.139.2.2 | Nodearcnet | |||
| 1.3.6.1.4.1.139.2.2.1 | ScalararcnetBoardsPresent | read-only | mandatory | A 17 bit bit-significant register returned as an integer. If the bit is set there is a board in that slot. The least significant bit represents slot 0. The mos… |
| 1.3.6.1.4.1.139.2.2.2 | ScalararcnetRxPkts | read-only | mandatory | The total number of packets received by this board over the internal Arcnet interface. |
| 1.3.6.1.4.1.139.2.2.3 | ScalararcnetTxPkts | read-only | mandatory | The total number of packets transmitted by this board over the internal Arcnet interface. |
| 1.3.6.1.4.1.139.2.2.4 | ScalararcnetNakCnts | read-only | mandatory | The number of Negative Acknowledgements received by this board over the internal Arcnet interface when attemting to transmit. |
| 1.3.6.1.4.1.139.2.2.5 | ScalararcnetMyReconfigCounts | read-only | mandatory | The number of times the internal Arcnet bus has been reconfigured by this board. |
| 1.3.6.1.4.1.139.2.2.6 | ScalararcnetReconfigCounts | read-only | mandatory | The total number of times the internal Arcnet bus has been reconfigured since powerup. |
| 1.3.6.1.4.1.139.2.2.7 | ScalararcnetTrashedRxMsgs | read-only | mandatory | The number of Arcnet receive messages that were discarded by this board. |
| 1.3.6.1.4.1.139.2.2.8 | ScalararcnetTrashedTxMsgs | read-only | mandatory | The number of Arcnet transmit messages that were discarded by this board. |
| 1.3.6.1.4.1.139.2.3 | Nodebackplane | |||
| 1.3.6.1.4.1.139.2.3.1 | ScalarbpStatsEnabled | read-write | mandatory | The administrative state of this boards connection to the Galactica 1 gigabit GBus. |
| 1.3.6.1.4.1.139.2.3.2 | ScalarbpStatsRxPkts | read-only | mandatory | Total number of packets received by this board from the Galactica 1 gigabit GBus. |
| 1.3.6.1.4.1.139.2.3.3 | ScalarbpStatsRxErrors | read-only | mandatory | Number of received packets that were received from the Galactica 1 gigabit GBus that contained errors. |
| 1.3.6.1.4.1.139.2.3.4 | ScalarbpStatsTxPkts | read-only | mandatory | Total number of packets transmitted by this board from the Galactica 1 gigabit GBus. |
| 1.3.6.1.4.1.139.2.3.5 | ScalarbpStatsTxErrors | read-only | mandatory | Number of packets which could not be transmitted because the receiver board was busy. |
| 1.3.6.1.4.1.139.2.3.6 | ScalarbpStatsOperState | read-only | mandatory | Operational state of this boards connection to the Galactica 1 gigabit GBus. |
| 1.3.6.1.4.1.139.2.3.7 | ScalarbpStatsInitialize | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the Backplane statistics to be cleared. |
| 1.3.6.1.4.1.139.2.3.8 | ScalarbpStatsTxQOverErrors | read-only | mandatory | A count of the number of overflows of the backplane transmit queue. |
| 1.3.6.1.4.1.139.2.3.9 | TablebpStatsRxBusyTable | not-accessible | mandatory | A table stored on each board (except System Managers) that counts the number of packets transmitted by this board across the backplane that had to be discarded… |
| 1.3.6.1.4.1.139.2.3.9.1 | RowbpStatsRxBusyTableEntry | not-accessible | mandatory | An entry for another board in the node that counts the number of backplane packets from this board that the other board was too busy to receive. |
| 1.3.6.1.4.1.139.2.3.9.1.1 | ColumnbpStatsRxBusyTableIndex | read-only | mandatory | The slot number of the receiving board. |
| 1.3.6.1.4.1.139.2.3.9.1.2 | ColumnbpStatsRxBusyTableErrors | read-only | mandatory | A count of the number of backplane packets transmitted by this board to the board in slot bpStatsRxBusyTableIndex that the other board was too busy to receive. |
| 1.3.6.1.4.1.139.2.4 | Nodebridge | |||
| 1.3.6.1.4.1.139.2.4.1 | TablerestrictedTable | not-accessible | mandatory | A table of physical addresses that are restricted from being bridged through this node. Filtering is done on both source and destination address. |
| 1.3.6.1.4.1.139.2.4.1.1 | RowrestrictedEntry | not-accessible | mandatory | Information needed to restrict a particular physical address. |
| 1.3.6.1.4.1.139.2.4.1.1.1 | ColumnrestrictedAddr | read-write | mandatory | The physical address to be restricted. |
| 1.3.6.1.4.1.139.2.4.1.1.2 | ColumnrestrictedStatus | read-write | mandatory | Indicates the state of the entry. Invalid items will be removed from the table. |
| 1.3.6.1.4.1.139.2.4.2 | ScalarbridgeAgeNow | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the forwarding database to be fully aged. |
| 1.3.6.1.4.1.139.2.4.3 | ScalarbridgeDot1dEnable | read-write | mandatory | Enables and disables the IEE 802.1d Spanning Tree Protocol for the board. |
| 1.3.6.1.4.1.139.2.4.4 | ScalarbridgeDot1dResetDefaults | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the Spanning Tree objects to be reset to the default values. |
| 1.3.6.1.4.1.139.2.4.6 | ScalarbridgeResetPktSwCount | read-only | mandatory | A count of the number of times the packet switching function has been reset. |
| 1.3.6.1.4.1.139.2.4.7 | ScalarbridgePktSwLastReset | read-only | mandatory | The value of sysUpTime when the packet swtiching function was last reset. |
| 1.3.6.1.4.1.139.2.4.8 | ScalarbridgeResetStatic | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the static table to be cleared. |
| 1.3.6.1.4.1.139.2.4.9 | ScalarbridgeRestrictedReset | read-write | mandatory | When queried, this object will always return the value 1. Setting this object to any value causes the restricted table to be cleared. |
| 1.3.6.1.4.1.139.2.4.11 | TablebridgeUdfTable | not-accessible | mandatory | A table maintaining user defined filtering information on each port on the board. |
| 1.3.6.1.4.1.139.2.4.11.1 | RowbridgeUdfEntry | not-accessible | mandatory | User defined filtering information maintained on a single port and filter. |
| 1.3.6.1.4.1.139.2.4.11.1.1 | ColumnbridgeUdfPortIndex | read-only | mandatory | The port number on the board. Same as ifIndex. |
| 1.3.6.1.4.1.139.2.4.11.1.2 | ColumnbridgeUdfFilterIndex | read-only | mandatory | The filter number for the port. |
| 1.3.6.1.4.1.139.2.4.11.1.3 | ColumnbridgeUdfState | read-write | mandatory | The state of this filter. There are four states: disabled, filter, forward and count. In the disabled state, this filter is ignored. In the filter state, a pac… |
| 1.3.6.1.4.1.139.2.4.11.1.4 | ColumnbridgeUdfComment | read-write | mandatory | A comment field to describe this filter. |
| 1.3.6.1.4.1.139.2.4.11.1.5 | ColumnbridgeUdfMatchCounts | read-only | mandatory | The number of packets that matched this filter when the bridgeUdfState was either filter, forward or count. |
| 1.3.6.1.4.1.139.2.4.11.1.6 | ColumnbridgeUdfInitMatchCount | read-write | mandatory | When read this object always returns 1. When set to any value it will clear the bridgeUdfMatchCounts object for this port and filter. |
| 1.3.6.1.4.1.139.2.4.11.1.7 | ColumnbridgeUdfAddressType | read-write | mandatory | Source indicates that the address portion of this filter is using the source MAC address. Destination indicates the address portion of this filter is using the… |
| 1.3.6.1.4.1.139.2.4.11.1.8 | ColumnbridgeUdfAddressValue | read-write | mandatory | The data value used for comparison on the MAC address in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.9 | ColumnbridgeUdfAddressMask | read-write | mandatory | The value used to mask off the data value used for comparison on the MAC address in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.10 | ColumnbridgeUdfAddressOperand | read-write | mandatory | The operand used in the comparison of the bridgeUdfAddressValue and the MAC address in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.11 | ColumnbridgeUdfTypeValue | read-write | mandatory | The data value used for comparison on the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.12 | ColumnbridgeUdfTypeMask | read-write | mandatory | The value used to mask off the data value used for comparison on the type field in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.13 | ColumnbridgeUdfTypeOperand | read-write | mandatory | The operand used in the comparison of the bridgeUdfTypeValue and the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.14 | ColumnbridgeUdfOffset1Offset | read-write | mandatory | The number of bytes from the start of the MAC header to the start of the data area in the packet to be used in the filter's comparison. This value must be divi… |
| 1.3.6.1.4.1.139.2.4.11.1.15 | ColumnbridgeUdfOffset1Value | read-write | mandatory | The data value used for comparison on the offset1 field as specified by bridgeUdfOffset1Offset in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.16 | ColumnbridgeUdfOffset1Mask | read-write | mandatory | The value used to mask off the data value used for comparison on the offset1 field in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.17 | ColumnbridgeUdfOffset1Operand | read-write | mandatory | The operand used in the comparison of the bridgeUdfOffset1Value and the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.18 | ColumnbridgeUdfOffset2Offset | read-write | mandatory | The number of bytes from the start of the MAC header to the start of the data area in the packet to be used in the filter's comparison. This value must be divi… |
| 1.3.6.1.4.1.139.2.4.11.1.19 | ColumnbridgeUdfOffset2Value | read-write | mandatory | The data value used for comparison on the offset1 field as specified by bridgeUdfOffset2Offset in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.20 | ColumnbridgeUdfOffset2Mask | read-write | mandatory | The value used to mask off the data value used for comparison on the offset2 field in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.21 | ColumnbridgeUdfOffset2Operand | read-write | mandatory | The operand used in the comparison of the bridgeUdfOffset2Value and the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.22 | ColumnbridgeUdfOffset3Offset | read-write | mandatory | The number of bytes from the start of the MAC header to the start of the data area in the packet to be used in the filter's comparison. This value must be divi… |
| 1.3.6.1.4.1.139.2.4.11.1.23 | ColumnbridgeUdfOffset3Value | read-write | mandatory | The data value used for comparison on the offset1 field as specified by bridgeUdfOffset3Offset in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.24 | ColumnbridgeUdfOffset3Mask | read-write | mandatory | The value used to mask off the data value used for comparison on the offset3 field in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.25 | ColumnbridgeUdfOffset3Operand | read-write | mandatory | The operand used in the comparison of the bridgeUdfOffset3Value and the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.26 | ColumnbridgeUdfOffset4Offset | read-write | mandatory | The number of bytes from the start of the MAC header to the start of the data area in the packet to be used in the filter's comparison. This value must be divi… |
| 1.3.6.1.4.1.139.2.4.11.1.27 | ColumnbridgeUdfOffset4Value | read-write | mandatory | The data value used for comparison on the offset1 field as specified by bridgeUdfOffset4Offset in the packet. |
| 1.3.6.1.4.1.139.2.4.11.1.28 | ColumnbridgeUdfOffset4Mask | read-write | mandatory | The value used to mask off the data value used for comparison on the offset4 field in the packet. Don't care bits are zero. |
| 1.3.6.1.4.1.139.2.4.11.1.29 | ColumnbridgeUdfOffset4Operand | read-write | mandatory | The operand used in the comparison of the bridgeUdfOffset4Value and the type field in the packet. |
| 1.3.6.1.4.1.139.2.4.12 | TablebridgeUdfInitCountTable | not-accessible | mandatory | A table used to clear all of a port's bridgeUdfMatchCounts. |
| 1.3.6.1.4.1.139.2.4.12.1 | RowbridgeUdfInitCountEntry | not-accessible | mandatory | A table entry used to clear all of a port's bridgeUdfMatchCounts. |
| 1.3.6.1.4.1.139.2.4.12.1.1 | ColumnbridgeUdfCountPortIndex | read-only | mandatory | The port number on the board. Same as ifIndex. |
| 1.3.6.1.4.1.139.2.4.12.1.2 | ColumnbridgeUdfCountInitMatchCount | read-write | mandatory | When read this object always returns 1. When set to any value it will clear all of the bridgeUdfMatchCounts objects for this port. |
| 1.3.6.1.4.1.139.2.4.13 | ScalarbridgePortGroupEnable | read-write | mandatory | Enables and disables all Port Group filtering for the node. |
| 1.3.6.1.4.1.139.2.4.14 | TablebridgePortGroupTable | not-accessible | mandatory | A table containing the port group information on each port and group in the node. |
| 1.3.6.1.4.1.139.2.4.14.1 | RowbridgePortGroupEntry | not-accessible | mandatory | Port group information maintained on a single port and group. |
| 1.3.6.1.4.1.139.2.4.14.1.1 | ColumnbridgePortGroupTablePortIndex | read-only | mandatory | The port number in the node. |
| 1.3.6.1.4.1.139.2.4.14.1.2 | ColumnbridgePortGroupTableGroupIndex | read-only | mandatory | The group number in the node. |
| 1.3.6.1.4.1.139.2.4.14.1.3 | ColumnbridgePortGroupTableEnable | read-write | mandatory | This object indicates the status of this entry. enable(1) - This port is currently contained in this group. disable(2) - This port is not currently contained i… |
| 1.3.6.1.4.1.139.2.4.15 | TablebridgePortGroupPortTable | not-accessible | mandatory | A table containing the port group information as readable strings on each port on the board. |
| 1.3.6.1.4.1.139.2.4.15.1 | RowbridgePortGroupPortEntry | not-accessible | mandatory | Port group information maintained on a single port. |
| 1.3.6.1.4.1.139.2.4.15.1.1 | ColumnbridgePortGroupPortIndex | read-only | mandatory | The port number on the board. Same as ifIndex. |
| 1.3.6.1.4.1.139.2.4.15.1.2 | ColumnbridgePortGroupPortDisplayString | read-only | mandatory | A readable string that contains all of the port groups that this port is a member of. |
| 1.3.6.1.4.1.139.2.4.16 | TablebridgePortGroupGroupTable | not-accessible | mandatory | A table maintaining the port group information for each group on the node. |
| 1.3.6.1.4.1.139.2.4.16.1 | RowbridgePortGroupGroupEntry | not-accessible | mandatory | Port group information maintained on a single port group. |
| 1.3.6.1.4.1.139.2.4.16.1.1 | ColumnbridgePortGroupGroupIndex | read-only | mandatory | The group number on the node. |
| 1.3.6.1.4.1.139.2.4.16.1.2 | ColumnbridgePortGroupGroupPortMap | read-write | mandatory | The set of ports which are members of this group. Packets can only be forwarded to ports in the same port group(s) as the port on which the packet was received… |
| 1.3.6.1.4.1.139.2.4.16.1.3 | ColumnbridgePortGroupGroupComment | read-only | mandatory | A readable string that contains all of the port groups that this port is a member of. |
| 1.3.6.1.4.1.139.2.4.17 | TablebridgeAddrFilterTable | not-accessible | mandatory | A table that contains information about MAC addresses for which the node has forwarding and/or filtering information. This information is used by the transpare… |
| 1.3.6.1.4.1.139.2.4.17.1 | RowbridgeAddrFilterEntry | not-accessible | mandatory | Address filtering information maintained on a block of 100 entries in the node's filtering database. |
| 1.3.6.1.4.1.139.2.4.17.1.1 | ColumnbridgeAddrFilterBlockIndex | read-only | mandatory | Block number for this entry. Each block holds information on 100 entry locations into the node's address filtering database. |
| 1.3.6.1.4.1.139.2.4.17.1.2 | ColumnbridgeAddrFilterBlockData | read-only | mandatory | There will be 100 address entries returned. Each address entry contains the following data: ENTRY NUMBER: 2 octets - The physical entry into the node's address… |
| 1.3.6.1.4.1.139.2.4.18 | Tablebridgedot1dTpFdbTable | not-accessible | mandatory | A table that contains information about MAC addresses for which the bridge has forwarding and/or filtering information. This information is used by the transpa… |
| 1.3.6.1.4.1.139.2.4.18.1 | Rowbridgedot1dTpFdbEntry | not-accessible | mandatory | Information about a specific MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.139.2.4.18.1.1 | Columnbridgedot1dTpFdbAddress | read-only | mandatory | A MAC address for which the bridge has some forwarding and/or filtering information. Same as dot1dTpFdbAddress. |
| 1.3.6.1.4.1.139.2.4.18.1.2 | Columnbridgedot1dTpFdbSlot | read-only | mandatory | If bridgeDot1dTpFdbStatus is 'learned' then the slot number of the board on which a frame having a source address equal to the value of the MAC address has bee… |
| 1.3.6.1.4.1.139.2.4.18.1.3 | Columnbridgedot1dTpFdbPort | read-only | mandatory | If bridgeDot1dTpFdbStatus is 'learned' then the port number of the port on which a frame having a source address equal to the value of the MAC address has been… |
| 1.3.6.1.4.1.139.2.4.18.1.4 | Columnbridgedot1dTpFdbStatus | read-only | mandatory | The type of entry can be one of the following: invalid(1) : This entry is not valid. learned(2) : The value of the PORT and SLOT was learned, and is being used… |
| 1.3.6.1.4.1.139.2.4.18.1.5 | Columnbridgedot1dTpFdbAge | read-only | mandatory | If the bridgedot1dTpFdbStatus is 'learned' then the value of the AGE flag is: invalid(1) : Not valid for this entry. notaged(2) : The MAC address has not been … |
| 1.3.6.1.4.1.139.2.5 | NodesystemManagement | |||
| 1.3.6.1.4.1.139.2.5.1 | NodesmConfiguration | |||
| 1.3.6.1.4.1.139.2.5.1.1 | ScalarsmCfgManufactureDate | read-only | mandatory | The manufacture date of this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.2 | ScalarsmCfgType | read-only | mandatory | The type of board. |
| 1.3.6.1.4.1.139.2.5.1.3 | ScalarsmCfgHardwareRev | read-only | mandatory | The hardware revision number of this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.4 | ScalarsmCfgSerialNumber | read-only | mandatory | The serial number of this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.5 | ScalarsmCfgMacAddr | read-only | mandatory | The physical address of this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.6 | ScalarsmCfgFlashMemSize | read-only | mandatory | Number of bytes of flash memory on this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.7 | ScalarsmCfg68kRamSize | read-only | mandatory | Management software RAM size on this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.8 | ScalarsmCfgBootRev | read-only | mandatory | Revision number and date of the boot software on this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.9 | ScalarsmCfg68kRev | read-only | mandatory | Revision number and date of the management software on this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.10 | ScalarsmCfgModulePartNumber | read-only | mandatory | The Artel part number for this System Management module. |
| 1.3.6.1.4.1.139.2.5.1.11 | ScalarsmCfgModuleSerialNumber | read-only | mandatory | The Artel serial number for this System Management module. |
| 1.3.6.1.4.1.139.2.5.1.12 | ScalarsmCfgStoreFlashRev | read-only | mandatory | The version number of the software loaded in the store flash memory bank on this System Management board. |
| 1.3.6.1.4.1.139.2.5.1.13 | ScalarsmCfgExecFlashRev | read-only | mandatory | The version number of the software loaded in the executable flash memory bank on this System Management board. |
| 1.3.6.1.4.1.139.2.5.2 | NodesmBackplane | |||
| 1.3.6.1.4.1.139.2.5.2.1 | ScalarsmBpType | read-only | mandatory | The type of Galactica 1 gigabit GBus on this node. |
| 1.3.6.1.4.1.139.2.5.2.2 | ScalarsmBpArbTimer | read-only | mandatory | The timeout period used to switch from asyncronous packets to syncronous packets. |
| 1.3.6.1.4.1.139.2.5.2.3 | ScalarsmBpMaxPktSize | read-only | mandatory | The maximum packet size transmitted over the node's Galactica 1 gigabit GBus. |
| 1.3.6.1.4.1.139.2.5.2.4 | ScalarsmBpAsyncSlotsEnb | read-only | mandatory | A bit string returned as an integer that indicates which boards are asynchronous. The least significant bit represents the board in slot 0. |
| 1.3.6.1.4.1.139.2.5.2.5 | ScalarsmBpSyncSlotsEnb | read-only | mandatory | A bit string returned as an integer that indicates which boards are synchronous. The least significant bit represents the board in slot 0. |
| 1.3.6.1.4.1.139.2.5.2.6 | ScalarsmBpUtilization | read-only | mandatory | The current percentage of Galactica 1 gigabit GBus utilization. |
| 1.3.6.1.4.1.139.2.5.2.7 | TablesmBpTable | not-accessible | mandatory | A table maintaining state information on each board in the node. |
| 1.3.6.1.4.1.139.2.5.2.7.1 | RowsmBpEntry | not-accessible | mandatory | Information maintained on a single board. |
| 1.3.6.1.4.1.139.2.5.2.7.1.1 | ColumnsmBpIndex | read-only | mandatory | The slot number of the board. |
| 1.3.6.1.4.1.139.2.5.2.7.1.2 | ColumnsmBpTableEnable | read-only | mandatory | The current operational state of the board as viewed by the System Management board. |
| 1.3.6.1.4.1.139.2.5.2.7.1.3 | ColumnsmBpTableJabber | read-only | mandatory | True indicates that the board transmitted a packet that was larger than the maximum packet size and was disabled from the Galactica 1 gigabit GBus by the Syste… |
| 1.3.6.1.4.1.139.2.5.2.7.1.4 | ColumnsmBpTableClearJabber | read-write | mandatory | When read this object always returns 1. When set to any value, the System Manager will clear the smBpTableJabber object allowing the board to be re-enabled ont… |
| 1.3.6.1.4.1.139.2.5.4 | NodesmPowerSupply | |||
| 1.3.6.1.4.1.139.2.5.4.1 | ScalarsmSupplyPresent | read-only | mandatory | A bit string returned as an integer that represents the presence of the power supplies. The lease significant bit represents power supply 1 which the leftmost … |
| 1.3.6.1.4.1.139.2.5.4.2 | ScalarsmSupplyType | read-only | mandatory | A bit string returned as an integer that indicates the type of power supply present. Two bits are assigned to each power supply with the 2 least significant bi… |
| 1.3.6.1.4.1.139.2.5.4.3 | ScalarsmSupplyAcOk | read-only | mandatory | A bit string returned as an integer that indicates the status of the AC power units. The least significant bit represents power supply 1. |
| 1.3.6.1.4.1.139.2.5.4.4 | ScalarsmSupplyDcOk | read-only | mandatory | A bit string returned as an integer that indicates the status of the DC power units. The least significant bit represents power supply 1. |
| 1.3.6.1.4.1.139.2.5.4.5 | TablesmSupplyTable | not-accessible | mandatory | A table of strings describing the status of the chassis power supplies. |
| 1.3.6.1.4.1.139.2.5.4.5.1 | RowsmSupplyTableEntry | not-accessible | mandatory | The status of one power supply in the chassis. |
| 1.3.6.1.4.1.139.2.5.4.5.1.1 | ColumnsmSupplyTableIndex | read-only | mandatory | The number of the power supply in the chassis, numbered from left to right. |
| 1.3.6.1.4.1.139.2.5.4.5.1.2 | ColumnsmSupplyTableStatus | read-only | mandatory | A text description of the status of the power supply. One of: 'NOT PRESENT', 'OFF', 'ON' or 'FAILURE'. |
| 1.3.6.1.4.1.139.2.5.5 | NodesmModem | |||
| 1.3.6.1.4.1.139.2.5.5.1 | ScalarsmModemType | read-only | mandatory | The modem type present on the node's System Management board. |
| 1.3.6.1.4.1.139.2.5.5.2 | ScalarsmModemCallBackEnable | read-write | mandatory | Enables and disables the call-back feature of the modem. If enabled the modem will answer a call, then hang up and dial the number in smModemCallBackNumber. If… |
| 1.3.6.1.4.1.139.2.5.5.3 | ScalarsmModemCallBackNumber | read-write | mandatory | A Hayes style dial string that the internal modem uses if call-back is enabled. The string should not contain the 'ATD' characters, but a leading 'P' may be us… |
| 1.3.6.1.4.1.139.2.6 | Nodestarbridge | |||
| 1.3.6.1.4.1.139.2.6.1 | NodesbConfiguration | |||
| 1.3.6.1.4.1.139.2.6.1.1 | ScalarsbCfgManufactureDate | read-only | mandatory | The manufacture date of this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.2 | ScalarsbCfgType | read-only | mandatory | The type of board |
| 1.3.6.1.4.1.139.2.6.1.3 | ScalarsbCfgHardwareRev | read-only | mandatory | The hardware revision number of this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.4 | ScalarsbCfgSerialNumber | read-only | mandatory | The serial number of this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.5 | ScalarsbCfgNumberIfBoards | read-only | mandatory | The number of interface cards on this module. |
| 1.3.6.1.4.1.139.2.6.1.6 | ScalarsbCfgIfBd1Type | read-only | mandatory | The interface type of interface card 1. |
| 1.3.6.1.4.1.139.2.6.1.7 | ScalarsbCfgIfBd1Rev | read-only | mandatory | The hardware revision number of interface card 1. |
| 1.3.6.1.4.1.139.2.6.1.8 | ScalarsbCfgIfBd1SerialNum | read-only | mandatory | The serial number of interface card 1. |
| 1.3.6.1.4.1.139.2.6.1.9 | ScalarsbCfgIfBd1NumPorts | read-only | mandatory | The number of ports contained on interface card 1. |
| 1.3.6.1.4.1.139.2.6.1.10 | ScalarsbCfgIfBd2Type | read-only | mandatory | The interface type of interface card 2. |
| 1.3.6.1.4.1.139.2.6.1.11 | ScalarsbCfgIfBd2Rev | read-only | mandatory | The hardware revision number of interface card 2. |
| 1.3.6.1.4.1.139.2.6.1.12 | ScalarsbCfgIfBd2SerialNum | read-only | mandatory | The serial number of interface card 2. |
| 1.3.6.1.4.1.139.2.6.1.13 | ScalarsbCfgIfBd2NumPorts | read-only | mandatory | The number of ports contained on interface card 2. |
| 1.3.6.1.4.1.139.2.6.1.14 | ScalarsbCfgFlashMemorySize | read-only | mandatory | Number of bytes of flash memory on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.15 | ScalarsbCfg68kRamSize | read-only | mandatory | Management software RAM size on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.16 | ScalarsbCfg960RamSize | read-only | mandatory | Packet switch software RAM size on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.17 | ScalarsbCfgSonicRamSize | read-only | mandatory | Size of the RAM used by the Ethernet Controllers (Sonic) for packet processing.. |
| 1.3.6.1.4.1.139.2.6.1.18 | ScalarsbCfgHasherCacheTagSize | read-only | mandatory | The number of bytes in the hasher cache on this Starbridge board. Each address used 6 bytes. |
| 1.3.6.1.4.1.139.2.6.1.19 | ScalarsbCfgDualPortRamSize | read-only | mandatory | The size of the dual port RAM used by the Galactica 1 gigabit GBus on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.20 | ScalarsbCfgBootRev | read-only | mandatory | Revision number and date of the boot software on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.21 | ScalarsbCfg68kRev | read-only | mandatory | Revision number and date of the management boot ROM software on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.22 | ScalarsbCfg960Rev | read-only | mandatory | Revision number and date of the packet switch software on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.23 | ScalarsbCfgModulePartNumber | read-only | mandatory | The Artel part number for this Starbridge module. |
| 1.3.6.1.4.1.139.2.6.1.24 | ScalarsbCfgModuleSerialNumber | read-only | mandatory | The Artel serial number for this Starbridge module. |
| 1.3.6.1.4.1.139.2.6.1.25 | ScalarsbCfgStoreFlashRev | read-only | mandatory | The version number of the software loaded in the store flash memory bank on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.1.26 | ScalarsbCfgExecFlashRev | read-only | mandatory | The version number of the software loaded in the executable flash memory bank on this Starbridge board. |
| 1.3.6.1.4.1.139.2.6.3 | NodesbPort | |||
| 1.3.6.1.4.1.139.2.6.3.1 | TablesbPortTable | not-accessible | mandatory | Statistics maintained for the ports on a Starbridge board. |
| 1.3.6.1.4.1.139.2.6.3.1.1 | RowsbPortEntry | not-accessible | mandatory | The statics for a particular port on the Starbridge board. |
| 1.3.6.1.4.1.139.2.6.3.1.1.1 | ColumnsbPortIndex | read-only | mandatory | The port number associated with this port. Always the same as ifIndex. |
| 1.3.6.1.4.1.139.2.6.3.1.1.2 | ColumnsbPortRxMulticastFrames | read-only | mandatory | The number of multicast frames received on this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.3 | ColumnsbPortRxBroadcastFrames | read-only | mandatory | The number of broadcast frames received on this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.5 | ColumnsbPortRxRuntErrors | read-only | mandatory | The number of packets received that were smaller than the minimum size packet defined for this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.6 | ColumnsbPortRxBytes | read-only | mandatory | The total number of bytes received on this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.7 | ColumnsbPortTxBytes | read-only | mandatory | The total number of bytes transmitted on this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.8 | ColumnsbPortRxBroadcastStatus | read-write | mandatory | Administratively enables and disables the receipt of broadcasts on this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.9 | ColumnsbPortName | read-write | mandatory | Administratively assigned name for this port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.10 | ColumnsbPortUtilization | read-only | mandatory | Port usage over the past ten seconds, expressed as a percentage. |
| 1.3.6.1.4.1.139.2.6.3.1.1.11 | ColumnsbPortFramesPerSecond | read-only | mandatory | The number of data frames per second seen by the port. |
| 1.3.6.1.4.1.139.2.6.3.1.1.12 | ColumnsbPortErrorRate | read-only | mandatory | Port errors over the past ten seconds, expressed as a percentage. |
| 1.3.6.1.4.1.139.2.6.3.1.1.13 | ColumnsbPortInitStats | read-write | mandatory | This object always returns 1. Setting this object to any value causes the port statistics to be cleared. |
| 1.3.6.1.4.1.139.2.6.3.2 | TablesbPortUnidirectTable | not-accessible | mandatory | Table that supports the Artel uni-direct option. |
| 1.3.6.1.4.1.139.2.6.3.2.1 | RowsbPortUnidirectEntry | not-accessible | mandatory | The information needed for one uni-direct connection. |
| 1.3.6.1.4.1.139.2.6.3.2.1.1 | ColumnsbPortUnidirectIndex | read-only | mandatory | The index number assigned to this uni-direct channel. A unidirect channel consists of 2 ports. Channel 1 consists of port 1 and port 2 Channel 2 consists of po… |
| 1.3.6.1.4.1.139.2.6.3.2.1.2 | ColumnsbPortUnidirectEnable | read-write | mandatory | Administratively enables and disables uni-direct. |
| 1.3.6.1.4.1.139.2.7 | Nodefddi | |||
| 1.3.6.1.4.1.139.2.7.1 | NodefddiConfiguration | |||
| 1.3.6.1.4.1.139.2.7.1.1 | ScalarfddiCfgManufactureDate | read-only | mandatory | The manufacture date of this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.2 | ScalarfddiCfgType | read-only | mandatory | The type of board. |
| 1.3.6.1.4.1.139.2.7.1.3 | ScalarfddiCfgHardwareRev | read-only | mandatory | The hardware revision number of this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.4 | ScalarfddiCfgSerialNumber | read-only | mandatory | The serial number of this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.5 | ScalarfddiCfgNumberFddiPorts | read-only | mandatory | The number of ports on this module. |
| 1.3.6.1.4.1.139.2.7.1.6 | ScalarfddiCfgPPFType | read-only | mandatory | A string describing the type of the FDDI chip set module. |
| 1.3.6.1.4.1.139.2.7.1.7 | ScalarfddiCfgPPFRev | read-only | mandatory | The hardware revision and date of the FDDI chip set module. |
| 1.3.6.1.4.1.139.2.7.1.8 | ScalarfddiCfgPPFSerialNumber | read-only | mandatory | The serial number of the FDDI chip set module. |
| 1.3.6.1.4.1.139.2.7.1.9 | ScalarfddiCfgMediaType | read-only | mandatory | A string describing the media type of the FDDI board. For example Multi-mode fiber or Twisted Pair. |
| 1.3.6.1.4.1.139.2.7.1.10 | ScalarfddiCfgFlashMemorySize | read-only | mandatory | Number of bytes of flash memory on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.11 | ScalarfddiCfg68kRamSize | read-only | mandatory | Management software RAM size on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.12 | ScalarfddiCfg960RamSize | read-only | mandatory | Packet switch software RAM size on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.13 | ScalarfddiCfgSonicRamSize | read-only | mandatory | Size of the RAM used by the Ethernet Controllers (Sonic) for packet processing.. |
| 1.3.6.1.4.1.139.2.7.1.14 | ScalarfddiCfgHasherCacheTagSize | read-only | mandatory | The number of bytes in the hasher cache on this FDDI board. Each address used 6 bytes. |
| 1.3.6.1.4.1.139.2.7.1.15 | ScalarfddiCfgDualPortRamSize | read-only | mandatory | The size of the dual port RAM used by the Galactica 1 gigabit GBus on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.16 | ScalarfddiCfgBootRev | read-only | mandatory | Revision number and date of the boot software on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.17 | ScalarfddiCfg68kRev | read-only | mandatory | Revision number and date of the management boot ROM software on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.18 | ScalarfddiCfg960Rev | read-only | mandatory | Revision number and date of the packet switch software on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.19 | ScalarfddiCfgPPFSoftwareRev | read-only | mandatory | Revision number and date of the FDDI chip set module. |
| 1.3.6.1.4.1.139.2.7.1.20 | ScalarfddiCfgModulePartNumber | read-only | mandatory | The Artel part number for this FDDI module. |
| 1.3.6.1.4.1.139.2.7.1.21 | ScalarfddiCfgModuleSerialNumber | read-only | mandatory | The Artel serial number for this FDDI module. |
| 1.3.6.1.4.1.139.2.7.1.22 | ScalarfddiCfgStoreFlashRev | read-only | mandatory | The version number of the software loaded in the store flash memory bank on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.1.23 | ScalarfddiCfgExecFlashRev | read-only | mandatory | The version number of the software loaded in the executable flash memory bank on this FDDI board. |
| 1.3.6.1.4.1.139.2.7.2 | NodefddiIpFragmentation | |||
| 1.3.6.1.4.1.139.2.7.2.1 | ScalarfddiIpFragEnabled | read-write | mandatory | Enables and disables IP fragmentation for the FDDI board. |
| 1.3.6.1.4.1.139.2.7.3 | NodefddiPort | |||
| 1.3.6.1.4.1.139.2.7.3.1 | TablefddiPortTable | not-accessible | mandatory | Statistics maintained for the ports on a FDDI board. |
| 1.3.6.1.4.1.139.2.7.3.1.1 | RowfddiPortEntry | not-accessible | mandatory | The statics for a particular port on the FDDI board. |
| 1.3.6.1.4.1.139.2.7.3.1.1.1 | ColumnfddiPortIndex | read-only | mandatory | The port number associated with this port. Always the same as ifIndex. |
| 1.3.6.1.4.1.139.2.7.3.1.1.2 | ColumnfddiPortRxMcastEnabled | read-only | mandatory | Enables and disables the reception of multicast frames on this port. |
| 1.3.6.1.4.1.139.2.7.3.1.1.3 | ColumnfddiPortNotCopiedOffRingErrs | read-only | mandatory | Equivalent to the ANSI FDDI attribute fddiMACNotCopied-Ct. The count of frames that should have been copied off the ring but were not. It is not required that … |
| 1.3.6.1.4.1.139.2.7.3.1.1.4 | ColumnfddiPortRingOpCounts | read-only | mandatory | Equivalent to the ANSI FDDI attribute fddiMACRingOp-Ct. The count of the number of times the ring has entered the 'Ring Operational' state from the 'Ring Not O… |
| 1.3.6.1.4.1.139.2.7.3.1.1.5 | ColumnfddiPortFrameCheckErrs | read-only | mandatory | The count of frames copied off the ring which had a bad FCS (Frame Check Sequence). |
| 1.3.6.1.4.1.139.64 | NodeartelTrap | |||
| 1.3.6.1.4.1.139.64.1 | TableartelTrapAddrTable | not-accessible | mandatory | A table of management systems ready to accept traps generated by this node. |
| 1.3.6.1.4.1.139.64.1.1 | RowartelTrapAddrEntry | not-accessible | mandatory | Information needed to deliver traps to a particular management station. |
| 1.3.6.1.4.1.139.64.1.1.1 | ColumnartelTrapAddrIpDest | read-write | mandatory | The IP address of the management agent receiving traps. |
| 1.3.6.1.4.1.139.64.1.1.2 | ColumnartelTrapAddrXPortIndex | read-only | mandatory | This is the UDP address defined as an OCTET STRING of 2 bytes for the purpose of using it as an instance whoses sub-id lengths cannot exceed one byte in length. |
| 1.3.6.1.4.1.139.64.1.1.3 | ColumnartelTrapAddrUdpDest | read-write | mandatory | The UDP port number used by the management station to receive traps. |
| 1.3.6.1.4.1.139.64.1.1.4 | ColumnartelTrapAddrCommunity | read-write | mandatory | The community name expected by the management station receiving traps. |
| 1.3.6.1.4.1.139.64.1.1.5 | ColumnartelTrapAddrStatus | read-write | mandatory | Permanent entries will be kept in non-volatile ram until the user specifically invalidates the entry. Temporary entries will be timed out after a minimum 10 mi… |
| 1.3.6.1.4.1.139.64.2 | ScalarartelTrapReportString | read-only | mandatory | When read this will always return a NULL string. It will be returned in varBindList of Artel proprietary traps to provide the user with any additional informat… |