ARTEM-COMPOINT-FILTER-MIB
21 objects
Funkwerk Enterprise Communications MIB file that provides additional attributes not covered by standard MIBs for for layer-2 protocol and MAC address-based filtering functionality in artem products.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4280 | Identityartem | Funkwerk Enterprise Communications MIB file that provides additional attributes not covered by standard MIBs for for layer-2 protocol and MAC address-based fil… | ||
| 1.3.6.1.4.1.4280.7 | IdentityartemFilter | current | Definitions and attributes for layer-2 protocol and MAC address-based filtering. | |
| 1.3.6.1.4.1.4280.7.1 | ScalarartemFilterArpTranslation | read-write | current | This attribute reflects the enable state of special ARP processing for access point functionality. If ARP processing is enabled, all ARP packets from associate… |
| 1.3.6.1.4.1.4280.7.2 | ScalarartemFilterDefaultProcessing | read-write | current | This attribute defines the default processing rule for all the protocols which have no specific actions defined. |
| 1.3.6.1.4.1.4280.7.3 | TableartemFilterProtocolTable | not-accessible | current | Table of protocol type based filtering rules. |
| 1.3.6.1.4.1.4280.7.3.1 | RowartemFilterProtocolEntry | not-accessible | current | An entry in artemFilterProtocolTable. |
| 1.3.6.1.4.1.4280.7.3.1.1 | ColumnartemFilterProtocolRowStatus | read-create | current | Auxiliary variable for creation of new object instances and/or the deletion of existing object instances. |
| 1.3.6.1.4.1.4280.7.3.1.2 | ColumnartemFilterProtocolType | not-accessible | current | This attribute holds the ethernet protocol type this rule matches. Protocol type examples: 0x0800 IP 0x0806 ARP 0x0bad Banyan VINES IP |
| 1.3.6.1.4.1.4280.7.3.1.3 | ColumnartemFilterProtocolProcessing | read-create | current | This rule defines what to do with frames that match the rule in the current table row. forward(1) - All frames are forwarded (no filtering takes place). discar… |
| 1.3.6.1.4.1.4280.7.4 | TableartemFilterMACTable | not-accessible | current | Table of MAC address based filtering rules. |
| 1.3.6.1.4.1.4280.7.4.1 | RowartemFilterMACEntry | not-accessible | current | An entry in artemFilterMACTable. |
| 1.3.6.1.4.1.4280.7.4.1.1 | ColumnartemFilterMACIndex | not-accessible | current | The auxiliary variable used to identify instances of the columnar objects in the artemFilterMACTable. |
| 1.3.6.1.4.1.4280.7.4.1.2 | ColumnartemFilterMACRowStatus | read-create | current | Auxiliary variable for creation of new object instances and/or the deletion of existing object instances. |
| 1.3.6.1.4.1.4280.7.4.1.3 | ColumnartemFilterMACState | read-create | current | This attribute defines the state of the filtering rule in the corresponding table row. disabled(0) - This rule is inactive. enabled(1) - This rule is active an… |
| 1.3.6.1.4.1.4280.7.4.1.4 | ColumnartemFilterMACSourceAddress | read-create | current | This attribute defines the source MAC address the filtering rule checks for. The following MAC address values have special meaning: 0xff0000000000 - matches pa… |
| 1.3.6.1.4.1.4280.7.4.1.5 | ColumnartemFilterMACDestAddress | read-create | current | This attribute defines the destination MAC address the filtering rule checks for. The following MAC address values have special meaning: 0x010000000000 - match… |
| 1.3.6.1.4.1.4280.7.5 | TableartemFilterMACDestIfTable | not-accessible | current | This table contains the destination interfaces for each rule in the artemFilterMACTable. |
| 1.3.6.1.4.1.4280.7.5.1 | RowartemFilterMACDestIfEntry | not-accessible | current | An entry in artemFilterMACDestPortsTable. |
| 1.3.6.1.4.1.4280.7.5.1.1 | ColumnartemFilterMACDestIfRowStatus | read-create | current | Auxiliary variable for creation of new object instances and/or the deletion of existing object instances. |
| 1.3.6.1.4.1.4280.7.7 | GroupartemFilterGroup | current | parameters not covered in standard 802.11 MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ArtemFilterProcessing | INTEGER { forward(1), discard(2), filterMAC(3), arpProcess(4) } artemFilter OBJECT-IDENTITY STATUS current DESCRIPTION "Definitions and attributes for layer-2 protocol and MAC address-based filtering." ::= { artem 7 } | current | This type represents the available method for artem filter processing. forward(1) - All frames are forwarded (no filtering takes place). discard(2) - All frames are discarded and none are forwarded. filterMAC(3) - Frame… |