ARTEM-COMPOINT-WLAN-MIB
94 objects
Funkwerk Enterprise Communications MIB file that provides additional attributes not covered by standard MIBs for WLAN functionality in artem products.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4280 | Identityartem | Funkwerk Enterprise Communications MIB file that provides additional attributes not covered by standard MIBs for WLAN functionality in artem products. | ||
| 1.3.6.1.4.1.4280.5 | IdentityartemWLAN | current | Definitions and attributes that apply to a radio module. The radio module may host one or more interfaces (AP service sets or bridge links). | |
| 1.3.6.1.4.1.4280.5.1 | NodeartemBridge | |||
| 1.3.6.1.4.1.4280.5.1.1 | ScalarartemBridgeConfigScanTimeout | read-write | current | This attribute defines the maximum time a bridge auto-configuration scan may take. After this timeout has expired, any auto-configuration scan will be aborted,… |
| 1.3.6.1.4.1.4280.5.1.2 | ScalarartemBridgeConfigSetupTimeout | read-write | current | This attribute defines the maximum time a bridge auto-configuration setup may take. After this timeout has expired, any auto-configuration setup will be aborte… |
| 1.3.6.1.4.1.4280.5.1.3 | TableartemBridgeLinksTable | not-accessible | current | Attributes for artem bridge links. |
| 1.3.6.1.4.1.4280.5.1.3.1 | RowartemBridgeLinksEntry | not-accessible | current | An entry in artemBridgeLinksTable. |
| 1.3.6.1.4.1.4280.5.1.3.1.1 | ColumnartemBridgeLinkIndex | not-accessible | current | This is the unique index number for a bridge link of the given radio. |
| 1.3.6.1.4.1.4280.5.1.3.1.2 | ColumnartemBridgeLinkRowStatus | read-create | current | Auxiliary variable for creation of new object instances and/or the deletion of existing object instances. |
| 1.3.6.1.4.1.4280.5.1.3.1.3 | ColumnartemBridgeLinkIfIndex | read-only | current | ifIndex that is associated to the combination of artemRadioIndex and artemBridgeLinkIndex. |
| 1.3.6.1.4.1.4280.5.1.3.1.4 | ColumnartemBridgeLinkAdminStatus | read-create | current | This attribute defines if the associated bridge link is currently active. |
| 1.3.6.1.4.1.4280.5.1.3.1.5 | ColumnartemBridgeLinkAliasName | read-create | current | This attribute can be used to set a textual alias name for this bridge link. Default is 'wl?_br?', where first '?' is radio number and second '?' is link numbe… |
| 1.3.6.1.4.1.4280.5.1.3.1.6 | ColumnartemBridgeLinkCurrentSpeed | read-only | current | This attribute returns the current transmission speed for this link, or 0 if no connection can be established. |
| 1.3.6.1.4.1.4280.5.1.3.1.7 | ColumnartemBridgeLinkPartnerRadioMacAddress | read-create | current | This attribute contains the MAC address of the remote radio module. It can be set directly, or via the auto-configuration mechanism. |
| 1.3.6.1.4.1.4280.5.1.3.1.8 | ColumnartemBridgeLinkOperStatus | read-only | current | This attribute shows if the bridge link connection is currently operative. |
| 1.3.6.1.4.1.4280.5.1.4 | TableartemBridgePrivacyTable | not-accessible | current | Table of privacy settings, with special privacy modes for bridge links. |
| 1.3.6.1.4.1.4280.5.1.4.1 | RowartemBridgePrivacyEntry | not-accessible | current | An entry in artemBridgePrivacyTable. |
| 1.3.6.1.4.1.4280.5.1.4.1.1 | ColumnartemBridgePrivacyMode | read-write | current | This attribute selects privacy mode to use for all bridge links on this radio. Privacy is immediately enabled anything different from 'none' is selected and an… |
| 1.3.6.1.4.1.4280.5.1.4.1.2 | ColumnartemBridgePrivacyAutoKey | read-write | current | Writing this attribute triggers automatic bridge privacy setup. Depending on artemBridgePrivacyMode, a pseudo-random WEP key or passphrase is generated, and pr… |
| 1.3.6.1.4.1.4280.5.1.5 | TableartemBridgeAutoConfigTable | not-accessible | current | Attributes for artem bridge link auto-configuration. |
| 1.3.6.1.4.1.4280.5.1.5.1 | RowartemBridgeAutoConfigEntry | not-accessible | current | An entry in artemBridgeAutoConfigTable. |
| 1.3.6.1.4.1.4280.5.1.5.1.1 | ColumnartemBridgeLinkLockState | read-write | current | This attribute defines if the bridge is locked. Lock state is common for all bridge links using the same radio. If the bridge is locked, it cannot be discovere… |
| 1.3.6.1.4.1.4280.5.1.5.1.2 | ColumnartemBridgeLinkConfigScanState | read-write | current | This attribute defines the current auto-configuration state. idle(0) - In this state, writing any value starts an auto-configuration scan for bridge link peers… |
| 1.3.6.1.4.1.4280.5.1.6 | TableartemBridgePeersTable | not-accessible | current | This table contains the results of bridge link auto-configuration scans. Each line represents a possible link partner. |
| 1.3.6.1.4.1.4280.5.1.6.1 | RowartemBridgePeersEntry | not-accessible | current | An entry in artemBridgePeersTable. |
| 1.3.6.1.4.1.4280.5.1.6.1.1 | ColumnartemBridgePeerIndex | not-accessible | current | The auxiliary variable used to identify instances of the columnar objects in the artemBridgePeersTable. |
| 1.3.6.1.4.1.4280.5.1.6.1.2 | ColumnartemBridgePeerLinkAliasName | read-only | current | This attribute shows the user-defined alias name for the peer's bridge link. |
| 1.3.6.1.4.1.4280.5.1.6.1.3 | ColumnartemBridgePeerCompointName | read-only | current | This attribute displays the given node name of the peer ComPoint. |
| 1.3.6.1.4.1.4280.5.1.6.1.4 | ColumnartemBridgePeerRSSI | read-only | current | This attribute shows the receive signal strength for the signal received from the peer in dBm. |
| 1.3.6.1.4.1.4280.5.1.6.1.5 | ColumnartemBridgePeerLinkAdminStatus | read-only | current | This attribute shows is the peer's bridge link is currently enabled. |
| 1.3.6.1.4.1.4280.5.1.6.1.6 | ColumnartemBridgePeerLockState | read-only | current | This attribute defines if the peer's bridge is locked. Lock state is common for all bridge links using the same radio. If the bridge is locked, it cannot be di… |
| 1.3.6.1.4.1.4280.5.1.6.1.7 | ColumnartemBridgePeerCompointMacAddress | read-only | current | This attribute displays the MAC address of the peer ComPoint. This is not the WLAN radio's MAC address, but rather the MAC address of the first ethernet port. |
| 1.3.6.1.4.1.4280.5.1.6.1.8 | ColumnartemBridgePeerRadioMacAddress | read-only | current | This attribute displays the peer's WLAN radio's MAC address. |
| 1.3.6.1.4.1.4280.5.1.6.1.9 | ColumnartemBridgePeerConfigSetupState | read-write | current | This attribute defines the current auto-configuration setup state of the bridge link. idle(0) - No auto-configuration is currently in progress. In this state, … |
| 1.3.6.1.4.1.4280.5.1.6.1.10 | ColumnartemBridgePeerConfigSetupResult | read-only | current | This attribute holds the result after a bridge link auto-config setup. It is reset whenever a new auto-config setup is triggered. |
| 1.3.6.1.4.1.4280.5.1.7 | TableartemLinkTestTable | not-accessible | current | This table contains the link test results for every bridge link. Reading the artemLinkTestSignalRemote attribute triggers transmission of a new link request fr… |
| 1.3.6.1.4.1.4280.5.1.7.1 | RowartemLinkTestEntry | not-accessible | current | An entry in artemLinkTestEntry. |
| 1.3.6.1.4.1.4280.5.1.7.1.1 | ColumnartemLinkTestSignalLocal | read-only | current | This attribute shows the received signal strength in dBm. |
| 1.3.6.1.4.1.4280.5.1.7.1.2 | ColumnartemLinkTestSignalRemote | read-only | current | This attribute shows the received signal in dBm, as measured by remote bridge link partner. Reading this attribute triggers transmission of a new link request … |
| 1.3.6.1.4.1.4280.5.1.7.1.3 | ColumnartemLinkTestNoiseLocal | read-only | current | This attribute shows the measured noise level in dBm. |
| 1.3.6.1.4.1.4280.5.1.7.1.4 | ColumnartemLinkTestNoiseRemote | read-only | current | This attribute shows the noise level in dBm, as measured by remote bridge link partner. |
| 1.3.6.1.4.1.4280.5.1.7.1.5 | ColumnartemLinkTestSNRLocal | read-only | current | This attribute shows the calculated Signal to Noise ratio in dB. |
| 1.3.6.1.4.1.4280.5.1.7.1.6 | ColumnartemLinkTestSNRRemote | read-only | current | This attribute shows the calculated Signal to Noise ratio in dB, as measured by remote bridge link partner. |
| 1.3.6.1.4.1.4280.5.1.7.1.7 | ColumnartemLinkTestFramesTransmitted | read-only | current | This attribute shows the number of link test frames transmitted. |
| 1.3.6.1.4.1.4280.5.1.7.1.8 | ColumnartemLinkTestFramesReceived | read-only | current | This attribute shows the number of link test frames successfully received. |
| 1.3.6.1.4.1.4280.5.1.7.1.9 | ColumnartemLinkTestFramesLost | read-only | current | This attribute shows the number of link test frames for which no reply has been received and therefore are considered lost. |
| 1.3.6.1.4.1.4280.5.1.7.1.10 | ColumnartemLinkTestRxFrames54 | read-only | current | This attribute shows the number of link test frames that were received at 54 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.11 | ColumnartemLinkTestRxFrames48 | read-only | current | This attribute shows the number of link test frames that were received at 48 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.12 | ColumnartemLinkTestRxFrames36 | read-only | current | This attribute shows the number of link test frames that were received at 36 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.13 | ColumnartemLinkTestRxFrames24 | read-only | current | This attribute shows the number of link test frames that were received at 24 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.14 | ColumnartemLinkTestRxFrames18 | read-only | current | This attribute shows the number of link test frames that were received at 18 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.15 | ColumnartemLinkTestRxFrames12 | read-only | current | This attribute shows the number of link test frames that were received at 12 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.16 | ColumnartemLinkTestRxFrames11 | read-only | current | This attribute shows the number of link test frames that were received at 11 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.17 | ColumnartemLinkTestRxFrames9 | read-only | current | This attribute shows the number of link test frames that were received at 9 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.18 | ColumnartemLinkTestRxFrames6 | read-only | current | This attribute shows the number of link test frames that were received at 6 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.19 | ColumnartemLinkTestRxFrames5 | read-only | current | This attribute shows the number of link test frames that were received at 5.5 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.20 | ColumnartemLinkTestRxFrames2 | read-only | current | This attribute shows the number of link test frames that were received at 2 Mbps. |
| 1.3.6.1.4.1.4280.5.1.7.1.21 | ColumnartemLinkTestRxFrames1 | read-only | current | This attribute shows the number of link test frames that were received at 1 Mbps. |
| 1.3.6.1.4.1.4280.5.1.8 | NodeartemBridgeNotification | |||
| 1.3.6.1.4.1.4280.5.1.8.1 | NotificationartemBridgeLinkOperState | current | This notification is triggered whenever the connection state of the bridge link changes, i.e. link connection is lost, or link connection is restored. | |
| 1.3.6.1.4.1.4280.5.1.8.2 | NotificationartemBridgeLinkConfigScan | current | This notification is thrown whenever the bridge link auto-configuration scanning state changes. | |
| 1.3.6.1.4.1.4280.5.1.8.3 | NotificationartemBridgePeerConfigSetup | current | This notification is thrown whenever the bridge link auto-configuration setup state changes. | |
| 1.3.6.1.4.1.4280.5.1.8.4 | NotificationartemBridgeLinkLock | current | This notification is triggered whenever the lock state of the bridge link changes. | |
| 1.3.6.1.4.1.4280.5.1.9 | GroupartemBridgeGroup | current | artem bridge-specific attributes. | |
| 1.3.6.1.4.1.4280.5.1.10 | GroupartemBridgePrivacyGroup | current | artem bridge-specific privacy attributes. | |
| 1.3.6.1.4.1.4280.5.1.11 | GroupartemBridgePeersGroup | current | Attributes of the results of bridge link auto-configuration scans. | |
| 1.3.6.1.4.1.4280.5.1.12 | GroupartemBridgeLinkTestGroup | current | Attributes for bridge link test. | |
| 1.3.6.1.4.1.4280.5.1.13 | GroupartemBridgeLinkNotificationGroup | current | artem notifications for bridge links | |
| 1.3.6.1.4.1.4280.5.2 | NodeartemAP | |||
| 1.3.6.1.4.1.4280.5.2.1 | TableartemAPServiceSetsTable | not-accessible | current | Attributes for artem AP service sets. |
| 1.3.6.1.4.1.4280.5.2.1.1 | RowartemAPServiceSetsEntry | not-accessible | current | An entry in artemAPServiceSetsTable. |
| 1.3.6.1.4.1.4280.5.2.1.1.1 | ColumnartemAPServiceSetIndex | not-accessible | current | This is the unique index number for a service set of the given radio. |
| 1.3.6.1.4.1.4280.5.2.1.1.2 | ColumnartemAPServiceSetsRowStatus | read-create | current | Auxiliary variable for creation of new object instances and/or the deletion of existing object instances. |
| 1.3.6.1.4.1.4280.5.2.1.1.3 | ColumnartemAPIfIndex | read-only | current | ifIndex that is associated to the combination of artemRadioIndex and artemAPServiceSetIndex. |
| 1.3.6.1.4.1.4280.5.2.1.1.4 | ColumnartemAPServiceSetAdminStatus | read-create | current | This attribute defines if the associated AP service is currently active. |
| 1.3.6.1.4.1.4280.5.2.9 | NodeartemAPNotification | |||
| 1.3.6.1.4.1.4280.5.2.10 | GroupartemAPGroup | current | Extended AP parameters not covered in standard 802.11 MIB. | |
| 1.3.6.1.4.1.4280.5.3 | TableartemRadioParametersTable | not-accessible | current | Table of WLAN radio parameters not covered in standard 802.11 MIB. |
| 1.3.6.1.4.1.4280.5.3.1 | RowartemRadioParametersEntry | not-accessible | current | An entry in artemRadioParametersTable. |
| 1.3.6.1.4.1.4280.5.3.1.1 | ColumnartemRadioIndex | not-accessible | current | The auxiliary variable used to identify instances of the columnar objects in the artemRadioParametersTable. |
| 1.3.6.1.4.1.4280.5.3.1.2 | ColumnartemRadioChannel | read-write | current | Selecting a radio channel by writing this attribute implicitly defines the radio band to use. Channels 1..14 implies 2.4 GHz Channels 30.. implies 5 GHz Select… |
| 1.3.6.1.4.1.4280.5.3.1.3 | ColumnartemRadioSpeedMode | read-write | current | This attribute selects the data rate to be used for transmissions. Selecting autoFallback activates automatic adaption of the data rate to the transmission con… |
| 1.3.6.1.4.1.4280.5.3.1.4 | ColumnartemRadioTxPower | read-write | current | Transmit power in dBm. |
| 1.3.6.1.4.1.4280.5.3.1.5 | ColumnartemRadioAntennaDiversity | read-write | current | This attribute selects the mode of antenna diversity. none(0) - No diversity, the main antenna is always used for transmission and receival. receive(1) - The m… |
| 1.3.6.1.4.1.4280.5.3.1.6 | ColumnartemRadioNitroMode | read-write | current | This attribute enables Conexant proprietary (but 100% 802.11g standard interoperable) frame bursting for increased data throughput, especially with mixed opera… |
| 1.3.6.1.4.1.4280.5.3.1.7 | ColumnartemRadioAckWindow | read-write | current | Additional 802.11 ACK timeout in microseconds. This must be set to non-zero value for radio distances larger than about 700m. Recommended setting is about 10 m… |
| 1.3.6.1.4.1.4280.5.3.1.8 | ColumnartemRadioWwrMode | read-write | current | This attribute enables/disables 802.11d and 802.11h support. none(0) - 802.11d disabled, 802.11h disabled. wwr11d(1) - 802.11d enabled, 802.11h disabled. wwr11… |
| 1.3.6.1.4.1.4280.5.3.1.9 | ColumnartemRadioOperatingMode | read-write | current | This attribute selects the operation mode for this radio. accessPoint(1) - select access point mode. bridge(2) - select bridge mode, up to 6 bridge links may b… |
| 1.3.6.1.4.1.4280.5.4 | TableartemInterfaceRadioTable | not-accessible | current | Table of connection between interfaces (ifIndex) and radio indices (artemWLANRadioIndex). |
| 1.3.6.1.4.1.4280.5.4.1 | RowartemInterfaceRadioEntry | not-accessible | current | An entry in artemInterfaceRadioTable. |
| 1.3.6.1.4.1.4280.5.4.1.1 | ColumnartemWLANRadioIndex | read-only | current | The auxiliary variable used to identify instances of the columnar objects in the artemRadioParametersTable. |
| 1.3.6.1.4.1.4280.5.8 | NodeartemWLANNotification | |||
| 1.3.6.1.4.1.4280.5.9 | GroupartemWLANGroup | current | Extended WLAN radio parameters not covered in standard 802.11 MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ArtemRSSI | INTEGER (-110..0) artemWLAN OBJECT-IDENTITY STATUS current DESCRIPTION "Definitions and attributes that apply to a radio module. The radio module may host one or more interfaces (AP service sets or bridge links)." ::= { artem 5 } | current | This type is used to represent receiver input levels in dBm. |