AS-2000
255 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751 | Nodelucent | |||
| 1.3.6.1.4.1.1751.1 | Nodeproducts | |||
| 1.3.6.1.4.1.1751.1.4 | NodeorinocoProducts | |||
| 1.3.6.1.4.1.1751.1.4.4 | Nodeas2000Product | |||
| 1.3.6.1.4.1.1751.2 | Nodemibs | |||
| 1.3.6.1.4.1.1751.2.4 | Nodeorinoco | |||
| 1.3.6.1.4.1.1751.2.4.3 | Nodeas2000 | |||
| 1.3.6.1.4.1.1751.2.4.3.3 | NodeorinocoInterface | |||
| 1.3.6.1.4.1.1751.2.4.3.3.2 | NodeorinocoPHY | |||
| 1.3.6.1.4.1.1751.2.4.3.3.2.1 | ScalarpliSystemName | read-write | mandatory | The sysName of the Access Server. This may be used for diagnostic purposes. This name will be the same as the sysName of the system group of MIB II |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2 | TablepsWlanIfTable | not-accessible | mandatory | The table contains the information about the wavelan interfaces present in the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1 | RowpsWlanIfEntry | not-accessible | mandatory | The entry in the wavelan interfac table. Described next. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.1 | ColumnpliWlanIfIndex | read-only | mandatory | A unique value for each interface. The value for each interface must remain constant at least from one re-initialization of the entity's network management sys… |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.2 | ColumnpliWlanIfNetworkName | read-write | mandatory | The network name of this wavelan interface |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.3 | ColumnpliWlanIfMACAddress | read-only | mandatory | The MAC address of the wavelan card present in this interface. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.4 | ColumnpliWlanIfMediumReservation | read-write | mandatory | The medium reservation value. The range is 0 - 2347. Default is 2347 - means disabled. Medium reservation specifies the number of octets in a message above whi… |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.5 | ColumnpliWlanIfTransmitRate | read-write | mandatory | The transmit rate of this interface. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.6 | ColumnpliWlanIfOperatingFrequency | read-write | mandatory | The RF channel that the Access Server is working on. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.7 | ColumnpliWlanIfAPDensity | read-write | mandatory | The AP density in the region. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.8 | ColumnpliWlanIfClosedSystem | read-write | mandatory | This flag identifies whether the Access Server will accept associate requests in this interface, from AS-Clients having a network name of 'ANY'. The Access Ser… |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.9 | ColumnpliWlanIfAllowedTransmitRates | read-only | mandatory | This variables reflects the transmit rates that the wavelan card supports |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.10 | ColumnpliWlanIfRegulatoryDomainList | read-only | mandatory | This variables reflects the regulatory domain the wavelan card belongs to. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.11 | ColumnpliWlanIfAllowedOperatingFrequencies | read-only | mandatory | This variables reflects the RF channels that the wavelan card supports. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.12 | ColumnpliWlanIfCapabilityOptions | read-only | mandatory | The capabilities of the card. Indicates the support of features like WEP. |
| 1.3.6.1.4.1.1751.2.4.3.3.2.2.1.13 | ColumnpliWlanIfProfileCode | read-only | mandatory | The varible conprises of a vendor indication (Lucent or an OEM customer) and a capability indication (eg. bronze or gold). |
| 1.3.6.1.4.1.1751.2.4.3.3.4 | NodeorinocoDriver | |||
| 1.3.6.1.4.1.1751.2.4.3.3.4.1 | ScalarpliDriverName | read-only | mandatory | The driver name. |
| 1.3.6.1.4.1.1751.2.4.3.3.4.2 | ScalarpliDriverVersion | read-only | mandatory | The driver's version number. This is a text string including the major and minor release number, and, optionally, the patch level: 'mm.nn.pp', where mm = major… |
| 1.3.6.1.4.1.1751.2.4.3.4 | NodeorinocoSNMPSetup | |||
| 1.3.6.1.4.1.1751.2.4.3.4.1 | ScalarpsSNMPReadPassword | write-only | mandatory | The password for reading object values from the agent. |
| 1.3.6.1.4.1.1751.2.4.3.4.2 | ScalarpsSNMPReadWritePassword | write-only | mandatory | The password for reading and modifying object values from the agent. |
| 1.3.6.1.4.1.1751.2.4.3.4.3 | ScalarpsSNMPTrapHostIPAddress | read-write | mandatory | The IP address of the host to which traps should be sent. |
| 1.3.6.1.4.1.1751.2.4.3.4.4 | ScalarpsSNMPTrapHostPassword | read-write | mandatory | The password sent with the trap to enable the management station to ignore unsolicited traps. |
| 1.3.6.1.4.1.1751.2.4.3.4.5 | ScalarpsSNMPManagerCount | read-only | mandatory | The number of management stations that have been authorised to manage this Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.4.6 | TablepsSNMPAccessTable | not-accessible | mandatory | The table containing the information about the managers authorised to manage this Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.4.6.1 | RowpsSNMPAccessTableEntry | not-accessible | mandatory | The entry in the SNMP access table. Described next. |
| 1.3.6.1.4.1.1751.2.4.3.4.6.1.1 | ColumnmanagerIndex | read-only | mandatory | Management station identification number. Is the index for the table. |
| 1.3.6.1.4.1.1751.2.4.3.4.6.1.2 | ColumnmanagerIPAddress | read-write | mandatory | IP address of the management station. |
| 1.3.6.1.4.1.1751.2.4.3.4.6.1.3 | ColumnmanagerSubnetMask | read-write | mandatory | The IP subnet mask. Used to grant access to a complete subnet. |
| 1.3.6.1.4.1.1751.2.4.3.4.6.1.4 | ColumnmanagerStatus | read-write | mandatory | Whether the manager is enabled or disabled. Used to delete the unwanted entries. |
| 1.3.6.1.4.1.1751.2.4.3.4.7 | ScalarpsSNMPInBadManagers | read-only | mandatory | The no of attempts to manage this Access Server by unauthorised managers. |
| 1.3.6.1.4.1.1751.2.4.3.4.8 | ScalarpsTestSNMPReadWritePassword | write-only | mandatory | The password for reading and modifying object values from the agent can be verified by setting this. |
| 1.3.6.1.4.1.1751.2.4.3.5 | NodeorinocoPPPSetup | |||
| 1.3.6.1.4.1.1751.2.4.3.5.1 | ScalarpsPPPIPAddressAssignmentType | read-write | mandatory | This identifies whether the IP addresses assigned to the AS-Clients are obtained through APM (address pool manager), through DHCP or through the RADIUS server. |
| 1.3.6.1.4.1.1751.2.4.3.5.2 | ScalarpsPPPNoOfMACIPMappingEntries | read-only | mandatory | The number of static mapping entries. |
| 1.3.6.1.4.1.1751.2.4.3.5.3 | TablepsPPPMACIPMappingTable | not-accessible | mandatory | This table contains the static mapping of MAC addresses to IP addresses. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1 | RowpsPPPMACIPMappingTableEntry | not-accessible | mandatory | The entry of the asPPPMACIPMappingTable Described below. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1.1 | ColumnmACIPIndex | read-only | mandatory | This is the index for the mappping table. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1.2 | ColumnmACAddress | read-write | mandatory | This is the MAC address. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1.3 | ColumniPAddress | read-write | mandatory | The IP address corresponding to the MAC address. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1.4 | Columncomment | read-write | mandatory | The comment for this entry, maybe the PC's owner. |
| 1.3.6.1.4.1.1751.2.4.3.5.3.1.5 | ColumnentryStatus | read-write | mandatory | Whether the entry is enabled or disabled. Used to delete the unwanted entries. |
| 1.3.6.1.4.1.1751.2.4.3.5.4 | ScalarpsPPPKeepAliveInterval | read-write | mandatory | The keep alive interval to be notified to the PPP layer. |
| 1.3.6.1.4.1.1751.2.4.3.5.5 | ScalarpsPPPNoOfKeepAliveTimeouts | read-write | mandatory | The maximum number of timeouts before the session is torn down. |
| 1.3.6.1.4.1.1751.2.4.3.5.6 | ScalarpsPPPPrimaryDNSIPAddress | read-write | mandatory | The IP address of the primary DNS server in the network. |
| 1.3.6.1.4.1.1751.2.4.3.5.7 | ScalarpsPPPSecondaryDNSIPAddress | read-write | mandatory | The IP address of the secondary DNS server in the network. |
| 1.3.6.1.4.1.1751.2.4.3.5.8 | ScalarpsPPPMaxNoOfUsers | read-write | mandatory | The maximum no of clients permitted to connect to this Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.5.9 | ScalarpsPPPCHAPStatus | read-write | mandatory | This variable indicates the status of CHAP in the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.5.10 | ScalarpsPPPCHAPPriority | read-write | mandatory | This variable indicates the priority of CHAP among all authentictaion protocols enabled on the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.5.11 | ScalarpsPPPPAPStatus | read-write | mandatory | This variable indicates the status of PAP in the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.5.12 | ScalarpsPPPPAPPriority | read-write | mandatory | This variable indicates the priority of PAP among all authentictaion protocols enabled on the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.5.13 | ScalarpsPPPPrimaryNBNSIPAddress | read-write | mandatory | The IP address of the Primary NBNS server in the network. |
| 1.3.6.1.4.1.1751.2.4.3.5.14 | ScalarpsPPPSecondaryNBNSIPAddress | read-write | mandatory | The IP address of the Secondary NBNS server in the network. |
| 1.3.6.1.4.1.1751.2.4.3.5.15 | TablepsPPPIPRangeTable | not-accessible | mandatory | This table contains the static mapping of MAC addresses to IP addresses. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1 | RowpsPPPIPRangeTableEntry | not-accessible | mandatory | The entry of the psPPPIPRangeTable. Described below. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.1 | ColumnpPPIPIndex | read-only | mandatory | This is the index for the IP range table. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.2 | ColumnstartIPAddress | read-write | mandatory | This is the staring IP address of this range. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.3 | ColumnendIPAddress | read-write | mandatory | This is the ending IP address of this range. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.4 | Columnwidth | read-write | mandatory | This is the withd of the range (no of addresses). |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.5 | Columnstatus | read-write | mandatory | The status of the entry, whether to be used or not used. Setting this to delete will remove this entry. |
| 1.3.6.1.4.1.1751.2.4.3.5.15.1.6 | ColumniPComment | read-write | mandatory | The comment for this entry may be the PC owner. |
| 1.3.6.1.4.1.1751.2.4.3.5.16 | ScalarpsPPPSessionIdleTimeOut | read-write | mandatory | The varible indicates the Session Idle time out. |
| 1.3.6.1.4.1.1751.2.4.3.6 | NodeorinocoAgent | |||
| 1.3.6.1.4.1.1751.2.4.3.6.1 | ScalarpsVersion | read-only | mandatory | The version of the Access Server software currently execuing. Would be text string including the major and minor release number, and, optionally, the patch lev… |
| 1.3.6.1.4.1.1751.2.4.3.6.2 | ScalarpsIPAddress | read-write | mandatory | The IP address to be assigned to the Access Server (to change from factory fitted IP address). |
| 1.3.6.1.4.1.1751.2.4.3.6.3 | ScalarpsSubnetMask | read-write | mandatory | The subnet mask of the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.6.4 | ScalarpsDefaultGateway | read-write | mandatory | The default gateway for the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.6.5 | ScalarpsIPAddressType | read-write | mandatory | This can be DHCP/BOOTP(dynamic) or assigned by User via CLI or AS Manager(static). The IP address of the Access Server will be assigned based on this. |
| 1.3.6.1.4.1.1751.2.4.3.6.6 | ScalarpsAdministrativeState | read-write | mandatory | The administrative state of the substation, can be Up or Down. |
| 1.3.6.1.4.1.1751.2.4.3.6.7 | ScalarpsTFTPIPAddress | read-write | mandatory | The IP address of the TFTP server. |
| 1.3.6.1.4.1.1751.2.4.3.6.8 | ScalarpsTFTPFilename | read-write | mandatory | The filename of the image in the TFTP server. |
| 1.3.6.1.4.1.1751.2.4.3.6.9 | ScalarpsTFTPOperation | write-only | mandatory | The operation to be done, can be upload or download. |
| 1.3.6.1.4.1.1751.2.4.3.6.10 | ScalarpsReboot | read-write | mandatory | This variable must be set to reboot the Access Server. The value is the number of seconds to wait to do a reboot. |
| 1.3.6.1.4.1.1751.2.4.3.6.11 | ScalarpsSecondsToAdminDown | read-write | mandatory | The count of seconds to go before the administrative state of the Access Server is made down. |
| 1.3.6.1.4.1.1751.2.4.3.6.12 | ScalarpsContactEmail | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.1751.2.4.3.6.13 | ScalarpsBSPBootloaderVersion | read-only | mandatory | This object represents the BSP/Bootloader version that is currently stored in the access server device.. |
| 1.3.6.1.4.1.1751.2.4.3.6.14 | ScalarpsTelnetSesssions | read-write | mandatory | This object is used to enable or disable telnet access and to specify the number of active telnet sessions. When this object is set to 0, telnet access is disa… |
| 1.3.6.1.4.1.1751.2.4.3.6.15 | ScalarpsTelnetPassword | write-only | mandatory | Password to access Access Server from Telenet. |
| 1.3.6.1.4.1.1751.2.4.3.6.16 | ScalarpsTelnetPort | read-write | mandatory | The TCP/IP port for Access Server Telenet daemon. |
| 1.3.6.1.4.1.1751.2.4.3.6.17 | ScalarpsTelnetTimeout | read-write | mandatory | Telnet inactivity timeout in minutes. The default value is 15 minutes |
| 1.3.6.1.4.1.1751.2.4.3.6.18 | ScalarpsTelnetLoginTimeout | read-write | mandatory | Telnet login timeout in seconds. The default value is 30 seconds |
| 1.3.6.1.4.1.1751.2.4.3.6.19 | ScalarpsSerialBaudRate | read-write | mandatory | Serial interface baud rate. The default value is 9600 |
| 1.3.6.1.4.1.1751.2.4.3.6.20 | ScalarpsSerialDataBits | read-only | mandatory | Serial interface data bits. The default value is 8 |
| 1.3.6.1.4.1.1751.2.4.3.6.21 | ScalarpsSerialParity | read-only | mandatory | Serial interface Parity check. The default value is None |
| 1.3.6.1.4.1.1751.2.4.3.6.22 | ScalarpsSerialStopBits | read-only | mandatory | Serial interface stop bits. The default value is 1 |
| 1.3.6.1.4.1.1751.2.4.3.6.23 | ScalarpsSerialFlowControl | read-write | mandatory | Serial interface Flow control. The default value is None |
| 1.3.6.1.4.1.1751.2.4.3.6.24 | ScalarpsTFTPFileType | read-write | mandatory | The type of the file to be uploaded or downloaded to/from the access server. The AllConfigFiles options shall upload or download all the configuration files su… |
| 1.3.6.1.4.1.1751.2.4.3.6.25 | ScalarpsDeviceSerialNumber | read-only | mandatory | This parameter identifies the serial number of the system. |
| 1.3.6.1.4.1.1751.2.4.3.6.26 | ScalarpsBroadcastMessage | read-only | mandatory | This parameter allows to set customized messages to be sent to all connected clients. |
| 1.3.6.1.4.1.1751.2.4.3.6.27 | ScalarpsPOSTVersionNumber | read-only | mandatory | This parameter identifies the POST version number of the system. |
| 1.3.6.1.4.1.1751.2.4.3.6.28 | ScalarpsHardwareVersionNumber | read-only | mandatory | This parameter identifies the Hardware version number of the system. |
| 1.3.6.1.4.1.1751.2.4.3.7 | Noderadius | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2 | NoderadiusClientMIB | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2.1 | NoderadiusClientMIBObjects | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1 | NoderadiusClient | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.1 | ScalarradiusClientInvalidServerAddresses | read-only | mandatory | The total number of RADIUS Access-Response messages received from unknown addresses since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2 | TableradiusServerTable | not-accessible | mandatory | The (conceptual) table listing the RADIUS servers with which the client shares a secret. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1 | RowradiusServerEntry | not-accessible | mandatory | An entry (conceptual row) representing a RADIUS server with which the client shares a secret. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.1 | ColumnradiusServerIndex | read-only | mandatory | The RADIUS server with whom the client interacts. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.2 | ColumnradiusServerType | read-only | mandatory | The RADIUS server type (Authentication or Accounting or Both). For creating a server entry Server Type should be set |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.3 | ColumnradiusServerAddress | read-write | mandatory | The IP address of the RADIUS server referred to in this table entry. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.4 | ColumnradiusServerDestPortAuth | read-write | mandatory | The Authentication port of the RADIUS Server. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.5 | ColumnradiusServerDestPortAcct | read-write | mandatory | The Accounting port of the RADIUS Server. |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.6 | ColumnradiusClientAccessRequests | read-only | mandatory | The total number of RADIUS Access-Request messages sent since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.7 | ColumnradiusClientAccessRetransmissions | read-only | mandatory | The total number of RADIUS Access-Request messages retransmitted since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.8 | ColumnradiusClientAccessAccepts | read-only | mandatory | The total number of RADIUS Access-Accept messages received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.9 | ColumnradiusClientAccessChallenges | read-only | mandatory | The total number of RADIUS Access-Challenge messages received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.10 | ColumnradiusClientMalformedAccessResponses | read-only | mandatory | The total number of malformed RADIUS Access-Response messages received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.11 | ColumnradiusClientAuthenticationBadAuthenticators | read-only | mandatory | The total number of RADIUS Access-Response messages containing invalid authenticators received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.12 | ColumnradiusClientAccessRejects | read-only | mandatory | The total number of RADIUS Access-Reject messages sent since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.13 | ColumnradiusClientTimeouts | read-only | mandatory | The total number of timeouts since client startup |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.14 | ColumnradiusClientAccountingRequests | read-only | mandatory | The total number of RADIUS Accounting-Request messages sent since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.15 | ColumnradiusClientAccountingRetransmissions | read-only | mandatory | The total number of RADIUS Accounting-Request messages retransmitted since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.16 | ColumnradiusClientAccountingResponses | read-only | mandatory | The total number of RADIUS Accounting-Response messages received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.17 | ColumnradiusClientAccountingBadAuthenticators | read-only | mandatory | The total number of RADIUS Accounting-Response messages which contained invalid authenticators received since client start-up |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.18 | ColumnradiusServerSharedSecret | read-write | mandatory | The secret string which is shared between Server and Client |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.19 | ColumnradiusServerEnabled | read-write | mandatory | Flag to tell whether the server is active or Inactive |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.20 | ColumnradiusServerResponseTime | read-write | mandatory | The maximum time within which the server has to respond for a request from the client |
| 1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.21 | ColumnradiusServerMaximumRetransmission | read-write | mandatory | The allowed maximum no. of trials to be tried by a client to get response from the server for a request |
| 1.3.6.1.4.1.1751.2.4.3.7.2.2 | NoderadiusClientMIBConformance | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2.2.1 | NoderadiusClientMIBCompliances | |||
| 1.3.6.1.4.1.1751.2.4.3.7.2.2.2 | NoderadiusClientMIBGroups | |||
| 1.3.6.1.4.1.1751.2.4.3.8 | NodeorinocoShimECPSetup | |||
| 1.3.6.1.4.1.1751.2.4.3.8.1 | ScalarpsShimECPRetransmissionCount | read-write | mandatory | The number of retransmissions when responses are not received with the timeout period. |
| 1.3.6.1.4.1.1751.2.4.3.8.2 | ScalarpsShimECPRepeatResponseCount | read-write | mandatory | The number of time the transmitted response can be retransmitted. |
| 1.3.6.1.4.1.1751.2.4.3.8.3 | ScalarpsShimECPRetransmissionTimeout | read-write | mandatory | The timeout interval for a response to be received. |
| 1.3.6.1.4.1.1751.2.4.3.10 | NodeorinocoDiagnostics | |||
| 1.3.6.1.4.1.1751.2.4.3.11 | NodeorinocoIAPP | |||
| 1.3.6.1.4.1.1751.2.4.3.11.1 | ScalarpsIappStatus | read-write | mandatory | IAPP Status (whether IAPP feature should be enabled or diaabled) |
| 1.3.6.1.4.1.1751.2.4.3.11.2 | ScalarpsIappAnnReqOut | read-only | mandatory | Number of ANNOUNCE.requests sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.3 | ScalarpsIappAnnReqIn | read-only | mandatory | Number of ANNOUNCE.requests received. |
| 1.3.6.1.4.1.1751.2.4.3.11.4 | ScalarpsIappAnnRespOut | read-only | mandatory | Number of ANNOUNCE.responses sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.5 | ScalarpsIappAnnRespIn | read-only | mandatory | Number of ANNOUNCE.responses received. |
| 1.3.6.1.4.1.1751.2.4.3.11.6 | ScalarpsIappHandOvrReqOut | read-only | mandatory | Number of HANDOVER.request sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.7 | ScalarpsIappHandOvrReqIn | read-only | mandatory | Number of HANDOVER.request received. |
| 1.3.6.1.4.1.1751.2.4.3.11.8 | ScalarpsIappHandOvrRespOut | read-only | mandatory | Number of HANDOVER.responses sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.9 | ScalarpsIappHandOvrRespIn | read-only | mandatory | Number of HANDOVER.responses received. |
| 1.3.6.1.4.1.1751.2.4.3.11.10 | ScalarpsIappEndSessOut | read-only | mandatory | Number of IAPP End-PPP session PDUs sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.11 | ScalarpsIappEndSessIn | read-only | mandatory | Number of IAPP End-PPP session PDUs received. |
| 1.3.6.1.4.1.1751.2.4.3.11.12 | ScalarpsIappEndSessAckOut | read-only | mandatory | Number of IAPP End-PPP session acknowledgement PDUs sent. |
| 1.3.6.1.4.1.1751.2.4.3.11.13 | ScalarpsIappEndSessAckIn | read-only | mandatory | Number of IAPP End-PPP session acknowledgement PDUs received. |
| 1.3.6.1.4.1.1751.2.4.3.11.14 | ScalarpsIappPduDrops | read-only | mandatory | Number of IAPP PDUs dropped. |
| 1.3.6.1.4.1.1751.2.4.3.11.15 | ScalarpsIappHandOvrReqReSent | read-only | mandatory | Number of HANDOVER requests re-transmitted.. |
| 1.3.6.1.4.1.1751.2.4.3.11.16 | ScalarpsIappAnnInterval | read-write | mandatory | This parameter represents interval in seconds for performing an IAPP announce operation by the device. The units for this parameter is seconds and default valu… |
| 1.3.6.1.4.1.1751.2.4.3.11.17 | ScalarpsIappAnnRespTime | read-only | mandatory | This parameter indicates the amount of time in seconds the device waits to send an IAPP announce response after an announce request message is sent. This param… |
| 1.3.6.1.4.1.1751.2.4.3.11.18 | ScalarpsIappHandOvrTimeOut | read-write | mandatory | This parameter represents the time in milliseconds the device waits before it resends a handover response message. The default value for this parameter should … |
| 1.3.6.1.4.1.1751.2.4.3.11.19 | ScalarpsIappMaxHandOvrRetries | read-write | mandatory | This parameter indicates the maximum amount of retransmission sent by the device for a handover request message. The default for this parameter should be 2. |
| 1.3.6.1.4.1.1751.2.4.3.11.20 | ScalarpsIappRoamingClients | read-only | mandatory | Number of roaming clients currently attached to the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.12 | NodeorinocoIPX | |||
| 1.3.6.1.4.1.1751.2.4.3.12.1 | ScalarpsIpxStatus | read-write | mandatory | Which protocol is supported, i.e, IP or IPX or both IP and IPX. |
| 1.3.6.1.4.1.1751.2.4.3.12.2 | ScalarpsIpxDefaultRouterNodeNum | read-write | mandatory | If the source IPX network number is not equal to the destination IPX Network number in the packet from wireless side to the wired side, then replace the destin… |
| 1.3.6.1.4.1.1751.2.4.3.12.3 | ScalarpsIpxWiredToWlessBridged | read-only | mandatory | Number of packets bridged from wired side to wireless side. |
| 1.3.6.1.4.1.1751.2.4.3.12.4 | ScalarpsIpxWlessToWiredBridged | read-only | mandatory | Number of packets bridged from wiredless side to wired side. |
| 1.3.6.1.4.1.1751.2.4.3.12.5 | ScalarpsIpxEthernetEncapsulationFormat | read-write | mandatory | Encapsulation type to be used for the IPX packets sent in wired side |
| 1.3.6.1.4.1.1751.2.4.3.12.6 | TablepsASClientTable | not-accessible | mandatory | The (conceptual) table listing the ASClients (IPX) connected to the access server 2000 device. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1 | RowpsASClientEntry | not-accessible | mandatory | An entry (conceptual row) representing a ASClient (IPX) connnected to the Access Server 2000 device. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.1 | ColumnpsPPPSessionId | read-only | mandatory | The PPP Session ID assigned by the AS-2000 to this ASClient. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.2 | ColumnpsIpxClientNetworkNumber | read-only | mandatory | The IPX Node Number assigned by the Novell Server to this IPX client. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.3 | ColumnpsIpxClientMAC | read-only | mandatory | The Wireless MAC of this IPX Client. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.4 | ColumnpsIpxClientStatus | read-write | mandatory | Flag to indicate whether the IPX Client is Active or Inactive. IPX Client status can also be disabled/enabled/deleted. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.5 | ColumnpsASClientSessionUpTime | read-only | mandatory | This object represents the session up time for each AS Client or PPP virttual interface. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.6 | ColumnpsASClientPacketsIn | read-only | mandatory | This object represents the number of packets (unicast and non-unicast)recieved for each AS Client or PPP virttual interface. |
| 1.3.6.1.4.1.1751.2.4.3.12.6.1.7 | ColumnpsASClientPacketsOut | read-only | mandatory | This object represents the number of packets (unicast and non-unicast)sent for each AS Client or PPP virttual interface. |
| 1.3.6.1.4.1.1751.2.4.3.13 | NodeorinocoLinkTest | |||
| 1.3.6.1.4.1.1751.2.4.3.13.1 | ScalaroriLinkTestTimeOut | read-write | mandatory | The value of this parameter determines the time that a link test will continue without any SNMP requests for a Link Test Table entry. When the time expires the… |
| 1.3.6.1.4.1.1751.2.4.3.13.3 | ScalaroriLinkTestInterval | read-write | mandatory | This parameter indicates the interval (in millisec) between sending link test frames to a station. Default on 200 millisecond. |
| 1.3.6.1.4.1.1751.2.4.3.13.4 | ScalaroriLinkTestExplore | read-write | mandatory | When this parameter is set to 2, the access point will send out an explore request on all 802.11 interfaces and from the results build the Link Test table. Thi… |
| 1.3.6.1.4.1.1751.2.4.3.13.5 | TableoriLinkTestTable | not-accessible | mandatory | This table contains the information for the stations currently associated with this access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1 | RoworiLinkTestTableEntry | not-accessible | mandatory | This parameter represents the entry in the Remote Link Test table.This is described below. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.1 | ColumnoriLinkTestTableIndex | read-only | mandatory | This parameter represents a unique value for each stattion. The value for each station must remain constant at least from one explore to the next. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.2 | ColumnoriLinkTestInProgress | read-write | mandatory | When this parameter is set to 2 the access point will initiate a link test sequence with this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.3 | ColumnoriLinkTestStationName | read-only | mandatory | This parameter identifies the name of the station whom which the link test is being performed. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.4 | ColumnoriLinkTestMACAddress | read-only | mandatory | This variable represents the MAC address that will be mapped to the IP Address of the station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.5 | ColumnoriLinkTestStationProfile | read-only | mandatory | This parameter represents the profile/capabilities for this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.6 | ColumnoriLinkTestOurCurSignalLevel | read-only | mandatory | The current signal level (in dB)for the link test from this station. This variable indicates the running average of the local signal level using the algorithm … |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.7 | ColumnoriLinkTestOurCurNoiseLevel | read-only | mandatory | The current noise level (in dB)for the link test to this station. This variable indicates the running average of the local noise level. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.8 | ColumnoriLinkTestOurCurSNR | read-only | mandatory | The current signal to noise ratio for the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.9 | ColumnoriLinkTestOurMinSignalLevel | read-only | mandatory | The minimum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.10 | ColumnoriLinkTestOurMinNoiseLevel | read-only | mandatory | The minimum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.11 | ColumnoriLinkTestOurMinSNR | read-only | mandatory | The minimum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.12 | ColumnoriLinkTestOurMaxSignalLevel | read-only | mandatory | The maximum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.13 | ColumnoriLinkTestOurMaxNoiseLevel | read-only | mandatory | The maximum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.14 | ColumnoriLinkTestOurMaxSNR | read-only | mandatory | The maximum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.15 | ColumnoriLinkTestOurLowFrameCount | read-only | mandatory | The total number of frames sent at 1 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.16 | ColumnoriLinkTestOurStandardFrameCount | read-only | mandatory | The total number of frames sent at 2 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.17 | ColumnoriLinkTestOurMediumFrameCount | read-only | mandatory | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.18 | ColumnoriLinkTestOurHighFrameCount | read-only | mandatory | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 8 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.19 | ColumnoriLinkTestHisCurSignalLevel | read-only | mandatory | The current signal level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.20 | ColumnoriLinkTestHisCurNoiseLevel | read-only | mandatory | The current noise level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.21 | ColumnoriLinkTestHisCurSNR | read-only | mandatory | The current signal to noise ratio for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.22 | ColumnoriLinkTestHisMinSignalLevel | read-only | mandatory | The minimum signal level during the link test to the remote statio or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.23 | ColumnoriLinkTestHisMinNoiseLevel | read-only | mandatory | The minimum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.24 | ColumnoriLinkTestHisMinSNR | read-only | mandatory | The minimum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.25 | ColumnoriLinkTestHisMaxSignalLevel | read-only | mandatory | The maximum signal level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.26 | ColumnoriLinkTestHisMaxNoiseLevel | read-only | mandatory | The maximum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.27 | ColumnoriLinkTestHisMaxSNR | read-only | mandatory | The maximum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.28 | ColumnoriLinkTestHisLowFrameCount | read-only | mandatory | The total number of frames sent at 1 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.29 | ColumnoriLinkTestHisStandardFrameCount | read-only | mandatory | The total number of frames sent at 2 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.30 | ColumnoriLinkTestHisMediumFrameCount | read-only | mandatory | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.31 | ColumnoriLinkTestHisHighFrameCount | read-only | mandatory | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.32 | ColumnoriLinkTestInterface | read-only | mandatory | The PCMCIA Card Number to which the Client has sent the Explore Response Message. |
| 1.3.6.1.4.1.1751.2.4.3.13.5.1.33 | ColumnoriLinkTestRadioType | read-only | mandatory | The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the Radio. |
| 1.3.6.1.4.1.1751.2.4.3.15 | NodeaccessServerTraps | |||
| 1.3.6.1.4.1.1751.2.4.3.15.1 | NodeaccessServerTrapVariables | |||
| 1.3.6.1.4.1.1751.2.4.3.15.1.1 | ScalaraccessServerGenericInformationMessage | not-accessible | mandatory | Any generic string information can be sent as this message. |
| 1.3.6.1.4.1.1751.2.4.3.15.1.2 | ScalaraccessServerMacAddress | not-accessible | mandatory | The MAC address that is sent with the traps to identify which Access Server has the problem |
| 1.3.6.1.4.1.1751.2.4.3.15.1.3 | ScalaraccessServerFailedTFTPServerAddress | not-accessible | mandatory | The ip address configured as the TFTP server for which the operation upload/download failed. |
| 1.3.6.1.4.1.1751.2.4.3.15.1.4 | ScalaraccessServerFailedTFTPFilename | not-accessible | mandatory | The filename configured to be retrieved/sent from/to the TFTP server for which the operation upload/download failed. |
| 1.3.6.1.4.1.1751.2.4.3.15.1.5 | ScalaraccessServerFailedTFTPOperation | not-accessible | mandatory | This variable used in conjunction with the different TFTP traps ( TFTPInitiated, TFTPFailed, TFTPCompleted) |
| 1.3.6.1.4.1.1751.2.4.3.15.1.6 | ScalaraccessServerSuspendedTaskName | not-accessible | mandatory | The task that was suspended, can be several tasks executed within the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.15.1.7 | ScalaraccessServerWirelessCard | not-accessible | mandatory | This trap variable is used to determine on which Wireless Card, PC Card A or PC Card B, a wireless TRAP has occured on. |
| 1.3.6.1.4.1.1751.2.4.3.15.2 | NodeaccessServerFlashRelatedTraps | |||
| 1.3.6.1.4.1.1751.2.4.3.15.2.1 | NodeaccessServerFlashEmpty | This trap is sent when the FLASH is empty. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.2.2 | NodeaccessServerFlashCorrupted | This trap is sent when the data in the FLASH is corrupted. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3 | NodeaccessServerConfigurationRelatedTraps | |||
| 1.3.6.1.4.1.1751.2.4.3.15.3.1 | NodeaccessServerInvalidKey | This trap is sent when an invalid key is detected at the accessServer. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.2 | NodeaccessServerAPMNotConfigured | This trap is sent when the APM information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.3 | NodeaccessServerWLCIncompatibleFirmware | This trap is sent when an ORiNOCO PC Card plugged in the Access Server is not compatible with the firmware versions supported. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.4 | NodeaccessServerWLCFailure | This trap is sent when an ORiNOCO PC Card is not present or there is a failure in the ORiNOCO PC card. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.5 | NodeaccessServerWLCRemoval | This trap is generated when the ORiNOCO PC Card is removed from the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.6 | NodeaccessServerRadiusNotConfigured | This trap is sent when the radius information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.7 | NodeaccessServerDNSIPNotConfigured | This trap is sent when the DNS IP information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.8 | NodeaccessServerNBNSIPNotConfigured | This trap is sent when the NBNS IP information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.9 | NodeaccessServerRadiusAuthenticationNotConfigured | This trap is sent when the radius authentication information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.10 | NodeaccessServerRadiusAccountingNotConfigured | This trap is sent when the radius accounting information is not configured in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.11 | NodeaccessServerDuplicateIPAddressEncountered | This trap is sent when the IP Address of the Access Server is also used by someother device in the network. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.12 | NodeaccessServerWLCVoltageDiscrepancy | This trap is sent when non 5volt card or 3.3 v card is inserted in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.13 | NodeaccessServerWLCIncompatibleVendor | This trap is generated when an incompatible wireless vendor card is inserted or present in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.3.14 | NodeaccessServerWLCFirmwareDownloadFailure | This trap is generated when a failure occurs during the firmware download process. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4 | NodeaccessServerDiagnosticTraps | |||
| 1.3.6.1.4.1.1751.2.4.3.15.4.1 | NodeaccessServerTFTPInitiated | This trap is sent when a TFTP operation happens at the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.2 | NodeaccessServerTFTPCompleted | This trap is sent when a TFTP operation failure happens at the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.3 | NodeaccessServerTFTPFailure | This trap is sent when a TFTP operation failure happens at the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.4 | NodeaccessServerAdminStateMadeUp | This trap is sent when the Access Server Admin state is made 'up' | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.5 | NodeaccessServerAdminStateMadeDown | This trap is sent when the Access Server Admin state is made 'down' | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.6 | NodeaccessServerRebootingNow | This trap is sent when the Access Server is about to reboot. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.7 | NodeaccessServerTaskSuspended | This trap is sent when a task has suspended in the Access Server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.8 | NodeaccessServerBootPFailed | This trap is sent when the BootP protocol in the bootloader has failed. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.4.9 | NodeaccessServerDHCPFailed | This trap is sent when the DHCP in the application software has failed. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.5 | NodeaccessServerImageTraps | |||
| 1.3.6.1.4.1.1751.2.4.3.15.5.1 | NodeaccessServerZeroSizeImage | This trap is sent when an image of size zero (0) is downloaded to the access server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.5.2 | NodeaccessServerNonVxWorksImage | This trap is sent when a non-VxWorks image is downloaded to the access server. | ||
| 1.3.6.1.4.1.1751.2.4.3.15.5.3 | NodeaccessServerImageTooLarge | This trap is sent when the image downloaded to the access server exceeds the size limitation of 5 MB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |