ASCEND-MIBDMTALNET-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.10 | NodemibdmtAlDslNetworkProfile | |||
| 1.3.6.1.4.1.529.23.10.1 | TablemibdmtAlDslNetworkProfileTable | not-accessible | mandatory | A list of mibdmtAlDslNetworkProfile profile entries. |
| 1.3.6.1.4.1.529.23.10.1.1 | RowmibdmtAlDslNetworkProfileEntry | not-accessible | mandatory | A mibdmtAlDslNetworkProfile entry containing objects that maps to the parameters of mibdmtAlDslNetworkProfile profile. |
| 1.3.6.1.4.1.529.23.10.1.1.1 | ColumndmtAlDslNetworkProfile-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.10.1.1.2 | ColumndmtAlDslNetworkProfile-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.10.1.1.3 | ColumndmtAlDslNetworkProfile-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.10.1.1.4 | ColumndmtAlDslNetworkProfile-Name | read-write | mandatory | For future use. The current design does not use the name field but instead references Cell Based Dmt Adsl lines by the physical address; we may in the future s… |
| 1.3.6.1.4.1.529.23.10.1.1.5 | ColumndmtAlDslNetworkProfile-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.6 | ColumndmtAlDslNetworkProfile-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.7 | ColumndmtAlDslNetworkProfile-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.10.1.1.8 | ColumndmtAlDslNetworkProfile-Enabled | read-write | mandatory | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.10.1.1.9 | ColumndmtAlDslNetworkProfile-ProfileNumber | read-write | mandatory | For potential backwards compatibility. The current design consists of one line profile numbered 0. |
| 1.3.6.1.4.1.529.23.10.1.1.11 | ColumndmtAlDslNetworkProfile-LineConfig-NailedGroup | read-write | mandatory | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.10.1.1.19 | ColumndmtAlDslNetworkProfile-LineConfig-RateAdaptModeUp | read-write | mandatory | The up stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.20 | ColumndmtAlDslNetworkProfile-LineConfig-RateAdaptModeDown | read-write | mandatory | The down stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.21 | ColumndmtAlDslNetworkProfile-LineConfig-RateAdaptRatioUp | read-write | mandatory | The ratio in percent of excess bitrate distribution over the up stream fast and interleaved latencies. 100% - fast path , 0% - interleaved path. Valid ONLY in … |
| 1.3.6.1.4.1.529.23.10.1.1.22 | ColumndmtAlDslNetworkProfile-LineConfig-RateAdaptRatioDown | read-write | mandatory | The ratio in percent of excess bitrate distribution over the down stream fast and interleaved latencies. 100% - fast path , 0% - interleaved path. Valid ONLY i… |
| 1.3.6.1.4.1.529.23.10.1.1.25 | ColumndmtAlDslNetworkProfile-LineConfig-MaxPowerSpectralDensity | read-write | mandatory | The power spectral density in dBm/Hz allowed on the line. Decreasing the value may reduce capacity. Defined for downstream only. Actual value is negative. |
| 1.3.6.1.4.1.529.23.10.1.1.26 | ColumndmtAlDslNetworkProfile-FastPathConfig-MinBitrateUp | read-write | mandatory | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.27 | ColumndmtAlDslNetworkProfile-FastPathConfig-MinBitrateDown | read-write | mandatory | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.28 | ColumndmtAlDslNetworkProfile-FastPathConfig-MaxBitrateUp | read-write | mandatory | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.29 | ColumndmtAlDslNetworkProfile-FastPathConfig-MaxBitrateDown | read-write | mandatory | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.30 | ColumndmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateUp | read-write | mandatory | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.31 | ColumndmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateDown | read-write | mandatory | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.32 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateUp | read-write | mandatory | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.33 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateDown | read-write | mandatory | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.34 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateUp | read-write | mandatory | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.35 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateDown | read-write | mandatory | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.36 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateUp | read-write | mandatory | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.37 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateDown | read-write | mandatory | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.38 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayUp | read-write | mandatory | The maximum allowed up stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.39 | ColumndmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayDown | read-write | mandatory | The maximum allowed down stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.40 | ColumndmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginUp | read-write | mandatory | The up stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.41 | ColumndmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginDown | read-write | mandatory | The down stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.42 | ColumndmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginUp | read-write | mandatory | The up stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls below this level the ATU shall atte… |
| 1.3.6.1.4.1.529.23.10.1.1.43 | ColumndmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginDown | read-write | mandatory | The down stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls below this level the ATU shall at… |
| 1.3.6.1.4.1.529.23.10.1.1.44 | ColumndmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginUp | read-write | mandatory | The up stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7. If current noise margin is abov… |
| 1.3.6.1.4.1.529.23.10.1.1.45 | ColumndmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginDown | read-write | mandatory | The down stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7. If current noise margin is ab… |
| 1.3.6.1.4.1.529.23.10.1.1.46 | ColumndmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginUp | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is below this parameter for more than ra-downshift-int-up sec, modem shall at… |
| 1.3.6.1.4.1.529.23.10.1.1.47 | ColumndmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntUp | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is below ra-downshift-margin-up for more than this, modem shall attemp t… |
| 1.3.6.1.4.1.529.23.10.1.1.48 | ColumndmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginDown | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is below this parameter for more than ra-downshift-int-down sec, modem shal… |
| 1.3.6.1.4.1.529.23.10.1.1.49 | ColumndmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntDown | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is below ra-downshift-margin-down for more than this, modem shall atte… |
| 1.3.6.1.4.1.529.23.10.1.1.50 | ColumndmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginUp | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is above this parameter for more than ra-downshift-int-up sec, modem shall at… |
| 1.3.6.1.4.1.529.23.10.1.1.51 | ColumndmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntUp | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is above ra-downshift-margin-up for more than this, modem shall attemp t… |
| 1.3.6.1.4.1.529.23.10.1.1.52 | ColumndmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginDown | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is above this parameter for more than ra-downshift-int-down sec, modem shal… |
| 1.3.6.1.4.1.529.23.10.1.1.53 | ColumndmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntDown | read-write | mandatory | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is above ra-downshift-margin-down for more than this, modem shall atte… |
| 1.3.6.1.4.1.529.23.10.1.1.54 | ColumndmtAlDslNetworkProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.10.1.1.55 | ColumndmtAlDslNetworkProfile-LineConfig-VpSwitchingVpi | read-write | mandatory | The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect … |
| 1.3.6.1.4.1.529.23.10.1.1.56 | ColumndmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelUp | read-write | mandatory | The maximum aggregate output power in dBm allowed on the line in the up stream direction. Increasing value may result in capacity boosting. |
| 1.3.6.1.4.1.529.23.10.1.1.57 | ColumndmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelDown | read-write | mandatory | The maximum aggregate output power in dBm allowed on the line in the down stream direction. Increasing value may result in capacity boosting. |
| 1.3.6.1.4.1.529.23.10.1.1.58 | ColumndmtAlDslNetworkProfile-LineConfig-LineCode | read-write | mandatory | The DMT line code is used for the training. NOTE: for the ADSL 12-ports LIM card only (which uses the ALCATEL chipset), setting the line code to ansi-dmt will … |
| 1.3.6.1.4.1.529.23.10.1.1.59 | ColumndmtAlDslNetworkProfile-LineConfig-LineLatencyDown | read-write | mandatory | The DMT line latency to be used for the downstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.60 | ColumndmtAlDslNetworkProfile-LineConfig-LineLatencyUp | read-write | mandatory | The DMT line latency to be used for the upstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.61 | ColumndmtAlDslNetworkProfile-LineConfig-TrellisEncoding | read-write | mandatory | TRUE if trellis encoding is to be enabled, FALSE otherwise. |
| 1.3.6.1.4.1.529.23.10.1.1.62 | ColumndmtAlDslNetworkProfile-LineConfig-GainDefault | read-write | mandatory | The default gain value in db to be used for the AGC. |
| 1.3.6.1.4.1.529.23.10.1.1.63 | ColumndmtAlDslNetworkProfile-SparingMode | read-write | mandatory | Port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.64 | ColumndmtAlDslNetworkProfile-LineConfig-UpstreamStartBin | read-write | mandatory | The starting upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.65 | ColumndmtAlDslNetworkProfile-LineConfig-UpstreamEndBin | read-write | mandatory | The ending upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.66 | ColumndmtAlDslNetworkProfile-LineConfig-DownstreamStartBin | read-write | mandatory | The starting downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.67 | ColumndmtAlDslNetworkProfile-LineConfig-DownstreamEndBin | read-write | mandatory | The ending downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.69 | ColumndmtAlDslNetworkProfile-LineConfig-LoopBack | read-write | mandatory | Configuration of different modem loopbacks. |
| 1.3.6.1.4.1.529.23.10.1.1.70 | ColumndmtAlDslNetworkProfile-LineConfig-BitSwapping | read-write | mandatory | Controls wether Bit-Swapping is enabled or no. On 12 port DMT card and 48 port G.lite card has not effect. |
| 1.3.6.1.4.1.529.23.10.1.1.71 | ColumndmtAlDslNetworkProfile-LineConfig-FbmDbmMode | read-write | mandatory | Controls wether the line is in Fixed-Bit-Map or Dual-Bit-Map mode. Only relevant for Annex-C cards. |
| 1.3.6.1.4.1.529.23.10.1.1.72 | ColumndmtAlDslNetworkProfile-ThreshProfile | read-write | mandatory | The name of the DSL-THRESHOLD profile which applies to this ADSL line. |
| 1.3.6.1.4.1.529.23.10.1.1.73 | ColumndmtAlDslNetworkProfile-IgnoreLineup | read-write | mandatory | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.74 | ColumndmtAlDslNetworkProfile-LineConfig-AlcatelUs413Boost | read-write | mandatory | Provides an increase in upstream rate in T1.413 mode for 24/48 Port Annex A boards based on the Globespan chip set when connected to an Alcatel CPE. Irrelevant… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |