ASCEND-MIBE3ATMNET-MIB
58 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.15 | Nodemibe3AtmNetworkProfile | |||
| 1.3.6.1.4.1.529.23.15.1 | Tablemibe3AtmNetworkProfileTable | not-accessible | mandatory | A list of mibe3AtmNetworkProfile profile entries. |
| 1.3.6.1.4.1.529.23.15.1.1 | Rowmibe3AtmNetworkProfileEntry | not-accessible | mandatory | A mibe3AtmNetworkProfile entry containing objects that maps to the parameters of mibe3AtmNetworkProfile profile. |
| 1.3.6.1.4.1.529.23.15.1.1.1 | Columne3AtmNetworkProfile-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.1.1.2 | Columne3AtmNetworkProfile-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.1.1.3 | Columne3AtmNetworkProfile-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.1.1.4 | Columne3AtmNetworkProfile-Name | read-write | mandatory | For future use. The current design does not use the name field but instead references E3-ATM lines by the physical address; we may in the future support refere… |
| 1.3.6.1.4.1.529.23.15.1.1.5 | Columne3AtmNetworkProfile-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.6 | Columne3AtmNetworkProfile-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.7 | Columne3AtmNetworkProfile-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.8 | Columne3AtmNetworkProfile-Enabled | read-write | mandatory | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.9 | Columne3AtmNetworkProfile-LineConfig-TrunkGroup | read-write | mandatory | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.15.1.1.10 | Columne3AtmNetworkProfile-LineConfig-NailedGroup | read-write | mandatory | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.15.1.1.14 | Columne3AtmNetworkProfile-LineConfig-Loopback | read-write | mandatory | Loopback mode. |
| 1.3.6.1.4.1.529.23.15.1.1.15 | Columne3AtmNetworkProfile-LineConfig-HighTxOutput | read-write | mandatory | TRUE if the E3 cable length is more than 300 ft, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.16 | Columne3AtmNetworkProfile-LineConfig-FramerMode | read-write | mandatory | The E3 ATM framer mode. |
| 1.3.6.1.4.1.529.23.15.1.1.17 | Columne3AtmNetworkProfile-LineConfig-VpiVciRange | read-write | mandatory | The E3 ATM valid VPI/VCI value range. |
| 1.3.6.1.4.1.529.23.15.1.1.18 | Columne3AtmNetworkProfile-LineConfig-CellPayloadScramble | read-write | mandatory | TRUE if the cell payload scrambling is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.19 | Columne3AtmNetworkProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.15.1.1.20 | Columne3AtmNetworkProfile-LineConfig-ReceiveEqualization | read-write | mandatory | TRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 300 ft. |
| 1.3.6.1.4.1.529.23.15.1.1.21 | Columne3AtmNetworkProfile-LineConfig-ClockSource | read-write | mandatory | Determine whether the 8KHz clock from the E3-ATM board is eligible to be used as the system-wide TDM clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.22 | Columne3AtmNetworkProfile-LineConfig-ClockPriority | read-write | mandatory | Clock priority assigned to the E3-ATM line. Used to select a particular E3 line as clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.23 | Columne3AtmNetworkProfile-SparePhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.24 | Columne3AtmNetworkProfile-SparePhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.25 | Columne3AtmNetworkProfile-SparePhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.26 | Columne3AtmNetworkProfile-SparingMode | read-write | mandatory | Trunk port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.15.1.1.27 | Columne3AtmNetworkProfile-IgnoreLineup | read-write | mandatory | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.15.1.1.28 | Columne3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable | read-write | mandatory | When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No. |
| 1.3.6.1.4.1.529.23.15.2 | Tablemibe3AtmNetworkProfile-LineConfig-TrafficShapersTable | not-accessible | mandatory | A list of mibe3AtmNetworkProfile__line_config__traffic_shapers profile entries. |
| 1.3.6.1.4.1.529.23.15.2.1 | Rowmibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry | not-accessible | mandatory | A mibe3AtmNetworkProfile__line_config__traffic_shapers entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__traffic_sha… |
| 1.3.6.1.4.1.529.23.15.2.1.1 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.2.1.2 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.2.1.3 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.2.1.4 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.2.1.5 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled | read-write | mandatory | TRUE if the shaper is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.2.1.6 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate | read-write | mandatory | What is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface typ… |
| 1.3.6.1.4.1.529.23.15.2.1.7 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate | read-write | mandatory | What is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type. |
| 1.3.6.1.4.1.529.23.15.2.1.8 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize | read-write | mandatory | What is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper. |
| 1.3.6.1.4.1.529.23.15.2.1.9 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate | read-write | mandatory | If FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally. |
| 1.3.6.1.4.1.529.23.15.2.1.10 | Columne3AtmNetworkProfile-LineConfig-TrafficShapers-Priority | read-write | mandatory | A number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest. |
| 1.3.6.1.4.1.529.23.15.3 | Tablemibe3AtmNetworkProfile-LineConfig-IncomingVCCsTable | not-accessible | mandatory | A list of mibe3AtmNetworkProfile__line_config__incomingVCCs profile entries. |
| 1.3.6.1.4.1.529.23.15.3.1 | Rowmibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry | not-accessible | mandatory | A mibe3AtmNetworkProfile__line_config__incomingVCCs entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__incomingVCCs p… |
| 1.3.6.1.4.1.529.23.15.3.1.1 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.3.1.2 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.3.1.3 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.3.1.4 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.3.1.5 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled | read-write | mandatory | TRUE if the item is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.3.1.6 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi | read-write | mandatory | A number that identifies the Virtual Path Identifier of this item. |
| 1.3.6.1.4.1.529.23.15.3.1.7 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci | read-write | mandatory | A number that identifies the starting Virtual Channel Identifier of this item. |
| 1.3.6.1.4.1.529.23.15.3.1.8 | Columne3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci | read-write | mandatory | A number that identifies the ending Virtual Channel Identifier of this item. |
| 1.3.6.1.4.1.529.23.15.4 | Tablemibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiTable | not-accessible | mandatory | A list of mibe3AtmNetworkProfile__line_config__vc_switching_vpi profile entries. |
| 1.3.6.1.4.1.529.23.15.4.1 | Rowmibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry | not-accessible | mandatory | A mibe3AtmNetworkProfile__line_config__vc_switching_vpi entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__vc_switchi… |
| 1.3.6.1.4.1.529.23.15.4.1.1 | Columne3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.4.1.2 | Columne3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.4.1.3 | Columne3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.4.1.4 | Columne3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.15.4.1.5 | Columne3AtmNetworkProfile-LineConfig-VcSwitchingVpi | read-write | mandatory | VPI(s) to be used for the VC switching (VCC). It should always contain VPI 0 for VC switching. All VC switching VPI have similar valid VCI range which is deter… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |