ASCEND-MIBETHER-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.76 | NodemibethernetInterfaceProfile | |||
| 1.3.6.1.4.1.529.23.76.1 | TablemibethernetInterfaceProfileTable | not-accessible | mandatory | A list of mibethernetInterfaceProfile profile entries. |
| 1.3.6.1.4.1.529.23.76.1.1 | RowmibethernetInterfaceProfileEntry | not-accessible | mandatory | A mibethernetInterfaceProfile entry containing objects that maps to the parameters of mibethernetInterfaceProfile profile. |
| 1.3.6.1.4.1.529.23.76.1.1.1 | ColumnethernetInterfaceProfile-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.76.1.1.2 | ColumnethernetInterfaceProfile-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.76.1.1.3 | ColumnethernetInterfaceProfile-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.76.1.1.4 | ColumnethernetInterfaceProfile-InterfaceAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.76.1.1.5 | ColumnethernetInterfaceProfile-InterfaceAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.76.1.1.6 | ColumnethernetInterfaceProfile-InterfaceAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.76.1.1.7 | ColumnethernetInterfaceProfile-LinkStateEnabled | read-write | mandatory | TRUE if the link state is honored, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.76.1.1.8 | ColumnethernetInterfaceProfile-Enabled | read-write | mandatory | TRUE if the interface is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.76.1.1.9 | ColumnethernetInterfaceProfile-EtherIfType | read-only | mandatory | The type of phyical interrface, UTP, COAX, AUI |
| 1.3.6.1.4.1.529.23.76.1.1.10 | ColumnethernetInterfaceProfile-Filter | read-write | mandatory | This field is for non-tnt only |
| 1.3.6.1.4.1.529.23.76.1.1.11 | ColumnethernetInterfaceProfile-BridgingEnabled | read-write | mandatory | TRUE if this interface is to support bridging. |
| 1.3.6.1.4.1.529.23.76.1.1.12 | ColumnethernetInterfaceProfile-FilterName | read-write | mandatory | The name of this filter. All filters are referenced by name so a name must be assigned to active filters. |
| 1.3.6.1.4.1.529.23.76.1.1.13 | ColumnethernetInterfaceProfile-DuplexMode | read-write | mandatory | Set the 100BaseT physical interface to full or half duplex mode. Only valid for the 100BaseT port. |
| 1.3.6.1.4.1.529.23.76.1.1.14 | ColumnethernetInterfaceProfile-PppoeOptions-Pppoe | read-write | mandatory | Enable or disable the ability to establish PPP over Ethernet session over this interface. |
| 1.3.6.1.4.1.529.23.76.1.1.15 | ColumnethernetInterfaceProfile-PppoeOptions-BridgeNonPppoe | read-write | mandatory | States wheather to bridge all other protocols except PPPoE on this interface or not. |
| 1.3.6.1.4.1.529.23.76.1.1.16 | ColumnethernetInterfaceProfile-BridgingOptions-BridgingGroup | read-write | mandatory | Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces belonging to the same group. |
| 1.3.6.1.4.1.529.23.76.1.1.17 | ColumnethernetInterfaceProfile-BridgingOptions-DialOnBroadcast | read-write | mandatory | Enable/disable outdial when broadcast frames are received. |
| 1.3.6.1.4.1.529.23.76.1.1.18 | ColumnethernetInterfaceProfile-BridgingOptions-IpxSpoofing | read-write | mandatory | Selects the IPX spoofing mode when bridging. |
| 1.3.6.1.4.1.529.23.76.1.1.19 | ColumnethernetInterfaceProfile-BridgingOptions-SpoofingTimeout | read-write | mandatory | IPX NetWare connection timeout value. |
| 1.3.6.1.4.1.529.23.76.1.1.20 | ColumnethernetInterfaceProfile-BridgingOptions-Fill2 | read-only | mandatory | filler to get to 32 bit boundary |
| 1.3.6.1.4.1.529.23.76.1.1.21 | ColumnethernetInterfaceProfile-BridgingOptions-BridgeType | read-write | mandatory | For the P25 user interface. |
| 1.3.6.1.4.1.529.23.76.1.1.22 | ColumnethernetInterfaceProfile-BridgingOptions-Egress | read-write | mandatory | Enable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network. |
| 1.3.6.1.4.1.529.23.76.1.1.23 | ColumnethernetInterfaceProfile-MediaSpeedMbit | read-write | mandatory | Set the BaseT physical interface media speed to 100mb or 10mb. Only valid for the BaseT port on an ether3-card. |
| 1.3.6.1.4.1.529.23.76.1.1.24 | ColumnethernetInterfaceProfile-AutoNegotiate | read-write | mandatory | Set the auto-negotiation option. Only valid for enet3nd-card. |
| 1.3.6.1.4.1.529.23.76.1.1.25 | ColumnethernetInterfaceProfile-Action-o | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |