ASCEND-MIBHDSL2-MIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.159 | Nodemibhdsl2DslLineStatus | |||
| 1.3.6.1.4.1.529.23.159.1 | Tablemibhdsl2DslLineStatusTable | not-accessible | mandatory | A list of mibhdsl2DslLineStatus profile entries. |
| 1.3.6.1.4.1.529.23.159.1.1 | Rowmibhdsl2DslLineStatusEntry | not-accessible | mandatory | A mibhdsl2DslLineStatus entry containing objects that maps to the parameters of mibhdsl2DslLineStatus profile. |
| 1.3.6.1.4.1.529.23.159.1.1.1 | Columnhdsl2DslLineStatus-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.159.1.1.2 | Columnhdsl2DslLineStatus-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.159.1.1.3 | Columnhdsl2DslLineStatus-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.159.1.1.4 | Columnhdsl2DslLineStatus-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.159.1.1.5 | Columnhdsl2DslLineStatus-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.159.1.1.6 | Columnhdsl2DslLineStatus-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.159.1.1.7 | Columnhdsl2DslLineStatus-LineState | read-only | mandatory | The overall state of the line. |
| 1.3.6.1.4.1.529.23.159.1.1.8 | Columnhdsl2DslLineStatus-SparePhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.159.1.1.9 | Columnhdsl2DslLineStatus-SparePhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.159.1.1.10 | Columnhdsl2DslLineStatus-SparePhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.159.1.1.11 | Columnhdsl2DslLineStatus-SparingState | read-only | mandatory | The sparing state of the line. |
| 1.3.6.1.4.1.529.23.159.1.1.12 | Columnhdsl2DslLineStatus-SparingChangeReason | read-only | mandatory | The reason for the last sparing state change. |
| 1.3.6.1.4.1.529.23.159.1.1.13 | Columnhdsl2DslLineStatus-SparingChangeTime | read-only | mandatory | The time of the last sparing state change. |
| 1.3.6.1.4.1.529.23.159.1.1.14 | Columnhdsl2DslLineStatus-SparingChangeCounter | read-only | mandatory | The number of sparing state changes. |
| 1.3.6.1.4.1.529.23.159.1.1.15 | Columnhdsl2DslLineStatus-VpiVciRange | read-only | mandatory | The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. |
| 1.3.6.1.4.1.529.23.159.1.1.16 | Columnhdsl2DslLineStatus-VpSwitchingVpi | read-only | mandatory | VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching. |
| 1.3.6.1.4.1.529.23.159.1.1.17 | Columnhdsl2DslLineStatus-PhysicalStatus-IfGroupIndex | read-only | mandatory | Interface groups index assigned to this physical port. |
| 1.3.6.1.4.1.529.23.159.1.1.18 | Columnhdsl2DslLineStatus-PhysicalStatus-UnitType | read-only | mandatory | Unit types defines if the node is operating Central Office or Customer Premise equipment software. |
| 1.3.6.1.4.1.529.23.159.1.1.19 | Columnhdsl2DslLineStatus-PhysicalStatus-InterfaceType | read-only | mandatory | Interface type defines if the node is operating on HDSL2 or GSHDSL |
| 1.3.6.1.4.1.529.23.159.1.1.20 | Columnhdsl2DslLineStatus-PhysicalStatus-DevLineState | read-only | mandatory | Display of current interface state. |
| 1.3.6.1.4.1.529.23.159.1.1.21 | Columnhdsl2DslLineStatus-PhysicalStatus-OperationalRate | read-only | mandatory | Operational up and down stream rate. Zero means unknown. |
| 1.3.6.1.4.1.529.23.159.1.1.22 | Columnhdsl2DslLineStatus-PhysicalStatus-FirmwareVer | read-only | mandatory | Firmware version ID. |
| 1.3.6.1.4.1.529.23.159.1.1.23 | Columnhdsl2DslLineStatus-PhysicalStatus-HardwareVer | read-only | mandatory | Hardware chip version. |
| 1.3.6.1.4.1.529.23.159.1.1.24 | Columnhdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Days | read-only | mandatory | Number of days that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.159.1.1.25 | Columnhdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Hours | read-only | mandatory | Number of hours that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.159.1.1.26 | Columnhdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | read-only | mandatory | Number of minutes that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.159.1.1.27 | Columnhdsl2DslLineStatus-PhysicalStatistic-RxSignalPresent | read-only | mandatory | State if the receive signal is present or not. |
| 1.3.6.1.4.1.529.23.159.1.1.28 | Columnhdsl2DslLineStatus-PhysicalStatistic-LineQuality | read-only | mandatory | While the port is in the up state, this parameter displays the line quality. |
| 1.3.6.1.4.1.529.23.159.1.1.29 | Columnhdsl2DslLineStatus-PhysicalStatistic-UpDwnCntr | read-only | mandatory | Interface Up Down counter value displays the number of times the interface trasitions from a down to up state. |
| 1.3.6.1.4.1.529.23.159.1.1.30 | Columnhdsl2DslLineStatus-PhysicalStatistic-SelfTest | read-only | mandatory | Hardware/firmware self test results. |
| 1.3.6.1.4.1.529.23.159.1.1.31 | Columnhdsl2DslLineStatus-PhysicalStatistic-TransmitPower | read-only | mandatory | Transmit power in DB. |
| 1.3.6.1.4.1.529.23.159.1.1.32 | Columnhdsl2DslLineStatus-PhysicalStatistic-FramerSyncStatus | read-only | mandatory | Framer sync status |
| 1.3.6.1.4.1.529.23.159.1.1.33 | Columnhdsl2DslLineStatus-PhysicalStatistic-CodeViolations | read-only | mandatory | Line is defined as a count of HDSL2 CRC anomalies occuring during the accumuation period. |
| 1.3.6.1.4.1.529.23.159.1.1.34 | Columnhdsl2DslLineStatus-PhysicalStatistic-ErroredSecond | read-only | mandatory | Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.159.1.1.35 | Columnhdsl2DslLineStatus-PhysicalStatistic-SeverelyErroredSecond | read-only | mandatory | Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.159.1.1.36 | Columnhdsl2DslLineStatus-PhysicalStatistic-LoswSecond | read-only | mandatory | Line is defined as a count of 1 second intervals during which one or more HDSL2 LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.159.1.1.37 | Columnhdsl2DslLineStatus-PhysicalStatistic-UnavailableSecond | read-only | mandatory | Line is a count of 1 second intervals for which the HDSL2 line is unavailable. The HDSL2 line becomes unavailable at the onset of 10 contiguous SES-L's. Once u… |
| 1.3.6.1.4.1.529.23.159.1.1.38 | Columnhdsl2DslLineStatus-PhysicalStatistic-LoopAttenuation | read-only | mandatory | Current loop attenuation in DB. |
| 1.3.6.1.4.1.529.23.159.1.1.39 | Columnhdsl2DslLineStatus-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.159.1.1.40 | Columnhdsl2DslLineStatus-PhysicalStatistic-Snr | read-only | mandatory | While the port is in the up state, this parameter displays the Signal to Noise Ratio. |
| 1.3.6.1.4.1.529.23.159.1.1.41 | Columnhdsl2DslLineStatus-PhysicalStatistic-SturLoopAttenuation | read-only | mandatory | Current loop attenuation in DB from the STU-R. |
| 1.3.6.1.4.1.529.23.159.1.1.42 | Columnhdsl2DslLineStatus-PhysicalStatistic-SturSnr | read-only | mandatory | While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R. |
| 1.3.6.1.4.1.529.23.159.1.1.43 | Columnhdsl2DslLineStatus-PhysicalStatus-NetworkType | read-only | mandatory | Current Standard Network type. Either Annex A, Annex B or Annex B ANFP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |