ASCEND-MIBSHDSLNET-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.147 | NodemibshdslNetworkProfile | |||
| 1.3.6.1.4.1.529.23.147.1 | TablemibshdslNetworkProfileTable | not-accessible | mandatory | A list of mibshdslNetworkProfile profile entries. |
| 1.3.6.1.4.1.529.23.147.1.1 | RowmibshdslNetworkProfileEntry | not-accessible | mandatory | A mibshdslNetworkProfile entry containing objects that maps to the parameters of mibshdslNetworkProfile profile. |
| 1.3.6.1.4.1.529.23.147.1.1.1 | ColumnshdslNetworkProfile-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.2 | ColumnshdslNetworkProfile-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.3 | ColumnshdslNetworkProfile-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.4 | ColumnshdslNetworkProfile-Name | read-write | mandatory | For future use. The current design does not use the name field but instead references Shdsl lines by the physical address; we may in the future support referen… |
| 1.3.6.1.4.1.529.23.147.1.1.5 | ColumnshdslNetworkProfile-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.6 | ColumnshdslNetworkProfile-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.7 | ColumnshdslNetworkProfile-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.147.1.1.8 | ColumnshdslNetworkProfile-Enabled | read-write | mandatory | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.147.1.1.9 | ColumnshdslNetworkProfile-SparingMode | read-write | mandatory | Port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.147.1.1.10 | ColumnshdslNetworkProfile-IgnoreLineup | read-write | mandatory | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.147.1.1.11 | ColumnshdslNetworkProfile-ProfileNumber | read-write | mandatory | For potential backwards compatibility. The current design consists of one line profile numbered 0. |
| 1.3.6.1.4.1.529.23.147.1.1.12 | ColumnshdslNetworkProfile-LineConfig-TrunkGroup | read-write | mandatory | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.147.1.1.13 | ColumnshdslNetworkProfile-LineConfig-NailedGroup | read-write | mandatory | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.147.1.1.14 | ColumnshdslNetworkProfile-LineConfig-VpSwitchingVpi | read-write | mandatory | The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effec… |
| 1.3.6.1.4.1.529.23.147.1.1.15 | ColumnshdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.16 | ColumnshdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber | read-write | mandatory | TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed w… |
| 1.3.6.1.4.1.529.23.147.1.1.17 | ColumnshdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.18 | ColumnshdslNetworkProfile-LineConfig-Activation | read-write | mandatory | Line activation mode. |
| 1.3.6.1.4.1.529.23.147.1.1.19 | ColumnshdslNetworkProfile-LineConfig-CallRouteInfo-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.20 | ColumnshdslNetworkProfile-LineConfig-CallRouteInfo-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.21 | ColumnshdslNetworkProfile-LineConfig-CallRouteInfo-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.147.1.1.22 | ColumnshdslNetworkProfile-LineConfig-UnitType | read-write | mandatory | The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the remote unit needs to be configure… |
| 1.3.6.1.4.1.529.23.147.1.1.23 | ColumnshdslNetworkProfile-LineConfig-NtrEnabled | read-write | mandatory | TRUE if NTR functionality is enabled, otherwise FALSE. If the unit-type is COE, it will take the system clock as the input when NTR is enabled and allow the re… |
| 1.3.6.1.4.1.529.23.147.1.1.24 | ColumnshdslNetworkProfile-LineConfig-ClockSource | read-write | mandatory | Determine whether the 8KHz clock from the SHDSL line (unit-type has to be CPE and ntr-enabled has to be yes) is eligible to be used as the 8KHz system clock so… |
| 1.3.6.1.4.1.529.23.147.1.1.25 | ColumnshdslNetworkProfile-LineConfig-ClockPriority | read-write | mandatory | Clock priority assigned to the SHDSL line. Used to select a particular SHDSL line as the 8KHz system clock source. |
| 1.3.6.1.4.1.529.23.147.1.1.26 | ColumnshdslNetworkProfile-LineConfig-LoopBack | read-write | mandatory | Configuration of different modem loopbacks. |
| 1.3.6.1.4.1.529.23.147.1.1.27 | ColumnshdslNetworkProfile-LineConfig-Margin | read-write | mandatory | Selects a margin range between the signal to noise floor. |
| 1.3.6.1.4.1.529.23.147.1.1.28 | ColumnshdslNetworkProfile-LineConfig-RateMode | read-write | mandatory | Used for G.SHDSL technology. Selects if the modem operates in Fixed or Auto rate mode. |
| 1.3.6.1.4.1.529.23.147.1.1.29 | ColumnshdslNetworkProfile-LineConfig-MinRate | read-write | mandatory | Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the minimum rate the modem will train to. |
| 1.3.6.1.4.1.529.23.147.1.1.30 | ColumnshdslNetworkProfile-LineConfig-MaxRate | read-write | mandatory | Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the maximum rate the modem will train to. When the rate-mode is set to Fixed, this is t… |
| 1.3.6.1.4.1.529.23.147.1.1.31 | ColumnshdslNetworkProfile-LineConfig-GshdslStandardNetworkType | read-write | mandatory | Per the G.SHDSL Standard G.991.2. This parameter allows selection for the modem to operate either the North American Annex 'A' or European Annex 'B' standard n… |
| 1.3.6.1.4.1.529.23.147.1.1.32 | ColumnshdslNetworkProfile-LineConfig-GshdslPsdType | read-write | mandatory | Per the G.SHDSL Standard G.911.2. This parameter allows selection for the modem to output a symmetric PSD at all rates or asymmetric PSD's at fixed rates of 77… |
| 1.3.6.1.4.1.529.23.147.1.1.33 | ColumnshdslNetworkProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.147.1.1.34 | ColumnshdslNetworkProfile-LineConfig-SnextMargin | read-write | mandatory | Selects a Snext margin range with a worst-case self next noise model given current loop insertion loss. |
| 1.3.6.1.4.1.529.23.147.1.1.35 | ColumnshdslNetworkProfile-LineConfig-AnnexbAnfpEnabled | read-write | mandatory | TRUE if Annex B ANFP functionality is enabled, otherwise FALSE. The gshdsl-standard-network-type must be set to European Annex B, and the port cannot be CPE. T… |
| 1.3.6.1.4.1.529.23.147.1.1.36 | ColumnshdslNetworkProfile-LineConfig-MasterBindingPort | read-write | mandatory | This parameter defines if a port is used as a master or slave for port binding purposes. Only odd ports are configured masters for the binding feature. When th… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |