ASCEND-MIBSHDSLSTAT-MIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.157 | NodemibshdslDslLineStatus | |||
| 1.3.6.1.4.1.529.23.157.1 | TablemibshdslDslLineStatusTable | not-accessible | mandatory | A list of mibshdslDslLineStatus profile entries. |
| 1.3.6.1.4.1.529.23.157.1.1 | RowmibshdslDslLineStatusEntry | not-accessible | mandatory | A mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile. |
| 1.3.6.1.4.1.529.23.157.1.1.1 | ColumnshdslDslLineStatus-Shelf-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.157.1.1.2 | ColumnshdslDslLineStatus-Slot-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.157.1.1.3 | ColumnshdslDslLineStatus-Item-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.157.1.1.4 | ColumnshdslDslLineStatus-PhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.157.1.1.5 | ColumnshdslDslLineStatus-PhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.157.1.1.6 | ColumnshdslDslLineStatus-PhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.157.1.1.7 | ColumnshdslDslLineStatus-LineState | read-only | mandatory | The overall state of the line. |
| 1.3.6.1.4.1.529.23.157.1.1.8 | ColumnshdslDslLineStatus-SparePhysicalAddress-Shelf | read-write | mandatory | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.157.1.1.9 | ColumnshdslDslLineStatus-SparePhysicalAddress-Slot | read-write | mandatory | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.157.1.1.10 | ColumnshdslDslLineStatus-SparePhysicalAddress-ItemNumber | read-write | mandatory | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.157.1.1.11 | ColumnshdslDslLineStatus-SparingState | read-only | mandatory | The sparing state of the line. |
| 1.3.6.1.4.1.529.23.157.1.1.12 | ColumnshdslDslLineStatus-SparingChangeReason | read-only | mandatory | The reson for the last sparing state change. |
| 1.3.6.1.4.1.529.23.157.1.1.13 | ColumnshdslDslLineStatus-SparingChangeTime | read-only | mandatory | The time of the last sparing state change. |
| 1.3.6.1.4.1.529.23.157.1.1.14 | ColumnshdslDslLineStatus-SparingChangeCounter | read-only | mandatory | The number of sparing state changes. |
| 1.3.6.1.4.1.529.23.157.1.1.15 | ColumnshdslDslLineStatus-VpiVciRange | read-only | mandatory | The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. |
| 1.3.6.1.4.1.529.23.157.1.1.16 | ColumnshdslDslLineStatus-VpSwitchingVpi | read-only | mandatory | VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching. |
| 1.3.6.1.4.1.529.23.157.1.1.17 | ColumnshdslDslLineStatus-PhysicalStatus-IfGroupIndex | read-only | mandatory | Interface groups index assigned to this physical port. |
| 1.3.6.1.4.1.529.23.157.1.1.18 | ColumnshdslDslLineStatus-PhysicalStatus-UnitType | read-only | mandatory | Unit types defines if the node is operating Central Office or Customer Premise equipment software. |
| 1.3.6.1.4.1.529.23.157.1.1.19 | ColumnshdslDslLineStatus-PhysicalStatus-InterfaceType | read-only | mandatory | Interface type defines if the node is operating on SHDSL or GSHDSL |
| 1.3.6.1.4.1.529.23.157.1.1.20 | ColumnshdslDslLineStatus-PhysicalStatus-DevLineState | read-only | mandatory | Display of current interface state. |
| 1.3.6.1.4.1.529.23.157.1.1.21 | ColumnshdslDslLineStatus-PhysicalStatus-OperationalRate | read-only | mandatory | Operational up and down stream rate. Zero means unknown. |
| 1.3.6.1.4.1.529.23.157.1.1.22 | ColumnshdslDslLineStatus-PhysicalStatus-FirmwareVer | read-only | mandatory | Firmware version ID. |
| 1.3.6.1.4.1.529.23.157.1.1.23 | ColumnshdslDslLineStatus-PhysicalStatus-HardwareVer | read-only | mandatory | Hardware chip version. |
| 1.3.6.1.4.1.529.23.157.1.1.24 | ColumnshdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days | read-only | mandatory | Number of days that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.157.1.1.25 | ColumnshdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours | read-only | mandatory | Number of hours that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.157.1.1.26 | ColumnshdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | read-only | mandatory | Number of minutes that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.157.1.1.27 | ColumnshdslDslLineStatus-PhysicalStatistic-RxSignalPresent | read-only | mandatory | State if the receive signal is present or not. |
| 1.3.6.1.4.1.529.23.157.1.1.28 | ColumnshdslDslLineStatus-PhysicalStatistic-LineQuality | read-only | mandatory | While the port is in the up state, this parameter displays the line quality. |
| 1.3.6.1.4.1.529.23.157.1.1.29 | ColumnshdslDslLineStatus-PhysicalStatistic-UpDwnCntr | read-only | mandatory | Interface Up Down counter value displays the number of times the interface trasitions from a down to up state. |
| 1.3.6.1.4.1.529.23.157.1.1.30 | ColumnshdslDslLineStatus-PhysicalStatistic-SelfTest | read-only | mandatory | Hardware/firmware self test results. |
| 1.3.6.1.4.1.529.23.157.1.1.31 | ColumnshdslDslLineStatus-PhysicalStatistic-TransmitPower | read-only | mandatory | Transmit power in DB. |
| 1.3.6.1.4.1.529.23.157.1.1.32 | ColumnshdslDslLineStatus-PhysicalStatistic-FramerSyncStatus | read-only | mandatory | Framer sync status |
| 1.3.6.1.4.1.529.23.157.1.1.33 | ColumnshdslDslLineStatus-PhysicalStatistic-CodeViolations | read-only | mandatory | Line is defined as a count of SHDSL CRC anomalies occuring during the accumuation period. |
| 1.3.6.1.4.1.529.23.157.1.1.34 | ColumnshdslDslLineStatus-PhysicalStatistic-ErroredSecond | read-only | mandatory | Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.157.1.1.35 | ColumnshdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond | read-only | mandatory | Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.157.1.1.36 | ColumnshdslDslLineStatus-PhysicalStatistic-LoswSecond | read-only | mandatory | Line is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared. |
| 1.3.6.1.4.1.529.23.157.1.1.37 | ColumnshdslDslLineStatus-PhysicalStatistic-UnavailableSecond | read-only | mandatory | Line is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once u… |
| 1.3.6.1.4.1.529.23.157.1.1.38 | ColumnshdslDslLineStatus-PhysicalStatistic-LoopAttenuation | read-only | mandatory | Current loop attenuation in DB. |
| 1.3.6.1.4.1.529.23.157.1.1.39 | ColumnshdslDslLineStatus-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.157.1.1.40 | ColumnshdslDslLineStatus-PhysicalStatistic-Snr | read-only | mandatory | While the port is in the up state, this parameter displays the Signal to Noise Ratio. |
| 1.3.6.1.4.1.529.23.157.1.1.41 | ColumnshdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation | read-only | mandatory | Current loop attenuation in DB from the STU-R. |
| 1.3.6.1.4.1.529.23.157.1.1.42 | ColumnshdslDslLineStatus-PhysicalStatistic-SturSnr | read-only | mandatory | While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R. |
| 1.3.6.1.4.1.529.23.157.1.1.43 | ColumnshdslDslLineStatus-PhysicalStatus-NetworkType | read-only | mandatory | Current Standard Network type. Either Annex A, Annex B or Annex B ANFP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |