ASCEND-MIBSNMP-MIB
59 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.114 | NodemibsnmpProfile | |||
| 1.3.6.1.4.1.529.23.114.1 | TablemibsnmpProfileTable | not-accessible | mandatory | A list of mibsnmpProfile profile entries. |
| 1.3.6.1.4.1.529.23.114.1.1 | RowmibsnmpProfileEntry | not-accessible | mandatory | A mibsnmpProfile entry containing objects that maps to the parameters of mibsnmpProfile profile. |
| 1.3.6.1.4.1.529.23.114.1.1.1 | ColumnsnmpProfile-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.114.1.1.2 | ColumnsnmpProfile-Enabled | read-write | mandatory | When set to `no' (its default value), the unit cannot be accessed via SNMP. |
| 1.3.6.1.4.1.529.23.114.1.1.3 | ColumnsnmpProfile-ReadCommunity | read-write | mandatory | The SNMP community name for read access. |
| 1.3.6.1.4.1.529.23.114.1.1.4 | ColumnsnmpProfile-ReadWriteEnabled | read-write | mandatory | When set to `no' (its default value), the write community cannot be accessed via SNMP. |
| 1.3.6.1.4.1.529.23.114.1.1.5 | ColumnsnmpProfile-ReadWriteCommunity | read-write | mandatory | The SNMP community name for read/write access. |
| 1.3.6.1.4.1.529.23.114.1.1.6 | ColumnsnmpProfile-EnforceAddressSecurity | read-write | mandatory | When set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `yes', we will check the source IP … |
| 1.3.6.1.4.1.529.23.114.1.1.7 | ColumnsnmpProfile-Contact | read-write | mandatory | The name of the contact for this device. SNMP readable and settable. |
| 1.3.6.1.4.1.529.23.114.1.1.8 | ColumnsnmpProfile-Location | read-write | mandatory | The location of this device. SNMP readable and settable. |
| 1.3.6.1.4.1.529.23.114.1.1.9 | ColumnsnmpProfile-QueueDepth | read-write | mandatory | The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus … |
| 1.3.6.1.4.1.529.23.114.1.1.10 | ColumnsnmpProfile-CsmModemDiag | read-write | mandatory | When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature. |
| 1.3.6.1.4.1.529.23.114.1.1.11 | ColumnsnmpProfile-SnmpMessageType | read-write | mandatory | Indicate the message type that the SNMP agent should handle. |
| 1.3.6.1.4.1.529.23.114.1.1.12 | ColumnsnmpProfile-SecurityLevel | read-write | mandatory | Indicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabled |
| 1.3.6.1.4.1.529.23.114.1.1.13 | ColumnsnmpProfile-EnableVacm | read-write | mandatory | If set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled. |
| 1.3.6.1.4.1.529.23.114.1.1.14 | ColumnsnmpProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.114.1.1.15 | ColumnsnmpProfile-NotificationLogAgeOut | read-write | mandatory | The number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out. |
| 1.3.6.1.4.1.529.23.114.1.1.16 | ColumnsnmpProfile-EarlyQueueDiscard | read-write | mandatory | If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the SNMP UDP port 161. If this parame… |
| 1.3.6.1.4.1.529.23.114.1.1.17 | ColumnsnmpProfile-BitStringsAllowed | read-write | mandatory | If enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format. |
| 1.3.6.1.4.1.529.23.114.1.1.18 | ColumnsnmpProfile-AlarmClearTableLimit | read-write | mandatory | The maximum number of alarmCleared entries that can be held in the alarmCleared table. |
| 1.3.6.1.4.1.529.23.115 | NodemibusmUserProfile | |||
| 1.3.6.1.4.1.529.23.115.1 | TablemibusmUserProfileTable | not-accessible | mandatory | A list of mibusmUserProfile profile entries. |
| 1.3.6.1.4.1.529.23.115.1.1 | RowmibusmUserProfileEntry | not-accessible | mandatory | A mibusmUserProfile entry containing objects that maps to the parameters of mibusmUserProfile profile. |
| 1.3.6.1.4.1.529.23.115.1.1.1 | ColumnusmUserProfile-Name | read-only | mandatory | The user (principal) on whose behalf the message is being exchange. |
| 1.3.6.1.4.1.529.23.115.1.1.2 | ColumnusmUserProfile-ActiveEnabled | read-write | mandatory | TRUE if this user is enabled for message exchange. |
| 1.3.6.1.4.1.529.23.115.1.1.3 | ColumnusmUserProfile-ReadWriteAccess | read-write | mandatory | TRUE if this user is configured for read-write access to MIB view. |
| 1.3.6.1.4.1.529.23.115.1.1.4 | ColumnusmUserProfile-AuthProtocol | read-write | mandatory | Indicate whether messages sent on behalf of this user to/from the SNMP engine can be authenticated and,if so, the type of authentication protocol to be used. |
| 1.3.6.1.4.1.529.23.115.1.1.5 | ColumnusmUserProfile-PrivProtocol | read-write | mandatory | Indicate whether messages sent on behalf of this user to/from the SNMP engine can be protected by encryption and,if so, the type of privacy protocol to be used. |
| 1.3.6.1.4.1.529.23.115.1.1.6 | ColumnusmUserProfile-AuthKey | read-write | mandatory | The user's authkey: calculated based on password and auth protocol. This can be set using snmpAuthPass command |
| 1.3.6.1.4.1.529.23.115.1.1.7 | ColumnusmUserProfile-PrivKey | read-write | mandatory | The user's privacy: key calculated based on priv-password and auth protocol. This can be set using snmpPrivPass command |
| 1.3.6.1.4.1.529.23.115.1.1.8 | ColumnusmUserProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.116 | Nodemibsnmpv3TargetParamProfile | |||
| 1.3.6.1.4.1.529.23.116.1 | Tablemibsnmpv3TargetParamProfileTable | not-accessible | mandatory | A list of mibsnmpv3TargetParamProfile profile entries. |
| 1.3.6.1.4.1.529.23.116.1.1 | Rowmibsnmpv3TargetParamProfileEntry | not-accessible | mandatory | A mibsnmpv3TargetParamProfile entry containing objects that maps to the parameters of mibsnmpv3TargetParamProfile profile. |
| 1.3.6.1.4.1.529.23.116.1.1.1 | Columnsnmpv3TargetParamProfile-Name | read-only | mandatory | Any arbitrary, but unique identifier associated with this profile |
| 1.3.6.1.4.1.529.23.116.1.1.2 | Columnsnmpv3TargetParamProfile-ActiveEnabled | read-write | mandatory | TRUE if this profile is enabled for generation of SNMP messages |
| 1.3.6.1.4.1.529.23.116.1.1.3 | Columnsnmpv3TargetParamProfile-MsgProcModel | read-write | mandatory | Message processing model used when generating SNMP messages using this entry |
| 1.3.6.1.4.1.529.23.116.1.1.4 | Columnsnmpv3TargetParamProfile-SecurityModel | read-write | mandatory | Security model to be used when generating SNMP messages using this entry |
| 1.3.6.1.4.1.529.23.116.1.1.5 | Columnsnmpv3TargetParamProfile-SecurityName | read-write | mandatory | Security name which identifies the principal on whose behalf SNMP messages will be generated using this entry. This name should be a valid snmpv3-usm-user |
| 1.3.6.1.4.1.529.23.116.1.1.6 | Columnsnmpv3TargetParamProfile-SecurityLevel | read-write | mandatory | Level of security to be used when generating messages using this entry. |
| 1.3.6.1.4.1.529.23.116.1.1.7 | Columnsnmpv3TargetParamProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.117 | Nodemibsnmpv3NotifyProfile | |||
| 1.3.6.1.4.1.529.23.117.1 | Tablemibsnmpv3NotifyProfileTable | not-accessible | mandatory | A list of mibsnmpv3NotifyProfile profile entries. |
| 1.3.6.1.4.1.529.23.117.1.1 | Rowmibsnmpv3NotifyProfileEntry | not-accessible | mandatory | A mibsnmpv3NotifyProfile entry containing objects that maps to the parameters of mibsnmpv3NotifyProfile profile. |
| 1.3.6.1.4.1.529.23.117.1.1.1 | Columnsnmpv3NotifyProfile-Name | read-only | mandatory | Any arbitrary, but unique identifier associated with this profile |
| 1.3.6.1.4.1.529.23.117.1.1.2 | Columnsnmpv3NotifyProfile-ActiveEnabled | read-write | mandatory | TRUE if this profile is enabled for generation of SNMP messages |
| 1.3.6.1.4.1.529.23.117.1.1.3 | Columnsnmpv3NotifyProfile-Tag | read-write | mandatory | Single tag value that is used to select entries in the snmpTargetAddrTable ( 'trap' profile). If this contains a string of zero length, no entries are selected. |
| 1.3.6.1.4.1.529.23.117.1.1.4 | Columnsnmpv3NotifyProfile-Type | read-only | mandatory | Type of notification to be generated, i.e., Trap (unconfirmed class) or Inform (confirmed class). This field is for future use. Agent does not generate INFORM … |
| 1.3.6.1.4.1.529.23.117.1.1.5 | Columnsnmpv3NotifyProfile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.118 | NodemibsnmpManagerProfile | |||
| 1.3.6.1.4.1.529.23.118.1 | TablemibsnmpManagerProfileTable | not-accessible | mandatory | A list of mibsnmpManagerProfile profile entries. |
| 1.3.6.1.4.1.529.23.118.1.1 | RowmibsnmpManagerProfileEntry | not-accessible | mandatory | A mibsnmpManagerProfile entry containing objects that maps to the parameters of mibsnmpManagerProfile profile. |
| 1.3.6.1.4.1.529.23.118.1.1.1 | ColumnsnmpManagerProfile-Name | read-only | mandatory | The name or the ip-address in dot format of the SNMP Manager (host) to send SNMP requests to the TAOS SNMP Agent. When DNS or YP/NIS is supported this name wil… |
| 1.3.6.1.4.1.529.23.118.1.1.2 | ColumnsnmpManagerProfile-Active | read-write | mandatory | TRUE if SNMP messages from a particular SNMP Manager should be processed. This implies read-access for SNMPv1. |
| 1.3.6.1.4.1.529.23.118.1.1.3 | ColumnsnmpManagerProfile-WriteAccess | read-write | mandatory | When set to `no' (its default value), the SNMP agent only allows read requests. When set to 'yes', the SNMP agent allows write requests in addition to read req… |
| 1.3.6.1.4.1.529.23.118.1.1.4 | ColumnsnmpManagerProfile-SnmpMessageType | read-write | mandatory | Indicate the message type that the SNMP agent should allow for this SNMP Manager. |
| 1.3.6.1.4.1.529.23.118.1.1.5 | ColumnsnmpManagerProfile-Action-o | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |