ASCEND-MIBSS7NMI-MIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.121 | NodemibsS7Profile | |||
| 1.3.6.1.4.1.529.23.121.1 | TablemibsS7ProfileTable | not-accessible | mandatory | A list of mibsS7Profile profile entries. |
| 1.3.6.1.4.1.529.23.121.1.1 | RowmibsS7ProfileEntry | not-accessible | mandatory | A mibsS7Profile entry containing objects that maps to the parameters of mibsS7Profile profile. |
| 1.3.6.1.4.1.529.23.121.1.1.1 | ColumnsS7Profile-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.121.1.1.2 | ColumnsS7Profile-Enabled | read-write | mandatory | When set to 'no', interface to the SS7 gateway is disabled. |
| 1.3.6.1.4.1.529.23.121.1.1.3 | ColumnsS7Profile-ControlProtocol | read-write | mandatory | Control protocol between the access server and the signaling gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.4 | ColumnsS7Profile-PrimaryIpAddress | read-write | mandatory | IP address of the primary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.5 | ColumnsS7Profile-PrimaryTcpPort | read-write | mandatory | TCP port on primary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.6 | ColumnsS7Profile-SecondaryIpAddress | read-write | mandatory | IP address of the secondary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.7 | ColumnsS7Profile-SecondaryTcpPort | read-write | mandatory | TCP port on the secondary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.8 | ColumnsS7Profile-BayId | read-write | mandatory | Bay ID defines the bay this device belongs to. Used for registration purposes only. The content of this field is reported to the gateway during the device regi… |
| 1.3.6.1.4.1.529.23.121.1.1.9 | ColumnsS7Profile-SystemType | read-write | mandatory | Model ID and/or type of equipment. Used for device registration only. Must be listed in the database on the Gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.10 | ColumnsS7Profile-TransportOptions-Type | read-write | mandatory | The type of transport layer that is to be used |
| 1.3.6.1.4.1.529.23.121.1.1.11 | ColumnsS7Profile-TransportOptions-DeviceId | read-write | mandatory | A code that uniquely identifies this device to the Gateway. If multiple remote access servers are configured to use the same signaling gateway, every one of th… |
| 1.3.6.1.4.1.529.23.121.1.1.12 | ColumnsS7Profile-TransportOptions-T1Duration | read-write | mandatory | Value of the ACK delay timer in milliseconds. This timer specifies the maximum delay for an acknowledgement when an I-frame is received. Default value is 1000 … |
| 1.3.6.1.4.1.529.23.121.1.1.13 | ColumnsS7Profile-TransportOptions-T2Duration | read-write | mandatory | Value of the transmission timeout timer in milliseconds. This timer specifies how long this endpoint should wait for an acknowledgement. Default value is 3000 … |
| 1.3.6.1.4.1.529.23.121.1.1.14 | ColumnsS7Profile-TransportOptions-T3Duration | read-write | mandatory | Value of the persistent error timer in milliseconds. This timer specifies the maximum duration of attempts to re-establish a link before the transport layer fl… |
| 1.3.6.1.4.1.529.23.121.1.1.15 | ColumnsS7Profile-TransportOptions-WindowSize | read-write | mandatory | Maximum number of sequentially numbered data packets that can be sent while pending acknowledgement at any given time. Default value is 7. |
| 1.3.6.1.4.1.529.23.121.1.1.16 | ColumnsS7Profile-TransportOptions-AckThreshold | read-write | mandatory | The threshold for triggering an acknowledgement while receiving data packets. As soon as the specified number of packets is received, an ACK is sent back regar… |
| 1.3.6.1.4.1.529.23.121.1.1.17 | ColumnsS7Profile-TransportOptions-HeartBeat | read-write | mandatory | When set to 'no', layer 2 heartbeat mechanism is not enabled. |
| 1.3.6.1.4.1.529.23.121.1.1.18 | ColumnsS7Profile-UseSystemIpAddressAsSource | read-write | mandatory | When set to 'yes', use configured System IP Address as source ip address. When set to 'no', use IP Address of outgoing interface as source ip address. |
| 1.3.6.1.4.1.529.23.121.1.1.19 | ColumnsS7Profile-CongestionControl-CongestionControlType | read-write | mandatory | Type of the congestion control algorithm to use. |
| 1.3.6.1.4.1.529.23.121.1.1.20 | ColumnsS7Profile-CongestionControl-Cl1Level | read-write | mandatory | The level at which 'congestion level 1' indication will be issued. The value is interpreted according to the configured congestion control 'type'. |
| 1.3.6.1.4.1.529.23.121.1.1.21 | ColumnsS7Profile-CongestionControl-Cl1Action | read-write | mandatory | Action taken when congestion level 1 (defined by the value of cl1-level) is reached. |
| 1.3.6.1.4.1.529.23.121.1.1.22 | ColumnsS7Profile-CongestionControl-Cl2Level | read-write | mandatory | The level at which 'congestion level 2' indication will be issued. The value is interpreted according to the configured congestion control 'type'. |
| 1.3.6.1.4.1.529.23.121.1.1.23 | ColumnsS7Profile-CongestionControl-Cl2Action | read-write | mandatory | Action taken when congestion level 2 (defined by the value of cl2-level) is reached. |
| 1.3.6.1.4.1.529.23.121.1.1.24 | ColumnsS7Profile-SignalingHeartbeat-Enabled | read-write | mandatory | When set to yes, TNT will generate signaling heartbeat to MGC based on the interval configured in signaling-heartbeat interval. |
| 1.3.6.1.4.1.529.23.121.1.1.25 | ColumnsS7Profile-SignalingHeartbeat-Interval | read-write | mandatory | The time interval in seconds for layer 3 heartbeat messages. |
| 1.3.6.1.4.1.529.23.121.1.1.26 | ColumnsS7Profile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.121.1.1.27 | ColumnsS7Profile-ResilienceOptions-Type | read-write | mandatory | The type of resilience action required when line state changes. |
| 1.3.6.1.4.1.529.23.121.1.1.28 | ColumnsS7Profile-ResilienceOptions-Duration | read-write | mandatory | The duration in milli seconds for which calls should be maintained when line state changes. Valid only if the type is configured as timed-release. |
| 1.3.6.1.4.1.529.23.121.1.1.29 | ColumnsS7Profile-PriTunnelingOptions-Enabled | read-write | mandatory | When set to yes, we will synchronize the d-channel status with the IPDC signaling link state. |
| 1.3.6.1.4.1.529.23.121.1.1.30 | ColumnsS7Profile-PriTunnelingOptions-Duration | read-write | mandatory | The duration in milliseconds after which bringing down D-channel of tunneled-pri-signaling lines will be initiated. |
| 1.3.6.1.4.1.529.23.121.1.1.32 | ColumnsS7Profile-IpdcSourceAdddress | read-write | mandatory | IP address to be used on the private network |
| 1.3.6.1.4.1.529.23.121.1.1.33 | ColumnsS7Profile-Vrouter | read-write | mandatory | Specifies the virtual router to be used. |
| 1.3.6.1.4.1.529.23.121.1.1.34 | ColumnsS7Profile-TransportOptions-Tos-Active | read-write | mandatory | Activate type of service for this connection. |
| 1.3.6.1.4.1.529.23.121.1.1.35 | ColumnsS7Profile-TransportOptions-Tos-Precedence | read-write | mandatory | Tag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.121.1.1.36 | ColumnsS7Profile-TransportOptions-Tos-TypeOfService | read-write | mandatory | Tag the type of service field in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.121.1.1.37 | ColumnsS7Profile-TransportOptions-Tos-ApplyTo | read-write | mandatory | Define how the type-of-service applies to data flow for this connection. |
| 1.3.6.1.4.1.529.23.121.1.1.38 | ColumnsS7Profile-TransportOptions-Tos-MarkingType | read-write | mandatory | Select type of packet marking. |
| 1.3.6.1.4.1.529.23.121.1.1.39 | ColumnsS7Profile-TransportOptions-Tos-Dscp | read-write | mandatory | DSCP tag to be used in marking of the packets (if marking-type = dscp). |
| 1.3.6.1.4.1.529.23.158 | NodemibpRITunlStatProfile | |||
| 1.3.6.1.4.1.529.23.158.1 | TablemibpRITunlStatProfileTable | not-accessible | mandatory | A list of mibpRITunlStatProfile profile entries. |
| 1.3.6.1.4.1.529.23.158.1.1 | RowmibpRITunlStatProfileEntry | not-accessible | mandatory | A mibpRITunlStatProfile entry containing objects that maps to the parameters of mibpRITunlStatProfile profile. |
| 1.3.6.1.4.1.529.23.158.1.1.1 | ColumnpRITunlStatProfile-Index-o | read-only | mandatory | |
| 1.3.6.1.4.1.529.23.158.1.1.2 | ColumnpRITunlStatProfile-Action-o | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |