ASCEND-MIBX25-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.140 | Nodemibx25Profile | |||
| 1.3.6.1.4.1.529.23.140.1 | Tablemibx25ProfileTable | not-accessible | mandatory | A list of mibx25Profile profile entries. |
| 1.3.6.1.4.1.529.23.140.1.1 | Rowmibx25ProfileEntry | not-accessible | mandatory | A mibx25Profile entry containing objects that maps to the parameters of mibx25Profile profile. |
| 1.3.6.1.4.1.529.23.140.1.1.1 | Columnx25Profile-X25Name | read-only | mandatory | Name of the X.25 profile. |
| 1.3.6.1.4.1.529.23.140.1.1.2 | Columnx25Profile-Active | read-write | mandatory | Indicates whether this profile is to be included in the X.25 table. |
| 1.3.6.1.4.1.529.23.140.1.1.3 | Columnx25Profile-Kludge | read-write | mandatory | This is a kludge to indicate that the physical line is to be brought down before connecting. It is also used for outsequence on a reset. This byte formally a f… |
| 1.3.6.1.4.1.529.23.140.1.1.4 | Columnx25Profile-NailedUpGroup | read-write | mandatory | Specifies the nailed group number. |
| 1.3.6.1.4.1.529.23.140.1.1.5 | Columnx25Profile-NailedMode | read-write | mandatory | Specifies whether it is a nailed or switched. |
| 1.3.6.1.4.1.529.23.140.1.1.6 | Columnx25Profile-CalledNumberType | read-write | mandatory | Indication of whether national national number, international number, etc. is specified. |
| 1.3.6.1.4.1.529.23.140.1.1.7 | Columnx25Profile-SwitchedCallType | read-write | mandatory | Type of bearer channel capability to set up for each switched call in the session. |
| 1.3.6.1.4.1.529.23.140.1.1.8 | Columnx25Profile-PhoneNumber | read-write | mandatory | The phonenumber of the named host. |
| 1.3.6.1.4.1.529.23.140.1.1.9 | Columnx25Profile-BillingNumber | read-write | mandatory | A number used for billing purposes. |
| 1.3.6.1.4.1.529.23.140.1.1.10 | Columnx25Profile-TransitNumber | read-write | mandatory | The string for use in the 'transit network ie' for PRI calling when going through a LEC. |
| 1.3.6.1.4.1.529.23.140.1.1.11 | Columnx25Profile-CallByCallId | read-write | mandatory | Id for the call-by-call signalling for PRI. |
| 1.3.6.1.4.1.529.23.140.1.1.12 | Columnx25Profile-oT1Val | read-write | mandatory | The time interval during which the LAPB shall expect to receive an acknowledgment to an outstanding I PDU or an expected response to a sent unnumbered PDU. |
| 1.3.6.1.4.1.529.23.140.1.1.13 | Columnx25Profile-oT2Val | read-write | mandatory | The maximum delay at LAPB before transmitting a delayed RR. This must be considerably less than T1 the Acknowledgment Timer value. |
| 1.3.6.1.4.1.529.23.140.1.1.14 | Columnx25Profile-oN2Val | read-write | mandatory | Maximum number of times that a PDU is sent following the expiry of the Acknowledgment Timer. |
| 1.3.6.1.4.1.529.23.140.1.1.15 | Columnx25Profile-KVal | read-write | mandatory | LAPB Window size specifying the number of unacknowledged I PDUs which may be sent. |
| 1.3.6.1.4.1.529.23.140.1.1.16 | Columnx25Profile-oPktWindow | read-write | mandatory | X.25 Packet Window size. |
| 1.3.6.1.4.1.529.23.140.1.1.17 | Columnx25Profile-oPktSize | read-write | mandatory | X.25 default Packet size. |
| 1.3.6.1.4.1.529.23.140.1.1.18 | Columnx25Profile-oMinPktSize | read-write | mandatory | X.25 log base 2 of min packet size in negotiation. |
| 1.3.6.1.4.1.529.23.140.1.1.19 | Columnx25Profile-oMaxPktSize | read-write | mandatory | Maximum X.25 Packet size which will be negotiated on calls. |
| 1.3.6.1.4.1.529.23.140.1.1.20 | Columnx25Profile-LowestPVC | read-write | mandatory | X.25 logical channel number assigned to the lowest PVC. |
| 1.3.6.1.4.1.529.23.140.1.1.21 | Columnx25Profile-HighestPVC | read-write | mandatory | X.25 logical channel number assigned to the highest PVC. |
| 1.3.6.1.4.1.529.23.140.1.1.22 | Columnx25Profile-LowestSVC | read-write | mandatory | X.25 logical channel number assigned to the lowest SVC. |
| 1.3.6.1.4.1.529.23.140.1.1.23 | Columnx25Profile-HighestSVC | read-write | mandatory | X.25 logical channel number assigned to the highest SVC. |
| 1.3.6.1.4.1.529.23.140.1.1.24 | Columnx25Profile-ClearDiag | read-write | mandatory | X.25 Clear request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.25 | Columnx25Profile-ResetDiag | read-write | mandatory | X.25 reset request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.26 | Columnx25Profile-RestartDiag | read-write | mandatory | X.25 restart request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.27 | Columnx25Profile-PktOptions | read-write | mandatory | X.25 packet level options. |
| 1.3.6.1.4.1.529.23.140.1.1.28 | Columnx25Profile-PktT20 | read-write | mandatory | X.25 restart request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.29 | Columnx25Profile-PktR20 | read-write | mandatory | Number of times an X.25 restart request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.30 | Columnx25Profile-PktT21 | read-write | mandatory | X.25 call request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.31 | Columnx25Profile-PktT22 | read-write | mandatory | X.25 reset request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.32 | Columnx25Profile-PktR22 | read-write | mandatory | Number of times an X.25 reset request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.33 | Columnx25Profile-PktT23 | read-write | mandatory | X.25 clear request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.34 | Columnx25Profile-PktR23 | read-write | mandatory | Number of times an X.25 clear request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.36 | Columnx25Profile-DteFlag | read-write | mandatory | Indicates the DTE/DCE nature of the X.25 protocol. |
| 1.3.6.1.4.1.529.23.140.1.1.37 | Columnx25Profile-NetType | read-write | mandatory | Net Type Enum |
| 1.3.6.1.4.1.529.23.140.1.1.38 | Columnx25Profile-oDiscMode | read-write | mandatory | Disc Mode: Active or passive |
| 1.3.6.1.4.1.529.23.140.1.1.39 | Columnx25Profile-oSeqNumbers | read-write | mandatory | Sequence numbers mode: normal or extended |
| 1.3.6.1.4.1.529.23.140.1.1.40 | Columnx25Profile-ReverseChargeAcceptance | read-write | mandatory | Reverse Charge Acceptance if set permits the use of reverse charges on Incoming Call packets. |
| 1.3.6.1.4.1.529.23.140.1.1.41 | Columnx25Profile-oVceTimerVal | read-write | mandatory | Virtual Call Establishment Timer Interval: number of seconds to maintain a connection to a character oriented device that has not established a virtual call. A… |
| 1.3.6.1.4.1.529.23.140.1.1.42 | Columnx25Profile-oX25DTeiValue | read-write | mandatory | TEI to be used when D-channel X.25 |
| 1.3.6.1.4.1.529.23.140.1.1.43 | Columnx25Profile-oPriNumberValue | read-write | mandatory | Phone number to be used for BAP |
| 1.3.6.1.4.1.529.23.140.1.1.44 | Columnx25Profile-Action-o | read-write | mandatory | |
| 1.3.6.1.4.1.529.23.140.1.1.45 | Columnx25Profile-IdleVal | read-write | mandatory | Timer used to poll the the remote LAPB when there is no activity on the link to ensure the remote station is still alive. A value of zero disables this functio… |
| 1.3.6.1.4.1.529.23.140.1.1.46 | Columnx25Profile-Maxwinsize | read-write | mandatory | Maximum X.25 Window size which will be negotiated on calls. |
| 1.3.6.1.4.1.529.23.140.1.1.47 | Columnx25Profile-Defwinsize | read-write | mandatory | Default X.25 Window size to use if not specified during call establishment. |
| 1.3.6.1.4.1.529.23.140.1.1.48 | Columnx25Profile-Defpktsize | read-write | mandatory | Default X.25 Packet size to use if not specified during call establishment. |
| 1.3.6.1.4.1.529.23.140.1.1.49 | Columnx25Profile-Pktdiag | read-write | mandatory | Incoming Restart, Clear and Reset Indications will contain the diagnostic byte |
| 1.3.6.1.4.1.529.23.140.1.1.50 | Columnx25Profile-X25SrcAddress | read-write | mandatory | X.25 source address |
| 1.3.6.1.4.1.529.23.140.1.1.51 | Columnx25Profile-ClosedUserGroups | read-write | mandatory | Type of Closed User Group facilities subscribed to. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |