ASCEND-SDSL-MIB
39 objects
No module-level DESCRIPTION found.
Imported Objects
| ASCEND-WAN-MIB | wanTypeSdsl |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.4.8.1 | TablesdslLineStatusTable | not-accessible | mandatory | SDSL status parameters. |
| 1.3.6.1.4.1.529.4.8.1.1 | RowsdslLineStatusEntry | not-accessible | mandatory | An interface status entry containing objects to describe the interface. |
| 1.3.6.1.4.1.529.4.8.1.1.1 | ColumnsdslStatusIfEntryIndex | read-only | mandatory | Interface group index assigned to this port. |
| 1.3.6.1.4.1.529.4.8.1.1.2 | ColumnsdslStatusShelfIndex | read-only | mandatory | TNT's SDSL modules Shelf ID. |
| 1.3.6.1.4.1.529.4.8.1.1.3 | ColumnsdslStatusSlotIndex | read-only | mandatory | TNT's SDSL modules Slot ID. |
| 1.3.6.1.4.1.529.4.8.1.1.4 | ColumnsdslStatusLineIndex | read-only | mandatory | SDSL modules line ID. |
| 1.3.6.1.4.1.529.4.8.1.1.5 | ColumnsdslStatusUnitType | read-only | mandatory | Unit type defines if the unit is operating either as a Central Office Equipment (COE) or Customer Premiss equipment (CPE). |
| 1.3.6.1.4.1.529.4.8.1.1.6 | ColumnsdslStatusLineState | read-only | mandatory | Interface state describes the current ports operating state. States are: Config, Pend Down, Up, Down, Start-up, or N/A. |
| 1.3.6.1.4.1.529.4.8.1.1.7 | ColumnsdslStatusUpRate | read-write | deprecated | The current up stream (cpe to coe) rate The object dslStatusUpRate is deprecated. To set line rate the object sdslConfigLineRate of the new sdslLineConfigTable… |
| 1.3.6.1.4.1.529.4.8.1.1.8 | ColumnsdslStatusDownRate | read-write | deprecated | The current down stream (coe to cpe) rate The object dslStatusDownRate is deprecated. To set line rate the object sdslConfigLineRate of the new sdslLineConfigT… |
| 1.3.6.1.4.1.529.4.8.1.1.9 | ColumnsdslStatusVendorId | read-only | mandatory | Vendor identification. |
| 1.3.6.1.4.1.529.4.8.1.1.10 | ColumnsdslStatusMajorFirmWareVer | read-only | mandatory | Major firmware version. |
| 1.3.6.1.4.1.529.4.8.1.1.11 | ColumnsdslStatusMinorFirmWareVer | read-only | mandatory | Minor firmware version. |
| 1.3.6.1.4.1.529.4.8.1.1.12 | ColumnsdslStatusHardWareVer | read-only | mandatory | Hardware version. |
| 1.3.6.1.4.1.529.4.8.1.1.13 | ColumnsdslStatusLineRate | read-only | mandatory | The current line rate |
| 1.3.6.1.4.1.529.4.8.2 | TablesdslLineStatisticTable | not-accessible | mandatory | SDSL statistical parameters. |
| 1.3.6.1.4.1.529.4.8.2.1 | RowsdslLineStatisticEntry | not-accessible | mandatory | An interface statistical entry containing objects to describe the interface. |
| 1.3.6.1.4.1.529.4.8.2.1.1 | ColumnsdslStatIfEntryIndex | read-only | mandatory | The interface groups interface index is used to index into this table. |
| 1.3.6.1.4.1.529.4.8.2.1.2 | ColumnsdslStatShelfIndex | read-only | mandatory | SDSL modules Shelf ID. |
| 1.3.6.1.4.1.529.4.8.2.1.3 | ColumnsdslStatSlotIndex | read-only | mandatory | SDSL modules Slot ID. |
| 1.3.6.1.4.1.529.4.8.2.1.4 | ColumnsdslStatLineIndex | read-only | mandatory | SDSL modules interface ID. |
| 1.3.6.1.4.1.529.4.8.2.1.5 | ColumnsdslStatConnUpDays | read-only | mandatory | Connection up day count. |
| 1.3.6.1.4.1.529.4.8.2.1.6 | ColumnsdslStatConnUpHours | read-only | mandatory | Connection Up 24 hour count. |
| 1.3.6.1.4.1.529.4.8.2.1.7 | ColumnsdslStatConnUpMinutes | read-only | mandatory | Connection up minute count. |
| 1.3.6.1.4.1.529.4.8.2.1.8 | ColumnsdslStatRxSignalPresent | read-only | mandatory | Receive signal present detection. |
| 1.3.6.1.4.1.529.4.8.2.1.9 | ColumnsdslStatLineQualityDb | read-only | mandatory | Lines noise margin. Reliable data will transfer with a reading of -5db or greater. |
| 1.3.6.1.4.1.529.4.8.2.1.10 | ColumnsdslStatUpDwnCntr | read-only | mandatory | Line Up Down counter value displays the number of times the interface transitions from a down to up state. |
| 1.3.6.1.4.1.529.4.8.2.1.11 | ColumnsdslStatLineSelfTest | read-only | mandatory | Line hardware self test results (Passed or Failed). |
| 1.3.6.1.4.1.529.4.8.2.1.12 | ColumnsdslStatBertTimer | read-write | mandatory | BER test duration configuration. The BER test lasts for the duration of this timer. |
| 1.3.6.1.4.1.529.4.8.2.1.13 | ColumnsdslStatBertEna | read-write | mandatory | Enable/disable of the BER test. If nodes are connected, then the BER test is ran between the units. If this node is not connected to a remote node, then the in… |
| 1.3.6.1.4.1.529.4.8.2.1.14 | ColumnsdslStatBertState | read-only | mandatory | BER test states. When this node is not connected to another node, the test is disabled. When two nodes are connected then the BER test waits for the other node… |
| 1.3.6.1.4.1.529.4.8.2.1.15 | ColumnsdslStatBertErrorCounter | read-only | mandatory | BER test bit error counter. |
| 1.3.6.1.4.1.529.4.8.3 | TablesdslLineConfigTable | not-accessible | mandatory | SDSL status parameters. |
| 1.3.6.1.4.1.529.4.8.3.1 | RowsdslLineConfigEntry | not-accessible | mandatory | An interface status entry containing objects to describe the interface. |
| 1.3.6.1.4.1.529.4.8.3.1.1 | ColumnsdslConfigIfEntryIndex | read-only | mandatory | Interface group index assigned to this port. |
| 1.3.6.1.4.1.529.4.8.3.1.2 | ColumnsdslConfigShelfIndex | read-only | mandatory | TNT's SDSL modules Shelf ID. |
| 1.3.6.1.4.1.529.4.8.3.1.3 | ColumnsdslConfigSlotIndex | read-only | mandatory | TNT's SDSL modules Slot ID. |
| 1.3.6.1.4.1.529.4.8.3.1.4 | ColumnsdslConfigLineIndex | read-only | mandatory | SDSL modules line ID. |
| 1.3.6.1.4.1.529.4.8.3.1.5 | ColumnsdslConfigLineRate | read-write | mandatory | The current line rate |