ASKEY-HARDWARE-INFORMATION-MIB
29 objects
This Mib describs with the information of network card, line card and fan module.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3646.1300.2.15 | IdentityaskeyHwInfo | This Mib describs with the information of network card, line card and fan module. | ||
| 1.3.6.1.4.1.3646.1300.2.15.1 | TableaskeyHwInfoTable | not-accessible | current | This table describes the information and the limit of voltage and temperature about network card, line card and fan tray. |
| 1.3.6.1.4.1.3646.1300.2.15.1.1 | RowaskeyHwInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.1 | ColumnaskeyHwInfoType | not-accessible | current | This object describes the measure value about rotation speed of fan, voltage or temperature of the equipment include network card, line card, and fan tray. |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.2 | ColumnaskeyHwSensorId | not-accessible | current | This object describes the index that mapping to the sensor of the hardware device: on the network card, there is 1 max6652; on the line card, there are 2 max66… |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.3 | ColumnaskeyHwSensorDescription | read-only | current | This object describes the sensor on the nc or lc |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.4 | ColumnaskeyHwValue | read-only | current | This object describes the value of hardware on the nc or lc |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.5 | ColumnaskeyHwRefValue | read-only | current | This object describes the reference value of hardware on the nc or lc |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.6 | ColumnaskeyHwValueThreshholdLow | read-only | current | This object describes the low-bound value of the voltage on the nc or lc. If the measured value is lower than the value, the system will report the alarm. |
| 1.3.6.1.4.1.3646.1300.2.15.1.1.7 | ColumnaskeyHwValueThreshholdHigh | read-only | current | This object describes the high-bound value of the voltage on the nc or lc. If the measured value is higher than the value, the system will report the alarm. |
| 1.3.6.1.4.1.3646.1300.2.15.2 | NodesensorThresholds | |||
| 1.3.6.1.4.1.3646.1300.2.15.2.1 | ScalarsensorTempHigh | read-write | current | The threshold for temperature up bound. Its range is from -20 C to 100 C |
| 1.3.6.1.4.1.3646.1300.2.15.2.2 | ScalarsensorTempLow | read-write | current | The threshold for temperature low bound. Its range is from -20 C to 100 C |
| 1.3.6.1.4.1.3646.1300.2.15.3 | TablegbicModuleTable | not-accessible | current | GBIC module information |
| 1.3.6.1.4.1.3646.1300.2.15.3.1 | RowgbicModuleTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.1 | ColumngbicIdentifier | read-only | current | This object describes the identifier value specifies the physical device described by the serial information. A value 3 means SFP. |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.2 | ColumngbicConnector | read-only | current | The connector value indicates the external connector provided on the interface. A value 1 means SC. A value 7 means LC. |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.3 | ColumngbicTransceiver | read-only | current | This object describes the gigabit ethernet compliance codes.The following bit significant indicators define the electronic or optical interfaces that are suppo… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.4 | ColumngbicEncoding | read-only | current | The encoding value indicates the serial encoding mechanism that is the nominal design target of the particular GBIC. value 0 - Unspecified 1 - 8B10B 2 - 4B5B 3… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.5 | ColumngbicBrNominal | read-only | current | The nominal bit rate (BR, nominal) is specified in units of 100 Megabits per second, rounded off to the nearest 100 Megabits per second. The bit rate includes … |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.6 | ColumngbicLength9um | read-only | current | This value specifies the link length that is supported by the GBIC while operating in compliance with the applicable standards using single mode fiber.The valu… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.7 | ColumngbicLength50um | read-only | current | This value specifies the link length that is supported by the GBIC while operating in compliance with the applicable standards using 50 micron multi-mode fiber… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.8 | ColumngbicLength62-5um | read-only | current | This value specifies the link length that is supported by the GBIC while operating in compliance with the applicable standards using 62.5 micron multi-mode fib… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.9 | ColumngbicCopperLength | read-only | current | This value specifies the minimum link length that is supported by the GBIC while operating in compliance with the applicable standards using copper cable. The … |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.10 | ColumngbicVendorName | read-only | current | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h). The vendor name shall be … |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.11 | ColumngbicVendorOUI | read-only | current | The vendor organizationally unique identifier field (vendor OUI) is a 3-byte field that contains the IEEE Company Identifier for the vendor. A value of all zer… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.12 | ColumngbicVendorPN | read-only | current | The vendor part number (vendor PN) is a 16-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h), defining th… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.13 | ColumngbicVendorSN | read-only | current | The vendor serial number (vendor SN) is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h), defi… |
| 1.3.6.1.4.1.3646.1300.2.15.3.1.14 | ColumngbicLaserWaveLength | read-only | current | This object describes the fibre channel transmitter wave laser length(nm). |