ASKEY-SYSTEM-MIB
142 objects
ASKEY ADSL MIB OID defines and documentation.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3646.1300.2.1 | IdentityaskeySystemMib | ASKEY ADSL MIB OID defines and documentation. | ||
| 1.3.6.1.4.1.3646.1300.2.1.1 | NodeipConfig | |||
| 1.3.6.1.4.1.3646.1300.2.1.1.1 | NodenodeIP | |||
| 1.3.6.1.4.1.3646.1300.2.1.1.1.1 | ScalarnodeIPAddr | read-write | current | The IP address of node. It applies to the trunk (up-link) port. |
| 1.3.6.1.4.1.3646.1300.2.1.1.1.2 | ScalarnodeIPNetMask | read-write | current | The subnet mask associated with the IP address of this node. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits s… |
| 1.3.6.1.4.1.3646.1300.2.1.1.1.3 | ScalarnodeMACAddr | read-only | current | The MAC address of the trunk (up-link) port. |
| 1.3.6.1.4.1.3646.1300.2.1.1.1.4 | ScalargatewayIPAddr | read-write | current | The gateway IP address of node. It applies to the trunk (up-link) port. |
| 1.3.6.1.4.1.3646.1300.2.1.1.2 | NodemgmtIP | |||
| 1.3.6.1.4.1.3646.1300.2.1.1.2.1 | ScalarmgmtIPAddr | read-write | current | The IP address of the management (out-band) port. |
| 1.3.6.1.4.1.3646.1300.2.1.1.2.2 | ScalarmgmtIPNetMask | read-write | current | The subnet mask associated with the IP address of the management port. The value of the mask is an IP address with all the network bits set to 1 and all the ho… |
| 1.3.6.1.4.1.3646.1300.2.1.1.2.3 | ScalarmgmtMACAddr | read-only | current | The MAC address of the manaement (out-band) port. |
| 1.3.6.1.4.1.3646.1300.2.1.2 | NodenodeTime | |||
| 1.3.6.1.4.1.3646.1300.2.1.2.1 | Scalartime | read-write | current | The time <yyyy-mm-dd hh:mm:ss> of the system. |
| 1.3.6.1.4.1.3646.1300.2.1.2.2 | Scalarzone | read-write | current | The time zone of the system. |
| 1.3.6.1.4.1.3646.1300.2.1.6 | NodesnmpTrapMib | |||
| 1.3.6.1.4.1.3646.1300.2.1.6.1 | TablesnmpTrapTable | not-accessible | current | This table contains information for SNMP Trap. |
| 1.3.6.1.4.1.3646.1300.2.1.6.1.1 | RowsnmpTrapEntry | not-accessible | current | An entry of parameters in snmpTrap table. |
| 1.3.6.1.4.1.3646.1300.2.1.6.1.1.1 | ColumnsnmpTrapStation | not-accessible | current | The IP address of the workstation which the SNMP Trap is sent to. |
| 1.3.6.1.4.1.3646.1300.2.1.6.1.1.2 | ColumnsnmpTrapCommunity | read-create | current | DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a va… |
| 1.3.6.1.4.1.3646.1300.2.1.6.1.1.3 | ColumnsnmpTrapSNMPVersion | read-only | current | This object indicates the version of SNMPv1 or SNMPv2c. |
| 1.3.6.1.4.1.3646.1300.2.1.6.1.1.4 | ColumnsnmpTrapRowStatus | read-create | current | This object indicates the status of SNMP trap. |
| 1.3.6.1.4.1.3646.1300.2.1.7 | NodesnmpCommunityMib | |||
| 1.3.6.1.4.1.3646.1300.2.1.7.1 | TablesnmpCommunityTable | not-accessible | current | A table of SNMPv1/v2c community string to SNMPv3 view name mappings. |
| 1.3.6.1.4.1.3646.1300.2.1.7.1.1 | RowsnmpCommunityEntry | not-accessible | current | An entry containing objects about SNMP community at this systemp. |
| 1.3.6.1.4.1.3646.1300.2.1.7.1.1.1 | ColumnsnmpCommunityName | not-accessible | current | The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name. Attemptin… |
| 1.3.6.1.4.1.3646.1300.2.1.7.1.1.2 | ColumnsnmpCommunityPermission | read-create | current | This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SE… |
| 1.3.6.1.4.1.3646.1300.2.1.7.1.1.3 | ColumnsnmpCommunityRowStatus | read-create | current | This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (if all objects without default values are suppli… |
| 1.3.6.1.4.1.3646.1300.2.1.9 | TableaskeyDslamFdbTable | not-accessible | current | A table that contains information about unicast entries for which the IP-DSLAM has forwarding and/or filtering information. This information is used by the tra… |
| 1.3.6.1.4.1.3646.1300.2.1.9.1 | RowaskeyDslamFdbEntry | not-accessible | current | Information about a specific unicast MAC address on a specific line for which the IP-DSLAM has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.3646.1300.2.1.9.1.1 | ColumnfdbMacIndex | read-only | current | A simple index into 'askeyDslamFdbTable'. |
| 1.3.6.1.4.1.3646.1300.2.1.9.1.2 | ColumnfdbVpi | read-only | current | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits. |
| 1.3.6.1.4.1.3646.1300.2.1.9.1.3 | ColumnfdbVci | read-only | current | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits. |
| 1.3.6.1.4.1.3646.1300.2.1.9.1.4 | ColumnmacAddress | read-only | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.3646.1300.2.1.9.1.5 | ColumnaskeyDslamFdbStatus | read-only | current | The status of this entry. The meanings of the values are: learned_unique(1): the value of the corresponding instance of macAddress was learned, and is being us… |
| 1.3.6.1.4.1.3646.1300.2.1.10 | ScalarconfigDataMib | read-write | current | save(1): save the current configuration data to NVRAM(flash) as the main configuration data. restore(2): replace the main configuration data with the backup co… |
| 1.3.6.1.4.1.3646.1300.2.1.11 | TableaskeyCardInfoTable | not-accessible | current | This table is information about card/slot on ASKEY IPDSLAM. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1 | RowaskeyCardInfoEntry | not-accessible | current | An entry about information of the card/slot. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.1 | ColumnaskeyCardPlannedType | read-write | current | Supposed type of this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.2 | ColumnaskeyCardType | read-only | current | Current working type of this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.3 | ColumnaskeyCardHWVersion | read-only | current | The Hardware version of this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.4 | ColumnaskeyCardSWVersion | read-only | current | The Software version of this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.5 | ColumnaskeyCardImage | read-only | current | Description for the location of the image. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.6 | ColumnaskeyCardUptime | read-only | current | The uptime (in seconds) of this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.7 | ColumnaskeyCardRole | read-only | current | This object descibes the card role. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.8 | ColumnaskeyCardSerialNumber | read-only | current | The card serial number which is an unique number. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.9 | ColumnaskeyCardAdminStatus | read-write | current | The operation of this card. Only value is 'reset(1)' will reset this card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.10 | ColumnaskeyCardOperStatus | read-only | current | This object indicates the card's operational status. The notPresent(3) status indicates the card is physically removed (note this may or may not be possible de… |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.11 | ColumnlineCardAdminVlanTagPassEnabled | read-write | current | Enable(1) or disable VLAN tag pass through function. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.12 | ColumnlineCardOperVlanTagPassEnabled | read-only | current | Current status of VLAN tag passes through funtion. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.13 | ColumnlineCardAdminRfc2684Encap | read-write | current | Setting this object to LLC (1) to encapsulate the packet to LLC style. Setting it to vcMux (2) to encapsulate the packet to VC-MUX style. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.14 | ColumnlineCardOperRfc2684Encap | read-only | current | Current applied rfc2684 encapsulation method. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.15 | ColumnlineCardServiceTypeControl | read-write | current | Set or get applied control of service type. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.16 | ColumnshdslFirmwareUpgrade | read-write | current | Upgrade SHDSL line card firmware. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.17 | ColumnshdslFirmwareUpgradeState | read-only | current | SHDSL line card firmware pgrade state. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.18 | ColumntaggedModeAdminStatus | read-write | current | Card administrative tagged mode. This entry indicates tagged mode configured on the specific card. |
| 1.3.6.1.4.1.3646.1300.2.1.11.1.19 | ColumntaggedModeOperStatus | read-only | current | Card operational tagged mode. This entry indicates tagged mode running on the specific card. All ports of the tagged type card will drop packets that don't hav… |
| 1.3.6.1.4.1.3646.1300.2.1.12 | NodelinePortInfo | |||
| 1.3.6.1.4.1.3646.1300.2.1.12.1 | TablelinePortInfoTable | not-accessible | current | A list of line port information entries. |
| 1.3.6.1.4.1.3646.1300.2.1.12.1.1 | RowlinePortInfoEntry | not-accessible | current | An information entry containing objects for each line port. |
| 1.3.6.1.4.1.3646.1300.2.1.12.1.1.1 | ColumnlinePortAdminStatus | read-write | current | The desired state of the line port. The enable(1) state ready to pass packets. The disable(2) state stop passing any packets. The testing(3) state indicates th… |
| 1.3.6.1.4.1.3646.1300.2.1.12.1.1.2 | ColumnlinePortOperStatus | read-only | current | This object indicates the line port's operational status. The notPresent(3) status indicates the line port is physically removed (note this may or may not be p… |
| 1.3.6.1.4.1.3646.1300.2.1.12.1.1.3 | ColumncircuitID | read-only | current | The identity for this circuit. The value is 'shelf.slot.port'. |
| 1.3.6.1.4.1.3646.1300.2.1.12.1.1.4 | ColumnremoteID | read-write | current | The string is sent transparently to authorization service. |
| 1.3.6.1.4.1.3646.1300.2.1.13 | Scalardot1TpMACAging | read-write | current | This object decides MAC enrties aged out or not. aged: MAC entries will be aged out nonaged: MAC entries will never be aged out |
| 1.3.6.1.4.1.3646.1300.2.1.14 | ScalaraskeyRebootSystemAction | read-write | current | Reboot the system. |
| 1.3.6.1.4.1.3646.1300.2.1.15 | NodeaskeyDslamOam | |||
| 1.3.6.1.4.1.3646.1300.2.1.15.1 | NodeoamF5 | |||
| 1.3.6.1.4.1.3646.1300.2.1.15.1.1 | ScalaroamF5IfIndex | read-write | current | The ifIndex of the line. |
| 1.3.6.1.4.1.3646.1300.2.1.15.1.2 | ScalaroamF5Vpi | read-write | current | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits. |
| 1.3.6.1.4.1.3646.1300.2.1.15.1.3 | ScalaroamF5Vci | read-write | current | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits. |
| 1.3.6.1.4.1.3646.1300.2.1.15.1.4 | ScalaroamF5Scope | read-write | current | The scope of the OAM F5 loopback cell. Set this object will trigger OAM processing. |
| 1.3.6.1.4.1.3646.1300.2.1.16 | NodeaskeySystemManagementInfo | |||
| 1.3.6.1.4.1.3646.1300.2.1.16.1 | ScalaraskeyEmsVlanId | read-write | current | In-band management VLAN ID. |
| 1.3.6.1.4.1.3646.1300.2.1.16.2 | NodeaskeyBootDevice | |||
| 1.3.6.1.4.1.3646.1300.2.1.16.2.1 | ScalaraskeyNextBootDevice | read-write | current | Configure the next boot partition. |
| 1.3.6.1.4.1.3646.1300.2.1.16.2.2 | ScalaraskeyCurrentBootDevice | read-only | current | Show current the boot partition. |
| 1.3.6.1.4.1.3646.1300.2.1.16.3 | ScalaraskeySystemManagementIgmp | read-write | current | Configure the IGMP proxy and IGMP snoop. |
| 1.3.6.1.4.1.3646.1300.2.1.16.4 | NodeaskeyRedundancy | |||
| 1.3.6.1.4.1.3646.1300.2.1.16.4.1 | ScalaraskeyRedundancyAutoSyncEnabled | read-write | current | The Askey IPDSLAM can auto synchronize standby NC configuration with active NC. This object enables or disables such synchronization. |
| 1.3.6.1.4.1.3646.1300.2.1.16.4.2 | ScalaraskeyRedundancyAutoSyncPeriod | read-write | current | Auto synchronization period. The value unit is in second. |
| 1.3.6.1.4.1.3646.1300.2.1.16.4.3 | ScalaraskeyRedundancySync | read-write | current | Synchronize redundancy immediately. |
| 1.3.6.1.4.1.3646.1300.2.1.16.5 | NodeaskeySystemManagementInfoVlan | |||
| 1.3.6.1.4.1.3646.1300.2.1.16.5.1 | TableaskeySystemManagementInfoVlanMacLimitTable | not-accessible | current | A table that contains information about the MAC limit per VLAN ID. |
| 1.3.6.1.4.1.3646.1300.2.1.16.5.1.1 | RowaskeySystemManagementInfoVlanMacLimitEntry | not-accessible | current | Information about the MAC limit per VLAN. |
| 1.3.6.1.4.1.3646.1300.2.1.16.5.1.1.1 | ColumnaskeySystemManagementInfoVlanID | not-accessible | current | The ID of target VLAN which MAC limits. |
| 1.3.6.1.4.1.3646.1300.2.1.16.5.1.1.2 | ColumnaskeySystemManagementInfoVlanMacLimit | read-write | current | MAC limit on specific VLAN. Default values are 5376 for AM0021 and 1568 for AM0031. |
| 1.3.6.1.4.1.3646.1300.2.1.16.5.1.1.3 | ColumnaskeySystemManagementInfoVlanMacLimitEnabled | read-write | current | Enable or disable MAC limit. |
| 1.3.6.1.4.1.3646.1300.2.1.18 | NodeaskeyCosQueue | |||
| 1.3.6.1.4.1.3646.1300.2.1.18.1 | TableaskeyCosQueueMappingTable | not-accessible | current | A table that contains information about COS queues mapping with 802.1p. |
| 1.3.6.1.4.1.3646.1300.2.1.18.1.1 | RowaskeyCosQueueMappingEntry | not-accessible | current | Information about COS queue mapping. |
| 1.3.6.1.4.1.3646.1300.2.1.18.1.1.1 | ColumnaskeyCosQueueMapping8021p | read-only | current | The identity of the specific 802.1p priority mapping. |
| 1.3.6.1.4.1.3646.1300.2.1.18.1.1.2 | ColumnaskeyCosQueueIndex | read-write | current | The index of COS queue. |
| 1.3.6.1.4.1.3646.1300.2.1.19 | TableaskeySystemUserAccountTable | not-accessible | current | This table contains information of system user account. One entry in this table reflects a user information. |
| 1.3.6.1.4.1.3646.1300.2.1.19.1 | RowaskeySystemUserAccountEntry | not-accessible | current | An entry reflects a user information. |
| 1.3.6.1.4.1.3646.1300.2.1.19.1.1 | ColumnaskeySystemUserAccountUserName | read-create | current | The name of account user. |
| 1.3.6.1.4.1.3646.1300.2.1.19.1.2 | ColumnaskeySystemUserAccountPassword | read-create | current | The password of account user. |
| 1.3.6.1.4.1.3646.1300.2.1.19.1.3 | ColumnaskeySystemUserAccountGroup | read-create | current | The group which account belongs to. |
| 1.3.6.1.4.1.3646.1300.2.1.19.1.4 | ColumnaskeySystemUserAccountRowStatus | read-create | current | This object controls creation/deletion of the associated entry in this table as per the semantics of RowStatus. |
| 1.3.6.1.4.1.3646.1300.2.1.20 | NodeaskeyPPPoE | |||
| 1.3.6.1.4.1.3646.1300.2.1.20.1 | Scalarsuboption | read-write | current | Enable or disable PPPoE suboption. The circuit information recorded on 'linePortInfo' table will be transferred to authorization service, for example, a radius… |
| 1.3.6.1.4.1.3646.1300.2.1.21 | NodednsService | |||
| 1.3.6.1.4.1.3646.1300.2.1.21.1 | ScalardnsServer1IPAddress | read-write | current | The IP address of DNS server. This server is used first priority. |
| 1.3.6.1.4.1.3646.1300.2.1.21.2 | ScalardnsServer2IPAddress | read-write | current | The IP address of DNS server. This server is used second priority. |
| 1.3.6.1.4.1.3646.1300.2.1.21.3 | ScalardnsServer3IPAddress | read-write | current | The IP address of DNS server. This server is used lowest priority. |
| 1.3.6.1.4.1.3646.1300.2.1.22 | NodetimeService | |||
| 1.3.6.1.4.1.3646.1300.2.1.22.1 | Scalarprotocol | read-write | current | The time service is used which protocol. |
| 1.3.6.1.4.1.3646.1300.2.1.22.2 | ScalarupdatePeriod | read-write | current | Synchronize time which system update time by time servers. This object unit is in minute. |
| 1.3.6.1.4.1.3646.1300.2.1.22.3 | ScalartimeServer1InetAddress | read-write | current | The address of time server1. This server is used first priority. |
| 1.3.6.1.4.1.3646.1300.2.1.22.4 | ScalartimeServer2InetAddress | read-write | current | The address of time server2. This server is used second priority. |
| 1.3.6.1.4.1.3646.1300.2.1.22.5 | ScalartimeServer3InetAddress | read-write | current | The address of time server3. This server is used lowest priority. |
| 1.3.6.1.4.1.3646.1300.2.1.22.6 | ScalartimeServer1Status | read-only | current | server1 current status. |
| 1.3.6.1.4.1.3646.1300.2.1.22.7 | ScalartimeServer2Status | read-only | current | server2 current status. |
| 1.3.6.1.4.1.3646.1300.2.1.22.8 | ScalartimeServer3Status | read-only | current | server3 current status. |
| 1.3.6.1.4.1.3646.1300.2.1.22.9 | ScalartimeZone | read-write | current | The system time zone. |
| 1.3.6.1.4.1.3646.1300.2.1.23 | NodeugeMIBObjects | |||
| 1.3.6.1.4.1.3646.1300.2.1.23.2 | TableugeAutoNegotiationTable | not-accessible | current | The table indicates UGE auto negotiation states. |
| 1.3.6.1.4.1.3646.1300.2.1.23.2.1 | RowugeAutoNegotionEntry | not-accessible | current | An entry indicates UGE auto negotiation states. |
| 1.3.6.1.4.1.3646.1300.2.1.23.2.1.1 | ColumnautoNegotiationState | read-write | current | Enable or disable UGE port auto negotiation. |
| 1.3.6.1.4.1.3646.1300.2.1.23.3 | TableugePauseFrameStatisticTable | not-accessible | current | The table indicates UGE pause packet statistic. |
| 1.3.6.1.4.1.3646.1300.2.1.23.3.1 | RowugePauseFrameStatisticEntry | not-accessible | current | An entry indicates UGE pause packet statistic. |
| 1.3.6.1.4.1.3646.1300.2.1.23.3.1.1 | ColumnrxPausePackets | read-only | current | The counter indicates pause packets received from this UGE. |
| 1.3.6.1.4.1.3646.1300.2.1.23.3.1.2 | ColumntxPausePackets | read-only | current | The counter indicates pause packets transmitted by this UGE. |
| 1.3.6.1.4.1.3646.1300.2.1.23.4 | TablesubtendVLANTable | not-accessible | current | The table indicates which VLAN packets can pass through subtending ports. |
| 1.3.6.1.4.1.3646.1300.2.1.23.4.1 | RowsubtendVLANEntry | not-accessible | current | An entry for subtendVLANTable. |
| 1.3.6.1.4.1.3646.1300.2.1.23.4.1.1 | ColumnsubtendState | read-write | current | Enable or disable NC VLAN subtend. |
| 1.3.6.1.4.1.3646.1300.2.1.23.4.1.2 | ColumnsubtendVLAN | read-write | current | Specify what VLAN can pass through by subtending port. |
| 1.3.6.1.4.1.3646.1300.2.1.23.5 | TableugeVLANTable | not-accessible | current | This table indicates relation between UGEs and packets with specific VLAN tags. Only packets with tag values can been send out from UGEs, otherwise will not. |
| 1.3.6.1.4.1.3646.1300.2.1.23.5.1 | RowugeVLANEntry | not-accessible | current | An entry for ugeVLANTable. |
| 1.3.6.1.4.1.3646.1300.2.1.23.5.1.1 | ColumnugeVLAN | read-only | current | Specify what VLAN can pass through by UGE port. |
| 1.3.6.1.4.1.3646.1300.2.1.24 | NodesecuredHosts | |||
| 1.3.6.1.4.1.3646.1300.2.1.24.1 | ScalarsecuredHostAdminStatus | read-write | current | Enable or disable secured host function. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2 | TablesecuredHostTable | not-accessible | current | This table provides the information of the secured hosts which may access managed system. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2.1 | RowsecuredHostEntry | not-accessible | current | An entry to information of the secured hosts which may access managed system. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2.1.1 | ColumnsecuredIPSectorIndex | not-accessible | current | An IP sector index. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2.1.2 | ColumnsecuredIPSectorStartIP | read-write | current | An IP address expresses IP sector starting. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2.1.3 | ColumnsecuredIPSectorEndIP | read-write | current | An IP address expresses IP sector ending. |
| 1.3.6.1.4.1.3646.1300.2.1.24.2.1.4 | ColumnallowedServiceType | read-write | current | Contains indicates whether access mode is enabled or disabled. This is a bit-map of possible settings. |
| 1.3.6.1.4.1.3646.1300.2.1.25 | NodenetBIOSFilter | |||
| 1.3.6.1.4.1.3646.1300.2.1.25.1 | ScalarnetBIOSFilterAction | read-write | current | Drop or forward NetBIOS/NetBEUI packets. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IPSectionIndex | INTEGER (1..10) | current | A unique value, greater than zero, for denoting an IP section. The IP section represents a range of the IP address from some IP to another IP. |
| MacAddress | OCTET STRING (SIZE (6)) | ||
| VLANList | OCTET STRING | current | Each octet within this value specifies a set of eight VLAN IDs, with the first octet specifying VLAN ID 0 through 7, the second octet specifying VLAN ID 8 through 15, etc. Within each octet, the most significant bit rep… |