ASM-PRIVATE-COMMIB
665 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1050 | Nodeacer | |||
| 1.3.6.1.4.1.1050.25 | Nodeasm | |||
| 1.3.6.1.4.1.1050.25.1 | Nodestorage | |||
| 1.3.6.1.4.1.1050.25.1 | NodetrapTemperatureWarning | The agent will send a trap of this type when temperatures exceed the first level threshold value. | ||
| 1.3.6.1.4.1.1050.25.1.1 | TabledisketteDriveTable | not-accessible | mandatory | This entry is a table containing information about all diskette drives. |
| 1.3.6.1.4.1.1050.25.1.1.1 | RowdisketteDriveEntry | not-accessible | mandatory | This entry contains information about each diskette drive. |
| 1.3.6.1.4.1.1050.25.1.1.1.1 | ColumndisketteDrvIndex | read-only | mandatory | This entry displays the diskette drive table index. |
| 1.3.6.1.4.1.1050.25.1.1.1.2 | ColumndisketteDrvType | read-only | mandatory | This entry displays the diskette drive type: 0 = Not present 1 = 360K 5.25inch 2 = 1.2M 5.25inch 3 = 720K 3.5inch 4 = 1.44M 3.5inch 5 = 2.88M 3.5inch |
| 1.3.6.1.4.1.1050.25.1.2 | ScalartotalHdCntrlNum | read-only | mandatory | This entry displays the total number of hard disk controllers (HDC). |
| 1.3.6.1.4.1.1050.25.1.3 | TablehdControllerTable | not-accessible | mandatory | This entry is a table containing information about all HDCs. |
| 1.3.6.1.4.1.1050.25.1.3.1 | RowhdControllerEntry | not-accessible | mandatory | This entry contains information about each HDC. |
| 1.3.6.1.4.1.1050.25.1.3.1.1 | ColumnhdCntrlNum | read-only | mandatory | This entry is an index to the HDC table starting at zero (0). |
| 1.3.6.1.4.1.1050.25.1.3.1.2 | ColumnhdCntrlSlotNum | read-only | mandatory | This entry shows the slot number occupied by the controller. |
| 1.3.6.1.4.1.1050.25.1.3.1.4 | ColumnhdCntrlType | read-only | mandatory | This entry shows the HDC type: 0 = Unknown 1 = SCSI 2 = IDE |
| 1.3.6.1.4.1.1050.25.1.3.1.6 | ColumnhdCntrlIoPort | read-only | mandatory | This entry shows the I/O port address occupied by the HDC. |
| 1.3.6.1.4.1.1050.25.1.3.1.7 | ColumnhdCntrlIntr | read-only | mandatory | This entry shows the interrupt number occupied by the HDC. |
| 1.3.6.1.4.1.1050.25.1.3.1.9 | ColumnhdCntrlDMA | read-only | mandatory | This entry shows the DMA channel occupied by the HDC. |
| 1.3.6.1.4.1.1050.25.1.3.1.11 | ColumnhdCntrlModel | read-only | mandatory | This entry shows the HDC model name. |
| 1.3.6.1.4.1.1050.25.1.4 | ScalartotalDiskNum | read-only | mandatory | This entry displays the number of hard disks installed. |
| 1.3.6.1.4.1.1050.25.1.5 | TablediskTable | not-accessible | mandatory | This entry is a table containing information about all hard disks installed. |
| 1.3.6.1.4.1.1050.25.1.5.1 | RowdiskEntry | not-accessible | mandatory | This entry contains information about each disk drive installed. |
| 1.3.6.1.4.1.1050.25.1.5.1.1 | ColumndiskNum | read-only | mandatory | This entry is an index to the disk table starting at zero (0). |
| 1.3.6.1.4.1.1050.25.1.5.1.2 | ColumndiskHdCntrlNum | read-only | mandatory | This entry shows the HDC number (refer to hdCntrlNum) to which the disk is connected. |
| 1.3.6.1.4.1.1050.25.1.5.1.3 | ColumndiskHdCntrlSlotNum | read-only | mandatory | This entry shows the slot number of the HDC (refer to hdCntrlSlotNum) to which the disk is connected. |
| 1.3.6.1.4.1.1050.25.1.5.1.5 | ColumndiskId | read-only | mandatory | This entry displays disk IDs depending on each disk type. For example, with a SCSI disk installed, the value for this entry will represent a SCSI ID. IDE disks… |
| 1.3.6.1.4.1.1050.25.1.5.1.7 | ColumndiskSize | read-only | mandatory | This entry shows the physical disk size in KB. |
| 1.3.6.1.4.1.1050.25.1.5.1.8 | ColumndiskModel | read-only | mandatory | This entry shows the disk model. |
| 1.3.6.1.4.1.1050.25.1.5.1.10 | ColumndiskType | read-only | mandatory | This entry shows the disk type, i.e. SCSI, IDE or N/A. |
| 1.3.6.1.4.1.1050.25.1.5.1.12 | ColumndiskBusyRatio | read-only | mandatory | This entry shows the Disk Busy ratio (%). |
| 1.3.6.1.4.1.1050.25.1.5.1.13 | ColumnaverageDiskReadWriteTime | read-only | mandatory | This entry shows the disk's average read/write time. |
| 1.3.6.1.4.1.1050.25.1.5.1.14 | ColumnnumberOfDiskTransfer | read-only | mandatory | This entry shows the number of disk transfers. |
| 1.3.6.1.4.1.1050.25.1.5.1.15 | ColumnbyteOfDiskTransfer | read-only | mandatory | This entry shows the total size of all disk transfers in bytes. |
| 1.3.6.1.4.1.1050.25.1.5.1.16 | ColumndeviceType | read-only | mandatory | This entry shows the device type. 0 : Unknown device 1 : Hard disk 2 : CD-ROM drive 3 : Tape drive |
| 1.3.6.1.4.1.1050.25.2 | Nodenic | |||
| 1.3.6.1.4.1.1050.25.2 | NodetrapTemperatureCritical | The agent will send a trap of this type when temperatures exceed the second level threshold value. | ||
| 1.3.6.1.4.1.1050.25.2.1 | ScalartotalNicCntrlNum | read-only | mandatory | This entry displays the number of network interface controllers (NIC) installed. |
| 1.3.6.1.4.1.1050.25.2.2 | TablenicControllerTable | not-accessible | mandatory | This entry is a table containing information about all NICs installed. |
| 1.3.6.1.4.1.1050.25.2.2.1 | RownicControllerEntry | not-accessible | mandatory | This entry contains generic information about each NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.1 | ColumnnicCntrlNum | read-only | mandatory | This entry is an index of the NIC table starting at 0. |
| 1.3.6.1.4.1.1050.25.2.2.1.2 | ColumnnicCntrlSlotNum | read-only | mandatory | This entry shows the slot number occupied by the NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.3 | ColumnnicCntrlIoPort | read-only | mandatory | This entry shows the IO port occupied by the NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.4 | ColumnnicCntrlDMA | read-only | mandatory | This entry shows the DMA channel occupied by the NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.5 | ColumnnicCntrlIntr | read-only | mandatory | This entry shows the interrupt number occupied by the NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.6 | ColumnnicCntrlSharedMem | read-only | mandatory | This entry shows the shared memory address used by the NIC. |
| 1.3.6.1.4.1.1050.25.2.2.1.8 | ColumnnicCntrlModel | read-only | mandatory | This entry shows the NIC model. |
| 1.3.6.1.4.1.1050.25.2.2.1.10 | ColumnnicCntrlType | read-only | mandatory | This entry shows the NIC type information such as Ethernet or Token Ring. |
| 1.3.6.1.4.1.1050.25.2.2.1.11 | ColumnnicMACAddress | read-only | mandatory | This entry shows the NIC hardware's six-byte address. |
| 1.3.6.1.4.1.1050.25.2.2.1.12 | ColumnnicMediaType | read-only | mandatory | This entry shows the NIC media type information: 1=Ethernet 2=Token-Ring |
| 1.3.6.1.4.1.1050.25.2.2.1.13 | ColumnnicInterfaceSpeed | read-only | mandatory | This entry shows the NIC interface speed information in byte/sec |
| 1.3.6.1.4.1.1050.25.2.3 | NodenwNic | |||
| 1.3.6.1.4.1.1050.25.2.3.1 | TablenwNicGenericCounterTable | not-accessible | mandatory | This entry is a table containing information about all groups of NetWare NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.3.1.1 | RownwNicGenericCounter | not-accessible | mandatory | This entry contains information about each group of NetWare NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.1 | ColumnnwNicNumRcvPkts | read-only | mandatory | This entry shows the number of received packets by the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.2 | ColumnnwNicNumRcvBytes | read-only | mandatory | This entry shows the number of received bytes by the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.3 | ColumnnwNicNumSndPkts | read-only | mandatory | This entry shows the number of sent packets from the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.4 | ColumnnwNicNumSndBytes | read-only | mandatory | This entry shows the number of sent bytes from the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.5 | ColumnnwNicNoEcbCount | read-only | mandatory | This entry shows the No ECB Available Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.6 | ColumnnwNicSndTooBigCnt | read-only | mandatory | This entry shows the Send Packet Too Big Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.7 | ColumnnwNicRcvPktOvlCnt | read-only | mandatory | This entry shows the Receive Packet Overflow Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.8 | ColumnnwNicRcvPktTooBigCnt | read-only | mandatory | This entry shows the Receive Packet Too Big Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.9 | ColumnnwNicRcvPktTooSmallCnt | read-only | mandatory | This entry shows the Receive Packet Too Small Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.10 | ColumnnwNicRcvPktMiscErr | read-only | mandatory | This entry shows the Receive Packet Miscellaneous Errors. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.11 | ColumnnwNicSndPktMiscErr | read-only | mandatory | This entry shows the Send Packet Miscellaneous Errors. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.12 | ColumnnwNicSndPktRetryCnt | read-only | mandatory | This entry shows the Send Packet Retry Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.13 | ColumnnwNicChkSumErr | read-only | mandatory | This entry shows the Checksum Errors. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.14 | ColumnnwNicRcvMismatchCnt | read-only | mandatory | This entry shows the Hardware Receive Mismatch Count. |
| 1.3.6.1.4.1.1050.25.2.3.1.1.15 | ColumnnwNicAdapterRstCnt | read-only | mandatory | This entry shows the Adapter Reset Count. |
| 1.3.6.1.4.1.1050.25.2.3.2 | TablenwNicGenericThresholdTable | not-accessible | mandatory | This entry is a table containing information about all groups of thresholds for NetWare NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.3.2.1 | RownwNicGenericThreshold | not-accessible | mandatory | This entry contains information about each group of thresholds for NetWare NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.1 | ColumnnwNicNumRcvPktsThreshold | read-write | mandatory | This entry shows the threshold setting of received packets by the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.2 | ColumnnwNicNumRcvBytesThreshold | read-write | mandatory | This entry shows the threshold setting of received bytes by the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.3 | ColumnnwNicNumSndPktsThreshold | read-write | mandatory | This entry shows the threshold setting of sent packets from the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.4 | ColumnnwNicNumSndBytesThreshold | read-write | mandatory | This entry shows the threshold setting of sent bytes from the LAN card. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.5 | ColumnnwNicNoEcbCountThreshold | read-write | mandatory | This entry shows the threshold setting of No ECB Available Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.6 | ColumnnwNicSndTooBigCntThreshold | read-write | mandatory | This entry shows the threshold setting of Send Packet Too Big Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.7 | ColumnnwNicRcvPktOvlCntThreshold | read-write | mandatory | This entry shows the threshold setting of Receive Packet Overflow Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.8 | ColumnnwNicRcvPktTooBigCntThreshold | read-write | mandatory | This entry shows the threshold setting of Receive Packet Too Big Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.9 | ColumnnwNicRcvPktTooSmallCntThreshold | read-write | mandatory | This entry shows the threshold setting of Receive Packet Too Small Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.10 | ColumnnwNicRcvPktMiscErrThreshold | read-write | mandatory | This entry shows the threshold setting of Receive Packet Miscellaneous Errors. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.11 | ColumnnwNicSndPktMiscErrThreshold | read-write | mandatory | This entry shows the threshold setting of Send Packet Miscellaneous Errors. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.12 | ColumnnwNicSndPktRetryCntThreshold | read-write | mandatory | This entry shows the threshold setting of Send Packet Retry Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.13 | ColumnnwNicChkSumErrThreshold | read-write | mandatory | This entry shows the threshold setting of Checksum Errors. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.14 | ColumnnwNicRcvMismatchCntThreshold | read-write | mandatory | This entry shows the threshold setting of Hardware Receive Mismatch Count. |
| 1.3.6.1.4.1.1050.25.2.3.2.1.15 | ColumnnwNicAdapterRstCntThreshold | read-write | mandatory | This entry shows the threshold setting of Adapter Reset Count. |
| 1.3.6.1.4.1.1050.25.2.3.3 | TablenwNicEthernetCounterTable | not-accessible | mandatory | This entry is a table containing information about all groups of NetWare NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.3.3.1 | RownwNicEthernetCounter | not-accessible | mandatory | This entry contains information about each group of NetWare NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.1 | ColumnnwNicSndOkSingleColliCnt | read-only | mandatory | This entry shows the Send OK Single Collision Count. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.2 | ColumnnwNicSndOkMultipleColliCnt | read-only | mandatory | This entry shows the Send OK Multiple Collision Count. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.3 | ColumnnwNicSndOkButDeferred | read-only | mandatory | This entry shows the Send OK But Deferred. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.4 | ColumnnwNicSndAbortLateColli | read-only | mandatory | This entry shows the Send Abort From Late Collision. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.5 | ColumnnwNicSndAbortExcessColli | read-only | mandatory | This entry shows the Send Abort From Excess Collisions. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.6 | ColumnnwNicSndAbortCarrierSense | read-only | mandatory | This entry shows the Send Abort From Carrier Sense. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.7 | ColumnnwNicSndAbortExcessDefer | read-only | mandatory | This entry shows the Send Abort From Excessive Deferral. |
| 1.3.6.1.4.1.1050.25.2.3.3.1.8 | ColumnnwNicRcvAbortFrameAlignment | read-only | mandatory | This entry shows the Receive Abort From Bad Frame Alignment. |
| 1.3.6.1.4.1.1050.25.2.3.4 | TablenwNicEthernetThresholdTable | not-accessible | mandatory | This entry is a table containing information about all groups of thresholds for NetWare NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.3.4.1 | RownwNicEthernetThreshold | not-accessible | mandatory | This entry contains information about each group of thresholds for NetWare NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.1 | ColumnnwNicSndOkSingleColliCntThreshold | read-write | mandatory | This entry shows the threshold setting of Send OK Single Collision Count. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.2 | ColumnnwNicSndOkMultipleColliCntThreshold | read-write | mandatory | This entry shows the threshold setting of Send OK Multiple Collision Count. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.3 | ColumnnwNicSndOkButDeferredThreshold | read-write | mandatory | This entry shows the threshold setting of Send OK But Deferred. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.4 | ColumnnwNicSndAbortLateColliThreshold | read-write | mandatory | This entry shows the threshold setting of Send Abort From Late Collision. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.5 | ColumnnwNicSndAbortExcessColliThreshold | read-write | mandatory | This entry shows the threshold setting of Send Abort From Excess Collisions. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.6 | ColumnnwNicSndAbortCarrierSenseThreshold | read-write | mandatory | This entry shows the threshold setting of Send Abort From Carrier Sense. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.7 | ColumnnwNicSndAbortExcessDeferThreshold | read-write | mandatory | This entry shows the threshold setting of Send Abort From Excessive Deferral. |
| 1.3.6.1.4.1.1050.25.2.3.4.1.8 | ColumnnwNicRcvAbortFrameAlignmentThreshold | read-write | mandatory | This entry shows the threshold setting of Receive Abort From Bad Frame Alignment. |
| 1.3.6.1.4.1.1050.25.2.3.5 | TablenwNicTokenRingCounterTable | not-accessible | mandatory | This entry is a table containing information about all groups of NetWare NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.3.5.1 | RownwNicTokenRingCounter | not-accessible | mandatory | This entry contains information about each group of NetWare NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.1 | ColumnnwNicACErrorCounter | read-only | mandatory | This entry shows the ACErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.2 | ColumnnwNicAbortDelimiterCounter | read-only | mandatory | This entry shows the AbortDelimiterCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.3 | ColumnnwNicBurstErrorCounter | read-only | mandatory | This entry shows the BurstErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.4 | ColumnnwNicFrameCopiedErrorCounter | read-only | mandatory | This entry shows the FrameCopiedErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.5 | ColumnnwNicFrequencyErrorCounter | read-only | mandatory | This entry shows the FrequencyErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.6 | ColumnnwNicInternalErrorCounter | read-only | mandatory | This entry shows the InternalErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.7 | ColumnnwNicLastRingStatus | read-only | mandatory | This entry shows the LastRingStatus. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.8 | ColumnnwNicLineErrorCounter | read-only | mandatory | This entry shows the LineErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.9 | ColumnnwNicLostFrameCounter | read-only | mandatory | This entry shows the LostFrameCounter. |
| 1.3.6.1.4.1.1050.25.2.3.5.1.10 | ColumnnwNicTokenErrorCounter | read-only | mandatory | This entry shows the TokenErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6 | TablenwNicTokenRingThresholdTable | not-accessible | mandatory | This entry is a table containing information about all groups of thresholds for NetWare NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.3.6.1 | RownwNicTokenRingThreshold | not-accessible | mandatory | This entry contains information about each group of thresholds for NetWare NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.1 | ColumnnwNicACErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of ACErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.2 | ColumnnwNicAbortDelimiterCounterThreshold | read-write | mandatory | This entry shows the threshold setting of AbortDelimiterCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.3 | ColumnnwNicBurstErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of BurstErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.4 | ColumnnwNicFrameCopiedErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of FrameCopiedErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.5 | ColumnnwNicFrequencyErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of FrequencyErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.6 | ColumnnwNicInternalErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of InternalErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.7 | ColumnnwNicLastRingStatusThreshold | read-write | mandatory | This entry shows the threshold setting of LastRingStatus. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.8 | ColumnnwNicLineErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of LineErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.9 | ColumnnwNicLostFrameCounterThreshold | read-write | mandatory | This entry shows the threshold setting of LostFrameCounter. |
| 1.3.6.1.4.1.1050.25.2.3.6.1.10 | ColumnnwNicTokenErrorCounterThreshold | read-write | mandatory | This entry shows the threshold setting of TokenErrorCounter. |
| 1.3.6.1.4.1.1050.25.2.4 | NodescoNic | |||
| 1.3.6.1.4.1.1050.25.2.4.1 | TablescoNicGenericCounterTable | not-accessible | mandatory | This entry is a table of SCO NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.4.1.1 | RowscoNicGenericCounter | not-accessible | mandatory | This entry contains information about each SCO NIC generic counter. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.1 | ColumnscoNicNumRcvPkts | read-only | mandatory | This entry is the current number of received packets in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.2 | ColumnscoNicNumRcvBytes | read-only | mandatory | This entry is the current number of received bytes in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.3 | ColumnscoNicNumSndPkts | read-only | mandatory | This entry is the current number of sent packets in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.4 | ColumnscoNicNumSndBytes | read-only | mandatory | This entry is the current number of sent bytes in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.5 | ColumnscoNicFrameDef | read-only | mandatory | This entry is a variable that registers the number of frames deferred due to data link traffic. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.6 | ColumnscoNicCollisions | read-only | mandatory | This entry is a variable that registers the number of total collisions in transmitted frames. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.7 | ColumnscoNicFrameColl | read-only | mandatory | This entry is a variable that registers the total collisions that occurred when a frame was being transmitted. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.8 | ColumnscoNicOFrameColl | read-only | mandatory | This entry is a variable that registers the number of collisions that occurred when a frame was not being transmitted (out-of-frame collisions). |
| 1.3.6.1.4.1.1050.25.2.4.1.1.9 | ColumnscoNicXsColl | read-only | mandatory | This entry is a variable that registers the number of frames dropped due to excessive collisions. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.10 | ColumnscoNicFrameNosr | read-only | mandatory | This entry is a variable that registers the number of frames dropped due to allocb failure. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.11 | ColumnscoNicNoResource | read-only | mandatory | This entry is the number of frames dropped due to no resource. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.12 | ColumnscoNicBadSum | read-only | mandatory | This entry is a variable that registers the number of received frames with a bad checksum. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.13 | ColumnscoNicAlign | read-only | mandatory | This entry is a variable that registers the number of received frames with alignment errors. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.14 | ColumnscoNicBadLen | read-only | mandatory | This entry is a variable that registers the number of received frames with a bad length. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.15 | ColumnscoNicBadSap | read-only | mandatory | This entry is a variable that registers the number of frames received with no receiver above who desires to see those packets. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.16 | ColumnscoNicMcastRjct | read-only | mandatory | This entry is a variable that registers the number of multicast frames received that were not in the multicast table. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.17 | ColumnscoNicCarrier | read-only | mandatory | This entry is a variable that registers the number of transmitted frames aborted due to carrier loss during transmission. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.18 | ColumnscoNicBadCts | read-only | mandatory | This entry is a variable that registers the number of transmitted frames aborted due to loss of the CTS signal during transmission. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.19 | ColumnscoNicBadDma | read-only | mandatory | This entry is a variable that registers the number of DMA over/under runs. |
| 1.3.6.1.4.1.1050.25.2.4.1.1.20 | ColumnscoNicTimeOuts | read-only | mandatory | This entry is the number of device timeouts. |
| 1.3.6.1.4.1.1050.25.2.4.2 | TablescoNicGenericThresholdTable | not-accessible | mandatory | This entry is a table of SCO NIC generic threshold values. |
| 1.3.6.1.4.1.1050.25.2.4.2.1 | RowscoNicGenericThreshold | not-accessible | mandatory | This entry is the threshold value for each SCO NIC generic counter. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.1 | ColumnscoNicNumRcvPktsThreshold | read-write | mandatory | This entry is the current threshold value of received packets in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.2 | ColumnscoNicNumRcvBytesThreshold | read-write | mandatory | This entry is the current threshold value of received bytes in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.3 | ColumnscoNicNumSndPktsThreshold | read-write | mandatory | This entry is the current threshold value of sent packets in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.4 | ColumnscoNicNumSndBytesThreshold | read-write | mandatory | This entry is the current threshold value of sent bytes in this NIC card. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.5 | ColumnscoNicFrameDefThreshold | read-write | mandatory | This entry is the current threshold value for deferred frames. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.6 | ColumnscoNicCollisionsThreshold | read-write | mandatory | This entry is the current threshold value of total collisions. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.7 | ColumnscoNicFrameCollThreshold | read-write | mandatory | This entry is the current threshold value of frames involved in a collision. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.8 | ColumnscoNicOFrameCollThreshold | read-write | mandatory | This entry is the current threshold value for out of frame collisions. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.9 | ColumnscoNicXsCollThreshold | read-write | mandatory | This entry is the current threshold value of frames dropped due to excessive collisions. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.10 | ColumnscoNicFrameNosrThreshold | read-write | mandatory | This entry is the current threshold value of frames dropped due to no streams. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.11 | ColumnscoNicNoResourceThreshold | read-write | mandatory | This entry is the current threshold value of frames dropped due to no resource. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.12 | ColumnscoNicBadSumThreshold | read-write | mandatory | This entry is the current threshold value of bad checksums received. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.13 | ColumnscoNicAlignThreshold | read-write | mandatory | This entry is the current threshold value of bad alignment received. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.14 | ColumnscoNicBadLenThreshold | read-write | mandatory | This entry is the current threshold value of bad length received. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.15 | ColumnscoNicBadSapThreshold | read-write | mandatory | This entry is the current threshold value of bad SAP received. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.16 | ColumnscoNicMcastRjctThreshold | read-write | mandatory | This entry is the current threshold value of multicast frames rejected. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.17 | ColumnscoNicCarrierThreshold | read-write | mandatory | This entry is the current threshold value of errors due to lost carriers. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.18 | ColumnscoNicBadCtsThreshold | read-write | mandatory | This entry is the current threshold value of errors due to lost CTS. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.19 | ColumnscoNicBadDmaThreshold | read-write | mandatory | This entry is the current threshold value of DMA over/under runs. |
| 1.3.6.1.4.1.1050.25.2.4.2.1.20 | ColumnscoNicTimeOutsThreshold | read-write | mandatory | This entry is the current threshold value for device timeouts. |
| 1.3.6.1.4.1.1050.25.2.5 | NodentNic | |||
| 1.3.6.1.4.1.1050.25.2.5.1 | TablentNicGenericCounterTable | not-accessible | mandatory | This entry is a table of Windows NT NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.5.1.1 | RowntNicGenericCounter | not-accessible | mandatory | This entry contains information about each Windows NT NIC generic counter. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.1 | ColumnntNicCntFrameXmitOk | read-only | mandatory | This entry is the number of frames transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.2 | ColumnntNicCntFrameRcvOk | read-only | mandatory | This entry is the number of frames the NIC received with no errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.3 | ColumnntNicCntFrameXmitErr | read-only | mandatory | This entry is the number of frames the NIC fails to transmit. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.4 | ColumnntNicCntFrameRcvErr | read-only | mandatory | This entry is the number of frames the NIC receives but is abandoned due to errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.5 | ColumnntNicCntRcvFailNoBuf | read-only | mandatory | This entry is the number of frames the NIC cannot receive due to lack of buffer space. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.6 | ColumnntNicCntDirByteXmit | read-only | mandatory | This entry is the number of bytes in directed packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.7 | ColumnntNicCntDirPktXmit | read-only | mandatory | This entry is the number of directed packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.8 | ColumnntNicCntMulCastByteXmit | read-only | mandatory | This entry is the number of bytes in multicast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.9 | ColumnntNicCntMulCastPktXmit | read-only | mandatory | This entry is the number of multicast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.10 | ColumnntNicCntBrdCastByteXmit | read-only | mandatory | This entry is the number of bytes in broadcast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.11 | ColumnntNicCntBrdCastPktXmit | read-only | mandatory | This entry is the number of broadcast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.12 | ColumnntNicCntDirByteRcv | read-only | mandatory | This entry is the number of bytes in directed packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.13 | ColumnntNicCntDirPktRcv | read-only | mandatory | This entry is the number of directed packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.14 | ColumnntNicCntMulCastByteRcv | read-only | mandatory | This entry is the number of bytes in multicast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.15 | ColumnntNicCntMulCastPktRcv | read-only | mandatory | This entry is the number of multicast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.16 | ColumnntNicCntBrdCastByteRcv | read-only | mandatory | This entry is the number of bytes in broadcast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.17 | ColumnntNicCntBrdCastPktRcv | read-only | mandatory | This entry is the number of broadcast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.18 | ColumnntNicCntFrameRcvCRCErr | read-only | mandatory | This entry is the number of frames received with checksum errors. |
| 1.3.6.1.4.1.1050.25.2.5.1.1.19 | ColumnntNicXmitQueueLength | read-only | mandatory | This entry is the number of packets the NIC driver queues for transmission. |
| 1.3.6.1.4.1.1050.25.2.5.2 | TablentNicGenericThresholdTable | not-accessible | mandatory | This entry is a table of threshold values for Windows NT NIC generic counters. |
| 1.3.6.1.4.1.1050.25.2.5.2.1 | RowntNicGenericThreshold | not-accessible | mandatory | This entry contains the threshold value for each Windows NT NIC generic counter. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.1 | ColumnntNicTldFrameXmitOk | read-write | mandatory | This entry is the threshold value of frames transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.2 | ColumnntNicTldFrameRcvOk | read-write | mandatory | This entry is the threshold value of frames the NIC receives with no errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.3 | ColumnntNicTldFrameXmitErr | read-write | mandatory | This entry is the threshold value of frames the NIC fails to transmit. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.4 | ColumnntNicTldFrameRcvErr | read-write | mandatory | This entry is the threshold value of frames the NIC receives but are abandoned due to errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.5 | ColumnntNicTldRcvFailNoBuf | read-write | mandatory | This entry is the threshold value of frames the NIC cannot receive due to lack of buffer space. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.6 | ColumnntNicTldDirByteXmit | read-write | mandatory | This entry is the threshold value of bytes in directed packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.7 | ColumnntNicTldDirPktXmit | read-write | mandatory | This entry is the threshold value of directed packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.8 | ColumnntNicTldMulCastByteXmit | read-write | mandatory | This entry is the threshold value of bytes in multicast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.9 | ColumnntNicTldMulCastPktXmit | read-write | mandatory | This entry is the threshold value of multicast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.10 | ColumnntNicTldBrdCastByteXmit | read-write | mandatory | This entry is the threshold value of bytes in broadcast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.11 | ColumnntNicTldBrdCastPktXmit | read-write | mandatory | This entry is the threshold value of broadcast packets transmitted without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.12 | ColumnntNicTldDirByteRcv | read-write | mandatory | This entry is the threshold value of bytes in directed packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.13 | ColumnntNicTldDirPktRcv | read-write | mandatory | This entry is the threshold value of directed packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.14 | ColumnntNicTldMulCastByteRcv | read-write | mandatory | This entry is the threshold value of bytes in multicast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.15 | ColumnntNicTldMulCastPktRcv | read-write | mandatory | This entry is the threshold value of multicast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.16 | ColumnntNicTldBrdCastByteRcv | read-write | mandatory | This entry is the threshold value of bytes in broadcast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.17 | ColumnntNicTldBrdCastPktRcv | read-write | mandatory | This entry is the threshold value of broadcast packets received without errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.18 | ColumnntNicTldFrameRcvCRCErr | read-write | mandatory | This entry is the threshold value of frames received with checksum errors. |
| 1.3.6.1.4.1.1050.25.2.5.2.1.19 | ColumnntNicTldXmitQueueLength | read-write | mandatory | This entry is the threshold value of packets the NIC driver queues for transmission. |
| 1.3.6.1.4.1.1050.25.2.5.3 | TablentNicEthernetCounterTable | not-accessible | mandatory | This entry is a table of Windows NT NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.5.3.1 | RowntNicEthernetCounter | not-accessible | mandatory | This entry contains information about each Windows NT NIC Ethernet counter. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.1 | ColumnntNicCntRcvFrameAlignErr | read-only | mandatory | This entry is the number of frames received with alignment errors. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.2 | ColumnntNicCntXmitOkOneCollision | read-only | mandatory | This entry is the number of frames successfully transmitted after exactly one collision. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.3 | ColumnntNicCntXmitOkMoreCollision | read-only | mandatory | This entry is the number of frames successfully transmitted after more than one collision. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.4 | ColumnntNicCntXmitOkDeffered | read-only | mandatory | This entry is the number of frames successfully transmitted after the NIC defers transmission at least once. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.5 | ColumnntNicCntXmitFailMaxCollision | read-only | mandatory | This entry is the number of frames not transmitted due to excessive collisions. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.6 | ColumnntNicCntRcvErrOverrun | read-only | mandatory | This entry is the number of frames not received due to over-run errors. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.7 | ColumnntNicCntXmitErrUnderrun | read-only | mandatory | This entry is the number of frames not transmitted due to under-run errors. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.8 | ColumnntNicCntXmitHeartbeat | read-only | mandatory | This entry is the number of frames successfully transmitted without detection of the collision-detect heartbeat. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.9 | ColumnntNicCntTimesCRSLost | read-only | mandatory | This entry is the number of times the CRS signal has been lost during packet transmission. |
| 1.3.6.1.4.1.1050.25.2.5.3.1.10 | ColumnntNicCntXmitLateCollision | read-only | mandatory | This entry is the number of collisions detected after the normal window. |
| 1.3.6.1.4.1.1050.25.2.5.4 | TablentNicEthernetThresholdTable | not-accessible | mandatory | This entry is a table of threshold values for Windows NT NIC Ethernet counters. |
| 1.3.6.1.4.1.1050.25.2.5.4.1 | RowntNicEthernetThreshold | not-accessible | mandatory | This entry contains the threshold value for each Windows NT NIC Ethernet counter. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.1 | ColumnntNicTldRcvFrameAlignErr | read-write | mandatory | This entry is the threshold value of frames received with alignment errors. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.2 | ColumnntNicTldXmitOkOneCollision | read-write | mandatory | This entry is the threshold value of frames successfully transmitted after exactly one collision. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.3 | ColumnntNicTldXmitOkMoreCollision | read-write | mandatory | This entry is the threshold value of frames successfully transmitted after more than one collision. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.4 | ColumnntNicTldXmitOkDeffered | read-write | mandatory | This entry is the threshold value of frames successfully transmitted after the NIC defers transmission at least once. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.5 | ColumnntNicTldXmitFailMaxCollision | read-write | mandatory | This entry is the threshold value of frames not transmitted due to excessive collisions. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.6 | ColumnntNicTldRcvErrOverrun | read-write | mandatory | This entry is the threshold value of frames not received due to over-run errors. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.7 | ColumnntNicTldXmitErrUnderrun | read-write | mandatory | This entry is the threshold value of frames not transmitted due to under-run errors. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.8 | ColumnntNicTldXmitHeartbeat | read-write | mandatory | This entry is the threshold value of frames successfully transmitted without detection of the collision-detect heartbeat. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.9 | ColumnntNicTldTimesCRSLost | read-write | mandatory | This entry is the threshold value for the number of times the CRS signal has been lost during packet transmission. |
| 1.3.6.1.4.1.1050.25.2.5.4.1.10 | ColumnntNicTldXmitLateCollision | read-write | mandatory | This entry is the threshold value of collisions detected after the normal window. |
| 1.3.6.1.4.1.1050.25.2.5.5 | TablentNicTokenRingCounterTable | not-accessible | mandatory | This entry is a table of Windows NT NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.5.5.1 | RowntNicTokenRingCounter | not-accessible | mandatory | This entry contains information about each Windows NT NIC Token Ring counter. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.1 | ColumnntNicCntACError | read-only | mandatory | This entry is the number of frames with A/C errors. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.2 | ColumnntNicCntAbortDelimiter | read-only | mandatory | This entry is the number of abort delimiters transmitted. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.3 | ColumnntNicCntBurstError | read-only | mandatory | This entry is the number of frames containing five half bits with no transition. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.4 | ColumnntNicCntFrameCopiedError | read-only | mandatory | This entry is the number of frames addressed to the network interface card that another NIC on the ring has also copied. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.5 | ColumnntNicCntFrequencyError | read-only | mandatory | This entry is the number of frequency errors on the ring. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.6 | ColumnntNicCntInternalError | read-only | mandatory | This entry is the number of internal errors the NIC has detected. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.7 | ColumnntNicCntLastRingStatus | read-only | mandatory | This entry is an NDIS_STATUS_RING_STATUS code indicates the last ring status. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.8 | ColumnntNicCntLineError | read-only | mandatory | This entry is the number of frames with an invalid FCS or a code violation. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.9 | ColumnntNicCntLostFrame | read-only | mandatory | This entry is the number of frames transmitted that have not circled the ring within the maximum ring latency. |
| 1.3.6.1.4.1.1050.25.2.5.5.1.10 | ColumnntNicCntTokenError | read-only | mandatory | This entry is the number of times the NIC has been the active monitor and has had to recreate. |
| 1.3.6.1.4.1.1050.25.2.5.6 | TablentNicTokenRingThresholdTable | not-accessible | mandatory | This entry is a table of threshold values for Windows NT NIC Token Ring counters. |
| 1.3.6.1.4.1.1050.25.2.5.6.1 | RowntNicTokenRingThreshold | not-accessible | mandatory | This entry contains the threshold value for each Windows NT NIC Token Ring counter. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.1 | ColumnntNicTldACError | read-write | mandatory | This entry is the threshold value of frames with A/C errors. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.2 | ColumnntNicTldAbortDelimiter | read-write | mandatory | This entry is the threshold value of abort delimiters transmitted. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.3 | ColumnntNicTldBurstError | read-write | mandatory | This entry is the threshold value of frames containing five half bits with no transition. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.4 | ColumnntNicTldFrameCopiedError | read-write | mandatory | This entry is the threshold value of frames addressed to the network interface card that another NIC on the ring has also copied. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.5 | ColumnntNicTldFrequencyError | read-write | mandatory | This entry is the threshold value of frequency errors on the ring. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.6 | ColumnntNicTldInternalError | read-write | mandatory | This entry is the threshold value of internal errors the NIC has detected. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.7 | ColumnntNicTldLastRingStatus | read-write | mandatory | This entry is the threshold value of the last ring status. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.8 | ColumnntNicTldLineError | read-write | mandatory | This entry is the threshold value of the number of frames with an invalid FCS or a code violation. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.9 | ColumnntNicTldLostFrame | read-write | mandatory | This entry is the threshold value for the number of frames transmitted that have not circled the ring within the maximum ring latency. |
| 1.3.6.1.4.1.1050.25.2.5.6.1.10 | ColumnntNicTldTokenError | read-write | mandatory | This entry is the threshold value for the number of times the NIC has been the active monitor and has had to recreate. |
| 1.3.6.1.4.1.1050.25.2.6 | ScalarglbThldNicByte | read-write | mandatory | This entry is the global threshold setting for NIC received/transmitted bytes. Default is 100Mbps/8 = 12500000. |
| 1.3.6.1.4.1.1050.25.2.7 | ScalarglbThldNicPacket | read-write | mandatory | This entry is the global threshold setting for NIC received/transmitted packets. Default is 100Mbps/8/50 = 250000. |
| 1.3.6.1.4.1.1050.25.2.8 | ScalarglbThldNicFault | read-write | mandatory | This entry is the global threshold setting for NIC fault counters. Default is 0xFFFFFFFF, therefore, no SNMP traps will be sent. |
| 1.3.6.1.4.1.1050.25.3 | NodesystemBoard | |||
| 1.3.6.1.4.1.1050.25.3 | NodetrapECC1BitError | The agent will send a trap of this type when an ECC 1-bit error occurs. | ||
| 1.3.6.1.4.1.1050.25.3.1 | TablesystemIrqsInfoTable | not-accessible | mandatory | This entry is a table containing IRQ numbers and the devices occupying each IRQ. |
| 1.3.6.1.4.1.1050.25.3.1.1 | RowsystemIrqsInfoEntry | not-accessible | mandatory | This entry contains information about each IRQ. |
| 1.3.6.1.4.1.1050.25.3.1.1.1 | ColumnirqNumber | read-only | mandatory | This entry is the IRQ number. |
| 1.3.6.1.4.1.1050.25.3.1.1.2 | ColumnirqOccupiedDes | read-only | mandatory | This entry contains information about the device occupying the IRQ. |
| 1.3.6.1.4.1.1050.25.3.2 | TablesystemDmasInfoTable | not-accessible | mandatory | This entry is a table containing DMA channels and the devices occupying each channel. |
| 1.3.6.1.4.1.1050.25.3.2.1 | RowsystemDmasInfoEntry | not-accessible | mandatory | This entry contains information about each DMA channel. |
| 1.3.6.1.4.1.1050.25.3.2.1.1 | ColumndmaChannel | read-only | mandatory | This entry is the DMA channel. |
| 1.3.6.1.4.1.1050.25.3.2.1.2 | ColumndmaOccupiedDes | read-only | mandatory | This entry contains information about the device occupying the DMA channel. |
| 1.3.6.1.4.1.1050.25.3.3 | ScalartotalIoPortsNum | read-only | mandatory | This entry shows the number of I/O ports. |
| 1.3.6.1.4.1.1050.25.3.4 | TablesystemIoPortsInfoTable | not-accessible | mandatory | This entry is a table containing I/O port information and the devices occupying each port. |
| 1.3.6.1.4.1.1050.25.3.4.1 | RowsystemIoPortsInfoEntry | not-accessible | mandatory | This entry contains information about each I/O port. |
| 1.3.6.1.4.1.1050.25.3.4.1.1 | ColumnioPortsIndex | read-only | mandatory | This entry is an index to the I/O port table. |
| 1.3.6.1.4.1.1050.25.3.4.1.2 | ColumnioPortsBeginValue | read-only | mandatory | This entry shows the starting address of the I/O port. |
| 1.3.6.1.4.1.1050.25.3.4.1.3 | ColumnioPortsEndValue | read-only | mandatory | This entry shows the ending address of the I/O port. |
| 1.3.6.1.4.1.1050.25.3.4.1.4 | ColumnioPortsOccupiedDes | read-only | mandatory | This entry contains information about the I/O device occupying the port. |
| 1.3.6.1.4.1.1050.25.3.5 | TablesystemSlotsInfoTable | not-accessible | mandatory | This entry is a table containing information about system slots. |
| 1.3.6.1.4.1.1050.25.3.5.1 | RowsystemSlotsInfoEntry | not-accessible | mandatory | This entry contains information about each system slot. |
| 1.3.6.1.4.1.1050.25.3.5.1.1 | ColumnslotsNumber | read-only | mandatory | This entry shows the slot number. |
| 1.3.6.1.4.1.1050.25.3.5.1.2 | ColumnslotsType | read-only | mandatory | This entry shows the slot type, EISA, ISA, or PCI. 0 = Unknown 1 = EISA 3 = ISA 5 = PCI |
| 1.3.6.1.4.1.1050.25.3.5.1.3 | ColumnslotsOccupiedDes | read-only | mandatory | This entry shows the device installed on this slot. |
| 1.3.6.1.4.1.1050.25.3.6 | ScalartotalMemSlotsNum | read-only | mandatory | This entry shows the number of SIMM slots. |
| 1.3.6.1.4.1.1050.25.3.7 | TablememoryTable | not-accessible | mandatory | This entry is a table containing system memory information. |
| 1.3.6.1.4.1.1050.25.3.7.1 | RowmemoryEntry | not-accessible | mandatory | This entry contains information about each SIMM slot. |
| 1.3.6.1.4.1.1050.25.3.7.1.1 | ColumnmemSlots | read-only | mandatory | This entry contains information about the memory module installed on the SIMM slot. |
| 1.3.6.1.4.1.1050.25.3.7.1.2 | ColumnsimmType | read-only | mandatory | This entry shows the memory module size in MB. |
| 1.3.6.1.4.1.1050.25.3.11 | ScalarsystemBootControl | read-only | mandatory | This entry shows boot control information. |
| 1.3.6.1.4.1.1050.25.3.12 | ScalarsystemFloppyControl | read-only | mandatory | This entry shows diskette drive control information. |
| 1.3.6.1.4.1.1050.25.3.13 | ScalarsystemHddControl | read-only | mandatory | This entry shows hard disk control information. |
| 1.3.6.1.4.1.1050.25.3.14 | ScalartotalBaseMemNum | read-only | mandatory | This entry shows the number of base memory blocks used by I/O devices. |
| 1.3.6.1.4.1.1050.25.3.15 | TablesystemBaseMemTable | not-accessible | mandatory | This entry is a table containing information about base memory used by I/O devices. |
| 1.3.6.1.4.1.1050.25.3.15.1 | RowsystemBaseMemEntry | not-accessible | mandatory | This entry contains information about each base memory block. |
| 1.3.6.1.4.1.1050.25.3.15.1.1 | ColumnbaseMemIndex | read-only | mandatory | This entry is an index to the base memory table. |
| 1.3.6.1.4.1.1050.25.3.15.1.2 | ColumnbaseMemAddr | read-only | mandatory | This entry shows the starting address of the block of base memory used. |
| 1.3.6.1.4.1.1050.25.3.15.1.3 | ColumnbaseMemLength | read-only | mandatory | This entry shows the length of the block of base memory used. |
| 1.3.6.1.4.1.1050.25.3.15.1.4 | ColumnbaseMemOccupiedDes | read-only | mandatory | This entry contains a description of the device using the block of base memory. |
| 1.3.6.1.4.1.1050.25.4 | NodeserverEnvrm | |||
| 1.3.6.1.4.1.1050.25.4 | NodetrapECCMBitError | The agent will send a trap of this type when an ECC multiple-bit error occurs. | ||
| 1.3.6.1.4.1.1050.25.4.1 | ScalarproductName | read-only | mandatory | This entry shows the machine product name. |
| 1.3.6.1.4.1.1050.25.4.2 | ScalarosVersion | read-only | mandatory | This entry shows information about the current operating system in use. |
| 1.3.6.1.4.1.1050.25.4.3 | ScalarexpanBusType | read-only | mandatory | This entry shows information about expansion slots. A system may contain one or more of the following types: ISA, EISA, PCI, VESA, etc. |
| 1.3.6.1.4.1.1050.25.4.4 | ScalarprocessorType | read-only | mandatory | This entry shows the server's CPU information. |
| 1.3.6.1.4.1.1050.25.4.5 | ScalarsystemIntrlCache | read-only | mandatory | This entry shows the CPU's internal cache size in KB. |
| 1.3.6.1.4.1.1050.25.4.6 | ScalarsystemExtrlCache | read-only | mandatory | This shows the server's external cache size in KB. |
| 1.3.6.1.4.1.1050.25.4.7 | ScalarsystemTotalMemory | read-only | mandatory | This entry shows the system's total memory size in bytes. |
| 1.3.6.1.4.1.1050.25.4.8 | ScalarsystemFreeMemory | read-only | mandatory | This entry shows the system's current free memory size in bytes. |
| 1.3.6.1.4.1.1050.25.4.9 | ScalarsystemSerialPort1Info | read-only | mandatory | This entry contains information about the system's serial port 1. |
| 1.3.6.1.4.1.1050.25.4.10 | ScalarsystemSerialPort2Info | read-only | mandatory | This entry contains information about the system's serial port 2. |
| 1.3.6.1.4.1.1050.25.4.11 | ScalarsystemParallelPortInfo | read-only | mandatory | This entry contains information about the system's parallel port. |
| 1.3.6.1.4.1.1050.25.4.12 | ScalarkeyboardType | read-only | mandatory | This entry shows the system's keyboard type. |
| 1.3.6.1.4.1.1050.25.4.13 | ScalarvideoType | read-only | mandatory | This entry shows the system's display type. |
| 1.3.6.1.4.1.1050.25.4.14 | ScalarmouseType | read-only | mandatory | This entry shows the system's mouse type. |
| 1.3.6.1.4.1.1050.25.4.15 | ScalarsysBiosVer | read-only | mandatory | This entry shows the system BIOS version. |
| 1.3.6.1.4.1.1050.25.4.16 | ScalarserverName | read-only | mandatory | This entry shows the server name. |
| 1.3.6.1.4.1.1050.25.4.17 | ScalarserverUpTime | read-only | mandatory | This entry shows the amount of time the server has been running. |
| 1.3.6.1.4.1.1050.25.4.18 | TableserverMgrContactInfoTable | not-accessible | mandatory | This entry is a table containing information about all server managers. |
| 1.3.6.1.4.1.1050.25.4.18.1 | RowserverMgrContactInfoEntry | not-accessible | mandatory | This entry shows information about each server manager. |
| 1.3.6.1.4.1.1050.25.4.18.1.1 | ColumnserverMgrName | read-write | mandatory | This entry shows the server manager's name. |
| 1.3.6.1.4.1.1050.25.4.18.1.2 | ColumnserverMgrOffPhone | read-write | mandatory | This entry shows the server manager's office phone number. |
| 1.3.6.1.4.1.1050.25.4.18.1.3 | ColumnserverMgrOffAddr | read-write | mandatory | This entry shows the server manager's office address. |
| 1.3.6.1.4.1.1050.25.4.18.1.4 | ColumnserverMgrHomePhone | read-write | mandatory | This entry shows the server manager's home phone number. |
| 1.3.6.1.4.1.1050.25.4.18.1.5 | ColumnserverMgrHomeAddr | read-write | mandatory | This entry shows the server manager's home address. |
| 1.3.6.1.4.1.1050.25.4.18.1.6 | ColumnserverMgrPagerNum | read-write | mandatory | This entry shows the server manager's pager number. |
| 1.3.6.1.4.1.1050.25.4.18.1.7 | ColumnserverMgrEmailAddr | read-write | mandatory | This entry shows the server manager's email address. |
| 1.3.6.1.4.1.1050.25.4.18.1.8 | ColumnserverMgrNumber | read-only | mandatory | This entry is the server manager number starting from 0. |
| 1.3.6.1.4.1.1050.25.4.19 | ScalarserverLoc | read-write | mandatory | This entry shows the server's physical location. |
| 1.3.6.1.4.1.1050.25.4.20 | ScalartotalSysVolNum | read-only | mandatory | This entry shows the total number of system volumes. |
| 1.3.6.1.4.1.1050.25.4.21 | TablesysVolTable | not-accessible | mandatory | This entry is a table containing information about all system volumes. |
| 1.3.6.1.4.1.1050.25.4.21.1 | RowsysVolEntry | not-accessible | mandatory | This entry shows information about each system volume. |
| 1.3.6.1.4.1.1050.25.4.21.1.1 | ColumnsysVolNum | read-only | mandatory | This entry is the volume number. |
| 1.3.6.1.4.1.1050.25.4.21.1.2 | ColumnsysVolName | read-only | mandatory | This entry shows the system volume name. |
| 1.3.6.1.4.1.1050.25.4.21.1.3 | ColumntotalVolSize | read-only | mandatory | This entry shows the size of each system volume in KB. |
| 1.3.6.1.4.1.1050.25.4.21.1.4 | ColumnfreeVolSize | read-only | mandatory | This entry shows the current free size of a system volume in KB. |
| 1.3.6.1.4.1.1050.25.4.21.1.5 | ColumntotalDirSize | read-only | mandatory | For NetWare, this entry shows the maximum number of directories that can be created in a system volume. For Windows NT, this entry shows the number of allocati… |
| 1.3.6.1.4.1.1050.25.4.21.1.6 | ColumnfreeDirSize | read-only | mandatory | For NetWare, this entry shows the current number of directories that can still be created in a system volume. For Windows NT, this entry shows the current numb… |
| 1.3.6.1.4.1.1050.25.4.21.1.7 | ColumnusedVolSizeThreshold | read-write | mandatory | This entry shows the threshold setting (%) for a volume's usage. |
| 1.3.6.1.4.1.1050.25.4.22 | ScalartotalSysPartitionNum | read-only | mandatory | This entry shows the total number of NetWare partitions created in the system. |
| 1.3.6.1.4.1.1050.25.4.23 | TablesysPartitionTable | not-accessible | mandatory | This entry is a table containing information about all NetWare partitions in the system. |
| 1.3.6.1.4.1.1050.25.4.23.1 | RowsysPartitionEntry | not-accessible | mandatory | This entry contains information about each NetWare partition. |
| 1.3.6.1.4.1.1050.25.4.23.1.1 | ColumnsysPartitionNum | read-only | mandatory | This entry shows the system partition number assigned by the system. |
| 1.3.6.1.4.1.1050.25.4.23.1.2 | ColumnpartitionDiskNum | read-only | mandatory | This entry shows the disk number from which this partition is created. |
| 1.3.6.1.4.1.1050.25.4.23.1.3 | ColumndataAreaSize | read-only | mandatory | This entry shows the size of the partition's data area in sectors. |
| 1.3.6.1.4.1.1050.25.4.23.1.4 | ColumnredirectionAreaSize | read-only | mandatory | This entry shows the size of the partition's redirection area in sectors. |
| 1.3.6.1.4.1.1050.25.4.23.1.5 | ColumnredirectedSize | read-only | mandatory | This entry shows the number of sectors used in the partition's redirection area. |
| 1.3.6.1.4.1.1050.25.4.23.1.6 | ColumnpartitionName | read-only | mandatory | This entry shows the partition name. |
| 1.3.6.1.4.1.1050.25.4.27 | ScalarsoftPollingInterval | read-write | mandatory | This entry shows the soft polling interval in seconds. By soft polling, it means that the Agent polls the system status (CPU Utilization, Memory Utilization, V… |
| 1.3.6.1.4.1.1050.25.4.28 | ScalarglbThldVolUtil | read-write | mandatory | This entry shows the global threshold value (%) for volume or file system utilization. Default is 100%. |
| 1.3.6.1.4.1.1050.25.4.29 | ScalarnumberOfCpu | read-only | mandatory | This entry shows the number of CPUs in the system. |
| 1.3.6.1.4.1.1050.25.4.30 | TablecpuInfoTable | not-accessible | mandatory | This entry is a table containing information about all CPUs on the system. |
| 1.3.6.1.4.1.1050.25.4.30.1 | RowcpuInfo | not-accessible | mandatory | This entry shows information about each CPU. |
| 1.3.6.1.4.1.1050.25.4.30.1.1 | ColumncpuNum | read-only | mandatory | This entry shows the CPU number starting at 0. |
| 1.3.6.1.4.1.1050.25.4.30.1.2 | ColumncpuUtilization | read-only | mandatory | This entry shows CPU utilization (%). |
| 1.3.6.1.4.1.1050.25.4.30.1.9 | ColumncpuSystemUtilization | read-only | mandatory | This entry shows CPU utilization (%) by the operating system. |
| 1.3.6.1.4.1.1050.25.4.30.1.10 | ColumncpuUserUtilization | read-only | mandatory | This entry shows CPU utilization (%) by applications. |
| 1.3.6.1.4.1.1050.25.4.30.1.11 | ColumncpuInterruptUtilization | read-only | mandatory | This entry shows CPU utilization (%) by the interrupt services. |
| 1.3.6.1.4.1.1050.25.4.42 | ScalarmgmtStationAddrSignIn | read-write | mandatory | This entry is the sign-in IPX address of the management station. |
| 1.3.6.1.4.1.1050.25.4.43 | ScalarmgmtStationAddrSignOut | read-write | mandatory | This entry is the sign-out IPX address of the management station. |
| 1.3.6.1.4.1.1050.25.4.44 | ScalarserverTemp1Threshold | read-write | mandatory | This entry displays the first level threshold value for the system temperature. Values displayed have to be divided by ten (10) to show the temperature in degr… |
| 1.3.6.1.4.1.1050.25.4.45 | ScalarserverTemp2Threshold | read-write | mandatory | This entry displays the second level threshold value for the CPU temperature. Values displayed have to be divided by ten (10) to show the temperature in degree… |
| 1.3.6.1.4.1.1050.25.4.46 | ScalarserverCpuUtilizationThreshold | read-write | mandatory | This entry shows the threshold value (%) for the CPU utilization. |
| 1.3.6.1.4.1.1050.25.4.47 | ScalarhostIOBusUtilizationThreshold | read-write | mandatory | This entry displays the threshold value for bus utilization. Values displayed have to be divided by one hundred (100) to show the percentage of bus utilization… |
| 1.3.6.1.4.1.1050.25.4.48 | ScalarmemoryUtilizedThreshold | read-write | mandatory | This entry shows the threshold value (%) for memory utilization. |
| 1.3.6.1.4.1.1050.25.4.53 | ScalartotalSysFSNum | read-only | mandatory | This entry is the total number of SCO UNIX file systems. |
| 1.3.6.1.4.1.1050.25.4.54 | TablesysFSTable | not-accessible | mandatory | This entry is a table containing all SCO UNIX file system information. |
| 1.3.6.1.4.1.1050.25.4.54.1 | RowsysFSEntry | not-accessible | mandatory | This entry contains information about each SCO UNIX file system. |
| 1.3.6.1.4.1.1050.25.4.54.1.1 | ColumnsysFSNumber | read-only | mandatory | This entry is an index of file systems information. |
| 1.3.6.1.4.1.1050.25.4.54.1.2 | ColumnsysFSName | read-only | mandatory | This entry is the file system name. |
| 1.3.6.1.4.1.1050.25.4.54.1.3 | ColumntotalFSSize | read-only | mandatory | This entry is the total size of a file system in KB. |
| 1.3.6.1.4.1.1050.25.4.54.1.4 | ColumnfreeFSSize | read-only | mandatory | This entry is the current free size of a file system in KB. |
| 1.3.6.1.4.1.1050.25.4.54.1.5 | ColumnusedFSSizeThreshold | read-write | mandatory | This entry is the threshold value (%) of the file system currently in use. |
| 1.3.6.1.4.1.1050.25.4.54.1.6 | ColumntotalFSinode | read-only | mandatory | This entry is the total inode counts of a file system. |
| 1.3.6.1.4.1.1050.25.4.54.1.7 | ColumnfreeFSinode | read-only | mandatory | This entry is the current free inode counts of a file system. |
| 1.3.6.1.4.1.1050.25.4.54.1.8 | ColumnsysFSType | read-only | mandatory | This entry is the type of a file system. |
| 1.3.6.1.4.1.1050.25.4.54.1.9 | ColumnsysFSMountTime | read-only | mandatory | This entry is the mount time of a file system. |
| 1.3.6.1.4.1.1050.25.4.55 | NodedmiInfo | |||
| 1.3.6.1.4.1.1050.25.4.55.1 | ScalarbiosVendor | read-only | mandatory | This entry displays the name of the BIOS vendor. |
| 1.3.6.1.4.1.1050.25.4.55.2 | ScalarbiosVersion | read-only | mandatory | This entry displays the BIOS version. |
| 1.3.6.1.4.1.1050.25.4.55.3 | ScalarbiosStartingAddressSegment | read-only | mandatory | This entry displays the segment location of the BIOS starting address, e.g. 0E800h. |
| 1.3.6.1.4.1.1050.25.4.55.4 | ScalarbiosReleaseDate | read-only | mandatory | This entry displays the BIOS release date in mm/dd/yy format. |
| 1.3.6.1.4.1.1050.25.4.55.5 | ScalarbiosROMSize | read-only | mandatory | This entry displays the ROM size of the BIOS. Size is 64K*(n+1). 0=64K, 1=128K, 2=256K, etc. |
| 1.3.6.1.4.1.1050.25.4.55.6 | ScalarbiosCharacteristics1 | read-only | mandatory | This entry displays the first 32 bits of BIOS characteristics. It defines which functions the BIOS supports. PCI, PCMCIA, Flash, etc. Bit 0 Reserved Bit 1 Rese… |
| 1.3.6.1.4.1.1050.25.4.55.7 | ScalarbiosCharacteristics2 | read-only | mandatory | This entry displays the second 32 bits of BIOS characteristics. It defines which functions the BIOS supports. PCI, PCMCIA, Flash, etc. Bit 0 Reserved Bit 1 Res… |
| 1.3.6.1.4.1.1050.25.4.55.8 | ScalarsiManufacturer | read-only | mandatory | This entry displays the manufacturer of this computer system. |
| 1.3.6.1.4.1.1050.25.4.55.9 | ScalarsiProductName | read-only | mandatory | This entry displays the name of this product. |
| 1.3.6.1.4.1.1050.25.4.55.10 | ScalarsiVersion | read-only | mandatory | This entry displays the version number of this system. |
| 1.3.6.1.4.1.1050.25.4.55.11 | ScalarsiSerialNumber | read-only | mandatory | This entry displays the serial number of this system. |
| 1.3.6.1.4.1.1050.25.4.55.12 | ScalarbbManufacturer | read-only | mandatory | This entry displays the base board manufacturer. |
| 1.3.6.1.4.1.1050.25.4.55.13 | ScalarbbProductName | read-only | mandatory | This entry displays the base board product name. |
| 1.3.6.1.4.1.1050.25.4.55.14 | ScalarbbVersion | read-only | mandatory | This entry displays the base board version. |
| 1.3.6.1.4.1.1050.25.4.55.15 | ScalarbbSerialNumber | read-only | mandatory | This entry displays the base board serial number. |
| 1.3.6.1.4.1.1050.25.4.55.16 | ScalarmcErrorDetectingMethod | read-only | mandatory | This entry displays the supported error detection method of the memory controller. 01h : Other 02h : Unknown 03h : None 04h : 8-bit Parity 05h : 32-bit ECC 06h… |
| 1.3.6.1.4.1.1050.25.4.55.17 | ScalarmcErrorCorrectingCapability | read-only | mandatory | This entry displays the error correcting capability of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : None Bit 3 : Single Bit Error Correcting Bi… |
| 1.3.6.1.4.1.1050.25.4.55.18 | ScalarmcSupportedInterleave | read-only | mandatory | This entry displays the supported memory interleave of the memory controller. 01h : Other 02h : Unknown 03h : One Way Interleave 04h : Two Way Interleave 05h :… |
| 1.3.6.1.4.1.1050.25.4.55.19 | ScalarmcCurrentInterleave | read-only | mandatory | This entry displays the current memory interleave of the memory controller. 01h : Other 02h : Unknown 03h : One Way Interleave 04h : Two Way Interleave 05h : F… |
| 1.3.6.1.4.1.1050.25.4.55.20 | ScalarmcMaximumMemoryModuleSize | read-only | mandatory | This entry displays the size of the largest memory module supported (per slot), specified as n, where 2^n is the maximum size in MB. |
| 1.3.6.1.4.1.1050.25.4.55.21 | ScalarmcSupportedSpeeds | read-only | mandatory | This entry displays the supported memory speeds of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : 70ns Bit 3 : 60ns Bit 4 : 50ns Bit 5-15 : Reser… |
| 1.3.6.1.4.1.1050.25.4.55.22 | ScalarmcSupportedMemoryTypes | read-only | mandatory | This entry displays the supported memory types of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : Standard Bit 3 : Fast Page Mode Bit 4 : EDO Bit … |
| 1.3.6.1.4.1.1050.25.4.55.23 | ScalarmcMemoryModuleVoltage | read-only | mandatory | This entry describes the required voltages for each of the memory module sockets controlled by the controller: Bits 7:3 Reserved, must be zero Bit 2 2.9V Bit 1… |
| 1.3.6.1.4.1.1050.25.4.55.24 | ScalarmcNumberOfAssociatedMemorySlots | read-only | mandatory | This entry defines how many of the Memory Module Information blocks are controlled by the controller. |
| 1.3.6.1.4.1.1050.25.4.55.25 | ScalarpiNumberOfProcessorInfo | read-only | mandatory | This field shows the number of entries in the piProcessorInfoTable. |
| 1.3.6.1.4.1.1050.25.4.55.26 | ScalarmmNumberOfMemoryModuleInfo | read-only | mandatory | This entry shows the number of entries in the mmMemoryModuleInfoTable. |
| 1.3.6.1.4.1.1050.25.4.55.27 | ScalarciNumberOfCacheInfo | read-only | mandatory | This field shows the number of entries in the ciCacheInfoTable. |
| 1.3.6.1.4.1.1050.25.4.55.28 | ScalarpcNumberOfPortConnectorInfo | read-only | mandatory | This field shows the number of entries in the pcPortConnectorInfoTable |
| 1.3.6.1.4.1.1050.25.4.55.29 | ScalarssNumberOfSystemSlotInfo | read-only | mandatory | This field shows the number of entries in ssSystemSlotInfoTable |
| 1.3.6.1.4.1.1050.25.4.55.30 | ScalarobNumberOfOnBoardDeviceInfo | read-only | mandatory | This field shows the number of entries in the obOnBoardDeviceInfoTable. |
| 1.3.6.1.4.1.1050.25.4.55.31 | ScalaroemNumberOfOEMString | read-only | mandatory | This field shows the number of entries in the oemStringTable. |
| 1.3.6.1.4.1.1050.25.4.55.32 | ScalarsmNumberOfEventLog | read-only | mandatory | This field shows the number of entries in the smEventLogTable. |
| 1.3.6.1.4.1.1050.25.4.55.33 | ScalarsmEventLogSupport | read-only | mandatory | This entry shows if BIOS supports System Event Log function: 0 = NO else = YES |
| 1.3.6.1.4.1.1050.25.4.55.34 | ScalarsmEventLogTotalSize | read-only | mandatory | This entry shows the total size of event log data area in bytes. |
| 1.3.6.1.4.1.1050.25.4.55.35 | ScalarsmEventLogUsedSize | read-only | mandatory | This entry shows the used size of event log data area in bytes. |
| 1.3.6.1.4.1.1050.25.4.55.36 | ScalarsmEventLogUtilizationThreshold | read-write | mandatory | This entry shows the threshold value (%) for event log data area utilization. |
| 1.3.6.1.4.1.1050.25.4.55.52 | TablepiProcessorInfoTable | not-accessible | mandatory | This entry is a table containing information about all types of processors on the system. |
| 1.3.6.1.4.1.1050.25.4.55.52.1 | RowpiProcessorInfo | not-accessible | mandatory | This entry shows information about each processor. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.1 | ColumnpiSocketDesignation | read-only | mandatory | This entry displays the processor socket designation label on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.2 | ColumnpiProcessorType | read-only | mandatory | This entry displays the processor type. 01H - other 02H - Unknown 03H - Central Processor 04H - Math Processor 05H - DSP Processor 06H - Video Processor |
| 1.3.6.1.4.1.1050.25.4.55.52.1.3 | ColumnpiProcessorFamily | read-only | mandatory | This entry displays the family to which this processor belongs to. 01H - other 02H - Unknown 03H - 8086 04H - 80286 05H - 80386 06H - 80486 07H - 8087 08H - 80… |
| 1.3.6.1.4.1.1050.25.4.55.52.1.4 | ColumnpiProcessorManufacturer | read-only | mandatory | This entry displays the processor's manufacturer. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.5 | ColumnpiProcessorID | read-only | mandatory | This entry displays specific information which describes the processor's features. For x86 class CPUs. the field's format depends on the processor's support of… |
| 1.3.6.1.4.1.1050.25.4.55.52.1.6 | ColumnpiProcessorVersion | read-only | mandatory | This entry displays the processor version. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.7 | ColumnpiVoltage | read-only | mandatory | This entry shows the processor's voltage requirement. Bits 7:4 Reserved, must be zero Bits 3:0 Voltage Capability. A Set bit indicates the voltage is supported… |
| 1.3.6.1.4.1.1050.25.4.55.52.1.8 | ColumnpiExternalClock | read-only | mandatory | This entry shows the processor's external clock frequency in MHz. If the value is unknown, the field is set to 0. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.9 | ColumnpiMaxSpeed | read-only | mandatory | This entry shows the processor's maximum speed in MHz. If the value is unknown, the field is set to 0. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.10 | ColumnpiCurrentSpeed | read-only | mandatory | This entry shows the processor's current speed in MHz. If the value is unknown, the field is set to 0. |
| 1.3.6.1.4.1.1050.25.4.55.52.1.11 | ColumnpiStatus | read-only | mandatory | This entry shows the status of this processor. Bit 6 CPU socket populated. 1 - CPU Socket Populated. 0 - CPU Socket Unpopulated. Bits 2:0 CPU Status 0h - Unkno… |
| 1.3.6.1.4.1.1050.25.4.55.52.1.12 | ColumnpiProcessorUpgrade | read-only | mandatory | This entry shows the processor upgrade method. 01h - other 02h - unknown 03h - daughter board 04h - ZIF socket 05h - replaceable piggy back 06h - None 07h - LI… |
| 1.3.6.1.4.1.1050.25.4.55.53 | TablemmMemoryModuleInfoTable | not-accessible | mandatory | This entry is a table containing information about all memory module sockets |
| 1.3.6.1.4.1.1050.25.4.55.53.1 | RowmmMemoryModuleInfo | not-accessible | mandatory | This entry shows information about each memory module. |
| 1.3.6.1.4.1.1050.25.4.55.53.1.1 | ColumnmmSocketDesignation | read-only | mandatory | This entry shows the memory socket designation labels on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.53.1.2 | ColumnmmBankConnections | read-only | mandatory | This entry shows the socket to which a memory module is installed. It is a single byte value, in this byte each nibble indicates a bank(RAS#) connection, 0xF m… |
| 1.3.6.1.4.1.1050.25.4.55.53.1.3 | ColumnmmCurrentSpeed | read-only | mandatory | This entry shows the speed of the memory module, , in ns (e.g. 70d for a 70ns module). If the speed is unknown, the field is set to 0. |
| 1.3.6.1.4.1.1050.25.4.55.53.1.4 | ColumnmmCurrentMemoryType | read-only | mandatory | This entry shows the type of memory module currently installed: Bit 0 - other Bit 1 - unknown Bit 2 - Standard Bit 3 - Fast Page Mode Bit 4 - EDO Bit 5 - Parit… |
| 1.3.6.1.4.1.1050.25.4.55.53.1.5 | ColumnmmInstalledSize | read-only | mandatory | This entry shows the installed memory size. Bits 0 - 6 represent the size(n), where 2^n is the size in MB. |
| 1.3.6.1.4.1.1050.25.4.55.53.1.6 | ColumnmmEnabledSize | read-only | mandatory | This entry shows the enabled memory size. Bits 0 - 6 represent the size(n), where 2^n is the size in MB. |
| 1.3.6.1.4.1.1050.25.4.55.53.1.7 | ColumnmmErrorStatus | read-only | mandatory | This entry shows the memory error status. Bit 1 - Correctable errors received for the module Bit 0 - Uncorrectable errors received for the module |
| 1.3.6.1.4.1.1050.25.4.55.54 | TableciCacheInfoTable | not-accessible | mandatory | This entry is a table containing information about CPU cache devices. |
| 1.3.6.1.4.1.1050.25.4.55.54.1 | RowciCacheInfo | not-accessible | mandatory | This entry shows information about each CPU cache device. |
| 1.3.6.1.4.1.1050.25.4.55.54.1.1 | ColumnciSocketDesignation | read-only | mandatory | This entry shows the cache socket designation labels on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.54.1.2 | ColumnciCacheConfiguration | read-only | mandatory | This entry shows the configuration of this cache module. Bits 15:10 - Reserved, must be 0 Bits 9:8 - Operational Mode: 00b - Write through 01b - Write back 10b… |
| 1.3.6.1.4.1.1050.25.4.55.54.1.3 | ColumnciMaximumCacheSize | read-only | mandatory | This entry shows the maximum cache size that can be installed. Bits 14:0 : Max. size in given granularity Bit 15 Granularity : 0 = 1K granularity 1 = 64K granu… |
| 1.3.6.1.4.1.1050.25.4.55.54.1.4 | ColumnciInstalledSize | read-only | mandatory | This entry shows the installed cache size. Bits 14:0 : Max. size in given granularity Bit 15 Granularity : 0 = 1K granularity 1 = 64K granularity |
| 1.3.6.1.4.1.1050.25.4.55.54.1.5 | ColumnciSupportedSRAMType | read-only | mandatory | This entry shows the supported SRAM type. Bit 0 - Other Bit 1 - Unknown Bit 2 - Nonburst Bit 3 - Burst Bit 4 - Pipeline Burst Bit 5 - Synchronous Bit 6 - Async… |
| 1.3.6.1.4.1.1050.25.4.55.54.1.6 | ColumnciCurrentSRAMType | read-only | mandatory | This entry shows the current SRAM type. Bit 0 - Other Bit 1 - Unknown Bit 2 - Nonburst Bit 3 - Burst Bit 4 - Pipeline Burst Bit 5 - Synchronous Bit 6 - Asynchr… |
| 1.3.6.1.4.1.1050.25.4.55.55 | TablepcPortConnectorInfoTable | not-accessible | mandatory | This entry is a table containing information about all port connectors. |
| 1.3.6.1.4.1.1050.25.4.55.55.1 | RowpcPortConnectorInfo | not-accessible | mandatory | This entry shows information about each port connector. |
| 1.3.6.1.4.1.1050.25.4.55.55.1.1 | ColumnpcInternalReferenceDesignator | read-only | mandatory | This entry shows the internal reference designation labels on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.55.1.2 | ColumnpcInternalConnectorType | read-only | mandatory | This entry shows the internal connector type. 00h - None 01h - Centronics 02h - Mini Centronics 03h - Proprietary 04h - DB25 pin male 05h - DB25 pin female 06h… |
| 1.3.6.1.4.1.1050.25.4.55.55.1.3 | ColumnpcExternalReferenceDesignator | read-only | mandatory | This entry shows the external reference designation labels on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.55.1.4 | ColumnpcExternalConnectorType | read-only | mandatory | This entry shows the external connector type. 00h - None 01h - Centronics 02h - Mini Centronics 03h - Proprietary 04h - DB25 pin male 05h - DB25 pin female 06h… |
| 1.3.6.1.4.1.1050.25.4.55.55.1.5 | ColumnpcPortType | read-only | mandatory | This entry shows the port type 00h - None 01h - Parallel Port XT/AT Compatible 02h - Parallel Port PS/2 03h - Parallel Port ECP 04h - Parallel Port EPP 05h - P… |
| 1.3.6.1.4.1.1050.25.4.55.56 | TablessSystemSlotInfoTable | not-accessible | mandatory | This entry is a table containing information about all system slots. |
| 1.3.6.1.4.1.1050.25.4.55.56.1 | RowssSystemSlotInfo | not-accessible | mandatory | This entry shows information about each system slot. |
| 1.3.6.1.4.1.1050.25.4.55.56.1.1 | ColumnssSlotDesignation | read-only | mandatory | This entry shows the slot designation label on top of the base board. |
| 1.3.6.1.4.1.1050.25.4.55.56.1.2 | ColumnssSlotType | read-only | mandatory | This entry shows the slot type. 01h - Other 02h - Unknown 03h - ISA 04h - MCA 05h - EISA 06h - PCI 07h - PCMCIA 08h - VL VESA 09h - Proprietary 0Ah - Processor… |
| 1.3.6.1.4.1.1050.25.4.55.56.1.3 | ColumnssSlotDataBusWidth | read-only | mandatory | This entry shows the width of the data bus. 01h - Other 02h - Unknown 03h - 8bit 04h - 16bit 05h - 32bit 06h - 64bit 07h - 128bit |
| 1.3.6.1.4.1.1050.25.4.55.56.1.4 | ColumnssCurrentUsage | read-only | mandatory | This entry shows the current usage of this slot. 01h - Other 02h - Unknown 03h - Available 04h - In use |
| 1.3.6.1.4.1.1050.25.4.55.56.1.5 | ColumnssSlotLength | read-only | mandatory | This entry shows the length of the slot. 01h - Other 02h - Unknown 03h - Half Length 04h - Full Length |
| 1.3.6.1.4.1.1050.25.4.55.56.1.6 | ColumnssSlotID | read-only | mandatory | This entry shows the slot ID. MCA - Logical Micro Channel slot number EISA - Logical EISA slot number PCI - The value present in the slot number field of the P… |
| 1.3.6.1.4.1.1050.25.4.55.56.1.7 | ColumnssSlotCharacteristics | read-only | mandatory | This entry shows the characteristics of this slot. Bit 0 - Unknown Bit 1 - Provide 5.0 Volts Bit 2 - Provide 3.3 Volts Bit 1 - Slot's opening is shared with an… |
| 1.3.6.1.4.1.1050.25.4.55.57 | TableobOnBoardDeviceInfoTable | not-accessible | mandatory | This entry is a table containing information about all on board devices. |
| 1.3.6.1.4.1.1050.25.4.55.57.1 | RowobOnBoardDeviceInfo | not-accessible | mandatory | This entry shows information about each on board device. |
| 1.3.6.1.4.1.1050.25.4.55.57.1.1 | ColumnobDeviceType | read-only | mandatory | This entry shows the device type. 01H - Other 02H - Unknown 03H - Video 04H - SCSI 05H - Ethernet 06H - Token Ring 07H - Sound |
| 1.3.6.1.4.1.1050.25.4.55.57.1.2 | ColumnobDescription | read-only | mandatory | This entry shows the description of the on board device. |
| 1.3.6.1.4.1.1050.25.4.55.58 | TableoemStringTable | not-accessible | mandatory | This entry is a table showing OEM defined strings. |
| 1.3.6.1.4.1.1050.25.4.55.58.1 | RowoemStrings | not-accessible | mandatory | This entry shows information about each OEM string. |
| 1.3.6.1.4.1.1050.25.4.55.58.1.1 | ColumnoemString | read-only | mandatory | This entry is an individual OEM string. |
| 1.3.6.1.4.1.1050.25.4.55.59 | TablesmEventLogTable | not-accessible | mandatory | This entry is a table of event log entries. |
| 1.3.6.1.4.1.1050.25.4.55.59.1 | RowsmEventLogEntry | not-accessible | mandatory | This entry contains information about each logged event. |
| 1.3.6.1.4.1.1050.25.4.55.59.1.1 | ColumnsmLogTime | read-only | mandatory | This entry shows the event log time. |
| 1.3.6.1.4.1.1050.25.4.55.59.1.2 | ColumnsmLogType | read-only | mandatory | This entry shows the event log type. |
| 1.3.6.1.4.1.1050.25.4.55.59.1.3 | ColumnsmLogDescription | read-only | mandatory | This entry shows the event log description. |
| 1.3.6.1.4.1.1050.25.4.56 | ScalarnumberOfIPAddress | read-only | mandatory | This entry shows the number of IP addresses assigned to this server. |
| 1.3.6.1.4.1.1050.25.4.57 | TableipAddressTable | not-accessible | mandatory | This entry is a table showing the IP addresses assigned to this server. |
| 1.3.6.1.4.1.1050.25.4.57.1 | RowipAddresses | not-accessible | mandatory | This entry shows information about each IP address assigned to this server. |
| 1.3.6.1.4.1.1050.25.4.57.1.1 | ColumnipAddress | read-only | mandatory | This entry is the individual IP address assigned to this server. |
| 1.3.6.1.4.1.1050.25.4.58 | ScalaripxAddress | read-only | mandatory | This entry is the internal IPX address assigned to this server. |
| 1.3.6.1.4.1.1050.25.4.59 | ScalarnumberOfLoginUser | read-only | mandatory | This field shows the number of entries in the loginUserTable. |
| 1.3.6.1.4.1.1050.25.4.60 | TableloginUserTable | not-accessible | mandatory | This entry is a table containing information about all logged in users. |
| 1.3.6.1.4.1.1050.25.4.60.1 | RowloginUser | not-accessible | mandatory | This entry shows information about each logged in user. |
| 1.3.6.1.4.1.1050.25.4.60.1.1 | ColumnloginUserName | read-only | mandatory | This entry shows the logged in user's name. |
| 1.3.6.1.4.1.1050.25.4.60.1.2 | ColumnloginTime | read-only | mandatory | This entry shows the user's login time. |
| 1.3.6.1.4.1.1050.25.4.61 | ScalarnumberOfDriverLoaded | read-only | mandatory | This field shows the number of entries in the driverLoadedTable. |
| 1.3.6.1.4.1.1050.25.4.62 | TabledriverLoadedTable | not-accessible | mandatory | This entry is a table containing information about all software (including drivers) currently running on the server. |
| 1.3.6.1.4.1.1050.25.4.62.1 | RowdriverLoaded | not-accessible | mandatory | This entry contains information about each software running on the server. |
| 1.3.6.1.4.1.1050.25.4.62.1.1 | ColumndriverName | read-only | mandatory | This entry shows the name of the software running on the server. |
| 1.3.6.1.4.1.1050.25.4.62.1.2 | ColumndriverDescription | read-only | mandatory | This entry shows a description of the software running on the server. |
| 1.3.6.1.4.1.1050.25.4.63 | Nodeperformance | |||
| 1.3.6.1.4.1.1050.25.4.63.1 | ScalarnumberOfPageIn | read-only | mandatory | This entry shows the number of page-ins during the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.2 | ScalarbyteOfPageIn | read-only | mandatory | This entry shows the number of page-in bytes during the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.3 | ScalarnumberOfPageOut | read-only | mandatory | This entry shows the number of page-out during the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.4 | ScalarbyteOfPageOut | read-only | mandatory | This entry shows the number of page-out bytes during the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.5 | ScalarnumberOfPageFault | read-only | mandatory | This entry shows the total number of page-faults during the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.6 | ScalardiskCacheReadHitRatio | read-only | mandatory | This entry shows the ratio of disk cache read hits in the last sampling. |
| 1.3.6.1.4.1.1050.25.4.63.7 | ScalardiskCacheWriteHitRatio | read-only | mandatory | This entry shows the ratio of disk cache write hits in the last sampling |
| 1.3.6.1.4.1.1050.25.4.63.8 | ScalarnumberOfFreeMem | read-only | mandatory | This entry shows the number of 4KB pages available to user processes |
| 1.3.6.1.4.1.1050.25.4.63.9 | ScalarnumberOfTotalSwap | read-only | mandatory | This entry shows the total number of physical disk (512-byte) blocks available for swapping and paging |
| 1.3.6.1.4.1.1050.25.4.63.10 | ScalarnumberOfFreeSwap | read-only | mandatory | This entry shows the free number of physical disk (512-byte) blocks available for swapping and paging |
| 1.3.6.1.4.1.1050.25.4.63.11 | ScalarnumberOfSwapIn | read-only | mandatory | This entry shows the number of transfers from swap into memory per second |
| 1.3.6.1.4.1.1050.25.4.63.12 | ScalarnumberOfSwapInPages | read-only | mandatory | This entry shows the number of 4KB pages transfers from swap into memory per second |
| 1.3.6.1.4.1.1050.25.4.63.13 | ScalarnumberOfSwapOut | read-only | mandatory | This entry shows the number of transfers from memory into swap per second. If this value is greater than zero, you may need to increase the amount of memory or… |
| 1.3.6.1.4.1.1050.25.4.63.14 | ScalarnumberOfSwapOutPages | read-only | mandatory | This entry shows the number of 4KB pages transfers from memory into swap per second |
| 1.3.6.1.4.1.1050.25.4.63.15 | ScalarnumberOfContextSwitch | read-only | mandatory | This entry shows the number of context switch per second |
| 1.3.6.1.4.1.1050.25.4.65 | NodentPerf | |||
| 1.3.6.1.4.1.1050.25.4.65.1 | NodesystemPerf | |||
| 1.3.6.1.4.1.1050.25.4.65.1.1 | ScalarprocessorTime | read-only | mandatory | This entry is the average percentage of time all the processors on the system are busy to execute non-idle threads. |
| 1.3.6.1.4.1.1050.25.4.65.1.2 | ScalarprivilegedTime | read-only | mandatory | This entry is the average percentage of time spent in Privileged mode by all processors. |
| 1.3.6.1.4.1.1050.25.4.65.1.3 | ScalaruserTime | read-only | mandatory | This entry is the average percentage of time spent in User mode by all processors. |
| 1.3.6.1.4.1.1050.25.4.65.1.4 | ScalarinterruptTime | read-only | mandatory | This entry is the average percentage of the Interrupt Time of all processors. |
| 1.3.6.1.4.1.1050.25.4.65.1.5 | ScalarinterruptsPerSec | read-only | mandatory | This entry is the hardware interrupts received and serviced by the system per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.6 | ScalarcontextSwitchesPerSec | read-only | mandatory | This entry is the context switches from one thread to another per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.7 | ScalarexceptionDispatchesPerSec | read-only | mandatory | This entry is the exceptions dispatched by the system per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.8 | ScalarsystemCallsPerSec | read-only | mandatory | This entry is the calls to Windows NT system service routines per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.9 | ScalarfileControlOpsPerSec | read-only | mandatory | This entry is all file system operations that are neither reads nor writes per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.10 | ScalarfileControlBytesPerSec | read-only | mandatory | This entry is bytes transferred for all file system operations that are neither reads nor writes per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.11 | ScalarfileDataOpsPerSec | read-only | mandatory | This entry is the read and write operations to file system devices per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.12 | ScalarfileReadOpsPerSec | read-only | mandatory | This entry is the read operations of all the file system per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.13 | ScalarfileWriteOpsPerSec | read-only | mandatory | This entry is the number of write operations of all the file system per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.14 | ScalarfileReadBytesPerSec | read-only | mandatory | This entry is the bytes transferred for all the file system read operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.1.15 | ScalarfileWriteBytesPerSec | read-only | mandatory | This entry is the bytes transferred for all the file system write operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.2 | NodecachePerf | |||
| 1.3.6.1.4.1.1050.25.4.65.2.1 | ScalarcopyReadsHitRatio | read-only | mandatory | This entry is the percentage of Cache Copy Read requests that hit the cache. |
| 1.3.6.1.4.1.1050.25.4.65.2.2 | ScalarcopyReadsPerSec | read-only | mandatory | This entry is the number of copy reads per second. |
| 1.3.6.1.4.1.1050.25.4.65.2.3 | ScalardataMapHitRatio | read-only | mandatory | This entry is the percentage of Data Maps in the cache. |
| 1.3.6.1.4.1.1050.25.4.65.2.4 | ScalardataMapsPerSec | read-only | mandatory | This entry is the frequency (per second) that a file system maps a page of a file into the cache to read the page. |
| 1.3.6.1.4.1.1050.25.4.65.2.5 | ScalardataFlushesPerSec | read-only | mandatory | This entry is the frequency (per second) that the cache has flushed its contents to disk. More than one page can be transferred on each flush operation. |
| 1.3.6.1.4.1.1050.25.4.65.2.6 | ScalardataFlushPagesPerSec | read-only | mandatory | This entry is the number of pages per second the cache has flushed to disk. More than one page can be transferred on each flush operation. |
| 1.3.6.1.4.1.1050.25.4.65.2.7 | ScalarlazeWriteFlushesPerSec | read-only | mandatory | This entry is the frequency (per second) that the cache's Lazy Write thread has written to disk. More than one page can be transferred on each write operation. |
| 1.3.6.1.4.1.1050.25.4.65.2.8 | ScalarlazeWritePagesPerSec | read-only | mandatory | This entry is the frequency (per second) the cache's Lazy Write thread has written to disk. More than one page can be transferred on a single disk write operat… |
| 1.3.6.1.4.1.1050.25.4.65.3 | NodememoryPerf | |||
| 1.3.6.1.4.1.1050.25.4.65.3.1 | ScalarpageFaultsPerSec | read-only | mandatory | This entry is the number of page faults per second in the processor. |
| 1.3.6.1.4.1.1050.25.4.65.3.2 | ScalartransitionFaultsPerSec | read-only | mandatory | This entry is the number of page faults resolved per second by recovering pages that were in transition. The pages were recovered without additional disk activ… |
| 1.3.6.1.4.1.1050.25.4.65.3.3 | ScalarwriteCopiesPerSec | read-only | mandatory | This entry is the number of page faults per second that have been satisfied by making a copy of a page when an attempt to write to the page is made. |
| 1.3.6.1.4.1.1050.25.4.65.3.4 | ScalarpageReadPerSec | read-only | mandatory | This entry is the number of times the disk was read per second to retrieve pages of virtual memory necessary to resolve page faults. Multiple pages can be read… |
| 1.3.6.1.4.1.1050.25.4.65.3.5 | ScalarpageWritePerSec | read-only | mandatory | This entry is the number of times per second that pages have been written to the disk. Each such write operation may transfer a number of pages. |
| 1.3.6.1.4.1.1050.25.4.65.3.6 | ScalarpagesInputPerSec | read-only | mandatory | This entry is the number of pages read per second from the disk to resolve memory references to pages. This counter includes paging traffic on behalf of the sy… |
| 1.3.6.1.4.1.1050.25.4.65.3.7 | ScalarpagesOutputPerSec | read-only | mandatory | This entry is the number of pages written to the disk per second because the pages have been modified in main memory. |
| 1.3.6.1.4.1.1050.25.4.65.3.8 | ScalarpagesPerSec | read-only | mandatory | This entry is the number of pages read from or written to the disk per second to resolve memory references to pages that were not in memory. |
| 1.3.6.1.4.1.1050.25.4.65.3.9 | ScalarsystemCodeBytes | read-only | mandatory | This entry is the number of pagable bytes of System Code Total Bytes currently resident in core memory. There is another ~300k bytes of non-paged kernel code. |
| 1.3.6.1.4.1.1050.25.4.65.3.10 | ScalarsystemDriverBytes | read-only | mandatory | This entry is the number of pagable bytes of System Driver Total Bytes currently resident in core memory. There is another ~700k bytes of non-paged driver code. |
| 1.3.6.1.4.1.1050.25.4.65.5 | TablephysicalDiskPerfTbl | not-accessible | mandatory | This entry is a table containing the performance counters of physical disk drives. |
| 1.3.6.1.4.1.1050.25.4.65.5.1 | RowphysicalDiskPerf | not-accessible | mandatory | This entry contains information about each performance counter of a physical disk drive. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.1 | ColumnphysicalDiskId | read-only | mandatory | This entry is the index for physical disk drives starting from 1. A 0 value will report an average value of all physical disk drives. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.2 | ColumnavgBytesPerRead | read-only | mandatory | This entry is the average number of bytes transferred from the disk during read operations. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.3 | ColumnavgBytesPerWrite | read-only | mandatory | This entry is the average number of bytes transferred to the disk during write operations. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.4 | ColumnavgBytesPerTransfer | read-only | mandatory | This entry is the average number of bytes transferred to or from the disk during write or read operations. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.5 | ColumnavgSecPerRead | read-only | mandatory | This entry is the average time in seconds of a read of data from the disk. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.6 | ColumnavgSecPerWrite | read-only | mandatory | This entry is the average time in seconds of a write of data to the disk. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.7 | ColumnavgSecPerTransfer | read-only | mandatory | This entry is the time in seconds of the average disk transfer. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.8 | ColumndiskReadBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred from the disk during read operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.9 | ColumndiskWriteBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred to the disk during write operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.10 | ColumndiskBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred to or from the disk during write or read operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.11 | ColumndiskReadPerSec | read-only | mandatory | This entry is the number of read operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.12 | ColumndiskWritePerSec | read-only | mandatory | This entry is the number of write operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.65.5.1.13 | ColumndiskTransferPerSec | read-only | mandatory | This entry is the number of read and write operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.65.6 | TablelogicalDiskPerfTbl | not-accessible | mandatory | This entry is a table containing the performance counters of logical disk drives. |
| 1.3.6.1.4.1.1050.25.4.65.6.1 | RowlogicalDiskPerf | not-accessible | mandatory | This entry contains information about each performance counter of a logical disk drive. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.1 | ColumnlogicalDiskId | read-only | mandatory | This entry is the index for logical disk drives starting from 1. A 0 value will report an average value of all physical disk drives. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.2 | ColumnlavgBytesPerRead | read-only | mandatory | This entry is the average number of bytes transferred from the disk during read operations. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.3 | ColumnlavgBytesPerWrite | read-only | mandatory | This entry is the average number of bytes transferred to the disk during write operations. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.4 | ColumnlavgBytesPerTransfer | read-only | mandatory | This entry is the average number of bytes transferred to or from the disk during write or read operations. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.5 | ColumnlavgSecPerRead | read-only | mandatory | This entry is the average time in seconds of a read of data from the disk. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.6 | ColumnlavgSecPerWrite | read-only | mandatory | This entry is the average time in seconds of a write of data to the disk. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.7 | ColumnlavgSecPerTransfer | read-only | mandatory | This entry is the time in seconds of the average disk transfer. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.8 | ColumnldiskReadBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred from the disk during read operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.9 | ColumnldiskWriteBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred to the disk during write operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.10 | ColumnldiskBytesPerSec | read-only | mandatory | This entry is the number of bytes transferred to or from the disk during write or read operations per second. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.11 | ColumnldiskReadPerSec | read-only | mandatory | This entry is the number of read operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.12 | ColumnldiskWritePerSec | read-only | mandatory | This entry is the number of write operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.65.6.1.13 | ColumnldiskTransferPerSec | read-only | mandatory | This entry is the number of read and write operations on the disk per second. |
| 1.3.6.1.4.1.1050.25.4.66 | ScalarserverLocalTime | read-only | mandatory | This field shows the real local time on each server. |
| 1.3.6.1.4.1.1050.25.5 | Nodeasmsystem | |||
| 1.3.6.1.4.1.1050.25.5 | NodetrapFanStop | The agent will send a trap of this type when any fan stops functioning. | ||
| 1.3.6.1.4.1.1050.25.5.1 | ScalarosType | read-only | mandatory | This entry displays the server's operating system: 0 = NetWare 1 = SCO UNIX 2 = Windows NT 3 = UnixWare |
| 1.3.6.1.4.1.1050.25.5.2 | ScalarasmHardware | read-only | mandatory | This shows whether or not the system supports ASM proprietary hardware: 0 = NO 1 = YES |
| 1.3.6.1.4.1.1050.25.5.3 | ScalarasmDmiVersion | read-only | mandatory | This entry shows the Acer DMI BIOS version number: 0 = not supported 110 = version 1.1 200 = version 2.0 |
| 1.3.6.1.4.1.1050.25.5.4 | NodeasmHW | |||
| 1.3.6.1.4.1.1050.25.5.4.1 | ScalarnumberOfFans | read-only | mandatory | This entry shows the number of fans installed. |
| 1.3.6.1.4.1.1050.25.5.4.2 | ScalarnumberOfThermometers | read-only | mandatory | This entry shows the number of system thermometers installed. |
| 1.3.6.1.4.1.1050.25.5.4.3 | ScalarnumberOfVoltages | read-only | mandatory | This entry shows the number of voltage sensors installed. |
| 1.3.6.1.4.1.1050.25.5.4.4 | ScalarnumberOfBusCounters | read-only | mandatory | This entry shows the number of bus utilization counters. |
| 1.3.6.1.4.1.1050.25.5.4.5 | ScalarasmUPS | read-only | mandatory | This entry shows the UPS device condition: 1 = server with UPS device 0 = server without UPS device |
| 1.3.6.1.4.1.1050.25.5.4.7 | ScalarchassisIntrusion | read-only | mandatory | The status of chassis intrusion: -1 = Not supported, 0 = normal, 1 = abnormal. |
| 1.3.6.1.4.1.1050.25.5.4.8 | ScalarfuseStatus | read-only | mandatory | This entry displays the status of fuses. Each bit indicates separate status of one fuse, 1 is failed, 0 is noraml. If system has no fuse at all, the entry show… |
| 1.3.6.1.4.1.1050.25.5.4.9 | ScalarredundantPowerSupplyStatus | read-only | mandatory | This entry displays the status of redundant power subsystem. If system has no such equipment installed, bit31 of this value will be set to 1. Bit 0: power supp… |
| 1.3.6.1.4.1.1050.25.5.4.10 | ScalarnumberOfCpuSlot | read-only | mandatory | This entry shows the number of CPU slots: 0 = unknown 1-8 = number of CPU slots. |
| 1.3.6.1.4.1.1050.25.5.4.11 | TablefanTable | not-accessible | mandatory | This entry is a table containing information about all fans. |
| 1.3.6.1.4.1.1050.25.5.4.11.1 | RowfanInfo | not-accessible | mandatory | This entry contains information about each fan. |
| 1.3.6.1.4.1.1050.25.5.4.11.1.1 | ColumnfanLocation | read-only | mandatory | This entry shows the fan's location in the server system, e.g. 'CPU1', 'CPU2' or 'HOUSING'. |
| 1.3.6.1.4.1.1050.25.5.4.11.1.2 | ColumnfanStatus | read-only | mandatory | This entry displays the fan's working status: 0=normal 1=abnormal. When the fan is not rotating or is not installed, the status will be considered abnormal. |
| 1.3.6.1.4.1.1050.25.5.4.11.1.3 | ColumnfanRPM | read-only | optional | This entry displays the fan's rotation speed in RPM. If the fan doesn't provide RPM information, the value will be -1. |
| 1.3.6.1.4.1.1050.25.5.4.12 | TablethermometerTable | not-accessible | mandatory | This entry is a table containing information about all system thermometers installed. |
| 1.3.6.1.4.1.1050.25.5.4.12.1 | RowthermometerInfo | not-accessible | mandatory | This entry contains information about each thermometer. |
| 1.3.6.1.4.1.1050.25.5.4.12.1.1 | ColumnthermometerLocation | read-only | mandatory | This entry shows the thermometer's location in the server system, e.g. 'CPU1', 'CPU2' or 'SYSTEM'. |
| 1.3.6.1.4.1.1050.25.5.4.12.1.2 | ColumnthermometerDegree | read-only | mandatory | This entry displays the thermometer reading. Values displayed have to be divided by ten (10) to show the temperature in degrees Celsius. For example, a reading… |
| 1.3.6.1.4.1.1050.25.5.4.13 | TablevoltageTable | not-accessible | mandatory | This entry is a table containing information about all voltage sensors installed. |
| 1.3.6.1.4.1.1050.25.5.4.13.1 | RowvoltageInfo | not-accessible | mandatory | This entry contains information about each voltage sensor. |
| 1.3.6.1.4.1.1050.25.5.4.13.1.1 | ColumnvoltageLocation | read-only | mandatory | This entry shows the voltage sensor's location in the server system, e.g. 'CPU1', 'CPU2' or 'SYSTEM'. |
| 1.3.6.1.4.1.1050.25.5.4.13.1.2 | ColumncurrentVoltage | read-only | mandatory | This entry displays the current voltage reading in milli-volts. |
| 1.3.6.1.4.1.1050.25.5.4.13.1.3 | ColumnvalidVoltage | read-only | mandatory | This entry displays the ideal voltage reading in milli-volts. |
| 1.3.6.1.4.1.1050.25.5.4.13.1.4 | ColumnmaxVoltage | read-only | mandatory | This entry displays the maximum safe operating voltage in milli-volts. If the voltage goes above this value, the system may not work properly. |
| 1.3.6.1.4.1.1050.25.5.4.13.1.5 | ColumnminVoltage | read-only | mandatory | This entry displays the minimum safe operating voltage in milli-volts. If the voltage goes below this value, the system may not work properly. |
| 1.3.6.1.4.1.1050.25.5.4.14 | TablebusCounterTable | not-accessible | mandatory | This entry is a table containing information about all bus utilization counters installed. |
| 1.3.6.1.4.1.1050.25.5.4.14.1 | RowbusCounterInfo | not-accessible | mandatory | This entry contains information about each bus utilization counter. |
| 1.3.6.1.4.1.1050.25.5.4.14.1.1 | ColumnbusCounterLocation | read-only | mandatory | The system bus monitored by the counter e.g. 'PCI1', 'PCI2', 'EISA1' or 'EISA2'. |
| 1.3.6.1.4.1.1050.25.5.4.14.1.2 | ColumnbusUtilization | read-only | mandatory | This entry displays the bus utilization. Values displayed have to be divided by one hundred (100) to show the percentage of bus utilization. For example, a rea… |
| 1.3.6.1.4.1.1050.25.5.4.15 | NodeasmUPSInfo | |||
| 1.3.6.1.4.1.1050.25.5.4.15.1 | ScalarupsPower1Exist | read-only | mandatory | This entry shows the power supply condition: 1 = power supply #1 exists 0 = power supply #1 doesn't exist. |
| 1.3.6.1.4.1.1050.25.5.4.15.2 | ScalarupsPower2Exist | read-only | mandatory | This entry shows the power supply condition: 1 = power supply #2 exists 0 = power supply #2 doesn't exist. |
| 1.3.6.1.4.1.1050.25.5.4.15.3 | ScalarupsPower3Exist | read-only | mandatory | This entry shows the power supply condition: 1 = power supply #3 exists 0 = power supply #3 doesn't exist. |
| 1.3.6.1.4.1.1050.25.5.4.15.4 | ScalarupsPower1Status | read-only | mandatory | This entry shows the power supply condition: 0 = power supply #1 is abnormal 1 = power supply #1 is normal. |
| 1.3.6.1.4.1.1050.25.5.4.15.5 | ScalarupsPower2Status | read-only | mandatory | This entry shows the power supply condition: 0 = power supply #2 is abnormal 1 = power supply #2 is normal. |
| 1.3.6.1.4.1.1050.25.5.4.15.6 | ScalarupsPower3Status | read-only | mandatory | This entry shows the power supply condition: 0 = power supply #3 is abnormal 1 = power supply #3 is normal. |
| 1.3.6.1.4.1.1050.25.5.4.15.7 | ScalarupsBatteryExist | read-only | mandatory | This entry shows the battery condition: 1 = battery exists 0 = battery doesn't exist. |
| 1.3.6.1.4.1.1050.25.5.4.15.8 | ScalarupsBatteryStatus | read-only | mandatory | This entry shows the power supply condition: 0 = power supply #3 is abnormal 1 = power supply #3 is normal. |
| 1.3.6.1.4.1.1050.25.5.4.15.9 | ScalarupsACStatus | read-only | mandatory | This entry shows the AC power condition: 0 = AC power is abnormal 1 = AC power is normal. |
| 1.3.6.1.4.1.1050.25.5.4.15.10 | ScalarupsFanStatus | read-only | mandatory | This entry shows the fan condition: 0 = power ups fan is abnormal 1 = power ups fan is normal. |
| 1.3.6.1.4.1.1050.25.5.4.17 | ScalarcpuSlotStatus | read-only | mandatory | This entry is partitioned into nibbles, each shows status of one CPU slot: bit0: CPU is present bit1: CPU is enabled bit2: CPU error (IERR#, Thermtrip# issued). |
| 1.3.6.1.4.1.1050.25.5.5 | ScalarasmAgentVersion | read-only | mandatory | This entry shows the ASM Agent version number: 120 = version 1.2, 200 = version 2.0, etc. |
| 1.3.6.1.4.1.1050.25.5.6 | ScalarpasswordProtected | read-only | mandatory | This entry shows if the ASM Agent requires password for SNMP Set: 1 = YES 0 = NO |
| 1.3.6.1.4.1.1050.25.5.7 | ScalarnumberOfTrapTargets | read-only | mandatory | This entry shows the number of targets of SNMP Trap. |
| 1.3.6.1.4.1.1050.25.5.8 | TabletrapTargetTable | not-accessible | mandatory | This entry is a table containing information about all trap targets. |
| 1.3.6.1.4.1.1050.25.5.8.1 | RowtrapTargetInfo | not-accessible | mandatory | This entry contains information about each trap target. Index starts at 0. |
| 1.3.6.1.4.1.1050.25.5.8.1.1 | ColumntargetAddress | read-only | mandatory | This entry shows the trap target's IP/IPX address in ASCII format. For example, 00ABCDEF:000000000001 for IPX 192.9.210.99 for IP |
| 1.3.6.1.4.1.1050.25.5.9 | ScalarrdmStatus | read-only | mandatory | This entry shows the status of RDM daughter board. |
| 1.3.6.1.4.1.1050.25.5.10 | ScalarhealthStatus | read-only | mandatory | This entry shows the health status of system. Each bit indicates one health index |
| 1.3.6.1.4.1.1050.25.5.11 | ScalarfileTransferPortTCP | read-only | mandatory | TCP port of FTU deamon. -1=N/A |
| 1.3.6.1.4.1.1050.25.5.12 | ScalarfileTransferPortIPX | read-only | mandatory | IPX port of FTU deamon. -1=N/A |
| 1.3.6.1.4.1.1050.25.5.13 | ScalarfileCommand | write-only | mandatory | 0 : Clear Event Log 1 : Update Asset Log 2 : Clear Statistics Log 3 : Start Statistics recording 4 : Stop Statistics recording |
| 1.3.6.1.4.1.1050.25.5.14 | ScalardisableEventHandling | read-write | mandatory | If this object is set to non-zero, Agent won't handle any event and runs quietly. |
| 1.3.6.1.4.1.1050.25.6 | NodetrapVoltage | The agent will send a trap of this type when any voltage reading exceeds the safe operating range. | ||
| 1.3.6.1.4.1.1050.25.7 | Nodeasmalarm | |||
| 1.3.6.1.4.1.1050.25.7 | NodetrapCPUUtilization | The agent will send a trap of this type when percent CPU utilization exceeds the threshold value. | ||
| 1.3.6.1.4.1.1050.25.7.1 | ScalartrapDescription | read-only | optional | This entry contains information about the last trap sent. |
| 1.3.6.1.4.1.1050.25.7.2 | TableeventNotificationTable | not-accessible | mandatory | This entry is a table containing all event notification settings. |
| 1.3.6.1.4.1.1050.25.7.2.1 | RoweventNotification | not-accessible | mandatory | This entry contains information about each event notification setting. |
| 1.3.6.1.4.1.1050.25.7.2.1.1 | ColumnasmEventType | read-only | mandatory | This entry shows the event type: 1 : Temperature Warning 2 : Temperature Critical 3 : ECC Memory 1-Bit-Error 4 : ECC Memory Multiple-Bit-Error 5 : Fan Stops 6 … |
| 1.3.6.1.4.1.1050.25.7.2.1.2 | ColumneventAction | read-write | mandatory | This entry describes the actions to be taken by the agent or station when a particular event occurs. Station Side: Bit 0 : Audio Alarm Bit 1 : Flash Title Bar … |
| 1.3.6.1.4.1.1050.25.7.2.1.3 | ColumneventProgram | read-write | mandatory | This entry shows the command string used to launch a user defined program. |
| 1.3.6.1.4.1.1050.25.7.2.1.4 | ColumneventPager | read-write | mandatory | This entry shows the pager string including telephone number and pager code. |
| 1.3.6.1.4.1.1050.25.8 | NodetrapBusUtilization | The agent will send a trap of this type when percent bus utilization exceeds the threshold value. | ||
| 1.3.6.1.4.1.1050.25.9 | NodetrapMemoryUtilization | The agent will send a trap of this type when percent memory utilization exceeds the threshold value. | ||
| 1.3.6.1.4.1.1050.25.10 | NodetrapVolumeUtilization | The agent will send a trap of this type when percent volume utilization exceeds the threshold value. | ||
| 1.3.6.1.4.1.1050.25.11 | NodetrapNICCounter | The agent will send a trap of this type when any NIC statistical counter exceeds the threshold value. | ||
| 1.3.6.1.4.1.1050.25.12 | NodetrapPSFail | The agent will send a trap of this type when any power supply fails. | ||
| 1.3.6.1.4.1.1050.25.13 | NodetrapACFail | The agent will send a trap of this type when AC power fails. | ||
| 1.3.6.1.4.1.1050.25.14 | NodetrapPowerFanFail | The agent will send a trap of this type when any power sub-system fan fails. | ||
| 1.3.6.1.4.1.1050.25.15 | NodetrapBatteryFail | The agent will send a trap of this type when UPS battery fails. | ||
| 1.3.6.1.4.1.1050.25.16 | NodetrapChassisIntrusion | The agent will send a trap of this type when chassis intrusion occurs. | ||
| 1.3.6.1.4.1.1050.25.17 | NodetrapFuseFail | The agent will send a trap of this type when fuse failed. | ||
| 1.3.6.1.4.1.1050.25.18 | NodetrapRPSFail | The agent will send a trap of this type when redundant power supply is failed. | ||
| 1.3.6.1.4.1.1050.25.19 | NodetrapRPSFanFail | The agent will send a trap of this type when redundant power supply fan is failed. | ||
| 1.3.6.1.4.1.1050.25.20 | NodetrapBiosEventLog | The agent will send a trap of this type when bios has new eventlog. | ||
| 1.3.6.1.4.1.1050.25.21 | NodetrapBiosEventLogUtilization | The agent will send a trap of this type when bios eventlog utilization exceeds threshold. | ||
| 1.3.6.1.4.1.1050.25.22 | NodetrapCPUAbnormal | The agent will send a trap of this type when CPU has internal error. | ||
| 1.3.6.1.4.1.1050.25.23 | NodetrapAssetChange | The agent will send a trap of this type when asset is changed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisketteDrvIndex | INTEGER { a(1), b(2) } | ||
| RdmStatus | INTEGER { notExist(0), good(1), bad(2), disabled(3) } | ||
| SlotsType | INTEGER { |