ATM-OPT-MIB
112 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.35 | Tablecdx6500PPCTATMPortTable | not-accessible | mandatory | This table contains ATM Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1 | Rowcdx6500PPCTATMPortEntry | not-accessible | mandatory | Entries in the ATM Port Configuration Table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.1 | ColumnatmPCfgPortNumber | read-only | mandatory | Port number of this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.2 | ColumnatmPCfgPortType | read-only | mandatory | Port type of the Port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.3 | ColumnatmPCfgMaxVPIRange | read-only | deprecated | This parameter specifies the maximum VPI value that any station on this port can operate with. Increasing this value has the effect of decreasing the maximum V… |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.4 | ColumnatmPCfgMaxVCIRange | read-only | deprecated | This parameter specifies the maximum VCI value that any station on this port can operate with. Increasing this value has the effect of decreasing the maximum V… |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.5 | ColumnatmPCfgLinkAssuranceTimer | read-only | deprecated | If PVC Link Assurance Method is set to LOOPBACK, this is the amount of time in seconds between sending F5 loopback cells . |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.6 | ColumnatmPCfgLinkAssuranceCount | read-only | deprecated | If PVC Link Assurance Method is set to LOOPBACK, this is the number of retries sent before declaring that the link is down . |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.7 | ColumnatmPCfgCCActDeactTimer | read-only | deprecated | If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the amount of time in seconds between retransmissions of Activate or Deactivate cells. |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.8 | ColumnatmPCfgCCActDeactCount | read-only | deprecated | If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the number of times to send an Activate or Deactivate cell before declaring that the negotiat… |
| 1.3.6.1.4.1.449.2.1.2.1.1.35.1.9 | ColumnatmPCfgVCCTrafficPrioritization | read-only | mandatory | All station VCCs that operate on the port must run with the same traffic prioritization dicipline. This port parameter specifies the priorization as follows: D… |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.10 | Tablecdx6500SPCTATMStationTable | not-accessible | mandatory | This table contains ATM Station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1 | Rowcdx6500SPCTATMStationEntry | not-accessible | mandatory | Entries in the ATM Station Configuration Table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.1 | ColumnatmSCfgPortNumber | read-only | mandatory | The ATM port number corresponding to this station. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.2 | ColumnatmSCfgStnNumber | read-only | mandatory | The number of the configured ATM Station. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.3 | ColumnatmSCfgVPI | read-only | mandatory | The Virtual Path Identifier (VPI) is the provisioned virtual path number for the station of circuit type PVC on the ATM port. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.4 | ColumnatmSCfgVCI | read-only | mandatory | The Virtual Circuit Identifier (VCI) is the provisioned virtual circuit number for the station of circuit type PVC on the ATM port. |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.5 | ColumnatmSCfgLinkAssuranceMethod | read-only | mandatory | PVC link assurance method to use: DISABLED - No checking is performed LOOPBACK - Periodically send a loopback cell NEGOTIATE - Negotiate use of CC cells ENABLE… |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.6 | ColumnatmSCfgTrafficServiceCategory | read-only | mandatory | The service category is the traffic type for the operation of the station. The traffic types are: UBR - Unspecified Bit Rate CBR - Constant Bit Rate VBR - Vari… |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.7 | ColumnatmSCfgPeakCellRate | read-only | mandatory | This parameter (PCR) specifies the rate (cells per second) the network agrees to receive cells from the station PCR is configuredin multiples of 20 cells per s… |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.8 | ColumnatmSCfgVBRTrafficShaping | read-only | mandatory | Specifies whether a station configured for VBR traffic category conforms to single or dual leaky bucket traffic shaping. Single leaky bucket means the traffic … |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.9 | ColumnatmSCfgVCCPriorityLevel | read-only | mandatory | This parameter controls the priority of the station VCC in comparison to other stations within the same service category (either UBR or VBR). For VBR traffic c… |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.10 | ColumnatmSCfgSustainableCellRate | read-only | deprecated | This parameter (SCR) specifies the rate (cells per second) the network agrees to receive cells from the station. This parameter characterizes the amount of sus… |
| 1.3.6.1.4.1.449.2.1.2.1.3.10.1.11 | ColumnatmSCfgMaximumBustSize | read-only | deprecated | Maximum burst size for VBR traffic in cells |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.36 | Nodecdx6500PPSTATMPStatsTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.36.1 | Tablecdx6500PPSTATMPortTable | not-accessible | mandatory | This table contains ATM Port Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.1.1 | Rowcdx6500PPSTATMPortEntry | not-accessible | mandatory | Entries in the ATM Port Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.1 | ColumnatmPStatsPortNumber | read-only | mandatory | The port number of the ATM port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.2 | ColumnatmPStatsPortType | read-only | mandatory | Port type of this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.1.1.3 | ColumnatmPStatsPortStatus | read-only | mandatory | Specifies the current port status. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2 | Tablecdx6500PPSTATMDataSummaryTable | not-accessible | mandatory | This table contains ATM Port Data Summary Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1 | Rowcdx6500PPSTATMDataSummaryEntry | not-accessible | mandatory | Entries in the ATM Port Data Summary Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.1 | ColumnatmDataSummPortNumber | read-only | mandatory | The port number of the ATM port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.2 | ColumnatmPStatsOctetsInTotal | read-only | mandatory | Number of characters received since last boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.3 | ColumnatmPStatsOctetsOutTotal | read-only | mandatory | Number of characters transmitted since last boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.4 | ColumnatmPStatsOctetsInPerSec | read-only | mandatory | Average number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.5 | ColumnatmPStatsOctetsOutPerSec | read-only | mandatory | Average number of characters transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.6 | ColumnatmPStatsFramesInTotal | read-only | mandatory | Number of frames received since last boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.7 | ColumnatmPStatsFramesOutTotal | read-only | mandatory | Number of frames transmitted since last boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.8 | ColumnatmPStatsFramesInPerSec | read-only | mandatory | Average number of frames received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.9 | ColumnatmPStatsFramesOutPerSec | read-only | mandatory | Average number of frames transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.10 | ColumnatmPStatsOAMCellInTotal | read-only | mandatory | Number of OAM Cells received since last boot or statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.11 | ColumnatmPStatsOAMCellOutTotal | read-only | mandatory | Number of OAM Cells transmitted since last boot or statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.12 | ColumnatmPStatsATMCellInTotal | read-only | mandatory | Number of ATM Cells received since last boot or statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.13 | ColumnatmPStatsATMCellOutTotal | read-only | mandatory | Number of ATM Cells transmitted since last boot or statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.14 | ColumnatmPStatsErrorCellCor | read-only | mandatory | HEC(Cor) errors in Physical Layer. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.15 | ColumnatmPStatsErrorCellDis | read-only | mandatory | HEC(Dis) errors in Physical Layer. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.16 | ColumnatmPStatsCellDelineateState | read-only | mandatory | ATM Physical Layer state. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.17 | ColumnatmPStatsCellStateChangeTime | read-only | mandatory | The state change time in ATM Physical Layer. |
| 1.3.6.1.4.1.449.2.1.3.1.1.36.2.1.18 | ColumnatmPStatsDiscardedFrames | read-only | mandatory | The total number of dicarded frames. |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.11 | Nodecdx6500SPSTATMSStatsTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1 | TableatmSGenStatsTable | not-accessible | mandatory | This table contains ATM Station Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1 | Rowcdx6500atmSGenStatsEntry | not-accessible | mandatory | Entries in the ATM Station Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.1 | ColumnatmSGenStatsPortNumber | read-only | mandatory | The ATM port number corresponding to this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.2 | ColumnatmSGenStatsStnNumber | read-only | mandatory | The number of the ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.3 | ColumnatmSStatsStnStatus | read-only | mandatory | Status of the station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.4 | ColumnatmSStatsVPI | read-only | mandatory | The VPI of ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.5 | ColumnatmSStatsVCI | read-only | mandatory | The VCI of the ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.6 | ColumnatmSStatsAdmState | read-only | mandatory | The VCI of the ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.7 | ColumnatmSStatsPeer | read-only | mandatory | The Peer state of the ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.1.1.8 | ColumnatmSStatsAdjacent | read-only | mandatory | The Adjacent state of the ATM Station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2 | TableatmSDataSummaryStatsTable | not-accessible | mandatory | This table contains ATM Station Data Summary Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1 | Rowcdx6500atmSDataSummaryStatsEntry | not-accessible | mandatory | Entries in the ATM Station Data Summary Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.1 | ColumnatmSDataSummStatsPortNumber | read-only | mandatory | The ATM port number corresponding to this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.2 | ColumnatmSDataSummStatsStnNumber | read-only | mandatory | The number of the ATM station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.3 | ColumnatmSStatsOctetsInTotal | read-only | mandatory | Number of characters received since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.4 | ColumnatmSStatsOctetsOutTotal | read-only | mandatory | Number of characters transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.5 | ColumnatmSStatsFrameInTotal | read-only | mandatory | Number of frames transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.6 | ColumnatmSStatsFrameOutTotal | read-only | mandatory | Number of frames transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.7 | ColumnatmSStatsF5CellInTotal | read-only | mandatory | Number of F5 Cells received since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.8 | ColumnatmSStatsF5CellOutTotal | read-only | mandatory | Number of F5 Cells transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.9 | ColumnatmSStatsAISCellInTotal | read-only | mandatory | Number of AIS Cells received since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.10 | ColumnatmSStatsRDICellInTotal | read-only | mandatory | Number of RDI Cells received since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.11 | ColumnatmSStatsRDICellOutTotal | read-only | mandatory | Number of RDI Cells transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.12 | ColumnatmSStatsCCCellInTotal | read-only | mandatory | Number of CC Cells received since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.13 | ColumnatmSStatsCCCellOutTotal | read-only | mandatory | Number of CC Cells transmitted since last node boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.14 | ColumnatmSStatsVCFailure | read-only | mandatory | The state of VC Failures. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.15 | ColumnatmSStatsVCAssuranceState | read-only | mandatory | The state of VC AssuranceState. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.16 | ColumnatmSStatsOctetsInPerSec | read-only | mandatory | The number of Octests in per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.17 | ColumnatmSStatsOctetsOutPerSec | read-only | mandatory | The number of Octests out per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.18 | ColumnatmSStatsFramesInPerSec | read-only | mandatory | The number of frames in per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.19 | ColumnatmSStatsFramesOutPerSec | read-only | mandatory | The number of frames out per second. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.20 | ColumnatmSStatsDiscardedFrames | read-only | mandatory | The total number of frames discarded. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.21 | ColumnatmSStatsCIBitInForIWF | read-only | mandatory | The total number of CI Bit in. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.22 | ColumnatmSStatsCIBitOutForIWF | read-only | mandatory | The total number of CI Bit out. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.23 | ColumnatmSStatsCLPBitInForIWF | read-only | mandatory | The total number of CLP Bit in. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.24 | ColumnatmSStatsCLPBitOutForIWF | read-only | mandatory | The total number of CLP Bit out. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.25 | ColumnatmSStatsUUBitInForIWF | read-only | mandatory | The total number of UU Bit in. |
| 1.3.6.1.4.1.449.2.1.3.1.3.11.2.1.26 | ColumnatmSStatsUUBitOutForIWF | read-only | mandatory | The total number of UU Bit out. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.24 | Nodecdx6500ContATMTable | |||
| 1.3.6.1.4.1.449.2.1.4.24.1 | Tablecdx6500ATMPContTable | not-accessible | mandatory | Control parameters for ATM ports. |
| 1.3.6.1.4.1.449.2.1.4.24.1.1 | Rowcdx6500ATMPContEntry | not-accessible | mandatory | Each control applies to a single ATM port. |
| 1.3.6.1.4.1.449.2.1.4.24.1.1.1 | ColumnatmPContPortNumber | not-accessible | mandatory | Port number of the ATM port. |
| 1.3.6.1.4.1.449.2.1.4.24.1.1.2 | ColumnatmPContPortControl | write-only | mandatory | Control operations for the specified ATM port. boot - Boots the ATM port resetstats - Resets the ATM port statistics. |
| 1.3.6.1.4.1.449.2.1.4.24.2 | Tablecdx6500ATMSContTable | not-accessible | mandatory | Control parameters for ATM stations. |
| 1.3.6.1.4.1.449.2.1.4.24.2.1 | Rowcdx6500ATMSContEntry | not-accessible | mandatory | Each control applies to a single ATM station. |
| 1.3.6.1.4.1.449.2.1.4.24.2.1.1 | ColumnatmSContPortNumber | not-accessible | mandatory | The ATM port number corresponding to this station. |
| 1.3.6.1.4.1.449.2.1.4.24.2.1.2 | ColumnatmSContStnNumber | not-accessible | mandatory | ATM station number. |
| 1.3.6.1.4.1.449.2.1.4.24.2.1.3 | ColumnatmSContStnControl | write-only | mandatory | Control operations for the specified ATM station. boot - Boots the ATM station resetstats - Resets the ATM station statistics. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |