ATM-REROUTING-MIB
71 objects
The MIB module for managing the ATM Forum Domain-based rerouting for active point-to-point calls v1.0
Imported Objects
| ATM-MIB | atmVclVci atmVclVpi atmVplVpi |
| ATM-TC-MIB | AtmAddr |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.9 | NodeatmfSignalling | |||
| 1.3.6.1.4.1.353.5.9.3 | NodeatmfRerouting | |||
| 1.3.6.1.4.1.353.5.9.3.1 | IdentityatmfreroutingMIB | The MIB module for managing the ATM Forum Domain-based rerouting for active point-to-point calls v1.0 | ||
| 1.3.6.1.4.1.353.5.9.3.1.1 | NodereroutingMIBObjects | |||
| 1.3.6.1.4.1.353.5.9.3.1.1.1 | NodereroutingBaseGroup | |||
| 1.3.6.1.4.1.353.5.9.3.1.1.1.1 | ScalarreroutingVersion | read-only | current | The version of the ATM Forum rerouting specification that the software in this switching system is capable of executing. |
| 1.3.6.1.4.1.353.5.9.3.1.1.1.2 | ScalarreroutingCapabilitiesSupported | read-only | current | Indicates the rerouting mechanisms supported on this switching system |
| 1.3.6.1.4.1.353.5.9.3.1.1.1.3 | ScalarreroutingHardReroutingTime | read-write | current | The timeout value in milliseconds for a hard rerouting operation to be completed. The hard rerouting timer is set to this value when a hard rerouting operation… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2 | TablereroutingFilterTable | not-accessible | current | The table is used to configure the rerouting services of a call during the initial call establishment. The configuration includes: - the availability of rerout… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1 | RowreroutingFilterEntry | not-accessible | current | Each entry in this table defines a filter to match against incoming/outgoing setups on inter-domain interfaces. Each entry also contains the configuration of t… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.1 | ColumnreroutingFilterIndex | not-accessible | current | An arbitrary integer uniquely identifying a filter in this table. |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.2 | ColumnreroutingFilterIfDirection | read-create | current | The combination of this object and the corresponding instance of reroutingFilterInterface is one selection criteria for this filter entry. If the value of this… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.3 | ColumnreroutingFilterInterface | read-create | current | The combination of this object and the corresponding instance of reroutingIfDirection is one selection criteria for this filter entry. This object restricts th… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.4 | ColumnreroutingFilterConnKind | read-create | current | Indicates if the configuration defined in this entry applies to: - 'svcAndSpvcNotInitiator' to switched virtual channels only. - 'spvcInitiator' to soft perman… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.5 | ColumnreroutingFilterServiceCategory | read-create | current | This object restricts the scope of the filter to calls belonging to service categories represented by this object. |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.6 | ColumnreroutingFilterCallingPartyPrefix | read-create | current | The combination of this object and the corresponding instance of reroutingFilterCallingPartyLength is one selection criteria for this record. To match this sel… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.7 | ColumnreroutingFilterCallingPartyLength | read-create | current | This object specifies the number of bits in reroutingFilterCallingParty that shall be used when matching against the calling party of a new call setup. |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.8 | ColumnreroutingFilterCalledPartyPrefix | read-create | current | The combination of this object and the corresponding instance of reroutingFilterCalledPartyLength is one selection criteria for this record. To match this sele… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.9 | ColumnreroutingFilterCalledPartyLength | read-create | current | This object specifies the number of bits in reroutingFilterCalledParty that shall be used when matching against the called party of a new call setup. |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.10 | ColumnreroutingFilterNetworkServicesAvailable | read-create | current | Indicates what network rerouting services are locally available for a call when it matches this filter. If a rerouting service is not available, the negotiatio… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.11 | ColumnreroutingFilterHardReroutingServiceRequest | read-create | current | Indicates which hard rerouting service is requested by the network on behalf of the user when a setup matches this address filter. 'none' means that no hard re… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.12 | ColumnreroutingFilterSoftReroutingServiceRequest | read-create | current | Indicates which soft rerouting service is requested by the network on behalf of the user when a setup matches this address filter. 'none' means that no soft re… |
| 1.3.6.1.4.1.353.5.9.3.1.1.2.1.13 | ColumnreroutingFilterRowStatus | read-create | current | To create, delete, activate and de-activate a filter for the configuration of the rerouting services. |
| 1.3.6.1.4.1.353.5.9.3.1.1.3 | TablereroutingVpTable | not-accessible | current | The table used to describe the rerouting attributes of a Pt-to-Pt svp or spvp. The entire reroutingVpTable is read-only reflecting the fact that reroutable con… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1 | RowreroutingVpEntry | not-accessible | current | Each entry in this table contains the rerouting attributes of a SVP or Soft PVP connection. The content of this table reflects only the rerouting values associ… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.1 | ColumnreroutingVpNodeRole | read-only | current | Indicates if the switch is the source node or the destination node for the call. |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.2 | ColumnreroutingVpRemoteNodeAddress | read-only | current | Contains the ATM address of the remote edge node |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.3 | ColumnreroutingVpHardReroutingServiceActivated | read-only | current | Indicates which hard rerouting service is activated for this call. 'none' means that no hard rerouting service is activated for the call. On a switch, 'dbrInte… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.4 | ColumnreroutingVpSoftReroutingServiceActivated | read-only | current | Indicates which soft rerouting service is activated for this call. 'none' means that no soft rerouting service is activated for the call. 'dbrIntraDomainAsymme… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.5 | ColumnreroutingVpReroutingState | read-only | current | Indicates if a rerouting operation is in progress and what type of rerouting operation is in progress. 'idle' indicates that no rerouting operation is in progr… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.6 | ColumnreroutingVpReroutingOperationSuccessCounter | read-only | current | Indicates the number of rerouting operations initiated by this node that succeeded on this call. The establishment of the initial call is not counted |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.7 | ColumnreroutingVpReroutingOperationFailuresCounter | read-only | current | Indicates the number of rerouting operations initiated by this node that failed on this call. |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.8 | ColumnreroutingVpLocalIncarnationNumber | read-only | current | Indicates the current local incarnation number associated with the call. The value contained in this object is the incarnation number of the last reroute setup… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.9 | ColumnreroutingVpRemoteIncarnationNumber | read-only | current | Indicates the current remote incarnation number associated with the call. The value contained in this object is the incarnation number of the last reroute setu… |
| 1.3.6.1.4.1.353.5.9.3.1.1.3.1.10 | ColumnreroutingVpExtendedReroutingState | read-only | current | Indicates the current rerouting state of the call, as defined in the rerouting Finite State Machine. |
| 1.3.6.1.4.1.353.5.9.3.1.1.4 | TablereroutingVcTable | not-accessible | current | The table used to describe the rerouting related attributes of a Pt-to-Pt svc or spvc. The entire reroutingVcTable is read-only reflecting the fact that rerout… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1 | RowreroutingVcEntry | not-accessible | current | Each entry in this table contains the rerouting attributes of a SVC or Soft PVC connection. The content of this table reflects only the rerouting values associ… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.1 | ColumnreroutingVcNodeRole | read-only | current | Indicates if the switch is the source node or the destination node for the call. |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.2 | ColumnreroutingVcRemoteNodeAddress | read-only | current | Contains the ATM address of the remote edge node |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.3 | ColumnreroutingVcHardReroutingServiceActivated | read-only | current | Indicates which hard rerouting service is activated for this call. 'none' means that no hard rerouting service is activated for the call. On a switch, 'dbrInte… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.4 | ColumnreroutingVcSoftReroutingServiceActivated | read-only | current | Indicates which soft rerouting service is activated for this call. 'none' means that no soft rerouting service is activated for the call. 'dbrIntraDomainAsymme… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.5 | ColumnreroutingVcReroutingState | read-only | current | Indicates if a rerouting operation is in progress and what type of rerouting operation is in progress. 'idle' indicates that no rerouting operation is in progr… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.6 | ColumnreroutingVcReroutingOperationSuccessCounter | read-only | current | Indicates the number of rerouting operations initiated by this node that succeeded on this call. The establishment of the initial call is not counted |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.7 | ColumnreroutingVcReroutingOperationFailuresCounter | read-only | current | Indicates the number of rerouting operations initiated by this node that failed on this call. |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.8 | ColumnreroutingVcLocalIncarnationNumber | read-only | current | Indicates the current local incarnation number associated with the call. The value contained in this object is the incarnation number of the last reroute setup… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.9 | ColumnreroutingVcRemoteIncarnationNumber | read-only | current | Indicates the current remote incarnation number associated with the call. The value contained in this object is the incarnation number of the last reroute setu… |
| 1.3.6.1.4.1.353.5.9.3.1.1.4.1.10 | ColumnreroutingVcExtendedReroutingState | read-only | current | Indicates the current rerouting state of the call, as defined in the rerouting Finite State Machine. |
| 1.3.6.1.4.1.353.5.9.3.1.2 | NodereroutingMIBConformance | |||
| 1.3.6.1.4.1.353.5.9.3.1.2.1 | NodereroutingMIBCompliances | |||
| 1.3.6.1.4.1.353.5.9.3.1.2.1.1 | CompliancereroutingMIBCompliance | current | The compliance statement for entities which implement the ATM rerouting MIB. Groups of required rerouting objects for configuring and monitoring the domain-bas… | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2 | NodereroutingMIBGroups | |||
| 1.3.6.1.4.1.353.5.9.3.1.2.2.1 | GroupreroutingBaseSwMinGroup | current | A collection of mandatory rerouting objects which describe the rerouting services supported in a switching system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.2 | GroupreroutingFilterSwMinGroup | current | A collection of mandatory objects used for the configuration of rerouting services in a switching system when using filters. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.3 | GroupreroutingVcSwMinGroup | current | A collection of mandatory per Vc rerouting objects describing the state of the rerouting services associated to a call in a switching system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.4 | GroupreroutingBaseSwOptionalGroup | current | A collection of optional rerouting object which describe the timer configuration when hard rerouting service is supported in a switching system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.5 | GroupreroutingFilterSwOptionalGroup | current | A collection of optional objects used for the configuration of rerouting services in a switching system when using filters. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.6 | GroupreroutingVpSwOptionalGroup | current | A collection of optional per Vp rerouting objects describing the state of the rerouting services associated to a call in a switching system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.7 | GroupreroutingVcSwOptionalGroup | current | A collection of optional per Vc rerouting objects describing the state of the rerouting services associated to a call in a switching system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.8 | GroupreroutingBaseEsMinGroup | current | A collection of mandatory rerouting objects which describe the rerouting services supported in an end system. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.9 | GroupreroutingFilterEsMinGroup | current | A collection of mandatory objects used for the request of rerouting services in this end system device when using filters. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.10 | GroupreroutingVcEsMinGroup | current | A collection of mandatory rerouting objects describing the rerouting services associated to a call in an end system device. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.11 | GroupreroutingFilterEsOptionalGroup | current | A collection of optional objects used for the configuration of rerouting services in this end system device when using filters. | |
| 1.3.6.1.4.1.353.5.9.3.1.2.2.12 | GroupreroutingVpEsOptionalGroup | current | A collection of optional rerouting objects describing the rerouting services associated to a call in an end system device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ExtendedReroutingState | INTEGER { null (1), reroutingIdle (2), hardRerouteTriggered (3), hardRerouteProceeding (4), hardRerouteIndicated (5), hardRerouteInitiated (6), softRerouteTriggered(7), softRerouteProceeding(8), softRerouteInitiated(9), awaitingSwitchover(10) } | current | Describes the different states of the rerouting finite state machine. The states varies depending on the rerouting services activated for a call and on the role of the edge switch for the call (source vs destination nod… |
| HardReroutingServicesClass | INTEGER { none (1), dbrInterDomainHardRerouting (2), dbrIntraDomainHardRerouting (3) } | current | Indicates the service of the hard rerouting services class which is requested/activated for a call. |
| NetworkReroutingCapabilities | BITS { dbrHardRerouting (0), dbrAsymmetricSoftRerouting (1), dbrSymmetricSoftRerouting (2) } | current | Indicates the network rerouting services available on a switching system. |
| ReroutingNodeRole | INTEGER { other (1), sourceNode (2), destinationNode (3) } | current | Describes whether the node is the source node or the destination node for a call. |
| ReroutingState | INTEGER { idle (1), hardReroute (2), softReroute (3) } | current | Indicates the type of the rerouting operation in progress. The following mapping is done between the rerouting states of the FSM and the values of this object: FSM state ReroutingState null -> idle reroutingIdle -> idle… |
| SoftReroutingServicesClass | INTEGER { none (1), dbrIntraDomainAsymmetricSoftRerouting (2), dbrIntraDomainSymmetricSoftRerouting (3) } | current | Indicates the service of the soft rerouting services class which is requested/activated for a call. |